Address https://gelex.eu/eli/EU/decision/2024/367@2024-01-23/en

Contents

1. Preamble
2. 1. Article 1 European positive lists
   2. Article 2 Definitions
   3. Article 3 Transitional provision
   4. Article 4 Entry into force
3. ANNEX
4. ANNEX I Table 1 (*) Table 2 Notes: 1.A.B.C.D.E. 2. 3. Table 3 Table 4 EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS European positive lists of individual starting substances for organic materials European positive lists of groups of starting substances for organic materials Total MTC(T)tap, organics values for groups of listed starting substances MTCtap, organics for degradation products of stabilisers with alkylphenol structural moieties that are listed in the European positive list for organic materials
5. a)
6. b)
7. c)
8. d)
9. e)
10. i.
11. ii.
12. iii.
13. iv.
14. v.
15. vi.
16. vii.
17. viii.
18. ix.
19. x.
20. xi.
21. xii.
22. xiii.
23. xiv.
24. ANNEX II Table 1 Table 2 Notes: 1.A. 2. EUROPEAN POSITIVE LIST OF COMPOSITIONS OF METALLIC MATERIALS AND GROUPS OF COMPOSITIONS FOR METALLIC MATERIALS European positive list of individual metallic compositions for metallic materials European positive list of groups of metallic compositions for metallic materials
25. a)
26. b)
27. ANNEX III Table 1 Table 2 Table 3 Notes: 1. 2. 3. EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS List of generic constituents of cementitious materials Positive list of individual organic constituents for cementitious materials European positive lists of groups of organic constituents for cementitious materials
28. i.A.B.
29. i.
30. ii.
31. iii.
32. iv.
33. v.
34. vi.
35. vii.
36. viii.
37. ANNEX IV Table 1 Notes: 1.A. 2. EUROPEAN POSITIVE LIST OF COMPOSITIONS OF ENAMELS, CERAMIC AND OTHER INORGANIC MATERIALS European positive lists of compositions of enamels, ceramics and other inorganic materials
38. ANNEX V Table 1 Notes: MTCTAP FOR METALS OF RELEVANCE IN THE MIGRATION WATER MTCtap for metals for the specific material types

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive (EU) 2020/2184 of the European Parliament and of the Council of 16 December 2020 on the quality of water intended for human consumption, and in particular Article 11(2), point (b), thereof,

Whereas:

(1) Directive (EU) 2020/2184 provides for the establishment of European positive lists of substances, compositions and constituents for each type of materials, namely organic, cementitious, metallic, enamels, ceramic or other inorganic materials, which are authorised for use in the manufacture of materials or products that come into contact with water intended for human consumption and fall within the scope of Article 11 of that Directive. These European positive lists should include, where appropriate, conditions for the use of substances, compositions and constituents and migration limits, which are to be determined on the basis of the methodologies adopted pursuant to Article 11(2), point (a), of Directive (EU) 2020/2184. Such conditions of use may include a purity criterion, a condition on the physico-chemical characteristics of the starting substance, composition or constituent, a condition on its manufacturing process or on the manufacturing process of final materials, their use for certain products, the use of these products, or further testing requirement. Sacrificial anodes, membranes and ions exchange resins are water treatment chemicals and/or filter media and are covered by Article 12 of Directive (EU) 2020/2184, therefore they are excluded from the scope of Article 11 of that Directive.

(2) Article 11(3) of the Directive sets out that lists established by the Commission pursuant to Article 5 of Regulation (EC) No 1935/2004 of the European Parliament and of the Council should be used as a source to establish the first European positive lists under the Directive. The list established in Annex I to Commission Regulation (EU) No 10/2011 is one of these lists. However, substances included on this list have only been assessed for their use in plastic food contact materials in accordance with Regulation (EU) No 10/2011, subject to specific conditions of use. Moreover, the European Food Safety Authority has indicated that a significant number of the substances should be prioritised for re-evaluation as no specific migration limit was established when they were authorised for use in plastic food contact materials. The inclusion of such substances in Annex I to Regulation (EU) No 10/2011 nevertheless provides a much higher level of certainty over their safety in contact with drinking water when used in the manufacture of drinking water products, than would be the case for unlisted substances. Therefore it is appropriate to add substances originating from lists established by the Commission pursuant to Article 5 of Regulation (EC) No 1935/2004 to the first European list under Article 11(3) of the Directive, provided these additions are only used as a starting point for further conformity assessment in accordance with Article 11(8), and provided their re-evaluation by the expiry date set out in the first European positive list takes account of all the conditions and drinking water materials in which they may be used.

(3) Where applicable, the migration limit, i.e. the maximum tolerable concentration at the tap, should be based on the parametric value set out in Part B or C of Annex I to Directive (EU) 2020/2184 or the specific migration limit set out in Annexes I and II to Regulation (EU) No 10/2011. This should, however, be done after application of an allocation factor to account for the proportion of potential exposure from materials in contact with water intended for human consumption derived from the information provided by Member States.

(4) Annex I to Regulation (EU) No 10/2011 provides further detail on conditions of use of authorised substances, as well FCM substance reference numbers used in risk assessments. To facilitate further conformity assessment of substances that are added to the first European positive list on the basis of Annex I to Regulation (EU) No 10/2011, it is appropriate to add their FCM reference numbers in the first European positive lists.

(5) The expiry dates included in the first European positive lists follow the recommendation from European Chemicals Agency (ECHA) in particular on the basis of the hazardous properties of the starting substance, composition or constituent, the quality of the underlying risk assessments, the extent to which those risk assessments are up-to-date and the need for a staggered review of these entries.

(6) Some entries in the European positive lists should be allowed to be combined, extended to related starting substances, compositions and constituents or extended for use in different material types than the one for which they have been authorised when such combination or extension has no impact on the protection of human health to ensure the proportionality and efficiency of the process.

(7) Based on notifications from Member States, the first European positive lists include group entries covering multiple starting substances, compositions or constituents. Assessing the safety of each individual starting substance, composition or constituent separately is more appropriate to assess the safety of the groups; however, at the time of adopting the first European positive list it was not possible to identify the starting substances or organic cementitious constituents in those groups. Therefore, group entries should progressively be replaced in the European positive lists by the individual starting substances, compositions or constituents in the group and the economic operator should only be able to rely on such group entries for the first European positive list if it is able to demonstrate the safety of its starting substance, composition or constituent.

(8) In order to ensure an orderly and efficient application process, an entry may be renewed provided that notification of intention and, subsequently, an application is submitted to ECHA within a set deadline.

(9) Member States’ national provisions with regard to starting substances, compositions and constituents and their national positive lists were notified to ECHA by 12 July 2021. In order to allow national authorities sufficient time to prepare for the application of the European positive lists, the application of this act will start from 31 December 2026. The national systems are to apply until 31 December 2026. In addition, transitional measures should be provided for substances, compositions and constituents approved in the national systems from 13 July 2021 to 31 December 2026, provided that in accordance with Part B of Annex I to Directive (EU) 2020/2184, these substances do not exceed the parametric value of 5 μg/l for lead (Pb) at the tap.

(10) The measures provided for in this Decision are in accordance with the opinion of the Committee referred to in Article 22(1) of Directive (EU) 2020/2184,

HAS ADOPTED THIS DECISION:

Article 1 European positive lists

This Decision establishes the following:

(a) the European positive list of starting substances for organic materials and groups of starting substances for organic materials as set out in Tables 1 and 2 of Annex I respectively;

(b) the European positive list of compositions of metallic materials and groups of compositions for metallic materials as set out in Tables 1 and 2 of Annex II respectively;

(c) the European positive list of organic constituents of cementitious materials and groups of organic constituents for cementitious materials as set out in Tables 2 and 3 of Annex III respectively;

(d) the European positive list of compositions of enamels, ceramic and other inorganic materials as set out in Table 1 of Annex IV.

Article 2 Definitions

For the purpose of this Decision, the following definitions shall apply:

(1) material means a solid, semi-solid or liquid that is used for the manufacturing of a product that is:

(a) an organic composition prepared from one or more starting substances; or

(b) a cementitious composition prepared from one or more constituents; or

(c) a metallic, enamel, ceramic or other inorganic composition;

(2) monomer means a substance which is capable of forming covalent bonds with a sequence of additional like or unlike molecules under the conditions of the relevant polymer-forming reaction used for the particular process;

(3) organic material means a material that mainly consist of carbon-based substances;

(4) monomer unit means the reacted form of a monomer substance in a polymer;

(5) polymer means a substance consisting of molecules that are characterised by the sequence of one or more types of monomer units ant that are distributed over a range of molecular weights wherein differences in the molecular weight are primarily attributable to differences in the number of monomer units comprising the following:

(a) a simple weight majority of molecules containing at least three monomer units which are covalently bound to at least one other monomer unit or other reactant;

(b) less than a simple weight majority of molecules of the same molecular weight;

(6) polymerised part means the part of a substance composition consisting of molecules characterised by the sequence of one or more types of monomer units. Molecules such as dimers, trimers contribute also to the polymerised part. However, the term polymerised part does not cover unreacted monomer or unreacted other reactants;

(7) pre-polymer is a substance resulting from a polymerisation-type of reaction and that is further reacted into a final polymer in a material or product;

(8) organic cementitious constituent means an organic substance that is used in the manufacture of cementitious materials;

(9) cement means a finely ground inorganic material which, when mixed with water, forms a paste that sets and hardens by means of hydration reactions and processes and which, after hardening, retains its strength and stability even under water;

(10) cementitious material means a material that contains a hydraulic cement in sufficient proportion to act as the main binder by forming a hydrate structure which governs the performance of the material;

(11) non-intentionally added species means either one of the following:

(a) an impurity of a starting substance or organic cementitious constituent or composition;

(b) a reaction product or a degradation product of a starting substance or organic cementitious constituent that forms during the processing or use of the material;

(c) a reaction product or a degradation product of a starting substance or organic cementitious constituent that forms in contact with water during the use of the material;

(12) metallic material means a metal or metal alloy used either in bulk form or as metallic plating;

(13) ceramic materials means inorganic poly- or single crystalline, non-metallic solid materials subjected to high temperature in manufacture;

(14) enamel means a material that is a vitreous material obtained by melting at temperatures higher than 1200 °C and fritting of a mixture of inorganic substances;

(15) maximum tolerable concentration at the tap (MTCtap) means the maximum permitted concentration of a substance transferred from a specific material into water intended for human consumption.

Article 3 Transitional provision

Starting substances, compositions and constituents which have been approved by a Member State competent authority during the period from 13 July 2021 to 31 December 2026 in accordance with national provisions may be used in the manufacture of materials or products that come into contact with water intended for human consumption until 31 December 2032, provided they comply with the parametric value of 5 μg/l Pb (lead) at the tap as set out in Part B of Annex I to Directive (EU) 2020/2184.

Article 4 Entry into force

This Decision shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. It shall apply from 31 December 2026.

Done at Brussels, 23 January 2024. For the Commission The President Ursula von der Leyen

ANNEX

ANNEX I Table 1 (*) Table 2 Notes: 1.A.B.C.D.E. 2. 3. Table 3 Table 4 EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS European positive lists of individual starting substances for organic materials European positive lists of groups of starting substances for organic materials Total MTC(T)tap, organics values for groups of listed starting substances MTCtap, organics for degradation products of stabilisers with alkylphenol structural moieties that are listed in the European positive list for organic materials

EUPL Number EC Number CAS Number FCM substance Number (A) Starting substance name Technical function (B) Drinking water contact materials (C) Maximum Tolerable Concentration at the tap in organic materials (MTCtap, organics) in μg/l Total Maximum Tolerable Concentration at the tap (MTC(T)tap, organics) in μg/l (D) Conditions of use Expiry date Value for the starting substance Values for other relevant chemical species (E) 0001 1 albumin Monomer or other reactant All 31 December 2028 0002 2 albumin, coagulated by formaldehyde Monomer or other reactant All 31 December 2028 0003 7 acetylacetic acid, salts Additive or polymer production aid All 31 December 2028 0004 18 aluminium calcium hydroxide phosphite, hydrate Additive or polymer production aid All For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0005 21 carbonic acid, salts Additive Polymer production aid Aid to polymerisation All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0006 24 cotton fibres Additive All 31 December 2028 0007 29 di-n-octyltin bis(ethyl maleate) Additive or polymer production aid All (10) 31 December 2034 0008 30 di-n-octyltin 1,4-butanediol bis(mercaptoacetate) Additive or polymer production aid All (10) 31 December 2028 0009 32 di-n-octyltin dimaleate, polymers (n = 2-4) Additive or polymer production aid All (10) 31 December 2034 0010 33 di-n-octyltin thiobenzoate 2-ethylhexyl mercaptoacetate Additive or polymer production aid All (10) 31 December 2028 0011 34 ethylhydroxymethylcellulose Additive or polymer production aid All 31 December 2028 0012 35 ethylhydroxypropylcellulose Additive or polymer production aid All 31 December 2028 0013 36 fats and oils, from animal or vegetable food sources Polymer production aid Additive Other (processing aid) All 31 December 2028 0014 37 fats and oils, hydrogenated, from animal or vegetable food sources Polymer production aid Additive All 31 December 2028 0015 39 glass microballs Additive All 31 December 2028 0016 54 glycerol monooleate, ester with ascorbic acid Additive or polymer production aid All 31 December 2028 0017 55 glycerol monooleate, ester with citric acid Additive or polymer production aid All 31 December 2028 0018 56 glycerol monopalmitate, ester with ascorbic acid Additive or polymer production aid All 31 December 2028 0019 57 glycerol monopalmitate, ester with citric acid Additive or polymer production aid All 31 December 2028 0020 58 glycerol monostearate, ester with ascorbic acid Additive or polymer production aid All 31 December 2028 0021 59 glycerol monostearate, ester with citric acid Additive or polymer production aid All 31 December 2028 0022 60 glycine, salts Additive or polymer production aid All 31 December 2028 0023 62 lysine, salts Additive or polymer production aid All 31 December 2028 0024 63 manganese pyrophosphite Additive or polymer production aid All For manganese, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0025 64 methylhydroxymethylcellulose Additive or polymer production aid All 31 December 2028 0026 70 polyacrylic acid, salts Additive or polymer production aid All (21) 31 December 2037 0027 71 polydimethylsiloxane, γ-hydroxy propylated Additive or polymer production aid All 300 31 December 2034 0028 72 polyester of adipic acid with glycerol or pentaerythritol, esters with even numbered, unbranched C12-C22 fatty acids Additive or polymer production aid Plastics (31) Purity of starting substance: the fraction with molecular weight below 1000 Da shall not exceed 5 % (w/w). 31 December 2034 0029 74 polyethyleneglycol diricinoleate Additive or polymer production aid All 2100 31 December 2034 0030 75 polyethyleneglycol esters of aliph. monocarb. acids (C6-C22) and their ammonium and sodium sulfates Additive Polymer production aid Other (processing aid) All For ammonium, refer to Annex V. 31 December 2037 0031 76 polyethylene glycol (EO = 1-30, typically 5) ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate Additive or polymer production aid Plastics 2,5 Only for use in PET. 31 December 2034 0032 77 polyethyleneglycol (EO = 1-30, typically 5) ether of butyl-2-cyano-3-(4-hydroxyphenyl) acrylate Additive or polymer production aid Plastics 2,5 Only for use in PET. 31 December 2034 0033 79 polyoxyalkyl (C2-C4) dimethyl polysiloxane Additive Polymer production aid All 31 December 2034 0034 81 propylhydroxyethylcellulose Additive or polymer production aid All 31 December 2028 0035 82 propylhydroxymethylcellulose Additive or polymer production aid All 31 December 2028 0036 83 propylhydroxypropylcellulose Additive or polymer production aid All 31 December 2028 0037 84 silicates, natural (with the exception of asbestos) Additive All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0038 85 silicates, natural, silanated (with the exception of asbestos) Additive All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0039 86 silicic acid, silylated Additive All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0040 87 silicon dioxide, silanated Additive All For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0041 88 sodium monoalkyl dialkylphenoxybenzenedisulfonate Additive or polymer production aid All 450 31 December 2028 0042 90 taurine, salts Additive or polymer production aid All 31 December 2031 0043 91 tetradecyl-polyethyleneglycol(EO = 3-8) ether of glycolic acid Additive or polymer production aid All 750 31 December 2034 0044 92 tricyclodecanedimethanol bis(hexahydrophthalate) Additive or polymer production aid All 2,5 31 December 2028 0045 93 waxes, paraffinic, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, low viscosity Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) All 2,5 Average molecular weight not less than 350 Da. Viscosity at 100 °C not less than 2,5 cSt (2,5 × 10-6 m2 /s). Content of hydrocarbons with carbon number less than 25, not more than 40 % (w/w). 31 December 2028 0046 94 waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks, high viscosity Additive Polymer production aid All Average molecular weight not less than 500 Da. Viscosity at 100 °C not less than 11 cSt (11 × 10-6 m2 /s). Content of mineral hydrocarbons with carbon number less than 25, not more than 5 % (w/w). 31 December 2028 0047 95 white mineral oils, paraffinic, derived from petroleum based hydrocarbon feedstocks Monomer or other reactant (base oil) Additive Polymer production aid All Average molecular weight not less than 480 Da. Viscosity at 100 °C not less than 8,5 cSt (8,5 × 10-6 m2 /s). Content of mineral hydrocarbons with carbon number less than 25, not more than 5 % (w/w). 31 December 2028 0048 97 petroleum hydrocarbon resins (hydrogenated) Monomer or other reactant (resin) Additive All 150 (Note: based on a notified national approval) Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermal polymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoidarylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: 31 December 2028 0049 50-00-0 98 formaldehyde Monomer or other reactant All (15) 31 December 2028 0050 50-70-4 100 sorbitol Monomer or other reactant Additive All 31 December 2037 0051 50-81-7 101 ascorbic acid Monomer or other reactant All 31 December 2037 0052 56-81-5 103 glycerol Monomer or other reactant Additive Polymer production aid Other (processing aid) All 31 December 2037 0053 57-09-0 104 hexadecyltrimethylammonium bromide Additive Polymer production aid All 300 31 December 2034 0054 57-10-3 105 palmitic acid Monomer or other reactant Polymer production aid Other (processing aid) All 31 December 2037 0055 57-11-4 106 stearic acid Monomer or other reactant Additive Polymer production aid Aid to polymerisation Other (processing aid) All 31 December 2037 0056 57-13-6 107 urea Monomer or other reactant Additive Polymer production aid Other (processing aid) All 31 December 2037 0057 57-50-1 108 sucrose Monomer or other reactant All 31 December 2037 0058 60-00-4 111 ethylenediaminetetraacetic acid (EDTA) Additive Polymer production aid All 60 31 December 2034 0059 60-33-3 112 linoleic acid Monomer or other reactant All 31 December 2037 0060 64-17-5 113 ethanol Monomer or other reactant Additive Polymer production aid All 31 December 2034 0061 64-18-6 114 formic acid Monomer or other reactant Polymer production aid Other (processing aid) All 31 December 2034 0062 64-19-7 115 acetic acid Monomer or other reactant Additive Polymer production aid Other (processing aid) All 31 December 2037 0063 65-85-0 116 benzoic acid Monomer or other reactant Polymer production aid Aid to polymerisation All 31 December 2034 0064 67-56-1 117 methanol Monomer or other reactant All 31 December 2034 0065 67-63-0 118 2-propanol Monomer or other reactant Polymer production aid All 31 December 2034 0066 67-64-1 119 acetone Polymer production aid All 31 December 2034 0067 67-68-5 120 dimethyl sulfoxide Polymer production aid All 31 December 2034 0068 69-72-7 121 salicylic acid Monomer or other reactant, aid to polymerisation, Other (processing aid) Coatings Rubber 31 December 2028 0069 71-23-8 122 1-propanol Monomer or other reactant All 31 December 2034 0070 71-36-3 123 1-butanol Monomer or other reactant Polymer production aid All 31 December 2034 0071 71-41-0 124 1-pentanol Monomer or other reactant All 31 December 2034 0072 74-85-1 125 ethylene Monomer or other reactant All 31 December 2034 0073 74-86-2 126 acetylene Monomer or other reactant All 31 December 2034 0074 75-01-4 127 vinyl chloride Monomer or other reactant All 0,5 Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2028 0075 75-07-0 128 acetaldehyde Monomer or other reactant All (1) 31 December 2028 0076 75-21-8 129 ethylene oxide Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2028 0077 75-35-4 130 vinylidene chloride Monomer or other reactant All 0,1 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0078 75-37-6 131 1,1-difluoroethane Additive or polymer production aid All 31 December 2034 0079 75-38-7 132 vinylidene fluoride Monomer or other reactant All 250 31 December 2034 0080 75-44-5 133 carbonyl chloride Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034 0081 75-45-6 134 chlorodifluoromethane Additive or polymer production aid All 300 Content of chlorofluoromethane less than 1 mg/kg of the substance. 31 December 2034 0082 76-22-2 136 camphor Additive or polymer production aid All 31 December 2034 0083 77-62-3 137 2,2′-methylenebis(4-methyl-6-(1- methylcyclohexyl)phenol) Additive All (5) 31 December 2034 0084 77-90-7 138 tri-n-butyl acetyl citrate Additive or polymer production aid All (31) 31 December 2034 0085 77-92-9 139 citric acid Monomer or other reactant Polymer production aid Other (processing aid) All 31 December 2037 0086 77-93-0 140 citric acid, triethyl ester Additive or polymer production aid All (31) 31 December 2034 0087 77-99-6 141 1,1,1-trimethylolpropane Monomer or other reactant Additive All 300 31 December 2034 0088 78-08-0 142 vinyltriethoxysilane Additive Other (processing aid) All 2,5 Only to be used as a surface treatment agent. 31 December 2034 0089 78-78-4 143 isopentane Additive or polymer production aid All 31 December 2034 0090 78-79-5 144 2-methyl–1,3-butadiene (isoprene) Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2028 0091 79-06-1 145 acrylamide Monomer or other reactant All 0,1 31 December 2028 0092 79-09-4 146 propionic acid Monomer or other reactant All 31 December 2037 0093 79-10-7 147 acrylic acid Monomer or other reactant All (21) 31 December 2034 0094 79-38-9 148 chlorotrifluoroethylene Monomer or other reactant All 0,1 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0095 79-39-0 149 methacrylamide Monomer or other reactant All 0,1 31 December 2034 0096 79-41-4 150 methacrylic acid Monomer or other reactant All (22) 31 December 2034 0097 80-05-7 151 2,2-bis(4-hydroxyphenyl)propane Monomer or other reactant Additive All 2,5 Technical function as additive is only accepted for plastics. 31 December 2028 0098 80-07-9 152 4,4′-dichlorodiphenyl sulfone Monomer or other reactant All 2,5 31 December 2034 0099 80-08-0 153 4,4′-diaminodiphenyl sulfone Monomer or other reactant All 250 31 December 2034 0100 80-09-1 154 4,4′-dihydroxydiphenyl sulfone Monomer or other reactant All 2,5 31 December 2028 0101 80-56-8 155 α-pinene Monomer or other reactant All 31 December 2034 0102 80-62-6 156 methacrylic acid, methyl ester Monomer or other reactant All (22) 31 December 2034 0103 84-74-2 157 phthalic acid, dibutyl ester ('DBP') Additive All 6,0 (31) (35) Only to be used as: 31 December 2028 0104 85-44-9 158 phthalic anhydride Monomer or other reactant Aid to polymerisation All 31 December 2034 0105 85-68-7 159 phthalic acid, benzyl butyl ester ('BBP') Additive All 300 (31) (35) Only to be used as ≤ 5% as sum of all phthalates. 31 December 2028 0106 87-18-3 160 salicylic acid, 4-tert-butylphenyl ester Additive or polymer production aid All 600 For the MTCtap values of degradation products, refer to Table 4. 31 December 2028 0107 87-69-4 161 L-(+)-tartaric acid Monomer or other reactant Polymer production aid Other (processing aid) All 31 December 2034 0108 87-78-5 162 mannitol Monomer or other reactant Polymer production aid All 31 December 2028 0109 88-24-4 163 2,2′-methylene bis(4-ethyl-6-tert-butylphenol) Additive All (13) 31 December 2034 0110 88-68-6 164 2-aminobenzamide Additive or polymer production aid Plastics 2,5 Only for use in PET. 31 December 2034 0111 88-99-3 165 o-phthalic acid Monomer or other reactant All 31 December 2034 0112 89-32-7 166 pyromellitic anhydride Monomer or other reactant All 2,5 – expressed as the sum of pyromellitic anhydride and pyromellitc acid 31 December 2034 0113 91-08-7 167 2,6-toluene diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0114 91-76-9 168 2,4-diamino-6-phenyl-1,3,5- triazine Monomer or other reactant All 250 31 December 2034 0115 91-97-4 169 3,3′-dimethyl–4,4′-diisocyanato biphenyl Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0116 92-88-6 170 4,4′-dihydroxybiphenyl Monomer or other reactant All 300 31 December 2034 0117 93-58-3 171 benzoic acid, methyl ester Additive or polymer production aid All 31 December 2034 0118 93-89-0 172 benzoic acid, ethyl ester Additive or polymer production aid All 31 December 2034 0119 94-13-3 173 4-hydroxybenzoic acid, propyl ester Additive or polymer production aid All 31 December 2034 0120 95-48-7 174 o-cresol Monomer or other reactant All 31 December 2034 0121 96-05-9 175 methacrylic acid, allyl ester Monomer or other reactant All 2,5 31 December 2034 0122 96-33-3 176 acrylic acid, methyl ester Monomer or other reactant All (21) 31 December 2034 0123 96-49-1 177 ethylene carbonate Monomer or other reactant All 1500 - expressed as ethyleneglycol 31 December 2034 0124 96-69-5 178 4,4′-thiobis(6-tert-butyl-3-methyl phenol) Additive All 24 31 December 2034 0125 97-23-4 179 2,2′-dihydroxy–5,5′-dichlorodiphenylmethane Additive or polymer production aid All 600 31 December 2028 0126 97-53-0 180 eugenol Monomer or other reactant All (32) 31 December 2034 0127 97-63-2 181 methacrylic acid, ethyl ester Monomer or other reactant All (22) 31 December 2034 0128 97-65-4 182 itaconic acid Monomer or other reactant Polymer production aid Other (processing aid) All 31 December 2034 0129 97-86-9 183 methacrylic acid, isobutyl ester Monomer or other reactant All (22) 31 December 2034 0130 97-88-1 184 methacrylic acid, butyl ester Monomer or other reactant All (22) 31 December 2034 0131 97-90-5 185 methacrylic acid, diester with ethyleneglycol Monomer or other reactant All 2,5 31 December 2034 0132 98-54-4 186 4-tert-butylphenol Monomer or other reactant All 2,5 31 December 2028 0133 98-83-9 187 α-methylstyrene Monomer or other reactant All 2,5 31 December 2034 0134 99-63-8 188 isophthalic acid dichloride Monomer or other reactant All (26) 31 December 2034 0135 99-76-3 189 4-hydroxybenzoic acid, methyl ester Additive or polymer production aid All 31 December 2034 0136 99-96-7 190 p-hydroxybenzoic acid Monomer or other reactant Polymer production aid Other (processing aid) All 31 December 2034 0137 100-20-9 191 terephthalic acid dichloride Monomer or other reactant All (27) 31 December 2034 0138 192 phthalic acid Monomer or other reactant Additive All (27) 31 December 2034 0139 100-42-5 193 styrene Monomer or other reactant All 31 December 2028 0140 100-51-6 194 benzyl alcohol Monomer or other reactant Additive Polymer production aid All 31 December 2034 0141 100-52-7 195 benzaldehyde Additive or polymer production aid All There is a risk that the migration of the substance deteriorates the organoleptic characteristics of the drinking water and then, that the product does not comply with Commission Implementing Decision (EU) 2024/368. 31 December 2034 0142 100-97-0 196 hexamethylenetetramine Monomer or other reactant Aid to polymerisation All (15) 31 December 2034 0143 101-43-9 197 methacrylic acid, cyclohexyl ester Monomer or other reactant All 2,5 31 December 2034 0144 101-68-8 198 diphenylmethane–4,4′-diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0145 101-90-6 199 resorcinol diglycidyl ether Monomer or other reactant All 0,1 For indirect water contact only, behind a PET layer. Verification of compliance by residual content per water contact surface area (QMA); QMA = 0,0083 dm-1. 31 December 2028 0146 102-08-9 200 N,N′-diphenylthiourea Additive or polymer production aid All 150 31 December 2034 0147 102-09-0 201 diphenyl carbonate Monomer or other reactant All 2,5 31 December 2034 0148 102-39-6 202 (1,3-phenylenedioxy)diacetic acid Monomer or other reactant All 2,5 31 December 2028 0149 102-40-9 203 1,3-bis(2-hydroxyethoxy)benzene Monomer or other reactant All 2,5 31 December 2034 0150 102-60-3 204 N,N,N′,N′-tetrakis(2-hydroxypropyl)ethylenediamine Monomer or other reactant Additive or polymer production aid All 31 December 2034 0151 103-11-7 206 acrylic acid, 2-ethylhexyl ester Monomer or other reactant All 2,5 31 December 2034 0152 103-23-1 207 adipic acid, bis(2-ethylhexyl) ester Additive All 900 (31) 31 December 2034 0153 103-90-2 208 N-(4-hydroxyphenyl) acetamide Monomer or other reactant All 2,5 31 December 2034 0154 104-76-7 209 2-ethyl-1-hexanol Monomer or other reactant All 1500 31 December 2034 0155 105-08-8 210 1,4-bis(hydroxymethyl)cyclohexane Monomer or other reactant All 31 December 2034 0156 105-38-4 211 propionic acid, vinyl ester Monomer or other reactant All (1) 31 December 2034 0157 105-60-2 212 caprolactam Monomer or other reactant Additive Aid to polymerisation All (4) When used for coatings, only for hot curing coatings. 31 December 2034 0158 105-62-4 213 1,2-propyleneglycol dioleate Additive or polymer production aid All 31 December 2028 0159 106-14-9 214 12-hydroxystearic acid Monomer or other reactant Additive Other (processing aid) All 31 December 2034 0160 106-31-0 215 butyric anhydride Monomer or other reactant All 31 December 2034 0161 106-44-5 216 p-cresol Monomer or other reactant All 31 December 2034 0162 106-46-7 217 1,4-dichlorobenzene Monomer or other reactant All 600 31 December 2028 0163 106-63-8 218 acrylic acid, isobutyl ester Monomer or other reactant All (21) 31 December 2034 0164 106-89-8 219 epichlorohydrin Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2028 0165 106-91-2 220 methacrylic acid, 2,3-epoxypropyl ester Monomer or other reactant All 1,0 Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2028 0166 106-97-8 221 butane Additive or polymer production aid All 31 December 2034 0167 106-98-9 222 1-butene Monomer or other reactant All 31 December 2034 0168 106-99-0 223 butadiene Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2028 0169 107-13-1 225 acrylonitrile Monomer or other reactant All 0,1 31 December 2028 0170 107-15-3 226 ethylenediamine Monomer or other reactant Polymer production aid All 600 31 December 2034 0171 107-21-1 227 ethyleneglycol Monomer or other reactant All (2) 31 December 2034 0172 107-92-6 229 butyric acid Monomer or other reactant All 31 December 2037 0173 108-01-0 230 dimethylaminoethanol Monomer or other reactant All 900 31 December 2034 0174 108-05-4 231 acetic acid, vinyl ester Monomer or other reactant All 600 31 December 2028 0175 108-24-7 232 acetic anhydride Monomer or other reactant Additive Polymer production aid All 31 December 2034 0176 108-30-5 233 succinic anhydride Monomer or other reactant All 31 December 2034 0177 108-31-6 234 maleic anhydride Monomer or other reactant Additive Polymer production aid Other (processing aid) All (3) 31 December 2034 0178 108-39-4 235 m-cresol Monomer or other reactant All 31 December 2034 0179 108-45-2 236 1,3-phenylenediamine Monomer or other reactant All 0,1 A detection limit of 0,1 μg/l applies. 31 December 2028 0180 108-46-3 237 1,3-dihydroxybenzene (resorcinol) Monomer or other reactant Other (processing aid) All 120 31 December 2034 0181 108-55-4 238 glutaric anhydride Monomer or other reactant Other (processing aid) All 31 December 2034 0182 108-78-1 239 2,4,6-triamino-1,3,5-triazine (melamine) Monomer or other reactant All 125 31 December 2028 0183 108-91-8 240 cyclohexylamine Monomer or other reactant Aid to polymerisation All 31 December 2028 0184 108-95-2 241 phenol Monomer or other reactant All 150 31 December 2028 0185 109-43-3 242 sebacic acid, dibutyl ester Additive Polymer production aid All (31) 31 December 2034 0186 109-53-5 243 isobutyl vinyl ether Monomer or other reactant All 2,5 Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034 0187 109-66-0 244 pentane Additive or polymer production aid All 31 December 2034 0188 109-67-1 245 1-pentene Monomer or other reactant All 250 31 December 2034 0189 109-99-9 246 tetrahydrofuran Monomer or other reactant Polymer production aid All 30 31 December 2028 0190 110-15-6 247 succinic acid Monomer or other reactant Other (processing aid) All 31 December 2037 0191 110-16-7 248 maleic acid Monomer or other reactant Other (processing aid) All (3) 31 December 2034 0192 110-17-8 249 fumaric acid Monomer or other reactant Other (processing aid) All 31 December 2034 0193 110-30-5 250 N,N′-ethylenebisstearamide Additive Polymer production aid All 31 December 2034 0194 110-31-6 251 N,N′-ethylenebisoleamide Additive or polymer production aid All 31 December 2034 0195 110-44-1 252 sorbic acid Additive or polymer production aid All 31 December 2034 0196 110-60-1 253 1,4-diaminobutane Monomer or other reactant All 31 December 2034 0197 110-63-4 254 1,4-butanediol Monomer or other reactant Additive All (29) 31 December 2034 0198 110-88-3 255 trioxane Monomer or other reactant All 250 31 December 2034 0199 110-94-1 256 glutaric acid Monomer or other reactant Other (processing aid) All 31 December 2037 0200 111-06-8 258 palmitic acid, butyl ester Additive or polymer production aid All 31 December 2028 0201 111-14-8 259 heptanoic acid Additive or polymer production aid All 31 December 2034 0202 111-20-6 260 sebacic acid Monomer or other reactant Additive Other (processing aid) All 31 December 2034 0203 111-40-0 261 diethylenetriamine Monomer or other reactant All 250 31 December 2034 0204 111-41-1 262 N-(2-aminoethyl)ethanolamine Additive or polymer production aid All 2,5 For indirect water contact only, behind a PET layer. 31 December 2028 0205 111-46-6 263 diethyleneglycol Monomer or other reactant Aid to polymerisation All (2) 31 December 2034 0206 111-66-0 264 1-octene Monomer or other reactant All 750 31 December 2034 0207 111-87-5 265 1-octanol Monomer or other reactant All 31 December 2034 0208 112-27-6 266 triethyleneglycol Monomer or other reactant Additive Other (processing aid) All 31 December 2034 0209 112-30-1 267 1-decanol Monomer or other reactant All 31 December 2034 0210 112-41-4 268 1-dodecene Monomer or other reactant All 2,5 31 December 2034 0211 112-60-7 269 tetraethyleneglycol Monomer or other reactant All 31 December 2034 0212 112-80-1 270 oleic acid Monomer or other reactant Additive Other (processing aid) All 31 December 2028 0213 112-84-5 271 erucamide Polymer production aid Other (processing aid) All 31 December 2034 0214 112-85-6 272 behenic acid Monomer or other reactant All 31 December 2037 0215 112-86-7 273 erucic acid Monomer or other reactant Other (processing aid) All 31 December 2028 0216 112-96-9 274 octadecyl isocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0217 115-07-1 275 propylene Monomer or other reactant All 31 December 2034 0218 115-11-7 276 isobutene Monomer or other reactant All 31 December 2034 0219 115-27-5 277 hexachloroendomethylenetetrahydrophthalic anhydride Monomer or other reactant Other (processing aid) All 0,1 31 December 2034 0220 115-28-6 278 hexachloroendomethylenetetrahydrophthalic acid Monomer or other reactant Other (processing aid) All 0,1 31 December 2028 0221 115-77-5 279 pentaerythritol Monomer or other reactant Additive All 31 December 2034 0222 115-96-8 280 phosphoric acid, trichloroethyl ester Additive or polymer production aid All 0,1 31 December 2028 0223 116-14-3 281 tetrafluoroethylene Monomer or other reactant All 2,5 When used for coatings, only as monomer for polymeric additives. 31 December 2028 0224 116-15-4 282 hexafluoropropylene Monomer or other reactant All 0,1 (38) 31 December 2028 0225 117-81-7 283 phthalic acid, bis(2-ethylhexyl) ester ('DEHP') Additive Polymer production aid All 30 (31) (35) Only to be used as: 31 December 2028 0226 119-36-8 284 salicylic acid, methyl ester Additive or polymer production aid All 1500 31 December 2028 0227 119-47-1 285 2,2′-methylene bis(4-methyl-6-tert-butylphenol) Additive All (13) 31 December 2028 0228 119-61-9 286 benzophenone Aid to polymerisation All 30 31 December 2028 0229 120-47-8 287 4-hydroxybenzoic acid, ethyl ester Additive or polymer production aid All 31 December 2034 0230 120-61-6 288 terephthalic acid, dimethyl ester Monomer or other reactant All 31 December 2034 0231 120-80-9 289 1,2-dihydroxybenzene Monomer or other reactant All 300 31 December 2028 0232 121-79-9 290 gallic acid, propyl ester Additive All (19) 31 December 2034 0233 121-91-5 291 isophthalic acid Monomer or other reactant Other (processing aid) All (26) 31 December 2034 0234 122-20-3 292 triisopropanolamine Monomer or other reactant Aid to polymerisation All 250 31 December 2034 0235 122-52-1 293 phosphorous acid, triethyl ester Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2034 0236 123-28-4 294 thiodipropionic acid, didodecyl ester Additive or polymer production aid All (14) 31 December 2034 0237 123-31-9 295 1,4-dihydroxybenzene Monomer or other reactant All 30 31 December 2028 0238 123-38-6 296 propionaldehyde Monomer or other reactant All 31 December 2034 0239 123-62-6 297 propionic anhydride Monomer or other reactant All 31 December 2034 0240 123-72-8 298 butyraldehyde Monomer or other reactant All 31 December 2034 0241 123-76-2 299 levulinic acid Additive or polymer production aid All 31 December 2037 0242 123-86-4 300 acetic acid, butyl ester Polymer production aid All 31 December 2034 0243 123-95-5 301 stearic acid, butyl ester Additive All 31 December 2028 0244 123-99-9 302 azelaic acid Monomer or other reactant All 31 December 2034 0245 124-04-9 303 adipic acid Monomer or other reactant All 31 December 2034 0246 124-07-2 304 caprylic acid Monomer or other reactant All 31 December 2037 0247 124-09-4 305 hexamethylenediamine Monomer or other reactant All 120 31 December 2034 0248 124-26-5 306 stearamide Other (processing aid) All 31 December 2034 0249 124-38-9 307 carbon dioxide Additive or polymer production aid All 31 December 2037 0250 126-13-6 308 sucrose acetate isobutyrate Additive or polymer production aid All 31 December 2028 0251 126-14-7 309 sucrose octaacetate Additive or polymer production aid All 31 December 2028 0252 126-30-7 310 2,2-dimethyl–1,3-propanediol (neopentylglycol) Monomer or other reactant All 2,5 - expressed as mono and diethylene glycols 31 December 2034 0253 126-58-9 311 dipentaerythritol Monomer or other reactant All 31 December 2034 0254 126-98-7 312 methacrylonitrile Monomer or other reactant All 0,1 31 December 2034 0255 127-63-9 313 diphenyl sulfone Monomer or other reactant All 150 31 December 2034 0256 127-91-3 314 β-pinene Monomer or other reactant All 31 December 2028 0257 128-37-0 315 2,6-di-tert-butyl-p-cresol Additive Polymer production aid All 150 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0258 131-17-9 316 phthalic acid, diallyl ester Monomer or other reactant All 0,1 31 December 2034 0259 131-53-3 317 2,2′-dihydroxy-4-methoxybenzophenone Additive or polymer production aid All (8) 31 December 2034 0260 131-56-6 318 2,4-dihydroxybenzophenone Aid to polymerisation All (8) 31 December 2034 0261 131-57-7 319 2-hydroxy-4-methoxybenzophenone Additive or polymer production aid All (8) 31 December 2034 0262 136-60-7 320 benzoic acid, butyl ester Additive or polymer production aid All 31 December 2034 0263 137-66-6 321 ascorbyl palmitate Additive or polymer production aid All 31 December 2034 0264 140-88-5 323 acrylic acid, ethyl ester Monomer or other reactant All (21) 31 December 2034 0265 141-22-0 324 ricinoleic acid Monomer or other reactant All 2100 31 December 2028 0266 141-32-2 325 acrylic acid, n-butyl ester Monomer or other reactant All, except rubber (21) 31 December 2034 0267 141-43-5 326 2-aminoethanol Monomer or other reactant All 2,5 For indirect water contact only, behind a PET layer, except when used for coatings. 31 December 2034 0268 141-78-6 327 acetic acid, ethyl ester Additive All 31 December 2034 0269 141-82-2 328 malonic acid Monomer or other reactant Other (processing aid) All 31 December 2034 0270 142-62-1 329 hexanoic acid Monomer or other reactant All 31 December 2037 0271 143-07-7 330 lauric acid Monomer or other reactant Additive Polymer production aid Other (processing aid) All 31 December 2037 0272 143-08-8 331 1-nonanol Monomer or other reactant All 31 December 2034 0273 143-28-2 332 oleyl alcohol Monomer or other reactant Additive Polymer production aid All 31 December 2034 0274 144-62-7 333 oxalic acid Monomer or other reactant Other (processing aid) All 300 31 December 2034 0275 151-56-4 334 ethyleneimine Monomer or other reactant All 0,1 31 December 2028 0276 301-02-0 335 oleamide Additive Polymer production aid Other (processing aid) All 31 December 2028 0277 334-48-5 336 n-decanoic acid Monomer or other reactant Additive Other (processing aid) All 31 December 2037 0278 345-92-6 337 4,4′-difluorobenzophenone Monomer or other reactant All 2,5 31 December 2034 0279 373-49-9 338 palmitoleic acid Monomer or other reactant All 31 December 2037 0280 409-21-2 339 silicon carbide Monomer or other reactant Additive All 31 December 2028 0281 461-58-5 340 dicyanodiamide Monomer or other reactant All 3000 31 December 2034 0282 498-66-8 341 bicyclo[2.2.1]hept-2-ene Monomer or other reactant All 2,5 31 December 2034 0283 502-44-3 342 caprolactone Monomer or other reactant All (28) 31 December 2034 0284 504-63-2 343 1,3-propanediol Monomer or other reactant All 2,5 31 December 2034 0285 505-65-7 344 1,4-butanediol formal Monomer or other reactant All 2,5 (15) (29) 31 December 2034 0286 506-30-9 345 arachidic acid Monomer or other reactant All 31 December 2037 0287 514-10-3 346 abietic acid Monomer or other reactant All 31 December 2028 0288 528-44-9 347 trimellitic acid Monomer or other reactant All (20) 31 December 2028 0289 544-63-8 348 myristic acid Monomer or other reactant Polymer production aid Other (processing aid) All 31 December 2028 0290 552-30-7 349 trimellitic anhydride Monomer or other reactant All (20) 31 December 2034 0291 557-59-5 350 lignoceric acid Monomer or other reactant All 31 December 2028 0292 563-45-1 351 3-methyl-1-butene Monomer or other reactant Plastics 0,1 Only to be used in polypropylene. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0293 576-26-1 352 2,6-dimethylphenol Monomer or other reactant All 2,5 31 December 2034 0294 584-09-8 353 carbonic acid, rubidium salt Additive or polymer production aid All 600 31 December 2028 0295 584-84-9 354 2,4-toluene diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0296 585-07-9 355 methacrylic acid, tert-butyl ester Monomer or other reactant All (22) 31 December 2034 0297 592-41-6 356 1-hexene Monomer or other reactant All 150 31 December 2034 0298 599-64-4 358 4-cumylphenol Monomer or other reactant All 2,5 31 December 2034 0299 611-99-4 359 4,4′-dihydroxybenzophenone Aid to polymerisation All (8) 31 December 2034 0300 620-67-7 360 glycerol triheptanoate Additive or polymer production aid All 31 December 2034 0301 629-11-8 361 1,6-hexanediol Monomer or other reactant All 2,5 31 December 2034 0302 630-08-0 362 carbon monoxide Monomer or other reactant All 31 December 2028 0303 646-06-0 363 1,3-dioxolane Monomer or other reactant All 250 31 December 2034 0304 689-12-3 365 acrylic acid, isopropyl ester Monomer or other reactant All (21) 31 December 2028 0305 691-37-2 366 4-methyl-1-pentene Monomer or other reactant All 2,5 31 December 2034 0306 693-23-2 367 n-dodecanedioic acid Monomer or other reactant Other (processing aid) All 31 December 2034 0307 693-36-7 368 thiodipropionic acid, dioctadecyl ester Additive or polymer production aid All (14) 31 December 2034 0308 693-57-2 369 12-aminododecanoic acid Monomer or other reactant All 2,5 31 December 2034 0309 760-93-0 370 methacrylic anhydride Monomer or other reactant All (22) 31 December 2034 0310 818-61-1 371 acrylic acid, monoester with ethyleneglycol Monomer or other reactant All (21) 31 December 2034 0311 822-06-0 372 hexamethylene diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0312 840-65-3 373 2,6-naphthalenedicarboxylic acid, dimethyl ester Monomer or other reactant All 2,5 31 December 2034 0313 868-77-9 374 methacrylic acid, monoester with ethyleneglycol Monomer or other reactant All (22) 31 December 2034 0314 872-05-9 375 1-decene Monomer or other reactant All 2,5 31 December 2034 0315 872-50-4 376 N-methylpyrrolidone Additive or polymer production aid All 3000 31 December 2028 0316 919-30-2 377 3-aminopropyltriethoxysilane Additive Polymer production aid All 2,5 Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler when used for the reactive surface treatment of inorganic fillers. MTCtap = 2,5 μg/l when used for the surface treatment of materials and products. 31 December 2034 0317 923-02-4 378 N-methylolmethacrylamide Monomer or other reactant All 2,5 31 December 2034 0318 924-42-5 379 N-methylolacrylamide Monomer or other reactant All 0,1 31 December 2028 0319 925-60-0 380 acrylic acid, propyl ester Monomer or other reactant All (21) 31 December 2028 0320 931-88-4 381 cyclooctene Monomer or other reactant All 2,5 31 December 2028 0321 947-04-6 382 laurolactam Monomer or other reactant All 250 31 December 2034 0322 948-65-2 383 2-phenylindole Additive or polymer production aid All 750 31 December 2028 0323 991-84-4 384 2,4-bis(octylmercapto)-6-(4- hydroxy–3,5-di-tert-butylanilino)-1,3,5-triazine Additive All 1500 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0324 999-61-1 385 acrylic acid, 2-hydroxypropyl ester Monomer or other reactant All 2,5 - expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxyisopropyl ester It may contain up to 25 % (w/w) of acrylic acid, 2-hydroxyisopropyl ester (CAS No. 2918-23-2). Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0325 1034-01-1 386 gallic acid, octyl ester Additive All (19) 31 December 2028 0326 1072-63-5 387 1-vinylimidazole Monomer or other reactant All 2,5 31 December 2028 0327 1120-36-1 388 1-tetradecene Monomer or other reactant All 2,5 31 December 2034 0328 1141-38-4 389 2,6-naphthalenedicarboxylic acid Monomer or other reactant All 250 31 December 2034 0329 1166-52-5 390 gallic acid, dodecyl ester Additive All (19) 31 December 2028 0330 1187-93-5 391 perfluoromethyl perfluorovinyl ether Monomer or other reactant Plastics, coatings, rubber 0,1 (38) Only to be used in: -fluoro- and perfluoropolymers intended for products with a CF (S/V ratio) of ≤ 0,0067 dm-1. 31 December 2028 0331 1241-94-7 392 phosphoric acid, diphenyl 2-ethylhexyl ester Additive All 120 31 December 2034 0332 1302-78-9 393 bentonite Additive Polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0333 1305-62-0 394 calcium hydroxide Additive Polymer production aid Aid to polymerisation All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0334 1305-78-8 395 calcium oxide Additive Aid to polymerisation All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0335 1309-42-8 396 magnesium hydroxide Additive All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0336 1309-48-4 397 magnesium oxide Additive Aid to polymerisation All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0337 1309-64-4 398 antimony trioxide Additive or polymer production aid All For antimony, refer to Annex V. 31 December 2028 0338 1310-58-3 399 potassium hydroxide Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0339 1310-73-2 400 sodium hydroxide Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0340 1313-82-2 401 sodium sulfide Monomer or other reactant All 31 December 2034 0341 1314-13-2 402 zinc oxide Additive Aid to polymerisation All For zinc, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0342 1314-98-3 403 zinc sulfide Polymer production aid Additive All For zinc, refer to Annex V. 31 December 2034 0343 1317-33-5 404 molybdenum disulfide Additive or polymer production aid All 31 December 2028 0344 1321-74-0 405 divinylbenzene Monomer or other reactant All 0,1 - expressed as the sum of divinylbenzene and ethylvinylbenzene It may contain up to 45 % (w/w) of ethylvinylbenzene. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0345 1323-39-3 406 1,2-propyleneglycol monostearate Additive or polymer production aid All 31 December 2034 0346 1330-80-9 408 1,2-propyleneglycol monooleate Additive or polymer production aid All 31 December 2037 0347 1332-58-7 410 kaolin Additive All Particles can be thinner than 100 nm only if incorporated at a quantity of less than 12 % w/w in an ethylene vinyl alcohol copolymer (EVOH) inner layer of a multi-layer structure, in which the layer in direct contact with the drinking water provides a functional barrier preventing migration of particles into the water. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0348 1333-86-4 411 carbon black Additive All Polycyclic aromatic hydrocarbons MTCtap = 0,1 μg/l Primary particles of 10 – 300 nm which are aggregated to a size of 100 – 1200 nm which may form agglomerates within the size distribution of 300 nm – mm. Toluene extractables: maximum 0,1 %, determined according to ISO method 6209. UV absorption of cyclohexane extract at 386 nm: < 0,02 AU for a 1 cm cell or < 0,1 AU for a 5 cm cell, determined according to a generally recognised method of analysis. Benzo(a)pyrene content: max 0,25 mg/kg carbon black. Maximum use level of carbon black in plastics: 2,5 % w/w. 31 December 2034 0349 1335-23-5 412 copper iodide Additive or polymer production aid All (6) For copper, refer to Annex V. 31 December 2028 0350 1336-21-6 413 ammonium hydroxide Additive Polymer production aid All For ammonium, refer to Annex V. 31 December 2034 0351 1338-39-2 414 sorbitan monolaurate Additive or polymer production aid All 31 December 2034 0352 1338-41-6 415 sorbitan monostearate Additive or polymer production aid All 31 December 2034 0353 1338-43-8 416 sorbitan monooleate Additive Polymer production aid All 31 December 2037 0354 1343-98-2 417 silicic acid Monomer or other reactant Additive Polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0355 1344-28-1 418 aluminium oxide Additive Polymer production aid All For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0356 1401-55-4 419 tannic acids Additive or polymer production aid All According to the JECFA specifications. 31 December 2034 0357 1459-93-4 420 isophthalic acid, dimethyl ester Monomer or other reactant All 2,5 31 December 2034 0358 1477-55-0 421 1,3-benzenedimethanamine Monomer or other reactant All (33) 31 December 2034 0359 1533-45-5 422 4,4′-bis(2-benzoxazolyl)stilbene Additive or polymer production aid All 2,5 31 December 2034 0360 1623-05-8 423 perfluoropropylperfluorovinyl ether Monomer or other reactant All 2,5 (38) 31 December 2028 0361 1647-16-1 424 1,9-decadiene Monomer or other reactant All 2,5 31 December 2028 0362 1663-39-4 425 acrylic acid, tert-butyl ester Monomer or other reactant All (21) 31 December 2034 0363 1675-54-3 426 2,2-bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether Monomer or other reactant (resin) All 450 - expressed as BADGE and its hydrolysis products BADGE chlorohydrins MTCtap = 50 μg/l bisphenol-A MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0,1 μg/l (49) In compliance with Commission Regulation (EC) No 1895/2005 (OJ L 302, 19.11.2005, p. 28.). 31 December 2034 0364 1679-51-2 427 4-(hydroxymethyl)-1-cyclohexene Monomer or other reactant All 2,5 31 December 2028 0365 1709-70-2 428 1,3,5-trimethyl-2,4,6-tris(3,5-di- tert-butyl-4-hydroxybenzyl)benzene Additive All For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0366 1761-71-3 429 bis(4-aminocyclohexyl)methane Monomer or other reactant All 2,5 31 December 2034 0367 1843-03-4 430 1,1,3-tris(2-methyl-4-hydroxy-5- tert-butylphenyl) butane Additive or polymer production aid All 250 31 December 2034 0368 1843-05-6 431 2-hydroxy-4-n-octyloxybenzophenone Additive Polymer production aid All (8) 31 December 2034 0369 2035-75-8 432 adipic anhydride Monomer or other reactant All 31 December 2028 0370 2082-79-3 433 octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate Additive Polymer production aid All 300 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0371 2082-81-7 434 methacrylic acid, diester with 1,4-butanediol Monomer or other reactant All 2,5 31 December 2034 0372 2123-24-2 435 caprolactam, sodium salt Monomer or other reactant All (4) 31 December 2034 0373 2146-71-6 436 lauric acid, vinyl ester Monomer or other reactant All 31 December 2034 0374 2156-97-0 437 acrylic acid, dodecyl ester All 2,5 31 December 2034 0375 2162-74-5 438 bis(2,6-diisopropylphenyl) carbodiimide Monomer or other reactant All 2,5 - expressed as the sum of bis(2,6-diisopropylphenyl)carbodiimide and its hydrolysis product 2,6-diisopropylaniline 31 December 2037 0376 2177-70-0 439 methacrylic acid, phenyl ester Monomer or other reactant All (22) 31 December 2034 0377 2210-28-8 440 methacrylic acid, propyl ester Monomer or other reactant All (22) 31 December 2028 0378 2315-68-6 441 benzoic acid, propyl ester Additive or polymer production aid All 31 December 2028 0379 2425-79-8 442 1,4-butanediol bis(2,3-epoxypropyl)ether Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product expressed as epoxy group. Molecular weight of epoxy group is 43 Da. Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034 0380 2432-99-7 443 11-aminoundecanoic acid Monomer or other reactant All 250 31 December 2034 0381 2440-22-4 444 2-(2′-hydroxy-5′-methylphenyl)benzotriazole Additive or polymer production aid All (12) 31 December 2034 0382 2466-09-3 445 pyrophosphoric acid Monomer or other reactant Polymer production aid All 31 December 2028 0383 2495-35-4 446 acrylic acid, benzyl ester Monomer or other reactant All (21) 31 December 2034 0384 2495-37-6 447 methacrylic acid, benzyl ester Monomer or other reactant All (22) 31 December 2034 0385 2499-59-4 448 acrylic acid, n-octyl ester Monomer or other reactant All (21) 31 December 2028 0386 2500-88-1 449 dioctadecyl disulfide Additive or polymer production aid All 2,5 31 December 2034 0387 2561-88-8 450 sebacic anhydride Monomer or other reactant Other (processing aid) All 31 December 2028 0388 2682-20-4 451 2-methyl-4-isothiazolin-3-one Additive Polymer production aid All 25 Only to be used in aqueous polymer dispersions and emulsions. 31 December 2034 0389 2725-22-6 452 2,4-bis(2,4-dimethylphenyl)-6-(2- hydroxy-4-n-octyloxyphenyl)-1,3,5-triazine Additive or polymer production aid All 250 31 December 2034 0390 2768-02-7 453 vinyltrimethoxysilane Additive Other (processing aid) All 2,5 Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0391 2855-13-2 454 1-amino-3-aminomethyl-3,5,5- trimethylcyclohexane Monomer or other reactant All 300 31 December 2034 0392 2867-47-2 455 methacrylic acid, 2-(dimethylamino)-ethyl ester Monomer or other reactant All 0,1 31 December 2034 0393 2998-08-5 456 acrylic acid, sec-butyl ester Monomer or other reactant All (21) 31 December 2028 0394 2998-18-7 457 methacrylic acid, sec-butyl ester Monomer or other reactant All (22) 31 December 2028 0395 3061-75-4 458 behenamide Additive or polymer production aid All 31 December 2034 0396 3135-18-0 459 3,5-di-tert-butyl-4-hydroxybenzyl-phosphonic acid, dioctadecyl ester Additive or polymer production aid All For the MTCtap values of degradation products, refer to Table 4. 31 December 2028 0397 3173-53-3 460 cyclohexyl isocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0398 3173-72-6 461 1,5-naphthalene diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0399 3195-78-6 462 N-vinyl-N-methylacetamide Monomer or other reactant All 1,0 31 December 2034 0400 3290-92-4 463 1,1,1-trimethylolpropane trimethacrylate Aid to polymerisation All 2,5 31 December 2034 0401 3293-97-8 464 2-hydroxy-4-n-hexyloxybenzophenone Additive or polymer production aid All (8) 31 December 2028 0402 3333-62-8 465 7-[2H-naphtho-(1,2-D)triazol-2-yl]-3-phenylcoumarin Additive All Requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0403 3648-18-8 466 di-n-octyltin dilaurate Additive Polymer production aid All (10) 31 December 2028 0404 3825-26-1 468 perfluorooctanoic acid, ammonium salt Additive or polymer production aid All (38) (39) Only to be used in repeated use articles, sintered at high temperatures. 31 December 2028 0405 3864-99-1 469 2-(2′-hydroxy–3,5′-di-tert-butylphenyl)-5-chlorobenzotriazole Additive Polymer production aid All For the MTCtap values of degradation products, refer to Table 4. (12) 31 December 2028 0406 3896-11-5 470 2-(2′-hydroxy-3′-tert-butyl-5′-methylphenyl)-5-chlorobenzotriazole Additive or polymer production aid All (12) 31 December 2034 0407 3965-55-7 471 5-sulfoisophthalic acid, monosodium salt, dimethyl ester Monomer or other reactant All 2,5 31 December 2034 0408 4066-02-8 472 2,2′-methylenebis(4-methyl-6-cyclohexylphenol) Additive All (5) 31 December 2034 0409 4074-90-2 473 adipic acid, divinyl ester Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 5 mg/kg in the product. Only to be used as co-monomer. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0410 4098-71-9 475 1-isocyanato-3-isocyanatomethyl- 3,5,5-trimethylcyclohexane Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0411 4128-73-8 476 diphenylether–4,4′-diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0412 4130-42-1 477 2,6-di-tert-butyl-4-ethylphenol Polymer production aid Other (processing aid) All 240 For the MTCtap values of degradation products, refer to Table 4. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0413 4191-73-5 478 4-hydroxybenzoic acid, isopropyl ester Additive or polymer production aid All 31 December 2034 0414 4196-95-6 479 azelaic anhydride Monomer or other reactant All 31 December 2028 0415 4221-80-1 480 3,5-di-tert-butyl-4-hydroxybenzoic acid, 2,4-di-tert-butylphenyl ester Additive or polymer production aid All For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0416 4422-95-1 481 1,3,5-benzenetricarboxylic acid trichloride Monomer or other reactant All 2,5 - expressed as 1,3,5-benzenetricarboxylic acid 31 December 2037 0417 4655-34-9 482 methacrylic acid, isopropyl ester Monomer or other reactant All (22) 31 December 2028 0418 4724-48-5 483 n-octylphosphonic acid Additive or polymer production aid All 2,5 31 December 2034 0419 4767-03-7 484 2,2-bis(hydroxymethyl)propionic acid Monomer or other reactant All 2,5 Verification of compliance by residual content per drinking water contact surface area (QMA) pending the availability of an analytical method. When used for coatings, only as monomer for polymeric additives. 31 December 2034 0420 5124-30-1 485 dicyclohexylmethane–4,4′-diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0421 5136-44-7 486 ethylene-N-palmitamide-N′-stearamide Additive or polymer production aid All 31 December 2028 0422 5232-99-5 487 2-cyano–3,3-diphenylacrylic acid, ethyl ester Additive Polymer production aid All 2,5 31 December 2034 0423 5518-18-3 488 N,N′-ethylenebispalmitamide Additive or polymer production aid All 31 December 2028 0424 5873-54-1 490 diphenylmethane–2,4′-diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0425 6182-11-2 491 1,2-propyleneglycol distearate Additive or polymer production aid All 31 December 2028 0426 6197-30-4 492 2-cyano–3,3-diphenylacrylic acid, 2-ethylhexyl ester Additive or polymer production aid All 2,5 31 December 2034 0427 6200-40-4 493 bis(2-hydroxyethyl)-2-hydroxypropyl-3-(dodecyloxy)methylammonium chloride Additive or polymer production aid All 90 31 December 2028 0428 6303-21-5 494 hypophosphorous acid Additive Polymer production aid All 31 December 2034 0429 6642-31-5 495 6-amino–1,3-dimethyluracil Additive or polymer production aid All 250 31 December 2034 0430 6683-19-8 496 pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] Additive Polymer production aid All For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0431 6846-50-0 497 2,2,4-trimethyl–1,3-pentanediol diisobutyrate Additive Polymer production aid Coatings 250 Only to be used in coatings. 31 December 2034 0432 6864-37-5 498 3,3′-dimethyl–4,4′-diaminodicyclohexylmethane Monomer or other reactant Plastics 2,5 Only to be used in polyamides. 31 December 2034 0433 6915-15-7 499 malic acid Monomer or other reactant Other (processing aid) All In case of use as a monomer only to be used as a co-monomer in aliphatic polyesters up to maximum level of 1 % on a molar basis, except when used for coatings. 31 December 2034 0434 7128-64-5 500 2,5-bis(5-tert-butyl-2-benzoxazolyl)thiophene Additive Polymer production aid All 30 Requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex 1 of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0435 7456-68-0 502 4,4′-oxybis(benzenesulfonyl azide) Monomer or other reactant All 2,5 31 December 2034 0436 7585-39-9 503 β-dextrin Additive or polymer production aid All 31 December 2034 0437 7631-90-5 505 sodium bisulfite Additive or polymer production aid All (18) 31 December 2034 0438 7632-00-0 506 sodium nitrite Additive or polymer production aid All 30 31 December 2034 0439 7647-01-0 507 hydrochloric acid Additive or polymer production aid Other (processing aid) All 31 December 2034 0440 7647-15-6 508 sodium bromide Additive or polymer production aid All 31 December 2034 0441 7664-38-2 509 phosphoric acid Monomer or other reactant Polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0442 7664-41-7 510 ammonia Monomer or other reactant Other (processing aid) All For ammonium, refer to Annex V. 31 December 2037 0443 7681-11-0 512 potassium iodide Additive or polymer production aid All (6) 31 December 2034 0444 7681-82-5 513 sodium iodide Additive or polymer production aid All (6) 31 December 2034 0445 7757-83-7 516 sodium sulfite Additive or polymer production aid All (18) If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0446 7758-02-3 517 potassium bromide Additive or polymer production aid All 31 December 2034 0447 7782-42-5 521 graphite Additive All Polycyclic aromatic hydrocarbons MTCtap = 0,1 μg/l Graphites according to EUPL Number 2039, Annex IV. 31 December 2034 0448 7782-50-5 522 chlorine Monomer or other reactant All 31 December 2034 0449 7787-70-4 523 copper bromide Additive or polymer production aid All (6) For copper, refer to Annex V. 31 December 2034 0450 8001-22-7 524 soybean oil Monomer or other reactant Other (processing aid) All 31 December 2028 0451 8001-39-6 525 Japan wax Additive or polymer production aid All 31 December 2028 0452 8001-75-0 526 ceresin Additive or polymer production aid All 31 December 2028 0453 8001-79-4 527 castor oil Monomer or other reactant (base oil) All 31 December 2028 0454 8002-43-5 528 lecithin Additive Polymer production aid Other (processing aid) All 31 December 2037 0455 8002-53-7 529 montan wax Additive Polymer production aid All 31 December 2034 0456 8006-44-8 530 candelilla wax Additive or polymer production aid All 31 December 2028 0457 8012-89-3 531 beeswax Additive or polymer production aid All 31 December 2037 0458 8013-07-8 532 soybean oil, epoxidised Monomer or other reactant Other (processing aid) All 1500 (31) Oxirane < 8 %, iodine number < 6. 31 December 2034 0459 8015-86-9 533 carnauba wax Additive Polymer production aid Other (processing aid) All 31 December 2028 0460 8017-16-1 534 polyphosphoric acids Monomer or other reactant Additive Polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0461 8050-09-7 535 rosin Monomer or other reactant Additive Polymer production aid Other (processing aid) All 31 December 2034 0462 8050-15-5 536 rosin, hydrogenated, ester with methanol Additive All, except rubber 31 December 2034 0463 8050-26-8 537 rosin, ester with pentaerythritol Additive or polymer production aid All 31 December 2034 0464 8050-31-5 538 rosin, ester with glycerol Other (processing aid) All 31 December 2034 0465 8052-10-6 539 rosin tall oil Monomer or other reactant Other (processing aid) All 31 December 2028 0466 8062-15-5 540 lignosulfonic acid Additive or polymer production aid Plastics 12 Only to be used as dispersant for plastics dispersions. 31 December 2028 0467 9000-01-5 541 gum arabic Additive or polymer production aid All 31 December 2028 0468 9000-11-7 542 carboxymethylcellulose Additive or polymer production aid All 31 December 2028 0469 9000-16-2 543 dammar Additive or polymer production aid All 31 December 2028 0470 9000-30-0 544 guar gum Additive or polymer production aid All 31 December 2037 0471 9000-65-1 545 tragacanth gum Additive or polymer production aid All 31 December 2037 0472 9000-69-5 546 pectin Additive or polymer production aid All 31 December 2037 0473 9000-70-8 547 gelatin Additive or polymer production aid All 31 December 2028 0474 9000-71-9 548 casein Additive or polymer production aid All 31 December 2028 0475 9002-88-4 549 polyethylene wax Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) All 31 December 2034 0476 9003-07-0 550 polypropylene wax Polymer production aid Other (processing aid) All 31 December 2034 0477 9003-39-8 552 polyvinylpyrrolidone Monomer or other reactant All The substance shall meet the purity criteria as laid down in Commission Directive 2008/84/EC. 31 December 2037 0478 9004-34-6 553 cellulose Monomer or other reactant Additive All 31 December 2037 0479 9004-36-8 554 cellulose acetate butyrate Additive or polymer production aid All 31 December 2028 0480 9004-57-3 555 ethylcellulose Monomer or other reactant Additive All 31 December 2028 0481 9004-58-4 556 ethylhydroxyethylcellulose Additive or polymer production aid All 31 December 2028 0482 9004-59-5 557 methylethylcellulose Additive or polymer production aid All 31 December 2028 0483 9004-62-0 558 hydroxyethylcellulose Additive Polymer production aid All 31 December 2028 0484 9004-64-2 559 hydroxypropylcellulose Additive or polymer production aid All 31 December 2028 0485 9004-65-3 560 methylhydroxypropylcellulose Additive or polymer production aid All 31 December 2028 0486 9004-67-5 561 methylcellulose Polymer production aid Additive All 31 December 2028 0487 9004-70-0 562 nitrocellulose Monomer or other reactant All 31 December 2028 0488 9004-97-1 563 polyethyleneglycol monoricinoleate Additive or polymer production aid All 2100 31 December 2028 0489 9005-25-8 564 starch, edible Monomer or other reactant All 31 December 2028 0490 9005-27-0 565 hydroxyethyl starch Additive or polymer production aid All 31 December 2028 0491 9005-32-7 566 alginic acid Additive or polymer production aid All 31 December 2037 0492 9005-37-2 567 1,2-propyleneglycol alginate Additive or polymer production aid All 31 December 2028 0493 9005-64-5 568 polyethyleneglycol sorbitan monolaurate Other (processing aid) All 31 December 2034 0494 9005-65-6 569 polyethyleneglycol sorbitan monooleate Other (processing aid) All 31 December 2034 0495 9005-66-7 570 polyethyleneglycol sorbitan monopalmitate Additive or polymer production aid All 31 December 2034 0496 9005-67-8 571 polyethyleneglycol sorbitan monostearate Other (processing aid) All 31 December 2034 0497 9005-70-3 572 polyethyleneglycol sorbitan trioleate Additive or polymer production aid All 31 December 2037 0498 9005-71-4 573 polyethyleneglycol sorbitan tristearate Additive or polymer production aid All 31 December 2037 0499 9006-04-6 574 rubber, natural Monomer or other reactant Additive All At recovery and coagulation of the natural rubber, ammonia, formic acid, acetic acid and sodium bisulfite may be used. Other additives of the natural rubber must be listed in the positive list. 31 December 2028 0500 9032-42-2 576 hydroxyethylmethylcellulose Additive or polymer production aid All 31 December 2028 0501 9044-17-1 577 isobutylene-butene copolymer Additive or polymer production aid All 31 December 2037 0502 9046-01-9 578 polyethyleneglycol tridecyl ether phosphate Additive or polymer production aid All 250 Polyethyleneglycol (EO < 11) tridecyl ether phosphate (mono-and dialkyl ester) with a maximum 10 % content of polyethyleneglycol (EO < 11) tridecylether. 31 December 2028 0503 9049-76-7 579 hydroxypropyl starch Additive or polymer production aid All 31 December 2028 0504 10016-20-3 580 α-dextrin Additive or polymer production aid All 31 December 2037 0505 10022-31-8 581 barium nitrate Additive or polymer production aid All For barium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0506 10039-33-5 582 di-n-octyltin bis(2-ethylhexyl maleate) Additive or polymer production aid All (10) 31 December 2034 0507 10043-11-5 583 boron nitride Additive All For boron, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0508 10043-35-3 584 boric acid Monomer or other reactant Additive All For boron, refer to Annex V. 31 December 2028 0509 10094-45-8 587 octadecylerucamide Additive or polymer production aid All 250 31 December 2034 0510 10436-08-5 589 cis-11-eicosenamide Additive or polymer production aid All 31 December 2028 0511 10595-80-9 590 methacrylic acid, 2-sulfoethyl ester Monomer or other reactant All 0,1 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0512 10605-09-1 591 ascorbyl stearate Additive or polymer production aid All 31 December 2028 0513 11097-59-9 592 aluminium magnesium carbonate hydroxide Additive All For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0514 11132-73-3 595 lignocellulose Monomer or other reactant All 31 December 2028 0515 11138-66-2 596 xanthan gum Additive Polymer production aid All 31 December 2037 0516 12001-26-2 597 mica Additive All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0517 12007-55-5 599 barium tetraborate Additive or polymer production aid All For barium and boron, refer to Annex V. 31 December 2028 0518 12072-90-1 600 hydromagnesite Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0519 12124-97-9 601 ammonium bromide Additive or polymer production aid All For ammonium, refer to Annex V. 31 December 2028 0520 12198-93-5 602 ozokerite Additive or polymer production aid All 31 December 2028 0521 12269-78-2 603 pyrophyllite Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0522 12304-65-3 604 hydrotalcite Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0523 12542-30-2 605 acrylic acid, dicyclopentenyl ester Monomer or other reactant All 2,5 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0524 13003-12-8 608 4,4′-butylidene-bis(6-tert-butyl-3- methylphenyl-ditridecyl phosphite) Additive or polymer production aid All 300 31 December 2034 0525 13445-56-2 609 pyrophosphorous acid Additive or polymer production aid All 31 December 2028 0526 13560-49-1 611 3-aminocrotonic acid, diester with thiobis (2-hydroxyethyl) ether Additive or polymer production aid All 31 December 2028 0527 13811-50-2 612 N,N′-divinyl-2-imidazolidinone Monomer or other reactant All 2,5 Verification of compliance by residual content per water contact surface area (QMA) in case of reaction with water. 31 December 2034 0528 13983-17-0 613 wollastonite Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0529 14464-46-1 614 cristobalite Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0530 14807-96-6 615 talc Additive Polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0531 14808-60-7 616 quartz Additive Polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0532 15214-89-8 617 2-acrylamido-2-methylpropanesul phonic acid Monomer or other reactant All 2,5 31 December 2034 0533 15535-79-2 618 di-n-octyltin mercaptoacetate Aid to polymerisation All (10) 31 December 2034 0534 15571-58-1 619 di-n-octyltin bis(2-ethylhexyl mercaptoacetate) Aid to polymerisation All (10) 31 December 2028 0535 15571-60-5 620 di-n-octyltin dimaleate Additive or polymer production aid All (10) 31 December 2028 0536 16219-75-3 621 5-ethylidenebicyclo[2,2,1]hept-2-ene Monomer or other reactant All 2,5 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of analytical method for migration testing. It can only be used for products with a CF (S/V ratio) of ≤ 2dm-1. 31 December 2034 0537 16260-09-6 622 oleylpalmitamide Additive or polymer production aid All 250 31 December 2034 0538 16389-88-1 623 dolomite Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0539 16712-64-4 624 6-hydroxy-2-naphthalenecarboxylic acid Monomer or other reactant All 2,5 31 December 2034 0540 18641-57-1 626 glycerol tribehenate Additive or polymer production aid All 31 December 2028 0541 19569-21-2 627 huntite Additive or polymer production aid All 31 December 2028 0542 20427-58-1 628 zinc hydroxide Additive or polymer production aid All For zinc, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0543 21645-51-2 629 aluminium hydroxide Additive All For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0544 22788-19-8 630 1,2-propyleneglycol dilaurate Additive or polymer production aid All 31 December 2028 0545 23128-74-7 631 1,6-hexamethylene-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionamide) Additive Polymer production aid All 2250 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0546 23676-09-7 632 4-ethoxybenzoic acid, ethyl ester Additive or polymer production aid All 180 31 December 2028 0547 23949-66-8 633 2-ethoxy-2′-ethyloxanilide Additive or polymer production aid All 1500 31 December 2034 0548 24800-44-0 634 tripropyleneglycol Monomer or other reactant All 31 December 2034 0549 25134-51-4 636 acrylic acid, acrylic acid, 2-ethylhexyl ester, copolymer Additive or polymer production aid All 2,5 - expressed as acrylic acid, 2-ethylhexyl ester (21) 31 December 2037 0550 25151-96-6 637 pentaerythritol dioleate Additive or polymer production aid All 2,5 31 December 2034 0551 25322-69-4 639 polypropyleneglycol Monomer or other reactant Aid to polymerisation All 31 December 2034 0552 25359-91-5 640 formaldehyde-1-naphthol, copolymer Additive or polymer production aid All 2,5 31 December 2034 0553 25736-61-2 642 maleic anhydride-styrene, copolymer, sodium salt Additive or polymer production aid All The fraction with molecular weight below 1000 Da shall not exceed 0,05 % (w/w). 31 December 2037 0554 26266-57-9 643 sorbitan monopalmitate Additive Polymer production aid All 31 December 2034 0555 26266-58-0 644 sorbitan trioleate Additive or polymer production aid All 31 December 2034 0556 26401-86-5 645 mono-n-octyltin tris(isooctyl mercaptoacetate) Additive or polymer production aid All (11) 31 December 2034 0557 26401-97-8 646 di-n-octyltin bis(isooctyl mercaptoacetate) Additive or polymer production aid All (10) 31 December 2034 0558 26402-23-3 647 glycerol monohexanoate Additive or polymer production aid All 31 December 2028 0559 26402-26-6 648 glycerol monooctanoate Additive or polymer production aid All 31 December 2034 0560 26427-07-6 649 dibutylthiostannoic acid polymer Additive or polymer production aid All Molecular unit = (C8H18S3Sn2)n (n = 1,5-2). 31 December 2034 0561 26636-01-1 650 dimethyltin bis(isooctyl mercaptoacetate) Additive or polymer production aid All (9) 31 December 2028 0562 26658-19-5 651 sorbitan tristearate Additive or polymer production aid All 31 December 2034 0563 26741-53-7 652 bis(2,4-di-tert-butylphenyl) pentaerythritol diphosphite Additive or polymer production aid All 30 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0564 26747-90-0 653 2,4-toluene diisocyanate dimer Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0565 26836-47-5 654 sorbitol monostearate Additive or polymer production aid All 31 December 2028 0566 26896-48-0 655 tricyclodecanedimethanol Monomer or other reactant All 2,5 31 December 2034 0567 26914-43-2 656 styrenesulfonic acid Monomer or other reactant All 2,5 31 December 2028 0568 27107-89-7 657 mono-n-octyltin tris(2-ethylhexyl mercaptoacetate) Aid to polymerisation All (11) 31 December 2034 0569 27176-87-0 658 dodecylbenzenesulfonic acid Monomer or other reactant All 1500 31 December 2034 0570 27194-74-7 659 1,2-propyleneglycol monolaurate Additive or polymer production aid All 31 December 2034 0571 27458-90-8 660 di-tert-dodecyl disulfide Additive or polymer production aid All 2,5 31 December 2034 0572 27676-62-6 661 1,3,5-tris(3,5-di-tert-butyl-4-hydroxybenzyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione Additive or polymer production aid All 250 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0573 27955-94-8 662 1,1,1-tris(4-hydroxyphenol)ethane Monomer or other reactant Plastics 0,25 Only to be used in polycarbonates, except when used for coatings. 31 December 2034 0574 28290-79-1 663 linolenic acid Monomer or other reactant All 31 December 2028 0575 28931-67-1 664 trimethylolpropane trimethacrylate-methyl methacrylate copolymer Additive or polymer production aid All 31 December 2037 0576 29013-28-3 665 1,2-propyleneglycol monopalmitate Additive or polymer production aid All 31 December 2028 0577 29116-98-1 666 sorbitan dioleate Additive or polymer production aid All 31 December 2028 0578 29204-02-2 667 gadoleic acid Monomer or other reactant Other (processing aid) All 31 December 2028 0579 29894-35-7 668 polyglycerol ricinoleate Additive or polymer production aid All 31 December 2037 0580 30233-64-8 669 glycerol monobehenate Additive or polymer production aid All 31 December 2034 0581 30899-62-8 670 glycerol monolaurate diacetate Additive or polymer production aid All (31) 31 December 2034 0582 31570-04-4 671 phosphorous acid, tris(2,4-di-tert-butylphenyl)ester Additive Polymer production aid All For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0583 31831-53-5 672 polyester of 1,4-butanediol with caprolactone Additive or polymer production aid All (28) (29) The fraction with molecular weight below 1000 Da shall not exceed 0,5 % (w/w). 31 December 2034 0584 32509-66-3 673 ethylene glycol bis[3,3-bis(3-tert-butyl-4-hydroxyphenyl)butyrate] Additive or polymer production aid All 300 31 December 2034 0585 32647-67-9 674 dibenzylidene sorbitol Additive or polymer production aid All 31 December 2034 0586 32687-78-8 675 N,N′-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionyl)hydrazide Additive All 750 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0587 33568-99-9 676 di-n-octyltin bis(isooctyl maleate) Additive or polymer production aid All (10) 31 December 2028 0588 33587-20-1 677 1,2-propyleneglycol dipalmitate Additive or polymer production aid All 31 December 2028 0589 35074-77-2 678 1,6-hexamethylene-bis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) Additive All 300 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0590 35958-30-6 679 1,1-bis(2-hydroxy–3,5-di-tert-butylphenyl)ethane Additive or polymer production aid All 250 31 December 2028 0591 36443-68-2 680 triethyleneglycol bis[3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionate] Additive or polymer production aid All 450 31 December 2034 0592 36653-82-4 681 1-hexadecanol Monomer or other reactant All 31 December 2034 0593 37205-99-5 682 ethylcarboxymethylcellulose Additive or polymer production aid All 31 December 2028 0594 37206-01-2 683 methylcarboxymethylcellulose Additive or polymer production aid All 31 December 2028 0595 37244-96-5 684 nepheline syenite Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0596 37296-97-2 685 silicic acid, magnesium-sodium-fluoride salt Additive All For fluoride, refer to Annex V. Only to be used in multi-layer materials for layers not coming into direct contact with drinking water, ecxept when used for coatings. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0597 37353-59-6 686 hydroxymethylcellulose Additive or polymer production aid All 31 December 2028 0598 38103-06-9 687 2,2-bis(4-hydroxyphenyl)propane bis(phthalic anhydride) Monomer or other reactant All 2,5 31 December 2034 0599 38613-77-3 688 tetrakis(2,4-di-tert-butyl-phenyl)-4,4′-biphenylylene diphosphonite Additive Polymer production aid All 900 31 December 2028 0600 40601-76-1 689 1,3,5-tris(4-tert-butyl-3-hydroxy-2,6-dimethylbenzyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione Additive or polymer production aid All 300 31 December 2034 0601 41484-35-9 690 thiodiethanol bis(3-(3,5-di-tert-butyl-4-hydroxy phenyl)propionate) Additive All 120 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0602 47465-97-4 691 3,3-bis(3-methyl-4-hydroxyphenyl)2-indolinone Monomer or other reactant All 90 31 December 2028 0603 52047-59-3 692 2-(4-dodecylphenyl)indole Additive or polymer production aid All 3,0 31 December 2028 0604 54140-20-4 693 sorbitan tripalmitate Additive or polymer production aid All 31 December 2028 0605 54276-35-6 694 methacrylic acid, sulfopropyl ester Monomer or other reactant All 2,5 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0606 54849-38-6 695 monomethyltin tris(isooctyl mercaptoacetate) Additive or polymer production aid All (9) 31 December 2028 0607 57569-40-1 696 terephthalic acid, diester with 2,2′-methylenebis(4-methyl-6-tert-butylphenol) Additive or polymer production aid All (13) 31 December 2028 0608 57583-34-3 697 monomethyltin tris(ethylhexyl mercaptoacetate) Additive or polymer production aid All (9) 31 December 2028 0609 57583-35-4 698 dimethyltin bis(ethylhexyl mercaptoacetate) Additive or polymer production aid All (9) 31 December 2028 0610 58446-52-9 699 stearoylbenzoylmethane Additive or polymer production aid All 31 December 2028 0611 61167-58-6 700 acrylic acid, 2-tert-butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl ester Additive or polymer production aid All 300 31 December 2034 0612 61269-61-2 701 N,N′-bis(2,2,6,6-tetramethyl-4-piperidyl)hexamethylenediamine-1,2-dibromoethane, copolymer Additive or polymer production aid All 120 31 December 2037 0613 61752-68-9 702 sorbitan tetrastearate Additive or polymer production aid All 31 December 2028 0614 61788-47-4 703 fatty acids, coco Monomer or other reactant Other (processing aid) All 31 December 2028 0615 61788-85-0 704 polyethyleneglycol ester of hydrogenated castor oil Additive Polymer production aid Other (processing aid) All 31 December 2034 0616 61788-89-4 705 acids, fatty, unsaturated (C18), dimers, non hydrogenated, distilled and non-distilled Monomer or other reactant Other (processing aid) All (17) Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0617 61790-12-3 706 fatty acids, tall oil Monomer or other reactant All 31 December 2028 0618 61790-53-2 707 diatomaceous earth Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0619 61791-12-6 708 polyethyleneglycol ester of castor oil Additive Polymer production aid Other (processing aid) All 2100 31 December 2034 0620 62568-11-0 709 sorbitan monobehenate Additive or polymer production aid All 31 December 2028 0621 63397-60-4 710 bis(2-carbobutoxyethyl)tin-bis(isooctyl mercaptoacetate) Additive or polymer production aid All 900 31 December 2028 0622 63438-80-2 711 (2-carbobutoxyethyl)tin-tris(isooctyl mercaptoacetate) Additive or polymer production aid All 1500 31 December 2028 0623 64147-40-6 712 castor oil, dehydrated Monomer or other reactant (base oil) All 31 December 2034 0624 64365-11-3 7440-44-0 713 charcoal, activated Additive or polymer production aid Plastics Only for use in PET at maximum 10 mg/kg of polymer. Same purity requirements as for Vegetable Carbon (E 153) set out by Commission Regulation (EU) No 231/2012 with exception of ash content which can be up to 10 % (w/w). 31 December 2028 0625 64365-17-9 714 rosin, hydrogenated, ester with pentaerythritol Additive or polymer production aid All 31 December 2034 0626 65140-91-2 715 3,5-di-tert-butyl-4-hydroxybenzyl phosphonic acid, monoethyl ester, calcium salt Additive or polymer production aid All 300 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0627 65447-77-0 716 1-(2-hydroxyethyl)-4-hydroxy-2,2,6,6-tetramethyl piperidine-succinic acid, dimethyl ester, copolymer Additive or polymer production aid All 1500 31 December 2037 0628 65997-06-0 717 rosin, hydrogenated Additive All, except rubber 31 December 2034 0629 65997-13-9 718 rosin, hydrogenated, ester with glycerol Additive or polymer production aid All 31 December 2034 0630 66822-60-4 719 N-methacryloyloxyethyl-N,N-dimethyl-N-carboxymethyl-ammonium chloride, sodium salt-octadecyl methacrylate-ethyl methacrylate-cyclohexyl methacrylate-N-vinyl-2-pyrrolidone, copolymers Additive or polymer production aid All 31 December 2037 0631 67649-65-4 720 mono-n-dodecyltin tris(isooctyl mercaptoacetate) Additive or polymer production aid All (24) 31 December 2028 0632 67845-93-6 721 3,5-di-tert-butyl-4-hydroxybenzoic acid, hexadecyl ester Additive or polymer production aid All For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0633 68308-53-2 722 fatty acids, soya Monomer or other reactant (base oil) All 31 December 2028 0634 68412-29-3 723 starch, hydrolysed Additive or polymer production aid All 31 December 2028 0635 68425-17-2 724 syrups, hydrolysed starch, hydrogenated Monomer or other reactant All In compliance with the purity criteria for maltitol syrup E 965(ii) as laid down in Commission Directive 2008/60/EC. 31 December 2034 0636 68442-12-6 726 Reaction products of oleic acid, 2-mercaptoethyl ester, with dichlorodimethyltin, sodium sulfide and trichloromethyltin Additive or polymer production aid All (9) 31 December 2028 0637 68442-85-3 727 cellulose, regenerated Monomer or other reactant Additive All 31 December 2028 0638 68515-49-1 26761-40-0 729 phthalic acid, diesters with primary, saturated C9-C11 alcohols more than 90 % C10 (DNIP) Additive Polymer production aid All (25) (31) Only to be used as: Not to be used in combination substances with EUPL Numbers 0103, 0105, 0225 or Diisobutyl phthalate (synonyms 1,2-bis(2-methylpropyl) benzene–1,2-dicarboxylate or DIBP) with CAS Number 84-69-5. 31 December 2037 0639 68554-70-1 730 methylsilsesquioxane Monomer or other reactant (base oil) Additive Polymer production aid All Residual monomer in methylsilsesquioxane: < 1 mg methyltrimethoxysilane/kg of methylsilsesquioxane. 31 December 2028 0640 68564-88-5 731 N-heptylaminoundecanoic acid Monomer or other reactant All 2,5 31 December 2034 0641 68610-51-5 732 p-cresol-dicyclopentadiene-isobutylene, copolymer Additive (polymeric) All 250 31 December 2034 0642 68783-41-5 733 acids, fatty, unsaturated (C18), dimers, hydrogenated, distilled and non-distilled Monomer or other reactant Other (processing aid) All (17) Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0643 68951-50-8 735 bis(polyethyleneglycol)hydroxymethylphosphonate Additive or polymer production aid All 30 31 December 2028 0644 69226-44-4 736 di-n-octyltin ethyleneglycol bis(mercaptoacetate) Additive or polymer production aid All (10) 31 December 2037 0645 70142-34-6 737 polyethyleneglycol-30 dipolyhydroxystearate Additive or polymer production aid All 31 December 2034 0646 70321-86-7 738 2-[2-hydroxy–3,5-bis(1,1-dimethylbenzyl)phenyl]benzotriazole Additive or polymer production aid All 75 31 December 2034 0647 70331-94-1 739 2,2′-oxamidobis[ethyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] Additive or polymer production aid All For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0648 71878-19-8 740 poly[6-[(1,1,3,3-tetramethyl-butyl)amino]-1,3,5-triazine–2,4-diyl]-[(2,2,6,6-tetramethyl-4-piperidyl)-imino]hexamethylene[(2,2,6,6-tetramethyl-4-piperidyl) imino] Additive Polymer production aid All 150 31 December 2028 0649 78301-43-6 742 2,2,4,4-tetramethyl-20-(2,3-epoxy propyl)-7-oxa–3,20-diazadispiro-[5.1.11.2]-heneicosan-21-one, polymer Additive or polymer production aid All 250 31 December 2037 0650 79072-96-1 743 bis(4-ethylbenzylidene)sorbitol Additive or polymer production aid All 31 December 2034 0651 80181-31-3 744 3-hydroxybutanoic acid-3-hydroxypentanoic acid, copolymer Monomer or other reactant All (34) The substance is used as product obtained by bacterial fermentation. In compliance with the specifications mentioned in the Table 4 of Annex I of Commission Regulation (EU) No 10/2011. 31 December 2028 0652 80410-33-9 745 2,2′,2′-nitrilo(triethyl tris(3,3′,5,5′-tetra-tert-butyl-1,1′-bi-phenyl-2,2′-diyl)phosphite) Additive or polymer production aid All 250 - expressed as sum of phosphite and phosphate For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0653 80693-00-1 746 bis(2,6-di-tert-butyl-4-methylphenyl)pentaerythritol diphosphite Additive or polymer production aid All 250 - expressed as sum of phosphite and phosphate For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0654 84030-61-5 747 di-n-dodecyltin bis(isooctyl mercaptoacetate) Additive or polymer production aid All (24) 31 December 2028 0655 84434-12-8 748 N-(2-aminoethyl)-β-alanine, sodium salt Monomer or other reactant All 2,5 31 December 2028 0656 85209-91-2 749 2,2′-methylene bis(4,6-di-tert-butylphenyl) sodium phosphate Additive or polymer production aid All 250 For the MTCtap values of degradation products, refer to Table 4. 31 December 2034 0657 85209-93-4 750 2,2′-methylenebis(4,6-di-tert-butylphenyl) lithium phosphate Additive or polymer production aid All 250 For lithium, refer to Annex V. 31 December 2028 0658 87189-25-1 751 poly(zinc glycerolate) Additive or polymer production aid All For zinc, refer to Annex V. 31 December 2034 0659 87826-41-3 69158-41-4 54686-97-4 81541-12-0 752 bis(methylbenzylidene)sorbitol Additive or polymer production aid All 31 December 2037 0660 92704-41-1 753 kaolin, calcined Additive All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0661 99880-64-5 754 glycerol dibehenate Additive or polymer production aid All 31 December 2028 0662 106246-33-7 755 4,4′-methylenebis(3-chloro–2,6-diethylaniline) Monomer or other reactant All 2,5 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0663 110553-27-0 756 2,4-bis(octylthiomethyl)-6-methyllphenol Additive All (23) 31 December 2034 0664 110638-71-6 757 vermiculite, reaction product with citric acid, lithium salt Additive or polymer production aid All For lithium, refer to Annex V. 31 December 2034 0665 110675-26-8 758 2,4-bis(dodecylthiomethyl)-6-methylphenol Additive or polymer production aid All (23) 31 December 2034 0666 118337-09-0 759 2,2′-ethylidenebis(4,6-di-tert-butylphenyl) fluorophosphonite Additive or polymer production aid All 300 31 December 2037 0667 119345-01-6 760 Reaction product of di-tert-butylphosphonite with biphenyl, obtained by condensation of 2,4-di-tert-butylphenol with Friedel Craft reaction product of phosphorous trichloride and biphenyl Additive or polymer production aid All 900 For the MTCtap values of degradation products, refer to Table 4. Composition: Quantity of substance used/ quantity of formulation. Other specifications: 31 December 2034 0668 120218-34-0 761 thiodiethanolbis(5-methoxycarbonyl–2,6-dimethyl–1,4-dihydropyridine-3-carboxylate) Additive or polymer production aid All 300 31 December 2037 0669 123968-25-2 762 acrylic acid, 2,4-di-tert-pentyl-6-(1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl)phenyl ester Additive or polymer production aid All 250 31 December 2034 0670 129228-21-3 763 3,3-bis(methoxymethyl)–2,5-dimethylhexane Additive or polymer production aid All 2,5 31 December 2034 0671 132459-54-2 764 N,N′-bis[4-(ethoxycarbonyl)phenyl]-1,4,5,8-naphthalenetetracarboxydiimide Monomer or other reactant Plastics 2,5 Purity > 98,1 % (w/w). Only to be used as co-monomer (max 4 %) for polyesters (PET, PBT). 31 December 2028 0672 134701-20-5 765 2,4-dimethyl-6-(1-methylpentadecyl)phenol Additive or polymer production aid All 50 31 December 2034 0673 135861-56-2 766 bis(3,4-dimethylbenzylidene)sorbitol Additive or polymer production aid All 31 December 2034 0674 136504-96-6 767 1,2-bis(3-aminopropyl)ethylene diamine, polymer with N-butyl-2,2,6,6-tetramethyl-4-piperidinamine and 2,4,6-trichloro-1,3,5-triazine Additive or polymer production aid All 250 31 December 2034 0675 143925-92-2 768 amines, bis(hydrogenated tallow alkyl) oxidised Additive or polymer production aid Plastics Only to be used in: Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2034 0676 145650-60-8 769 phosphorous acid, bis(2,4-di-tert-butyl-6-methylphenyl) ethyl ester Additive or polymer production aid All 250 - expressed as sum of phosphite and phosphate 31 December 2034 0677 147315-50-2 770 2-(4,6-diphenyl-1,3,5-triazin-2-yl)-5-(hexyloxy)phenol Additive or polymer production aid All 2,5 31 December 2034 0678 151841-65-5 771 aluminium hydroxybis [2,2′-methylenebis (4,6-di-tert-butylphenyl) phosphate] Additive or polymer production aid All 250 For the MTCtap values of degradation products, refer to Table 4. For aluminium, refer to Annex V. 31 December 2034 0679 153250-52-3 772 N,N′-dicyclohexyl-2,6-naphthalene dicarboxamide Additive or polymer production aid All 250 31 December 2028 0680 154862-43-8 773 bis(2,4-dicumylphenyl)pentaerythritol-diphosphite Additive or polymer production aid All 250 - expressed as sum of the substance itself, its oxidised form bis(2,4-dicumylphenyl)pentaerythritol-phosphate and its hydrolysis product (2,4-dicumylphenol) 31 December 2034 0681 161717-32-4 774 2,4,6-tris(tert-butyl)phenyl-2-butyl-2-ethyl-1,3-propanediol phosphite Additive or polymer production aid All 100 - expressed as sum of phosphite, phosphate and the hydrolysis product = TTBP 31 December 2034 0682 166412-78-8 775 1,2-cyclohexanedicarboxylic acid, diisononyl ester Additive Polymer production aid All (31) 31 December 2034 0683 167883-16-1 776 polydimethylsiloxane, 3-aminopropyl terminated, polymer with dicyclohexylmethane–4,4′- diisocyanate Additive or polymer production aid All The fraction with molecular weight below 1000 Da shall not exceed 1,5 % (w/w). 31 December 2034 0684 174254-23-0 777 acrylic acid, methyl ester, telomer with 1-dodecanethiol, C16-C18 alkyl esters Additive or polymer production aid All 0,5 % in the product. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 0685 178671-58-4 778 pentaerythritol tetrakis (2-cyano–3,3-diphenylacrylate) Additive or polymer production aid All 2,5 31 December 2034 0686 182121-12-6 779 9,9-bis(methoxymethyl)fluorene Additive or polymer production aid All 2,5 31 December 2034 0687 192268-64-7 780 poly-[[6-[N-(2,2,6,6-tetramethyl- 4-piperidinyl)-n-butylamino]-1,3,5-triazine-2,4-diyl][(2,2,6,6-tetramethyl-4-piperidinyl)imino]-1,6-hexanediyl[(2,2,6,6-tetramethyl-4-piperidinyl)imino]]-α-[N,N,N′,N′-tetrabutyl-N"-(2,2,6,6-tetramethyl-4-piperidinyl)-N"-[6-(2,2,6,6-tetramethyl-4-piperidinylamino)-hexyl]-[1,3,5-triazine-2,4,6-triamine]-ω-N,N,N′,N′-tetrabutyl-1,3,5-triazine-2,4-diamine] Additive or polymer production aid All 250 31 December 2037 0688 227099-60-7 781 1,3,5-tris(4-benzoylphenyl) benzene Additive or polymer production aid All 2,5 31 December 2028 0689 661476-41-1 782 polydimethylsiloxane, 3-aminopropyl terminated, polymer with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane Additive or polymer production aid All The fraction with molecular weight below 1000 Da shall not exceed 1 % (w/w). 31 December 2034 0690 736150-63-3 783 glycerides, castor-oil mono-, hydrogenated, acetates Additive or polymer production aid All (31) 31 December 2034 0691 745070-61-5 784 1,3,5-tris (2,2-di-methylpropanamido) benzene Additive or polymer production aid All 250 31 December 2037 0692 100-21-0 785 terephthalic acid Monomer or other reactant All (27) 31 December 2034 0693 117-21-5 786 3-chlorophthalic anhydride Monomer or other reactant All 2,5 - expressed as 3-chloro-phthalic acid 31 December 2034 0694 118-45-6 787 4-chlorophthalic anhydride Monomer or other reactant All 2,5 - expressed as 4-chloro-phthalic acid 31 December 2034 0695 2530-85-0 788 [3-(methacryloxy)propyl]trimethoxysilane Additive Polymer production aid All 2,5 Only to be used as a surface treatment agent of inorganic fillers. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. Only a method of analysis for the determination of the residual monomer in the treated filler is available. 31 December 2034 0696 106990-43-6 791 N,N′,N″,N″-tetrakis(4,6-bis(N-butyl-(N-methyl-2,2,6,6-tetramethylpiperidin-4-yl)amino)triazin-2-yl)-4,7-diazadecane-1,10-diamine Aid to polymerisation All 2,5 31 December 2034 0697 203255-81-6 792 3,3′,5,5′-tetrakis(tert-butyl)-2,2′-dihydroxybiphenyl, cyclic ester with [3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propyl]oxyphosphonous acid Additive or polymer production aid All 250 - expressed as the sum of phosphite and phosphate form of the substance and the hydrolysis products 31 December 2028 0698 102-71-6 793 triethanolamine Monomer or other reactant Aid to polymerisation Other (processing aid) All (36) 31 December 2034 0699 79-14-1 794 glycolic acid Monomer or other reactant All Only to be used for manufacture of polyglycolic acid (PGA) for (i) indirect water contact behind polyesters such as polyethylene terephthalate (PET) or polylactic acid (PLA); and (ii) direct water contact of a blend of PGA up to 3 % w/w in PET or PLA. 31 December 2037 0700 124172-53-8 795 N,N′-bis(2,2,6,6-tetramethyl-4-piperidyl)-N,N′-diformylhexamethylenediamine Additive or polymer production aid All 2,5 31 December 2034 0701 18600-59-4 796 2,2′-(1,4-phenylene)bis[4H-3,1-benzoxazin-4-one] Additive or polymer production aid All 2,5 - including the sum of its hydrolysis products 31 December 2034 0702 73018-26-5 797 polyester of adipic acid with 1,3-butanediol, 1,2-propanediol and 2-ethyl-1-hexanol Additive or polymer production aid All (30) (31) 31 December 2037 0703 6422-86-2 798 terephthalic acid, bis(2-ethylhexyl)ester Additive or polymer production aid All 3000 (31) 31 December 2034 0704 867-13-0 800 triethyl phosphonoacetate Additive or polymer production aid Plastics Only for use in PET. 31 December 2034 0705 146340-15-0 802 alcohols, C12-C14 secondary, β-(2-hydroxyethoxy), ethoxylated Additive or polymer production aid All 250 31 December 2028 0706 152261-33-1 803 α-alkenes(C20-C24) copolymer with maleic anhydride, reaction product with 4-amino-2,2,6,6-tetramethylpiperidine Additive or polymer production aid All 31 December 2034 0707 1010121-89-7 804 poly(3-nonyl–1,1-dioxo-1-thiopropane–1,3-diyl)-block-poly(x-oleyl-7-hydroxy–1,5-diiminooctane–1,8-diyl), process mixture with x = 1 and/or 5, neutralised with dodecylbenzenesulfonic acid Additive or polymer production aid Plastics Only to be used as polymer production aid in polyethylene (PE), polypropylene (PP) and polystyrene (PS). 31 December 2034 0708 1076-97-7 806 1,4-cyclohexanedicarboxylic acid Monomer or other reactant Plastics 250 Only to be used for manufacture of polyesters. 31 December 2034 0709 807 titanium nitride, nanoparticles Additive or polymer production aid Plastics No migration of titanium nitride nanoparticles. Only to be used in polyethylene terephthalate (PET) up to 20 mg/ kg. In the PET, the agglomerates have a diameter of 100-500 nm consisting of primary titanium nitride nanoparticles; primary particles have a diameter of approximately 20 nm. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0710 882073-43-0 808 bis(4-propylbenzylidene)propylsorbitol Additive or polymer production aid All 250 - including the sum of its hydrolysis products 31 December 2028 0711 852282-89-4 809 N-(2,6-diisopropylphenyl)-6-[4-(1,1,3,3-tetramethylbutyl)phenoxy]-1H-benzo[de]isoquinolin-1,3(2H)-dione Additive or polymer production aid Plastics 2,5 Only for use in PET. 31 December 2028 0712 68441-17-8 811 polyethylene waxes, oxidised Additive Polymer production aid All 3000 31 December 2034 0713 124578-12-7 812 poly(12-hydroxystearic acid)-polyethyleneimine copolymer Additive or polymer production aid Plastics Only to be used in plastics up to 0,1 % w/w. Prepared by the reaction of poly(12-hydroxystearic acid) with polyethyleneimine. 31 December 2037 0714 813 sulfosuccinic acid alkyl (C4-C20) or cyclohexyl diesters, salts Additive Polymer production aid All 250 31 December 2031 0715 814 sulfosuccinic acid monoalkyl (C10-C16) polyethyleneglycol esters, salts Additive or polymer production aid All 100 31 December 2034 0716 816 cis–1,2-cyclohexanedicarboxylic acid, salts Additive or polymer production aid All 250 31 December 2031 0717 817 cis-endo-bicyclo[2.2.1]heptane- 2,3-dicarboxylic acid, salts Additive or polymer production aid All 250 Purity ≥ 96 %. 31 December 2031 0718 818 methallylsulfonic acid, salts Monomer or other reactant All 250 31 December 2031 0719 819 neodecanoic acid, salts Additive or polymer production aid All 2,5 - expressed as neodecanoic acid 31 December 2034 0720 820 pimelic acid, salts Additive or polymer production aid All 31 December 2031 0721 821 stearoyl-2-lactylic acid, salts Additive or polymer production aid All 31 December 2031 0722 822 perchloric acid, salts (perchlorate) Monomer or other reactant All (37) 31 December 2031 0723 823 5-sulfoisophthalic acid, salts Monomer or other reactant All 250 31 December 2031 0724 329238-24-6 854 perfluoro acetic acid, α-substituted with the copolymer of perfluoro–1,2-propylene glycol and perfluoro–1,1-ethylene glycol, terminated with chlorohexafluoropropyloxy groups Additive or polymer production aid Plastics (38) Only to be used in concentrations up to 0,5 % w/w in the polymerisation of fluoropolymers that are processed at temperatures at or above 340 °C. 31 December 2028 0725 855 (butadiene, styrene, methyl methacrylate) copolymer cross-linked with 1,3-butanediol dimethacrylate Additive or polymer production aid Plastics Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 12 %. 31 December 2037 0726 25101-28-4 856 (butadiene, styrene, methyl methacrylate, butyl acrylate) copolymer cross-linked with divinylbenzene or 1,3-butanediol dimethacrylate Additive or polymer production aid Plastics Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 12 %. 31 December 2037 0727 37953-21-2 857 (methyl methacrylate, butyl acrylate, styrene, glycidylmethacrylate) copolymer Additive or polymer production aid Plastics Only to be used in rigid poly(vinyl chloride) (PVC) for cold water applications at a maximum level of 2 %. 31 December 2037 0728 90498-90-1 858 3,9-bis[2-(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]- 2,4,8,10-tetraoxaspiro[5,5]undecane Additive or polymer production aid All 2,5 - expressed as the sum of the substance and its oxidation product 3-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)prop-2-enoyloxy)-1,1-dimethylethyl]-9-[(3-(3-tert-butyl-4-hydroxy-5-methylphenyl)propionyloxy)-1,1-dimethylethyl]-2,4,8,10-tetraoxaspiro[5,5]-undecane in equilibrium with its para quinone methid tautomer 31 December 2037 0729 859 (butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with divinylbenzene, in nanoform Additive or polymer production aid Plastics Only to be used as particles in non-plasticised PVC for cold water applications up to 10 % w/w in contact with water. When used together with the substance with EUPL Number 0761 and/ or the substance with EUPL Number 0767, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 2034 0730 51798-33-5 860 perfluoro[2-(poly(n-propoxy))propanoic acid] Additive or polymer production aid Plastics (38) Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C. 31 December 2028 0731 13252-13-6 861 perfluoro[2-(n-propoxy)propanoic acid] Additive or polymer production aid Plastics (38) Only to be used in the polymerisation of fluoropolymers that are processed at temperatures at or above 265 °C. 31 December 2028 0732 18085-02-4 862 3,4-diacetoxy-1-butene Monomer or other reactant Plastics 2,5 - including the hydrolysis product 3,4-dihydroxy-1-butene Only to be used as a co-monomer for ethylvinylalcohol (EVOH) and polyvinylalcohol (PVOH) copolymers. Only a method for determination of the residual content of the substance in the polymer is available. 31 December 2037 0733 646-25-3 863 1,10-decanediamine Monomer or other reactant Plastics 2,5 Only to be used as a co-monomer for manufacturing polyamide articles for cold water applications. 31 December 2037 0734 56-06-4 864 2,4-diamino-6-hydroxypyrimidine Additive or polymer production aid Plastics 250 Only to be used in rigid poly(vinyl chloride) (PVC). 31 December 2034 0735 25322-99-0 865 (butyl acrylate, methyl methacrylate, butyl methacrylate) copolymer Additive or polymer production aid Plastics Only to be used in: 31 December 2037 0736 866 (butyl acrylate, methyl methacrylate) copolymer, cross-linked with allyl methacrylate Additive or polymer production aid Plastics Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 7 %. 31 December 2034 0737 40471-03-2 867 (butyl methacrylate, ethyl acrylate, methyl methacrylate) copolymer Additive or polymer production aid Plastics Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 2 %. 31 December 2037 0738 9010-88-2 868 (ethyl acrylate, methyl methacrylate) copolymer Additive or polymer production aid Plastics Only to be used in: 31 December 2037 0739 27136-15-8 869 (butyl acrylate, methyl methacrylate, styrene) copolymer Additive or polymer production aid Plastics Only to be used in rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 3 %. 31 December 2034 0740 160535-46-6 870 N,N′,N″-tris(2-methylcyclohexyl)-1,2,3-propane-tricarboxamide Additive or polymer production aid All 250 31 December 2037 0741 6607-41-6 872 2-phenyl–3,3-bis(4-hydroxyphe nyl)phthalimidine Monomer or other reactant Plastics 2,5 To be used only as a co-monomer in polycarbonate copolymers. The substance contains aniline as an impurity; verification of compliance with the restriction set for primary aromatic amines in Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368 is necessary. 31 December 2034 0742 873 titanium dioxide reacted with octyltriethoxysilane Additive or polymer production aid All Reaction product of titanium dioxide with up to 2 % w/w surface treatment substance octyltriethoxysilane, processed at high temperatures. 31 December 2037 0743 156065-00-8 874 α-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyloxy, w-3-dimethyl-3-(4’-hydroxy-3’-methoxyphenyl)propylsilyl polydimethylsiloxane Monomer or other reactant Plastics 2,5 (32) Only to be used as comonomer in siloxane modified polycarbonate. The oligomeric mixture shall be characterised by the formula C24H38Si2O5(SiOC2H6)n (50 > n ≥ 26). 31 December 2037 0744 58128-22-6 875 poly(12-hydroxystearic acid) stearate Additive or polymer production aid All 250 31 December 2037 0745 3010-96-6 881 2,2,4,4-tetramethylcyclobutane–1,3-diol Monomer or other reactant Plastics 250 Only for use as co-monomer at a maximum use level of 35 mole % of the diol component of polyesters. 31 December 2034 0746 2416-94-6 882 2,3,6-trimethylphenol Monomer or other reactant All 2,5 31 December 2034 0747 4457-71-0 883 3-methyl–1,5-pentanediol Monomer or other reactant All 2,5 Only to be used in materials in contact with water at a CF (S/V ratio) of ≤ 0,5 dm-1. 31 December 2034 0748 91082-17-6 884 alkyl(C10-C21)sulfonic acid, esters with phenol Additive Polymer production aid Other (processing aid) All 2,5 31 December 2028 0749 263244-54-8 885 cyclic oligomers of (butylene terephthalate) Additive or polymer production aid Plastics Only to be used in poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), polystyrene (PS) and rigid poly(vinyl chloride) (PVC) plastics in concentrations up to 1 % w/w for cold water applications. 31 December 2034 0750 16545-54-3 894 thiodipropionic acid, ditetradecyl ester Additive or polymer production aid All (14) 31 December 2037 0751 171090-93-0 895 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanoic acid, esters with C13-C15 branched and linear alcohols Additive Polymer production aid Other (processing aid) Plastics, rubber 2,5 For the MTCtap values of degradation products, refer to Table 4. Only to be used in polyolefins. 31 December 2037 0752 958445-44-8 896 3H-perfluoro-3-[(3-methoxy-propoxy)propanoic acid], ammonium salt Additive or polymer production aid Plastics (38) For ammonium, refer to Annex V. Only to be used in the polymerisation of fluoropolymers when: 31 December 2028 0753 37486-69-4 903 2H-perfluoro-[(5,8,11,14-tetra methyl)-tetraethyleneglycol ethyl propyl ether] Polymer production aid Plastics (38) Only to be used as a polymer production aid in the polymerisation of fluoropolymers that are 31 December 2028 0754 120-40-1 923 N,N-bis(2-hydroxyethyl)dodecanamide Additive or polymer production aid All 250 diethanolamine MTCtap = 15 μg/l. 31 December 2037 0755 908020-52-0 926 perfluoro[(2-ethyloxy-ethoxy)acetic acid], ammonium salt Additive or polymer production aid Plastics (38) For ammonium, refer to Annex V. Only to be used in the polymerisation of fluoropolymers that are processed at temperatures higher than 300 °C for at least 10 minutes. 31 December 2028 0756 24937-78-8 969 ethylene-vinyl acetate copolymer wax Additive or polymer production aid Plastics The migration of low molecular weight oligomeric fraction below 1000 Da shall not exceed 250 μg/l. Only to be used as a polymeric additive up to 2 % w/w in polyolefins. 31 December 2034 0757 2459-10-1 971 trimethyl trimellitate Monomer or other reactant Plastics Only to be used as a co-monomer up to 0,35 % w/w to produce modified polyesters. Only a method for determination of the residual content of the substance in the polymer is available. 31 December 2037 0758 19430-93-4 973 (perfluorobutyl)ethylene Monomer or other reactant Plastics (38) Only to be used as a co-monomer up to 0,1 % w/w in the polymerisation of fluoropolymers, sintered at high temperatures. 31 December 2028 0759 979 (polyethylene terephthalate, hydroxylated polybutadiene, pyromellitic anhydride) copolymer Additive or polymer production aid Plastics Only to be used in polyethylene terephthalate (PET) at a maximum level of 5 % w/w. 31 December 2037 0760 3634-83-1 988 1,3-bis(isocyanatomethyl)benzene Monomer or other reactant Plastics (33) To be used only as co-monomer in the manufacture of a middle layer coating on a poly(ethylene terephthalate) polymer film in a multilayer film. 31 December 2034 0761 998 (butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer not cross-linked, in nanoform Additive or polymer production aid Plastics Only to be used as particles in non-plasticised PVC up to 10 % w/w for cold water applications. When used together with the substance with EUPL Number 0729 and/ or the substance with EUPL Number 0767, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 2037 0762 976-56-7 1007 diethyl[[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]phosphonate Additive or polymer production aid Plastics For the MTCtap values of degradation products, refer to Table 4. Only to be used up to 0,2 % (w/w) based on the final polymer weight in the polymerisation process to manufacture poly(ethylene terephthalate) (PET) and poly(ethylene 2,5-furandicarboxylate) (PEF). 31 December 2034 0763 1016 (methacrylic acid, ethyl acrylate, n-butyl acrylate, methyl methacrylate and butadiene) copolymer in nanoform Additive or polymer production aid Plastics Only to be used up to: 31 December 2037 0764 25618-55-7 1017 polyglycerol Additive or polymer production aid All To be processed under conditions preventing the decomposition of the substance and up to a maximum temperature of 275 °C. 31 December 2037 0765 3238-40-2 1031 furan–2,5-dicarboxylic acid Monomer or other reactant Plastics 250 The migration of the oligomeric fraction of less than 1000 Da shall not exceed 2,5 μg/l (expressed as furan–2,5-dicarboxylic acid). Only to be used as a monomer in the production of polyethylene furanoate. A well described method suitable to determine the oligomer migration needs to be provided to the certifying body, as well as sufficient sample for calibration upon request. 31 December 2037 0766 3710-30-3 1034 1,7-octadiene Monomer or other reactant Plastics 2,5 Only to be used as a crosslinking co-monomer in the manufacture of polyolefins for cold water applications. 31 December 2037 0767 1043 (butadiene, ethyl acrylate, methyl methacrylate, styrene) copolymer crosslinked with 1,3-butanediol dimethacrylate, in nanoform Additive or polymer production aid Plastics Only to be used as particles in non-plasticised PVC up to 10 % w/w for cold water applications. When used together with the substance with EUPL Number 0729 and/or the substance with EUPL Number 0761, the restriction of 10 % w/w applies to the sum of those substances. The diameter of particles shall be > 20 nm, and for at least 95 % by number it shall be > 40 nm. 31 December 2034 0768 1190931-27-1 1045 perfluoro{acetic acid, 2-[(5- methoxy–1,3-dioxolan-4-yl)oxy]}, ammonium salt Additive or polymer production aid Plastics (38) For ammonium, refer to Annex V. Only to be used as a polymer production aid during the manufacture of fluoropolymers under high temperature conditions of at least 370 °C. 31 December 2028 0769 624-03-3 1048 ethylene glycol dipalmitate Additive or polymer production aid All (2) Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils. 31 December 2034 0770 1050 zinc oxide, nanoparticles, uncoated Additive or polymer production aid Plastics, silicones For zinc, refer to Annex V. When used in plastics, only to be used in unplasticised polymers. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0771 42774-15-2 1051 N,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl) isophthalamide Additive or polymer production aid All 250 31 December 2037 0772 1455-42-1 1052 2,4,8,10-tetraoxaspiro[5,5]undecane–3,9-diethanol,β3,β3,β9,β9-tetramethyl- (SPG) Monomer or other reactant Plastics 250 The migration of oligomers of less than 1000 Da shall not exceed 2,5 μg/l water (expressed as SPG). Only to be used as a monomer in the production of polyesters. A well described method to determine whether the oligomer migration complies with the restrictions specified shall be provided to the certifying body. This method shall be suitable for use by the certifying body for the purposes of certification. If the method requires a calibration sample, a sufficient sample shall be supplied to the certifying body on its request. 31 December 2037 0773 147398-31-0 1059 poly((R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate) ('PHBH') Additive or polymer production aid All The migration of all oligomers with a molecular weight below 1000 Da shall not exceed 250 μg/l. (34) The substance is a macromolecule obtained from microbial fermentation. 31 December 2037 0774 1060 ground sunflower seed hulls Additive or polymer production aid All Only to be used for cold water applications. The seed hulls shall be obtained from sunflower seeds that are fit for human consumption. The processing temperature of the plastic containing the additive shall not exceed 240 °C. 31 December 2037 0775 80512-44-3 1061 2,4,4′-trifluorobenzophenone Monomer or other reactant Plastics Only to be used as a co-monomer in the manufacture of polyether ether ketone plastics up to 0,3 % w/w of the final material. 31 December 2034 0776 1547-26-8 1063 2,3,3,4,4,5,5-heptafluoro-1-pentene Other (starting substance for a polymeric additive) Plastics (38) Only to be used together with tetrafluoroethylene and/or ethylene co-monomers to manufacture fluorocopolymers for application as polymer processing aid at up to 0,2 % w/w of the drinking water contact material, and when the low-molecular mass fraction below 1500 Da in the fluorocopolymer does not exceed 30 mg/kg. 31 December 2028 0777 39318-18-8 1064 tungsten oxide Additive or polymer production aid All For tungsten, refer to Annex V. Stoichiometry: WOn, n = 2,72-2,90. When used as reheat agent in polyethylene terephthalate (PET) verification of compliance with the specific migration limit is not required; in all other cases compliance with the specific migration limit shall be verified in accordance with Commission Implementing Decision (EU) 2024/365. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 0778 85711-28-0 1065 mixture of methyl-branched and linear C14-C18 alkanamides, derived from fatty acids Additive or polymer production aid Plastics 250 Only to be used in the manufacture of articles made of polyolefins. Migration of stearamide, under substance with EUPL Number 0248 to which no specific migration limit applies, shall be excluded from verification of the compliance of the migration of the mixture with the specific migration limit laid down for the mixture. 31 December 2028 0779 23985-75-3 1066 1,2,3,4-tetrahydronaphthalene–2,6-dicarboxylic acid, dimethyl ester Monomer or other reactant Plastics 2,5 - expressed as the sum of the substance and of its dimers (cyclic and open chain) Only to be used in a plastic multilayer material, as a co-monomer in the manufacture of a polyester layer that is not in direct contact with water. 31 December 2037 0780 616-38-6 1067 dimethyl carbonate Monomer or other reactant All 2,5 Migration of sum of all polycarbonate oligomers with a molecular weight below 1000 Da must be < 2,5 μg/l. A well described method suitable to determine the oligomer migration needs to be provided to the certifying body, as well as a sufficient sample for calibration upon request. Not for use with 1,6-hexanediol in the manufacture of polycarbonate pre-polymers to manufacture thermoplastic polyurethanes with 4,4′-methylenediphenyldiisocyanate and diols. 31 December 2037 0781 2530-83-8 1068 [3-(2,3-epoxypropoxy)propyl]trimethoxy silane Monomer or other reactant Plastics Only to be used as a component of a sizing agent to treat glass fibres to be embedded in glass-fibre-reinforced low diffusivity plastics (polyethylene terephthalate (PET), polybutylene terephthalate (PBT) and thermoset polyesters and epoxy bisphenol vinylester) in contact with water. In treated glass fibres, residues of the substance must not be detectable at 0,01 mg/kg for the substance and 0,06 mg/kg for each of the reaction products (hydrolysed monomers and epoxy-containing cyclic dimer, trimer and tetramer). 31 December 2037 0782 75-28-5 1069 isobutane Polymer production aid All 31 December 2034 0783 1227937-46-3 1076 phosphorous acid, triphenyl ester, polymer with alpha-hydro-omega-hydroxypoly[oxy(methyl–1,2-ethanediyl)], C10-C16 alkyl esters Additive or polymer production aid Plastics 2,5 To be used only: 31 December 2037 0784 3319-31-1 1078 tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate Additive or polymer production aid Plastics (31) Only to be used as plasticiser to manufacture soft polyvinyl chloride. 31 December 2034 0785 156157-97-0 1080 (triethanolamine-perchlorate, sodium salt) dimer Additive or polymer production aid Plastics (36) (37) Only to be used in rigid polyvinyl chloride. 31 December 2034 0786 52628-03-2 1082 phosphoric acid, mixed esters with 2-hydroxyethyl methacrylate Monomer or other reactant Plastics 2,5 - expressed as the sum of the mono-, di- and triesters of phosphoric acid and the mono-, di-, tri- and tetraesters of diphosphoric acid. Only to be used at up to 0,35 % (w/w) to manufacture polymethylmethacrylate. 31 December 2037 0787 2421-28-5 1083 benzophenone–3,3’,4,4’-tetracarboxylic dianhydride (BTDA) Monomer or other reactant Plastics 2,5 Only to be used at up to 43 % (w/w) as a co-monomer in the production of polyimides. 31 December 2037 0788 9005-82-7 amylose Aid to polymerisation Coatings 31 December 2028 0789 2634-33-5 1,2-benzisothiazol-3(2H)-one Additive Polymer production aid Other (in-can preservative) Rubber, silicone, coatings 25 Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0790 119-53-9 benzoin Polymer production aid Coatings 2,5 31 December 2034 0791 7637-07-2 boron trifluoride Aid to polymerisation Plastics, rubber For boron and fluoride, refer to Annex V. 31 December 2034 0792 109-63-7 boron trifluoride etherate Aid to polymerisation Plastics For boron and fluoride, refer to Annex V. 31 December 2034 0793 75-65-0 tert-butanol Polymer production aid Plastics, coatings 500 31 December 2034 0794 25085-50-1 4-tert-butylphenol formaldehyde resin Aid to polymerisation Rubber 4-tert butylphenol MTCtap = 2,5 μg/l formaldehyde MTCtap = 750 μg/l xylene MTCtap = 50,0 μg/l (15) Oligomers MW < 1000 Da: max. 25 %; methylol groups: max. 16 %. 31 December 2034 0795 7789-75-5 calcium fluoride Additive Plastics For fluoride, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0796 8007-24-7 cashew nut shell liquid, distilled ( > 90 % cardanol) Monomer or other reactant Coatings 2,5 Not for use as reactive diluent. 31 December 2034 0797 9004-35-7 cellulose acetate Monomer or other reactant Coatings 31 December 2028 0798 9004-39-1 cellulose acetate propionate Monomer or other reactant Coatings 31 December 2028 0799 26172-55-4 5-chloro-2-methyl-2H-isothiazol-3-one Other (in-can preservative) Coatings, silicone 0,5 Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0800 21679-31-2 chromium(III)acetylacetonate Polymer production aid Plastics For chromium, refer to Annex V. 31 December 2034 0801 10025-73-7 chromium(III)chloride Aid to polymerisation Plastics For chromium, refer to Annex V. 31 December 2034 0802 11118-57-3 chromium oxide Aid to polymerisation Plastics For chromium, refer to Annex V. 31 December 2034 0803 7681-65-4 copper(I)iodide Aid to polymerisation Plastics, rubber, coatings (6) For copper, refer to Annex V. 31 December 2034 0804 110-05-4 di-tert-butyl peroxide Aid to polymerisation Plastics, rubber 0,1 tert-butanol MTCtap = 500 μg/l methyl tert-butyl ether MTCtap = 15 μg/l 31 December 2034 0805 75-09-2 dichloromethane Polymer production aid Plastics, rubber, coatings 2,5 31 December 2028 0806 112-34-5 diethylene glycol monobutyl ether (DEGBE) Polymer production aid Coatings, silicone (40) 31 December 2034 0807 127-19-5 dimethylacetamide Polymer production aid Plastics 2,5 31 December 2028 0808 1323-83-7 distearic acid, diester with glycerol Additive Polymer production aid Plastics 31 December 2028 0809 100-41-4 ethylbenzene Polymer production aid Plastics, coatings, silicone 30 31 December 2034 0810 111-76-2 ethyleneglycol monobutyl ether Polymer production aid Coatings, silicone (2) 31 December 2034 0811 112-25-4 ethyleneglycol monohexyl ether Polymer production aid Coatings (2) 31 December 2034 0812 31566-31-1 glycerol monostearate Additive Polymer production aid Rubber, coatings, silicone 31 December 2034 0813 1333-74-0 hydrogen Polymer production aid Rubber 31 December 2037 0814 8006-54-0 lanolin (pharmacopeia grade) Aid to polymerisation Coatings 31 December 2028 0815 25182-44-9 methacrylic acid, chromium (III) salt Polymer production aid Aid to polymerisation Plastics (22) For chromium, refer to Annex V. 31 December 2028 0816 78-93-3 methyl ethyl ketone (butan-2-one) Polymer production aid Additive Plastics, coatings, silicone, lubricants 250 31 December 2034 0817 108-10-1 methyl isobutyl ketone (4-methylpentan-2-one) Polymer production aid Plastics, coatings, silicone 250 31 December 2028 0818 2163-42-0 2-methylpropane–1,3-diol Monomer or other reactant Coatings 250 31 December 2034 0819 7782-44-7 oxygen Aid to polymerisation Plastics 31 December 2037 0820 27619-97-2 perfluorohexylethylsulfonic acid Additive Polymer production aid Plastics, coatings 0,1 (38) (39) 31 December 2028 0821 103-71-9 phenyl isocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2034 0822 1314-56-3 phosphoric anhydride Monomer or other reactant Aid to polymerisation Coatings 31 December 2034 0823 9014-85-1 polyethyleneglycol-2,4,7,9-tetramethyl-5-decyn–4,7-diol ether Additive Polymer production aid Coatings Only to be used for sintered PTFE coatings. 31 December 2034 0824 37349-34-1 polyglyceryl-5 stearate Additive Coatings, silicone 31 December 2037 0825 9046-10-0 polyoxypropylene diamine (POPDA) Monomer or other reactant Coatings 2,5 Average MW≥230 Da; purity: min. 80 % POPDA. 31 December 2037 0826 9002-89-5 polyvinyl alcohol Additive Polymer production aid Plastics, rubber Production by sintering. Maximum residual content in the final material (QM) = 20000 mg/kg. 31 December 2037 0827 12136-45-7 potassium oxide Additive Plastics If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0828 9000-59-3 shellac Monomer or other reactant Coatings 31 December 2028 0829 7681-49-4 sodium fluoride Additive Plastics For fluoride, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0830 1313-59-3 sodium oxide Additive Polymer production aid Other (processing aid) All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0831 7782-99-2 sulfurous acid Additive Plastics, rubber (18) If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0832 7646-78-8 tin(IV)chloride Aid to polymerisation Coatings 31 December 2034 0833 108-88-3 toluene Additive Polymer production aid Rubber, coatings, silicone 60 Note: the MTCtap is higher than the odour threshold. 31 December 2034 0834 101-37-1 triallylcyanurate Aid to polymerisation Rubber 2,5 31 December 2034 0835 16938-22-0 2,2,4-trimethylhexane–1,6 diisocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0836 15646-96-5 2,4,4-trimethylhexane–1,6-diisocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0837 3048-64-4 5-vinyl-2-norbornene Monomer or other reactant (comonomer) Rubber 2,5 31 December 2034 0838 wheat protein Polymer production aid Additive All 31 December 2028 0839 1330-20-7 xylene Polymer production aid Plastics, coatings, silicone 50 Note: the MTCtap is higher than the odour threshold. 31 December 2034 0840 zinc dust Additive Coatings For zinc, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 0841 55799-16-1 zinc hydroxyphosphite Additive Coatings For zinc, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0842 17501-44-9 acetyl acetonic acid, zirconium salt Monomer or other reactant Aid to polymerisation Silicone 31 December 2031 0843 63449-41-2 alkyl(C8-C18)dimethylbenzylammonium chloride Additive Polymer production aid Lubricants 31 December 2028 0844 54326-11-3 aluminium hydroxide benzoate stearate Polymer production aid Additive Lubricants For aluminium, refer to Annex V. 31 December 2031 0845 1760-24-3 [3-(2-aminoethyl)aminopropyl]trimethoxysilane Polymer production aid Plastics, coatings 0,1 31 December 2031 0846 26125-61-1 aramid fibres Additive (polymeric) Rubber p-phenylendiamine MTCtap = 0,1 μg/l terephthalic acid MTCtap = 375 μg/l 31 December 2034 0847 95-33-0 benzothiazyl-2-cyclohexylsulfenamide Aid to polymerisation Rubber 0,1 2-mercaptobenzothiazole (2-MBT) (CAS No. 149-30-4) MTCtap = 100 μg/l 2,2‘-Ddithio-bis-benzothiazole (Di(benzothiazole-2-yl)disulfide, MBTS) (CAS No. 120-78-5) MTCtap = 2.5 μg/l benzothiazole (BT) (CAS No. 95-16-9) MTCtap = 0.1 μg/l 2-benzothiazolone (BTon) (CAS No. 934-34-9) MTCtap = 0.1 μg/l cyclohexylamine (CAS No. 108-91-8) MTCtap = 2.5 μg/l (43) 31 December 2031 0848 78-63-7 2,5-bis(tert-butylperoxy)-2,5-dimethylhexane Aid to polymerisation Plastics, rubber, coatings 0,1 When used for rubber, the following degradation products are relevant: tert-butanol MTCtap = 500 μg/l tert-amylalcohol MTCtap = 0,1 μg/l 2,5-dimethyl-hexanediol MTCtap = 0,1 μg/l 2,2,5,5-tetramethyltetrahydrofurane MTCtap = 0,1 μg/l (NB. it could not be analysed as no standard available) For DHBP application above 0.4%: 3,3,6,6-tetramethyl–1,2-dioxane MTCtap = 0,1 μg/l di-tert-butylperoxide MTCtap = 0,1 μg/l (both impurities of DHBP) 31 December 2031 0849 25155-25-3 {2212-81-9 & 2781-00-2} 1,3-(and/or 1,4)-bis(tert-butylperoxyisopropyl)benzene Aid to polymerisation Plastics, rubber 0,1 No peroxide on the product surface. 31 December 2031 0850 85-60-9 bis(2-methyl-4-hydroxy-5-tert-butylfenyl)butane Additive Rubber 15 31 December 2031 0851 101-67-7 bis(4-octylphenyl)amine; (4,4'-dioctyldiphenylamine) Additive Rubber 2,5 Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0852 39817-09-9 bisphenol-F-diglycidylether (BFDGE; bis(hydroxyphenyl) methane bis(2,3-epoxypropyl) ethers) Monomer or other reactant (resin) Coatings 2,5 - expressed as the sum of BFDGE and hydrolysis products bisphenol F MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0.1 μg/l (49) 31 December 2028 0853 7726-95-6 bromine Monomer or other reactant Rubber 31 December 2031 0854 95-31-8 N-tert-butyl-2-benzothiazolesulfenamide Aid to polymerisation Rubber (43) 31 December 2031 0855 98-29-3 4-tert-butylcatechol Additive Coatings, silicone 31 December 2031 0856 3457-61-2 tert-butylcumylperoxide Aid to polymerisation Coatings, silicone No peroxide on the product surface. 31 December 2031 0857 17540-75-9 4-sec-butyl-2,6-di-tert-butylphenol Additive Plastics, rubber 2,5 For the MTCtap values of degradation products, refer to Table 4. 31 December 2031 0858 88-18-6 2-tert-butylphenol Monomer of other reactant Plastics, coatings 0,1 31 December 2031 0859 2556-36-7 1,4-cyclohexanediisocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0860 17796-82-6 N-(cyclohexylthio)phthalimide Aid to polymerisation Rubber 150 31 December 2031 0861 101-77-9 4,4'-diaminodiphenylmethane Monomer or other reactant Coatings 0,1 31 December 2028 0862 68953-84-4 N,N'-diaryl-p-phenylenediamine Additive Rubber 0,1 31 December 2031 0863 94-36-0 dibenzoyl peroxide Aid to polymerisation Plastics, rubber, silicone 0,1 31 December 2031 0864 6731-36-8 1,1-di-tert-butylperoxy-3,3,5-trimethylcyclohexane Aid to polymerisation Plastics, rubber 0,1 No peroxide on the product surface. 31 December 2031 0865 96-76-4 2,4-di-tert-butylphenol Additive Rubber 31 December 2031 0866 77-58-7 dibutyltin dilaurate Aid to polymerisation Plastics, coatings, silicone 0,1 31 December 2028 0867 133-14-2 2,4-dichlorobenzoyl peroxide Aid to polymerisation Coatings, silicone 0,1 No peroxide on the product surface. 31 December 2031 0868 80-43-3 dicumyl peroxide Aid to polymerisation Plastics, rubber, silicone 0,1 When used for rubber or silicone, the following degradation products are relevant: cumylalcohol MTCtap = 2,5 μg/l methylcumylether MTCtap = 0,1 μg/l alpha-methylstyrene MTCtap = 0,7 μg/l acetophenone MTCtap = 2,5 μg/l 31 December 2031 0869 77-73-6 dicyclopentadiene Monomer or other reactant Rubber 2,5 31 December 2031 0870 111-90-0 diethyleneglycol monoethyl ether Polymer production aid Coatings (40) 31 December 2031 0871 140-01-2 diethylenetriaminepentaacetic acid pentasodium salt Polymer production aid Plastics 31 December 2028 0872 3710-84-7 N,N-diethylhydroxylamine Aid to polymerisation Plastics Maximum dosage = 0,02 % (w/w). Maximum quantity of diethylamine impurity in the product 0,1 %. Maximum quantity of N-nitrosodiethylamine impurity in the product 0,5 mg/kg. 31 December 2031 0873 1047-16-1 5,12-dihydroquino[2,3-b]acridine–7,14-dione Additive Plastics, coatings If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 0874 3437-84-1 diisobutyryl peroxide Aid to polymerisation Plastics 0,1 Maximum dosage = 0,02 % (w/w). No peroxide on the product surface. 31 December 2031 0875 105-74-8 dilauroyl peroxide Aid to polymerisation Plastics No peroxide on the product surface. 31 December 2031 0876 109-87-5 dimethoxymethane Monomer or other reactant Aid to polymerisation Plastics 31 December 2031 0877 124-40-3 dimethylamine Monomer or other reactant Rubber, coatings 3,0 31 December 2031 0878 7005-47-2 2-dimethylamino-2-methyl-1-propanol Additive Plastics 31 December 2031 0879 895-85-2 di(4-methyl-benzoyl)peroxide Aid to polymerisation Silicone No peroxide on the product surface. Not for use in rubber. 31 December 2031 0880 53880-86-7 dimethyldiphenylthiuram disulfide Aid to polymerisation Rubber (42) 31 December 2028 0881 115-10-6 dimethyl ether Polymer production aid Coatings < 1 31 December 2031 0882 68-12-2 N,N-dimethylformamide Polymer production aid Plastics, coatings 2,5 31 December 2028 0883 70131-67-8 dimethylsiloxane, hydroxy terminated Monomer or other reactant (base oil) Lubricants 31 December 2028 0884 3806-34-6 dioctadecyl pentaerythritol diphosphite Additive Plastics 31 December 2031 0885 971-15-3 di-N-pentamethylenethiuram hexasulfide Aid to polymerisation Rubber (42) 31 December 2031 0886 120-54-7 di-N-pentamethylenethiuram tetrasulfide Aid to polymerisation Rubber (42) 31 December 2028 0887 122-39-4 diphenylamine Aid to polymerisation Plastics, rubber Maximum dosage = 0,1 % (w/w). 31 December 2031 0888 68411-46-1 diphenylamine, octylated Additive Rubber Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. Maximum residual content in the final material (QM) = 15 g/kg. 31 December 2031 0889 102-06-7 N,N-diphenylguanidine Aid to polymerisation Rubber 2,5 31 December 2028 0890 120-78-5 dithiobis(2-benzothiazole) Aid to polymerisation Rubber 2,5 mercaptobenzothiazol MTCtap = 100 μg/l N-nitrosamines MTCtap = 0,3 μg/l (43) 31 December 2031 0891 87057-87-2 2-ethylbutane–1,4-diisocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0892 110-80-5 ethyleneglycol monoethyl ether Monomer or other reactant Polymer production aid Coatings, silicone (2) 31 December 2028 0893 109-86-4 ethyleneglycol monomethyl ether Polymer production aid Coatings (2) 31 December 2028 0894 149-57-5 2-ethylhexanoic acid Additive Polymer production aid Plastics 2,5 31 December 2031 0895 17689-77-9 ethyltrisacetoxysilane Aid to polymerisation Silicone 31 December 2031 0896 28106-30-1 ethylvinylbenzene Monomer or other reactant Plastics (44) 31 December 2028 0897 78-27-3 ethynylcyclohexanol Polymer production aid Rubber, coatings, silicone 900 31 December 2031 0898 9003-08-1 formaldehyde-2,4,6-triamino-1,3,5-triazine, copolymer Additive Coatings (15) Only for sintered PTFE. 31 December 2037 0899 9006-24-0 formaldehyde-xylene, copolymer Monomer or other reactant (resin) Other (processing aid) Rubber (15) 31 December 2028 0900 592-45-0 1,4-hexadiene Monomer or other reactant Rubber (45) 31 December 2028 0901 592-42-7 1,5-hexadiene Monomer or other reactant Rubber (45) 31 December 2031 0902 16096-31-4 1,6 hexanediol diglycidyl ether Additive Coatings 0,1 31 December 2028 0903 2-hydroxy-2-sulfinato acetic acid, disodium salt Aid to polymerisation Plastics (18) When used in a mixture of 2-hydroxy-2-sulfinato acetic acid, disodium salt (35-60 %), 2-hydroxy-2-sulfonato acetic acid, disodium salt (10-60 %) and sodium sulfite (0-40 %) (mixture), the maximum dosage shall be 0,5 %. 31 December 2028 0904 2-hydroxy-2-sulfonato acetic acid, disodium salt Aid to polymerisation Plastics (18) When used in a mixture of 2-hydroxy-2-sulfinato acetic acid, disodium salt (35-60 %), 2-hydroxy-2-sulfonato acetic acid, disodium salt (10-60 %) and sodium sulfite (0-40 %) (mixture), the maximum dosage shall be 0,5 %. 31 December 2028 0905 2226-96-2 4-hydroxy-2,2,6,6-tetramethylpiperidinoxyl Aid to polymerisation Plastics 2,5 No peroxide on the product surface. 31 December 2031 0906 55406-53-6 3-iodo-2-propynylbutylcarbamate Aid to polymerisation Rubber, coatings 31 December 2031 0907 78-83-1 isobutanol Polymer production aid Silicone 31 December 2031 0908 7425-80-1 isobutyl titanate Aid to polymerisation Silicone 31 December 2031 0909 3999-01-7 linoleamide Aid to polymerisation Coatings, silicone 31 December 2028 0910 149-30-4 2-mercaptobenzothiazole Aid to polymerisation Rubber 100 (43) 31 December 2031 0911 60-24-2 2-mercaptoethanol Additive Plastics, rubber 2,5 31 December 2031 0912 68440-24-4 mercaptoethyl tallate Additive or polymer production aid Plastics 1500 31 December 2028 0913 115-19-5 methyl-2-butyn-3-ol-2 Aid to polymerisation Coatings, silicones 31 December 2031 0914 15520-10-2 2-methyl–1,5-diaminopentane Monomer or other reactant Coatings 5,0 31 December 2031 0915 7786-17-6 2,2-methylenebis(4-methyl-6-nonylphenol) Additive Plastics, rubber 0,1 31 December 2031 0916 598-09-4 methylepichlorhydrin Monomer or other reactant Coatings 0,1 31 December 2028 0917 96-29-7 methyl ethyl ketone oxime Aid to polymerisation Coatings 120 Only for hot curing coatings. 31 December 2028 0918 693-98-1 2-methylimidazole Additive Coatings 2,5 31 December 2028 0919 534-26-9 2-methylimidazoline Additive or polymer production aid Coatings 0,1 31 December 2028 0920 34813-62-2 2-methylpentane–1,5-diisocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0921 201687-58-3 methyltin-2-mercaptoethyl tallate Aid to polymerisation Plastics 9,0 31 December 2028 0922 4253-34-3 methyltrisacetoxysilane Aid to polymerisation Silicone 31 December 2031 0923 22984-54-9 methyltrisbutanoximosilane Aid to polymerisation Silicone 31 December 2031 0924 240-040-8 15901-40-3 methyltriscyclohexylaminosilane Aid to polymerisation Silicone 31 December 2031 0925 253-634-7 37697-65-7 methyltris-sec.-butylaminosilane Aid to polymerisation Silicone 31 December 2031 0926 polytitanic acid, butyl ester (butylpolytitanate) Aid to polymerisation Silicone 31 December 2028 0927 108-90-7 monochlorobenzene Additive Plastics, coatings 1,0 31 December 2031 0928 51240-95-0 neodecaneperoxoic acid, 1,1,3,3-tetramethylbutyl ester Aid to polymerisation Plastics 0,1 Maximum dosage = 0,06 % (w/w). No peroxide on the product surface. 31 December 2031 0929 9084-06-4 naphthalene sulfonic acid-formaldehyde condensation product, sodium salt Polymer production aid Plastics, rubber (15) Only for sintered products. 31 December 2037 0930 7697-37-2 nitric acid Polymer production aid Plastics, coatings 5,0 31 December 2031 0931 26530-20-1 2-octyl-2H-isothiazole-3-one Other (in-can preservative) Rubber Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 0932 8012-95-1 8042-47-5 paraffin oil Additive Plastics, rubber 31 December 2031 0933 614-45-9 peroxybenzoic acid, tert-butyl ester Aid to polymerisation Plastics, coatings 0,1 31 December 2031 0934 15520-11-3 peroxydicarbonic acid, bis(4-tert-butylcyclohexyl) ester Aid to polymerisation Plastics, coatings 0,1 No peroxide on the product surface. 31 December 2031 0935 16111-62-9 peroxydicarbonic acid, bis(2-ethylhexyl) ester Aid to polymerisation Plastics 0,1 No peroxide on the product surface. 31 December 2031 0936 26322-14-5 peroxydicarbonic acid, dicetyl ester Aid to polymerisation Plastics 0,1 No peroxide on the product surface. 31 December 2031 0937 53220-22-7 peroxydicarbonic acid, dimyristyl ester Aid to polymerisation Plastics 0,1 No peroxide on the product surface. 31 December 2031 0938 927-07-1 peroxypivalic acid, tert-butyl ester Aid to polymerisation Plastics 0,1 31 December 2031 0939 3006-82-4 peroxy-2-ethylhexanoic acid, tert-butyl ester Aid to polymerisation Plastics, rubber 0,1 31 December 2031 0940 7775-27-1 peroxydisulfuric acid, disodium salt Aid to polymerisation Plastics, coatings 0,1 31 December 2031 0941 26748-41-4 peroxyneodecanoic acid, tert-butyl ester Aid to polymerisation Plastics 0,1 31 December 2031 0942 7727-21-1 peroxydisulfuric acid, dipotassium salt Aid to polymerisation Plastics, coatings 0,1 31 December 2031 0943 68610-06-0 phenols, butylated, isobutylated or octylated Additive Rubber For the MTCtap values of degradation products, refer to Table 4. 31 December 2028 0944 61788-44-1 phenols, styrenated Additive Rubber, coatings 31 December 2031 0945 936-49-2 2-phenylimidazol Monomer or other reactant Coatings 2,5 31 December 2031 0946 104-49-4 1,4-phenylene diisocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 0947 7774-80-3 phenyl-o-tolyl-phenylenediamine Additive Rubber 0,1 31 December 2028 0948 126-73-8 phosphoric acid, tributyl ester Additive Polymer production aid Rubber 31 December 2028 0949 10294-56-1 phosphorous acid Additive Rubber If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 0950 54771-30-1 phosphorous acid, dinonylphenyl bis(nonylphenyl) ester Additive Plastics 300 31 December 2028 0951 84-61-7 phthalic acid, dicyclohexyl ester Additive Plastics 300 Maximum dosage = 5 % (w/w) as sum of all phthalates. 31 December 2028 0952 110-85-0 piperazine Monomer or other reactant Plastics, rubber 75 31 December 2028 0953 9003-01-4 polyacrylic acid Additive Rubber (21) 31 December 2031 0954 9003-29-6 polybutene Monomer or other reactant (base oil) Additive Polymer production aid Rubber, lubricants Molecular weight > 1000 Da. 31 December 2034 0955 68937-10-0 polybutene, hydrogenated Monomer or other reactant (base oil) Lubricants Molecular weight > 1000 Da. 31 December 2037 0956 68132-00-3 polycyclopentadiene Monomer or other reactant (resin) Plastics 31 December 2028 0957 polyethyleneamine Additive Plastics, coatings For polypropylene as an anchoring agent: ≤ 0,05 μg/dm2 provided that the product does not release ethyleneimine. 31 December 2031 0958 polyethylene aminostearamide ethylsulfate Additive Coatings 31 December 2034 0959 28208-80-2 poly(ethylene-co-acrylic acid), zinc salt Monomer or other reactant Plastics (21) For zinc, refer to Annex V. 31 December 2037 0960 9005-07-6 polyethyleneglycol dioleate Additive Coatings 31 December 2034 0961 9003-27-4 polyisobutene Monomer or other reactant (base oil) Additive (polymeric) for rubber Plastics, rubber, lubricants Molecular weight > 1000 Da. 31 December 2037 0962 poly(styrene-co-maleic anhydride) Additive Plastics 31 December 2037 0963 9002-84-0 polytetrafluoroethylene Additive (polymeric) Coatings, lubricants, silicone 2,5 - for the residual tetrafluoroethylene (38) 31 December 2028 0964 25498-06-0 polyvinyl cyclohexane Polymer production aid Rubber 31 December 2037 0965 poly(vinyl methyl ether) Additive Plastics 31 December 2037 0966 35674-65-8 N,N''-1,3-propanediyl bis-(N'-octadecylurea) Additive Polymer production aid Coatings 2,5 31 December 2031 0967 108-32-7 propylene carbonate Polymer production aid Lubricants 31 December 2031 0968 122-62-3 sebacic acid, bis(2-ethylhexyl) ester Additive (polymeric) Plastics 31 December 2031 0969 52829-07-9 sebacic acid, bis(2,2,6,6-tetramethyl-4-piperidyl) ester Additive Polymer production aid Plastics, lubricants 300 31 December 2031 0970 sodium aluminate Additive Coatings If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 0971 149-44-0 sodium hydroxymethanesulfinate Aid to polymerisation Plastics Maximum dosage = 0,07 % (w/w). 31 December 2031 0972 stearoyl-palmitoyl-benzoyl-methane Monomer or other reactant Plastics 31 December 2028 0973 68442-68-2 styrene, reaction product with diphenylamine Additive Rubber 2,5 31 December 2031 0974 126-33-0 sulfolane Polymer production aid Plastics 2,5 31 December 2031 0975 7446-09-5 sulfur dioxide Monomer or other reactant Rubber 31 December 2031 0976 10591-85-2 tetrabenzylthiuram disulfide Aid to polymerisation Rubber (42) 31 December 2031 0977 5593-70-4 tetra-n-butyl titanate Aid to polymerisation Plastics, rubber, silicone 31 December 2031 0978 97-77-8 tetraethylthiuram disulfide Aid to polymerisation Plastics, rubber (42) 31 December 2031 0979 811-97-2 1,1,1,2-tetrafluoroethane Additive Plastics (38) Maximum dosage = 2,2 % (w/w). 31 December 2028 0980 3064-73-1 tetraisobutylthiuramdisulfide Additive or polymer production aid Rubber (42) 31 December 2031 0981 126-86-3 2,4,7,9-tetramethyl-5-decyne–4,7-diol Aid to polymerisation Rubber Maximum dosage = 0,1 % (w/w). 31 December 2031 0982 137-26-8 tetramethylthiuram disulfide Aid to polymerisation Rubber (42) 31 December 2031 0983 97-74-5 tetramethylthiuram monosulfide Aid to polymerisation Rubber (42) 31 December 2031 0984 26471-62-5 toluene diisocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 0985 104-15-4 p-toluenesulfonic acid Aid to polymerisation Plastics, rubber 0,5 31 December 2031 0986 93-69-6 o-tolylbiguanidine Aid to polymerisation Rubber 0,1 31 December 2031 0987 1025-15-6 triallyl isocyanurate Aid to polymerisation Rubber 0,1 31 December 2031 0988 28807-72-9 tricyclododecane diisocyanate Monomer or other reactant Coatings (16) Maximum residual content in the final material (QM) = 1 mg/kg, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 0989 90-72-2 2,4,6-tri(dimethylaminomethyl)phenol Aid to polymerisation Rubber, coatings 0,1 31 December 2031 0990 78-40-0 triethyl phosphate Additive Polymer production aid Plastics, coatings 375 31 December 2031 0991 7718-98-1 vanadium chloride Aid to polymerisation Plastics, rubber For vanadium, refer to Annex V. 31 December 2031 0992 11099-11-9 vanadium oxide Aid to polymerisation Plastics, rubber For vanadium, refer to Annex V. 31 December 2028 0993 88-12-0 vinylpyrrolidone Monomer Additive Polymer production aid Plastics 31 December 2028 0994 14726-36-4 zinc dibenzyldithiocarbamate Aid to polymerisation Rubber (42) For zinc, refer to Annex V. 31 December 2031 0995 136-23-2 zinc dibutyldithiocarbamate Aid to polymerisation Rubber (42) For zinc, refer to Annex V. 31 December 2031 0996 14324-55-1 zinc diethyldithiocarbamate Aid to polymerisation Rubber (42) For zinc, refer to Annex V. 31 December 2031 0997 137-30-4 zinc dimethyldithiocarbamate Aid to polymerisation Other (in-can preservative) Rubber, coatings (42) For zinc, refer to Annex V. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 0998 136-53-8 zinc-di-2-ethylhexanoate Monomer or other reactant Silicone Maximum residual content in the final material (QM) = 15 g/kg. 31 December 2031 0999 53801-45-9 zirconium oxide Additive Plastics, rubber For zirconium, refer to Annex V. 31 December 2028 1000 1068-27-5 2,5-bis(tert-butylperoxy)-2,5-dimethyl-3-hexyne Aid to polymerisation Plastics 0,1 31 December 2031 1001 1071-93-8 adipic acid dihydrazide Monomer or other reactant Coatings 2,5 hydrazine MTCtap = 0,1 μg/l – to be checked by analysis. Only for powder coatings. 31 December 2034 1002 1338-23-4 2-butanone peroxide Polymer production aid Aid to polymerisation Plastics 0,1 31 December 2031 1003 13822-56-5 3-(trimethoxysilyl)propylamine Monomer or other reactant Coatings 85 - expressed as silicon Only for use in gas phase coatings on silicones, at max 400 °C; Si/N ratio in the layer should be at least 11. 31 December 2031 1004 14024-18-1 acetylacetonate, iron salt Polymer production aid Aid to polymerisation Plastics, coatings 2,5 Maximum dosage = 0,01 % (w/w). 31 December 2031 1005 1503-48-6 quino [2, 3-b]acridine-6,7,13,14(5H,12H)-tetrone (quinacridinone quinone, QAQ) Additive Plastics 2,0 Purity > 90% QAQ. Specific nanomaterial (> 50% 1-100 nm) in maximum one particle dimension (platelets). 31 December 2031 1006 22288-41-1 1,1,3,3-tetramethylbutyl peroxypivalate Polymer production aid Aid to polymerisation Plastics 1,0 Maximum dosage = 0,007 % (w/w). 31 December 2031 1007 24748-23-0 3,6,9-triethyl-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonane Polymer production aid Aid to polymerisation Plastics 0,1 Maximum dosage = 0,05 % (w/w). 31 December 2031 1008 29240-17-3 (1,1-dimethylpropyl) 2,2-dimethyl-propaneperoxoate Polymer production aid Aid to polymerisation Plastics 0,1 Maximum dosage = 0,2 % (w/w). 31 December 2031 1009 37187-22-7 acetylacetone peroxide Aid to polymerisation Plastics 0,1 31 December 2028 1010 681-84-5 tetramethylorthosilicate Monomer or other reactant Coatings Only for use in gas phase coatings on silicones. 31 December 2031 1011 94-96-2 2-ethyl–1,3-hexanediol Monomer or other reactant Plastics, coatings 2,5 31 December 2031 1012 3851-87-4 di-(3,5,5-trimethyl)-hexanoyl)peroxide Aid to polymerisation Plastics, rubber, coatings, silicone 0,1 Maximum dosage = 0,2 % (w/w). 31 December 2031 1013 68928-76-7 dimethyltin dineodecanoate Polymer production aid Aid to polymerisation Plastics, rubber, coatings (9) Plastics: maximum dosage = 0,12 % (w/w). Rubber, coatings: maximum dosage = 1 % (w/w). 31 December 2031 1014 231-765-0 7722-84-1 hydrogen peroxide Aid to polymerisation Plastics, rubber, coatings 0,1 31 December 2031 1015 80-15-9 cumene hydroperoxide Monomer or other reactant (crosslinker incorporated into polymer) Aid to polymerisation Plastics, rubber, coatings 0,1 Maximum dosage = 1 % (w/w). 31 December 2031 1016 236-050-7 13122-18-4 peroxy(3,5,5-trimethylhexanoic acid), tert-butyl ester Aid to polymerisation Plastics, rubber, coatings 0,1 Maximum dosage = 1 % (w/w). 31 December 2031 1017 246-619-1 25103-58-6 tert-dodecanethiol Polymer production aid Aid to polymerisation Plastics, rubber, coatings Plastics: maximum dosage = 0,7 % (w/w). Rubber: maximum dosage = 1 % (w/w). 31 December 2031 1018 231-786-5 7727-54-0 ammonium persulfate Aid to polymerisation Plastics, rubber, coatings 0,1 For ammonium, refer to Annex V. Maximum dosage = 1 % (w/w). 31 December 2031 1019 7705-07-9 titanium trichloride Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1020 203-650-5 109-13-7 tert-butyl peroxyisobutyrate Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1021 203-710-0 109-83-1 2-methylaminoethanol Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1022 203-874-3 111-48-8 thiodiglycol Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1023 112-55-0 1-dodecanethiol Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1024 114-83-0 acetophenylhydrazine Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2028 1025 204-469-4 121-44-8 triethylamine Aid to polymerisation Plastics, rubber, coatings 0,1 31 December 2031 1026 204-709-8 124-68-5 2-amino-2-methylpropanol Polymer production aid Plastics, rubber, coatings 31 December 2031 1027 236-740-8 13472-08-7 2,2'-azobis[2-methylbutyronitrile] Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1028 13476-99-8 vanadium tris acetyl acetonate Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1029 14666-78-5 diethylperoxydicarbonate Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1030 205-769-8 150-76-5 4-methoxyphenol Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1031 16066-38-9 di-n-propyl peroxydicarbonate Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1032 240-344-0 16215-49-9 dibutyl peroxydicarbonate Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1033 218-880-1 2273-43-0 butylhydroxyoxostannane Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1034 22743-71-1 1,1-bis(t-hexyperoxy)cyclohexane Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2028 1035 252-091-3 34562-31-7 3,5-diethyl–1,2-dihydro-1-phenyl-2-propylpyridine Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1036 224-305-5 4297-95-4 sodium phenylphosphinate Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1037 226-218-8 5329-14-6 sulfamidic acid Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1038 208-778-5 541-41-3 ethyl chloroformate Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1039 210-036-0 603-35-0 triphenylphosphine Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1040 270-877-4 68479-98-1 diethylmethylbenzenediamine Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1041 200-915-7 75-91-2 tert-butyl hydroperoxide Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2028 1042 231-780-2 7727-18-6 vanadium trichloride oxide Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1043 201-321-0 81-07-2 1,2-benzisothiazol-3(2H)-one 1,1-dioxide Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1044 212-791-1 870-08-6 dioctyltin oxide Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1045 92-84-2 phenothiazine Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1046 202-443-7 95-71-6 2-methylhydroquinone Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1047 202-805-4 99-97-8 N,N-dimethyl-p-toluidine Aid to polymerisation Plastics, rubber, coatings Maximum dosage = 1 % (w/w). 31 December 2031 1048 111-70-6 1-heptanol Monomer or other reactant Coatings 31 December 2031 1049 112-53-8 1-dodecanol Monomer or other reactant Coatings 31 December 2031 1050 8002-11-7 poppy-seed oil Monomer or other reactant Coatings 31 December 2028 1051 8024-09-7 walnut oil Monomer or other reactant Coatings 31 December 2028 1052 109-52-4 valeric acid Monomer or other reactant Coatings 31 December 2031 1053 111-27-3 1-hexanol Monomer or other reactant Coatings 31 December 2031 1054 112-72-1 1-tetradecanol Monomer or other reactant Coatings 31 December 2031 1055 112-92-5 1-octadecanol Monomer or other reactant Coatings 31 December 2031 1056 163149-29-9 poly-alpha-olefin from 1-dodecene and 1-octene Monomer or other reactant (base oil) Lubricants Average molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3.8 cSt (3.8 × 10-6 m2/s). Polymerisation production aids and additives less than 0,02 % (w/w) in polymer. 31 December 2037 1057 219756-63-5 sodium-alpha-C11-alcohol-heptaglycol ether-omega-sulfate Aid to polymerisation Coatings 250 31 December 2028 1058 25038-74-8 polylaurolactam Polymer production aid Additive Lubricants 250 - for laurolactam Oligomers with MW < 1000 Da maximum 2 %. 31 December 2037 1059 68071-15-8 butandiololeate, ethoxylated Other (processing aid) Rubbers 2,5 31 December 2034 1060 68132-21-8 perilla oil Monomer or other reactant Coatings 31 December 2028 1061 68439-49-6 polyethylene glycol (EO=2-6) monoalkyl(C16-C18)ether Additive Aid to polymerisation Plastics, rubber, coatings 2,5 31 December 2028 1062 69011-36-5 isotridecanol, ethoxylated Additive Polymer production aid Coatings 90 Maximum residue of 0,2 mg ethylene oxide per kg polymer. 31 December 2031 1063 8001-21-6 sunflower oil Monomer or other reactant Coatings 31 December 2028 1064 8001-23-8 safflower oil Monomer or other reactant Coatings 31 December 2028 1065 8001-26-1 linseed oil Monomer or other reactant Additive Rubber, coatings In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1066 8001-29-4 cotton seed oil Monomer or other reactant Coatings 31 December 2028 1067 8001-30-7 corn oil Monomer or other reactant Coatings 31 December 2028 1068 8001-31-8 coconut oil Monomer or other reactant Coatings 31 December 2028 1069 8001-78-3 castor oil, hydrogenated Monomer or other reactant Additive Polymer production aid Coatings 31 December 2031 1070 8002-26-4 tall oil Monomer or other reactant Coatings 31 December 2031 1071 8008-74-0 sesame oil Monomer or other reactant Coatings 31 December 2028 1072 8015-74-5 beechnut oil Monomer or other reactant Coatings 31 December 2028 1073 8016-13-5 fish oil Monomer or other reactant Coatings 31 December 2028 1074 8016-24-8 hempseed oil Monomer or other reactant Coatings 31 December 2028 1075 8016-49-7 pumpkin seed oil Monomer or other reactant Coatings 31 December 2028 1076 89-05-4 pyromellitic acid Monomer or other reactant Coatings 2,5 – expressed as the sum of pyromellitic acid and pyromellitc anhydride 31 December 2031 1077 9003-17-2 polybutadiene Additive Plastics, rubber MW > 1000 Da. 31 December 2037 1078 9003-31-0 polyisoprene Additive Rubber MW > 1000 Da. 31 December 2037 1079 9004-96-0 poly (ethylene glycol) monooleate Additive Coatings Restriction is covered via the parameter TOC < 0,5 mg/l. 31 December 2028 1080 1,1,3-tris-(2-methyl-4-di-tridecylphosphite-5-tert-butyl-phenyl)-butane with added diphenylphosphite Additive Plastics For the MTCtap values of degradation products, refer to Table 4. For polyethylene and polypropylene, maximum residual content in the final material (QM) = 5000 mg/kg. 31 December 2028 1081 504-60-9 1,3-pentadiene Monomer or other reactant Rubber 31 December 2031 1082 513-85-9 2,3-butanediol Monomer or other reactant Rubber 31 December 2031 1083 1,4-dihydro–2,6-dimethyl–3,5-dicarbododecyloxy-pyridine Additive Plastics For PVC and its copolymers, maximum residual content in the final material (QM) = 3000 mg/kg. 31 December 2028 1084 1-hydropentafluoro propene Monomer or other reactant Rubber (38) 31 December 2028 1085 2-tert-butyl-4-hydroxyanisole Additive Rubber 31 December 2031 1086 3-tert-butyl-4-hydroxyanisole Additive Rubber 31 December 2028 1087 2,4-diphenylmethane-diisocyanate Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines (16) Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1088 2,6-diphenylmethane-diisocyanate Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines (16) Maximum residual content in the final material (QM) = 1 mg/kg in product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2028 1089 213-593-8 992-55-2 4,4'-[[6-(octylthio)-1,3,5-triazine–2,4-diyl]bis(oxy)]bis[2,6-di-tert-butylphenol] Additive Plastics, rubber 31 December 2028 1090 202-918-9 101-14-4 3,3'-dichloro–4,4'-diamino-diphenylmethane Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines 31 December 2028 1091 212-677-1 843-55-0 4,4'-dioxydiphenyl–1,1'-cyclohexane Monomer or other reactant Plastics 31 December 2028 1092 204-279-1 118-82-1 4,4'-methylene-bis-(2,6-di-tert-butylphenol) Additive Plastics For the MTCtap values of degradation products, refer to Table 4. 31 December 2031 1093 204-124-8 116-09-6 1-hydroxypropan-2-one Additive Rubber 31 December 2031 1094 205-617-0 144-15-0 acetyl-tri-2-ethylhexyl-citrate Additive Plastics 150 31 December 2031 1095 201-066-5 77-89-4 acetyl-triethyl-citrate Additive Plastics 31 December 2031 1096 203-470-7 107-18-6 allyl alcohol Monomer or other reactant Plastics, rubber 31 December 2031 1097 211-546-6 661-19-8 behenic alcohol Additive Plastics 31 December 2028 1098 - 217-576-6 21112-45-8 1892-29-1 beta-amino crotonic acid ester with 2,2'-hydroxy diethylenesulfide Additive Plastics For rigid PVC and its copolymers with predominantly PVC content, maximum residual content in the final material (QM) = 20000 mg/kg in total. 31 December 2028 1099 bis-2-tert-butyl-6-(3-tert-butyl-5-methyl-2-hydroxybenzylphenyl) terephthalate Additive Plastics (27) For polyethylene, maximum residual content in the final material (QM) = 150 mg/kg. For polypropylene, maximum residual content in the final material (QM) = 1000 mg/kg. For polystyrene, maximum residual content in the final material (QM) = 500 mg/kg. 31 December 2028 1100 201-624-8 85-70-1 butyl phthalyl butyl glycolate Additive Plastics 31 December 2028 1101 201-784-9 87-92-3 butyl tartrate Additive Plastics 31 December 2028 1102 269-637-1 68308-22-5 calcium montanate Additive Plastics 31 December 2028 1103 221-941-5 3287-12-5 dicetyl thiodipropionate Additive Rubber (14) Maximum residual content in the final material (QM) = 5000 mg/kg. 31 December 2028 1104 cetylpyridinium chloride Additive Plastics Maximum residual content in the final material (QM) = 4000 mg/kg. 31 December 2031 1105 chlorinated paraffin Additive Plastics 31 December 2031 1106 chlorinated polyethylene Additive Plastics 31 December 2037 1107 chlorinated rubber Additive Rubber 31 December 2028 1108 chloroethylvinylacetate Monomer or other reactant Rubber 31 December 2028 1109 203-799-6 110-75-8 chloroethylvinylether Additive Rubber 31 December 2028 1110 68037-39-8 chlorosulfonated polyethylene Additive Rubber 31 December 2034 1111 215-607-8 1333-82-0 chromic anhydride Additive Plastics For chromium, refer to Annex V. For use as an anchor for polytetrafluoroethylene on aluminium or glass. 31 December 2028 1112 491589-22-1 cis 1,2-cyclo-hexanedicarboxylic acid, calcium salt Additive Plastics 250 31 December 2028 1113 27253-31-2 cobalt neodecanoate Additive Plastics 2,5 - expressed as neodecanoic acid. (46) For cobalt, refer to Annex V. 31 December 2031 1114 condensation product of cinnamic aldehyde and hexamethylenediamine Aid to polymerisation Rubber 31 December 2028 1115 condensation product of n-dodecyl alcohol with ethylene oxide Additive Plastics For use as an antistatic agent for polyolefin resins, maximum residual content in the final material (QM) = 1000 mg/kg. 31 December 2028 1116 condensation products of formaldehyde with melamine Additive Plastics (15) 31 December 2028 1117 condensation products of formaldehyde with urea Monomer or other reactant Plastics (15) 31 December 2028 1118 condensation products of sorbitol and/or ethylene oxide Additive Plastics Provided that the product does not release ethylene glycol. 31 December 2028 1119 copolymer of methylmethacrylate with divinylbenzene Monomer or other reactant Plastics 31 December 2028 1120 copolymer of methylmethacrylate with styrene, divinylbenzene and 1,3-butylene glycol-dimethacrylate Monomer or other reactant Plastics 31 December 2028 1121 copolymer of methylmethacrylate-butadiene-styrene-divinylbenzene Monomer or other reactant Plastics 31 December 2028 1122 54453-03-1 copper ethylenediaminetetraacetate Additive Plastics EDTA MTCtap = 60 μg/l. For copper, refer to Annex V. 31 December 2028 1123 630-372-5 73728-37-7 cyclised rubber Additive Rubber 31 December 2028 1124 203-630-6 108-93-0 cyclohexylalcohol Additive Polymer production aid Rubber 31 December 2031 1125 226-733-8 5459-93-8 cyclohexylethylamine Monomer or other reactant Rubber 31 December 2031 1126 - 29965-97-7 cyclooctadiene Monomer or other reactant Rubber 31 December 2028 1127 cyclopentadiene Monomer or other reactant Rubber 31 December 2031 1128 248-523-5 27554-26-3 di isooctyl phthalate Additive Plastics Maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg. 31 December 2028 1129 236-445-4 13372-18-4 dicetyl phthalate Additive Plastics 75 For rigid PVC, maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg. 31 December 2028 1130 237-971-7 14117-96-5 distearyl phthalate Additive Plastics 75 For rigid PVC, maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg. 31 December 2028 1131 diethoxydihydroquinone Monomer or other reactant Rubber 50 Phenols MTCtap = 50 μg/l. 31 December 2028 1132 diethylphthalate Additive Plastics, rubber Maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg. 31 December 2031 1133 205-450-3 141-04-8 diisobutyladipate Additive Plastics, rubber 150 31 December 2031 1134 247-977-1 26761-40-0 diisodecylphthalate Additive Plastics, rubber Maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg. 31 December 2028 1135 204-212-6 117-82-8 dimethoxyethylphthalate Additive Plastics Maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg. 31 December 2028 1136 dimethyl ester of polycondensed succinic acid with 2-(4-hydroxy-2,2,6,6-tetramethyl-1-piperidyl)-ethanol Additive Plastics For polyethylene, maximum residual content of the sum of all phthalates in the final material (QM) = 3000 mg/kg. For polypropylene, maximum residual content of the sum of all phthalates in the final material (QM) = 5000 mg/kg. 31 December 2028 1137 248-765-1 27987-25-3 dimethylcyclohexylphthalate Additive Plastics Maximum residual content of the sum of all phthalates in the final material (QM) = 50000 mg/kg. 31 December 2031 1138 dimethylphenylthiuram Aid to polymerisation Rubber (42) 31 December 2028 1139 203-664-1 109-31-9 di-n-hexylazelate Additive Plastics 31 December 2028 1140 202-577-6 97-39-2 di-o-tolylguanidine Monomer or other reactant Rubber 31 December 2031 1141 disproportionated rosin Additive Polymer production aid Rubber 31 December 2031 1142 distearyl-(4-hydroxy-3-methyl-5-tert-butyl)-benzyl-malonate Additive Plastics Maximum residual content in the final material (QM) = 5000 mg/kg. 31 December 2028 1143 201-555-3 84-72-0 ethyl phthalyl ethyl glycolate Additive Plastics 31 December 2031 1144 106-90-1 acrylic acid, 2,3-epoxypropyl ester Additive Rubber (21) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1145 high, medium and low density polyethylene Monomer or other reactant Plastics 31 December 2028 1146 hydrogenated polycyclopentadiene resin Monomer or other reactant Plastics 31 December 2028 1147 isodecyl alcohol Additive Polymer production aid Plastics, rubber 31 December 2028 1148 lauryldithiopropionate Additive Rubber 31 December 2028 1149 12068-40-5 lithium aluminium silicate (2:1:1) Additive Plastics For aluminium and lithium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1150 melamine resins modified with butyl alcohol Monomer or other reactant Rubber For paints and varnishes. 31 December 2028 1151 694-91-7 5-methylene-2-norbornene Monomer or other reactant Rubber 31 December 2028 1152 639-976-3 68441-63-4 methylhydroxyethylcellulose Additive Plastics 31 December 2028 1153 - 51064-12-1 methylpentadiene Monomer or other reactant Rubber 31 December 2028 1154 n-decyl n-octyl phthalate Additive Plastics (25) (27) 31 December 2028 1155 di-n-decyl phthalate Additive Plastics (25) (27) 31 December 2031 1156 Triethanolamine monolaurate Additive Plastics Use as an antistatic for polyolefins, maximum residual content in the final material (QM) = 3000 mg/kg. 31 December 2028 1157 200-820-0 74-89-5 Monomethylamine Additive Plastics 2,5 Used with dimethyl carbonate in the manufacture of modified polymethacrylate. 31 December 2031 1158 260-982-3 57843-53-5 N,N,N',N'-tetrakis (2-hydroxypropyl)-adipamide Monomer or other reactant Additive Polymer production aid Aid to polymerisation Rubber For the production of polymer dispersions of polyolefins functionalised with acrylic and/or anhydride groups, used as coatings on metals, at a use rate of ≤ 6 % by dry weight of the dispersion. 31 December 2031 1159 N-octadecyl-beta (4'-hydroxy-3,5-di-tert-butylenyl)-propionate Additive Rubber 31 December 2028 1160 230-451-0 7144-65-2 ortho-diphenylglycidyl ether Additive Plastics For films of vinyl chloride-vinylidene chloride copolymers, maximum residual content in the final material (QM) = 3000 mg/kg. 31 December 2028 1161 241-313-4 17281-74-2 palmitoyl benzoyl methane Additive Plastics For rigid PVC and its copolymers, maximum residual content in the final material (QM) = 5000 mg/kg. 31 December 2028 1162 204-259-2 118-55-8 phenyl salicylate Additive Plastics 31 December 2031 1163 70750-58-2 polybetapinene Additive Rubber 31 December 2034 1164 polybutylene terephthalate Additive Polymer production aid Plastics 31 December 2037 1165 polychlorotrifluoroethylene Monomer or other reactant Plastics (38) 31 December 2028 1166 polyester derived from the condensation of adipic acid and ethylene glycol Monomer or other reactant Plastics (2) 31 December 2028 1167 607-461-2 24938-37-2 polyethylene adipate Additive Plastics 31 December 2034 1168 9004-99-3 polyethylene glycol monostearate Additive Plastics (2) Provided that the product does not release mono- and diethylene glycols. 31 December 2037 1169 polyethylene glycol terephthalate Monomer or other reactant Plastics (2) 31 December 2028 1170 36221-42-8 polypropylene adipate Additive Plastics 31 December 2028 1171 9003-20-7 polyvinyl acetate Monomer or other reactant Plastics, coatings 31 December 2037 1172 polyvinyl butyral Monomer or other reactant Plastics, coatings 31 December 2028 1173 polyvinyl chloride Monomer or other reactant Plastics 31 December 2037 1174 polyvinyl ethyl ether Additive Plastics, adhesives, coatings Viscosity 0,5-0,8 cP at 1 % in benzene at 20 °C. 31 December 2028 1175 9003-44-5 polyvinyl isobutyl ether Monomer or other reactant Plastics 31 December 2028 1176 polyvinyl tert-butyl ether Monomer or other reactant Plastics 31 December 2028 1177 9002-85-1 polyvinylidene chloride Monomer or other reactant Plastics 31 December 2037 1178 potassium salt of maleic acid semiesterified with cetyl alcohol Additive Plastics 31 December 2028 1179 Reaction product of 4-methylphenol with dicyclopentadiene and subsequent alkylation with isobutyl Additive Rubber 1500 31 December 2028 1180 Reaction product of N-phenyl-N'-(1-3-dimethylbutyl)p-phenylenediamine and tert-C10-C13 glycidyl thioether with predominantly C12 content Additive Rubber 1,0 - expressed as primary aromatic amines Maximum dosage = 2,4 % (w/w). Only for contact times ≤ 10 min and temperatures ≤ 40 °C. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1181 268-213-3 68037-49-0 sodium alkyl (C10-C18) sulfonate Additive Plastics Use as an antistatic agent in PVC, maximum residual content in the final material (QM) = 15000 mg/kg. Use as an antistatic agent in polystyrene, maximum residual content in the final material (QM) = 25000 mg/kg. Use as an emulsifying agent in PVC and its copolymers, maximum residual content in the final material (QM) = 20000 mg/kg. Use as an emulsifying agent in polystyrene, maximum residual content in the final material (QM) = 50000 mg/kg. 31 December 2028 1182 209-406-4 577-11-7 sodium dioctylsulfosuccinate Additive Plastics For polyethylene, maximum residual content in the final material (QM) = 10000 mg/kg. 31 December 2031 1183 sodium dodecylbenzenesulfonate Additive Plastics In the case of gaskets and mastics, maximum residual content in the final material (QM) = 20000 mg/kg. 31 December 2031 1184 29704-46-9 sodium sulforicinate Additive Plastics 31 December 2028 1185 205-481-2 205-777-1 141-33-3 150-88-9 sodium butylxanthogenate Monomer or other reactant Rubber (47) 31 December 2028 1186 zinc butylxanthogenate Monomer or other reactant Rubber (47) For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1187 205-440-9 140-90-9 sodium ethylxanthogenate Monomer or other reactant Rubber (47) 31 December 2031 1188 zinc ethylxanthogenate Monomer or other reactant Rubber (47) For zinc, refer to Annex V. 31 December 2028 1189 sodium isopropylxanthogenate Monomer or other reactant Rubber (47) 31 December 2028 1190 zinc isopropylxanthogenate Monomer or other reactant Rubber (47) For zinc, refer to Annex V. 31 December 2028 1191 sodium methylxanthogenate Monomer or other reactant Rubber (47) 31 December 2028 1192 zinc methylxanthogenate Monomer or other reactant Rubber (47) For zinc, refer to Annex V. 31 December 2028 1193 sodium pentamethylenxanthogenate Monomer or other reactant Rubber (47) 31 December 2028 1194 zinc pentamethylenxanthogenate Monomer or other reactant Rubber (47) For zinc, refer to Annex V. 31 December 2028 1195 sodium dibutyldithiocarbamate Aid to polymerisation Rubber (42) 31 December 2031 1196 zinc dibutyldithiocarbamate Aid to polymerisation Rubber (42) For zinc, refer to Annex V. 31 December 2028 1197 copper dibutyldithiocarbamate Aid to polymerisation Rubber (42) For copper, refer to Annex V. 31 December 2028 1198 sodium diethyldithiocarbamate Aid to polymerisation Rubber (42) 31 December 2031 1199 13681-87-3 copper diethyldithiocarbamate Aid to polymerisation Rubber (42) For copper, refer to Annex V. 31 December 2028 1200 sodium dimethyldithiocarbamate Aid to polymerisation Rubber (42) 31 December 2031 1201 137-29-1 copper dimethyldithiocarbamate Aid to polymerisation Rubber (42) For copper, refer to Annex V. 31 December 2031 1202 sodium ethylphenyldithiocarbamate Aid to polymerisation Rubber (42) 31 December 2028 1203 238-677-1 14634-93-6 zinc ethylphenyldithiocarbamate Aid to polymerisation Rubber (42) For zinc, refer to Annex V. 31 December 2031 1204 copper ethylphenyldithiocarbamate Aid to polymerisation Rubber (42) For copper, refer to Annex V. 31 December 2028 1205 13878-54-1 zinc pentamethylenedithiocarbamate Aid to polymerisation Rubber (42) For zinc, refer to Annex V. 31 December 2028 1206 copper pentamethylenedithiocarbamate Aid to polymerisation Rubber (42) For copper, refer to Annex V. 31 December 2028 1207 232-360-1 8007-43-0 sorbitan sesquioleate Additive Plastics 31 December 2031 1208 229-781-8 6729-96-0 stearyl dithiopropionate Additive Rubber 31 December 2028 1209 stearyl-(3,5-dimethyl-4-hydroxy-benzyl)thioglycolate Additive Plastics Maximum residual content in the final material (QM) = 5000 mg/kg. 31 December 2028 1210 202-387-3 95-05-6 tetraethylthiuram monosulfide Monomer or other reactant Aid to polymerisation Rubber (42) 31 December 2028 1211 203-841-3 111-17-1 thiodipropionic acid Additive Rubber (14) 31 December 2031 1212 triacetin Additive Plastics 31 December 2031 1213 201-071-2 77-94-1 tributylcitrate Additive Plastics 31 December 2031 1214 tris-(2,4-di-tert-butyl phenyl) diphosphite Additive Rubber For the MTCtap values of degradation products, refer to Table 4. 31 December 2028 1215 1184-84-5 vinylsulfonic acid Monomer or other reactant Rubber 31 December 2028 1216 vinylsulfonic amide Monomer or other reactant Rubber 31 December 2028 1217 232-723-4 9010-69-9 zinc resinate Additive Plastics For zinc, refer to Annex V. 31 December 2028 1218 78-67-1 2,2'-azobis(isobutyronitrile) Aid to polymerisation Plastics Maximum dosage = 0,2 % (w/w). 31 December 2031 1219 2372-21-6 tert-butylperoxy isopropyl carbonate Polymer production aid Aid to polymerisation Plastics 0,1 Maximum dosage = 0,5 % (w/w). 31 December 2031 1220 111-92-2 di-n-butylamine Aid to polymerisation Plastics, rubber 1,0 31 December 2031 1221 113693-69-9 tetramethyl-bis(4-hydroxyphenyl)methane (TMBPF), reaction product with epichlorohydrin (= TMBPF-diglycidyl ether or TMBPF-DGE) Monomer or other reactant Coatings Epichlorohydrin MTCtap = 0.1 μg/l. (48) (49) 31 December 2028 1222 3844-45-9 C.I. Food Blue 2 (or: triarylmethane; C.I. No 42090) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1223 1934-21-0 C.I. Food Yellow 4 (or: tartrazine (E102); C.I. No 19140) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1224 12227-89-3; 1317-61-9 C.I. Pigment Black 11 (or: iron oxide black; C.I. No 77499) Additive All For iron, refer to Annex V. 31 December 2028 1225 68186-91-4 C.I. Pigment Black 28 (or: copper chromite; C.I. No 77428) Additive All For chromium and copper, refer to Annex V. 31 December 2031 1226 12062-81-6 C.I. Pigment Black 33, (or: iron manganese trioxide; C.I. No 77537) Additive All For iron and manganese, refer to Annex V. 31 December 2031 1227 147-14-8 C.I. Pigment Blue 15 (or: phthalocyanine blue (incl. 15:1, 15:2, 15:3, 15:4); C.I. No. 74160) Additive All For copper, refer to Annex V. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1228 1345-16-0 C.I. Pigment Blue 28 (or: cobalt aluminate; C.I. No. 77346) Additive All For aluminium and cobalt, refer to Annex V. 31 December 2031 1229 57455-37-5 C.I. Pigment Blue 29 (or: ultramarine blue; C.I. No. 77007) Additive All For aluminium, refer to Annex V. 31 December 2028 1230 68187-11-1 C.I. Pigment Blue 36 (or: cobalt chromite; C.I. No. 77343) Additive All For aluminium, chromium and cobalt, refer to Annex V. 31 December 2031 1231 68412-74-8 C.I. Pigment Blue 74 (or: cobalt zinc silicate; C.I. No. 77366) Additive All For cobalt and zinc, refer to Annex V. 31 December 2031 1232 12068-86-9 C.I. Pigment Brown 11 (or: magnesium ferrite; C.I. No. 77495) Additive All For iron, refer to Annex V. 31 December 2031 1233 68186-90-3 C.I. Pigment Brown 24 (or: chromium antimony titanate; C.I. No. 77310) Additive All For antimony and chromium, refer to Annex V. 31 December 2031 1234 12737-27-8 C.I. Pigment Brown 29 (or: chromium iron oxide; C.I. No. 77500) Additive All For chromium and iron, refer to Annex V. 31 December 2031 1235 1308-38-9 C.I. Pigment Green 17 (or: chromium(III)oxide; C.I. No. 77288) Additive All For chromium, refer to Annex V. 31 December 2031 1236 1328-53-6 C.I. Pigment Green 7 (or: phthalocyanine green; C.I. No. 74260) Additive All For copper, refer to Annex V. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1237 3520-72-7 C.I. Pigment Orange 13 (or: diazo ; C.I. No. 21110) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1238 1309-37-1 C.I. Pigment Red 101 (or: iron(III)oxide; C.I. No. 77491) Additive All 31 December 2031 1239 12656-85-8 C.I. Pigment Red 104 (or: lead chromate/molybdate/sulfate; C.I. No. 77605) Additive All 31 December 2028 1240 3049-71-6 C.I. Pigment Red 178 (or: perylene red) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1241 40618-31-3 82643-43-4 C.I. Pigment Red 214 (or: condensation azo) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1242 52238-92-3 C.I. Pigment Red 242 (or: disazo condensation; C.I. No. 20067) Additive All (38) Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1243 43035-18-3 C.I. Pigment Red 247 (or: monoazo; C.I. No. 15915) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1244 6358-87-8 C.I. Pigment Red 38 (or: diazo; C.I. No. 21120) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1245 5281-04-9 C.I. Pigment Red 57:1 (D & C Red 7) (or: monoazo; C.I. No. 15850:1) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1246 12769-96-9 C.I. Pigment Violet 15 (or: ultramarine violet; C.I. No. 77007) Additive All 31 December 2028 1247 6358-30-1 C.I. Pigment Violet 23 (or: oxazine; C.I. No. 51319) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1248 1345-05-7 C.I. Pigment White 5 (or: lithopone (coprecipitate of barium sulfate and zinc sulfide) ; C.I. No. 77115 Additive All 31 December 2028 1249 5590-18-1 C.I. Pigment Yellow 110 (or: aminoketone; C.I. No. 56280) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1250 269-103-8 68187-51-9 C.I. Pigment Yellow 119 (or: zinc ferrite; C.I. No. 77496) Additive All 31 December 2031 1251 603-331-4 129423-54-7 C.I. Pigment Yellow 191 (or: monoazo; C.I. No. 18795) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1252 232-353-3 8007-18-9 C.I. Pigment Yellow 53 (or: nickel antimony titanate; C.I. No. 77788) Additive All 31 December 2031 1253 6528-34-3 C.I. Pigment Yellow 65 (or: monoazo; C.I. No. 11740) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1254 8005-02-5 C.I. Solvent Black 7 (or: azine; C.I. No. 50415:1) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1255 201-353-5 81-48-1 C.I. Solvent Violet 13 (or: anthraquinone; C.I. No. 60725) Additive All Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1256 109-58-0 (2-aminoethyl)carbamic acid Aid to polymerisation Rubber Only to be used in elastomers having vinylidene fluoride as a monomer. Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2028 1257 36-86-8 1,1-bis(tert-butylperoxy)cyclohexane Aid to polymerisation Rubber 0,1 31 December 2031 1258 95-35-2 1,3-bis(2-benzothiazolylmercaptomethyl) urea Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1259 2212-81-9 1,3-bis(tert-butylperoxyisopropyl)benzene Aid to polymerisation Rubber 0,1 In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1260 105-55-5 1,3-diethylthiourea Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1261 7691-02-3 1,3-divinyltetramethyldisilazane Additive Rubber 31 December 2031 1262 102-78-3 2-(2,6-dimethylmorpholinothio) benzthiazole Aid to polymerisation Rubber (43) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1263 102-77-2 2-(morpholinothio)benzothiazole Aid to polymerisation Rubber 150 (43) Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2031 1264 87-97-8 2,6-di-tert-butyl-4-(methoxymethyl)phenol Additive Rubber For the MTCtap values of degradation products, refer to Table 4. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1265 2668-47-5 2,6-di-tert-butyl-4-phenylphenol Additive Rubber For the MTCtap values of degradation products, refer to Table 4. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1266 95-30-7 2-benzothiazyl-N,N-diethylthiocarbamyl sulfide Aid to polymerisation Rubber (43) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1267 96-45-7 2-mercaptoimidazoline Aid to polymerisation Rubber 2,5 Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2028 1268 26511-61-5 3,3-bis(tert-butylperoxy)butanoic acid, n-butyl ester Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1269 19262-37-4 4,4'-bis(aminocyclohexyl)methane carbamate Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1270 101-70-2 4,4'-dimethoxydiphenylamine Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1271 95-80-7 4-methyl-m-phenylenediamine Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1272 15570-10-2 4-tert-butyl-2-methylthiophenol Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1273 4545-30-6 4-tert-butylthiophenol, zinc salt Additive Rubber For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1274 140-04-5 acetylricinoleic acid, butyl ester Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1275 141-17-3 adipic acid, bis[2-(2-butoxyethoxy)-ethyl) ester Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1276 2451-84-5 adipic acid, dibenzyl ester Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1277 105-97-5 adipic acid, didecyl ester Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1278 27178-16-1 adipic acid, diisodecyl ester Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1279 1330-86-5 adipic acid, diisooctyl ester Additive Rubber 31 December 2031 1280 110-29-2 adipic acid, n-decyl n-octyl ester Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1281 123-77-3 azodicarbonamide Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1282 201-255-2 80-17-1 benzenesulfonohydrazide Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1283 bis(2-hydroxy-3-tert-octyl-5-methylphenyl)methane Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1284 246-709-0 25176-75-4 caproic acid, diester with triethyleneglycol Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1285 203-361-4 106-10-5 caprylic acid, diester with triethyleneglycol Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1286 61789-98-8 cork Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1287 3399-73-3 cyclohexylethylamine Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1288 149-82-6 dibutyldithiocarbamic acid, N,N-dimethylcyclohexylamine salt Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1289 109-89-7 diethylamine Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1290 502-55-6 diethylxanthogen disulfide Additive or polymer production aid Rubber (47) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1291 123-81-9 ethyleneglycol bis(mercaptoacetate) Aid to polymerisation Rubber Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2031 1292 36290-04-7 formaldehyde-2-naphthalenesulfonic acid, copolymer, sodium salt Additive Polymer production aid Rubber (15) In rubbers, not for use in products in contact with warm and hot water. 31 December 2034 1293 93-35-4 formaldehyde-phenol, copolymer Additive Rubber (15) The copolymer cannot contain additives that are not listed in the organics EU Positive List. 31 December 2028 1294 68476-37-9 glue, of animal origin Additive or polymer production aid Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1295 16941-12-1 hexachloroplatinic acid Additive or polymer production aid Rubber 31 December 2031 1296 999-97-3 hexamethyldisilazane Additive or polymer production aid Rubber 31 December 2031 1297 143-06-6 hexamethylenediamine carbamate Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1298 213-680-0 1000-90-4 isopropylxanthogenate, zinc salt Aid to polymerisation Rubber (47) For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1299 106-18-3 lauric acid, butyl ester Additive Rubber 31 December 2028 1300 28693-00-7 monochloroacetic acid, ester with 5-(hydroxymethyl)-bicyclo[2.2.1]hept-2-ene Monomer or other reactant Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1301 montan wax, consisting of: 1) montanic acids C26-C32, 2) esters thereof with ethyleneglycol and/or 1,3-butanediol 3) and/or calcium salts Additive Rubber 31 December 2028 1302 10591-84-1 N,N'-dimethyldiphenylthiuram disulfide Aid to polymerisation Rubber (42) Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2031 1303 N-alkyl(C14-C18)-N,N’,N’-triacetoyl-1,3-diaminopropane Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1304 N-phenyl-N’-isohexyl-p-phenylenediamine Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1305 142-77-8 oleic acid, butyl ester Additive Rubber 31 December 2028 1306 7620-75-9 oleic acid, dibutylamine salt Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1307 1912-84-1 oleic acid, tin(II) salt Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1308 117-97-5 pentachlorothiophenol, zinc salt Additive or polymer production aid Rubber For zinc, refer to Annex V. In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1309 98-77-1 pentamethylenedithiocarbamic acid, piperidine salt Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1310 136-04-9 pentamethylenedithiocarbamic acid, potassium salt Aid to polymerisation Rubber (42) For zinc, refer to Annex V. Maximum residual content in the final material (QM) = 30 g/kg. 31 December 2028 1311 107-71-1 peracetic acid, tert-butyl ester Aid to polymerisation Rubber 0,1 In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1312 89-03-8 petrolatum Additive Rubber 31 December 2028 1313 117-84-0 phthalic acid, di-n-octyl ester Additive Rubber 300 (25) (27) 31 December 2028 1314 26762-92-5 p-menthane hydroperoxide Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1315 p-nonylphenyl phosphite, 2,2-bis(3-tert-butyl-4-hydroxyphenyl) propane ester Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1316 25101-03-5 polypropyleneglycol adipate Additive Rubber (30) 31 December 2037 1317 232-299-0 8002-13-9 rapeseed oil Additive Rubber 31 December 2028 1318 27214-90-0 sebacic acid, diisooctyl ester Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1319 2432-87-3 sebacic acid, di-n-octyl ester Additive Rubber 31 December 2031 1320 1344-08-7 sodium polysulfide Additive or polymer production aid Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1321 soybean oil, sulfur treated (factice) Additive Rubber 250 31 December 2028 1322 93-73-2 tetrabutylthiuram monosulfide Aid to polymerisation Rubber (42) In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1323 7772-99-8 tin chloride Aid to polymerisation Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1324 19484-26-5 tridecyl mercaptan Additive or polymer production aid Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1325 117-56-8 triethanolamine phosphate Additive Rubber 500 Only to be used in mould release agents. 31 December 2028 EUPL Number EC Number CAS Number FCM substance Number (A) Starting substance group name Technical function (B) Drinking water contact materials (C) Maximum Tolerable Concentration at the tap in organic materials (MTCtap, organics) in μg/l Total Maximum Tolerable Concentration at the tap (MTC(T)tap, organics) in μg/l (D) Conditions of use Expiry date Value for the starting substance Values for other relevant chemical species (E) 1326 3 alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C22) Monomer or other reactant All 31 December 2031 1327 4 mixture of (40 % w/w) 2,2,4- trimethylhexane–1,6-diisocyanate and (60 % w/w) 2,4,4-trimethylhexane–1,6-diisocyanate Monomer or other reactant All (16) Maximum residual content in the final material (QM) = 1 mg/kg in final product expressed as isocyanate moiety. Verification of compliance by residual content per food contact surface area (QMA). 31 December 2034 1328 5 trialkyl(C5-C15) acetic acid, 2,3- epoxypropyl ester Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product expressed as epoxy group. Molecular weight of the epoxy group is 43 Da. 31 December 2031 1329 6 trialkyl acetic acid (C7-C17), vinyl esters Monomer or other reactant All 2,5 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2031 1330 8 acetylated mono- and diglycerides of fatty acids Additive or polymer production aid All (31) 31 December 2031 1331 9 acids, C2-C24, aliphatic, linear, monocarboxylic from natural oils and fats, and their mono-, di- and triglycerol esters (branched fatty acids at naturally occurring levels are included) Polymer production aid Other (processing aid) All 31 December 2031 1332 10 acids, C2-C24, aliphatic, linear, monocarboxylic, synthetic and their mono-, di- and triglycerol esters Polymer production aid Additive Other (processing aid) All 31 December 2031 1333 11 acids, aliphatic, monocarboxylic (C6-C22), esters with polyglycerol Additive or polymer production aid All 31 December 2034 1334 12 acids, fatty, from animal or vegetable food fats and oils Additive or polymer production aid Other (processing aid) All 31 December 2031 1335 13 alcohols, aliphatic, monohydric, saturated, linear, primary (C4-C24) Additive or polymer production aid All 31 December 2031 1336 14 n-alkyl(C10-C13)benzenesulfonic acid Additive Polymer production aid All 1500 31 December 2031 1337 15 alkyl, linear with even number of carbon atoms (C12-C20) dimethylamines Additive or polymer production aid All 1500 31 December 2031 1338 16 alkyl(C8-C22)sulfonic acids Additive Polymer production aid All 300 31 December 2031 1339 17 alkyl(C8-C22)sulfuric acids, linear, primary with an even number of carbon atoms Additive or polymer production aid All 31 December 2031 1340 19 N,N-bis(2-hydroxyethyl)alkyl (C8-C18)amine Additive Polymer production aid All (7) 31 December 2031 1341 20 N,N-bis(2-hydroxyethyl)alkyl (C8-C18)amine hydrochlorides Additive or polymer production aid All (7) 31 December 2031 1342 22 castor oil, mono- and diglycerides Additive or polymer production aid All 31 December 2031 1343 23 chlorides of choline esters of coconut oil fatty acids Additive or polymer production aid All 45 Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2031 1344 25 cresols, butylated, styrenated Additive or polymer production aid All 600 31 December 2031 1345 26 5,7-di-tert-butyl-3-(3,4- and 2,3-dimethylphenyl)-3H-benzofuran-2-one containing: a) 5,7-di-tert-butyl-3-(3,4-dimethylphenyl)-3H-benzofuran-2-one (80 to 100 % w/ w) and b) 5,7-di-tert-butyl-3-(2,3-dimethylphenyl)-3H-benzofuran-2-one (0 to 20 % w/w) Additive or polymer production aid All 250 31 December 2031 1346 27 9,10-dihydroxy stearic acid and its oligomers Additive or polymer production aid All 250 31 December 2028 1347 28 di-n-octyltin bis(n-alkyl(C10-C16) mercaptoacetate) Additive or polymer production aid All (10) 31 December 2031 1348 31 di-n-octyltin dimaleate, esterified Additive or polymer production aid All (10) 31 December 2031 1349 38 glass fibres Additive All Glass according to Annex IV. 31 December 2031 1350 40 glycerol, esters with acetic acid Additive or polymer production aid All 31 December 2031 1351 41 glycerol, esters with acids, aliphatic, saturated, linear, with an even number of carbon atoms (C14-C18) and with acids, aliphatic, unsaturated, linear, with an even number of carbon atoms (C16-C18) Additive or polymer production aid All 31 December 2031 1352 42 glycerol, esters with butyric acid Additive or polymer production aid All 31 December 2031 1353 43 glycerol, esters with erucic acid Additive or polymer production aid All 31 December 2031 1354 44 glycerol, esters with 12-hydroxystearic acid Additive or polymer production aid All 31 December 2031 1355 45 glycerol, esters with lauric acid Additive or polymer production aid All 31 December 2031 1356 46 glycerol, esters with linoleic acid Additive or polymer production aid All 31 December 2031 1357 47 glycerol, esters with myristic acid Additive or polymer production aid All 31 December 2031 1358 48 glycerol, esters with nonanoic acid Additive or polymer production aid All 31 December 2031 1359 49 glycerol, esters with oleic acid Polymer production aid Other (processing aid) All 31 December 2031 1360 50 glycerol, esters with palmitic acid Additive or polymer production aid All 31 December 2031 1361 51 glycerol, esters with propionic acid Additive or polymer production aid All 31 December 2031 1362 52 glycerol, esters with ricinoleic acid Additive or polymer production aid All 31 December 2031 1363 53 glycerol, esters with stearic acid Additive or polymer production aid All 31 December 2031 1364 65 mixture of 4-(2-benzoxazolyl)-4′-(5-methyl-2-benzoxazolyl)stilbene, 4,4′-bis(2-benzoxazolyl) stilbene and 4,4′-bis(5-methyl-2-benz oxazolyl)stilbene Additive All Not more than 0,05 % (w/w) (quantity of substance used/ quantity of the formulation). Mixture obtained from the manufacturing process in the typical ratio of (58-62 %):(23-27 %): (13-17 %). 31 December 2031 1365 66 mono-n-octyltin tris(alkyl (C10-C16) mercaptoacetate) Additive or polymer production aid All (11) 31 December 2031 1366 67 montanic acids and/or their esters with ethyleneglycol and/or with 1,3-butanediol and/or with glycerol Polymer production aid Other (processing aid) All 31 December 2031 1367 68 phosphoric acid, mono- and di-n-alkyl (C16 and C18) esters Additive or polymer production aid All 2,5 31 December 2031 1368 69 phosphorous acid, tris(nonyl-and/ or dinonylphenyl) ester Additive All 1500 In the absence of plasticiser, maximum residual content in the final material (QM) = 3000 mg/kg. For butadiene-styrene copolymer, maximum residual content in the final material (QM) = 15000 mg/kg. 31 December 2028 1369 73 polyesters of 1,2-propanediol and/ or 1,3- and/or 1,4-butanediol and/ or polypropyleneglycol with adipic acid, which may be end-capped with acetic acid or fatty acids C12-C18 or n-octanol and/or n-decanol Additive or polymer production aid All (30) (31) 31 December 2034 1370 78 polyethyleneglycol (EO = 1-50) monoalkylether (linear and branched, C8-C20) sulfate, salts Additive or polymer production aid All 250 31 December 2034 1371 80 powders, flakes and fibres of brass, bronze, copper, stainless steel, tin, iron and alloys of copper, tin and iron Additive All For relevant elements, refer to Annex V. 31 December 2031 1372 89 stearic acid, esters with ethyleneglycol Additive or polymer production aid All (2) 31 December 2031 1373 50-21-5 99 lactic acid Monomer or other reactant Polymer production aid Other (processing aid) All 31 December 2034 1374 50-99-7 102 glucose Monomer or other reactant All 31 December 2037 1375 57-55-6 109 1,2-propanediol Monomer or other reactant Additive Polymer production aid All 31 December 2034 1376 59-02-9 10191-41-0 110 α-tocopherol Polymer production aid Other (processing aid) All 31 December 2034 1377 75-56-9 135 propylene oxide Monomer or other reactant All 0,1 Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2028 1378 107-01-7 224 2-butene Monomer or other reactant All 31 December 2034 1379 107-88-0 228 1,3-butanediol Monomer or other reactant All 31 December 2034 1380 110-98-5 25265-71-8 257 dipropyleneglycol Monomer or other reactant All 31 December 2034 1381 138-22-7 322 lactic acid, butyl ester Additive or polymer production aid All 31 December 2031 1382 598-32-3 357 3-buten-2-ol Monomer or other reactant All 0,1 Only to be used as a co-monomer for the preparation of polymeric additive. Verification of compliance by residual content per water contact surface area (QMA) pending the availability of an analytical method. 31 December 2028 1383 1330-43-4 407 sodium tetraborate Additive or polymer production aid All For boron, refer to Annex V. 31 December 2034 1384 1332-37-2 409 iron oxide Additive All For iron, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1385 3724-65-0 467 crotonic acid Monomer or other reactant Additive All (34) 31 December 2028 1386 4080-31-3 474 1-(3-chloroallyl)-3,5,7-triaza-1-azoniaadamantane chloride Additive or polymer production aid All 15 31 December 2031 1387 501 aluminium fibres, flakes and powders Additive All For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1388 7631-86-9 504 silicon dioxide Additive Polymer production aid All For synthetic amorphous silicon dioxide: primary particles of 1 – 100 nm which are aggregated to a size of 0,1 – 1 μm which may form agglomerates within the size distribution of 0,3 μm to the mm size. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 1389 7664-93-9 511 sulfuric acid Additive Polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1390 7704-34-9 514 sulfur Aid to polymerisation All 31 December 2034 1391 7771-44-0 518 arachidonic acid Monomer or other reactant All 31 December 2028 1392 7772-98-7 519 sodium thiosulfate Additive or polymer production aid All (18) 31 December 2034 1393 9003-11-6 106392-12-5 551 poly(ethylene propylene) glycol Other (processing aid) All 31 December 2028 1394 63148-62-9 575 polydimethylsiloxane (MW > 6800 Da) Monomer or other reactant (base oil) Additive Polymer production aid Other (processing aid) All Viscosity at 25 °C not less than 100 cSt (100 × 10-6 m2/s). 31 December 2034 1395 10377-51-2 588 lithium iodide Additive or polymer production aid All (6) For lithium, refer to Annex V. 31 December 2031 1396 11104-61-3 593 cobalt oxide Additive or polymer production aid All For cobalt, refer to Annex V. 31 December 2031 1397 11129-60-5 594 manganese oxide Additive All For manganese, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1398 12004-14-7 37293-22-4 598 calcium sulfoaluminate Additive All For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1399 12626-88-9 606 manganese hydroxide Additive or polymer production aid All For manganese, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1400 12751-22-3 607 iron phosphide Additive or polymer production aid Plastics For iron, refer to Annex V. Only to be used in PET polymers and copolymers. 31 December 2031 1401 13463-67-7 610 titanium dioxide Additive Polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1402 17194-00-2 625 barium hydroxide Additive or polymer production aid All For barium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1403 25013-16-5 635 tert-butyl-4-hydroxyanisole Additive All 1500 31 December 2031 1404 25322-68-3 638 polyethyleneglycol Monomer or other reactant Additive Polymer production aid Aid to polymerisation Other (processing aid) All 31 December 2034 1405 25513-64-8 641 mixture of (35-45 % w/w) 1,6-diamino-2,2,4-trimethylhexane and (55-65 % w/w)1,6-diamino-2,4,4-trimethylhexane Monomer or other reactant All 2,5 31 December 2034 1406 68515-48-0 28553-12-0 728 phthalic acid, diesters with primary, saturated C8-C10 branched alcohols, more than 60 % C9 Additive or polymer production aid All (25) (31) Only to be used as: 31 December 2037 1407 68855-54-9 734 diatomaceous earth, soda ash flux-calcined Additive or polymer production aid All If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1408 73138-82-6 741 resin acids and rosin acids Monomer or other reactant Other (processing aid) All 31 December 2031 1409 789 hydrogenated homopolymers and/or copolymers made of 1-hexene and/or 1-octene and/or 1-decene and/or 1-dodecene and/or 1-tetradecene (MW: 440–12000) Additive or polymer production aid All Average molecular weight not less than 440 Da. Viscosity at 100 °C not less than 3,8 cSt (3,8 × 10-6 m2/s). 31 December 2034 1410 90751-07-8 82451-48-7 790 poly(6-morpholino-1,3,5-triazine- 2,4-diyl)-[(2,2,6,6-tetramethyl-4- piperidyl)imino)] hexa-methylene- [(2,2,6,6-tetramethyl-4-piperidyl)imino)] Additive Polymer production aid All 250 Average molecular weight not less than 2400 Da. Residual content of morpholine < 30 mg/kg, of N,N′-bis(2,2,6,6-tetramethylpiperidin-4-yl)hexane–1,6-diamine < 15000 mg/kg, and of 2,4-dichloro-6-morpholino-1,3,5-triazine < 20 mg/kg. 31 December 2034 1411 799 polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C8-C22) alcohols Polymer production aid Other (processing aid) All 90 In compliance with the maximum ethylene oxide content as laid down in the purity criteria for food additives in Commission Regulation (EU) No 231/2012. 31 December 2037 1412 801 acids, C2-C24, aliphatic, linear, monocarboxylic, from natural oils and fats, lithium salt Additive or polymer production aid All For lithium, refer to Annex V. 31 December 2031 1413 805 titanium dioxide, coated with a copolymer of n-octyltrichlorosilane and [aminotris(methylenephosphonic acid), penta sodium salt] Additive or polymer production aid All The content of the surface treatment copolymer of the coated titanium dioxide is less than 1 % w/w. 31 December 2031 1414 810 neopentyl glycol, diesters and monoesters with benzoic acid and 2-ethylhexanoic acid Additive or polymer production aid All 250 (31) 31 December 2031 1415 815 trimethylolpropane, mixed triesters and diesters with benzoic acid and 2-ethylhexanoic acid Additive or polymer production aid All 250 (31) 31 December 2031 1416 878 acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with branched alcohols, aliphatic, monohydric, saturated, primary (C3-C22) Additive or polymer production aid All 31 December 2031 1417 879 acids, fatty (C8-C22) from animal or vegetable fats and oils, esters with alcohols, linear, aliphatic, monohydric, saturated, primary (C1-C22) Additive or polymer production aid All 31 December 2031 1418 880 acids, fatty (C8-C22), esters with pentaerythritol Polymer production aid Other (processing aid) All 31 December 2031 1419 128-44-9 902 1,2-benzisothiazol-3(2H)-one 1,1-dioxide, sodium salt Additive or polymer production aid All The substance shall comply with the specific purity criteria as set out in Commission Regulation (EU) No 231/2012. 31 December 2034 1420 924 trimethylolpropane, mixed triesters and diesters with n-octanoic and n-decanoic acids Additive or polymer production aid Plastics 2,5 Only for use in PET. 31 December 2037 1421 939402-02-5 974 phosphorous acid, mixed 2,4-bis(1,1-dimethylpropyl)phenyl and 4-(1,1-dimethylpropyl)phenyl triesters Additive or polymer production aid All 500 - expressed as the sum of the phosphite and phosphate forms of the substance, 4-tert-amylphenol and 2,4-di-tert-amylphenol 50 - for 2,4-di-tert-amylphenol 31 December 2037 1422 1046 zinc oxide, nanoparticles, coated with [3-(methacryloxy)propyl] trimethoxysilane (EUPL No 0695) Additive or polymer production aid Plastics For zinc, refer to Annex V. Only to be used in unplasticised polymers. The restrictions and specifications specified for substance with EUPL Number 0695 shall be respected. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2037 1423 1053 fatty acids, C16-C18 saturated, esters with dipentaerythritol Additive or polymer production aid All Only to be used when produced from a fatty acid precursor that is obtained from edible fats or oils. 31 December 2037 1424 7695-91-2 58-95-7 1055 α-tocopherol acetate Additive or polymer production aid Plastics Only to be used as antioxidant in polyolefins. The substance or its hydrolysis products are authorised food additives and compliance with Article 11(3) of Commission Regulation (EU) No 10/2011 shall be verified. 31 December 2037 1425 1062 mixture composed of 97 % tetraethyl orthosilicate (TEOS) with CAS No. 78-10-4 and 3 % hexamethyldisilazane (HMDS) with CAS No. 999-97-3 Monomer or other reactant All Only to be used for the production of recycled PET and at up to 0,12 % (w/w). 31 December 2037 1426 1075 montmorillonite clay modified with hexadecyltrimethylammonium bromide Additive or polymer production aid Plastics Only to be used as an additive at up to 4,0 % w/w in polylactic acid for cold water applications. Can form nanoform platelets thinner than 100 nm in one or two dimensions. Such platelets must be aligned parallel to the polymer surface and fully integrated into the polymer. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1427 1077 titanium dioxide surface-treated with fluoride-modified alumina Additive or polymer production aid All Only to be used at up to 25,0 % w/w, including in the nanoform. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1428 castor oil fatty acids, dehydrated Monomer or other reactant Other (processing aid) Rubber, coatings 31 December 2034 1429 61790-39-4 castor oil fatty acids, hydrogenated Monomer or other reactant Additive Coatings, lubricants 31 December 2031 1430 55965-84-9 5-chloro-2-methyl-2H-isothiazol-3-one (CAS No. 26172-55-4) and 2-methyl-2H-isothiazol-3-one (CAS No. 2682-20-4), mixture (3:1) Other (in-can preservative) Coatings 7,5 Restriction = 0,025 mg/dm2. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 3.4 and 4.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1431 68938-15-8 fatty acids, coco hydrogenated Monomer or other reactant Coatings 31 December 2034 1432 110-54-3 n-hexane, incl. structural isomers up to 40% (cyclohexane < 3 %) List No. 925-292-5 Polymer production aid All 250 MTC does not need to be verified when process temperature > 100 °C. 31 December 2031 1433 93685-81-5 isododecane (main isomer: 2,2’,4,6,6’-pentamethylheptane) Polymer production aid Plastics 2,5 31 December 2034 1434 926-099-9 stone wool Additive Rubber Diameter > 1 μm (average diameter 5-30 μm). If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1435 acrylic acid, esters with alcohols, monohydric, aliphatic, saturated, C1-C18 Monomer or other reactant Coatings 300 - expressed as acrylic acid (21) 31 December 2031 1436 adipic acid, esters with alcohols, monohydric, aliphatic, primary, saturated, (C6-C12) Additive Plastics 31 December 2031 1437 addition products of trivinylcyclohexane and alpha, omega-dihydrogen-polyhydrogenmethyldimethylsiloxanes Monomer or other reactant Silicone Maximum dosage = 10% (w/w). 31 December 2031 1438 alkadienes (C3-C8) Monomer or other reactant Coatings Maximum residual content in the final material (QM) = 1 mg/kg in the product. 31 December 2031 1439 alkoxysilanes with functional groups, e.g. vinyl, methacryl, amino or glycidyl groups Polymer production aid Plastics Maximum dosage = 0,5 % (w/w) based on the filler, or maximum 0,3 % (w/w) based on the plastic component 31 December 2031 1440 alkylarylsulfonic acid Polymer production aid Plastics Maximum dosage = 3 % (w/w). 31 December 2031 1441 alkyl(C8-C18)benzene sulfonates, sodium salts Polymer production aid Rubber (41) 31 December 2031 1442 alkyl(C8-C18)naphthalene sulfonates, sodium salts Polymer production aid Rubber (41) 31 December 2031 1443 esters of alkyl(C1-C8)-silicic acid or orthosilicic acid with aliphatic monohydric alcohols (C2-C4) and the monomethyl ether of ethanediol (methylglycol) and their condensation products Aid to polymerisation Silicone Maximum dosage = 3 % (w/w). 31 December 2031 1444 amide of aliphatic carboxylic acids, C8-C22 Polymer production aid Silicone Maximum dosage = 1,5 % (w/w). 31 December 2031 1445 3-aminocrotonic acid, esters with butyleneglycol Additive Coatings 31 December 2031 1446 3-aminocrotonic acid, esters with mono- or dihydric alcohols Additive Coatings 31 December 2031 1447 carbon fibres Additive Rubber Carbon fibres according to EUPL Number 2041, Annex IV. 31 December 2031 1448 condensation products of ethylene oxide with alcohols (C3-C18), phenolalkyl (C4-C9), and their sulfonated, sulfurated or phosphated derivated Additive Polymer production aid Rubber 31 December 2031 1449 cyclic organopolysiloxane with methylgroups, alone or n-alkyl (C2-C32)-group Monomer or other reactant (base oil) Lubricants 31 December 2031 1450 α,ω-dicarboxylic acids (C6-C12), aliphatic, unbranched Monomer or other reactant All 31 December 2031 1451 fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), as compounds with bis(2-hydroxyethyl)amine Additive Polymer production aid Plastics 1500 31 December 2031 1452 fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), amides of Additive Polymer production aid Aid to polymerisation Plastics, rubber 31 December 2031 1453 fatty acids (unbranched, saturated and unsaturated, with an even number of carbon atoms, C8-C22, with a maximum content of 2 % unsaponifiable matter), esterified with alcohols, monohydric, primary, unbranched, saturated, C4-C18, as well as oleyl alcohol Additive Polymer production aid Plastics 31 December 2031 1454 9003-36-5 formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (Novolac glycidyl ether, NOGE) Monomer or other reactant Coatings 2,5 - expressed as the sum of NOGE and its hydrolysis products bisphenol F MTCtap = 2,5 μg/l epichlorohydrin MTCtap = 0,1 μg/l (15) (49) Only to be used in powder coatings. 31 December 2031 1455 glycerol esters with linear fatty acids saturated or not with an even number of carbon C8-C20 and/or adipic acid, citric acid, oxystearin acid and ricinoleic acid Additive Coatings 31 December 2031 1456 methacrylic acid, esters with alcohols, monohydric, aliphatic saturated, C1-C18 Monomer or other reactant Rubber 300 - expressed as methacrylic acid (22) 31 December 2031 1457 mono-n-octyltin tris(maleic acid half ester), prepared with C1-C18, primary, unbranched, saturated alcohols Additive Polymer production aid Plastics (11) 31 December 2031 1458 mono-n-octyltin tris[monoalkyl(C1-C18) maleate] Additive Polymer production aid Plastics (11) 31 December 2031 1459 organopolysiloxanes, containing methylgroups on each silicon atom which can be partially replaced by alkenyl(C2-C32)groups, alkyl (C2-C32)groups, hydroxylgroups, hydrogen, disubstituted alkylamines and/or hydroxylated alkylgroups, acetoxy and/or alkoxy groups and their condensation products with polyethyleneglycol and/or polypropyleneglycol, fluorinated alkylgoups, and phenylgroups Monomer or other reactant Additive (polymeric) Coatings, silicone 31 December 2031 1460 organopolysiloxanes, linear and branched, with methyl groups alone and/or n-alkyl(C2-C32)-, and/or phenyl-2, and/or vinyl-, and/or hydroxyl-, and/or alkoxy(C1-C4)-, and/or hydrogen-, and/or carboalkoxyalkyl(-(CH2)2-17-C(O)-O-(CH2)0-17CH3)-, and/or hydroxyalkyl(C1-C3)-groups Monomer or other reactant Additive (polymeric) Rubber, silicone It may not contain cyclic polysiloxanes that beside the phenyl group bear a hydrogen atom or a methyl group at the same silicon atom. 31 December 2031 1461 organopolysiloxanes, linear or branched, as mentioned PM/REF No. 69848, but in addition with up to max. 5 % hydrogen and/or alkoxy(C2-C4) and/or carboalkoxyalkyl (-(CH2)2-17-C(O)-O-(CH2)0-17CH3)- and/or hydroxyalkyl(C1-C3) groups attached to the silicon atom Monomer or other reactant Additive (polymeric) Rubber, silicone 31 December 2031 1462 organopolysiloxanes, linear or branched and/or cyclic, with methyl groups alone or with n-alkyl(C2-C32), phenyl and/or hydroxyl groups attached to the silicon atom, and their condensation products with polyethylene and/or polypropyleneglycol Monomer or other reactant Additive (polymeric) Rubber, silicone It may not contain cyclic polysiloxanes that beside the phenyl group bear a hydrogen atom or a methyl group at the same silicon atom. 31 December 2031 1463 68083-14-7 73138-88-2 68440-81-3 organopolysiloxanes, linear or branched with methyl- or phenylgroups Monomer or other reactant (base oil) Plastics, lubricants 31 December 2037 1464 9016-00-6 63148-62-9 68037-74-1 organopolysiloxanes, linear or branched with methylgroups Monomer or other reactant (base oil) Plastics, lubricants 31 December 2031 1465 organopolysiloxanes with vinyl groups attached to the silicon atom Monomer or other reactant Additive (polymeric) Rubber, silicone 31 December 2031 1466 64741-56-6 petroleum residues, vacuum distilled Monomer or other reactant (resin) Rubber 31 December 2031 1467 92062-05-0 petroleum residues, thermal cracked vacuum Monomer or other reactant (resin) Rubber 31 December 2031 1468 platinum complexes Aid to polymerisation Silicone 31 December 2031 1469 polyalcoxyesters of acids, fatty with an even number of carbon (C8-C24) Additive Plastics 31 December 2031 1470 68037-01-4 poly 1-decene hydrated Monomer or other reactant (base oil) Lubricants Impurities of hydrocarbons with number of Carbon smaller than 30 not more than 1,5 %, free of naphthene, aromatics and PAH. 31 December 2034 1471 polydienic resin, synthetic Additive All 31 December 2031 1472 polydimethyl siloxanes and polydimethyl silicones, 3-aminopropyl-group terminated, polymers with 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane Monomer or other reactant Additive (polymeric) Rubber, silicone (16) Note conditions of use for 1-isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane (EUPL Number 0410) and 1-amino-3-aminomethyl-3,5,5-trimethylcyclohexane (EUPL Number 0391). 31 December 2031 1473 polydimethyl siloxanes and polydimethyl silicones, 3-aminopropyl-group terminated, polymers with bis(4-isocyanatocyclohexyl)methane Monomer or other reactant Additive (polymeric) Rubber, silicone (16) Note conditions of use for bis(4-isocyanatocyclohexyl)methane (EUPL Number 0420) and bis(4-aminocyclohexyl)methane (EUPL Number 0366). 31 December 2031 1474 polyethylene glycol ethers of monohydric aliphatic alcohols (C12-C20) and of alkylphenols (C2-C9) Polymer production aid Silicone 31 December 2031 1475 9002-98-6 polyethyleneimine Additive Plastics, coatings For polypropylene as an anchoring agent: ≤ 0,05 μg/dm2 provided that the product does not release ethyleneimine. 31 December 2034 1476 polyethylene oxide (8-14), esterified with lauric acid, oleic acid, ricinoleic acid and/or stearic acid Monomer or other reactant Other Rubber, coatings 31 December 2031 1477 polyethylene oxide, molecular weight > 200 (pEO) Additive Polymer production aid Plastics 31 December 2031 1478 polyethylene oxide(4-14)ether of octyl- and/or nonylphenol Polymer production aid Plastics, rubber 250 31 December 2031 1479 polyethylene oxide(4-14)ethers of monohydric, primary, unbranched, saturated C12-C18 alcohols Additive Plastics 250 31 December 2031 1480 polypropylene oxide, esterified with lauric acid, oleic acid, ricinoleic acid and/or stearic acid Polymer production aid Aid to polymerisation Plastics 31 December 2031 1481 polysaccharides Polymer production aid Rubber 31 December 2031 1482 9003-53-6 polystyrene (with pentane as expansion agent) Monomer or other reactant (resin) Plastics, rubber 31 December 2031 1483 polyterpenes Additive Lubricants 31 December 2031 1484 25213-24-5 polyvinyl alcohol, manufactured by saponification of polyvinyl acetate, with a degree of saponification ≥ 20 % Polymer production aid Plastics Maximum dosage = 1 % (w/w). 31 December 2034 1485 polyvinyl alcohol, partially acetylated with < 20 % acetyl groups and a K-value of > 40 Polymer production aid Coatings, silicone 31 December 2031 1486 71011-24-0 quaternary ammonium compounds, benzyl(hydrogenated tallow alkyl)dimethyl, chlorides, compounds with bentonite Polymer production aid Additive Lubricants 31 December 2031 1487 68953-58-2 quaternary ammonium compounds, bis(hydrogenated tallow alkyl)dimethyl, salts with bentonite Polymer production aid Additive Lubricants 31 December 2031 1488 reticulated cationic polyalkyleneamine Additive Plastics (49) 31 December 2031 1489 sebacic acid, reaction product with stearylamide, neutralised with calcium hydroxide Polymer production aid Additive Lubricants 31 December 2031 1490 silanols, with at least one hydroxyl group and one or more methyl, vinyl or phenyl groups on every silicon atom Monomer or other reactant Rubber 0,1 31 December 2031 1491 68988-56-7 silicium dioxide, reaction product with trimethylchlorosilane and isopropyl alcohol Polymer production aid Lubricants 31 December 2031 1492 9006-65-9 silicone oils (organopolysiloxanes with methyl and/or phenyl groups) Monomer or other reactant (base oil) Additive (polymeric) Rubber, coatings, lubricants 31 December 2031 1493 sorbitol esters with linear fatty acids, saturated or not, with an even number of carbon C8-C20 Additive Coatings 0,1 31 December 2031 1494 stearic acid mono or di esters with ethanediol and/or ether bis(2-hydroxyethyl) and/or triethyleneglycol Additive Plastics 31 December 2031 1495 titanic acid, esters with isobutanol, n-butanol and the enolate of ethylacetoacetate Aid to polymerisation Silicone 31 December 2031 1496 26780-96-1 2,2,4-trimethyl–1,2-dihydrochinolin (polymerised) Additive Rubber 31 December 2031 1497 trivinyl cyclohexane and α,ω-dihydrogenpolyhydrogenmethyldimethyl-siloxanes, addition products of Monomer or other reactant Additive (polymeric) Silicone Maximum dosage = 10 % (w/w). 31 December 2031 1498 urea-formaldehyde condensation products Monomer or other reactant (resin) Additive Polymer production aid Plastics, coatings (15) 31 December 2031 1499 vinyl esters of monohydric, saturated, aliphatic carboxylic acids, C2-C20 Monomer or other reactant Plastics 2,5 31 December 2031 1500 2098907-70-9 siloxane and silicone, dimethyl, hydroxyterminated (MW > 7400 Da), ethers with C16-C18 fatty acids esters with pentaerythritol Polymer production aid Other (processing aid) Rubber The polymer may contain siloxane and silicone, dimethyl, hydroxy-terminated (MW > 7400 Da), fatty acids, and C16-C18-fatty acids ester of pentaerythritol. 31 December 2031 1501 1318-02-1 zeolites, natural and synthetic, sodium salts Additive Aid to polymerisation Plastics, rubber, coatings For aluminium, refer to Annex V. If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1502 hydrocarbons, C10-C14, aromatic content ≤1 % Additive Plastics, coatings Only to be used if the production process temperature is above the boiling point. 31 December 2031 1503 921-728-3 64741-66-8 hydrocarbons, C7-C9, isoalkanes, with EC No. 921-728-3, boiling point 90 to 150 °C, negligible solubility in water Additive All Only to be used if the production process temperature is above the boiling point. 31 December 2031 1504 920-750-0 64742-49-0 hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics, with EC No. 920-750-0, boiling point 90 to 165 °C, log Po/w=2.2-5.2, insoluble in water Additive All Only to be used if the production process temperature is above the boiling point. 31 December 2031 1505 titanium hydroxide (orthotitanic acid) Additive All, except rubber If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1506 119345-04-9 benzene, 1,1'-oxybis-,tetrapropylene derivatised, sulfonated sodium salts Additive Polymer production aid Coatings 450 For the MTCtap values of degradation products, refer to Table 4. 31 December 2031 1507 61789-44-4 castor oil fatty acids Monomer or other reactant Coatings 31 December 2031 1508 61790-37-2 tallow oil fatty acids Monomer or other reactant (base oil) Coatings, lubricants 31 December 2031 1509 67762-90-7 silicon dioxide, reaction product with polydimethylsiloxane Additive Polymer production aid Coatings, lubricants For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. 31 December 2031 1510 68308-51-0 cotton seed oil fatty acids Monomer or other reactant Coatings 31 December 2031 1511 68424-45-3 linseed oil fatty acids Monomer or other reactant Coatings 31 December 2031 1512 68611-44-9 silicon dioxide, reaction product with dimethyldicholorosilane Polymer production aid Additive Lubricants For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. 31 December 2031 1513 68909-20-6 silicon dioxide, reaction product with hexamethyldisilazane Polymer production aid Additive Lubricants For synthetic amorphous silicon dioxide, silanated: primary particles of 1–100 nm which are aggregated to a size of 0,1–1 μm and may form agglomerates within the size distribution of 0,3 μm to the mm size. 31 December 2031 1514 84625-38-7 sunflower oil fatty acids Monomer or other reactant Coatings 31 December 2031 1515 9003-35-4 phenolformaldehyde resins Aid to polymerisation Rubber (15) MW > 1000 Da. 31 December 2031 1516 91744-27-3 glycerides, mono-, di- and tri castor oil Additive Polymer production aid Coatings 31 December 2031 1517 92044-96-7 olive oil fatty acids Monomer or other reactant Coatings 31 December 2031 1518 93165-31-2 rapeseed oil fatty acids Monomer or other reactant Coatings 31 December 2031 1519 corn oil fatty acids Monomer or other reactant Coatings 31 December 2031 1520 dicyclopentadiene-indene-styrene-alpha-methylstyrene-vinyltoluene-isobutylene-copolymer, hydrogenated Additive Polymer production aid Coatings 250 31 December 2031 1521 fish oil fatty acids Monomer or other reactant Coatings 31 December 2031 1522 hempseed oil fatty acids Monomer or other reactant Coatings 31 December 2031 1523 palm oil fatty acids Monomer or other reactant Coatings 31 December 2031 1524 palmkernel oil fatty acids Monomer or other reactant Coatings 31 December 2031 1525 perilla oil fatty acids Monomer or other reactant Coatings 31 December 2031 1526 poppy-seed oil fatty acids Monomer or other reactant Coatings 31 December 2031 1527 pumpkin seed oil fatty acids Monomer or other reactant Coatings 31 December 2031 1528 ricinoleic acid, dehydrogenated Monomer or other reactant Coatings 31 December 2031 1529 safflower oil fatty acids Monomer or other reactant Coatings 31 December 2031 1530 sesame oil fatty acids Monomer or other reactant Coatings 31 December 2031 1531 walnut oil fatty acids Monomer or other reactant Coatings 31 December 2031 1532 1,4-butanediol, trimethylolpropane, 2,3-butylene glycol, hydroquinone dihydroxydiethylether and their condensation derivatives with propylene oxide Monomer or other reactant Plastics (29) 31 December 2031 1533 1,5-naphthylenediisocyanate, or 4,4'-diphenylmethanediisocyanate, or toluylenediisocyanate Monomer or other reactant Plastics (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1534 acrylonitrile copolymers with divinylbenzene (except ion exchange resins) Additive Plastics 0,1 - expressed as acrylonitrile monomer 31 December 2031 1535 acrylic, fumaric, maleic and methacrylic esters Additive Plastics (21) 31 December 2031 1536 beta amino crotonic acid esters with 1,4-butylene glycol and with C16-C18 fatty alcohols Additive Plastics For rigid PVC and its copolymers with predominantly plasticiser-free PVC content: maximum dosage = 3 % (w/w). 31 December 2031 1537 butylated, styrenated, butylstyrene cresols with an average molecular weight 312 Additive Plastics Maximum dosage = 0,5 % (w/w). 31 December 2031 1538 calcium, lithium, manganese, aluminium, zinc, sodium, potassium, magnesium stearates, palmitates, ricinoleates, heptanoates, octoates Additive Plastics For aluminium, lithium, manganese and zinc, refer to Annex V. 31 December 2031 1539 castor oil and its dehydration, hydrogenation and/or condensation products with adipic, sebacic and phthalic acids Additive Plastics (27) 31 December 2031 1540 clays Additive Rubber 31 December 2031 1541 condensation products of formaldehyde with: melamine Monomer or other reactant Rubber MTCtap for formaldehyde: 0.15 MTCtap for phenols: 0.05 (15) 31 December 2031 1542 condensation products of polyoxyethylene-3 with fatty alcohols C10-C18 Additive Plastics For polyolefin films: maximum dosage = 1 % (w/w). 31 December 2031 1543 copolymers of alpha-methylstyrene with vinyltoluene Monomer or other reactant Plastics 31 December 2031 1544 copolymers of butadiene with styrene and divinylbenzene Monomer or other reactant Plastics 31 December 2031 1545 copolymers of styrene and/or alpha-methylstyrene with acrylonitrile Monomer or other reactant Plastics 0,1 - expressed as acrylonitrile monomer 31 December 2031 1546 copolymers of styrene and/or alpha-methylstyrene with butadiene Monomer or other reactant Plastics 31 December 2031 1547 copolymers of styrene and/or alpha-methylstyrene with butadiene and acrylonitrile Monomer or other reactant Plastics 0,1 - expressed as acrylonitrile monomer 31 December 2031 1548 copolymers of styrene and/or alpha-methylstyrene with methylmethacrylate Monomer or other reactant Plastics 31 December 2031 1549 copolymers of styrene with divinylbenzene (except ion exchange resins) Monomer or other reactant Plastics 31 December 2031 1550 copolymers of tetrafluoroethylene with hexafluoropropylene Monomer or other reactant Plastics (38) 31 December 2028 1551 copolymers of vinyl chloride with acrylonitrile Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. 31 December 2031 1552 copolymers of vinyl chloride with cetylvinyl ether Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. 31 December 2031 1553 copolymers of vinyl chloride with vinyl acetate modified with maleic anhydride and polyvinyl alcohol Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. 31 December 2031 1554 copolymers of vinyl chloride with vinylidene chloride Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile Vinyl chloride monomer: maximum residual content in the final material (QM) = 1 mg/kg. 31 December 2031 1555 copolymers of vinylidene chloride with acrylonitrile Monomer or other reactant Plastics 0,1 - expressed as vinyl chloride monomer and acrylonitrile 31 December 2031 1556 cresols Monomer or other reactant Rubber formaldehyde MTCtap = 150 μg/l. 31 December 2031 1557 85116-97-8 diethylene glycol ester with stearic acid Additive Plastics 31 December 2031 1558 diphenylcarbonate with phosgene Monomer or other reactant Plastics 31 December 2031 1559 emulsion silicones Additive Rubber Composition according to silicones. 31 December 2031 1560 epoxy resins Other (used in the casting process to produce cast film or moulding) Plastics 31 December 2031 1561 ester products between rosin, maleic and citric acid with C3-C6 polyalkaloids Monomer or other reactant Rubber 31 December 2031 1562 ester-like condensation products between rosin, maleic acid and citric acid with polyalcohols containing three to six C atoms in the molecule Monomer or other reactant Plastics 31 December 2031 1563 esters of fatty acids with polyglycerol Additive Plastics For PVC and polyolefin stretch films. 31 December 2031 1564 esters of glycerol with behenic and arachidic acids Additive Plastics 31 December 2031 1565 esters of saturated aliphatic acids C6-C22 with saturated aliphatic monohydroxyl alcohols C2-C20, including oleic alcohol Additive Plastics Maximum residual content in the final material (QM) = 15000 mg/kg. 31 December 2031 1566 ethylene copolymers with butene Monomer or other reactant Plastics 31 December 2031 1567 ethylene copolymers with propylene Monomer or other reactant Plastics 31 December 2031 1568 ethylenediamine with fatty acid Monomer or other reactant Plastics 31 December 2031 1569 glycerol, esters with caprylic and n-decanoic acids Additive Plastics 31 December 2031 1570 glycerophthalic resins modified with oil and styrene and/or alpha-methylstyrene Monomer or other reactant Plastics (27) 31 December 2031 1571 hexamethylenediamine with adipic and/or sebacic acid Monomer or other reactant Plastics 31 December 2031 1572 hydrogenated homopolymers and/or copolymers of 1-decene and/or 1-dodecene and/or 1-octene Additive Plastics 31 December 2031 1573 iso-octyl-epoxy-stearate Additive Plastics 31 December 2031 1574 linseed oils epoxidised using good industrial practice Additive Plastics For PVC and PVDC (epoxidised linseed oil iodine number < 6; oxirane oxygen content < 10 %). 31 December 2031 1575 maleic resins modified with rosin and abietic acid Monomer or other reactant Plastics, rubber 31 December 2031 1576 mercaptobenzimidazole and zinc salts Monomer or other reactant Rubber For zinc, refer to Annex V. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1577 63231-60-7 microcrystalline waxes Additive Rubber The sample under examination is considered suitable for use if it does not exceed the following absorption limits per centimetre optical pathlength: 31 December 2031 1578 mixture of dimethyltin-s,s'-bis (isooctylmecraptoacetate) and mono methyltin-s,s'-tris (isooctylmecraptoacetate) Additive Plastics (9) For use in PVC and rigid PVC copolymers free of plasticisers. 31 December 2031 1579 200-338-0 246-770-3 57-55-6 25265-71-8 mono- and dipropylene glycols Monomer or other reactant Plastics 31 December 2031 1580 277-291-8 - 73138-45-1 - montanic acid ester with ethanediol and 1,3 butanediol Additive Plastics Provided that the product does not release ethylene glycol. 31 December 2031 1581 octylalcohols Monomer or other reactant Plastics, rubber 31 December 2031 1582 organopolysiloxanes with 1,2-propanediol groups Monomer or other reactant Additive or polymer production aid Rubber 31 December 2031 1583 organopolysiloxanes with 1,3-propanediol groups Monomer or other reactant Rubber 31 December 2031 1584 organopolysiloxanes with 2,4-toluidene diisocyanate groups Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1585 organopolysiloxanes with 2,6-toluidene diisocyanate groups Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1586 organopolysiloxanes with ethylene oxide groups Monomer or other reactant Rubber 31 December 2031 1587 organopolysiloxanes with fluorinated groups Monomer or other reactant Rubber 31 December 2031 1588 organopolysiloxanes with methyl groups Monomer or other reactant Rubber 31 December 2031 1589 organopolysiloxanes with pentaerythritol groups Monomer or other reactant Additive or polymer production aid Rubber 31 December 2031 1590 organopolysiloxanes with phenyl groups Monomer or other reactant Rubber 31 December 2031 1591 organopolysiloxanes with propylene oxide groups Monomer or other reactant Rubber 31 December 2031 1592 organopolysiloxanes with sorbitol groups Monomer or other reactant Additive or polymer production aid Rubber 31 December 2031 1593 organopolysiloxanes with tetrafluoroethylene groups Monomer or other reactant Rubber 31 December 2031 1594 organopolysiloxanes with triethylene glycol groups Monomer or other reactant Rubber 31 December 2031 1595 organopolysiloxanes with trimethylolpropane groups Monomer or other reactant Rubber 31 December 2031 1596 organopolysiloxanes with triphenylmethanediisocyanate groups Monomer or other reactant Rubber 5,0 - expressed as primary aromatic amines (16) Maximum residual content in the final material (QM) = 1 mg/kg in the product, expressed as isocyanate moiety. Verification of compliance by residual content per water contact surface area (QMA). 31 December 2031 1597 organopolysiloxanes with vinyl groups Monomer or other reactant Rubber 31 December 2031 1598 pentenes Monomer or other reactant Rubber 31 December 2031 1599 phenolic resins alone or modified with glycerophthalic, epoxy or polyvinyl butyral resins or with butyl alcohol Monomer or other reactant Plastics For paints and varnishes. 31 December 2031 1600 phenols and/or methylphenols condensed with styrene and/or alpha-methyl-styrene Additive Rubber 31 December 2031 1601 polyacetal resins Additive Rubber 31 December 2031 1602 polyamide resulting from the polymerisation of 1,3,5-benzene tricarbonyl chloride with 1,3-benzene diamine Monomer or other reactant Plastics For film thickness ≤ 4 μm in reverse osmosis/ultrafiltration plants. Additional requirements for primary aromatic amines and sec. amines apply; refer to Sections 2.2.2-2.2.4, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1603 polyglycols Additive Rubber 31 December 2031 1604 polymers derived from the esterification of azelaic acid with n-hexyl and 2-ethylhexyl alcohols Additive Plastics 31 December 2031 1605 polymers of butyl, ethyl and methyl acrylates and methyl methacrylates Monomer or other reactant Plastics Product must be washed with water at room temperature for 2 hours (except films and coatings < 0,2 mm thick). 31 December 2031 1606 saturated, unsaturated and hydroxylated fatty acids (C8-C24) Additive Rubber 31 December 2031 1607 silica and hydrated silicas Additive Rubber If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1608 silicone oils Additive Other (processing aid) Plastics, rubber 31 December 2031 1609 sodium pentamethylenedithiocarbamate Aid to polymerisation Rubber (42) 31 December 2031 1610 sorbitol esters with erucic, lauric, linoleic, myristic, oleic, pelargonic, palmitic, ricinoleic, stearic, 12-hydroxystearic acids Additive Plastics 31 December 2031 1611 soya polymers Monomer or other reactant Additive Plastics 31 December 2031 1612 terpenic resins from dipentene, alfapinene, betapinene Monomer or other reactant Rubber 31 December 2031 1613 terpolymers of ethylene, vinyl acetate and carbon monoxide Additive Plastics For use in PVC. 31 December 2031 1614 urea resins modified with butyl alcohol Monomer or other reactant Rubber For use in paints and varnishes. 31 December 2031 1615 xylenols Monomer or other reactant Rubber formaldehyde MTCtap = 150 μg/l. 31 December 2031 1616 alkyl(C8-C18)sulfonic acids, sodium salts Additive Polymer production aid Rubber 1500 - expressed as the sum of alkyl(C8-C18)sulfuric and alkyl(C8-C18)benzenesulfonic acids 31 December 2031 1617 alkyl(C8-C18)sulfuric acids, sodium salts Additive Polymer production aid Rubber 1500 - expressed as the sum of alkyl(C8-C18)sulfuric and alkyl(C8-C18)benzenesulfonic acids 31 December 2031 1618 chlorobutadienes Monomer or other reactant Rubber 250 31 December 2031 1619 63393-89-5 coumarone-indene resins Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1620 fatty acids, saturated and unsaturated, with an even number of C-atoms, C8-C22, unsaponifiables content not to exceed 2%, esters with pentaerythritol Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1621 fatty acids, linear, saturated and unsaturated, with an even number of C-atoms, C8-C22, unsaponifiables content not to exceed 2% Aid to polymerisation Rubber 31 December 2031 1622 fibres of pure cellulose Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1623 Fibres of regenerated cellulose in accordance with Commission Directive 2007/42/EC Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1624 82-74-2 hydrocarbon waxes, paraffin and microcrystalline (hydrogenated) Additive Rubber 31 December 2031 1625 organopolysiloxanes (silicones), with two methyl groups to each silicon atom, molecular weight 13,5-30 Additive or polymer production aid Rubber 750 31 December 2031 1626 8020-83-5 paraffin mineral oils Additive Rubber 31 December 2031 1627 phthalic acid, esters with triethyleneglycol Additive Rubber (2) (27) In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1628 polyethyleneglycol (4-14) ethers of monohydric, linear, saturated, primary alcohols, C12-C18 Additive Polymer production aid Rubber 250 31 December 2031 1629 polyethyleneglycol (4-14) ethers of octyl- and/or nonylphenol Additive Polymer production aid Rubber 250 31 December 2031 1630 polyethyleneglycol (8-14), esters with lauric, oleic, ricinoleic, and/or stearic acid Additive or polymer production aid Rubber 31 December 2031 1631 73398-64-8 quaternary ammonium compounds, di-C8-C18-alkyldimethyl, chlorides Additive or polymer production aid Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1632 regenerated elastomers Additive Rubber Regenerated elastomer to the extent that they are derived from rubber that complies with the European positive list for organic materials. 31 December 2031 1633 rosin derivatives Additive Rubber 31 December 2031 1634 silanols with at least one hydroxyl group and one or more methyl groups to each silicon atom Monomer or other reactant Rubber 31 December 2031 1635 siloxanes, with one hydrogen atom and one methyl group to each silicon atom Monomer or other reactant Silicone 31 December 2031 1636 siloxanes, with two methylgroups to each silicon atom and a vinyl group to the terminal silicon atoms Monomer or other reactant Rubber 31 December 2031 1637 soot (furnace black and channel black) and other carbon products like graphite and coke powder Additive Rubber 31 December 2031 1638 styrene (2 moles) condensed with 1 mole of a mixture of o-, m- and p-cresols, provided that the Brookfield viscosity of the end product is between 14 and 17 cP at 25 °C Additive Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2028 1639 styrene and/or alfa-methylstyrene and/or -alkene(C3-C12)phenol and/or methylphenol reaction products Additive Rubber 250 31 December 2028 1640 thioxylenols Additive or polymer production aid Rubber In rubbers, not for use in products in contact with warm and hot water. 31 December 2031 1641 tris(mono- and dinonylphenyl) phosphite Additive Rubber In rubbers, not for use in products in contact with warm and hot water. Tris(2-hydroxypropyl)amine impurity content not to exceed 1 %. 31 December 2031 1642 hemp fibres Coatings If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1643 linen fibres Coatings If used as filler or pigment (additive) the requirements on purity of pigments, colorants and fillers apply; refer to Section 4.6, Annex I of Commission Implementing Decision (EU) 2024/368. 31 December 2028 Note 1: Explanation of the notes in Tables 1 and 2 The meaning of the notes provided in Tables 1 and 2 is as follows: Substance numbers under European food contact material (FCM) legislation are provided for information purposes only. This column indicates the technical function that the starting substance performs when used in the drinking water contact materials the starting substance is authorised for. This column indicates the categories of drinking water contact materials the starting substance is authorised for. Total Maximum Tolerable Concentration at the tap (MTC(T)tap, organics) means the maximum permitted concentration of specified substances migrating from organic materials into water intended for human consumption either as (a) total of moiety of the substances as provided under Table 3; or (b) total of the bound or unbound element or ion provided under Annex V. Relevant chemical species are those identified in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365. Note 2: Scope of an authorisation Note 3: Additional conditions of use MTC(T)tap, organics reference in Table 1 MTC(T)tap, organics in μg/l MTC(T)tap, organics specification (1) 300 expressed as acetaldehyde (2) 1500 expressed as ethyleneglycol (3) 1500 expressed as maleic acid (4) 750 expressed as caprolactam (5) 150 expressed as the sum of the substances (6) 50 expressed as iodine (7) 60 expressed as tertiary amine (8) 300 expressed as the sum of the substances (9) 9,0 expressed as tin (for methyltin methyltin mercaptoacetates) (10) 0,3 expressed as tin (for di-n-octyltins) (11) 60 expressed as tin (for mono-n-octyltins) (12) 1500 expressed as the sum of the substances (13) 75 expressed as the sum of the substances (14) 250 expressed as the sum of the substances and their oxidation products (15) 750 expressed as formaldehyde (16) 0,1 expressed as isocyanate moiety (17) 2,5 expressed as the sum of the substances (18) 500 expressed as SO2 (19) 1500 expressed as the sum of the substances (20) 250 expressed as trimellitic acid (21) 300 expressed as acrylic acid (22) 300 expressed as methacrylic acid (23) 250 expressed as the sum of the substances (24) 2,5 expressed as the sum of mono-n-dodecyltin tris(isooctylmercaptoacetate), di-n-dodecyltin bis(isooctyl mercaptoacetate), mono-dodecyltin trichloride and di-dodecyltin dichloride) expressed as the sum of mono- and di-dodecyltin chloride (25) 90 expressed as the sum of the substances (26) 250 expressed as isophthalic acid (27) 375 expressed as terephthalic acid (28) 2,5 expressed as the sum of 6-hydroxyhexanoic acid and caprolactone (29) 250 expressed as 1,4-butanol (30) 1500 expressed as the sum of the substances (31) 3000 expressed as the sum of the substances plus Diisobutyl phthalate, with synonyms 1,2-bis(2-methylpropyl) benzene–1,2-dicarboxylate or DIBP and CAS number 84-69-5 which is not listed as an authorised substance in Table 1. However, it may co-occur with other phthalates as a consequence of its use as an aid to polymerisation and is included in group restrictions (32) 0,1 expressed as eugenol (33) 2,5 expressed as 1,3-benzenedimethanamine (hydrolysis product) (34) 2,5 expressed as crotonic acid (35) 30 expressed as the sum of phthalic acid, dibutyl ester (DBP), diisobutyl phthalate (DIBP), phthalic acid, benzyl butyl ester (BBP) and phthalic acid, bis(2-ethylhexyl) ester (DEHP) expressed as DEHP equivalents using the following equation: 5×DBP + 4×DIBP + 0.1×BBP + 1×DEHP (36) 2,5 expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine (37) 0,1 expressed as perchlorate (38) 0,05 expressed as PFAS Total (39) 0,01 expressed as Sum of PFAS (40) 150 expressed as the sum of (di)ethyleneglycol, monoalkyl (C1,C2,C4,C6) ethers and acetic acid, 2-ethoxyethyl ester (41) 1500 expressed as the sum of sodium salts of alkyl(C8-C18)benzene sulfonates, alkyl(C8-C18)naphthalene sulfonates, alkyl(C8-C18)sulfates and alkyl(C8-C18)sulfonates (42) 50 expressed as the sum of thiurams and dithiocarbamates (43) 100 expressed as the sum of benzothiazole-2-thiol (CAS Number 149-30-4, EUPL Number 0910), di(benzothiazole-2-yl) disulphide (CAS Number 120-78-5, EUPL Number 0890), 2-(morpholinothio)benzothiazole (CAS Number 102-77-2), N-tert-butylbenzothiazole-2-sulphenamide (CAS Number 95-31-8, EUPL Number 0854), N-cyclohexylbenzothiazole-2-sulfenamide (CAS Number 95-33-0, EUPL Number 0847), 2-(2,6-dimethylmorpholinothio) benzthiazole (CAS Number 102-78-3) and 2-benzothiazyl-N,N-diethylthiocarbamyl sulphide (CAS Number 95-30-7) (44) 0,1 expressed as the sum of ethylvinylbenzene and divinylbenzene (45) 0,6 expressed as the sum of 1,4- and 1,5-hexadiene (46) 2,5 expressed as neodecanoic acid (47) 50 expressed as the sum of xanthogenates (48) 10 2,5 expressed as the sum of TMBPF, TMBPF-DGE, TMBPF-DGE·H2O and TMBPF-DGE·2H2O expressed as the sum of TMBPF-DGE·HCl, TMBPF-DGE·2HCl and TMBPF-DGE·HCl·H2O 49 6 expressed as 3-monochlor–1,2-propane-diol Where entries in Table 1 which contain alkylphenol structural moieties are used as stabilisers they may be accompanied by the non-intentionally added substances shown in Table 4 and the MTCtap, organics values shown in the table shall apply to those substances. EC Number CAS Number Substance name Maximum Tolerable Concentration at the tap (MTCtap, organics) in μg/l 204-598-6 123-07-9 4-ethylphenol 0,1 202-679-0 98-54-4 4-tert-butylphenol 2,5 211-946-0 719-22-2 2,6-di-tert-butyl-1,4-benzoquinone 2,5 202-532-0 96-76-4 2,4-di-tert-butyl phenol 250 - 19263-36-6 3,5-di-tert-butyl-4-hydroxy styrene 0,1 216-592-0 1620-98-0 3,5-di-tert-butyl-4-hydroxy benzaldehyde 2,5 622-532-8 14035-33-7 3',5'-bis(tert-butyl)-4'-hydroxyacetophenone 2,5 872-478-6 82304-66-3 7,9-di-tert-butyl-1-oxaspiro[4.5]deca–6,9-diene–2,8-dione 100 228-985-4 243-556-1 6386-38-5 20170-32-5 methyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionic acid 50 as sum

Viscosity at 120 °C: > 3 Pa.s, — Softening point: > 95 °C as determined by ASTM Method E 28-67,

Bromine number: < 40 (ASTM D1159),

The colour of a 50 % solution in toluene < 11 on the Gardner scale,

Residual aromatic monomer ≤50 ppm.

Table 1 EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS European positive lists of individual starting substances for organic materials

(a) plasticiser;

(b) technical support agent in polyolefins in concentrations up to 0,05 % in the product.

(a) plasticiser;

(b) technical support agent in concentrations up to 0,1 % in the product.

(a) plasticiser; or

(b) technical support agent in concentrations up to 0,1 % in the product.

coatings; or

rubber; or

(a) plasticiser; or

(b) technical support agent in concentrations up to 0,1 % in the product.

4,4′-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No. 38613-77-3) (36-46 % w/w (*)),

4,3′-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No. 118421-00-4) (17-23 % w/w (*)),

3,3′-biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS No. 118421-01-5) (1-5 % w/w (*)),

4-biphenylene–0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No. 91362-37-7) (1119 % w/w (*)),

Tris(2,4-di-tert-butylphenyl)phosphite (CAS No. 31570-04-4) (9-18 % w/w (*)),

4,4′-biphenylene–0,0-bis(2,4-di-tert-butylphenyl)phosphonate-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS No. 112949-97-0) (< 5 % w/w (*))

Phosphor content of min. 5,4 % to max. 5,9 %,

Acid value of max. 10 mg KOH per gram,

Melt range of 85– 110 °C.

Table 1 (*) EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS European positive lists of individual starting substances for organic materials

(a) polyolefins at 0,1 % (w/w) concentration; or

(b) PET at 0,25 % (w/w) concentration.

(a) rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 1 % w/w;

(b) polylactic acid (PLA) at a maximum level of 5 % w/w.

(a) rigid poly(vinyl chloride) (PVC) for cold water application at a maximum level of 2 % w/w;

(b) polylactic acid (PLA) at a maximum level of 5 % w/w;

(c) polyethylene terephthalate (PET) at a maximum level of 5 % w/w.

processed at temperatures higher than 280 °C for at least 10 minutes,

processed at temperatures higher than 190 °C up to 30 % w/w for use in blends with polyoxymethylene polymers.

(a) sintered or processed (non-sintered) at temperatures at or above 360 °C for at least 10 minutes or at higher temperatures for equivalent shorter times;

(b) processed (non-sintered) at temperatures from 300 °C and up to 360 °C for at least 10 minutes.

(a) 10 % w/w in non-plasticised PVC in cold water applications;

(b) 15 % w/w in non-plasticised PLA.

a)

as an additive at up to 0,2 % w/w in high impact polystyrene for cold water applications.

b)

as an additive at up to 0,025% w/w in acrylonitrile-butadiene-styrene (ABS) materials for cold water applications.

Table 1 (*) Table 2 EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS European positive lists of individual starting substances for organic materials European positive lists of groups of starting substances for organic materials

(a) plasticiser; or

(b) technical support agent in concentrations up to 0,1 % in the product.

a)

epichlorhydric polyamide resin made from diaminopropylmethylamine and epichlorohydrin;

b)

epichlorhydric polyamide resin made from epichlorohydrin, adipic acid, caprolactam, diethylene triamine and/or ethylene diamine;

c)

epichlorhydric polyamide resin made from adipic acid, diethylene triamine and epichlorohydrin or a melt of epichlorhydrin and ammoniac;

d)

epichlorhydric polyamide-polyamide resin made from epichlorohydrin, dimethyladipate and diethylene triamine;

e)

epichlorhydric polyamide-polyamide resin made from epichlorohydrin, adipamide and diaminopropylmethylamine

phenol

cresol

xylenol

resorcinol

between 280 and 289 mμ: 0.15;

between 290 and 299 mμ: 0.12:

between 300 and 359 mμ: 0.08;

between 360 and 400 mμ: 0.02.

Table 1 (*) Table 2 Notes: 1.A.B.C.D.E. 2. EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS European positive lists of individual starting substances for organic materials European positive lists of groups of starting substances for organic materials

i.

Where a starting substance appearing on the list as an individual entry is also covered by a group entry, the conditions of use and specifications and expiry dates applying to this starting substance shall be those indicated in the individual entry exclusively.

ii.

Unless stated otherwise in Table 1, the following salts of authorised acids, phenols and alcohols shall be considered covered by that authorisation: aluminium, ammonium, barium, calcium, cobalt, copper, europium, gadolinium, iron, lanthanum, lithium, magnesium, manganese, potassium, sodium, terbium, and zinc. This is subject to compliance with the corresponding MTCtap, organics value for the element or ion shown in Annex V for organic materials. In certain cases, where the safety assessment indicates concerns on the use of the free acids, only the salts should be authorised by indicating in the list the name as … acid(s), salts.

iii.

Mixtures obtained by mixing authorised starting substances without a chemical reaction of the components shall be considered covered by that authorisation.

iv.

Where a starting substance appears on the list as its anhydrous form, its approval shall be considered to covers its hydrated form.

v.

In the case of any natural or synthetic polymeric substance of an authorised monomer or other reactant and that polymeric substance is not used as an additive, that polymeric substance shall be considered covered by the authorisation of that monomer or other reactant. After the first European positive list, only entries for the monomer and other reactant shall be included.

vi.

In the case of any natural or synthetic polymeric substance of an authorised monomer or other reactant and that polymeric substance has a molecular weight of at least 1000 Da, that polymeric substance shall be considered covered by the authorisation of that monomer or other reactant when used as additives. After the first European positive list, only entries for the monomer and other reactant shall be included. As an exception, this provision shall not apply to polymers obtained from microbial fermentation.

vii.

Pre-polymers and natural or synthetic polymers, as well as their mixtures, used as monomer or other reactant incorporated in the polymer shall be considered covered by the authorisation of the monomers or other reactant required to synthesise them. After the first European positive list, only entries for the monomer or other reactant shall be included. As an exception, this provision shall not apply to polymers obtained from microbial fermentation, pre-polymers for organopolysiloxanes used in the manufacture of silicones, rubbers, lubricants and surface treatment for fillers, and pre-polymers for coatings.

viii.

After the first European positive list, only entries for a polymer shall be included in cases for which points v to vii are not applicable.

ix.

Organic cementitious constituents authorised on the European positive list of organic cementitious constituents of Annex III may be used in organic materials when used as constituents in cementitious fillers.

x.

Ceramic compositions authorised on the European positive list of composition for enamels, ceramic and other inorganic materials of Annex IV may be used as fillers in organic materials.

xi.

Fibres made of metallic compositions authorised on the European positive list of compositions for metallic materials of Annex II may be used in organic materials.

xii.

Fibres and microballs made of glass compositions authorised on the European positive list of composition for enamels, ceramics and other inorganic materials of Annex IV may be used in organic materials provided that each filament has a diameter above 1 μm and the average diameter of the filaments in the organic material is above 5 μm.

xiii.

Water may be used as a starting substance in the manufacture of organic materials that come into contact with water intended for human consumption.

xiv.

An entry in Table 1 covers a nanoform only when it is explicitly stated in the approval of that entry.

Table 1 (*) Table 2 Notes: 1.A.B.C.D.E. 2. 3. EUROPEAN POSITIVE LIST OF STARTING SUBSTANCES FOR ORGANIC MATERIALS European positive lists of individual starting substances for organic materials European positive lists of groups of starting substances for organic materials

i.

Only biocidal active substances of Product-type 6 (Preservatives for products during storage) in accordance with Regulation (EU) No 528/2012 may be used as starting substances.

ii.

Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as metallic fibres, shall adhere to the requirements of Annex II. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as ceramic fillers, shall adhere to the requirements of Annex IV. Entries in Table 1 and Table 2 which according to their conditions of use are used in organic materials as glass fibres and microballs, shall adhere to the requirements of Annex IV. Where indicated in Table 1, entries identified with an MTC(T)tap, organics shall comply with the following:

ANNEX II Table 1 Table 2 Notes: 1.A. 2. EUROPEAN POSITIVE LIST OF COMPOSITIONS OF METALLIC MATERIALS AND GROUPS OF COMPOSITIONS FOR METALLIC MATERIALS European positive list of individual metallic compositions for metallic materials European positive list of groups of metallic compositions for metallic materials

EUPL Number Metallic composition category (A) Accepted metallic composition notation(s) Accepted metallic composition constituents Accepted metallic composition impurities Relevant product groups Conditions of use Expiry date Identity Minimum concentration (% w/w) Maximum concentration (% w/w) Identity Maximum concentration (% w/w) 1644 Copper-Zinc alloys CW501L-DW (CuZn10) Cu Zn 89,0 Remainder 91,0 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,05 0,1 < 0,02 C - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1645 Copper-Zinc alloys CW506L-DW (CuZn33) Cu Zn 66,0 Remainder 68,0 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,05 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1646 Copper-Zinc alloys CW507L-DW (CuZn36) Cu Zn 63,5 Remainder 65,5 Fe Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1647 Copper-Zinc alloys CW508L-DW (CuZn37) Cu Zn 62,0 Remainder 64,0 Al Fe Ni Pb Sn Each other impurity 0,05 0,1 0,2 0,1 0,1 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1648 Copper-Zinc alloys CW509L-DW (CuZn40) Cu Zn 59,5 Remainder 61,5 Al Fe Ni Pb Sn Each other impurity 0,05 0,2 0,2 0,2 0,2 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %; Pb: ≤ 0,2 %. 31 December 2034 1649 Copper-Zinc alloys CW510L-DW (CuZn42) Cu Zn 57,0 Remainder 59,0 Al Fe Ni Pb Sn Each other impurity 0,05 0,3 0,2 0,2 0,3 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 1650 Copper-Zinc-Aluminium alloys CuZn42Al (CC773S) Cu 57,0 59,0 Fe 0,3 B - D 31 December 2034 Zn Remainder Pb 0,2 Al 0,1 0,3 Sn Each other impurity 0,3 < 0,02 1651 Copper-Zinc-Aluminium-Tin alloys CuZn35Al1.5Sn Cu 64,0 66,0 Fe 0,10 B - D 31 December 2034 Zn Remainder Mn 0,10 Al Sn 1,40 0,50 1,60 0,70 Ni Pb Si Each other impurity 0,10 0,2 0,2 < 0,02 1652 Copper-Zinc-Aluminium-Silicon-Iron alloys CuZn35AlSiFe Cu 62,5 64,5 Ni 0,09 B - D 31 December 2034 Zn Remainder Pb 0,15 Al Si Fe 0,5 0,5 0,04 0,85 0,8 0,1 Sn Each other impurity 0,1 < 0,02 1653 Copper-Zinc-Arsenic alloys CW707R (CuZn30As) Cu 69,0 71,0 Fe 0,05 B - D 31 December 2034 Zn Remainder Mn 0,1 As 0,02 0,06 Pb Sn Each other impurity 0,07 0,05 < 0,02 1654 Copper-Zinc-Arsenic-Aluminium alloys CuZn35Al-C Cu 63,0 64,5 Fe 0,3 B - D 31 December 2034 Zn Remainder Mn 0,1 As Al 0,04 0,2 0,14 0,7 Pb Sn Each other impurity 0,2 0,3 < 0,02 1655 Copper-Zinc-Arsenic-Aluminium alloys CW702R (CuZn20Al2As) Cu 76,0 79,0 Pb 0,05 A - B 31 December 2034 Zn Remainder Ni 0,1 Al As 1,8 0,02 2,3 0,06 Sb Each other impurity 0,02 < 0,02 1656 Copper-Zinc-Arsenic-Antimony-Aluminium alloys CC771S (CuZn36AlAsSb-C) Cu 62,0 65,0 Fe 0,2 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %. 31 December 2034 Zn Remainder Mn 0,1 As Sb Αl 0,02 0,02 0,45 0,04 0,05 0,7 Ni Pb Sn Each other impurity 0,20 0,2 0,3 < 0,02 1657 Copper-Tin-Zinc-Phosphorus-Sulfur alloys CuSn4Zn2PS Cu Sn Zn P S 90,0 3,0 1,0 0,01 0,2 96,0 5,0 3,0 0,1 0,6 Fe Ni Pb Sb Each other impurity 0,3 0,3 0,2 0,1 < 0,02 B - D 31 December 2034 1658 Copper-Zinc-Silicon-Phosphorus alloys CW724R (CuZn21Si3P) Cu 75,0 77,0 Al 0,05 B - D 31 December 2034 Zn Remainder Fe 0,3 Si P 2,7 0,02 3,5 0,10 Mn Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,3 < 0,02 1659 Copper-Zinc-Silicon-Phosphorus alloys CC768S (CuZn21Si3P-C) Cu 75,0 77,0 Al 0,05 B - D B and Zr are used for grain refinement of this alloy. In the final material the content of these two elements shall be < 0,02 %. 31 December 2034 Zn Remainder Fe 0,3 Si P 2,7 0,02 3,5 0,10 Mn Ni Pb Sn Each other impurity 0,05 0,2 0,1 0,3 < 0,02 1660 Copper-Silicon-Zinc-Manganese-Phosphorus alloys CC245E (CuSi4Zn4MnP-C) Cu Remainder Al 0,3 B - D 31 December 2034 Si Zn Mn P 2,5 1,0 0,03 0,05 4,5 7,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1661 Copper-Silicon-Zinc-Manganese-Phosphorus alloys CC246E (CuSi4Zn9MnP-C) Cu Remainder Al 0,3 B - D 31 December 2034 Si Zn Mn P 2,5 7,0 0,03 0,05 4,5 11,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1662 Copper-Silicon-Zinc-Manganese-Phosphorus alloys CuSi4Zn4MnP Cu Remainder Al 0,3 B - D 31 December 2034 Si Zn Mn P 2,5 1,0 0,01 0,05 4,5 7,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1663 Copper-Silicon-Zinc-Manganese-Phosphorus alloys CuSi4Zn9MnP Cu Remainder Al 0,3 B - D 31 December 2034 Si Zn Mn P 2,5 7,0 0,01 0,05 4,5 11,0 0,09 0,15 Fe Ni Pb Sn Each other impurity 0,3 0,10 0,10 0,3 < 0,02 1664 Copper-Tin-Phosphorus alloys CW453K (CuSn8) Cu Remainder Fe 0,1 C - D 31 December 2034 Sn P 7,5 0,02 8,5 0,4 Ni Zn Each other impurity 0,2 0,2 < 0,02 1665 Copper-Tin-Lead-Phosphorus alloys CuSn10-C Cu Sn Pb P 88,0 9,0 0,2 0,01 90,0 11,0 1,0 0,2 Fe Mn Ni S Sb Zn Each other impurity 0,2 0,10 0,2 0,05 0,1 0,5 < 0,02 B - D Contents of certain elements are further restricted, compared to the standardised composition: Ni: ≤ 0,2 %; Sb: ≤ 0,1 %; Pb: 0.2 % - 1.0 %; P: 0.01 % - 0.2 %. 31 December 2034 1666 Copper-Nickel-Manganese-Iron alloys CW352 (CuNi10FeMn) Cu Remainder Each impurity < 0,02 B - D For use exclusively for fittings and ancillaries for heat exchangers and desalination equipment. 31 December 2031 Ni Mn Fe 9,0 0,5 1,0 11,0 1,0 2,0 1667 Copper-Nickel-Manganese-Iron alloys CW352H (CuNi10Fe1Mn) CW353H (CuNi30Fe2Mn2) CW354H (CuNi30Mn1Fe) Cu Remainder Each impurity < 0,02 B For use exclusively for fittings and ancillaries in desalination plants. 31 December 2031 Ni Fe Mn 9,0 1,0 0,5 32,0 2,5 2,5 1668 Coppers CW024A (Cu-DHP) Cu 99,9 Each impurity < 0,02 A - D Copper pipes cannot be used with all drinking waters distributed within the EU. Some water compositions (e.g., test water 1 according to EN 15664-1) cause a very high copper release. Member States may restrict the use of copper pipes with certain drinking waters. 31 December 2034 P 0,015 0,040 1669 Coppers CW004A (Cu-ETP) Cu 99,90 Each impurity < 0,02 C - D 31 December 2034 O 0,040 1670 Coppers CW008A (Cu-OF) Cu 99,95 Each impurity < 0,02 B - D 31 December 2034 1671 Coppers CW020A (Cu-PHC) Cu 99,95 Each impurity < 0,02 B - D 31 December 2034 P 0,001 0,006 1672 Coppers CW021A (Cu-HCP) Cu 99,95 Each impurity < 0,02 B - D 31 December 2034 P 0,002 0,007 1673 Coppers CW023A (Cu-DLP) Cu 99,90 Each impurity < 0,02 B - D 31 December 2034 P 0,005 0,013 1674 Tinned copper pipes and tinned copper fittings CW024A (Cu-DHP) with a tin layer of 1 μm thickness Sn 90 Impurities of the tin layer A - D 31 December 2034 Cu 10 As Bi Cd Cr Ni Pb Sb Each other impurity 0,01 0,01 0,01 0,01 0,01 0,01 0,01 < 0,02 1675 Aluminium Aluminium Al 99,0 Fe+Si Cu Others (e.g., Cr, Mg, Mn, Ni, Zn) Each other impurity 1,0 0,10 if Cr and/or Mn ≥ 0,05 %; 0,20 if Cr and/or Mn < 0,05 % 0,1 each < 0,02 B - C For use in access ladders and other minor components, and not for long-term contact, as follows: 31 December 2031 1676 Steel/Iron Galvanised steel Zn coating Impurities of the zinc coating A - D Acceptance is based on results that have been obtained with galvanised steel pipes with lead concentrations between 1,0 % and 0,6 % in the zinc layer, assuming a similar behaviour of pipes with lower lead concentrations. Galvanised steel pipes cannot be used with all drinking waters distributed within the EU. Member States may restrict the use of galvanised steel pipes with certain drinking waters which may cause unacceptable levels of corrosion. 31 December 2034 As Bi Cd Cr Pb Sb Each other impurity 0,02 0,01 0,01 0,02 0,05 0,01 < 0,02 1677 Steel/Iron Carbon steel according to EN 10025 / EN 10213 / EN 10222 Fe Al 0,05 Carbon steel with protective layer/coating: A - D. Unprotected carbon steel: C2 - D Carbon Steel for pipes and tanks: carbon steel without permanent protective layers (e.g., cementitious mortar linings or organic coatings (e.g. epoxy resins)) is not suitable for use in contact with drinking water. Carbon Steel for ancillaries: unprotected carbon steel can be used for specific applications (e.g. pumps, valves) and only for small surface in contact with drinking water. 31 December 2034 C Cr Mo Mn Ni 0,02 0,02 0,02 0,02 0,02 0,25 0,30 0,12 1,65 0,50 Cu Nb P S Si Ti V Each other impurity 0,55 0,05 0,03 0,03 0,6 0,05 0,12 < 0,02 1678 Steel/Iron Cast iron according to EN 1561 / EN 1563 Fe As 0,05 C2 Cast iron for pipes and tanks: cast iron without permanent protective layers is not suitable for pipes and fittings in contact with drinking water. Cast iron for ancillaries: unprotected cast iron can be used for specific applications (e.g. pumps, valves) and only for very small surface in contact with drinking water. 31 December 2034 C Cu Cr Mo Mn Ni Si 0,02 0,02 0,02 0,02 0,02 0,02 1.5 4,0 1,0 1,0 1,0 1,0 1,0 3,5 Mg P S Sn V Each other impurity 0,1 0,15 0,1 0,1 0,1 < 0,02 1679 Steel/Iron Stainless steels according to EN 10088 and EN 10283 A - D 31 December 2034 1680 Platings Electroplating of the outer surface (tin plating applied by a galvanic process) Cu Sn B- D (by reference to Cu alloys listed elsewhere in the metallic materials EUPL) Restrictions: 31 December 2031 1681 Platings Tin/Nickel platings applied by a galvanic process on the external surface Sn Ni 65 33 67 35 B- D (by reference to Cu alloys listed elsewhere in the metallic materials EUPL) Restrictions: 31 December 2031 1682 Platings Electrolytic Nickel/Chromium platings NI Cr B 31 December 2031 1683 Passive compositions NiCr7030 Ni 60,0 Al 0,30 B - D 31 December 2034 Cr Si 29,0 0,50 32,0 2,0 C Co Cu Fe Mn P S Each other impurity 0,10 1,5 0,50 5,0 1,00 0,020 0,015 < 0,02 1684 Passive compositions Ni55Ti45 Ni Ti 54,0 Remainder 56,0 Each impurity < 0,02 C - D 31 December 2034 1685 Passive compositions Ti1 according to ISO 23515:2022 Ti Remainder C O N H Fe Each other impurity Other impurities in total 0,08 0,18 0,03 0,015 0,20 < 0,1 < 0,4 B - D 31 December 2034 1686 Passive compositions Ti2 according to ISO 23515:2022 Ti Remainder C O N H Fe Each other impurity Other impurities in total 0,08 0,25 0,03 0,015 0,30 < 0,1 < 0,4 B - D 31 December 2034 1687 Passive compositions Ti3 according to ISO 23515:2022 Ti Remainder C O N H Fe Each other impurity Other impurities in total 0,08 0,35 0,05 0,015 0,30 < 0,1 < 0,4 B - D 31 December 2034 1688 Passive compositions Ti4 according to ISO 23515:2022 Ti Remainder C O N H Fe Each other impurity Other impurities in total 0,08 0,40 0,05 0,015 0,50 < 0,1 < 0,4 B - D 31 December 2034 1689 Passive compositions Ti-6Al-4V according to ISO 23515:2022 Ti Remainder C 0,08 B - D 31 December 2034 Al V 5,5 3,5 6,75 4,5 O N H Fe Each other impurity Other impurities in total 0,20 0,05 0,015 0,4 < 0,1 < 0,4 1690 Passive compositions Ti3.5Al3.0V0.4Mo0.9Ni0.25Pd0.14Ru0.2Fe Ti Remainder Total impurities < 0,08 B - D 31 December 2031 Al V Mo Ni Pd Ru Fe 3,5 3 0,4 0,9 0,25 0,14 0,2 EUPL Number Metallic composition category (A) Accepted metallic composition notation(s) Accepted metallic composition constituents Accepted metallic composition impurities Relevant product groups Conditions of use Expiry date Identity Minimum concentration (% w/w) Maximum concentration (% w/w) Identity Maximum concentration (% w/w) 1691 Copper alloys not elsewhere categorised Other copper alloys for Product Group D Cu Zn Si P Al Fe Mn Pb Ni As Sb No restriction No restriction No restriction No restriction 3,0 3,0 3,0 1,8 3,0 0,25 0,25 Each other element 0,1 D 31 December 2031 1692 Passive compositions Other passive metallic materials for Product Group D D 31 December 2031 1693 Hard brazing alloys and soft soldering alloys Hard brazing and soft soldering alloys meeting the maximum concentrations of the specified impurities Pb Sb Cd 0,1 0,1 0,01 B - C taking on account the extension of the final surface that might be exposed to drinking water For capillary brazing/soldering of pipes and fittings. The application of these alloys is critical to how they will behave during use and certain combinations of brazing/soft soldering alloy and parent metals may result in significant release of certain metals into the drinking water. 31 December 2031 Note 1: Explanation of the notes in Tables 1 and 2 The meaning of the note provided in Tables 1 and 2 is as follows: Metallic composition category means a group of metallic compositions with the same metallic composition constituents, the same behaviour in contact with water intended for human consumption and the same restrictions with regard to water composition and/or surface area. A category has a reference material(s) with a controlled composition for which the metal releases are known and reproducible and represents the reasonable worst-case metal releases for the category. They are identified in the ECHA guidance. Note 2: MTCtap, metallics The MTCtap, metallics, used to assess the safety of the use of the compositions listed under Tables 1 and 2 are provided for information purposes under Annex V.

Table 1 EUROPEAN POSITIVE LIST OF COMPOSITIONS OF METALLIC MATERIALS AND GROUPS OF COMPOSITIONS FOR METALLIC MATERIALS European positive list of individual metallic compositions for metallic materials

a)

short contact: up to 24 hours at any temperature condition;

b)

prolonged contact: more than 24 hours at a refrigerated temperature (8 - 12 °C).

(a) Bulk material of components to be tinned: copper alloys approved in the metallic materials EUPL;

(b) Layer composition: (i) Cu (ii) Sn;

(c) Applied process: galvanic tin plating;

(d) Purity of the used anodes: ≥ 99,90 %.

(a) Bulk composition of components to be plated: copper alloys approved in the metallic materials EUPL;

(b) composition of the plating: Sn (66 ± 1 %) and Ni (34 ± 1 %) (molar ratio 1:1);

(c) applied process: galvanic plating;

(d) purity of the used nickel-anodes: 99,90 %.

ANNEX III Table 1 Table 2 Table 3 Notes: 1. 2. 3. EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS List of generic constituents of cementitious materials Positive list of individual organic constituents for cementitious materials European positive lists of groups of organic constituents for cementitious materials

Table 1 sets out (1) the different categories of generic constituents of cementitious materials that may be used in the preparation of cementitious mixtures and (2) establishes conditions of use for each category. Generic constituent category Types of specific organic cementitious constituents within the scope of the European positive lists European positive list requirements Condition of use Cement Organic grinding aids or other organic substances used for the preparation of cement European positive list for cementitious materials Inorganic additions Organic grinding aids or other organic substances used for the preparation of inorganic additions European positive list for cementitious materials Aggregates Not relevant Not relevant Mixing water Not relevant Not relevant Organic additions Organic substances European positive list for organic materials European positive list for cementitious materials Starting substances that are authorised in the European positive list for organic materials which are authorised for use in the manufacture of coatings may be used to manufacture organic additions for use in cementitious materials Admixtures Organic substances European positive list for cementitious materials Fibres Organic substances European positive list for organic materials Starting substances that are authorised in the European positive list for organic materials may be used to manufacture polymer fibres for use in cementitious materials Formwork release agents Organic substances European positive list for cementitious materials Curing compounds Organic substances European positive list for cementitious materials EUPL Number EC Number CAS Number Organic cementitious constituent name Generic constituent category Technical function Maximum Tolerable Concentration at the tap (MTCtap, cementitious) in μg/l Total Maximum Tolerable Concentration at the tap (MTC(T)tap, cementitious) in μg/l (A) Conditions of use Expiry date Value for the organic cementitious constituent Values for other relevant chemical species (B) 1694 514-10-3 abietic acid Admixtures 31 December 2028 1695 64-19-7 acetic acid Admixtures 31 December 2034 1696 108-24-7 acetic anhydride Admixtures 31 December 2034 1697 6419-19-8 aminotris(methylphosphonic acid) (ATMP) Admixtures 0,1 - expressed as amines 31 December 2031 1698 1002-89-7 ammonium stearate Admixtures For ammonium, refer to Annex V. 31 December 2028 1699 577-11-7 anionic, docusate sodium Admixtures 31 December 2031 1700 85536-14-7 benzenesulfonic acid 4-C10-C13-sec-alk derivs Admixtures 31 December 2031 1701 2634-33-5 1,2-benzoisothiazol-3(2H)-one (BIT) Admixtures, organic additions, formwork release agents Biocide 25 Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1702 14548-60-8 benzylalcoholhemiformal Admixtures 31 December 2028 1703 120-32-1 2-benzyl-4-chloro phenol (Chlorophen) Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1704 90-43-7 biphenyl-2-ol (2-phenylphenol) Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1705 52-51-7 2-brom-2-nitropropan–1,3-diol (Bronopol) Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1706 123-95-5 butyl stearate Admixtures 31 December 2028 1707 544-17-2 calcium formate Admixtures 31 December 2031 1708 8061-52-7 calcium lignosulfonate Admixtures 12 31 December 2028 1709 1592-23-0 calcium stearate Admixtures 31 December 2031 1710 52627-73-3 capric acid (decanoic acid) Admixtures 31 December 2028 1711 124-07-2 caprylic acid (octanoic acid) Admixtures 31 December 2034 1712 9000-11-7 carboxy methyl cellulose Admixtures 31 December 2028 1713 9004-32-4 carboxy methyl cellulose, sodium salt Admixtures 31 December 2028 1714 9004-34-6 cellulose Admixtures 31 December 2028 1715 59-50-7 chlorocresol Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1716 911-418-6 55965-55-9 Reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (CIT/MIT) Admixtures, organic additions, formwork release agents Biocide 25 Mixture 5-chloro-2-methyl-2H-isothiazol-3-one (75%) and 2-methyl-4-isothiazolin-3-one (25%). Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1717 77-92-9 citric acid (anhydrous) Admixtures 31 December 2034 1718 5949-29-1 citric acid, monohydrate Admixtures 31 December 2028 1719 61791-31-9 coconut diethanolamide (cocamide DEA) Admixtures 31 December 2028 1720 10016-20-3 cyclohexapentylose (α-dextrin) Admixtures 31 December 2034 1721 7585-39-9 β-dextrin Admixtures 31 December 2034 1722 14431-43-7 dextrin / maltodextrin Admixtures 31 December 2028 1723 50-70-4 D-glucitol (sorbitol) Admixtures 31 December 2028 1724 10222-01-2 2,2-dibromo-3-nitrilopropionamide (DBNPA) Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1725 17603-42-8 2,3-dihydroxypropyl (dihydrogen phosphate), sodium salt Admixtures 31 December 2028 1726 39354-45-5 disodium dodecylethoxylate sulfosuccinate Admixtures 31 December 2028 1727 1643-20-5 dodecyldimethylamine oxide Admixtures 31 December 2031 1728 61791-26-2 ethoxylated tallow amine Admixtures 0,1 - expressed as amines 31 December 2028 1729 9004-57-3 cellulose, ethyl ether Admixtures 31 December 2028 1730 3586-55-8 (ethylenedioxy)-dimethanol Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1731 61790-12-3 fatty acids, tall oils Admixtures 31 December 2028 1732 50-00-0 formaldehyde Admixtures, organic additions, formwork release agents Biocide 750 Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1733 64-18-6 formic acid Admixtures 31 December 2034 1734 4719-04-4 hexahydro-1 3,5-tris(hydroxyethyl)-s-triazine (N-formal) Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1735 9004-62-0 cellulose, 2-​hydroxyethyl ether Admixtures 31 December 2028 1736 9032-42-2 cellulose, 2-​hydroxyethyl methyl ether Admixtures 31 December 2028 1737 37353-59-6 hydroxy methyl cellulose Admixtures 31 December 2028 1738 22987-21-9 hydroxyethyldiphosphonic acid Admixtures 31 December 2028 1739 8061-54-9 magnesium lignosulfonate Admixtures 12 31 December 2028 1740 68891-01-0 melamine formaldehyde, toluenesulfonamide polymer Admixtures 31 December 2034 1741 37206-01-2 methyl carboxy methyl cellulose Admixtures 31 December 2028 1742 9004-67-5 methyl cellulose Admixtures 31 December 2028 1743 9004-59-5 methyl ethyl cellulose Admixtures 31 December 2028 1744 9004-65-3 cellulose, 2-hydroxypropyl methyl ether (HPMC) Admixtures 31 December 2028 1745 2682-20-4 2-methyl-4-isothiazolin-3-one (MIT) Admixtures, organic additions, formwork release agents Biocide 25 Only to be used in aqueous polymer dispersions and emulsions. Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1746 37293-74-6 naphthalenesulfonic acid, polymer with formaldehyde, calcium salt Admixtures 31 December 2034 1747 36290-04-7 2-naphthalenesulfonic acid, polymer with formaldehyde, sodium salt Admixtures 31 December 2028 1748 26530-20-1 2-n-octyl-4-isothiazolin-3-one (OIT) Admixtures, organic additions, formwork release agents Biocide 25 Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, I of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1749 112-80-1 oleic acid Admixtures 31 December 2028 1750 132-27-4 o-phenyl-phenate (OPP) Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1751 111-30-8 1,5-pentandial (glutaraldehyde) Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1752 37971-36-1 2-phosphono-butane 1,2,4-tricarboxylic acid Admixtures 31 December 2031 1753 97105-14-1 polycarboxylic acid salt type surfactant Admixtures 31 December 2037 1754 68412-53-3 polyethylene glycol branched nonylphenyl ether phosphate Admixtures 31 December 2037 1755 37205-87-1 polyethylene glycol nonylphenyl ether Admixtures 31 December 2028 1756 72283-35-3 polyoxyalkylene alkylether fatty acid Admixtures 1500 31 December 2034 1757 73667-50-2 polysaccharide, succinoglycan Admixtures Exopolysaccharide, derived from fermentation of agrobacterium tumefaciens. 31 December 2037 1758 96949-22-3 polysaccharide, Welan gum Admixtures Exopolysaccharide, derived from fermentation of alcaligenes. 31 December 2034 1759 143-18-0 potassium oleate Admixtures 31 December 2028 1760 6381-59-5 304-59-6 potassium sodium tartrate Admixtures 31 December 2031 1761 3811-73-2 pyridine-2-thiol 1-oxide, sodium salt Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1762 127-09-3 sodium acetate Admixtures 31 December 2031 1763 15733-22-9 sodium p-chloro-m-cresolate Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1764 13150-00-0 sodium 2-,2-,2-dodecyloxy ethoxy ethyl sulfate Admixtures 1500 31 December 2028 1765 141-53-7 sodium formate Admixtures 31 December 2031 1766 31138-65-5 sodium glucoheptonate Admixtures 31 December 2031 1767 527-07-1 sodium gluconate Admixtures 31 December 2037 1768 137-16-6 sodium N-lauroylsarcosinate Admixtures 31 December 2031 1769 151-21-3 sodium n-dodecyl sulfate Admixtures 31 December 2031 1770 8061-51-6 sodium lignosulfonate Admixtures 12 31 December 2028 1771 9084-06-4 sodium naphthalene sulfonic acid Admixtures 31 December 2028 1772 61790-51-0 sodium resinate Admixtures 31 December 2031 1773 9005-25-8 starch, edible Admixtures 31 December 2028 1774 9049-76-7 starch hydroxypropyl ether Admixtures 31 December 2028 1775 57-11-4 stearic acid Admixtures 31 December 2034 1776 57-50-1 sucrose Admixtures 31 December 2028 1777 68131-32-8 sulfite liquors (calcium lignosulfonate) Admixtures 12 31 December 2028 1778 85586-07-8 sulfuric acid, mono-C12-C14-alkyl esters, sodium salts Admixtures 1500 31 December 2031 1779 64787-97-9 sulfurous acid, monosodium salt, polymer with formaldehyde and 1,3,5-triazine-2,4,6-triamine Admixtures 31 December 2037 1780 8029-43-4 syrups, hydrolysed starch Admixtures 31 December 2037 1781 68131-37-3 syrups, hydrolysed starch, dehydrated Admixtures 31 December 2028 1782 68425-17-2 syrups, hydrolysed starch, hydrogenated Admixtures Sorbitol (2-5 %), maltitol (9-14 %) and maltotritol (11-16 %). This mixture also contains 67-76 % hydrogenated oligosaccharides in compliance with the purity criteria for maltitol syrup E965(ii) as laid down in Commission Regulation (EU) No 231/2012. 31 December 2034 1783 65997-01-5 tall oil, sodium salt Admixtures 31 December 2031 1784 67701-06-8 tallow oleine Admixtures 31 December 2031 1785 533-74-4 tetrahydro–3,5-dimethyl-1,3,5-thiadiazine-2-thione Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1786 9014-85-1 2,4,7,9-tetramethyl-5-decyne–4,7-diol, ethoxylated Admixtures 31 December 2034 1787 126-71-6 triisobutyl phosphate Organic additions 31 December 2031 1788 102-71-6 triethanolamine (2,2,2-nitrilotriethanol) Admixtures, grinding aids 2,5 - expressed as the sum of triethanolamine and the hydrochloride adduct expressed as triethanolamine 31 December 2034 1789 2943-75-1 triethoxyoctylsilane Admixtures 31 December 2031 1790 9014-63-5 xylan (rosin wood) Admixtures 31 December 2028 1791 107-21-1 ethane–1,2-diol 1500 - expressed as ethyleneglycol. 31 December 2034 1792 11138-66-2 xanthan gum Admixtures Maximum dosage = 0,15 % (w/w) in concrete. 31 December 2028 1793 111-42-2 2,2'-iminodiethanol Admixtures Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2031 1794 111-46-6 diethylene glycol 1500 - expressed as ethyleneglycol 31 December 2034 1795 122-20-3 triisopropanolamine (1,1',1''-nitrilopropane-2-ol) (TIPAL) 250 31 December 2034 1796 141-43-5 2-aminoethanol 2,5 Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2034 1797 15214-89-8 2-acrylamido-2-methylpropanesulfonic acid 2,5 31 December 2034 1798 25322-69-4 polypropylene glycol 31 December 2034 1799 55965-84-9 Reaction mass of 5-chloro-2-methyl–1,2-thiazol-3(2H)-one and 2-methyl-1,2-thiazol-3(2H)-one (3:1) (CIT/MIT) Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2034 1800 56-81-5 glycerol 31 December 2034 1801 57-13-6 urea 31 December 2034 1802 87-69-4 tartaric acid Admixtures 31 December 2034 1803 9002-89-5 polyvinyl alcohol Organic additions 31 December 2037 1804 108-78-1 2,4,6-triamine-1,3,5-triazine 125 Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2028 1805 126-73-8 tributyl phosphate Admixtures, organic additions, formwork release agents Defoamer Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2028 1806 141-22-0 ricinoleic acid 2100 31 December 2028 1807 144-62-7 oxalic acid 300 31 December 2034 1808 60-00-4 edetic acid (EDTA) Maximum dosage = 0,004 % (w/w) in concrete. 31 December 2034 1809 68412-29-3 hydrolysed starch Maximum dosage = 0,15 % (w/w) in concrete. 31 December 2028 1810 9000-65-1 tragacanth gum Maximum dosage = 0,2 % (w/w) in concrete. 31 December 2028 1811 2478-10-6 4-hydroxybutylacrylate Organic additions 31 December 2031 1812 9003-01-4 polyacrylic acid Organic additions 31 December 2031 1813 9003-11-6 poly(ethylenepropylene)glycol Admixtures 31 December 2037 1814 100-42-5 styrene 31 December 2028 1815 1007848-63-6 tert-decanoic acid, ethenyl ester, polymer with ethene, ethenyl acetate and methyl 2-methyl-2-propenoate Organic additions 31 December 2034 1816 100-97-0 hexamethylentetramine 750 - expressed as formaldehyde 31 December 2034 1817 102782-43-4 alcohols, C9-C11, branched and linear, ethoxylated propoxylated Admixtures 31 December 2028 1818 103-11-7 2-ethylhexyl acrylate 2,5 31 December 2034 1819 10378-23-1 mercaptoethanol Admixtures 31 December 2028 1820 104-76-7 2-ethyl-1-hexanol Admixtures 1500 31 December 2034 1821 105-59-9 N-methyl diethanolamine Admixtures 31 December 2031 1822 106-91-2 2,3-epoxypropyl methacrylate 1,0 31 December 2028 1823 106-99-0 butadiene 0,1 31 December 2028 1824 107-13-1 acrylonitrile 0,1 31 December 2028 1825 107-96-0 mercaptopropionic acid Admixtures 31 December 2031 1826 108-05-4 acetic acid, vinyl ester 600 31 December 2028 1827 108-31-6 maleic anhydride 1500 - expressed as maleic acid. 31 December 2034 1828 110-16-7 maleic acid 1500 – expressed as maleic acid. 31 December 2034 1829 110-63-4 1,4-butanediol 250 - expressed as 1,4-butanediol. 31 December 2034 1830 110-97-4 1,1'-iminodipropan-2-ol Admixtures 31 December 2031 1831 111-82-0 methyl laurate 31 December 2031 1832 111-90-0 2-(2-ethoxyethoxy)ethanol Admixtures 31 December 2031 1833 112-27-6 triethyleneglycol 31 December 2034 1834 112-30-1 decan-1-ol 31 December 2034 1835 112-34-5 diethylene glycol monobutyl ether Admixtures 31 December 2034 1836 112-92-5 octadecan-1-ol 31 December 2031 1837 119-47-1 6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol Admixtures 75 31 December 2028 1838 122-96-3 piperazine–1,4-diethanol Admixtures 31 December 2031 1839 123-31-9 hydroquinone 30 31 December 2028 1840 125005-87-0 diutan gum Admixtures 31 December 2031 1841 126-30-7 2,2-dimethyl–1,3-propanediol 2,5 31 December 2034 1842 126-86-3 2,4,7,9-tetramethyldec-5-in–4,7-diol Admixtures 31 December 2031 1843 128-37-0 2,6-di-tert-butyl-p-cresol Organic additions 150 31 December 2034 1844 1338-41-6 sorbitan monostearate 31 December 2034 1845 13463-41-7 zinc, bis(1-hydroxy-2(1H)-pyridinethionato-O,S)-, (T-4)- Organic additions 0,1 For zinc, refer to Annex V. 31 December 2028 1846 140-88-5 ethyl acrylate 300 - expressed as acrylic acid. 31 December 2034 1847 141-32-2 butyl acrylate 300 - expressed as acrylic acid. 31 December 2034 1848 141-78-6 ethyl acetate 31 December 2034 1849 142-31-4 sodium octyl sulfate 31 December 2031 1850 142-87-0 sodium decyl sulfate 31 December 2031 1851 143-19-1 9-octadecenoic acid (9Z)-, sodium salt (1:1) Admixtures, organic additions, formwork release agents Additive for formwork release agents 31 December 2028 1852 143-22-6 2-(2-(2-butoxyethoxy)ethoxy)ethanol Admixtures 31 December 2031 1853 150413-26-6 poly(oxy–1,2-ethanediyl), .alpha.-sulfo-.omega.-(isotridecyloxy)-, sodium salt (1:1) Admixtures 31 December 2037 1854 150-76-5 hydroquinone methylether Admixtures 31 December 2031 1855 15763-76-5 sodium p-cumenesulfonate Admixtures 31 December 2031 1856 1663-39-4 tert-butyl acrylate 300 - expressed as acrylic acid. 31 December 2034 1857 1879-09-0 2,4-dimethyl-6-tert-butyl-phenol Admixtures 31 December 2031 1858 204336-40-3 oxirane, methyl-,polymer with oxirane, mono(3,5,5-trimethylhexyl) ether Admixtures 31 December 2034 1859 2146-71-6 vinyl laurate (dodecanoic acid, ethenyl ester) Organic additions 31 December 2034 1860 2373-38-8 butanedioic acid, sulfo-, 1,4-bis(1,3-dimethylbutyl) ester, sodium salt Organic additions 31 December 2031 1861 2425-77-6 2-hexyldecan-1-ol Admixtures 31 December 2031 1862 24800-44-0 tripropyleneglycol 31 December 2034 1863 24937-78-8 acetic acid ethenyl ester, polymer with ethene Organic additions 31 December 2034 1864 25190-52-7 polypropyleneglycol stearate Admixtures 31 December 2037 1865 25584-83-2 hydroxypropyl acrylate Admixtures 31 December 2031 1866 26172-55-4 5-chloro-2-methyl-2H-isothiazol-3-one Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1867 26221-27-2 poly(vinyl alcohol-co-ethylene) Organic additions 31 December 2037 1868 26399-02-0 2-ethylhexyl oleate Organic additions 31 December 2031 1869 27813-02-1 2-​propenoic acid, 2-​methyl-​, monoester with 1,​2-​propanediol Admixtures 31 December 2031 1870 28098-03-5 octanoic acid, compound with 2-aminoethanol (1:1) Admixtures, organic additions, formwork release agents Additive for formwork release agents 31 December 2028 1871 29736-24-1 acetic acid, 2-hydroxy-2sulfo-, sodium salt (1:2) Organic additions 31 December 2031 1872 353752-63-3 2-propenoic acid, homopolymer, ester with α-methyl-ω-hydroxypoly(oxy–1,2-ethanediyl), graft Organic additions 31 December 2037 1873 36653-82-4 hexadecan-1-ol 31 December 2034 1874 37208-08-5 hydroxybutylcellulose Admixtures 31 December 2028 1875 300-92-5 aluminium distearate For aluminium, refer to Annex V. 31 December 2031 1876 4402-30-6 2-​propanol, 1,​1'-​(methylimino)​bis- Admixtures 31 December 2031 1877 50-81-7 ascorbic acid 31 December 2028 1878 50985-38-1 poly(oxy–1,2-ethanediyl), .alpha.-(4-hydroxybutyl)-.omega.-hydroxy Admixtures 31 December 2034 1879 513-42-8 2-methyl-2-propen-1-ol Admixtures 31 December 2031 1880 51668-30-5 oxirane, methyl-, polymer with oxirane, octadecanoate Admixtures 31 December 2037 1881 52383-89-8 dodecanoic acid, ethenyl ester, polymer with chloroethene and ethene Organic additions 31 December 2037 1882 52668-97-0 oleic acid-polyethyleneglycol-diester Admixtures 31 December 2037 1883 52933-07-0 phosphoric acid, isotridecyl ester Admixtures 31 December 2028 1884 5395-50-6 tetrahydro-1,3,4,6-tetrakis(hydroxymethyl) imidazo[4,5-d]imidazole–2,5(1H,3H)-dione Organic additions 31 December 2031 1885 541-02-6 decamethylcyclopentasiloxane Admixtures 31 December 2028 1886 544-63-8 myristic acid 31 December 2028 1887 55406-53-6 3-iodo-2-propynyl butylcarbamate Admixtures, organic additions, formwork release agents Biocide Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 1888 556-67-2 octamethylcyclotetrasiloxane Admixtures 31 December 2028 1889 557-05-1 zinc distearate Water repellent For zinc, refer to Annex V. 31 December 2031 1890 5625-90-1 N,N'-methylenebismorpholine Admixtures, organic additions, formwork release agents Biocide 0,1 Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 1891 56-87-1 L-lysin 31 December 2037 1892 595585-15-2 D-glucurono-D-gluco-6-deoxy-L-mannan, acetate, calcium magnesium potassium sodium salt Admixtures 31 December 2028 1893 61791-14-8 amines, coco alkyl, ethoxylated Admixtures 31 December 2028 1894 63330-34-7 tert-decanoic acid, ethenyl ester, polymer with ethene and ethenyl acetate Organic additions 31 December 2034 1895 64-17-5 ethanol 31 December 2034 1896 64742-47-8 distillates (petroleum), hydrotreated light Formwork release agents 31 December 2031 1897 64742-48-9 naphtha (petroleum), hydrotreated heavy; low boiling point hydrogen treated naphtha Formwork release agents 0,1 31 December 2028 1898 64742-95-6 solvent naphtha (petroleum), light arom. Formwork release agents 0,1 31 December 2028 1899 65997-04-8 rosin, fumarated Admixtures 31 December 2031 1900 6683-19-8 pentaerythritol tetrakis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate] 31 December 2034 1901 67-56-1 methanol 31 December 2034 1902 67-63-0 2-propanol 31 December 2034 1903 68442-68-2 benzenamine, N-phenyl-, styrenated Organic additions 31 December 2031 1904 69011-36-5 isotridecanol, ethoxylated Admixtures 31 December 2031 1905 71-36-3 1-butanol 31 December 2034 1906 72121-88-1 D-glucopyranuronic acid, polymer with 6-​deoxy-​L-​mannose, D-​glucose and D-​mannose, calcium potassium sodium salt (Welan gum) Admixtures 31 December 2037 1907 74-85-1 ethene Admixtures 31 December 2034 1908 75-21-8 ethylene oxide 0,1 31 December 2028 1909 75-91-2 tert-butyl hydroperoxide (TBHP) Organic additions 31 December 2028 1910 78041-14-2 oxirane, methyl-, polymer with oxirane, ether with 1,2,3-propanetriol (3:1), (9Z)-9-octadecenoate Admixtures 31 December 2037 1911 78-51-3 tributoxyethyl phosphate Admixtures, organic additions, formwork release agents Defoamer Maximum dosage = 0,5 % (w/w) based on the addition or admixture. 31 December 2031 1912 79-06-1 acrylamide 0,1 31 December 2028 1913 79-10-7 acrylic acid 300 - expressed as acrylic acid. 31 December 2034 1914 79-39-0 methacrylamide 0,1 31 December 2034 1915 79-41-4 methacrylic acid 300 – expressed as methacrylic acid. 31 December 2034 1916 8002-13-9 rape oil 31 December 2028 1917 8015-86-9 carnauba wax 31 December 2028 1918 8028-48-6 orange, sweet, extract Admixtures 31 December 2031 1919 8028-89-5 caramel (color) Admixtures 31 December 2031 1920 8042-47-5 white mineral oil (petroleum) Curing compounds 31 December 2031 1921 80-62-6 methacrylic acid, methyl ester 300 - expressed as methacrylic acid. 31 December 2034 1922 818-61-1 acrylic acid, monoester with ethyleneglycol 300 - expressed as acrylic acid. 31 December 2034 1923 82973-76-0 poly(oxy–1,2-ethanediyl), a,a'-(2,2-dimethyl–1,3-propanediyl)bis[w-hydroxy- Admixtures 31 December 2028 1924 868-18-8 sodium tartrate Admixtures 31 December 2031 1925 868-77-9 2-hydroxyethyl methacrylate 300 - expressed as methacrylic acid. 31 December 2034 1926 9003-20-7 acetic acid ethenyl ester, homopolymer Organic additions 31 December 2037 1927 9003-39-8 polyvinylpyrrolidone 31 December 2037 1928 9004-58-4 cellulose, ethyl 2-hydroxyethyl ether Admixtures 31 December 2028 1929 9004-64-2 cellulose, 2-hydroxypropyl ether Admixtures 31 December 2028 1930 9004-74-4 poly(oxy–1,2-ethanediyl), α-methyl-ω-hydroxy- Admixtures 31 December 2037 1931 9004-82-4 sodium lauryl ether sulfate Admixtures 31 December 2028 1932 9005-00-10 stearyl alcohol, ethoxylate (2 EO) Admixtures 31 December 2031 1933 9005-65-6 polyethyleneglycol sorbitan monooleate 31 December 2028 1934 9032-46-6 cellulose, 2-sulfoethyl ether Admixtures 31 December 2028 1935 9036-19-5 (1,1,3,3-tetramethylbutyl)-phenyl-polyethylenglycol Admixtures 31 December 2028 1936 9043-30-5 isotridecanol, ethoxylated Admixtures 31 December 2028 1937 923-02-4 N-(hydroxymethyl)methacrylamide 2,5 31 December 2034 1938 925-60-0 acrylic acid, propylester 300 - expressed as acrylic acid. 31 December 2028 1939 96-33-3 acrylic acid, methyl ester 300 - expressed as acrylic acid. 31 December 2034 1940 97-65-4 itaconic acid 31 December 2034 1941 999-61-1 2-hydroxypropyl acrylate 2,5 - expressed as the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxy-isopropyl ester. 31 December 2028 1942 acetic acid ethenyl ester, polymer with ethene, sodium 2-methyl-2-[(1-oxo-2-propen-1-yl)amino]-1- propanesulfonate and ethenyl tert-decanoate Organic additions 31 December 2034 1943 acrylic acid and methacrylic acid ester of dihydric aliphatic alcohols with chain length C2-C18 Admixtures 31 December 2028 1944 fatty alcohol ethoxylate Admixtures 31 December 2028 1945 polyethylenglycol ether (EO = 1-50) of linear and branched primary alcohols Admixtures 31 December 2028 1946 vinyl ether of monohydric aliphatic saturated alcohols with chain length C1-C18 Admixtures 31 December 2028 1947 isothiazolinone Admixtures, organic additions, formwork release agents Preservative Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2028 EUPL Number EC Number CAS Number Organic cementitious constituent name group name Generic constituent category Technical function Maximum Tolerable Concentration at the tap (MTCtap, cementitious) (μg/l) Total Maximum Tolerable Concentration at the tap (MTC(T)tap, cementitious) in μg/l (A) Conditions of use Expiry date Value for the organic cementitious constituent Values for other relevant chemical species 1948 68439-45-2 alcohols, C6-C12, ethoxylated Admixtures 31 December 2031 1949 68439-50-9 alcohols, C12-C14, ethoxylated Admixtures 1500 31 December 2031 1950 68551-12-2 alcohols, C12-C16, ethoxylated Admixtures 1500 31 December 2031 1951 96130-61-9 alcohols, C9-C11 ethoxylated sulfates, sodium salts Admixtures 1500 31 December 2031 1952 68585-34-2 alcohols, C10-C16, ethoxylated, sulfates, sodium salts Admixtures 1500 31 December 2031 1953 68891-38-3 alcohols, C12-C14, ethoxylated, sulfates, sodium salts Admixtures 1500 31 December 2031 1954 126950-60-5 alcohols, C12-C14, secondary Admixtures 1500 31 December 2031 1955 84133-50-6 alcohols, C12-C14, secondary ethoxylated Admixtures 250 31 December 2031 1956 68439-57-6 alkene (sulfonic acid, C14-C16-alkane hydroxy & C14-C16-alkene sodium salts) Admixtures 1500 31 December 2031 1957 25155-30-0 alkyl aryl sulfonate (sodium dodecylbenzenesulfonate) Admixtures 1500 31 December 2031 1958 85117-50-6 alkyl benzene sulfonate, sodium (mono C10-C14-alkyl derivatives sodium) Admixtures 1500 31 December 2031 1959 70592-80-2 & 1643-20-5 alkyl dimethylamine oxide Admixtures 1500 31 December 2031 1960 68585-47-7 alkyl sulfate, sodium (mono C10-C16-alkyl esters) Admixtures 1500 31 December 2031 1961 68411-30-3 alkylaryl sulfonate (benzenesulfonic acid, C10-C13 derivs, sodium) Admixtures 1500 31 December 2031 1962 68154-99-4 alkylpolyethoxypolypropoxy benzylether Admixtures 31 December 2034 1963 7360-53-4 aluminium formate Admixtures For aluminium, refer to Annex V. 31 December 2031 1964 61788-90-7 amines, coco alkyldimethyl, N-oxides Admixtures 0,1 - expressed as amines 31 December 2031 1965 72906-11-7 alkyl sulfate sodium (mono C9-C13 alkyl esters) Admixtures 300 31 December 2031 1966 68784-08-7 butanedioic acid, sulfo-, C-(2-coco amidoethyl) esters, disodium salts Admixtures 31 December 2031 1967 68603-42-9 coconut diethanolamide (coco N,N-bis hydroxyethyl) Admixtures 31 December 2031 1968 84712-53-8 N-coco sulfosuccinamate, disodium (butanoic acid,4-amino-4-oxy-2-sulfo-,N-coco alkyl derivs) Admixtures 31 December 2031 1969 67762-90-7 dimethyl siloxane reaction products with silica Admixtures 31 December 2031 1970 67701-03-5 fatty acids, C16-C18 (stearic acid) Admixtures 31 December 2031 1971 61791-08-0 fatty acids, coco, reaction products with ethanolamine, ethoxylated Admixtures 31 December 2031 1972 50-99-7 glucose Admixtures 31 December 2031 1973 50-21-5 lactic acid Admixtures 31 December 2034 1974 91078-68-1 naphthalenesulfonic acids, reaction products with formaldehyde, sodium salts Admixtures 31 December 2031 1975 68002-63-1 quaternary ammonium, C14-C18, alkyltrimethyl chlorides Admixtures 300 For ammonium, refer to Annex V. 31 December 2031 1976 61789-40-0 quaternary ammonium compounds, (carboxymethyl)(3-cocoamidopropyl)dimethyl-hydroxides, inner salts Admixtures 300 For ammonium, refer to Annex V. 31 December 2031 1977 73138-82-6, 61790-51-0 resin acids and rosin acids Admixtures 31 December 2031 1978 8050-09-7 rosin Admixtures 31 December 2034 1979 91648-56-5 sodium dodecyl to pentadecyl ether sulfonates Admixtures 1500 31 December 2031 1980 25322-68-3 polyethylene glycol 31 December 2034 1981 57-55-6 propane–1,2-diol (1,2 propylene glycol) 31 December 2034 1982 75-56-9 propylene oxide 0,1 31 December 2028 1983 107-22-2 glyoxal 31 December 2028 1984 1000817-22-0 fatty acids, C8-C18 and C18-unsatd., reaction products with diethanolamine and propylene oxide Admixtures, organic additions, formwork release agents Additive for formwork release agents 31 December 2031 1985 103818-93-5 alcohols, C9-C11, ethoxylated propoxylated Admixtures 31 December 2031 1986 1400790-00-2 alcohols, C9-C11-branched, ethoxylated propoxylated Admixtures 31 December 2031 1987 169107-21-5 alcohols, C9-C11-branched, ethoxylated Admixtures 31 December 2031 1988 25085-46-5 acetic acid ethenyl ester, polymer with chloroethene and ethene Organic additions 31 December 2037 1989 25213-24-5 acetic acid ethenyl ester, polymer with ethenol Admixtures MW > 1000 Da. 31 December 2034 1990 25265-71-8 1,1'-oxydi-2-propanol, mixture of isomers Organic additions 31 December 2034 1991 4080-31-3 3,5,7-triaza-1-azoniatricyclo[3.3.1.13,7]decane,1-(3-chloro-2-propenyl)-, chloride 15 31 December 2031 1992 63148-62-9 polydimethylsiloxane Admixtures, organic additions, formwork release agents Defoamer Maximum dosage = 0,5 % (w/w) based on the addition or admixture. 31 December 2034 1993 64742-52-5 distillates (petroleum), hydrotreated heavy naphthenic; base oil — unspecified Formwork release agents 0,1 31 December 2028 1994 64742-53-6 distillates (petroleum), hydrotreated light naphthenic; base oil — unspecified Formwork release agents 0,1 31 December 2028 1995 64742-55-8 distillates (petroleum), hydrotreated light paraffinic Curing compounds 0,1 31 December 2028 1996 64742-56-9 distillates (petroleum), solvent-dewaxed light paraffinic; base oil — unspecified Formwork release agents 0,1 31 December 2028 1997 66455-15-0 alcohol, C10-C14, ethoxylated Admixtures 31 December 2031 1998 67701-01-3 fatty acid, C12-C18 31 December 2031 1999 67701-05-7 fatty acid, C16-C18 and C18-unsaturated Admixtures, organic additions, formwork release agents Additive for formwork release agents 31 December 2031 2000 67701-08-0 fatty acids, C8-C18 and C18-unsaturated Admixtures, organic additions, formwork release agents Additive for formwork release agents 31 December 2031 2001 67701-26-2 glycerides, C12-C18 (triglycerides C12-C18 (even numbered)) Admixtures, organic additions, formwork release agents Additive for formwork release agents 31 December 2031 2002 68131-39-5 alcohols, C12-C15, ethoxylated Admixtures 31 December 2031 2003 68131-40-8 alcohols, C11-C15-secondary, ethoxylated Admixtures 31 December 2031 2004 68154-97-2 alcohols, C10-C12, ethoxylated propoxylated Admixtures 31 December 2031 2005 68439-46-3 alcohols, C9-C11, ethoxylated Admixtures 31 December 2031 2006 68439-49-6 polyethyleneglycol (EO = 1-50) ethers of linear and branched primary (C8-C22) alcohols 31 December 2034 2007 68476-78-8 molasses Admixtures 31 December 2031 2008 68526-86-3 alcohols, C11-C14-Iso Admixtures 31 December 2031 2009 68551-07-5 alcohols, C8-C18 Admixtures 31 December 2031 2010 68611-44-9 silane, dichlorodimethyl-, reaction products with silica 31 December 2031 2011 68920-66-1 alcohols, C16-C18 and C18-unsatd., ethoxylated Admixtures 31 December 2031 2012 68954-91-6 poly(oxy–1,2-ethanediyl), α-(3-carboxy-1-oxosulfopropyl)-ω-hydroxy-, C10-C12-alkyl ethers, disodium salts Admixtures 31 December 2037 2013 69013-18-9 alcohols, C8-C18, ethoxylated propoxylated Admixtures 31 December 2031 2014 69227-21-0 alcohols, C12-C18, ethoxylated propoxylated Admixtures 31 December 2031 2015 70955-07-6 alcohols, tallow, propoxylated Admixtures 31 December 2031 2016 71786-60-2 ethanol, 2,2'-iminobis-, N-C12-C18-alkyl derivs. Admixtures, organic additions, formwork release agents Additive for formwork release agents 31 December 2031 2017 78330-21-9 alcohols, C11-C14-iso-, C13-rich, ethoxylated Admixtures 31 December 2031 2018 8002-74-2 paraffin waxes and hydrocarbon waxes Organic additions 31 December 2031 2019 85409-27-4 resin acid Admixtures 31 December 2031 2020 85586-25-0 rapeseed oil methyl ester 31 December 2031 2021 93-83-4 N,N-bis(2-hydroxyethyl)oleamide Admixtures, organic additions, formwork release agents Additive for formwork release agents 31 December 2031 2022 97043-91-9 alcohols, C9-C16, ethoxylated Admixtures 31 December 2031 rapidmeent fatty acid polyglycol esters 31 December 2034 2024 methallylsulfonic acid, salts 0,25 31 December 2031 2025 polycarboxylate ether made of a combination of the following Admixtures poly(oxy–1,2-ethanediyl), α-(3-methyl-3-buten-1-yl)-ω-hydroxy- (CAS No. 110412-77-6) MTCtap = 1 μg/l isoprenol MTCtap = 2,5 μg/l Oligomers < 1000 Da < 1 %; residual contents of acrylic acid < 0,05 %; hydroxypropyl acrylate (CAS No. 25584-83-2) < 0,0025 %; ethylene oxide (CAS No.75-21-8) < 0,0005 %. 31 December 2034 2026 melamine sulfonates Admixtures 31 December 2031 2027 naphthalene sulfonates Admixtures 31 December 2031 2028 substances releasing formaldehyde Admixtures, organic additions, formwork release agents Preservative Only to be used as in-can preservative; no antimicrobial effects on the surface of the product, to be tested in accordance with Sections 7.3 and 8.5, Annex III of Commission Implementing Decision (EU) 2024/368. 31 December 2031 Note 1: Explanation of the notes in Tables 2 and 3 Note 2: Scope of an authorisation Note 3: Additional conditions of use

acrylic acid (CAS No. 79-10-7), and/or

poly(oxy–1,2-ethanediyl), α-[4-(ethenyloxy)butyl]-ω-hydroxy- (CAS No. 126682-74-4), and/or

poly(oxy–1,2-ethanediyl), α-(3-methyl-3-buten-1-yl)-ω-hydroxy- (CAS No. 110412-77-6), and/or

hydroxypropylacrylate (CAS No. 25584-83-2), and/or

polyethylene glycol monomethallylether (CAS No. 31497-33-3)

Table 1 Table 2 Table 3 Notes: 1. EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS List of generic constituents of cementitious materials Positive list of individual organic constituents for cementitious materials European positive lists of groups of organic constituents for cementitious materials

i.A.B.

The meaning of the notes provided in Tables 2 and 3 is as follows: Total Maximum Tolerable Concentration at the tap (MTC(T)tap, cementitious) means the maximum permitted concentration of specified substances migrating from cementitious materials into water intended for human consumption as total of the element or ion indicated in Annex 5. Relevant chemical species are those identified in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365.

Table 1 Table 2 Table 3 Notes: 1. 2. EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS List of generic constituents of cementitious materials Positive list of individual organic constituents for cementitious materials European positive lists of groups of organic constituents for cementitious materials

i.

Where an organic cementitious constituent appearing on the list as an individual entry is also covered by a group entry, the conditions of use and specifications and expiry dates applying to this organic cementitious constituent shall be those indicated in the individual entry exclusively.

ii.

Where a organic cementitious constituent appears on the list as its anhydrous form, its approval shall be considered to covers its hydrated form.

iii.

Unless stated otherwise in Tables 2 and 3, the following salts of authorised acids, phenols and alcohols shall be considered covered by that authorisation: aluminium, ammonium, barium, calcium, cobalt, copper, europium, gadolinium, iron, lanthanum lithium, magnesium, manganese, potassium, sodium, terbium, and zinc. This is subject to compliance with the corresponding MTCtap, cementitious value for the element or ion which is the same as shown in Annex V for cementitious materials. In certain cases, where the safety assessment indicates concerns on the use of the free acids, only the salts should be authorised by indicating in the list the name as … acid(s), salts.

iv.

For the purposes of the first European positive list of organic cementitious constituents, polymers used as constituents of admixtures which are exclusively manufactured with authorised monomers shall be considered covered by those authorisations.

v.

After the first European positive list of organic cementitious constituents, in the case of polymer, the entry in the European positive list shall be for the monomer(s) and other reactant(s) used in the polymer, and polymers manufactured from authorised monomer(s) and other reactant(s) shall be considered to be covered by these entries.

vi.

In the case of polymers used as constituents of fibres or additives, points v to viii of Section 2 of Annex I shall apply mutatis mutandi.

vii.

Fibres made of metallic compositions approved on the European positive list for metallic materials, are also authorised for use in cementitious materials.

viii.

An entry in Table 1 covers a nanoform only when it is explicitly stated in the approval of that entry.

Table 1 Table 2 Table 3 Notes: 1. 2. 3. EUROPEAN POSITIVE LIST OF ORGANIC CONSTITUENTS OF CEMENTITIOUS MATERIALS List of generic constituents of cementitious materials Positive list of individual organic constituents for cementitious materials European positive lists of groups of organic constituents for cementitious materials

i.

Only biocidal active substances of Product-type 6 (Preservatives for products during storage) in accordance with Regulation (EU) No 528/2012 may be used as organic cementitious constituents.

ANNEX IV Table 1 Notes: 1.A. 2. EUROPEAN POSITIVE LIST OF COMPOSITIONS OF ENAMELS, CERAMIC AND OTHER INORGANIC MATERIALS European positive lists of compositions of enamels, ceramics and other inorganic materials

EUPL Number Material category Material sub-category Accepted composition Accepted inorganic composition constituents Relevant chemical species to be analysed in the migration waters (A) Maximum Tolerable Concentration at the tap for relevant chemical species (MTCtap, inorganic) in μg/l (A) Conditions of use Expiry date Constituent identity Minimum concentration (% w/w) Maximum concentration (% w/w) 2029 Enamel Enamel Enamel SiO2 25 80 Al, B, Ba, Cd, Ce, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sb, Sr, Ti, Zr For elements, refer to Annex V. 31 December 2031 B2O3 0 20 Na2O 0 30 K2O 0 10 Li2O 0 10 CaO 0 10 BaO 0 15 SrO 0 5,0 Sb2O3 0 1,0 MgO 0 5,0 CeO2 0 15 ZnO 0 10 Al2O3 0 5,0 CoO 0 5,0 NiO 0 3,0 CuO 0 3,0 MnO2 0 5,0 Fe2O3 0 5,0 MoO3 0 5,0 P2O5 0 5,0 SnO2 0 5,0 TiO2 0 16 ZrO2 0 30 F 0 10 Cr2O3 0 3,0 2030 Enamel Glasses Borosilicate glass SiO2 80 100 Al, B, Cd, Pb For elements, refer to Annex V. 31 December 2031 B2O3 7,0 13 Al2O3 0 2,4 Na2O 0 2,0 K2O 0 2,0 2031 Enamel Glasses Soda-lime glass SiO2 60 85 Al, B, Ba, Cd, Ce, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Sr, Ti, Zr For elements, refer to Annex V. 31 December 2031 B2O3 0 15 Al2O3 0 10,0 Na2O 0 15 K2O 0 5,0 CaO 0 15 MgO 0 5,0 BaO 0 5,0 SrO 0 1,0 Sb2O3 0 1,0 CeO2 0 1,0 CoO 0 1,0 NiO 0 1,0 CuO 0 1,0 MnO2 0 1,0 Fe2O3 0 1,0 MoO3 0 1,0 SnO2 0 1,0 TiO2 0 1,0 ZrO2 0 1,0 Cr2O3 0 1,0 2032 Ceramics Oxide ceramics Al2O3 and SiO2 ceramics Al2O3 0 99,99 Al, B, Ba, Cd, Cr, Mn, Pb, Sr, Ti, Y, Zr For elements, refer to Annex V. Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 SiO2 0 92 B2O3 0 2,0 BaO 0 0,2 CaO 0 8,0 Cr2O3 0 2,0 Fe2O3 0 4,0 K2O 0 3,0 MgO 0 3,0 MnO2 0 3,5 Na2O 0 3,0 P2O5 0 0,1 SrO 0 0,5 TiO2 0 2,5 ZrO2 0 3,0 Y2O3 0 0,4 2033 Ceramics Oxide ceramics ZrO2 ceramics Al2O3 0 95 Al, Cd, Hf, Pb, Pr, Ti, Y, Zr For elements, refer to Annex V. Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 ZrO2 5,0 99 HfO2 0 2,0 MgO 0 4,0 CaO 0 0,1 Fe2O3 0 0,1 SiO2 0 5,0 TiO2 0 0,5 Y2O3 0 8,5 Pr2O3 0 0,2 Na2O 0 0,1 K2O 0 0,1 2034 Ceramics Oxide ceramics Hard ferrite ceramics FeO/Fe2O3 80 95 Al, Ba, Bi, Cd, Cr, Cu, Mn, Ni, Pb, Sr For elements, refer to Annex V. Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 Al2O3 0 3,0 BaO 0 12 CaO 0 3,0 Cr2O3 0 0,1 Bi2O3 0 0,4 MnO 0 3,0 NiO 0 0,1 P2O5 0 0,1 SiO2 0 5,0 SrO 0 12 MgO 0 0,1 Na2O 0 0,1 ZnO 0 0,1 CuO 0 0,1 2035 Ceramics Non-oxide ceramics Silicon carbide (SiC) ceramics SiC 78 100 Al, B, Cd, Ni, Pb, Ti, Y, Zr Benzo-(a)-pyrene Sum of 4 PAHs:Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 Si 0 22 Al 0 2,0 Al2O3 0 5,0 B 0 3,0 C 0 5,0 Ca 0 0,1 Fe 0 0,2 Fe2O3 0 3,0 Na 0 0,1 Ni 0 0,1 SiO2 0 3,0 Ti 0 0,2 Y2O3 0 3,0 ZrB2 0 11 MgO 0 0,1 2036 Ceramics Non-oxide ceramics Silicon carbide with free carbon (SISIC-C) ceramics SiC 55 90 Al, B, Cd, Ni, Pb, Ti Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 C 5,0 40 Al 0 0,2 B 0 0,5 Ca 0 0,1 Fe 0 0,2 Ni 0 0,1 Si 2,0 15 SiO2 0 2,5 Ti 0 0,2 2037 Ceramics Non-oxide ceramics Tungsten carbide (WC) ceramics WC 90 100 Cd, Cr, Mo, Ni, Pb, W Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 Cr3C2 0 1,0 Mo 0 1,0 Ni 0 8,0 2038 Ceramics Non-oxide ceramics Silicon nitride (SN) ceramics Si3N4 78 97 Al, Cd, La, Pb, Ti, Y, Zr For elements, refer to Annex V. Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 Al2O3 0 7,0 CaO 0 2,0 Fe2O3 0 1,0 La2O3 0 6,0 MgO 0 4,0 SiO2 0 7,0 TiO2 0 5,0 Y2O3 0 3,0 ZrO2 0 3,0 2039 Ceramics Ceramic materials made of carbon Graphites No specific composition requirements. The starting materials include lignite, coal or petrol coke, which are mixed with a binding agent such as tar or a plastic resin, and then annealed at 600 °C to 1000 °C. This produces carbon graphites, which are used for applications such as slide bearings, sealing rings or pump components. In another optional manufacturing step, the graphitisation, these carbon graphites are annealed once again at up to 3000 °C. This causes the individual graphite crystals to enlarge, causing an increase in density. Contaminants are burned off to improve purity. Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. First annealing at 600 °C to 1000 °C; second annealing at up to 3000 °C. For graphites that have been impregnated with an organic resin, the resin should be assessed separately based on the coating guideline. 31 December 2031 2040 Ceramics Ceramic materials made of carbon Amorphous carbon layer No specific composition requirements. These coatings may be produced using a number of different methods. This leads to the formation of crystalline layers of graphite and diamond. Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 2041 Ceramics Ceramic materials made of carbon Carbon fibres No specific composition requirements. These fibres are made of organic fibres, such as viscose or polyacrylonitrile fibres, that are transformed into carbon by pyrolysis. Cd, Pb Benzo-(a)-pyrene Sum of 4 PAHs: Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Indeno[1,2,3-cd]pyrene For elements, refer to Annex V. benzo-(a)-pyrene MTCtap = 0,001 Sum of benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene MTCtap = 0,01 Lead and cadmium may be present only as impurities in small quantities that are technically unavoidable and have not been added intentionally. The content of these elements shall be less than 0,02 % (w/w) and has to be declared in the composition. 31 December 2031 2042 Other inorganic materials Mixed metal oxides Mixed metal oxides (MMO) coatings of iridium oxide and tantalum oxide IrO2 50 85 No migration tests required for Ir or Ta. Used as coatings of titanium anodes. Maximum layer thickness: 20 μm. 31 December 2031 Ta2O5 15 50 Note 1: Explanation of the notes in Table 1 The meaning of the note provided in Table 1 is as follows: Relevant chemical species are those identified in accordance in accordance with Section 3, Annex IV to Commission Implementing Decision (EU) 2024/365. Note 2: Additional conditions of use For the purposes of this positive list, for elements of relevance in the migration water corresponding MTCtap, inorganics values shown in Annex V for enamels, ceramic and other inorganic materials shall apply

ANNEX V Table 1 Notes: MTCTAP FOR METALS OF RELEVANCE IN THE MIGRATION WATER MTCtap for metals for the specific material types

The following is provided for information purposes only: Metal Reference value Organic materials Metallic materials Cementitious materials Enamels, ceramic and other inorganic materials MTCtap, organics [μg/l] Allocation factor MTCtap, metallic [μg/l] Allocation factor MTCtap, cementitious [μg/l] Allocation factor MTCtap, inorganic [μg/l] Allocation factor Aluminium Al Parametric value in Part C, Annex I of Directive (EU) 2020/2184 20 10% 100 50% 30 15% 100 50% Ammonium NH4+ Parametric value in Part C, Annex I of Directive (EU) 2020/2184 50 10% 50 10% Antimony Sb Parametric value in Part B, Annex I of Directive (EU) 2020/2184 1,0 10% 5,0 50% 1,0 10% 1,0 10% Arsenic As Parametric value in Part B, Annex I of Directive (EU) 2020/2184 5,0 50% 1,0 10% Barium Ba Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 50 10% 50 10% 50 10% Bismuth Bi Not available Not available Not available Boron B Parametric value in Part B, Annex I of Directive (EU) 2020/2184 150 10% 150 10% 150 10% Cadmium Cd Parametric value in Part B, Annex I of Directive (EU) 2020/2184 2,5 50% 0,5 10% 0,25 5% Calcium Ca Not applicable Cerium Ce Not available Not available Not available Chromium Cr Parametric value in Part B, Annex I of Directive (EU) 2020/2184, until 12 January 2036 5,0 10% 25 50% 5,0 10% 5,0 10% Parametric value in Part B, Annex I of Directive (EU) 2020/2184, after 12 January 2036 2,5 10% 13 50% 2,5 10% 2,5 10% Cobalt Co Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10% 2,5 10% 13 50% Copper Cu Parametric value in Part B, Annex I of Directive (EU) 2020/2184 200 10% 1800 90% 200 10% 200 10% Europium Eu Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10% 2,5 10% Fluoride F- Parametric value in Part B, Annex I of Directive (EU) 2020/2184 150 10% 150 10% Gadolinium Ga Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10% 2,5 10% Hafnium Hf Not available Not available Iron Fe Parametric value in Part C, Annex I of Directive (EU) 2020/2184 20 10% 100 50% 20 10% 20 10% Lanthanum La Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10% 2,5 10% 13 50% Lead Pb Parametric value in Part B, Annex I of Directive (EU) 2020/2184 2,5 50% 0,5 10% 0,25 5% Lithium Li Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 30 10% 30 10% 30 10% Magnesium Mg Not applicable Manganese Mn Parametric value in Part C, Annex I of Directive (EU) 2020/2184 5,0 10% 25 50% 5,0 10% 25 50% Molybdenum Mo Not available Not available Not available Nickel Ni Parametric value in Part B, Annex I of Directive (EU) 2020/2184 10 50% 2,0 10% 2,0 10% Potassium K Not applicable Praseodymium Pr Not available Not available Selenium Se Parametric value in Part B, Annex I of Directive (EU) 2020/2184 10 50% Sodium Na Not applicable Strontium Sr Not available Not available Terbium Tb Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 2,5 10% Tin Sn Not available Titanium Ti Not available Not available Not available Tungsten W Specific Migration Limit (SML) for entry FCM substance No. 1064 set out in Annex I of Commission Regulation (EU) No 10/2011 2,5 10% 2,5 10% 2,5 10% Vanadium V Not available Not available Yttrium Y Not available Not available Zinc Zn Specific Migration Limit (SML) set out in Annex II of Commission Regulation (EU) No 10/2011 250 10% 2250 90% 250 10% Zirconium Zr Not available Not available Not available Not applicable means that the metal is not hazardous and no MTCtap applies.

MTCTAP FOR METALS OF RELEVANCE IN THE MIGRATION WATER

(a) Reference value;

(b) Allocation factor;

(c) MTCtap for metallic materials.

Versions

1. 2024-01-23

Cited by

• Commission Implementing Decision (EU) 2024/365 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards methodologies for testing and accepting starting substances, compositions and constituents to be included in the European positive lists (Text with EEA relevance) Decision · Grade B

  Where a polymer is intended for use in an organic material or a cementitious material, the testing and acceptance methodologies shall be applied to the monomer, pre-polymer or polymer in accordance with the rules set out in points v to viii of Annex I and points iii and iv of Annex III to Commission Implementing Decision (EU) 2024/367.

• Commission Implementing Decision (EU) 2024/365 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards methodologies for testing and accepting starting substances, compositions and constituents to be included in the European positive lists (Text with EEA relevance) Decision · Grade B

  a Maximum Tolerable Concentration at the tap (MTCtap) value for the starting substance or organic cementitious constituent is set in the corresponding Annex to Commission Implementing Decision (EU) 2024/367 following a decision by the Commission on an application for a starting substance, composition or organic cementitious constituent that has been submitted to ECHA under Article 3 of Commission Delegated Regulation (EU) 2024/369 and the applicant submits at least any new or updated information available as from the date of the Commission’s decision;

• Commission Implementing Decision (EU) 2024/365 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards methodologies for testing and accepting starting substances, compositions and constituents to be included in the European positive lists (Text with EEA relevance) Decision · Grade B

  a MTCtap value for the relevant chemical species in the applicable material type is set in the corresponding Annex to Implementing Decision (EU) 2024/367 following a decision by the Commission on an application for a starting substance, composition or constituent that has been submitted to ECHA under Article 4 of Delegated Regulation (EU) 2024/369 and the applicant submits at least any new or updated information available as from the date of the Commission’s decision;

• Commission Implementing Decision (EU) 2024/365 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards methodologies for testing and accepting starting substances, compositions and constituents to be included in the European positive lists (Text with EEA relevance) Decision · Grade B

  a MTCtap value for the relevant chemical species in the applicable material type is set under the corresponding Annex of Commission Implementing Decision (EU) 2024/367 following a decision by the Commission on an application for a starting substance, composition or organic cementitious constituent that has been submitted to ECHA under Article 4 of Commission Delegated Regulation (EU) 2024/369, in which case that MTCtap value may be used for the purpose of Part 4 of Section 2 provided that it may not be impacted by information not included in the previous application for the concerned starting

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Starting substances used in the formulation, listed in the European positive list of starting substances for organic materials set out in Annex I of Commission Implementing Decision (EU) 2024/367 and for which an MTCtap applies;

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Substances like impurities, degradation or reaction products specified in the condition of use of the European positive list of starting substances for organic materials set out in Annex I of Commission Implementing Decision (EU) 2024/367 used in the formulation;

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  All substances set out in Table 4 of Annex I of Commission Implementing Decision (EU) 2024/367 of starting substances for organic materials if stabilizers with alkylphenol structural moieties are used;

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Starting substances used in the formulation, their impurities, degradation and reaction products not listed in the European positive list of starting substances for organic materials set out in Annex I of Commission Implementing Decision (EU) 2024/367, but accepted under section 2.2.3 (b) of this Annex;

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Aluminium, ammonium, barium, cobalt, copper, europium, gadolinium, iron, lanthanum, lithium, manganese, terbium and/or zinc, if the respective salts of authorised acids, phenols or alcohols, authorised in accordance with note 2. Scope of an authorisation, point ii. of the Annex I of Commission Implementing Decision (EU) 2024/367 are used;

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Starting substances of polymeric substances authorised in accordance with note 2. Scope of an authorisation, point iii. of the Annex I of Commission Implementing Decision (EU) 2024/367 for which an MTCtap applies;

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Starting substances of pre-polymers and natural or synthetic polymers authorised in accordance with note 2. Scope of an authorisation, point v. of the Annex I of Commission Implementing Decision (EU) 2024/367 for which an MTCtap applies;

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Relevant substances The formulation shall be evaluated and compared with the accepted starting substances of the European positive list of starting substances for organic materials set out in Annex I of Commission Implementing Decision (EU) 2024/367. One of the objectives of the evaluation is to define the relevant substances, which shall be analysed in the migration water. The relevant substances are: For multilayer materials, the relevant substances shall be determined for each layer between the total barrier and the drinking water individually.

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  starting substances listed in the European positive list of starting substances for organic materials set out in Annex I of Commission Implementing Decision (EU) 2024/367; or

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Acceptance of starting substances Organic materials shall only be made of : The relevant notes of the Annex I to Commission Implementing Decision (EU) 2024/367 establishing the European positive list of starting substances for organic materials shall be considered in the acceptance of starting substances.

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Testing residual content of substances (QM/QMA) For starting substances with a maximum quantity (QM or QMA) restriction set out in the European positive list of starting substances for organic materials of Annex I of Commission Implementing Decision (EU) 2024/367, its residual content in the product shall be analysed.

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Formulation Starting substances of the formulation listed in the European positive list of starting substances for organic materials set out in Annex I of Commission Implementing Decision (EU) 2024/367.

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Pass/fail criteria for relevant substances The following requirements shall apply to the cold water migration test: The following requirements shall apply to the warm/hot water migration test: The measured substance concentrations in the migration water from the successive migration periods shall be used to assess the trend. However, if Ctap in the relevant migration period is below 1/10 of MTCtap, no trend analysis is required. For ions, the MTCtap,organics of Table 1 in Annex V to Commission Implementing Decision (EU) 2024/367 shall apply.

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Pass/fail criteria for residual content of substances (QM and QMA) The maximum quantity (QM and QMA) limits of the European positive list of starting substances for organic materials set out in Annex I of Commission Implementing Decision (EU) 2024/367 shall apply independently of the product group of final organic materials.

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Accepted compositions The compositions of the final metallic materials and platings shall comply with compositions listed in the European positive list of compositions for metallic materials in Annex II of Commission Implementing Decision (EU) 2024/367 established in accordance with Article 11(2) (b) of the Directive and fulfil the limitations set out in the European positive list in respect of their use for certain product groups and the use of these products. Categorisation of products in product groups for metallic materials is set out in Table 2 of Annex II to Commission Implementing Decis

• Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption (Text with EEA relevance) Decision · Grade B

  Relevant substances For plated products, relevant substances shall be identified based on the composition of the plating listed in the European positive list of compositions of metallic compositions in Annex II of Commission Implementing Decision (EU) 2024/367.