Address https://gelex.eu/eli/EU/decision/2021/1870@2021-10-22/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
   3. Article 3
   4. Article 4
   5. Article 5
   6. Article 6
   7. Article 7
   8. Article 8
   9. Article 9
3. ANNEX
4. ANNEX I EU Ecolabel criteria for awarding the EU Ecolabel to cosmetic products
5. FRAMEWORK Aims of the criteria
6. a)Note:
7. b) Table 1 Threshold levels applicable to substances for cosmetic products (% weight by weight, %w/w), shown by criterion. Abbreviations: CLP: Classification, Labelling and Packaging; CMR: carcinogenic, mutagenic, toxic for reproduction; N/A: not applicable
8. EU ECOLABEL CRITERIA FOR COSMETIC PRODUCTS
9. Criterion 1 Table 2 CDV limits
10. Criterion 2
11. Criterion 3
12. Criterion 4
13. 4 (a) Table 4 Table 5 Restricted hazard classes, categories and associated hazard statement codes Derogations to restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 and applicable conditions
14. (ii) Table 6 Table 7 Excluded hazard classes, categories and associated hazard statement codes Derogations to restrictions on substances classified as CMR under Regulation (EC) No 1272/2008 and applicable conditions
15. 4 (b) Notes: [1][2][3][4]
16. 4 (d)
17. 4 (e)
18. 4 (f)
19. 4 (g)
20. Criterion 5
21. (i)Note:
22. (ii)Notes: [1]
23. (ii) a)
24. Criterion 6 Notes: [1]
25. Criterion 7 Notes: [1]
26. Criterion 8
27. Appendix Detergents Ingredients Database (DID) list
28. ANNEX II EU Ecolabel criteria for awarding the EU Ecolabel to animal care products
29. FRAMEWORK Aims of the criteria
30. a)
31. b) Table 1 Threshold levels applicable to substances for animal care products (% weight by weight, % w/w), shown by criterion. Abbreviations: CLP: Classification, Labelling and Packaging; CMR: carcinogenic, mutagenic, toxic for reproduction; N/A: not applicable
32. EU ECOLABEL CRITERIA FOR ANIMAL CARE PRODUCTS
33. Criterion 1 Table 2 CDV limits
34. Criterion 2
35. Criterion 3
36. 3(a) (i) Table 4 Table 5 Restricted hazard classes, categories and associated hazard statement codes Derogations to restrictions on ingoing substances classified under Regulation (EC) No 1272/2008
37. 3(b) Notes: [1][2]
38. 3(b)
39. 3(d)
40. 3(e)
41. 3(f)
42. Criterion 4
43. (i)Note:
44. (ii)Notes: [1]
45. (ii) a)
46. Criterion 5 Notes: [1]
47. Criterion 6
48. Criterion 7

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 66/2010 of the European Parliament and of the Council of 25 November 2009 on the EU Ecolabel , and in particular Article 8(2) thereof,

After consulting the European Union Ecolabelling Board,

Whereas:

(1) Under Regulation (EC) No 66/2010, the EU Ecolabel may be awarded to those products with a reduced environmental impact during their entire life cycle.

(2) Regulation (EC) No 66/2010 provides that specific EU Ecolabel criteria are to be established according to product groups.

(3) Commission Decision 2014/893/EU established EU Ecolabel criteria and related assessment and verification requirements for the product group rinse-off cosmetics. The period of validity of those criteria and requirements has been extended to 31 December 2021 by Commission Decision (EU) 2018/1590.

(4) In order to better reflect best practice in the market for this product group and to take account of innovations introduced in the intervening period, it is appropriate to establish a new set of criteria for rinse-off cosmetics.

(5) The EU Ecolabel Fitness check Report of 30 June 2017, reviewing the implementation of Regulation (EC) No 66/2010, concluded on the need to develop a more strategic approach for the EU Ecolabel, also including the bundling of closely related product groups where appropriate.

(6) In line with those conclusions, it is appropriate to revise the criteria for the product group rinse-off cosmetics, including the expansion of its scope to other cosmetic products covered by Commission Regulation (EC) No 1223/2009 and to animal care products. In order to reflect that expansion of its scope it is also appropriate to modify the product group name to Cosmetic products and animal care products subsuming cosmetic products manufactured for human and animal use.

(7) The New Circular Economy Action Plan for a cleaner and more competitive Europe adopted on 11 March 2020 stipulates that the durability, recyclability and recycled content requirements will be more systematically included in the EU Ecolabel criteria.

(8) The revised EU Ecolabel criteria for cosmetic products and animal care products should aim, in particular, at promoting products that have limited impacts in terms of eco-toxicity and biodegradability, which may only contain a limited amount of hazardous substances and that use less packaging, which can be easily recycled. The use of recycled material and refillable packaging should be promoted. In the revision, appropriate attention should be paid to the coherence between relevant EU policies, legislation and scientific evidence.

(9) The new criteria and related assessment and verification requirements for the product group should remain valid until 31 December 2027, taking into account the innovation cycle for that product group.

(10) For reasons of legal certainty, Decision 2014/893/EU should be repealed.

(11) A transitional period should be allowed for producers whose products have been awarded the EU Ecolabel for rinse-off cosmetics on the basis of the criteria set out in Decision 2014/893/EU, so that they have sufficient time to adapt their products to comply with the new criteria and requirements. For a limited period after adoption of this Decision, producers should also be allowed to submit applications based either on the criteria established by Decision 2014/893/EU or on the new criteria stablished by this Decision. EU Ecolabel licences awarded in accordance with the criteria set out in Decision 2014/893/EU should be allowed to be used for twelve months from the date of adoption of this Decision.

(12) The measures provided for in this Decision are in accordance with the opinion of the Committee established by Article 16 of Regulation (EC) No 66/2010,

HAS ADOPTED THIS DECISION:

Article 1

The product group cosmetic products shall comprise any substance or mixture falling under the scope of Regulation (EC) No 1223/2009, intended to be placed in contact with the external parts of the human body, or with the teeth and the mucous membranes of the oral cavity, with a view exclusively or mainly to cleaning them, perfuming them, changing their appearance, protecting them, keeping them in good condition or correcting body odours. The product group Cosmetic products shall include rinse-off and leave-on products for both private and professional use.

Article 2

The product group animal care products shall comprise any substance or mixture intended to be placed in contact with animal hair to clean them or to improve the condition of it, such as shampoos and conditioners for animals. Animal care products shall not cover products that are specifically marketed for disinfecting or anti-bacterial use. The product group Animal care products shall include rinse-off products for both private and professional use.

Article 3

For the purpose of this Decision, the following definitions shall apply:

(1) leave on products means products marketed as not intended to be removed with water after use in normal conditions;

(2) rinse off products means products marketed as intended to be removed with water after use in normal conditions.

Article 4

In order for a product to be awarded the EU Ecolabel under Regulation (EC) No 66/2010 for the product group cosmetic products and animal care products, it shall fall within the definition of that product group as specified in Articles 1 and 2 of this Decision and shall comply with the criteria and related assessment and verification requirements set out in Annex I to this Decision, for cosmetic products, or in Annex II for animal care products.

Article 5

The EU Ecolabel criteria for the product group cosmetic products and animal care products and the related assessment and verification requirements shall be valid until 31 December 2027.

Article 6

For administrative purposes, the code number assigned to the product group cosmetic products shall be 030. For administrative purposes, the code number assigned to the product group animal care products shall be 054.

Article 7

Decision 2014/893/EU is repealed.

Article 8

1. Notwithstanding Article 7, applications submitted before the date of adoption of this Decision for the EU Ecolabel for the product group rinse-off cosmetics, as defined in Decision 2014/893/EU shall be evaluated in accordance with the conditions laid down in that Decision.

2. Applications for the EU Ecolabel for products falling within the product group rinse-off cosmetics submitted on or within two months from the date of adoption of this Decision may be based either on the criteria set out in this Decision, or on the criteria set out in Decision 2014/893/EU. Those applications shall be evaluated in accordance with the criteria on which they are based.

3. EU Ecolabel licenses awarded on the basis of an application evaluated in accordance with the criteria set out in Decision 2014/893/EU may be used for twelve months from the date of adoption of this Decision.

Article 9

This Decision is addressed to the Member States.

Done at Brussels, 22 October 2021. For the Commission Virginijus Sinkevičius Member of the Commission

ANNEX

ANNEX I EU Ecolabel criteria for awarding the EU Ecolabel to cosmetic products

FRAMEWORK Aims of the criteria

The EU Ecolabel criteria target the best cosmetic products on the market, in terms of environmental performance. The criteria focus on the main environmental impacts associated with the life cycle of these products and promote circular economy aspects. In particular, the criteria aim to promote products that have limited impacts in terms of eco-toxicity and biodegradability, which may only contain a limited amount of hazardous substances and that use less packaging, which can be easily recycled. The use of recycled material and refillable packaging is promoted. To this end, the criteria: The criteria for awarding the EU Ecolabel to cosmetic products are the following:

(1) set requirements to limit the overall aquatic toxicity;

(2) set requirements to ensure that the ingredients are biodegradable and will not persist in water;

(3) recognise and reward products with restricted use of hazardous substances;

(4) set requirements to allow the maximum usage of the product contained in a container, promote the minimisation of use of packaging material and promote plastics recyclability;

(5) recognise and reward products containing renewable ingredients from sustainable origin;

(6) guarantee that the product meets certain quality requirements and user satisfaction;

(7) set a requirement to inform consumers on the environmental benefits associated with the product, in order to encourage its purchase.

(1) toxicity to aquatic organisms: Critical Dilution Volume (CDV) of rinse-off products;

(2) biodegradability of rinse-off products;

(3) aquatic toxicity and biodegradability of leave-on products;

(4) excluded and restricted substances;

(5) packaging;

(6) sustainable sourcing of palm oil, palm kernel oil and their derivatives;

(7) fitness for use;

(8) information on EU Ecolabel.

Assessment and verification

a)Note:

Requirements Specific assessment and verification requirements are indicated within each criterion. Where the applicant is required to provide declarations, documentation, analyses, test reports, or other evidence to show compliance with the criteria, these may originate from the applicant and/or his/her supplier(s) and/or their supplier(s), etc. as appropriate. Competent bodies shall preferentially recognise attestations which are issued by bodies accredited in accordance with the relevant harmonised standard for testing and calibration laboratories and verifications by bodies that are accredited in accordance with the relevant harmonised standard for bodies certifying products, processes and services. Where appropriate, test methods other than those indicated for each criterion may be used if the competent body assessing the application accepts their equivalence. Where appropriate, competent bodies may require supporting documentation and may carry out independent verifications or site inspections to check compliance with these criteria. Changes in suppliers and production sites pertaining to products to which the EU Ecolabel has been granted shall be notified to competent bodies, together with supporting information to enable verification of continued compliance with the criteria. As a prerequisite the product shall meet all applicable legal requirements of the country or countries in which the product is placed on the market. The applicant shall declare the product's compliance with this requirement. The Appendix makes reference to the Detergent Ingredient Database list (DID list) which contains the most widely used ingredients in detergents and cosmetics formulations. It shall be used for deriving the data for the calculations of the Critical Dilution Volume (CDV) (criterion 1), for the assessment of the biodegradability (criterion 2) of the ingoing substances and for the assessment of the biodegradability and aquatic toxicity of leave-on products (criterion 3). For substances not included in the DID list, guidance is given on how to calculate or extrapolate the relevant data. The latest version of the DID list is available from the EU Ecolabel website or via the websites of the individual competent bodies. A list of all ingoing substances in the final product shall be provided to the competent body, indicating the trade name (if existing), the chemical name, the CAS No, International Nomenclature of Cosmetic Ingredients (INCI) designations, DID No (if existing), its function, form and concentration in mass percentage (including and excluding water), regardless of concentration in the final product formulation. All listed substances present in the form of nanomaterials shall be clearly indicated on the list with the word nano written in brackets. For each substance listed, the Safety Data Sheets (SDS) in accordance with Regulation (EC) No 1907/2006 of the European Parliament and of the Council shall be provided. Where an SDS is not available for a single substance because it is part of a mixture, the applicant shall provide the SDS of the mixture. A written confirmation from the applicant that all the criteria are fulfilled shall also be required for the assessment. Label, claims and/or instructions information accompanying the product shall be used to categorise the cosmetic product. Where a cosmetic product is marketed for different cosmetic uses, the cosmetic product category for which stricter criteria applies shall be assigned to the product.

b) Table 1 Threshold levels applicable to substances for cosmetic products (% weight by weight, %w/w), shown by criterion. Abbreviations: CLP: Classification, Labelling and Packaging; CMR: carcinogenic, mutagenic, toxic for reproduction; N/A: not applicable

Measurement thresholds Compliance with the ecological criteria is required for all substances as specified in Table 1. Criterion name Preservatives Colourants Fragrances Impurities Other substances (e.g. surfactants, enzymes, UV filters) Criterion 1. Toxicity to aquatic organisms: Critical Dilution Volume (CDV) of rinse-off cosmetic products no limit no limit no limit ≥ 0,0100 no limit Criterion 2. Biodegradability of rinse-off cosmetic products no limit no limit no limit ≥ 0,0100 no limit Criterion 3. Biodegradability and aquatic toxicity of leave-on cosmetic products no limit no limit no limit ≥ 0,0010 no limit Criterion 4. Excluded and restricted substances Criterion 4 (a) (i): Restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 of the European Parliament and of the Council (rinse-off) ≥ 0,0100 ≥ 0,0100 ≥ 0,0100 ≥ 0,0100 ≥ 0,0100 Criterion 4 (a) (i): Restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 (leave-on) ≥ 0,0010 ≥ 0,0010 ≥ 0,0010 ≥ 0,0010 ≥ 0,0010 Criterion 4 (a) (ii): Restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 (carcinogenic, mutagenic, toxic for reproduction) (rinse-off and leave-on) no limit no limit no limit no limit no limit Criterion 4 (a) (iii): product classification (rinse-off and leave-on) no limit no limit no limit no limit no limit Criterion 4 (b): Specified excluded substances (rinse-off and leave-on) no limit no limit no limit no limit no limit Criterion 4 (c): Restrictions on Substances of Very High Concern (rinse-off and leave-on) no limit no limit no limit no limit no limit Criterion 4 (d): Fragrances (rinse-off) N/A N/A no limit ≥ 0,0100 N/A Criterion 4 (d): Fragrances (leave-on) N/A N/A no limit ≥ 0,0010 N/A Criterion 4 (e): Preservatives (rinse-off) no limit N/A N/A ≥ 0,0100 N/A Criterion 4 (e): Preservatives (leave-on) no limit N/A N/A ≥ 0,0010 N/A Criterion 4 (f): Colourants (rinse-off) N/A no limit N/A ≥ 0,0100 N/A Criterion 4 (f): Colourants (leave-on) N/A no limit N/A ≥ 0,0010 N/A Criterion 4 (g): UV filters (leave-on) N/A N/A N/A ≥ 0,0010 no limit Criterion 6. Sustainable sourcing of palm oil, palm kernel oil and their derivatives Criterion 6: Sustainable sourcing of palm oil, palm kernel oil and their derivatives (rinse-off) no limit no limit no limit ≥ 0,0100 no limit Criterion 6 (a): Sustainable sourcing of palm oil, palm kernel oil and their derivatives (leave-on) no limit no limit no limit ≥ 0,0010 no limit For the purpose of this Annex, the following definitions shall apply:

1) active content (AC) means the sum of organic ingoing substances in the product excluding the water content of the ingredients (expressed in grams), calculated on the basis of the complete formulation of the final product. Inorganic rubbing/abrasive agents are not included in the calculation of the active content;

2) children products means products marketed to be used up to the age of 12 years and products marketed as family product;

3) ingoing substances means all substances in the cosmetic product, including additives (e.g. preservatives and stabilisers) in the raw materials. Substances known to be released from ingoing substances (e.g. formaldehyde from preservatives and arylamine from azodyes and azopigments) shall also be regarded as ingoing substances. Residuals, pollutants, contaminants, by-products, etc. from production, incl. production of raw materials, that remain in the raw materials ≥ 1000 ppm (≥ 0,1000 %w/w ≥ 1000 mg/kg) are always regarded as ingoing substances, regardless of the concentration in the final product;

4) impurities means residuals, pollutants, contaminants, by-products, etc. from production, incl. production of raw materials that remain in the raw material/ingredient and/or in the in the final product in concentrations less than 100 ppm (0,0100 % w/w, 100 mg/kg) in the rinse-off product and less than 10 ppm (0,0010 % w/w, 10,0 mg/kg) in the leave-on product;

5) microplastics means particles with a size of below 5 mm of insoluble macromolecular plastic, obtained through one of the following processes: a) a polymerisation process such as polyaddition or polycondensation or a similar process using monomers or other starting substances; b) chemical modification of natural or synthetic macromolecules; c) microbial fermentation;

6) primary packaging means packaging in direct contact with the content conceived so as to constitute the smallest sales unit of distribution to the final user or consumer at the point of purchase;

7) nanomaterial means an insoluble or biopersistant and intentionally manufactured material with one or more external dimensions, or an internal structure, on the scale from 1 to 100 nm, in accordance with Regulation (EC) No 1223/2009;

8) secondary packaging means packaging which can be removed from the product without affecting its characteristics and is conceived so as to constitute at the point of purchase a grouping of a certain number of sales units whether the latter is sold as such to the final user or consumer or whether it serves only as a means to replenish the shelves at the point of sale.

9) substances identified to have endocrine disrupting properties means substances which have been identified to have endocrine disrupting properties (human health and/or environment) according to Article 57(f) of Regulation (EC) No 1907/2006 of the European Parliament and of the Council (candidate list of substances of very high concern for authorisation), or according to Regulations (EU) No 528/2012 or (EC) No 1107/2009 of the European Parliament and of the Council.

EU ECOLABEL CRITERIA FOR COSMETIC PRODUCTS

Criterion 1 Table 2 CDV limits

Toxicity to aquatic organisms: Critical Dilution Volume (CDV) of rinse-off products The total CDV toxicity of the rinse-off product, as specified in Table 2, shall not exceed the following limits: Product CDV (l/g AC) Shampoos, soaps, shower preparations, shaving soaps and toothpaste (solid form) 2200 Liquid soaps and shower preparations 10000 Shampoos (liquid form) 11000 Feminine hygiene cosmetic products 12000 Hair conditioners 12000 Rinse-off hair styling and treatment products (hair dyes) 12000 Rinse-off skin care products (exfoliants) 12000 Shaving foams, shaving gels, shaving creams 12000 Toothpaste and mouthwash 12000 Other rinse-off products 12000 The CDV shall be calculated using the following equation: CDV = ∑ CDV (ingoing substance i) = ∑ weight (i) x DF (i) x 1000/TF chronic (i) Where: weight (i) is the weight of the ingoing substance (in grams) per 1 gram of AC (i.e. normalised weight contribution of the ingoing substance to the AC) DF (i) is the degradation factor of the ingoing added substance TF chronic (i) is the toxicity factor of the ingoing added substance (in milligrams/litre) Assessment and verification: the applicant shall provide the calculation of the CDV of the product. A spreadsheet for calculation of the CDV value is available on the EU Ecolabel website. The values of DF and TF chronic shall be as given in the DID list-part A. If the ingoing substance is not included in the DID list-part A, the applicant shall determine the values using the guidelines described in the DID list-part B and attaching the associated documentation (for more information see the Appendix).

Criterion 2

Biodegradability of rinse-off products

a)

Biodegradability of surfactants All surfactants shall be readily biodegradable under aerobic conditions and biodegradable under anaerobic conditions. The following shall be exempt from the requirement on anaerobic biodegradability: Surfactants with cleaning and/or foaming function in toothpastes.

b) Table 3 aNBO and anNBO limits

Biodegradability of organic ingoing substances The content of all organic ingoing substances in the product that are aerobically non-biodegradable (not readily biodegradable) (aNBO) or anaerobically non-biodegradable (anNBO) shall not exceed the limits in Table 3: Product aNBO (mg/g AC) anNBO (mg/g AC) Shampoos, soaps, shower preparations, and toothpaste (solid form) 5 5 Shaving solid soaps 10 10 Feminine hygiene cosmetic products 15 15 Hair conditioners 15 15 Liquid soaps and shower preparations 15 15 Rinse-off hair styling and treatment products (hair dyes) 15 15 Rinse-off skin care products (exfoliants) 15 15 Shampoo (liquid form) 20 20 Toothpastes, mouthwashes 15 15 Shaving foams, shaving gels, shaving creams 70 40 Other rinse-off products 15 15 Assessment and verification: the applicant shall provide documentation for the biodegradability of surfactants, as well as the calculation of aNBO and anNBO for the product. A spreadsheet for calculating aNBO and anNBO values is available on the EU Ecolabel website. For surfactant biodegradability values as well for aNBO and anNBO values for organic ingoing substances, reference shall be made to the DID list. For ingoing substances which are not included in the DID list, the relevant information from literature or other sources, or appropriate test results, together with a toxicologist declaration showing that they are aerobically and anaerobically biodegradable shall be provided as described in the Appendix. In the absence of documentation in accordance with the above requirements, an ingoing substance other than a surfactant may be exempted from the requirement for anaerobic biodegradability if one of the following three conditions is fulfilled: Testing for adsorption/desorption may be conducted in accordance with Guidelines 106 of the Organisation for Economic Co-operation and Development (OECD).

1. the substance is readily degradable and has low adsorption (A < 25 %);

2. the substance is readily degradable and has high desorption (D > 75 %);

3. the substance is readily degradable and non-bioaccumulating.

Criterion 3

Aquatic toxicity and biodegradability of leave-on products At least 95 % by weight of the total content of organic ingoing substances shall be: UV filters in leave-on products with sun protection function shall be exempt from that requirement. Assessment and verification: the applicant shall provide documentation for the biodegradability and aquatic toxicity values. For ingoing substances which are not included in the DID list, the relevant information from literature or other sources, or appropriate test results, showing biodegradability/toxicity/potential for bioaccumulation/bioavailability specifications shall be provided as described in the Appendix.

readily biodegradable (OECD 301 A-F), and/or

lowest aquatic toxicity NOEC/ECx > 0,1 mg/l or EC/LC50 > 10,0 mg/l and not be bioaccumulable, and/or

lowest aquatic toxicity NOEC/ECx > 0,1 mg/l or EC/LC50 > 10,0 mg/l and be potentially biodegradable (OECD 302 A-C) and/or

lowest aquatic toxicity NOEC/ECx > 0,1 mg/l or EC/LC50 > 10,0 mg/l and not be bioavailable (molecular weight > 700 g/mol)

Criterion 4

Excluded and restricted substances

4 (a) Table 4 Table 5 Restricted hazard classes, categories and associated hazard statement codes Derogations to restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 and applicable conditions

Restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 Where stricter, the generic or specific concentration limits determined in accordance with Article 10 of Regulation (EC) No 1272/2008 shall prevail. Acute toxicity Categories 1 and 2 Category 3 H300 Fatal if swallowed H301 Toxic if swallowed H310 Fatal in contact with skin H311 Toxic in contact with skin H330 Fatal if inhaled H331 Toxic if inhaled H304 May be fatal if swallowed and enters airways EUH070 Toxic by eye contact Specific target on organ toxicity Category 1 Category 2 H370 Causes damage to organs H371 May cause damage to organs H372 Causes damage to organs through prolonged or repeated exposure H373 May cause damage to organs through prolonged or repeated exposure Respiratory and skin sensitisation Category 1A Category 1B H317 May cause allergic skin reaction H317 May cause allergic skin reaction H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled Hazardous to the aquatic environment Categories 1 and 2 Category 3 and 4 H400 Very toxic to aquatic life H412 Harmful to aquatic life with long-lasting effects H410 Very toxic to aquatic life with long-lasting effects H413 May cause long-lasting effects to aquatic life H411 Toxic to aquatic life with long-lasting effects Hazardous to the ozone layer H420 Harms public health and the environment by destroying ozone in the upper atmosphere Substance type Applicability Derogated hazard class, category and hazard statement code Derogation conditions Surfactants Rinse-off and leave-on products H412: Harmful to aquatic life with long-lasting effects Total concentration < 20 % w/w in the final product Sodium Fluoride Rinse-off oral care products H301: Toxic if swallowed Only in oral care products (mouthwash and toothpaste) Criterion 4 (a) shall not apply to substances covered by Article 2(7)(a) and (b) of Regulation (EC) No 1907/2006 which sets out criteria for exempting substances within Annexes IV and V to that Regulation from the registration, downstream user and evaluation requirements. In order to determine whether that exclusion applies, the applicant shall screen any substance and mixture in the final product.

(i) Unless derogated in Table 5, the product shall not contain substances at or above the concentration of 0,0100 % weight by weight for rinse-off products and 0,0010 % weight by weight for leave-on cosmetics that meet the criteria for classification with the hazard classes, categories and associated hazard statement codes listed in Table 4, in accordance with Regulation (EC) No 1272/2008.

Table 4 Table 5 Restricted hazard classes, categories and associated hazard statement codes Derogations to restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 and applicable conditions

(ii) Table 6 Table 7 Excluded hazard classes, categories and associated hazard statement codes Derogations to restrictions on substances classified as CMR under Regulation (EC) No 1272/2008 and applicable conditions

Unless derogated in Table 7, substances that meet the criteria for classification with the hazard statements listed in Table 6 shall not be contained in the final product nor in its ingredients, regardless of their concentration. Carcinogenic, mutagenic or toxic for reproduction Categories 1A and 1B Category 2 H340 May cause genetic defects H341 Suspected of causing genetic defects H350 May cause cancer H351 Suspected of causing cancer H350i May cause cancer by inhalation H360F May damage fertility H361f Suspected of damaging fertility H360D May damage the unborn child H361d Suspected of damaging the unborn child H360FD May damage fertility. May damage the unborn child H361fd Suspected of damaging fertility. Suspected of damaging the unborn child H360Fd May damage fertility. Suspected of damaging the unborn child H362 May cause harm to breast fed children H360Df May damage the unborn child. Suspected of damaging fertility Substance type Applicability Derogated hazard class, category and hazard statement code Derogation conditions Titanium dioxide (nano-form) UV filters in leave-on products with sun protection function H351: Suspected of causing cancer Must comply with SCCS/1516/13, SCCS/1580/16, and SCCS/1583/17. It cannot be used in powder or spray form

(iii) Ingoing substances classified as environmentally hazardous according to Regulation (EC) No 1272/2008 may be included in the product to a maximum: 100·c [H410] +10·c [H411] +c [H412] ≤ 2,5 % where c is the fraction of the product, measured in percentage by weight, made up of the classified substance. The following exemptions apply:

Compounds of zinc (classified H410) may however be included in zinc ointment/cream marketed to heal irritated skin to a maximum of 25 % and may, in these cases, be exempted from the calculation.

Surfactants classified as H412 shall be exempted from the requirement.

4 (b) Notes: [1][2][3][4]

Specified excluded substances The following substances shall not be included in the product, regardless of the concentration, neither as part of the formulation, as part of any mixture included in the formulation, nor as impurities: Substance name = Alkyl phenol, under: https://echa.europa.eu/es/advanced-search-for-chemicals BHT may still be used in perfumes provided that total BHT content in the perfume is below 100 ppm and total BHT concentration in the final product is below 0,0010 % w/w. non-readily biodegradable phosphonate may still be used in solid rinse-off products up to a total concentration of 0,0600 % w/w. These substances may be allowed if present as impurities, but up to a total concentration of 500 ppm in the product formulation.

(i) Alkyl phenol ethoxylates (APEOs) and other alkyl phenol derivatives [1];

(ii) Butylated Hydroxytoluene (BHT) [2] and Butylated hydroxyanisole (BHA);

(iii) Cocamide DEA;

(iv) Deltamethrin;

(v) Diethylenetriaminepentaacetic acid (DTPA) and its salts;

(vi) Ethylenediaminetetraacetic acid (EDTA) and its salts and non-readily biodegradable phosphonates [3];

(vii) Microplastics and microbeads;

(viii) Mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) in lip care products, where the recommendations by Cosmetic Europe for mineral oils are not complied;

(ix) Nanomaterials, unless used according to the conditions laid down for specific nanomaterials in Annexes III, IV and VI to Regulation (EC) No 1223/2009 ;

(x) Nitromusks and polycyclic musks;

(xi) Perfluorinated and polyfluorinated substances;

(xii) Phthalates;

(xiii) Resorcinol;

(xiv) Sodium hypochlorite, chloramine and sodium chlorite;

(xv) Sodium Lauryl Sulphate (SLS) in toothpaste products;

(xvi) Sodium phosphate, dihydrate; Disodium phosphate, heptahydrate; Trisodium orthophosphate; and Phosphoric acid, trisodium salt, dodecahydrate [4];

(xvii) Substances identified to have endocrine disrupting properties;

(xviii) The following fragrances: benzyl salicylate, butylphenyl metylpropional, tetramethyl acetyloctahydranophthalenes (OTNE);

(xix) The following isoflavones: daidzein, genistein;

(xx) The following preservatives: benzalkonium chloride, formaldehyde releasers, isothiazolinones, kojic acid, parabens, triclocarban, triclosan;

(xxi) The following UV filters: benzophenone, benzophenone-1, benzophenone-2, benzophenone-3, benzophenone-4, benzophenone-5, ethylhexyl methoxycinnamate, homosalate, octocrylene;

(xxii) Triphenyl phosphate.

4 (c) Restrictions on Substances of Very High Concern (SVHCs) Substances meeting the criteria referred to in Article 57 of Regulation (EC) No 1907/2006 that have been identified according to the procedure described in Article 59 of that Regulation and included in the candidate list of substances of very high concern for authorisation shall not be present the product, regardless of their concentration.

4 (d) Fragrances

4 (d)

(i) Children products shall be fragrance-free. Criterion 4 (d) (i) shall not apply to toothpaste marketed for children.

(ii) Products marketed as mild/sensitive shall be fragrance-free.

(iii) Substances listed under Table 13-1 of the SCCS opinion on Fragrance allergens in cosmetic products shall not be present in EU Ecolabel products in concentrations higher than 0,0100 % in rinse-off products and 0,0010 % in leave-on products.

(iv) Any substance or mixture added to the product as a fragrance shall be manufactured and handled following the code of practice of the International Fragrance Association (IFRA). The code can be found on the IFRA website: http://www.ifrafragrance.org/. The manufacturer shall follow the recommendations of the IFRA Standards concerning prohibition, restricted use and specified purity criteria for materials.

4 (e) Preservatives

4 (e)

(i) Preservatives classified as H317 or H334 shall be prohibited regardless of the concentration.

(ii) Preservatives in the product shall not release or degrade to substances that are classified in accordance with the requirements of criterion 4 (a).

(iii) The product may contain preservatives provided that they are not bioaccumulating. A preservative is not considered bioaccumulating if BCF < 500 or log Kow < 4,0. If both BCF and log Kow values are available, the highest measured value shall be used.

(iv) Preservatives used in products in contact with the mouth (e.g. toothpaste, mouthwash, lip care products, nail polish) shall have been approved as food additives in accordance with Regulation (EC) No 1333/2008 of the European Parliament and of the Council.

4 (f) Colourants

4 (f)

(i) Colourants classified as H317 or H334 shall be prohibited regardless of the concentration.

(ii) Colourants in the product shall not be bioaccumulating. A colourant is considered not bioaccumulating if BCF < 500 or log Kow < 4,0. If both BCF and log Kow values are available, the highest measured value shall be used. In the case of colouring agents approved for use in food, it is not necessary to submit documentation of bioaccumulation potential.

(iii) Colourants used in products in contact with the mouth (e.g. toothpaste, mouthwash, lip care products, nail polish) shall have been approved as food additives in accordance with Regulation (EC) No 1333/2008.

(iv) The content of barium, bismuth, cadmium, cobalt, hexavalent chromium (Chromium VI), lead and nickel occurring as impurity in decorative cosmetics and hair dyes shall be restricted to concentrations below 10 ppm. The content of mercury occurring as impurity in decorative cosmetics and hair dyes shall be restricted to concentrations below 1 ppm.

4 (g) UV filters UV filters may only be added to leave-on products that target the solar protection of the user, e.g. sunscreens and multi-purpose products with a sunscreen function. UV filters shall only protect the user – not the product. All UV filters contained in the product shall not be bioaccumulating (BCF<500 / log Kow<4,0) or shall have a lowest measured toxicity of NOEC/ECx > 0,1 mg/l or EC/LC50 > 10,0 mg/l. Assessment and verification: The applicant shall provide a signed declaration of compliance with all above sub-criteria, supported by declarations from suppliers, for criteria 4 (a) (ii), 4 (e), 4 (f) and 4 (g); and the following supporting evidence: To demonstrate compliance with sub-criteria 4 (a), 4 (b) and 4 (c), the applicant shall provide: For substances exempted from sub-criterion 4 (a) (see Annexes IV and V to Regulation (EC) No 1907/2006), a declaration to this effect by the applicant shall suffice to demonstrate compliance. For mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) in sub-criterion 4 (b), compliance with the recommendations7 by Cosmetic Europe for mineral oils shall be demonstrated. For sub-criterion 4 (c), reference to the latest list of substances of very high concern shall be made on the date of application. To demonstrate compliance with sub-criterion 4 (d), the applicant shall provide a signed declaration of compliance, supported by a declaration of the fragrance manufacturer, as appropriate. To demonstrate compliance with sub-criterion 4 (e), the applicant shall provide: copies of the SDS of any preservative added, and information on its BCF and/or log Kow values. To demonstrate compliance with sub-criterion 4 (f), the applicant shall provide: copies of the SDS of any colourant added together with information on its BCF and/or log Kow value, or documentation to ensure that the colouring agent is approved for use in food. To demonstrate compliance with sub-criterion 4 (g), the applicant shall provide: copies of the SDS of any UV filters together with information on its BCF and/or log Kow value, or lowest available NOEC/ECx/EC/LC50 value. In addition, a declaration that, if used, nano TiO2 fulfils the conditions laid down in Annex VI to Regulation (EC) No 1223/2009 shall be provided. The above evidence may also be provided directly to competent bodies by any supplier in the applicant's product supply chain.

4 (g)

(i) SDS of any substance/mixture and their concentration in the final product;

(ii) a written confirmation that sub-criteria 4 (a), 4 (b) and 4 (c) are fulfilled.

Criterion 5

Packaging The minimum volume for a rinse-off product to be certified other than toothpaste shall be 150 ml.

a)

Primary packaging Primary packaging shall be in direct contact with the contents. No additional packaging for the product as it is sold, e.g. cardboard over a bottle, shall be allowed, with the exception of secondary packaging which groups the product and its refill and products that include several elements for their use. For the rinse-off products for domestic use sold with pump that can be opened without compromising the design, a refilling option shall be provided in the same or higher primary packaging capacity. Note: Cardboard boxes used to transport the products to the retail stores shall not be considered as secondary packaging. Assessment and verification: the applicant shall provide a signed declaration and relevant evidence (e.g. pictures of the products as marketed).

(b)Note:[1] Packaging Impact Ratio (PIR) The Packaging Impact Ratio (PIR) shall be less than 0,20 g of packaging per gram of product for each of the packaging in which the product is sold. Products packed in metal aerosol containers shall be exempted from this requirement. PIR shall be calculated (separately for each of the packaging) as follows: PIR = (W + (Wrefill × F) + N + (Nrefill × F))/(D + (Drefill × F)) Where: W weight of packaging (primary + proportion of secondary [1], including labels) (g) Wrefill weight of refill packaging (primary + proportion of secondary [1], including labels) (g) N weight of non-renewable + non-recycled packaging (primary + proportion of secondary (1), including labels) (g) Nrefill weight of non-renewable and non-recycled refill packaging (primary + proportion of secondary (1), including labels) (g) D weight of product contained in the parent pack (g) Drefill weight of product delivered by the refill (g) F number of refills required to meet the total refillable quantity, calculated as follows: F = V × R/Vrefill Where: V volume capacity of the parent pack (ml) Vrefill volume capacity of the refill pack (ml) R the refillable quantity. This is the number of times that the parent pack can be refilled. Where F is not a whole number, it shall be rounded up to the next whole number. In case no refill is offered PIR shall be calculated as follows: PIR = (W + N)/D The manufacturer shall provide the number of foreseen refillings, or use the default values of R = 5 for plastics and R = 2 for cardboard. Primary packaging made of more than 80 % of recycled materials shall be exempted from this requirement. For decorative cosmetics the following shall apply: PIR= Σ(Wpackaging,i + Wnot-recycled,i) / 2* Wproduct, total ≤ 0,80 Where: Wpackaging, i the weight of the packaging component i Wnon-recycled, i the weight of non-recycled material in packaging component i (if it is not recycled material in the packaging is Wnon-recycled = Wpackaging) Wproduct, total the weight of the end product (packaging plus content) Proportional weight of the grouping packaging (e.g. 50 % of the total grouping packaging weight, if two products are sold together). Assessment and verification: the applicant shall provide the calculation of the PIR of the product. A spreadsheet for this calculation is available on the EU Ecolabel website. If the product is sold in different packaging (i.e. with different volumes), the calculation shall be submitted for each packaging size for which the EU Ecolabel shall be awarded. The applicant shall provide a signed declaration from the packaging manufacturer for the content of post-consumer recycled material or material from renewable origin in the packaging and a description of the refill system offered, if applicable (kinds of refills, volume). For approval of refill packaging, the applicant or retailer shall demonstrate that the refills shall be available for purchase on the market. The applicant shall provide third party verification and traceability for postconsumer recycled content. Certificates of recyclers pursuant a certification scheme following standard EN15343 may be used to support verification. Certificates of product production for converters pursuant a certification scheme following a controlled blending model as described in the ISO 22095 may be used to support verification.

c)

Information and design of primary packaging

(i)Note:

Information on primary packaging Dosage and refills: Applicants shall indicate the correct dosage or the appropriate quantity to be used on the label of the primary packaging together with the following sentence: using the correct dosage of the product minimises impacts on the environment and saves money. In cases where the correct dosage cannot be defined for a specific product because it depends on consumer aspects (e.g. length of the hair), the following sentence shall be used instead: dose the product with care so as not to over-consume it unnecessarily If the product is refillable, the applicant shall complete the information with a reference to use refills in order to minimise impacts on the environment and save money. End of life information: Applicants shall include a sentence or a pictogram in relation to empty product disposal (e.g. when empty, the package/container should be disposed of in a dedicated container for recycling) Products whose dimensions do not allow a proper display of information due to lack of space or text legibility reasons shall be exempted from this requirement.

(ii)Notes: [1]

Design of primary packaging Rinse-off products: The primary packaging shall be designed: The residual amount for the specified leave-on products in the container (R), which must be below 10 %, shall be calculated according to the formula set out for rinse-off products. For liquid hand soap no pump or dispenser sold with the product may provide more than 2 g (or 3 ml) soap per full press. Assessment and verification: the applicant shall submit a description of the dosage device (e.g. schematic illustration, pictures…), the test report with results of measuring the residual quantity of a rinse-off cosmetic product in the packaging and a high resolution image of the product packaging that clearly shows the sentences indicated in sub-criterion 5 (c) (i) (if applicable). Applicant shall provide documented evidence of which case under sub-criterion 5 (c) (i) applies for their product(s). The test procedure for measuring the residual quantity is described in the user manual available on the EU Ecolabel website.

(ii) a)

to make correct dosage easy by using a pump[1] or ensuring that the opening at the top is not too wide. Refills are exempted from this requirement.

b)

to ensure that at least 95 % of the product can be easily removed from the container. The residual amount of the product in the container (R), which must be below 5 %, shall be calculated as follows: R = ((m2 – m3)/(m1 – m3)) × 100 (%) Where: m1 Primary packaging and product (g) m2 Primary packaging and product residue in normal conditions of use (g) m3 Primary packaging emptied and cleaned (g) Rinse-off products whose primary packaging can be manually opened and the residue product can be extracted with adding water shall be exempted from the requirement in b). Leave-on products:

a)

Leave-on conditioner bottles shall have an emptying level of 90 % or have a lid that can be removed without tools.

b)

Cream bottles shall have an emptying level of 90 % or have a lid that can be removed without tools.

(d) Table 8 Materials and components excluded from packaging elements

Design for recycling of plastic packaging Plastic packaging shall be designed to facilitate effective recycling by avoiding potential contaminants and incompatible materials that are known to impede separation or reprocessing or to reduce the quality of recyclate. The label or sleeve, closure and, where applicable, barrier coatings shall not comprise, either singularly or in combination the materials and components listed in Table 8. Toothpaste tubes, pumps and aerosol containers shall be exempted from this requirement. Packaging element Excluded material or component Label or sleeve Closure Barrier coatings Assessment and verification: the applicant shall submit a signed declaration of compliance specifying the material composition, supported by manufacturer documentation, of the packaging including the container, label or sleeve, adhesives, closure and barrier coating, together with a sample of primary packaging.

PS label or sleeve in combination with a PET, PP or HDPE packaging

PVC label or sleeve in combination with a PET, PP or HDPE packaging

PETG label or sleeve in combination with a PET packaging.

PET label or sleeve (except LDPET (< 1 g/cm3)) in combination with a PET packaging.

Any other plastic materials for sleeves/labels with a density > 1 g/cm3 used with a PET packaging

Any other plastic materials for sleeves/labels with a density < 1 g/cm3 used with a PP or HDPE packaging

Labels or sleeves that are metallised or are welded to a packaging body (in mould labelling).

PSL (pressure sensitive) label unless the adhesive is water releasable at washing conditions of the recycling process.

PET PSL label, unless the adhesive is water releasable at washing conditions of the recycling process and has no reactivation.

PS closure in combination a with a PET, PP or HDPE packaging

PVC closure in combination with a PET, PP or HDPE packaging

PETG closures and/or closure material with density of above 1 g/cm3 in combination with a PET packaging

Closures (or part of) made of metal, glass, EVA

Closures (or part of) made of silicone. Exempted are silicone closures with a density < 1 g/cm3 in combination with a PET packaging and silicone closures with a density > 1 g/cm3 in combination with PP or HDPE packaging

Metallic foils or seals which remain fixed to the bottle or its closure after the product has been opened

Polyamide, EVOH provided with tie layers made by a polymer different that the one used for the packaging body, functional polyolefins, metallised and light blocking barriers

Criterion 6 Notes: [1]

Sustainable sourcing of palm oil, palm kernel oil and their derivatives In the specific case of renewable ingredients from palm oil or palm kernel oil, or derived from palm oil or palm kernel oil, 100 % w/w of the renewable ingredients used shall meet the requirements for sustainable production of a certification scheme that is a multi-stakeholder organisation with a broad membership, including non-governmental organisations (NGOs), industry, financial institutions and government and that addresses environmental impacts on soil, biodiversity, organic carbon stocks and conservation of natural resources. Assessment and verification: To demonstrate compliance, evidence through third-party chain of custody certificating that the raw materials used in the product or in its manufacturing originate from sustainably managed plantations shall be provided. For palm oil and palm kernel oil, Roundtable for Sustainable Palm Oil (RSPO) certificates or certificates of any equivalent or stricter sustainable production scheme demonstrating compliance to any of the following models shall be accepted: For palm oil and palm kernel oil derivatives, RSPO certificates or certificates of any equivalent or stricter sustainable production scheme demonstrating compliance to any of the following models shall be accepted: identity preserved, segregated, and mass balance. For palm oil, palm kernel oil and their derivatives, a mass balance calculation and/or invoices/delivery notes from the raw material producer shall be provided, showing that the proportion of certified raw material corresponds to the amount of certified palm oil, palm kernel oil and/or their derivatives. Alternatively, a declaration from the producer of raw materials shall be provided, showing that all purchased palm oil, palm kernel oil and/or their derivatives are certified. Competent bodies shall annually check the validity of the certificates for each certified product/ingredient [1]. The verification can be done via RSPO website, where the status of the certificate is showed in real time: https://www.rspo.org/certification/search-for-supply-chain-certificate-holders

until 1st January 2025: identity preserved, segregated, and mass balance;

after 1st January 2025: identity preserved and segregated.

Criterion 7 Notes: [1]

Fitness for use The product's capacity to fulfil its primary function (e.g. cleaning, conditioning) and any secondary functions claimed (e.g. anti-dandruff, colour protection, mild/sensitive) shall be demonstrated either through laboratory test(s) or a consumer test. The tests shall follow the Guidelines for the Evaluation of the Efficacy of Cosmetic Products and the instructions given in the user manual available on the EU Ecolabel website. The tests shall be conducted on the dosage indicated by the applicant [1]. The tests shall be performed at least on the efficacy/performance of the product and its ease of application. If a recognised standardised laboratory test is available (for example Commission Recommendation 2006/647 for sunscreen products), this shall be used, and consumer tests shall not be considered equivalent. The tests shall lead to a conclusion which clearly states how the results of the test demonstrate each individual parameter/property tested. If national guidelines on fluorine content in toothpaste are available, these shall be followed. Fluorine-free toothpastes which have been evaluated as protective as fluorine-containing toothpastes by an independent party shall be exempted. Laboratory tests shall include at least the following parameters: In case laboratory tests are not available, consumer tests may be used. For consumer tests, the consumers shall be asked about the product’s efficiency/performance compared to an equivalent market-leading product. The questions to the consumers shall cover at least the following aspects: Consumer tests shall include a minimum of 20 consumers, and at least 80 % of them shall be at least as satisfied with the product as with an equivalent market-leading product. The dosage used should be the same as the one identified in criterion 5 (c) (i). In the case a correct dosage could not be specified in criterion 5 (c) (i), the applicant shall indicate the dosage used for carrying out the test, substantiating the choice. Assessment and verification: The applicant shall document the test protocol (laboratory test(s) or consumer test) that has been followed in order to test the product's efficacy. Applicants shall present results from this protocol that demonstrate that the product fulfils the primary and secondary functions claimed on the product label or packaging. Laboratory tests performed in compliance with Regulation (EC) No 1223/2009 and Commission Regulation (EU) No 655/2013 may be used to demonstrate that the product fulfils its primary function and any secondary claimed function. It is not necessary to perform new specific tests to demonstrate a function previously demonstrated.

how/why the test method was chosen and how it can be used to document the product’s performance/quality

the parameters and/or properties that were tested and why they were chosen

1) How well does the product perform in comparison with a market-leading product using the same dosage?

2) How easy is it to apply and rinse-off (for rinse-off products) the product to/from the hair and/or skin in comparison with a market-leading product?

Criterion 8

Information appearing on the EU Ecolabel for cosmetic products The optional label with box shall contain the following information: The applicant shall follow the instructions on how to properly use the EU Ecolabel logo provided in the EU Ecolabel Logo Guidelines: http://ec.europa.eu/environment/ecolabel/documents/logo_guidelines.pdf Assessment and verification: The applicant shall provide a declaration of compliance with this criterion, supported by a high resolution image of the product packaging that clearly shows the label, the registration/licence number and, where relevant, the statements that can be displayed together with the label.

Fulfils strict requirements on harmful substances;

Tested performance;

Less packaging waste.

Appendix Detergents Ingredients Database (DID) list

The DID list (Part A) is a list containing information on the aquatic toxicity and biodegradability of ingredients typically used in detergent formulations. The list includes information on the toxicity and biodegradability of a range of substances used in washing and cleaning products. The list is not comprehensive, but guidance is given in Part B of the DID list concerning the determination of the relevant calculation parameters for substances not present on the DID list (e.g. the Toxicity Factor (TF) and degradation factor (DF), which are used for the calculation of the critical dilution volume). The list is a generic source of information and substances present on the DID list are not automatically approved for use in EU Ecolabel products. Part A and Part B of the DID list can be found on the EU Ecolabel website at: https://ec.europa.eu/environment/ecolabel/documents/DID%20List%20PART%20A%202016%20FINAL.pdf https://ec.europa.eu/environment/ecolabel/documents/DID_List_PART_B_2016_FINAL.pdf For substances with no data regarding aquatic toxicity and biodegradability, structure analogies with similar substances may be used to assess the TF and DF. Such structure analogies shall be approved by the competent body granting the EU Ecolabel license. Alternatively, a worst case approach shall be applied, using the parameters below: Worst case approach: Acute toxicity Chronic toxicity Degradation Ingoing added substance LC50/ EC50 SF (acute) TF (acute) NOEC (1) SF (chronic) TF (chronic) DF Aerobic Anaerobic Name 1 mg/l 10000 0,0001 0,0001 1 P N

Documentation of ready biodegradability

The following test methods for ready biodegradability shall be used:

(1) Until 1 December 2015: The test methods for ready biodegradability provided for in Council Directive 67/548/EEC, in particular the methods detailed in Annex V.C4 to that Directive, or their equivalent OECD 301 A-F test methods, or their equivalent ISO tests. The 10-day window principle shall not apply for surfactants. The pass levels shall be 70 % for the tests referred to in Annex V.C4-A and C4-B to Directive 67/548/EEC (and their equivalent OECD 301 A and E tests and ISO equivalents), and shall be 60 % for tests C4-C, D, E and F (and their equivalent OECD 301 B, C, D and F tests and ISO equivalents). or The test methods provided for in Regulation (EC) No 1272/2008.

(2) After 1 December 2015: The test methods provided for in Regulation (EC) No 1272/2008

Documentation of anaerobic biodegradability

The reference test for anaerobic biodegradability shall be EN ISO 11734, ECETOC No 28 (June 1988), OECD 311 or an equivalent test method, with the requirement of 60 % ultimate biodegradability under anaerobic conditions. Test methods simulating the conditions in a relevant anaerobic environment may also be used to document that 60 % ultimate biodegradability has been attained under anaerobic conditions.

Extrapolation for substances not listed in the DID-list

Where the ingoing substances are not listed in the DID-list, the following approach may be used to provide the necessary documentation of anaerobic biodegradability:

(1) Apply reasonable extrapolation. Use test results obtained with one raw material to extrapolate the ultimate anaerobic biodegradability of structurally related surfactants. Where anaerobic biodegradability has been confirmed for a surfactant (or a group of homologues) according to the DID-list, it can be assumed that a similar type of surfactant is also anaerobically biodegradable (e.g. C12-15 A 1-3 EO sulphate [DID No 8] is anaerobically biodegradable, and a similar anaerobic biodegradability may also be assumed for C12-15 A 6 EO sulphate). Where anaerobic biodegradability has been confirmed for a surfactant by use of an appropriate test method, it can be assumed that a similar type of surfactant is also anaerobically biodegradable (e.g. literature data confirming the anaerobic biodegradability of surfactants belonging to the group alkyl ester ammonium salts may be used as documentation for a similar anaerobic biodegradability of other quaternary ammonium salts containing ester-linkages in the alkyl chain(s)). Nevertheless, vice-versa if a structurally similar surfactant has been shown not to be anaerobically degradable, it can be assumed that a similar type of surfactant is also not anaerobically biodegradable.

(2) Perform screening test for anaerobic biodegradability. If new testing is necessary, perform a screening test by use of EN ISO 11734, ECETOC No 28 (June 1988), OECD 311 or an equivalent method.

(3) Perform low-dosage biodegradability test. If new testing is necessary, and in the case of experimental problems in the screening test (e.g. inhibition due to toxicity of test substance), repeat testing by using a low dosage of surfactant and monitor degradation by 14C measurements or chemical analyses. Testing at low dosages may be performed by use of OECD 308 (August 2000) or an equivalent method.

Documentation of bioaccumulation

The following test methods for bioaccumulation shall be used:

(1) Until 1 March 2009: The reference test for bioaccumulation shall be OECD 107 or 117 or equivalent. The pass levels shall be < 500 or log Kow is < 4,0. The OECD 305 test on fish. For a BCF < 500 the substance is considered not bioaccumulative. If there is a measured BCF value, it is always the highest measured BCF that is used in assessing a substance’s bioaccumulative potential.

(2) After 1 March 2009: The reference test for bioaccumulation shall be OECD 107 or 117 or equivalent with the requirement of < 500 or log Kow is < 4,0

The lowest available NOEC/ECx/EC/LC50 value shall be used. If chronic values are available, they shall be used instead of acute ones.

For acute aquatic toxicity test methods Nos 201, 202 and 203 in the OECD Guideline for the Testing of Chemicals or equivalent test methods shall be used.

For chronic aquatic toxicity test methods Nos 210, 211, 215 and 229 in the OECD Guideline for the Testing of Chemicals or equivalent test methods shall be used. OECD 201 may be used as chronic test if chronic endpoints are chosen.

ANNEX II EU Ecolabel criteria for awarding the EU Ecolabel to animal care products

FRAMEWORK Aims of the criteria

The EU Ecolabel criteria target the best products on the market, in terms of environmental performance. The criteria focus on the main environmental impacts associated with the life cycle of these products and promote circular economy aspects. In particular, the criteria aim to promote products that have limited impacts in terms of eco-toxicity and biodegradability, which may only contain a limited amount of hazardous substances, which are not animal tested and that use less packaging, which can be easily recycled. The use of recycled material and refillable packaging is promoted. To this end, the criteria: The criteria for awarding the EU Ecolabel to animal care products are the following:

(1) set requirements to limit the overall aquatic toxicity;

(2) set requirements to ensure that the ingredients are biodegradable and will not persist in water;

(3) recognise and reward products with restricted use of hazardous substances;

(4) set requirements to allow the maximum usage of the product contained in a container and promotes the minimisation of use of packaging material and promote plastics recyclability;

(5) recognise and reward products with renewable ingredients from sustainable origin;

(6) guarantee that the product meets certain quality requirements;

(7) set a requirement to inform consumers on the environmental benefits associated with the product, in order to encourage its purchase;

(8) set a restriction on animal testing.

(1) toxicity to aquatic organisms: Critical Dilution Volume (CDV);

(2) biodegradability;

(3) excluded and restricted substances;

(4) packaging;

(5) sustainable sourcing of palm oil, palm kernel oil and their derivatives;

(6) fitness for use;

(7) information on EU Ecolabel.

Assessment and verification

a)

Requirements Specific assessment and verification requirements are indicated within each criterion. Where the applicant is required to provide declarations, documentation, analyses, test reports, or other evidence to show compliance with the criteria, these may originate from the applicant and/or his/her supplier(s) and/or their supplier(s), etc. as appropriate. Competent bodies shall preferentially recognise attestations which are issued by bodies accredited in accordance with the relevant harmonised standard for testing and calibration laboratories and verifications by bodies that are accredited in accordance with the relevant harmonised standard for bodies certifying products, processes and services. Where appropriate, test methods other than those indicated for each criterion may be used if the competent body assessing the application accepts their equivalence. Where appropriate, competent bodies may require supporting documentation and may carry out independent verifications or site inspections to check compliance with these criteria. Changes in suppliers and production sites pertaining to products to which the EU Ecolabel has been granted shall be notified to competent bodies, together with supporting information to enable verification of continued compliance with the criteria. As a prerequisite the product shall meet all applicable legal requirements of the country or countries in which the product is placed on the market. The applicant shall declare the product's compliance with this requirement. The Appendix makes reference to the Detergent Ingredient Database list (DID list) which contains the most widely used ingredients in detergents and cosmetics formulations. It shall be used for deriving the data for the calculations of the Critical Dilution Volume (CDV) (criterion 1) and for the assessment of the biodegradability (criterion 2) of the ingoing substances. For substances not included in the DID list, guidance is given on how to calculate or extrapolate the relevant data. The latest version of the DID list is available from the EU Ecolabel website or via the websites of the individual competent bodies. A list of all ingoing substances in the final product shall be provided to the competent body, indicating the trade name (if existing), the chemical name, the CAS No, International Nomenclature of Cosmetic Ingredients (INCI) designations, DID No (if existing), its function, form and concentration in mass percentage (including and excluding water), regardless of concentration in the final product formulation. All listed substances present in the form of nanomaterials shall be clearly indicated on the list with the word nano written in brackets. For each substance listed, the Safety Data Sheets (SDS) in accordance with Regulation (EC) No 1907/2006 of the European Parliament and of the Councilshall be provided. Where an SDS is not available for a single substance because it is part of a mixture, the applicant shall provide the SDS of the mixture. A written confirmation from the applicant that all the criteria are fulfilled shall also be required for the assessment. Note: Label, claims and/or instructions information accompanying the product shall be used to categorise the product. Where a product is marketed for different uses, the category for which stricter criteria apply shall be assigned to the product.

b) Table 1 Threshold levels applicable to substances for animal care products (% weight by weight, % w/w), shown by criterion. Abbreviations: CLP: Classification, Labelling and Packaging; CMR: carcinogenic, mutagenic, toxic for reproduction; N/A: not applicable

Measurement thresholds Compliance with the ecological criteria is required for all substances as specified in Table 1. Criterion name Preservatives Colorants Fragrances Impurities Other substances (e.g. surfactants, enzymes) Criterion 1. Toxicity to aquatic organisms: Critical Dilution Volume (CDV) no limit no limit no limit ≥ 0,0100 no limit Criterion 2. Biodegradability no limit no limit no limit ≥ 0,0100 no limit Criterion 3. Excluded and restricted substances Criterion 3 (a) (i): Restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 of the European Parliament and of the Council ≥ 0,0100 ≥ 0,0100 ≥ 0,0100 ≥ 0,0100 ≥ 0,0100 Criterion 3 (a) (ii) : Restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 (carcinogenic, mutagenic, toxic for reproduction) no limit no limit no limit no limit no limit Criterion 3 (a) (iii): product classification no limit no limit no limit no limit no limit Criterion 3 (b): Specified excluded substances no limit no limit no limit no limit no limit Criterion 3 (c): Restrictions on Substances of Very High Concern no limit no limit no limit no limit no limit Criterion 3 (d): Fragrances N/A N/A no limit ≥ 0,0100 N/A Criterion 3 (e): Preservatives no limit N/A N/A ≥ 0,0100 N/A Criterion 3 (f): Colorants N/A no limit N/A ≥ 0,0100 N/A Criterion 5. Sustainable sourcing of palm oil, palm kernel oil and their derivatives no limit no limit no limit ≥ 0,0100 no limit For the purpose of this Annex, the following definitions shall apply:

1) active content (AC) means the sum of organic ingoing substances in the product excluding the water content of the ingredients (expressed in grams), calculated on the basis of the complete formulation of the final product. Inorganic rubbing/abrasive agents are not included in the calculation of the active content;

2) ingoing substances means all substances in the product, including additives (e.g. preservatives and stabilisers) in the raw materials. Substances known to be released from ingoing substances (e.g. formaldehyde from preservatives and arylamine from azodyes and azopigments) shall also be regarded as ingoing substances. Residuals, pollutants, contaminants, by-products, etc. from production, incl. production of raw materials, that remain in the raw materials ≥ 1000 ppm (≥ 0.1000 % w/w ≥ 1000 mg/kg) are always regarded as ingoing substances, regardless of the concentration in the final product;

3) impurities means residuals, pollutants, contaminants, by products, etc. from production, incl. production of raw materials that remain in the raw material/ingredient and/or in the in the final product in concentrations less than 100 ppm (0.0100 % w/w, 100 mg/kg) in the rinse-off product;

4) microplastics means particles with a size of below 5 mm of insoluble macromolecular plastic, obtained through one of the following processes: a) a polymerisation process such as polyaddition or polycondensation or a similar process using monomers or other starting substances; b) chemical modification of natural or synthetic macromolecules; c) microbial fermentation;

5) primary packaging means packaging in direct contact with the content conceived so as to constitute the smallest sales unit of distribution to the final user or consumer at the point of purchase;

6) nanomaterial means an insoluble or biopersistant and intentionally manufactured material with one or more external dimensions, or an internal structure, on the scale from 1 to 100 nm, in accordance with Regulation (EC) No 1223/2009;

7) secondary packaging means packaging which can be removed from the product without affecting its characteristics and is conceived so as to constitute at the point of purchase a grouping of a certain number of sales units whether the latter is sold as such to the final user or consumer or whether it serves only as a means to replenish the shelves at the point of sale;

8) substances identified to have endocrine disrupting properties means substances which have been identified to have endocrine disrupting properties (human health and/or environment) according to Article 57(f) of Regulation (EC) No 1907/2006 of the European Parliament and of the Council (candidate list of substances of very high concern for authorisation), or according to Regulations (EU) No 528/2012 or (EC) No 1107/2009 of the European Parliament and of the Council.

EU ECOLABEL CRITERIA FOR ANIMAL CARE PRODUCTS

Criterion 1 Table 2 CDV limits

Toxicity to aquatic organisms: Critical Dilution Volume (CDV) This criterion applies to final products. The total CDV toxicity of the product shall not exceed the limits in Table 2: Product CDV (l/g AC) Animal care products 12000 The CDV shall be calculated using the following equation: CDV = ∑ CDV (ingoing substance i) = ∑ weight (i) x DF (i) x 1000/TF chronic (i) Where: weight (i) is the weight of the ingoing substance (in grams) per 1 gram of AC (i.e. normalised weight contribution of the ingoing substance to the AC) DF (i) is the degradation factor of the ingoing added substance TF chronic (i) is the toxicity factor of the ingoing added substance (in milligrams/litre) Assessment and verification: the applicant shall provide the calculation of the CDV of the product. A spreadsheet for calculation of the CDV value is available on the EU Ecolabel website. The values of DF and TF chronic shall be as given in the DID list-part A. If the ingoing substance is not included in the DID list-part A, the applicant shall determine the values using the guidelines described in the DID list-part B and attaching the associated documentation (for more information see the Appendix).

Criterion 2

Biodegradability

a)

Biodegradability of surfactants All surfactants shall be readily biodegradable under aerobic conditions and biodegradable under anaerobic conditions.

b) Table 3 aNBO and anNBO limits

Biodegradability of organic ingoing substances The content of all organic ingoing substances in the product that are aerobically non-biodegradable (not readily biodegradable) (aNBO) or anaerobically non-biodegradable (anNBO) shall not exceed the limits in Table 3: Product aNBO (mg/g AC) anNBO (mg/g AC) Animal care products 15 15 Assessment and verification: the applicant shall provide documentation for the biodegradability of surfactants, as well as the calculation of aNBO and anNBO for the product. A spreadsheet for calculating aNBO and anNBO values is available on the EU Ecolabel website. For surfactants biodegradability values as well for aNBO and anNBO values for organic ingoing substances, reference shall be made to the DID list. For ingoing substances which are not included in the DID list, the relevant information from literature or other sources, or appropriate test results, together with a toxicologist declaration showing that they are aerobically and anaerobically biodegradable shall be provided as described in the Appendix. In the absence of documentation in accordance with the above requirements, an ingoing substance other than a surfactant may be exempted from the requirement for anaerobic biodegradability if one of the following three conditions is fulfilled: Testing for adsorption/desorption may be conducted in accordance with Guidelines 106 of the Organisation for Economic Co-operation and Development (OECD).

1. the substance is readily degradable and has low adsorption (A < 25 %);

2. the substance is readily degradable and has high desorption (D > 75 %);

3. the substance is readily degradable and non-bioaccumulating.

Criterion 3

Excluded and restricted substances

3(a) Restrictions on ingoing substances classified under Regulation (EC) No 1272/2008 Criterion 3 (a) shall not apply to substances covered by Article 2(7)(a) and (b) of Regulation (EC) No 1907/2006 which sets out criteria for exempting substances within Annexes IV and V to that Regulation from the registration, downstream user and evaluation requirements. In order to determine whether that exclusion applies, the applicant shall screen any substance and mixture in the final product.

3(a) (i) Table 4 Table 5 Restricted hazard classes, categories and associated hazard statement codes Derogations to restrictions on ingoing substances classified under Regulation (EC) No 1272/2008

Unless derogated in Table 5, the product shall not contain substances at or above the concentration of 0.0100 % weight by weight, that meet the criteria for classification with thehazard classes, categories and associated hazard statement codes listed in Table 4, in accordance with Regulation (EC) No 1272/2008. Where stricter, the generic or specific concentration limits determined in accordance with Article 10 of Regulation (EC) No 1272/2008 shall prevail. Acute toxicity Categories 1 and 2 Category 3 H300 Fatal if swallowed H301 Toxic if swallowed H310 Fatal in contact with skin H311 Toxic in contact with skin H330 Fatal if inhaled H331 Toxic if inhaled H304 May be fatal if swallowed and enters airways EUH070 Toxic by eye contact Specific target on organ toxicity Category 1 Category 2 H370 Causes damage to organs H371 May cause damage to organs H372 Causes damage to organs through prolonged or repeated exposure H373 May cause damage to organs through prolonged or repeated exposure Respiratory and skin sensitisation Category 1A Category 1B H317 May cause allergic skin reaction H317 May cause allergic skin reaction H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled Hazardous to the aquatic environment Categories 1 and 2 Category 3 and 4 H400 Very toxic to aquatic life H412 Harmful to aquatic life with long-lasting effects H410 Very toxic to aquatic life with long-lasting effects H413 May cause long-lasting effects to aquatic life H411 Toxic to aquatic life with long-lasting effects Hazardous to the ozone layer H420 Harms public health and the environment by destroying ozone in the upper atmosphere Substance type Applicability Derogated hazard class, category and hazard statement code Derogation conditions Surfactants Animal care products H412: Harmful to aquatic life with long-lasting effects Total concentration < 20 % in the final product

(ii) Table 6 Excluded hazard classes, categories and associated hazard statement codes

Substances that meet the criteria for classification with the hazard statements listed in Table 6 shall not be contained in the final product or its ingredients, regardless of their concentration. Carcinogenic, mutagenic or toxic for reproduction Categories 1A and 1B Category 2 H340 May cause genetic defects H341 Suspected of causing genetic defects H350 May cause cancer H351 Suspected of causing cancer H350i May cause cancer by inhalation H360F May damage fertility H361f Suspected of damaging fertility H360D May damage the unborn child H361d Suspected of damaging the unborn child H360FD May damage fertility. May damage the unborn child H361fd Suspected of damaging fertility. Suspected of damaging the unborn child H360Fd May damage fertility. Suspected of damaging the unborn child H362 May cause harm to breast fed children H360Df May damage the unborn child. Suspected of damaging fertility

(iii) The final product shall not be classified and labelled as being acutely toxic, a specific target organ toxicant, a respiratory or skin sensitiser, carcinogenic, mutagenic or toxic for reproduction, or hazardous to the aquatic environment, as defined in Annex I to Regulation (EC) No 1272/2008 and in accordance with the list in Tables 4 and 6 of this Annex.

3(b) Notes: [1][2]

Specified excluded substances Substances listed under Annex II to Regulation (EC) No 1223/2009 shall not be present in the product, regardless of the concentration, neither as part of the formulation, as part of any mixture included in the formulation, nor as impurities. The following substances shall also not be included in the product, neither as part of the formulation, as part of any mixture included in the formulation, nor as impurities: Substance name = Alkyl phenol, under: https://echa.europa.eu/es/advanced-search-for-chemicals These substances may be allowed if present as impurities, but up to a total concentration of 500 ppm in the product formulation.

3(b)

(i) Alkyl phenol ethoxylates (APEOs) and other alkyl phenol derivatives [1];

(ii) Butylated Hydroxytoluene (BHT) and Butylated hydroxyanisole (BHA);

(iii) Cocamide DEA;

(iv) Deltamethrin;

(v) Diethylenetriaminepentaacetic acid (DTPA) and its salts;

(vi) Ethylenediaminetetraacetic acid (EDTA) and its salts and non-readily biodegradable phosphonates;

(vii) Microplastics and microbaeds;

(viii) Nanomaterials, unless used according to the conditions laid down for specific nanomaterials in Annexes III, IV and VI to Regulation (EC) No 1223/2009 ;

(ix) Nitromusks and polycyclic musks;

(x) Perfluorinated and polyfluorinated substances;

(xi) Phthalates;

(xii) Resorcinol;

(xiii) Sodium hypochlorite, chloramine and sodium chlorite;

(xiv) Sodium phosphate, dihydrate; Disodium phosphate, heptahydrate; Trisodium orthophosphate; and Phosphoric acid, trisodium salt, dodecahydrate [2];

(xv) Substances identified to have endocrine disrupting properties;

(xvi) The following fragrances: benzyl salicylate, butylphenyl metylpropional, tetramethyl acetyloctahydranophthalenes (OTNE);

(xvii) The following isoflavones: daidzein, genistein;

(xviii) The following preservatives: benzalkonium chloride, formaldehyde releasers, isothiazolinones, kojic acid, parabens, triclocarban, triclosan;

(xix) Triphenyl phosphate

3(c) Restrictions on Substances of Very High Concern (SVHCs) Substances meeting the criteria referred to in Article 57 of Regulation (EC) No 1907/2006 that have been identified according to the procedure described in Article 59 of that Regulation and included in the candidate list of substances of very high concern for authorisation shall not be present the product, regardless of their concentration.

3(d) Fragrances

3(d)

(i) Substances listed under Table 13-1 of the SCCS opinion on Fragrance allergens in cosmetic products shall not be present in EU Ecolabel products in concentrations higher than 0,0100 %.

(ii) Any substance or mixture added to the product as a fragrance shall be manufactured and handled following the code of practice of the International Fragrance Association (IFRA). The code can be found on the IFRA website: http://www.ifrafragrance.org/. The manufacturer shall follow the recommendations of the IFRA Standards concerning prohibition, restricted use and specified purity criteria for materials.

3(e) Preservatives

3(e)

(i) Preservatives classified as H317 or H334 shall be prohibited regardless of the concentration.

(ii) Preservatives in the product shall not release or degrade to substances that are classified in accordance with the requirements of criterion 3(a).

(iii) The product may contain preservatives provided that they are not bioaccumulating. A preservative is not considered bioaccumulating if BCF < 500 or log Kow < 4. If both BCF and log Kow values are available, the highest measured value shall be used.

3(f) Colorants Assessment and verification: The applicant shall provide a signed declaration of compliance with all above sub-criteria, supported by declarations from suppliers for criteria 3 (a) (ii), 3 (e), and 3 (f); and the following supporting evidence: To demonstrate compliance with sub-criteria 3(a), 3(b) and 3(c) the applicant shall provide: For substances exempted from requirement sub-criterion 3(a) (see Annexes IV and V to Regulation (EC) No 1907/2006), a declaration to this effect by the applicant shall suffice to demonstrate compliance. For requirement sub-criterion3(c), reference to the latest list of substances of very high concern shall be made on the date of application. To demonstrate compliance with sub-criterion 3(d), the applicant shall provide a signed declaration of compliance, supported by a declaration of the fragrance manufacturer, as appropriate. To demonstrate compliance with sub-criterion 3(e), the applicant shall provide: copies of the SDS of any preservative added, and information on its BCF and/or log Kow values. To demonstrate compliance with sub-criterion 3(f), the applicant shall provide: copies of the SDS of any colorant added together with information on its BCF and/or log Kow value, or documentation to ensure that the colouring agent is approved for use in food. The above evidence may also be provided directly to competent bodies by any supplier in the applicant's product supply chain.

3(f)

(i) Colorants classified as H317 or H334 shall be prohibited regardless of the concentration.

(ii) Colorants in the product shall not be bioaccumulating. A colorant is considered not bioaccumulating if BCF < 500 or log Kow < 4. If both BCF and log Kow values are available, the highest measured value shall be used. In the case of colouring agents approved for use in food, it is not necessary to submit documentation of bioaccumulation potential.

(i) SDS of any substance/mixture and their concentration in the final product.

(ii) a written confirmation that sub-criteria 3(a), 3(b) and 3(c) are fulfilled.

Criterion 4

Packaging The minimum volume for an animal care product to be certified shall be 150ml.

(a)Note:

Primary packaging Primary packaging shall be in direct contact with the contents. No additional packaging for the product as it is sold, e.g. cardboard over a bottle, shall be allowed, with the exception of secondary packaging which groups the product and its refill and products that include several elements for their use. For the products for domestic use sold with pump that can be opened without compromising the design, a refilling option shall be provided in the same or higher primary packaging capacity. Cardboard boxes used to transport the products to the retail stores shall not be considered as secondary packaging. Assessment and verification: the applicant shall provide a signed declaration and relevant evidence (e.g. pictures of the products as marketed).

(b)Note: [1] Packaging Impact Ratio (PIR) The Packaging Impact Ratio (PIR) shall be less than 0,20 g of packaging per gram of product for each of the packaging in which the product is sold. Products packed in metal aerosol containers shall be exempted from this requirement. PIR shall be calculated (separately for each of the packaging) as follows: PIR = (W + (Wrefill × F) + N + (Nrefill × F))/(D + (Drefill × F)) Where: W weight of packaging (primary + proportion of secondary (1), including labels)(g) Wrefill weight of refill packaging (primary + proportion of secondary (1), including labels) (g) N weight of non-renewable + non-recycled packaging (primary + proportion of secondary (1), including labels) (g) Nrefill weight of non-renewable and non-recycled refill packaging (primary + proportion of secondary (1), including labels) (g) D weight of product contained in the parent pack (g) Drefill weight of product delivered by the refill (g) F number of refills required to meet the total refillable quantity, calculated as follows: F = V × R/Vrefill Where: V volume capacity of the parent pack (ml) Vrefill volume capacity of the refill pack (ml) R the refillable quantity. This is the number of times that the parent pack can be refilled. Where F is not a whole number, it shall be rounded up to the next whole number. In case no refill is offered PIR shall be calculated as follows: PIR = (W + N)/D The manufacturer shall provide the number of foreseen refillings, or use the default values of R = 5 for plastics and R = 2 for cardboard. Primary packaging made of more than 80% of recycled materials shall be exempted from this requirement. Proportional weight of the grouping packaging (e.g. 50 % of the total grouping packaging weight, if two products are sold together). Assessment and verification: the applicant shall provide the calculation of the PIR of the product. A spreadsheet for this calculation is available on the EU Ecolabel website. If the product is sold in different packaging (i.e. with different volumes), the calculation shall be submitted for each packaging size for which the EU Ecolabel shall be awarded. The applicant shall provide a signed declaration from the packaging manufacturer for the content of post-consumer recycled material or material from renewable origin in the packaging and a description of the refill system offered, if applicable (kinds of refills, volume). For approval of refill packaging, the applicant or retailer shall demonstrate that the refills shall be available for purchase on the market. The applicant shall provide third party verification and traceability for postconsumer recycled content. Certificate of recyclers pursuant a certification scheme following standard EN15343 may be used to support verification. Certificates of product production for converters pursuant a certification scheme following a controlled blending model as described in the ISO 22095 may be used to support verification.

(c) Information and design of primary packaging

(c)

(i)Note:

Information on primary packaging Dosage and refills: Applicants shall indicate the correct dosage or the appropriate quantity to be used on the label of the primary packaging together with the following sentence: using the correct dosage of the product minimises impacts on the environment and saves money. In cases where the correct dosage cannot be defined for a specific product because it depends on consumer aspects (e.g. length of the hair), the following sentence shall be used instead: dose the product with care so as not to over-consume it unnecessarily If the product is refillable, the applicant shall complete the information with a reference to use refills in order to minimise impacts on the environment and save money. End of life information: Applicants shall include a sentence or a pictogram in relation to empty product disposal (e.g. when empty, the package/container should be disposed of in a dedicated container for recycling) Products whose dimensions do not allow a proper display of information due to lack of space or text legibility reasons shall be exempted from this requirement.

(ii)Notes: [1]

Design of primary packaging Applicants shall indicate the correct dosage or the appropriate quantity on the label of the primary packaging and a sentence which underlines the importance of using the correct dosage in order to minimise energy and water consumption, reduce water pollution and save money. The primary packaging shall be designed: Where: m1 Primary packaging and product (g) m2 Primary packaging and product residue in normal conditions of use (g) m3 Primary packaging emptied and cleaned (g) Rinse-off products whose primary packaging can be manually opened and the residue product can be extracted with adding water shall be exempted from the requirement in b). For liquid soap no pump or dispenser sold with the product may provide more than 2 g (or 3 ml) soap per full press. Assessment and verification: the applicant shall submit a description of the dosage device (e.g. schematic illustration, pictures…), the test report with results of measuring the residual quantity of the product in the packaging and a high resolution image of the product packaging that clearly shows the sentences indicated in sub-criterion 5 (c) (i) (if applicable). Applicant shall provide documented evidence of which case under sub-criterion 5 (c) (i) applies for their product(s). The test procedure for measuring the residual quantity is described in the user manual available on the EU Ecolabel website.

(ii) a)

to make correct dosage easy by using a pump [1] or ensuring that the opening at the top is not too wide. Refills are exempted from this requirement.

b)

to ensure that at least 95% of the product can be easily removed from the container. The residual amount of the product in the container (R), which must be below 5%, shall be calculated as follows: R = ((m2 – m3)/(m1 – m3)) × 100 ( %)

(d) Table 7 Materials and components excluded from packaging elements

Design for recycling of plastic packaging Plastic packaging shall be designed to facilitate effective recycling by avoiding potential contaminants and incompatible materials that are known to impede separation or reprocessing or to reduce the quality of recyclate. The label or sleeve, closure and, where applicable, barrier coatings shall not comprise, either singularly or in combination the materials and components listed in Table 7. Pumps and aerosol containers are exempted from this requirement. Packaging element Excluded material or component Label or sleeve Closure Barrier coatings Assessment and verification: the applicant shall submit a signed declaration of compliance specifying the material composition, supported by manufacturer documentation, of the packaging including the container, label or sleeve, adhesives, closure and barrier coating, together with a sample of primary packaging.

PS label or sleeve in combination with a PET, PP or HDPE packaging

PVC label or sleeve in combination with a PET, PP or HDPE packaging

PETG label or sleeve in combination with a PET packaging.

PET label or sleeve (except LDPET (< 1 g/cm3)) in combination with a PET packaging.

Any other plastic materials for sleeves/labels with a density > 1 g/cm3 used with a PET packaging

Any other plastic materials for sleeves/labels with a density < 1 g/cm3 used with a PP or HDPE packaging

Labels or sleeves that are metallised or are welded to a packaging body (in mould labelling).

PSL (pressure sensitive) label shall demonstrate that the adhesive is water releasable at washing conditions of the recycling process.

PET PSL label, unless the adhesive is water releasable at washing conditions of the recycling process and has no reactivation.

PS closure in combination a with a PET, PP or HDPE packaging

PVC closure in combination with a PET, PP or HDPE packaging

PETG closures and/or closure material with density of above 1 g/cm3 in combination with a PET packaging

Closures (or part of) made of metal, glass, EVA

Closures (or part of) made of silicone. Exempted are silicone closures with a density < 1 g/cm3 in combination with a PET packaging and silicone closures with a density > 1g/cm3 in combination with PP or HDPE packaging

Metallic foils or seals which remain fixed to the bottle or its closure after the product has been opened

Polyamide, EVOH provided with tie layers made by a polymer different that the one used for the packaging body, functional polyolefins, metallised and light blocking barriers

Criterion 5 Notes: [1]

Sustainable sourcing of palm oil, palm kernel oil and their derivatives In the specific case of renewable ingredients from palm oil or palm kernel oil, or derived from palm oil or palm kernel oil, 100 % w/w of the renewable ingredients used shall meet the requirements for sustainable production of a certification scheme that is a multi-stakeholder organisation with a broad membership, including non-governmental organisations (NGOs), industry, financial institutions and government and that addresses environmental impacts on soil, biodiversity, organic carbon stocks and conservation of natural resources. Assessment and verification: To demonstrate compliance, evidence through third-party chain of custody certificating that the raw materials used in the product or in its manufacturing originate from sustainably managed plantations shall be provided. For palm oil and palm kernel oil, Roundtable for Sustainable Palm Oil (RSPO) certificates or certificates of any equivalent or stricter sustainable production scheme demonstrating compliance to any of the following models shall be accepted: For palm oil and palm kernel oil derivatives, RSPO certificates or certificates of any equivalent or stricter sustainable production scheme demonstrating compliance to any of the following models shall be accepted: identity preserved, segregated, and mass balance. For palm oil, palm kernel oil and their derivatives, a mass balance calculation and/or invoices/delivery notes from the raw material producer shall be provided, showing that the proportion of certified raw material corresponds to the amount of certified palm oil, palm kernel oil and/or their derivatives. Alternatively, a declaration from the producer of raw materials shall be provided, showing that all purchased palm oil, palm kernel oil and/or their derivatives are certified. Competent bodies shall annually check the validity of the certificates for each certified product/ingredient [1]. The verification can be done via RSPO website, where the status of the Certificate is showed in real time: https://www.rspo.org/certification/search-for-supply-chain-certificate-holders

until 1st January 2025: identity preserved, segregated, and mass balance;

after 1st January 2025: identity preserved and segregated.

Criterion 6

Fitness for use The animal care product’s capacity to fulfil its primary function (e.g. cleaning, conditioning) and any secondary functions claimed (e.g. colour protection, moisturizing) shall be supported by adequate and verifiable studies, data and information of ingredients. Carrying out of animal testing of final formulations, ingredients or combinations of ingredients shall be strictly prohibited. Assessment and verification: The applicant shall present studies, data and information of ingredients or final formulation to demonstrate that the product fulfils the primary and secondary functions claimed on the product label or packaging.

Criterion 7

Information appearing on the EU Ecolabel for animal care products The optional label with box shall contain the following information: The applicant shall follow the instructions on how to properly use the EU Ecolabel logo provided in the EU Ecolabel Logo Guidelines: http://ec.europa.eu/environment/ecolabel/documents/logo_guidelines.pdf Assessment and verification: The applicant shall provide a declaration of compliance with this criterion, supported by a high resolution image of the product packaging that clearly shows the label, the registration/licence number and, where relevant, the statements that can be displayed together with the label.

Fulfills strict requirements on harmful substances;

Tested performance (not animal tested);

Less packaging waste.

Appendix Detergents Ingredients Database (DID) list

The DID list (Part A) is a list containing information on the aquatic toxicity and biodegradability of ingredients typically used in detergent formulations. The list includes information on the toxicity and biodegradability of a range of substances used in washing and cleaning products. The list is not comprehensive, but guidance is given in Part B of the DID list concerning the determination of the relevant calculation parameters for substances not present on the DID list (e.g. the Toxicity Factor (TF) and degradation factor (DF), which are used for the calculation of the critical dilution volume). The list is a generic source of information and substances present on the DID list are not automatically approved for use in EU Ecolabel products. Part A and Part B of the DID list can be found on the EU Ecolabel website at: https://ec.europa.eu/environment/ecolabel/documents/DID%20List%20PART%20A%202016%20FINAL.pdf https://ec.europa.eu/environment/ecolabel/documents/DID_List_PART_B_2016_FINAL.pdf For substances with no data regarding aquatic toxicity and biodegradability, structure analogies with similar substances may be used to assess the TF and DF. Such structure analogies shall be approved by the competent body granting the EU Ecolabel license. Alternatively, a worst case approach shall be applied, using the parameters below: Worst case approach: Acute toxicity Chronic toxicity Degradation Ingoing added substance LC50/ EC50 SF (acute) TF (acute) NOEC (1) SF (chronic) TF (chronic) DF Aerobic Anaerobic Name 1mg/l 10000 0,0001 0,0001 1 P N

Documentation of ready biodegradability

The following test methods for ready biodegradability shall be used:

(1) Until 1 December 2015: The test methods for ready biodegradability provided for in Council Directive 67/548/EEC, in particular the methods detailed in Annex V.C4 to that Directive, or their equivalent OECD 301 A-F test methods, or their equivalent ISO tests. The 10-day window principle shall not apply for surfactants. The pass levels shall be 70 % for the tests referred to in Annex V.C4-A and C4-B to Directive 67/548/EEC (and their equivalent OECD 301 A and E tests and ISO equivalents), and shall be 60 % for tests C4-C, D, E and F (and their equivalent OECD 301 B, C, D and F tests and ISO equivalents). or The test methods provided for in Regulation (EC) No 1272/2008.

(2) After 1 December 2015: The test methods provided for in Regulation (EC) No 1272/2008

Documentation of anaerobic biodegradability

The reference test for anaerobic biodegradability shall be EN ISO 11734, ECETOC No 28 (June 1988), OECD 311 or an equivalent test method, with the requirement of 60 % ultimate biodegradability under anaerobic conditions. Test methods simulating the conditions in a relevant anaerobic environment may also be used to document that 60 % ultimate biodegradability has been attained under anaerobic conditions.

Extrapolation for substances not listed in the DID-list

Where the ingoing substances are not listed in the DID-list, the following approach may be used to provide the necessary documentation of anaerobic biodegradability:

(1) Apply reasonable extrapolation. Use test results obtained with one raw material to extrapolate the ultimate anaerobic biodegradability of structurally related surfactants. Where anaerobic biodegradability has been confirmed for a surfactant (or a group of homologues) according to the DID-list, it can be assumed that a similar type of surfactant is also anaerobically biodegradable (e.g., C12-15 A 1-3 EO sulphate [DID No 8] is anaerobically biodegradable, and a similar anaerobic biodegradability may also be assumed for C12-15 A 6 EO sulphate). Where anaerobic biodegradability has been confirmed for a surfactant by use of an appropriate test method, it can be assumed that a similar type of surfactant is also anaerobically biodegradable (e.g., literature data confirming the anaerobic biodegradability of surfactants belonging to the group alkyl ester ammonium salts may be used as documentation for a similar anaerobic biodegradability of other quaternary ammonium salts containing ester-linkages in the alkyl chain(s)). Nevertheless, vice-versa if a structurally similar surfactant has been shown not to be anaerobically degradable, it can be assumed that a similar type of surfactant is also not anaerobically biodegradable.

(2) Perform screening test for anaerobic biodegradability. If new testing is necessary, perform a screening test by use of EN ISO 11734, ECETOC No 28 (June 1988), OECD 311 or an equivalent method.

(3) Perform low-dosage biodegradability test. If new testing is necessary, and in the case of experimental problems in the screening test (e.g. inhibition due to toxicity of test substance), repeat testing by using a low dosage of surfactant and monitor degradation by 14C measurements or chemical analyses. Testing at low dosages may be performed by use of OECD 308 (August 2000) or an equivalent method.

Documentation of bioaccumulation

The following test methods for bioaccumulation shall be used:

(1) Until 1 March 2009: The reference test for bioaccumulation shall be OECD 107 or 117 or equivalent. The pass levels shall be < 500 or log Kow is < 4,0. The OECD 305 test on fish. For a BCF < 500 the substance is considered not bioaccumulative. If there is a measured BCF value, it is always the highest measured BCF that is used in assessing a substance’s bioaccumulative potential.

(2) After 1 March 2009: The reference test for bioaccumulation shall be OECD 107 or 117 or equivalent with the requirement of < 500 or log Kow is < 4,0

Documentation on aquatic toxicity:

The lowest available NOEC/ECx/EC/LC50 value shall be used. If chronic values are available, they shall be used instead of acute ones. For acute aquatic toxicity test methods nos. 201, 202 and 203 in the OECD Guideline for the Testing of Chemicals or equivalent test methods shall be used. For chronic aquatic toxicity test methods nos. 210, 211, 215 and 229 in the OECD Guideline for the Testing of Chemicals or equivalent test methods shall be used. OECD 201 may be used as chronic test if chronic endpoints are chosen.

Versions

1. 2021-10-22

Cited by

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  Commission Decision (EU) 2021/1870 established EU Ecolabel criteria and related assessment and verifications requirements for the product groups cosmetic products and animal care products.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  Industry stakeholders and members of the EU Ecolabelling Board have indicated that some provisions of Decision (EU) 2021/1870 could be interpreted in different ways, which could lead to inconsistencies in the practical implementation of that Decision. To avoid such inconsistent application, and to ensure legal clarity and legal certainty, it is necessary to provide for clearer wording in those provisions.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  The definition of active content in the framework section of Annexes I and II to Decision (EU) 2021/1870 contains a mistake that should be corrected to clarify that it is organic rubbing/abrasive agents that are not to be included in the calculation of the active content of the cosmetic product or of the animal care products. Inorganic substances, including inorganic rubbing/abrasive agents, are in fact excluded by definition.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  To ensure the correct application of sub-criterion 4(a)(iii) in Annex I to Decision (EU) 2021/1870- i.e. exemption of zinc compounds, classified as H410 according to Regulation (EC) No 1272/2008 of the European Parliament and of the Council, in zinc ointment/cream- sub-criterion 4(a)(i) should be corrected to specify that substances that are exempted in sub-criterion 4(a)(iii) do not have to comply with the requirements set out in sub-criterion 4(a)(i).

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  In order to ensure the correct application of sub-criterion 4(b) in Annex I and of sub-criterion 3(b) in Annex II to Decision (EU) 2021/1870, those sub-criteria should be corrected to specify that substances listed in the sub-criteria can be present in the final product if occurring in the form of impurities. That is needed to make the requirements consistent with the information reported in Table 1 in Annex I to Decision (EU) 2021/1870 and in Table 1 in Annex II to that Decision as regards those sub-criteria.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  In order to ensure the correct application of sub-criterion 4(c) in Annex I and of sub-criterion 3(c) in Annex II to Decision (EU) 2021/1870, footnote 12 in Annex I and footnote 10 in Annex II should be corrected to spell out the correct link that applicants of the EU Ecolabel should use.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  In order to clarify the interpretation of the introductory sentence of criterion 5 in Annex I and of criterion 4 in Annex II to Decision (EU) 2021/1870, that introductory sentence should be corrected to spell out that only liquid products need to comply with the requirement on the minimum volume of packaging allowed, as the unit in that sentence already suggests.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  In order to ensure the correct application of sub-criterion 5(d) in Annex I and of sub-criterion 4(d) in Annex II to Decision (EU) 2021/1870, in line with the state-of-the-art of recycling technologies and with the discussions held with stakeholders during the EU Ecolabel criteria revision process, Table 8 in Annex I and Table 7 in Annex II should be amended to specify that polypropylene (PP) labels and polyolefins sleeves used in a PP packaging and polyethylene (PE) labels and PE sleeves used in a high-density polyethylene packaging are allowed in EU Ecolabel products.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  In order to ensure the correct verification of criterion 3 in Annex II to Decision (EU) 2021/1870, the assessment and verification section of that criterion should be corrected to ensure that applicants to the EU Ecolabel submit the Safety Data Sheet (SDS) of the final product, in addition to the SDSs of any substance and mixture in the final product, to prove the compliance with that criterion.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  Decision (EU) 2021/1870 should therefore be amended and corrected accordingly.The measures provided for in this Decision are in accordance with the opinion of the Committee established by Article 16 of Regulation (EC) No 66/2010.

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  Decision (EU) 2021/1870 is amended and corrected as follows:

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  Annex I to Decision (EU) 2021/1870 is amended and corrected as follows:

• Commission Decision (EU) 2023/1540 of 25 July 2023 amending and correcting Decision (EU) 2021/1870 establishing EU Ecolabel criteria for cosmetic products and animal care products (notified under document C(2023) 4845) (Text with EEA relevance) Decision · Grade B

  Annex II to Decision (EU) 2021/1870 is amended and corrected as follows: