Gelex

Council Regulation (EC) No 729/2007 of 25 June 2007 amending Regulation (EC) No 1255/96 temporarily suspending the autonomous common customs tariff duties on certain industrial, agricultural and fishery products

In forceVersion 2007-06-25from 2007-06-28
Grade B

mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.

Ask Gelex about this law

Address https://gelex.eu/eli/EU/regulation/2007/729@2007-06-25/en

Contents
  1. Preamble
    1. Article 1
    2. Article 2
  2. ANNEX
  3. ANNEX I
  4. ANNEX II

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 26 thereof,

Having regard to the proposal from the Commission,

Whereas:

(1) It is in the interest of the Community to suspend partially or totally the autonomous common customs tariff duties for a number of new products not listed in the Annex to Council Regulation (EC) No 1255/96.

(2) A number of products should be withdrawn from the list in the Annex to Regulation (EC) No 1255/96 because it is no longer in the Community’s interest to maintain suspension of autonomous common customs tariff duties or because the description needs to be altered in order to take account of technical product developments and economic trends on the market.

(3) Accordingly, products whose description needs to be altered should be regarded as new products.

(4) The validity period of the measures should be limited in order to enable economic examinations of the individual suspensions in this period to be carried out. Experience has shown the need to provide for an expiry date for the suspensions listed in Regulation (EC) No 1255/96 to ensure that account is taken of technological and economic changes. This should not exclude the premature termination of certain measures or their continuation beyond this period, if economic reasons are submitted, in accordance with the principles laid down in the Commission Communication concerning autonomous tariff suspensions and quotas.

(5) Regulation (EC) No 1255/96 should therefore be amended accordingly.

(6) Having regard to the economic importance of this Regulation, it is necessary to rely on the grounds of urgency provided for in point I.3 of the Protocol on the role of national parliaments in the European Union annexed to the Treaty on European Union and to the Treaties establishing the European Communities.

(7) Since this Regulation is to apply from 1 July 2007, it should enter into force immediately,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EC) No 1255/96 is hereby amended as follows:

1. the products listed in Annex I to this Regulation, together with the corresponding rates of duty and validity periods, shall be inserted;

2. the products for which CN and TARIC codes are set out in Annex II to this Regulation, together with the corresponding rates of duty and validity periods, shall be deleted.

Article 2

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 July 2007.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 25 June 2007. For the Council The President A. Schavan

ANNEX

ANNEX I

CN code TARIC Description Rate of autonomous duty Validity period ex03027000 11 Hard fish roes, fresh, chilled or frozen 0 % 1.7.2007-31.12.2008 ex03027000 31 ex03027000 41 ex03027000 82 ex03027000 83 ex03027000 84 ex03027000 89 ex03038090 10 ex03038090 12 ex03038090 14 ex03038090 16 ex03038090 19 ex20098079 87 Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 65 0 % 1.7.2007-31.12.2011 ex20098099 93 Untreated frozen coconut water, not put up for retail sale 0 % 1.7.2007-31.12.2011 ex28112200 20 Microspheres of amorphous silicon of a particle size of 5 μm (± 1 μm), for use in the manufacture of cosmetic product 0 % 1.7.2007-31.12.2011 ex28112200 30 Balls of porous white silica of a particle size of more than 1 μm for use in the manufacture of cosmetic products 0 % 1.7.2007-31.12.2011 ex28273985 20 Antimony pentachloride of a purity by weight of 99 % or more 0 % 1.7.2007-31.12.2011 ex28459090 10 Helium-3 0 % 1.7.2007-31.12.2011 ex28459090 20 Water enriched at a level of 95 % or more with oxygen-18 0 % 1.7.2007-31.12.2011 ex28459090 30 Carbon monoxide 13C 0 % 1.7.2007-31.12.2011 ex29163900 45 2-Chlorobenzoic acid 0 % 1.7.2007-31.12.2011 29209040 Triethyl phosphite 0 % 1.7.2007-31.12.2011 ex29215119 40 p-Phenylenediamine 0 % 1.7.2007-31.12.2011 ex29241900 60 N,N-Dimethylacrylamide 0 % 1.7.2007-31.12.2011 ex29269095 61 m-(1-Cyanoethyl)benzoic acid 0 % 1.7.2007-31.12.2011 ex29291090 80 1,3-Bis(isocyanatomethyl) benzene 0 % 1.7.2007-31.12.2011 ex29309085 78 4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol 0 % 1.7.2007-31.12.2011 ex29322985 60 6′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one 0 % 1.7.2007-31.12.2011 ex29322985 71 6′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one 0 % 1.7.2007-31.12.2011 ex29322985 72 2′-[Bis(phenylmethyl)amino]-6′-(diethylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one 0 % 1.7.2007-31.12.2011 ex29332100 70 α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide 0 % 1.7.2007-31.12.2011 ex29333999 50 N-Fluoro-2,6-dichloropyridinium tetrafluoroborate 0 % 1.7.2007-31.12.2011 ex29339990 81 1,2,3-Benzotriazole 0 % 1.7.2007-31.12.2011 ex29339990 82 Tolyltriazole 0 % 1.7.2007-31.12.2011 ex37071000 40 Sensitising emulsion, containing: dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate 0 % 1.7.2007-31.12.2011 ex38159090 71 Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol 0 % 1.7.2007-31.12.2011 ex39031900 30 Crystalline polystyrene with a melting point of 268 °C or more but not more than 272 °C and a setting point of 247 °C or more but not more than 252 °C, whether or not containing additives and filling material 0 % 1.7.2007-31.12.2011 ex39042200 91 Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings 0 % 1.7.2007-31.12.2008 ex39269097 80 ex39073000 40 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of heading No 8533, 8535, 8536, 8541, 8542 or 8548 0 % 1.7.2007-31.12.2008 ex39169015 10 ex39269097 70 ex39191038 40 Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale 0 % 1.7.2007-31.12.2011 ex39205990 10 Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls 0 % 1.7.2007-31.12.2011 ex39209928 50 Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film 0 % 1.7.2007-31.12.2011 ex39209959 55 Ion-exchange membranes of fluorinated plastic material 0 % 1.7.2007-31.12.2008 ex50040010 10 Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk 0 % 1.7.2007-31.12.2011 ex50040090 10 Yarn spun entirely from silk, not put up for retail sale 2,5 % 1.7.2007-31.12.2011 ex59070090 10 Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding 150 μm 0 % 1.7.2007-31.12.2011 ex70112000 20 Glass cone (funnel) for cathode-ray tube with a diagonal measurement of 508,8 mm or more but not more than 811,0 mm 0 % 1.7.2007-31.12.2011 ex70112000 50 Glass face plate with 0 % 1.7.2007-31.12.2011 ex84079010 10 Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of lawnmowers of sub-heading 843311, mowers with motor of subheading 84332010, rotovators of sub-heading 84322950 or garden shredders of sub-heading 84368099 0 % 1.7.2007-31.12.2011 ex84139100 20 Manganese-silicon-bronze swash plates with a copper content of 58 % or more but not more than 63 % by weight for incorporation into fluid pumps for air conditioners of motor vehicles 0 % 1.7.2007-31.12.2011 ex85013100 30 DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not exceeding 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not exceeding 520 W, calculated with 1550 RPM (± 350 RPM) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) 0 % 1.7.2007-31.12.2011 ex85078030 40 Rectangular lithium-ion-accumulator, with for use in the manufacture of rechargeable power-supply units for incorporation into goods of heading No 8903 0 % 1.7.2007-31.12.2011 ex85299065 70 Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules 0 % 1.7.2007-31.12.2011 ex85393900 20 Cold cathode (CCFL) or External Electrode (EEFL) fluorescent lamps, of a diameter not exceeding 5 mm and with a length of more than 120 mm but not exceeding 1570 mm, for incorporation in backlight units of LCD modules 0 % 1.7.2007-31.12.2011 ex85401111 95 Colour cathode-ray tube with a slot mask, equipped with an electron gun and a deflection yoke and with a screen width/height ratio of 4/3 and a diagonal measurement of the screen of not more than 42 cm 0 % 1.7.2007-31.12.2011 ex85401119 91 Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more 0 % 1.7.2007-31.12.2011 ex90012000 20 Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut, for use in the manufacture of LCD modules 0 % 1.7.2007-31.12.2011 ex90019000 55 ex90019000 70 Polyethylene terephthalate film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90° and a prism pitch of 50 μm 0 % 1.7.2007-31.12.2011

not more than 10 % by weight of naphthoquinonediazide esters,

2 % or more but not more than 20 % by weight of copolymers of hydroxystyrene

not more than 7 % by weight of epoxy-containing derivatives

a light transmission of 52,5 % (± 5 %) at a glass thickness of 11,43 mm and

a diagonal measurement of 512,1 mm or more but not more than 814,2 mm and

dimensions of 341,8 × 440,5 × 94,1 mm (± 1,4 mm) or 359,4 × 454,8 × 80,0 mm (± 1,4 mm) or 358,0 × 454,0 × 90,0 (± 1,4 mm) or 359,4 × 454,8 × 72,0 (± 1,4 mm) or 396,0 × 633,0 × 103,7 mm (± 1,4 mm) or 472,7 × 600,8 × 97,6 mm (± 1,4 mm) or 472,7 × 600,8 × 84,5 mm (± 1,4 mm) or 445,0 × 726,1 × 112,5 mm (± 1,4 mm) or 445,0 × 726,1 × 93,0 mm (± 1,4 mm)

a length of 80 mm or more, but not more than 1000 mm,

a width of 25 mm or more, but not more than 150 mm,

a height of 100 mm or more, but not more than 500 mm,

a weight of 0,5 kg or more, but not more than 30 kg,

a capacity of 20 Ah or more, but not more than 1000 Ah,

ANNEX II

CN code TARIC 03027000 11 03027000 31 03027000 41 03027000 82 03027000 83 03027000 84 03027000 89 03038090 10 03038090 19 37071000 20 39042200 91 39269098 80 39073000 40 39169015 10 39269098 70 39191038 40 39209953 39209959 55 50040010 10 50040090 10 54024900 85 55039090 40 59070090 10 63079010 10 70191910 40 85401119 91 90012000 20 90019000 55 90012000 30 90019000 65

Versions

  1. 2007-06-25