Address https://gelex.eu/eli/EU/regulation/2004/2271@2004-12-22/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
3. ANNEX
4. ANNEX I
5. ANNEX II

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 26 thereof,

Having regard to the proposal from the Commission,

Whereas:

(1) It is in the interest of the Community to suspend partially or totally the autonomous common customs tariff duties for a number of new products not listed in the Annex to Council Regulation (EC) No 1255/96 of 27 June 1996 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products.

(2) A number of products which are referred to in the said Regulation should be withdrawn from the list in the Annex because it is no longer in the Community’s interest to maintain suspension of autonomous common customs tariff duties or because the description needs to be altered in order to take account of technical product developments and economic trends on the market.

(3) Accordingly, products whose description needs to be altered should be regarded as new products.

(4) It is therefore appropriate to amend Regulation (EC) No 1255/96 accordingly.

(5) Since this Regulation is to apply from 1 January 2005, it should enter into force immediately,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EC) No 1255/96 is amended as follows:

1) the products set out in Annex I to this Regulation are inserted;

2) the products for which the codes are set out in Annex II to this Regulation are deleted.

Article 2

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 January 2005.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 22 December 2004. For the Council The President C. Veerman

ANNEX

ANNEX I

CN Code TARIC Description Rate of autonomous duty (%) ex20059080 70 Bamboo shoots, prepared or preserved, in immediate packings of a net content exceeding 5 kg 0 ex21061020 10 Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate 0 ex23099099 20 Calcium sodium phosphate, with a fluorine content of 0,005 % or more but less than 0,2 % by weight on the dry anhydrous product, for use in the manufacture of additives for animal feeding 0 ex29049085 30 5-Nitro-1,2,4-trichlorobenzene 0 ex29089000 40 3-Nitro-p-cresol 0 ex29147000 50 3'-Chloropropiophenone 0 ex29190090 30 Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate] 0 ex29222900 15 N-Methyl-2-(3,4-dimethoxyphenyl)ethylamine 0 ex29242995 75 3-Amino-p-anisanilide 0 ex29242995 95 N-{3-[3-(Dimethylamino)prop-2-enoyl]phenyl}-N-ethylacetamide 0 ex29280090 70 Tetrakis(4-methylpentan-2-oximino)silane 0 ex29299000 20 Ethyl isocyanoacetate 0 ex29310095 84 Methylbis(4-methylpentan-2-oximino)vinylsilane 0 ex29329985 20 (2-Butylbenzofuran-3-yl) (4-hydroxy-3,5-diiodophenyl) ketone 0 ex29331990 20 4-Amino-1-methyl-3-propylpyrazole-5-carboxamide 0 ex29335995 15 (2R)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a] pyrazin-7(8H)-yl]-1-(2,4,5-trifluorophenyl)butyl-2-ammonium phosphate monohydrate 0 ex29339990 40 trans-4-Hydroxy-L-proline 0 ex29339990 85 Pyrrolidine 0 ex29349990 80 Oblimersen sodium (INNM) 0 ex37079090 10 Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-methylethyl acetate and 1-methoxypropan-2-ol 0 ex37079090 20 Anti-reflection coating, consisting of a copolymer of hydroxystyrene and methyl methacrylate, modified with chromophore groups, containing by weight not more than 10 % of polymer, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate 0 ex37079090 40 Anti-reflection coating, consisting of amino-resin and modified phenolic resin, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate, containing by weight 15 % or more but not more than 24 % of both polymers taken together 0 ex37079090 50 Anti-reflection coating, containing by weight: 0 ex38081090 40 Spinosad (ISO) 0 ex38159090 81 Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate 0 ex38170080 10 Mixture of alkylnaphthalenes, containing by weight: 0 ex38249064 06 Mixture of inosine (INN), dimepranol (INN) and acedoben (INN) 0 ex38249099 96 Zirconium dioxide, stabilised with calcium oxide, in the form of a powder 0 ex39072021 10 Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone 0 ex39089000 30 Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine 0 ex39119099 85 Polymer of ethylene and styrene, cross-linked with divinylbenzene, in the form of a suspension 0 ex39191019 10 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film 0 ex39191038 20 ex39199038 10 ex39209928 20 ex39191031 10 Reflecting laminated sheet, consisting of a film of polycarbonate totally embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material, whether or not covered on one side with an adhesive layer and a release sheet 0 ex39191038 30 ex39199031 50 ex39206100 20 ex39191061 91 Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film 0 ex39199061 94 ex39199061 93 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for the protection of the surface of silicon discs 0 ex39199069 93 ex39201089 25 ex39201089 35 Reflecting film, consisting of a layer of polyethylene, a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, a hot-melt adhesive layer, covered on one side or on both sides with a release film 0 ex39211310 10 Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not exceeding 0,10092 0 ex54041090 50 Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not exceeding 1mm, for use in the manufacture of zippers 0 ex56031490 30 Non-wovens, consisting of a central elastomeric film laminated on each side with spunbonded filaments of polypropylene, of a weight of 200 g/m2 or more but not exceeding 300 g/m2 0 ex70021000 10 Balls of E-glass, of a diameter of 20,3 mm or more but not exceeding 26 mm 0 ex81083000 10 Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium 0 ex81089050 10 Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not exceeding 3,1 mm, of a width of 1000 mm or more but not exceeding 1254 mm, for the manufacture of goods of subheading 8714 19 00 0 ex81089050 20 Alloy of titanium, aluminium and vanadium, containing by weight 2,5 % or more but not more than 3,5 % of aluminium and 2,0 % or more but not more than 3,0 % of vanadium, in sheets or rolls, of a thickness of 0,6 mm or more but not exceeding 0,9 mm, of a width not exceeding 1000 mm, for the manufacture of goods of subheading 8714 19 00 0 ex85184091 10 Audio-frequency amplifier unit, comprising at least an audio-frequency amplifier, a static converter and a sound generator, for the manufacture of active loudspeaker boxes 0 ex85229098 48 Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading No 8521 0 ex85299081 43 Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply 0 ex90029090 60 Lenses, mounted, for use in the manufacture of projection TV 0

30 % or more but not more than 40 % of cyclohexanone,

30 % or more but not more than 40 % of 1-methyl-2-pyrrolidone,

20 % or more but not more than 30 % of tetrahydrofurfuryl alcohol

88 % or more but not more than 98 % of hexadecylnaphthalene

2 % or more but not more than 12 % of dihexadecylnaphthalene

ANNEX II

Code NC TARIC ex20059080 70 ex21061020 10 ex29124200 10 ex29162000 40 ex29163900 10 ex29209085 30 ex32089019 60 ex32089019 70 ex32089019 80 ex35040000 30 ex37079090 10 ex37079090 20 ex38159090 81 ex38249099 86 ex39119099 20 ex39191031 10 ex39191038 20 ex39191038 30 ex39191061 91 ex39199031 50 ex39199038 10 ex39199061 93 ex39199061 94 ex39199069 93 ex39201089 25 ex39201089 35 ex39209928 20 ex54041090 50 ex70193200 10 ex70193900 81083000 10 ex81089070 20 ex85409100 91 ex85409100 94

Versions

1. 2004-12-22