Meddelelser fra Søfartsstyrelsen B. Skibes bygning og udstyr m.v. Bilag 1 A, CARGO SHIP SAFETY CERTIFICATE, 1. juli 2002
Karakter C
genskabt fra tekst. En karakter siger, hvordan et dokuments struktur er hentet, ikke hvor pålidelig loven er.
Adresse https://gelex.eu/eli/DK/regulation/retsinfo/2002/9217@2002-05-23/da
Indhold
DENMARK
CARGO SHIP SAFETY CERTIFICATE This certificate shall be supplemented by a Record of Equipment (Form C) Issued under the provisions of the INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974, as modified by the Protocol of 1988 relating thereto under the authority of the Government of DENMARK
by DANISH MARITIME AUTHORITY
Particulars of ship
Name of ship
Distinctive number or letters
Port of registry
Gross tonnage
Deadweight of ship (metric tons) 1)
Length of ship (regulation III/3.12)
Sea areas in which ship is certified to operate (regulation IV/2)
IMO Number
Type of ship 2) Bulk carrier Oil tanker Chemical tanker Gas carrier Cargo ship other than any of the above
Date on which keel was laid or ship was at a similar stage of construction or, where applicable, date on which work for an alteration or modification of a major character was commenced
THIS IS TO CERTIFY:
1. That the ship has been surveyed in accordance with the requirements of regulation I/8, I/9 and I/10 of the Convention.
2. That the survey showed that:
the condition of the structure, machinery and equipment as defined in regulation I/10 was satisfactory and the ship complied with the relevant requirements of chapter II-1 and chapter II-2 of the Convention (other than those relating to fire safety systems and appliances and fire control plans);
2.2 the last two inspections of the outside of the ship's bottom took place on
and
(dates)
2.3 the ship complied with the requirements of the Convention as regards fire safety systems and appliances and fire control plans;
2.4 the life-saving appliances and the equipment of the lifeboats, liferafts and rescue boats were provided in accordance with the requirements of the Convention;
2.5 the ship was provided with a line-throwing appliance and radio installations used in life-saving appliances in accordance with the requirements of the Convention;
2.6 the ship complied with the requirements of the Convention as regards radio installations;
2.7 the functioning of the radio installation used in life-saving appliances complied with the requirements of the Convention;
2.8 the ship complied with the requirements of the Convention as regards shipborne navigational equipment, means of embarkation for pilots and nautical publications;
2.9 the ship was provided with lights, shapes, means of making sound signals and distress signals, in accordance with the requirements of the Convention and the International Regulations for Preventing Collisions at Sea in force;
2.10 in all other respects the ship complied with the relevant requirements of the Convention.
3 That an Exemption Certificate has/has not3) been issued.
This certificate is valid until 4)subject to the
annual, intermediate and periodical surveys and inspections of the outside of the ship’s bottom in accordance with the regulation I/8, I/9 and I/10 of the Convention.
Issued at
(Place of issue of certificate)
Date of issue) (Signature of authorized official issuing the certificate)
(Seal or stamp of the issuing authority, as appropriate)
Endorsement for annual and intermediate surveys relating to structure, machinery and equipment referred to in paragraph 2.1 of this certificate
THIS IS TO CERTIFY that, at a survey required by regulation I/10 of the Convention, the ship was found to comply with the relevant requirements of the Convention.
Annual survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Annual/ Intermediate 5) survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Annual/Intermediate5) survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Annual survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Annual/intermediate survey in accordance with regulation I/14(h)(iii)
THIS IS TO CERTIFY that, at an annual/intermediate6) surveyed in accordance with regulation I/10 and I/14(h)(iii) of the Convention, the ship was found to comply with the relevant requirements of the Convention.
Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Endorsement for inspections of the outside of the ship’s bottom7)
THIS IS TO CERTIFY that, at an inspection required by regulation I/10 of the Convention, the ship was found to comply with the relevant requirements of the Convention.
First inspection: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Second inspection: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Endorsement for annual and periodical surveys relating to life-saving appliances and other equipment referred to in paragraphs 2.3, 2.4, 2.5, 2.8 and 2.9 of this certificate
THIS IS TO CERTIFY that, at a survey required by regulation I/8 of the Convention, the ship was found to comply with the relevant requirements of the Convention.
Annual survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Annual/Periodical8) survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Annual/Periodical8) survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Annual survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Annual/periodical survey in accordance with regulation I/14(h)(iii)
THIS IS TO CERTIFY that, at an annual/periodical9) survey in accordance with regulations I/8 and I/14(h)(iii) of the Convention, the ship was found to comply with the relevant requirements of the Convention.
Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Endorsement for annual and periodical surveys relating to radio installations referred to in paragraphs 2.6 and 2.7 of this certificate
THIS IS TO CERTIFY that, at a survey required by regulation I/9 of the Convention, the ship was found to comply with the relevant requirements of the Convention.
Periodical survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Periodical survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Periodical survey: Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Periodical survey: Signed:
(Signature of authorized official)
Place:
Date:
( Seal or stamp of the issuing authority, as appropriate)
Periodical survey in accordance with regulation I/14(h)(iii)
THIS IS TO CERTIFY that, at a periodical survey in accordance with regulations I/9 and I/14(h)(iii) of the Convention, the ship was found to comply with the relevant requirements of the Convention.
Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Endorsement to extend the certificate if valid for less than 5 years where regulation I/14(c) applies
The ship complies with the relevant requirements of the Convention, and this certificate shall, in accordance with regulation I/14(c) of the Convention, be accepted as valid until
Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Endorsement where the renewal survey has been completed and regulation I/14(d) applies
The ship complies with the relevant requirements of the Convention, and this certificate shall, in accordance with regulation I/14(d) of the Convention, be accepted as valid until
Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Endorsement to extend the validity of the certificate until reaching the port of survey or a period of grace where regulation I/14(e) or I/14(f) applies
This certificate shall, in accordance with regulation I/14(e)/I/14(f) 10) of the Convention, be
accepted as valid until
Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
Endorsement for advancement of anniversary date where regulation I/14(h) applies
In accordance with regulation I/14(h) of the Convention, the new anniversary date is
Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
In accordance with regulation I/14(h) of the Convention, the new anniversary date is
Signed:
(Signature of authorized official)
Place:
Date:
(Seal or stamp of the issuing authority, as appropriate)
DENMARK
RECORD OF EQUIPMENT FOR THE CARGO SHIP SAFETY CERTIFICATE (Form C) This Record shall be permanent attached to the Cargo Ship Safety Certificate RECORD OF EQUIPMENT FOR COMPLIANCE WITH THE INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974 as modified by the Protocol of 1988 relating thereto
1 Particulars of ship
Name of ship
Distinctive number or letters
Minimum number of persons with required qualifications to operate the radio installations
2 Details of life-saving appliances
1 Total number of persons for which life-saving appliances are provided
Port side Starboard side
2 Total numbers of lifeboats
2.1 Total numbers of persons accommodated by them
2.2 Number of totally enclosed lifeboats (regulation III/3 1 and LSA Code section 4.6)
2.3 Number of lifeboats with a self contained air support system (regulation III/3 1 and LSA Code section 4.8)
2.4 Number of fire-protected lifeboats (regulation III/3 1 and LSA Code section 4.9)
2.5 Other lifeboats
2.5.1 Number
2.5.2 Type
2 Details of life-saving appliances (continued)
2.6 Number of free-fall lifeboats
2.6.1 Totally enclosed (regulation III/3 1 and LSA Code section 4.7)
2.6.2 Self-contained (regulation III/3 1 and LSA Code section 4.8)
2.6.3 Fire-protected (regulation III/3 1 and LSA Code section 4.9)
3 Number of motor lifeboats included in the total lifeboats shown above
3.1 Number of lifeboats fitted with searchlights
4. Number of rescue boats
4.1 Number of boats which are included in the total lifeboats shown above
5 Liferafts
5.1 Those for which approved launching appliances are required
5.1.1 Number of liferafts
5.1.2 Number of persons accommodated by them
5.2 Those for which approved launching appliances are not required
5.2.1 Number of liferafts
5.2.2 Number of persons accommodated by them
5.3 Number of liferafts required by regulation III/31.1.4
6 Number of lifebuoys
7 Number of lifejackets
8 Immersion suits
8.1 Total number
8.2 Number of suits complying with the requirements for lifejackets
9 Number of thermal protective aids 11)
10 Radio installations used in life-saving appliances
10.1 Number of radar transponders
10.2 Number of two-way VHF Radiotelephone apparatus
3 Details of radio facilities
Item Actual provision
1 Primary systems
1.1 VHF radio installation
1.1.1 DSC encoder
1.1.2 DSC watch receiver
1.1.3 Radiotelephony
1.2 MF radio installation
1.2.1 DSC encoder
1.2.2 DSC watch receiver
1.2.3 Radiotelephony
1.3 MF/HF radio installation
1.3.1 DSC encoder
1.3.2 DSC watch receiver
1.3.3 Radiotelephony
1.3.4 Direct-printing radiotelegraphy
1.4 INMARSAT ship earth station
2 Secondary means of alerting
3 Facilities for reception of maritime safety information
3.1 NAVTEX receiver
3.2 EGC receiver
3.3 HF direct-printing radiotelegraph receiver
4 Satellite EPIRB
4.1 COSPASS-SARSAT
4.2 INMARSAT
5 VHF EPIRB
6 Ship’s radar transponder
4 Methods used to ensure availability of radio facilities (regulations IV/15.6 and 15.7)
4.1 Duplication of equipment
4.2 Shore based maintenance
4.3 At-sea maintenance capability
5 Details of navigational systems and equipment
Item Actual provision
1.1 Standard magnetic compass 12)
1.2 Spare magnetic compass12) 1
1.3 Gyro-compass12)
1.4 Gyro-compass heading repeater12)
1.5 Gyro-compass bearing repeater12)
1.6 Heading or track control system12)
1.7 Pelorus or compass bearing device12)
1.8 Means of correcting heading and bearings
1.9 Transmitting heading device (THD) 12)
2.1 Nautical charts/Electronic chart display and information system (ECDIS)13) 12)
2.2 Back-up arrangements for ECDIS
2.3 Nautical publications
2.4 Back-up arrangements for electronic nautical publications
3.1 Receiver for a global navigation satellite system/terrestrial radionavigation system13) 12)
3.2 9 GHz radar 12)
3.3 Second radar (3 GHz/9 GHz 13) 12)
3.4 Automatic radar plotting aid (ARPA) 12)
3.5 Automatic tracking aid
3.6 Second automatic tracking aid
3.7 Electronic plotting aid 12)
4 Automatic identification system (AIS)
5 Voyage data recorder (VDR)
6.1 Speed and distance measuring device (through the water) 12)
6.2 Speed and distance measuring device (over the ground in the forward and athwartship direction) 12)
7 Echo-sounding device 12)
5 Details of navigational systems and equipment (continued)
Item Actual provision
8.1 Rudder, propeller, thrust, pitch and operational mode indicator14)
8.2 Rate-of-turn indicator14)
9 Sound reception system14)
10 Telephone to emergency steering position14)
11 Daylight signaling lamp14)
12 Radar reflector14)
13 International Code of Signals
THIS IS TO CERTIFY that this Record is correct in all respects
Issued at
(Place of issue of the record)
(Date of issue) (Signature of duly authorized official issuing the record)
(Seal or stamp of the issuing authority, as appropriate)
1 )For oil tankers, chemical tankers and gas carriers only
2) Delete as appropriate
3) Delete as appropriate
4) Insert the date of expiry as specified by the Administration in accordance with regulation I/14(a) of the Convention. The day and month of this date correspond to the anniversary date as defined in regulation I/2(n) of the Convention, unless amended in accordance with regulation I/14(h).
5) Delete as appropriate
6) Delete as appropriate
7) Provisions may be made for additional inspections
8) Delete as appropriate
9) Delete as appropriate
10) Delete as appropriate
11) Excluding those required by LSA Code paragraphs 4.1.5.1.24, 4.4.8.31 and 5.1.2.2.13
12) Alternative means of meeting this requirement are permitted under regulation V/19. In case of other means they shall be specified
13) Delete as appropriate
14) Alternative means of meeting this requirement are permitted under regulation V/19. In case of other means they shall be specified