Address https://gelex.eu/eli/EU/regulation/2010/567@2010-06-29/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
3. ANNEX
4. ANNEX
5. ANNEX Ia Goods and technology referred to in articles 2 and 3 1.2.3.4. GENERAL NOTES 1.2. GENERAL TECHNOLOGY NOTE (GTN) 1.2.3.4. (To be read in conjunction with Part C.)
6. A.
7. a.
8. b.
9. c.
10. d.
11. e.
12. f.
13. g.
14. b. Technical note:
15. h.
16. i.
17. j.
18. k.
19. l.
20. m.
21. n.
22. b. Technical Note:
23. ELECTRONICS I.A3. Technical notes: 1.2.
24. 1. a.
25. 3. a.
26. 1. a.
27. B.
28. C.

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Articles 215(1) thereof,

Having regard to Common Position 2006/795/CFSP of 20 November 2006 concerning restrictive measures against the Democratic People’s Republic of Korea,

Having regard to the joint proposal from the High Representative of the Union for Foreign Affairs and Security Policy and the Commission,

Whereas:

(1) In line with Common Position 2006/795/CFSP, Regulation (EC) No 329/2007 in particular restricts the supply, sale, transfer or export to the Democratic People’s Republic of Korea (hereinafter referred to as North Korea) of certain items, materials, equipment, goods and technology, that could contribute to North Korea’s nuclear-related, other weapons of mass destruction-related or ballistic missiles-related programmes, in addition to those determined by the UN Security Council or the Sanctions Committee.

(2) These items are listed in Annex Ia to Regulation (EC) No 329/2007 and need to be revised in order to maintain their effectiveness.

(3) Regulation (EC) No 329/2007 should therefore be amended accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

Regulation (EC) No 329/2007 is hereby amended as follows: Annex Ia to Regulation (EC) No 329/2007 is replaced with the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 29 June 2010. For the Council The President E. Espinosa

ANNEX

ANNEX

(a) Iodine hollow cathode lamps with windows in pure silicon or quartz; (b) Uranium hollow cathode lamps. Pt_a_. 2. Seals; Pt_b_. 2. Internal components; (c) Sealing, testing and measurement equipment. Pt_a_. 3. Turbo-molecular pumps having a flow-rate equal to or greater than 400 l/s; Pt_b_. 3. Roots type vacuum roughing pumps having a volumetric aspiration flow-rate greater than 200 m3/h; Pt_c_. 2. Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps. Grp_materials_facilities_and_equipment. ia0. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A0.001 Hollow cathode lamps as follows: I.A0.002 Faraday isolators in the wavelength range 500 nm – 650 nm. I.A0.003 Optical gratings in the wavelength range 500 nm – 650 nm. I.A0.004 Optical fibres in the wavelength range 500 nm – 650 nm coated with anti-reflecting layers in the wavelength range 500 nm – 650 nm and having a core diameter greater than 0,4 mm but not exceeding 2 mm. I.A0.005 Nuclear reactor vessel components and testing equipment, other than those specified in 0A001, as follows: 0A001 I.A0.006 Nuclear detection systems, other than those specified in 0A001.j. or 1A004.c., for detection, identification or quantification of radioactive materials or radiation of nuclear origin and specially designed components thereof. N.B: For personal equipment refer to I.A1.004 below. 0A001.j. 1A004.c. I.A0.007 Bellows-sealed valves other than those specified in 0B001.c.6., 2A226 or 2B350, made of aluminium alloy or stainless steel type 304, 304L or 316L. 0B001.c.6. 2A226 2B350 I.A0.008 Laser mirrors, other than those specified in 6A005.e., consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica or sapphire). This item does not cover optical systems specially designed for astronomical applications, except if the mirrors contain fused silica. 0B001.g.5. 6A005.e. I.A0.009 Laser lenses, other than those specified in 6A005.e.2, consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica). 0B001.g. 6A005.e.2. I.A0.010 Pipes, piping, flanges, fittings made of, or lined with nickel, or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1. 2B350 I.A0.011 Vacuum pumps other than those specified in 0B002.f.2. or 2B231, as follows: 0B002.f.2. 2B231 I.A0.012 Shielded enclosures for the manipulation, storage and handling of radioactive substances (hot cells). 0B006 I.A0.013 Natural uranium or depleted uranium or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing, other than those specified in 0C001. 0C001 I.A0.014 Detonation chambers having a capacity of explosion absorption of more than 2,5 kg TNT equivalent. (a) Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching; (b) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (c) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine; (d) Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®); (e) Fluoro-elastomers (e.g. Viton ®, Tecnoflon ®); (f) Polytetrafluoroethylene (PTFE). Pt_a_. 2. Capable of an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); or Pt_b_. 2. Having a tensile strength of 415 MPa or more at 298 K (25 °C). (1a) specific modulus exceeding 10 × 106 m; or (2a) specific tensile strength exceeding 17 × 104 m; Pt_a_. 3. Aramid fibrous or filamentary materials having either of the following characteristics: (1a) specific modulus exceeding 3,18 × 106 m; or (2a) specific tensile strength exceeding 76,2 × 103 m; Pt_b_. 3. Glass fibrous or filamentary materials having either of the following characteristics: Pt_c_. 2. Thermoset resin-impregnated continuous yarns, rovings, tows or tapes with a width of 15 mm or less (once prepregs), made from glass fibrous or filamentary materials other than those specified in I.A1.010.a. below; Pt_d_. 2. Carbon fibrous or filamentary materials; Pt_e_. 2. Thermoset resin-impregnated continuous yarns, rovings, tows, or tapes, made from carbon fibrous or filamentary materials; Pt_f_. 2. Polyacrylonitrile (PAN) continuous yarns, rovings, tows or tapes; (g) Para-aramid fibrous or filamentary materials (Kevlar® and other Kevlar®-like fibres). Pt_a_. 4. Made from fibrous or filamentary materials specified in I.A1.009 above; Pt_b_. 4. Epoxy resin matrix impregnated carbon fibrous or filamentary materials (prepregs), specified in 1C010.a., 1C010.b. or 1C010.c., for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm; Pt_c_. 3. Prepregs specified in 1C010.a., 1C010.b. or 1C010.c., when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature. Pt_a_. 5. In forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and 300 mm; and Pt_b_. 5. A mass greater than 5 kg. Pt_a_. 6. Tungsten and tungsten alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm (micrometre) diameter or less with a tungsten content of 97 % by weight or more; Pt_b_. 6. Molybdenum and molybdenum alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm diameter or less with a molybdenum content of 97 % by weight or more; (1) Tungsten and alloys containing 97 % by weight or more of tungsten; (2) Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or (3) Silver infiltrated tungsten containing 80 % by weight or more of tungsten. Pt_c_. 4. Tungsten materials in the solid form, other than those specified in 1C226 having material compositions as follows: Pt_a_. 7. Iron content between 30 % and 60 %; and Pt_b_. 7. Cobalt content between 40 % and 60 %. Grp_materials_and_related_equipment. ia1. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A1.001 Bis(2-ethylhexyl) phosphoric acid (HDEHP or D2HPA) Chemical Abstract Number (CAS): [CAS 298-07-7] solvent in any quantity, with a purity greater than 90 %. I.A1.002 Fluorine gas CAS: [7782-41-4], with a purity of at least 95 %. I.A1.003 Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials: 1A001 I.A1.004 Personal equipment for detecting radiation of nuclear origin, other than that specified in 1A004.c., including personal dosimeters. 1A004.c. I.A1.005 Electrolytic cells for fluorine production, other than those specified in 1B225, with an output capacity greater than 100 g of fluorine per hour. 1B225 I.A1.006 Catalysts, other than those specified in 1A225 or 1B231, containing platinum, palladium or rhodium, usable for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water. 1A225 1B231 I.A1.007 Aluminium and its alloys, other than those specified in 1C002.b.4. or 1C202.a., in crude or semi-fabricated form having either of the following characteristics: The phrase alloys capable of encompasses alloys before or after heat treatment. 1C002.b.4. 1C202.a. I.A1.008 Magnetic metals, of all types and of whatever form, other than those specified in 1C003.a. having an initial relative permeability of 120000 or more and a thickness between 0,05 mm and 0,1 mm. Measurement of initial relative permeability must be performed on fully annealed materials. 1C003.a. I.A1.009 Fibrous or filamentary materials or prepregs, other than those specified in 1C010.a., 1C010.b., 1C210.a. or 1C210.b., as follows: 1C010.a. 1C010.b. 1C210.a. 1C210.b. I.A1.010 Resin-impregnated or pitch-impregnated fibres (prepregs), metal or carbon-coated fibres (preforms) or carbon fibre preforms, as follows: 1C010 1C210 I.A1.011 Reinforced silicon carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in missiles, other than those specified in 1C107. 1C107 I.A1.012 Not used. I.A1.013 Tantalum, tantalum carbide, tungsten, tungsten carbide and alloys thereof, other than those specified in 1C226, having both of the following characteristics: 1C226 I.A1.014 Elemental powders of cobalt, neodymium or samarium or alloys or mixtures thereof containing at least 20 % by weight of cobalt, neodymium or samarium, with a particle size less than 200 μm. Elemental powder means a high purity powder of one element. I.A1.015 Pure tributyl phosphate (TBP) [CAS No 126-73-8] or any mixture having a TBP content of more than 5 % by weight. I.A1.016 Maraging steel, other than those specified by 1C116 or 1C216. The phrase maraging steel capable of encompasses maraging steel before or after heat treatment. Maraging steels are iron alloys generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy. 1C116 1C216 I.A1.017 Metals, metal powders and material as follows: 1C117 1C226 I.A1.018 Soft magnetic alloys, other than those specified in 1C003, having a chemical composition as follows: 1C003 I.A1.019 Not used. I.A1.020 Graphite, other than that specified in 0C004 or 1C107.a., designed or specified for use in Electrical Discharge Machining (EDM) machines. 0C004 1C107.a. (a) Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured bare table; Pt_technical. note. Digital controllers, combined with specially designed vibration test software, with a real-time control bandwidth greater than 5 kHz designed for use with vibration test systems specified in a.; Real-time control bandwidth is defined as the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals. (c) Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured bare table, and usable in vibration test systems specified in a.; (d) Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured bare table, and usable in vibration systems specified in a. (1) Not capable of balancing rotors/assemblies having a mass greater than 3 kg; (2) Capable of balancing rotors/assemblies at speeds greater than 12500 rpm; (3) Capable of correcting unbalance in two planes or more; and (4) Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass; Pt_a_. 2. Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics: (b) Indicator heads designed or modified for use with machines specified in a. above. Pt_a_. 3. A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); or Pt_b_. 2. A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation). Pt_a_. 4. Pressure sensing elements made of or protected by Materials resistant to corrosion by uranium hexafluoride (UF6); and (1) A full scale of less than 200 kPa and an accuracy of better than ± 1 % of full scale; or (2) A full scale of 200 kPa or greater and an accuracy of better than 2 kPa. Pt_b_. 3. Having either of the following characteristics: Pt_a_. 5. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 4. Fluoropolymers; Pt_c_. 2. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 2. Graphite or carbon graphite; (e) Nickel or alloys with more than 40 % nickel by weight; (f) Tantalum or tantalum alloys; (g) Titanium or titanium alloys; (h) Zirconium or zirconium alloys; or (i) Stainless steel. Pt_a_. 6. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 5. Fluoropolymers; Pt_c_. 3. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 3. Graphite or carbon graphite; Pt_e_. 2. Nickel or alloys with more than 40 % nickel by weight; Pt_f_. 2. Tantalum or tantalum alloys; Pt_g_. 2. Titanium or titanium alloys; Pt_h_. 2. Zirconium or zirconium alloys; Pt_i_. 2. Silicon carbide; (j) Titanium carbide; or (k) Stainless steel. Pt_a_. 7. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 6. Ceramics; Pt_c_. 4. Ferrosilicon; Pt_d_. 4. Fluoropolymers; Pt_e_. 3. Glass (including vitrified or enamelled coatings or glass lining); Pt_f_. 3. Graphite or carbon graphite; Pt_g_. 3. Nickel or alloys with more than 40 % nickel by weight; Pt_h_. 3. Tantalum or tantalum alloys; Pt_i_. 3. Titanium or titanium alloys; Pt_j_. 2. Zirconium or zirconium alloys; Pt_k_. 2. Niobium (columbium) or niobium alloys; (l) Stainless steel; (m) Aluminium alloys; or (n) Rubber. Pt_a_. 8. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 7. Fluoropolymers; Pt_c_. 5. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 5. Nickel or alloys with more than 40 % nickel by weight; Pt_e_. 4. Tantalum or tantalum alloys; Pt_f_. 4. Titanium or titanium alloys; or Pt_g_. 4. Zirconium or zirconium alloys. Pt_a_. 9. Fermenters capable of cultivation of pathogenic micro-organisms or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more; Pt_technical_note_. 2. Agitators for fermenters as mentioned in a.above; Fermenters include bioreactors, chemostats and continuous-flow systems. (1) Polymerase chain reaction (PCR)-equipment (2) Genetic sequencing equipment; (3) Genetic synthesizers; (4) Electroporation equipment; (5) Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above; Pt_c_. 6. Laboratory equipment as follows: Pt_d_. 6. Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects; Pt_e_. 5. Ultracentrifuges, rotors and adaptors for ultracentrifuges; Pt_f_. 5. Freeze drying equipment. Pt_a_. 10. Chemical vapour deposition (CVD) production equipment; Pt_b_. 8. Physical vapour deposition (PVD) production equipment; Pt_c_. 7. Production equipment for deposition by means of inductive or resistance heating. Pt_a_. 11. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 9. Fluoropolymers; Pt_c_. 8. Glass (including vitrified or enamelled coatings or glass lining); Pt_d_. 7. Nickel or alloys with more than 40 % nickel by weight; Pt_e_. 6. Tantalum or tantalum alloys; Pt_f_. 6. Titanium or titanium alloys; Pt_g_. 5. Zirconium or zirconium alloys; Pt_h_. 4. Niobium (columbium) or niobium alloys; Pt_i_. 4. Stainless steel; Pt_j_. 3. Wood; or Pt_k_. 3. Rubber. Grp_processing. ia2. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A2.001 Vibration test systems, equipment and components thereof, other than those specified in 2B116: bare table means a flat table, or surface, with no fixture or fittings. 2B116 I.A2.002 Machine tools, other than those specified in 2B001.c. or 2B201.b., for grinding having positioning accuracies with all compensations available equal to or less (better) than 15 μm according to ISO 230/2 (1988) or national equivalents along any linear axis. 2B001.c. 2B201.b. I.A2.002a Components and numerical controls, specially designed for machine tools specified in 2B001, 2B201 or I.A2.002 above. I.A2.003 Balancing machines and related equipment as follows: Indicator heads are sometimes known as balancing instrumentation. 2B119 I.A2.004 Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, other than those specified in 2B225, having either of the following characteristics: Remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of master/slave type or operated by joystick or keypad. 2B225 I.A2.005 Controlled atmosphere heat treatment furnaces or oxidation furnaces capable of operation at temperatures above 400 °C. This item does not cover tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics. 2B226 2B227 I.A2.006 Not used. I.A2.007 Pressure transducers, other than those defined in 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics: For the purposes of 2B230 accuracy includes non-linearity, hysteresis and repeatability at ambient temperature. 2B230 I.A2.008 Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, plate columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: Carbon graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight. 2B350.e. I.A2.009 Industrial equipment and components, other than those specified in 2B350.d., as follows: Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials: This item does not cover vehicle radiators. The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger. 2B350.d. I.A2.010 Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, or vacuum pumps and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: The materials used for gaskets and seals and other implementations of sealing functions do not determine the status of control of the pump. The term rubber encompasses all kinds of natural and synthetic rubbers. 2B350.i. I.A2.011 Centrifugal separators, other than those specified in 2B352.c., capable of continuous separation without the propagation of aerosols and manufactured from: Centrifugal separators include decanters. 2B352.c. I.A2.012 Sintered metal filters, other than those specified in 2B352.d., made of nickel or nickel alloy with more than 40 % nickel by weight. 2B352.d. I.A2.013 Spin-forming machines and flow-forming machines, other than those specified by 2B009, 2B109 or 2B209 and specially designed components therefor. For the purpose of this item, machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines. 2B009 2B109 2B209 I.A2.014 Equipment and reagents, other than those specified in 2B350 or 2B352, as follows: 2B350 2B352 I.A2.015 Equipment, other than that specified in 2B005, 2B105 or 3B001.d., for the deposition of metallic overlays as follows, and specially designed components and accessories therefor: 2B005 2B105 3B001.d. I.A2.016 Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0.5 m3 (500 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials: The term rubber encompasses all kinds of natural and synthetic rubbers. 2B350 (a) Capable of continuously producing, over a time period of eight hours, 10 kV or more, with output power of 5 kW or more with or without sweeping; and (b) Current or voltage stability better than 0,1 % over a time period of four hours. Pt_a_. 2. Inductively coupled plasma mass spectrometers (ICP/MS); Pt_b_. 2. Glow discharge mass spectrometers (GDMS); (c) Thermal ionisation mass spectrometers (TIMS); (d) Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to corrosion by uranium hexafluoride UF6; (1) A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or (2) A source chamber constructed from, lined with or plated with materials resistant to UF6; (e) Molecular beam mass spectrometers having either of the following characteristics: (f) Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides. Pt_a_. 3. Multiphase output capable of providing a power of 40 W or greater; Pt_b_. 3. Capable of operating in the frequency range between 600 and 2000 Hz; and Pt_c_. 2. Frequency control better (less) than 0,1 %. Grp. ia3. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A3.001 High voltage direct current power supplies, other than those specified in 0B001.j.5. or 3A227, having both of the following characteristics: 0B001.j.5. 3A227 I.A3.002 Mass spectrometers, other than those specified in 0B002.g. or 3A233, capable of measuring ions of 200 atomic mass units or more and having a resolution of better than 2 parts in 200, as follows, and ion sources therefor: 0B002.g. 3A233 I.A3.003 Frequency changers or generators, other than those specified by 0B001.b.13. or 3A225, having all of the following characteristics, and specially designed components and software therefor: Frequency changers are also known as converters, inverters, generators, electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives. The functionality specified in this item may be met by certain equipment marketed as: electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives. 0B001.b.13. 3A225 I.A3.004 Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material. (a) Individual semiconductor lasers with an output power greater than 200 mW each, in quantities larger than 100; (b) Semiconductor laser arrays having an output power greater than 20 W. Pt_a_. 2. Titanium-sapphire lasers, Pt_b_. 2. Alexandrite lasers. Pt_a_. 3. Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz; Pt_b_. 3. Recurrence frequency supplies; (c) Pockels cells. Pt_a_. 4. Operating at wavelengths between 300 nm and 800 nm; Pt_b_. 4. An average output power greater than 10 W but not exceeding 30 W; Pt_c_. 2. A repetition rate greater than 1 kHz; and (d) Pulse width less than 100 ns. Pt_a_. 5. Operating at wavelengths between 9 μm and 11 μm; Pt_b_. 5. A repetition rate greater than 250 Hz; Pt_c_. 3. An average output power greater than 100 W but not exceeding 500 W; and Pt_d_. 2. Pulse width less than 200 ns. Grp_and_lasers. ia6. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A6.001 Yttrium aluminium garnet (YAG) rods. I.A6.002 Optical equipment and components, other than those specified in 6A002 or 6A004.b. as follows: Infrared optics in the wavelength range 9 μm– 17 μm and components thereof, including cadmium telluride (CdTe) components. 6A002 6A004.b. I.A6.003 Wave front corrector systems, other than mirrors specified in 6A004.a., 6A005.e. or 6A005.f., for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and deformable mirrors including bimorph mirrors. 6A004.a. 6A005.e. 6A005.f. I.A6.004 Argon ion lasers, other than those specified in 0B001.g.5., 6A005.a.6. and/or 6A205.a., having an average output power equal to or greater than 5 W. 0B001.g.5. 6A005.a.6. 6A205.a. I.A6.005 Semiconductor lasers, other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.b., and components thereof, as follows: Semiconductor lasers are commonly called laser diodes. This item does not cover laser diodes with a wavelength in the range 1,2 μm – 2,0 μm. 0B001.g.5. 0B001.h.6. 6A005.b. I.A6.006 Tunable semiconductor lasers and tunable semiconductor laser arrays, other than those specified in 0B001.h.6. or 6A005.b., of a wavelength between 9 μm and 17 μm, as well as array stacks of semiconductor lasers containing at least one tunable semiconductor laser array of such wavelength. Semiconductor lasers are commonly called laser diodes. 0B001.h.6. 6A005.b. I.A6.007 Solid state tunablelasers, other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.c.1., and specially designed components thereof, as follows: 0B001.g.5. 0B001.h.6. 6A005.c.1. I.A6.008 Neodymium-doped (other than glass) lasers, other than those specified in 6A005.c.2.b., having an output wavelength greater than 1,0 μm but not exceeding 1,1 μm and output energy exceeding 10 J per pulse. 6A005.c.2.b. I.A6.009 Components of acousto-optics, as follows: 6A203.b.4. I.A6.010 Radiation-hardened cameras, or lenses thereof, other than those specified in 6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 103 Gy (silicon) (5 × 106 rad (silicon)) without operational degradation. The term Gy (silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation. 6A203.c. I.A6.011 Tunable pulsed dye laser amplifiers and oscillators, other than those specified in 0B001.g.5., 6A005 and or 6A205.c., having all of the following characteristics: This item does not cover single mode oscillators. 0B001.g.5. 6A005 6A205.c. I.A6.012 Pulsed carbon dioxide lasers, other than those specified in, 0B001.h.6., 6A005.d. or 6A205.d., having all of the following characteristics: 0B001.h.6. 6A005.d. 6A205.d. (a) Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or (b) Specified to function at linear acceleration levels exceeding 10 g; (1) Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for aircraft, land vehicle, vessels (surface or underwater) or spacecraft for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof: (2) Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with Data-Based Referenced Navigation (DBRN) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or DBRN for a period of up to four minutes, of less (better) than 10 metres Circular Error Probable (CEP); (a) Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or (b) Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec. (3) Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof: (a) Inertial navigation systems which are certified for use on civil aircraft by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows: (b) Theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof. (c) Inertial or other equipment using accelerometers specified in 7A001 or 7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations.v (a) A constant power spectral density (PSD) value of 0,04 g2/Hz over a frequency interval of 15 to 1000 Hz; and (b) The PSD attenuates with a frequency from 0,04 g2/Hz to 0,01 g2/Hz over a frequency interval from 1000 to 2000 Hz; (1) Input random vibration with an overall magnitude of 7,7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following: (2) A roll and yaw rate equal to or greater than + 2,62 radian/s (150 deg/s); or (3) According to national standards equivalent to 1. or 2. above. Grp_and_avionics. ia7. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A7.001 Inertial navigation systems and specially designed components thereof, as follows: The parameters of a.1. and a.2. are applicable with any of the following environmental conditions: a.2. refers to systems in which an INS and other independent navigation aids are built into a single unit (embedded) in order to achieve improved performance. Circular Error Probable (CEP) – In a circular normal distribution, the radius of the circle containing 50 percent of the individual measurements being made, or the radius of the circle within which there is a 50 percent probability of being located. 7A001 7A003 7A101 7A103 Grp_and_propulsion_ia9. note. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A9.001 Explosive bolts. I.A9.002 Internal combustion engines (i.e. axial piston or rotary piston type), designed or modified for propelling aircrafts or lighter-than-air-vehicles and specially designed components therefor. I.A9.003 Trucks, other than those specified in 9A115, having more than one motorised axle and a payload exceeding 5 tonnes. This item includes flatbed trailers, semi trailers and other trailers. 9A115 Grp. a. GOODS Grp. b. SOFTWARE No Description Related item from Annex I to Regulation (EC) No 428/2009 I.B.001 Software required for the development, production or use of the items in Part A. (Goods). Grp. c. TECHNOLOGY No Description Related item from Annex I to Regulation (EC) No 428/2009 I.C.001 Technology required for the development, production or use of the items in Part A. (Goods). Grp_and_technology_referred_to_in_articles_2_and_3_1234_general_notes_12_general_technology_note_gtn. 1234. Other items, materials, equipment, goods and technology which could contribute to North Korea's nuclear-related, other weapons of mass destruction-related or ballistic missile-related programmes Unless otherwise stated, reference numbers used in the column entitled Description refer to the descriptions of dual use items and technology set out in Annex I to Regulation (EC) No 428/2009. A reference number in the column entitled Related item from Annex I to Regulation (EC) No 428/2009 means that the characteristics of the item described in the column Description lie outside the parameters set out in the description of the dual use entry referred to. Definitions of terms between single quotation marks are given in a technical note to the relevant item. Definitions of terms between double quotation marks can be found in Annex I to Regulation (EC) No 428/2009. The object of the prohibitions contained in this Annex should not be defeated by the export of any non-prohibited goods (including plant) containing one or more prohibited components when the prohibited component or components are the principal element of the goods and can feasibly be removed or used for other purposes. N.B.: In judging whether the prohibited component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the prohibited component or components as the principal element of the goods being procured. Goods specified in this Annex include both new and used goods. The sale, supply, transfer or export of technology which is required for the development, production or use of goods the sale, supply, transfer or export of which is prohibited in Part A (Goods) below, is prohibited in accordance with the provisions of Part B. The technologyrequired for the development, production or use of prohibited goods remains under prohibition even when applicable to non-prohibited goods. Prohibitions do not apply to that technology which is the minimum necessary for the installation, operation, maintenance (checking) and repair of those goods which are not prohibited. Prohibitions on technology transfer do not apply to information in the public domain, to basic scientific research or to the minimum necessary information for patent applications.

ANNEX Ia Goods and technology referred to in articles 2 and 3 1.2.3.4. GENERAL NOTES 1.2. GENERAL TECHNOLOGY NOTE (GTN) 1.2.3.4. (To be read in conjunction with Part C.)

Other items, materials, equipment, goods and technology which could contribute to North Korea's nuclear-related, other weapons of mass destruction-related or ballistic missile-related programmes Unless otherwise stated, reference numbers used in the column entitled Description refer to the descriptions of dual use items and technology set out in Annex I to Regulation (EC) No 428/2009. A reference number in the column entitled Related item from Annex I to Regulation (EC) No 428/2009 means that the characteristics of the item described in the column Description lie outside the parameters set out in the description of the dual use entry referred to. Definitions of terms between single quotation marks are given in a technical note to the relevant item. Definitions of terms between double quotation marks can be found in Annex I to Regulation (EC) No 428/2009. The object of the prohibitions contained in this Annex should not be defeated by the export of any non-prohibited goods (including plant) containing one or more prohibited components when the prohibited component or components are the principal element of the goods and can feasibly be removed or used for other purposes. N.B.: In judging whether the prohibited component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the prohibited component or components as the principal element of the goods being procured. Goods specified in this Annex include both new and used goods. The sale, supply, transfer or export of technology which is required for the development, production or use of goods the sale, supply, transfer or export of which is prohibited in Part A (Goods) below, is prohibited in accordance with the provisions of Part B. The technologyrequired for the development, production or use of prohibited goods remains under prohibition even when applicable to non-prohibited goods. Prohibitions do not apply to that technology which is the minimum necessary for the installation, operation, maintenance (checking) and repair of those goods which are not prohibited. Prohibitions on technology transfer do not apply to information in the public domain, to basic scientific research or to the minimum necessary information for patent applications. (a) Iodine hollow cathode lamps with windows in pure silicon or quartz; (b) Uranium hollow cathode lamps. Pt_a_. 2. Seals; Pt_b_. 2. Internal components; (c) Sealing, testing and measurement equipment. Pt_a_. 3. Turbo-molecular pumps having a flow-rate equal to or greater than 400 l/s; Pt_b_. 3. Roots type vacuum roughing pumps having a volumetric aspiration flow-rate greater than 200 m3/h; Pt_c_. 2. Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps. Grp_materials_facilities_and_equipment. ia0. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A0.001 Hollow cathode lamps as follows: I.A0.002 Faraday isolators in the wavelength range 500 nm – 650 nm. I.A0.003 Optical gratings in the wavelength range 500 nm – 650 nm. I.A0.004 Optical fibres in the wavelength range 500 nm – 650 nm coated with anti-reflecting layers in the wavelength range 500 nm – 650 nm and having a core diameter greater than 0,4 mm but not exceeding 2 mm. I.A0.005 Nuclear reactor vessel components and testing equipment, other than those specified in 0A001, as follows: 0A001 I.A0.006 Nuclear detection systems, other than those specified in 0A001.j. or 1A004.c., for detection, identification or quantification of radioactive materials or radiation of nuclear origin and specially designed components thereof. N.B: For personal equipment refer to I.A1.004 below. 0A001.j. 1A004.c. I.A0.007 Bellows-sealed valves other than those specified in 0B001.c.6., 2A226 or 2B350, made of aluminium alloy or stainless steel type 304, 304L or 316L. 0B001.c.6. 2A226 2B350 I.A0.008 Laser mirrors, other than those specified in 6A005.e., consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica or sapphire). This item does not cover optical systems specially designed for astronomical applications, except if the mirrors contain fused silica. 0B001.g.5. 6A005.e. I.A0.009 Laser lenses, other than those specified in 6A005.e.2, consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica). 0B001.g. 6A005.e.2. I.A0.010 Pipes, piping, flanges, fittings made of, or lined with nickel, or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1. 2B350 I.A0.011 Vacuum pumps other than those specified in 0B002.f.2. or 2B231, as follows: 0B002.f.2. 2B231 I.A0.012 Shielded enclosures for the manipulation, storage and handling of radioactive substances (hot cells). 0B006 I.A0.013 Natural uranium or depleted uranium or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing, other than those specified in 0C001. 0C001 I.A0.014 Detonation chambers having a capacity of explosion absorption of more than 2,5 kg TNT equivalent. (a) Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching; (b) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (c) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine; (d) Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®); (e) Fluoro-elastomers (e.g. Viton ®, Tecnoflon ®); (f) Polytetrafluoroethylene (PTFE). Pt_a_. 2. Capable of an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); or Pt_b_. 2. Having a tensile strength of 415 MPa or more at 298 K (25 °C). (1a) specific modulus exceeding 10 × 106 m; or (2a) specific tensile strength exceeding 17 × 104 m; Pt_a_. 3. Aramid fibrous or filamentary materials having either of the following characteristics: (1a) specific modulus exceeding 3,18 × 106 m; or (2a) specific tensile strength exceeding 76,2 × 103 m; Pt_b_. 3. Glass fibrous or filamentary materials having either of the following characteristics: Pt_c_. 2. Thermoset resin-impregnated continuous yarns, rovings, tows or tapes with a width of 15 mm or less (once prepregs), made from glass fibrous or filamentary materials other than those specified in I.A1.010.a. below; Pt_d_. 2. Carbon fibrous or filamentary materials; Pt_e_. 2. Thermoset resin-impregnated continuous yarns, rovings, tows, or tapes, made from carbon fibrous or filamentary materials; Pt_f_. 2. Polyacrylonitrile (PAN) continuous yarns, rovings, tows or tapes; (g) Para-aramid fibrous or filamentary materials (Kevlar® and other Kevlar®-like fibres). Pt_a_. 4. Made from fibrous or filamentary materials specified in I.A1.009 above; Pt_b_. 4. Epoxy resin matrix impregnated carbon fibrous or filamentary materials (prepregs), specified in 1C010.a., 1C010.b. or 1C010.c., for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm; Pt_c_. 3. Prepregs specified in 1C010.a., 1C010.b. or 1C010.c., when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature. Pt_a_. 5. In forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and 300 mm; and Pt_b_. 5. A mass greater than 5 kg. Pt_a_. 6. Tungsten and tungsten alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm (micrometre) diameter or less with a tungsten content of 97 % by weight or more; Pt_b_. 6. Molybdenum and molybdenum alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm diameter or less with a molybdenum content of 97 % by weight or more; (1) Tungsten and alloys containing 97 % by weight or more of tungsten; (2) Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or (3) Silver infiltrated tungsten containing 80 % by weight or more of tungsten. Pt_c_. 4. Tungsten materials in the solid form, other than those specified in 1C226 having material compositions as follows: Pt_a_. 7. Iron content between 30 % and 60 %; and Pt_b_. 7. Cobalt content between 40 % and 60 %. Grp_materials_and_related_equipment. ia1. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A1.001 Bis(2-ethylhexyl) phosphoric acid (HDEHP or D2HPA) Chemical Abstract Number (CAS): [CAS 298-07-7] solvent in any quantity, with a purity greater than 90 %. I.A1.002 Fluorine gas CAS: [7782-41-4], with a purity of at least 95 %. I.A1.003 Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials: 1A001 I.A1.004 Personal equipment for detecting radiation of nuclear origin, other than that specified in 1A004.c., including personal dosimeters. 1A004.c. I.A1.005 Electrolytic cells for fluorine production, other than those specified in 1B225, with an output capacity greater than 100 g of fluorine per hour. 1B225 I.A1.006 Catalysts, other than those specified in 1A225 or 1B231, containing platinum, palladium or rhodium, usable for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water. 1A225 1B231 I.A1.007 Aluminium and its alloys, other than those specified in 1C002.b.4. or 1C202.a., in crude or semi-fabricated form having either of the following characteristics: The phrase alloys capable of encompasses alloys before or after heat treatment. 1C002.b.4. 1C202.a. I.A1.008 Magnetic metals, of all types and of whatever form, other than those specified in 1C003.a. having an initial relative permeability of 120000 or more and a thickness between 0,05 mm and 0,1 mm. Measurement of initial relative permeability must be performed on fully annealed materials. 1C003.a. I.A1.009 Fibrous or filamentary materials or prepregs, other than those specified in 1C010.a., 1C010.b., 1C210.a. or 1C210.b., as follows: 1C010.a. 1C010.b. 1C210.a. 1C210.b. I.A1.010 Resin-impregnated or pitch-impregnated fibres (prepregs), metal or carbon-coated fibres (preforms) or carbon fibre preforms, as follows: 1C010 1C210 I.A1.011 Reinforced silicon carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in missiles, other than those specified in 1C107. 1C107 I.A1.012 Not used. I.A1.013 Tantalum, tantalum carbide, tungsten, tungsten carbide and alloys thereof, other than those specified in 1C226, having both of the following characteristics: 1C226 I.A1.014 Elemental powders of cobalt, neodymium or samarium or alloys or mixtures thereof containing at least 20 % by weight of cobalt, neodymium or samarium, with a particle size less than 200 μm. Elemental powder means a high purity powder of one element. I.A1.015 Pure tributyl phosphate (TBP) [CAS No 126-73-8] or any mixture having a TBP content of more than 5 % by weight. I.A1.016 Maraging steel, other than those specified by 1C116 or 1C216. The phrase maraging steel capable of encompasses maraging steel before or after heat treatment. Maraging steels are iron alloys generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy. 1C116 1C216 I.A1.017 Metals, metal powders and material as follows: 1C117 1C226 I.A1.018 Soft magnetic alloys, other than those specified in 1C003, having a chemical composition as follows: 1C003 I.A1.019 Not used. I.A1.020 Graphite, other than that specified in 0C004 or 1C107.a., designed or specified for use in Electrical Discharge Machining (EDM) machines. 0C004 1C107.a. (a) Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured bare table; Pt_technical. note. Digital controllers, combined with specially designed vibration test software, with a real-time control bandwidth greater than 5 kHz designed for use with vibration test systems specified in a.; Real-time control bandwidth is defined as the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals. (c) Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured bare table, and usable in vibration test systems specified in a.; (d) Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured bare table, and usable in vibration systems specified in a. (1) Not capable of balancing rotors/assemblies having a mass greater than 3 kg; (2) Capable of balancing rotors/assemblies at speeds greater than 12500 rpm; (3) Capable of correcting unbalance in two planes or more; and (4) Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass; Pt_a_. 2. Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics: (b) Indicator heads designed or modified for use with machines specified in a. above. Pt_a_. 3. A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); or Pt_b_. 2. A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation). Pt_a_. 4. Pressure sensing elements made of or protected by Materials resistant to corrosion by uranium hexafluoride (UF6); and (1) A full scale of less than 200 kPa and an accuracy of better than ± 1 % of full scale; or (2) A full scale of 200 kPa or greater and an accuracy of better than 2 kPa. Pt_b_. 3. Having either of the following characteristics: Pt_a_. 5. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 4. Fluoropolymers; Pt_c_. 2. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 2. Graphite or carbon graphite; (e) Nickel or alloys with more than 40 % nickel by weight; (f) Tantalum or tantalum alloys; (g) Titanium or titanium alloys; (h) Zirconium or zirconium alloys; or (i) Stainless steel. Pt_a_. 6. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 5. Fluoropolymers; Pt_c_. 3. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 3. Graphite or carbon graphite; Pt_e_. 2. Nickel or alloys with more than 40 % nickel by weight; Pt_f_. 2. Tantalum or tantalum alloys; Pt_g_. 2. Titanium or titanium alloys; Pt_h_. 2. Zirconium or zirconium alloys; Pt_i_. 2. Silicon carbide; (j) Titanium carbide; or (k) Stainless steel. Pt_a_. 7. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 6. Ceramics; Pt_c_. 4. Ferrosilicon; Pt_d_. 4. Fluoropolymers; Pt_e_. 3. Glass (including vitrified or enamelled coatings or glass lining); Pt_f_. 3. Graphite or carbon graphite; Pt_g_. 3. Nickel or alloys with more than 40 % nickel by weight; Pt_h_. 3. Tantalum or tantalum alloys; Pt_i_. 3. Titanium or titanium alloys; Pt_j_. 2. Zirconium or zirconium alloys; Pt_k_. 2. Niobium (columbium) or niobium alloys; (l) Stainless steel; (m) Aluminium alloys; or (n) Rubber. Pt_a_. 8. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 7. Fluoropolymers; Pt_c_. 5. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 5. Nickel or alloys with more than 40 % nickel by weight; Pt_e_. 4. Tantalum or tantalum alloys; Pt_f_. 4. Titanium or titanium alloys; or Pt_g_. 4. Zirconium or zirconium alloys. Pt_a_. 9. Fermenters capable of cultivation of pathogenic micro-organisms or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more; Pt_technical_note_. 2. Agitators for fermenters as mentioned in a.above; Fermenters include bioreactors, chemostats and continuous-flow systems. (1) Polymerase chain reaction (PCR)-equipment (2) Genetic sequencing equipment; (3) Genetic synthesizers; (4) Electroporation equipment; (5) Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above; Pt_c_. 6. Laboratory equipment as follows: Pt_d_. 6. Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects; Pt_e_. 5. Ultracentrifuges, rotors and adaptors for ultracentrifuges; Pt_f_. 5. Freeze drying equipment. Pt_a_. 10. Chemical vapour deposition (CVD) production equipment; Pt_b_. 8. Physical vapour deposition (PVD) production equipment; Pt_c_. 7. Production equipment for deposition by means of inductive or resistance heating. Pt_a_. 11. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 9. Fluoropolymers; Pt_c_. 8. Glass (including vitrified or enamelled coatings or glass lining); Pt_d_. 7. Nickel or alloys with more than 40 % nickel by weight; Pt_e_. 6. Tantalum or tantalum alloys; Pt_f_. 6. Titanium or titanium alloys; Pt_g_. 5. Zirconium or zirconium alloys; Pt_h_. 4. Niobium (columbium) or niobium alloys; Pt_i_. 4. Stainless steel; Pt_j_. 3. Wood; or Pt_k_. 3. Rubber. Grp_processing. ia2. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A2.001 Vibration test systems, equipment and components thereof, other than those specified in 2B116: bare table means a flat table, or surface, with no fixture or fittings. 2B116 I.A2.002 Machine tools, other than those specified in 2B001.c. or 2B201.b., for grinding having positioning accuracies with all compensations available equal to or less (better) than 15 μm according to ISO 230/2 (1988) or national equivalents along any linear axis. 2B001.c. 2B201.b. I.A2.002a Components and numerical controls, specially designed for machine tools specified in 2B001, 2B201 or I.A2.002 above. I.A2.003 Balancing machines and related equipment as follows: Indicator heads are sometimes known as balancing instrumentation. 2B119 I.A2.004 Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, other than those specified in 2B225, having either of the following characteristics: Remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of master/slave type or operated by joystick or keypad. 2B225 I.A2.005 Controlled atmosphere heat treatment furnaces or oxidation furnaces capable of operation at temperatures above 400 °C. This item does not cover tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics. 2B226 2B227 I.A2.006 Not used. I.A2.007 Pressure transducers, other than those defined in 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics: For the purposes of 2B230 accuracy includes non-linearity, hysteresis and repeatability at ambient temperature. 2B230 I.A2.008 Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, plate columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: Carbon graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight. 2B350.e. I.A2.009 Industrial equipment and components, other than those specified in 2B350.d., as follows: Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials: This item does not cover vehicle radiators. The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger. 2B350.d. I.A2.010 Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, or vacuum pumps and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: The materials used for gaskets and seals and other implementations of sealing functions do not determine the status of control of the pump. The term rubber encompasses all kinds of natural and synthetic rubbers. 2B350.i. I.A2.011 Centrifugal separators, other than those specified in 2B352.c., capable of continuous separation without the propagation of aerosols and manufactured from: Centrifugal separators include decanters. 2B352.c. I.A2.012 Sintered metal filters, other than those specified in 2B352.d., made of nickel or nickel alloy with more than 40 % nickel by weight. 2B352.d. I.A2.013 Spin-forming machines and flow-forming machines, other than those specified by 2B009, 2B109 or 2B209 and specially designed components therefor. For the purpose of this item, machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines. 2B009 2B109 2B209 I.A2.014 Equipment and reagents, other than those specified in 2B350 or 2B352, as follows: 2B350 2B352 I.A2.015 Equipment, other than that specified in 2B005, 2B105 or 3B001.d., for the deposition of metallic overlays as follows, and specially designed components and accessories therefor: 2B005 2B105 3B001.d. I.A2.016 Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0.5 m3 (500 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials: The term rubber encompasses all kinds of natural and synthetic rubbers. 2B350 (a) Capable of continuously producing, over a time period of eight hours, 10 kV or more, with output power of 5 kW or more with or without sweeping; and (b) Current or voltage stability better than 0,1 % over a time period of four hours. Pt_a_. 2. Inductively coupled plasma mass spectrometers (ICP/MS); Pt_b_. 2. Glow discharge mass spectrometers (GDMS); (c) Thermal ionisation mass spectrometers (TIMS); (d) Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to corrosion by uranium hexafluoride UF6; (1) A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or (2) A source chamber constructed from, lined with or plated with materials resistant to UF6; (e) Molecular beam mass spectrometers having either of the following characteristics: (f) Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides. Pt_a_. 3. Multiphase output capable of providing a power of 40 W or greater; Pt_b_. 3. Capable of operating in the frequency range between 600 and 2000 Hz; and Pt_c_. 2. Frequency control better (less) than 0,1 %. Grp. ia3. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A3.001 High voltage direct current power supplies, other than those specified in 0B001.j.5. or 3A227, having both of the following characteristics: 0B001.j.5. 3A227 I.A3.002 Mass spectrometers, other than those specified in 0B002.g. or 3A233, capable of measuring ions of 200 atomic mass units or more and having a resolution of better than 2 parts in 200, as follows, and ion sources therefor: 0B002.g. 3A233 I.A3.003 Frequency changers or generators, other than those specified by 0B001.b.13. or 3A225, having all of the following characteristics, and specially designed components and software therefor: Frequency changers are also known as converters, inverters, generators, electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives. The functionality specified in this item may be met by certain equipment marketed as: electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives. 0B001.b.13. 3A225 I.A3.004 Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material. (a) Individual semiconductor lasers with an output power greater than 200 mW each, in quantities larger than 100; (b) Semiconductor laser arrays having an output power greater than 20 W. Pt_a_. 2. Titanium-sapphire lasers, Pt_b_. 2. Alexandrite lasers. Pt_a_. 3. Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz; Pt_b_. 3. Recurrence frequency supplies; (c) Pockels cells. Pt_a_. 4. Operating at wavelengths between 300 nm and 800 nm; Pt_b_. 4. An average output power greater than 10 W but not exceeding 30 W; Pt_c_. 2. A repetition rate greater than 1 kHz; and (d) Pulse width less than 100 ns. Pt_a_. 5. Operating at wavelengths between 9 μm and 11 μm; Pt_b_. 5. A repetition rate greater than 250 Hz; Pt_c_. 3. An average output power greater than 100 W but not exceeding 500 W; and Pt_d_. 2. Pulse width less than 200 ns. Grp_and_lasers. ia6. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A6.001 Yttrium aluminium garnet (YAG) rods. I.A6.002 Optical equipment and components, other than those specified in 6A002 or 6A004.b. as follows: Infrared optics in the wavelength range 9 μm– 17 μm and components thereof, including cadmium telluride (CdTe) components. 6A002 6A004.b. I.A6.003 Wave front corrector systems, other than mirrors specified in 6A004.a., 6A005.e. or 6A005.f., for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and deformable mirrors including bimorph mirrors. 6A004.a. 6A005.e. 6A005.f. I.A6.004 Argon ion lasers, other than those specified in 0B001.g.5., 6A005.a.6. and/or 6A205.a., having an average output power equal to or greater than 5 W. 0B001.g.5. 6A005.a.6. 6A205.a. I.A6.005 Semiconductor lasers, other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.b., and components thereof, as follows: Semiconductor lasers are commonly called laser diodes. This item does not cover laser diodes with a wavelength in the range 1,2 μm – 2,0 μm. 0B001.g.5. 0B001.h.6. 6A005.b. I.A6.006 Tunable semiconductor lasers and tunable semiconductor laser arrays, other than those specified in 0B001.h.6. or 6A005.b., of a wavelength between 9 μm and 17 μm, as well as array stacks of semiconductor lasers containing at least one tunable semiconductor laser array of such wavelength. Semiconductor lasers are commonly called laser diodes. 0B001.h.6. 6A005.b. I.A6.007 Solid state tunablelasers, other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.c.1., and specially designed components thereof, as follows: 0B001.g.5. 0B001.h.6. 6A005.c.1. I.A6.008 Neodymium-doped (other than glass) lasers, other than those specified in 6A005.c.2.b., having an output wavelength greater than 1,0 μm but not exceeding 1,1 μm and output energy exceeding 10 J per pulse. 6A005.c.2.b. I.A6.009 Components of acousto-optics, as follows: 6A203.b.4. I.A6.010 Radiation-hardened cameras, or lenses thereof, other than those specified in 6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 103 Gy (silicon) (5 × 106 rad (silicon)) without operational degradation. The term Gy (silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation. 6A203.c. I.A6.011 Tunable pulsed dye laser amplifiers and oscillators, other than those specified in 0B001.g.5., 6A005 and or 6A205.c., having all of the following characteristics: This item does not cover single mode oscillators. 0B001.g.5. 6A005 6A205.c. I.A6.012 Pulsed carbon dioxide lasers, other than those specified in, 0B001.h.6., 6A005.d. or 6A205.d., having all of the following characteristics: 0B001.h.6. 6A005.d. 6A205.d. (a) Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or (b) Specified to function at linear acceleration levels exceeding 10 g; (1) Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for aircraft, land vehicle, vessels (surface or underwater) or spacecraft for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof: (2) Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with Data-Based Referenced Navigation (DBRN) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or DBRN for a period of up to four minutes, of less (better) than 10 metres Circular Error Probable (CEP); (a) Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or (b) Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec. (3) Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof: (a) Inertial navigation systems which are certified for use on civil aircraft by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows: (b) Theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof. (c) Inertial or other equipment using accelerometers specified in 7A001 or 7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations.v (a) A constant power spectral density (PSD) value of 0,04 g2/Hz over a frequency interval of 15 to 1000 Hz; and (b) The PSD attenuates with a frequency from 0,04 g2/Hz to 0,01 g2/Hz over a frequency interval from 1000 to 2000 Hz; (1) Input random vibration with an overall magnitude of 7,7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following: (2) A roll and yaw rate equal to or greater than + 2,62 radian/s (150 deg/s); or (3) According to national standards equivalent to 1. or 2. above. Grp_and_avionics. ia7. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A7.001 Inertial navigation systems and specially designed components thereof, as follows: The parameters of a.1. and a.2. are applicable with any of the following environmental conditions: a.2. refers to systems in which an INS and other independent navigation aids are built into a single unit (embedded) in order to achieve improved performance. Circular Error Probable (CEP) – In a circular normal distribution, the radius of the circle containing 50 percent of the individual measurements being made, or the radius of the circle within which there is a 50 percent probability of being located. 7A001 7A003 7A101 7A103 Grp_and_propulsion_ia9. note. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A9.001 Explosive bolts. I.A9.002 Internal combustion engines (i.e. axial piston or rotary piston type), designed or modified for propelling aircrafts or lighter-than-air-vehicles and specially designed components therefor. I.A9.003 Trucks, other than those specified in 9A115, having more than one motorised axle and a payload exceeding 5 tonnes. This item includes flatbed trailers, semi trailers and other trailers. 9A115 Grp. a. GOODS Grp. b. SOFTWARE No Description Related item from Annex I to Regulation (EC) No 428/2009 I.B.001 Software required for the development, production or use of the items in Part A. (Goods). Grp. c. TECHNOLOGY No Description Related item from Annex I to Regulation (EC) No 428/2009 I.C.001 Technology required for the development, production or use of the items in Part A. (Goods).

A.

GOODS (a) Iodine hollow cathode lamps with windows in pure silicon or quartz; (b) Uranium hollow cathode lamps. Pt_a_. 2. Seals; Pt_b_. 2. Internal components; (c) Sealing, testing and measurement equipment. Pt_a_. 3. Turbo-molecular pumps having a flow-rate equal to or greater than 400 l/s; Pt_b_. 3. Roots type vacuum roughing pumps having a volumetric aspiration flow-rate greater than 200 m3/h; Pt_c_. 2. Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps. Grp_materials_facilities_and_equipment. ia0. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A0.001 Hollow cathode lamps as follows: I.A0.002 Faraday isolators in the wavelength range 500 nm – 650 nm. I.A0.003 Optical gratings in the wavelength range 500 nm – 650 nm. I.A0.004 Optical fibres in the wavelength range 500 nm – 650 nm coated with anti-reflecting layers in the wavelength range 500 nm – 650 nm and having a core diameter greater than 0,4 mm but not exceeding 2 mm. I.A0.005 Nuclear reactor vessel components and testing equipment, other than those specified in 0A001, as follows: 0A001 I.A0.006 Nuclear detection systems, other than those specified in 0A001.j. or 1A004.c., for detection, identification or quantification of radioactive materials or radiation of nuclear origin and specially designed components thereof. N.B: For personal equipment refer to I.A1.004 below. 0A001.j. 1A004.c. I.A0.007 Bellows-sealed valves other than those specified in 0B001.c.6., 2A226 or 2B350, made of aluminium alloy or stainless steel type 304, 304L or 316L. 0B001.c.6. 2A226 2B350 I.A0.008 Laser mirrors, other than those specified in 6A005.e., consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica or sapphire). This item does not cover optical systems specially designed for astronomical applications, except if the mirrors contain fused silica. 0B001.g.5. 6A005.e. I.A0.009 Laser lenses, other than those specified in 6A005.e.2, consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica). 0B001.g. 6A005.e.2. I.A0.010 Pipes, piping, flanges, fittings made of, or lined with nickel, or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1. 2B350 I.A0.011 Vacuum pumps other than those specified in 0B002.f.2. or 2B231, as follows: 0B002.f.2. 2B231 I.A0.012 Shielded enclosures for the manipulation, storage and handling of radioactive substances (hot cells). 0B006 I.A0.013 Natural uranium or depleted uranium or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing, other than those specified in 0C001. 0C001 I.A0.014 Detonation chambers having a capacity of explosion absorption of more than 2,5 kg TNT equivalent. (a) Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching; (b) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (c) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine; (d) Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®); (e) Fluoro-elastomers (e.g. Viton ®, Tecnoflon ®); (f) Polytetrafluoroethylene (PTFE). Pt_a_. 2. Capable of an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); or Pt_b_. 2. Having a tensile strength of 415 MPa or more at 298 K (25 °C). (1a) specific modulus exceeding 10 × 106 m; or (2a) specific tensile strength exceeding 17 × 104 m; Pt_a_. 3. Aramid fibrous or filamentary materials having either of the following characteristics: (1a) specific modulus exceeding 3,18 × 106 m; or (2a) specific tensile strength exceeding 76,2 × 103 m; Pt_b_. 3. Glass fibrous or filamentary materials having either of the following characteristics: Pt_c_. 2. Thermoset resin-impregnated continuous yarns, rovings, tows or tapes with a width of 15 mm or less (once prepregs), made from glass fibrous or filamentary materials other than those specified in I.A1.010.a. below; Pt_d_. 2. Carbon fibrous or filamentary materials; Pt_e_. 2. Thermoset resin-impregnated continuous yarns, rovings, tows, or tapes, made from carbon fibrous or filamentary materials; Pt_f_. 2. Polyacrylonitrile (PAN) continuous yarns, rovings, tows or tapes; (g) Para-aramid fibrous or filamentary materials (Kevlar® and other Kevlar®-like fibres). Pt_a_. 4. Made from fibrous or filamentary materials specified in I.A1.009 above; Pt_b_. 4. Epoxy resin matrix impregnated carbon fibrous or filamentary materials (prepregs), specified in 1C010.a., 1C010.b. or 1C010.c., for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm; Pt_c_. 3. Prepregs specified in 1C010.a., 1C010.b. or 1C010.c., when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature. Pt_a_. 5. In forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and 300 mm; and Pt_b_. 5. A mass greater than 5 kg. Pt_a_. 6. Tungsten and tungsten alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm (micrometre) diameter or less with a tungsten content of 97 % by weight or more; Pt_b_. 6. Molybdenum and molybdenum alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm diameter or less with a molybdenum content of 97 % by weight or more; (1) Tungsten and alloys containing 97 % by weight or more of tungsten; (2) Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or (3) Silver infiltrated tungsten containing 80 % by weight or more of tungsten. Pt_c_. 4. Tungsten materials in the solid form, other than those specified in 1C226 having material compositions as follows: Pt_a_. 7. Iron content between 30 % and 60 %; and Pt_b_. 7. Cobalt content between 40 % and 60 %. Grp_materials_and_related_equipment. ia1. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A1.001 Bis(2-ethylhexyl) phosphoric acid (HDEHP or D2HPA) Chemical Abstract Number (CAS): [CAS 298-07-7] solvent in any quantity, with a purity greater than 90 %. I.A1.002 Fluorine gas CAS: [7782-41-4], with a purity of at least 95 %. I.A1.003 Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials: 1A001 I.A1.004 Personal equipment for detecting radiation of nuclear origin, other than that specified in 1A004.c., including personal dosimeters. 1A004.c. I.A1.005 Electrolytic cells for fluorine production, other than those specified in 1B225, with an output capacity greater than 100 g of fluorine per hour. 1B225 I.A1.006 Catalysts, other than those specified in 1A225 or 1B231, containing platinum, palladium or rhodium, usable for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water. 1A225 1B231 I.A1.007 Aluminium and its alloys, other than those specified in 1C002.b.4. or 1C202.a., in crude or semi-fabricated form having either of the following characteristics: The phrase alloys capable of encompasses alloys before or after heat treatment. 1C002.b.4. 1C202.a. I.A1.008 Magnetic metals, of all types and of whatever form, other than those specified in 1C003.a. having an initial relative permeability of 120000 or more and a thickness between 0,05 mm and 0,1 mm. Measurement of initial relative permeability must be performed on fully annealed materials. 1C003.a. I.A1.009 Fibrous or filamentary materials or prepregs, other than those specified in 1C010.a., 1C010.b., 1C210.a. or 1C210.b., as follows: 1C010.a. 1C010.b. 1C210.a. 1C210.b. I.A1.010 Resin-impregnated or pitch-impregnated fibres (prepregs), metal or carbon-coated fibres (preforms) or carbon fibre preforms, as follows: 1C010 1C210 I.A1.011 Reinforced silicon carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in missiles, other than those specified in 1C107. 1C107 I.A1.012 Not used. I.A1.013 Tantalum, tantalum carbide, tungsten, tungsten carbide and alloys thereof, other than those specified in 1C226, having both of the following characteristics: 1C226 I.A1.014 Elemental powders of cobalt, neodymium or samarium or alloys or mixtures thereof containing at least 20 % by weight of cobalt, neodymium or samarium, with a particle size less than 200 μm. Elemental powder means a high purity powder of one element. I.A1.015 Pure tributyl phosphate (TBP) [CAS No 126-73-8] or any mixture having a TBP content of more than 5 % by weight. I.A1.016 Maraging steel, other than those specified by 1C116 or 1C216. The phrase maraging steel capable of encompasses maraging steel before or after heat treatment. Maraging steels are iron alloys generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy. 1C116 1C216 I.A1.017 Metals, metal powders and material as follows: 1C117 1C226 I.A1.018 Soft magnetic alloys, other than those specified in 1C003, having a chemical composition as follows: 1C003 I.A1.019 Not used. I.A1.020 Graphite, other than that specified in 0C004 or 1C107.a., designed or specified for use in Electrical Discharge Machining (EDM) machines. 0C004 1C107.a. (a) Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured bare table; Pt_technical. note. Digital controllers, combined with specially designed vibration test software, with a real-time control bandwidth greater than 5 kHz designed for use with vibration test systems specified in a.; Real-time control bandwidth is defined as the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals. (c) Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured bare table, and usable in vibration test systems specified in a.; (d) Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured bare table, and usable in vibration systems specified in a. (1) Not capable of balancing rotors/assemblies having a mass greater than 3 kg; (2) Capable of balancing rotors/assemblies at speeds greater than 12500 rpm; (3) Capable of correcting unbalance in two planes or more; and (4) Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass; Pt_a_. 2. Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics: (b) Indicator heads designed or modified for use with machines specified in a. above. Pt_a_. 3. A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); or Pt_b_. 2. A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation). Pt_a_. 4. Pressure sensing elements made of or protected by Materials resistant to corrosion by uranium hexafluoride (UF6); and (1) A full scale of less than 200 kPa and an accuracy of better than ± 1 % of full scale; or (2) A full scale of 200 kPa or greater and an accuracy of better than 2 kPa. Pt_b_. 3. Having either of the following characteristics: Pt_a_. 5. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 4. Fluoropolymers; Pt_c_. 2. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 2. Graphite or carbon graphite; (e) Nickel or alloys with more than 40 % nickel by weight; (f) Tantalum or tantalum alloys; (g) Titanium or titanium alloys; (h) Zirconium or zirconium alloys; or (i) Stainless steel. Pt_a_. 6. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 5. Fluoropolymers; Pt_c_. 3. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 3. Graphite or carbon graphite; Pt_e_. 2. Nickel or alloys with more than 40 % nickel by weight; Pt_f_. 2. Tantalum or tantalum alloys; Pt_g_. 2. Titanium or titanium alloys; Pt_h_. 2. Zirconium or zirconium alloys; Pt_i_. 2. Silicon carbide; (j) Titanium carbide; or (k) Stainless steel. Pt_a_. 7. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 6. Ceramics; Pt_c_. 4. Ferrosilicon; Pt_d_. 4. Fluoropolymers; Pt_e_. 3. Glass (including vitrified or enamelled coatings or glass lining); Pt_f_. 3. Graphite or carbon graphite; Pt_g_. 3. Nickel or alloys with more than 40 % nickel by weight; Pt_h_. 3. Tantalum or tantalum alloys; Pt_i_. 3. Titanium or titanium alloys; Pt_j_. 2. Zirconium or zirconium alloys; Pt_k_. 2. Niobium (columbium) or niobium alloys; (l) Stainless steel; (m) Aluminium alloys; or (n) Rubber. Pt_a_. 8. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 7. Fluoropolymers; Pt_c_. 5. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 5. Nickel or alloys with more than 40 % nickel by weight; Pt_e_. 4. Tantalum or tantalum alloys; Pt_f_. 4. Titanium or titanium alloys; or Pt_g_. 4. Zirconium or zirconium alloys. Pt_a_. 9. Fermenters capable of cultivation of pathogenic micro-organisms or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more; Pt_technical_note_. 2. Agitators for fermenters as mentioned in a.above; Fermenters include bioreactors, chemostats and continuous-flow systems. (1) Polymerase chain reaction (PCR)-equipment (2) Genetic sequencing equipment; (3) Genetic synthesizers; (4) Electroporation equipment; (5) Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above; Pt_c_. 6. Laboratory equipment as follows: Pt_d_. 6. Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects; Pt_e_. 5. Ultracentrifuges, rotors and adaptors for ultracentrifuges; Pt_f_. 5. Freeze drying equipment. Pt_a_. 10. Chemical vapour deposition (CVD) production equipment; Pt_b_. 8. Physical vapour deposition (PVD) production equipment; Pt_c_. 7. Production equipment for deposition by means of inductive or resistance heating. Pt_a_. 11. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 9. Fluoropolymers; Pt_c_. 8. Glass (including vitrified or enamelled coatings or glass lining); Pt_d_. 7. Nickel or alloys with more than 40 % nickel by weight; Pt_e_. 6. Tantalum or tantalum alloys; Pt_f_. 6. Titanium or titanium alloys; Pt_g_. 5. Zirconium or zirconium alloys; Pt_h_. 4. Niobium (columbium) or niobium alloys; Pt_i_. 4. Stainless steel; Pt_j_. 3. Wood; or Pt_k_. 3. Rubber. Grp_processing. ia2. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A2.001 Vibration test systems, equipment and components thereof, other than those specified in 2B116: bare table means a flat table, or surface, with no fixture or fittings. 2B116 I.A2.002 Machine tools, other than those specified in 2B001.c. or 2B201.b., for grinding having positioning accuracies with all compensations available equal to or less (better) than 15 μm according to ISO 230/2 (1988) or national equivalents along any linear axis. 2B001.c. 2B201.b. I.A2.002a Components and numerical controls, specially designed for machine tools specified in 2B001, 2B201 or I.A2.002 above. I.A2.003 Balancing machines and related equipment as follows: Indicator heads are sometimes known as balancing instrumentation. 2B119 I.A2.004 Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, other than those specified in 2B225, having either of the following characteristics: Remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of master/slave type or operated by joystick or keypad. 2B225 I.A2.005 Controlled atmosphere heat treatment furnaces or oxidation furnaces capable of operation at temperatures above 400 °C. This item does not cover tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics. 2B226 2B227 I.A2.006 Not used. I.A2.007 Pressure transducers, other than those defined in 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics: For the purposes of 2B230 accuracy includes non-linearity, hysteresis and repeatability at ambient temperature. 2B230 I.A2.008 Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, plate columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: Carbon graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight. 2B350.e. I.A2.009 Industrial equipment and components, other than those specified in 2B350.d., as follows: Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials: This item does not cover vehicle radiators. The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger. 2B350.d. I.A2.010 Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, or vacuum pumps and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: The materials used for gaskets and seals and other implementations of sealing functions do not determine the status of control of the pump. The term rubber encompasses all kinds of natural and synthetic rubbers. 2B350.i. I.A2.011 Centrifugal separators, other than those specified in 2B352.c., capable of continuous separation without the propagation of aerosols and manufactured from: Centrifugal separators include decanters. 2B352.c. I.A2.012 Sintered metal filters, other than those specified in 2B352.d., made of nickel or nickel alloy with more than 40 % nickel by weight. 2B352.d. I.A2.013 Spin-forming machines and flow-forming machines, other than those specified by 2B009, 2B109 or 2B209 and specially designed components therefor. For the purpose of this item, machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines. 2B009 2B109 2B209 I.A2.014 Equipment and reagents, other than those specified in 2B350 or 2B352, as follows: 2B350 2B352 I.A2.015 Equipment, other than that specified in 2B005, 2B105 or 3B001.d., for the deposition of metallic overlays as follows, and specially designed components and accessories therefor: 2B005 2B105 3B001.d. I.A2.016 Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0.5 m3 (500 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials: The term rubber encompasses all kinds of natural and synthetic rubbers. 2B350 (a) Capable of continuously producing, over a time period of eight hours, 10 kV or more, with output power of 5 kW or more with or without sweeping; and (b) Current or voltage stability better than 0,1 % over a time period of four hours. Pt_a_. 2. Inductively coupled plasma mass spectrometers (ICP/MS); Pt_b_. 2. Glow discharge mass spectrometers (GDMS); (c) Thermal ionisation mass spectrometers (TIMS); (d) Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to corrosion by uranium hexafluoride UF6; (1) A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or (2) A source chamber constructed from, lined with or plated with materials resistant to UF6; (e) Molecular beam mass spectrometers having either of the following characteristics: (f) Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides. Pt_a_. 3. Multiphase output capable of providing a power of 40 W or greater; Pt_b_. 3. Capable of operating in the frequency range between 600 and 2000 Hz; and Pt_c_. 2. Frequency control better (less) than 0,1 %. Grp. ia3. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A3.001 High voltage direct current power supplies, other than those specified in 0B001.j.5. or 3A227, having both of the following characteristics: 0B001.j.5. 3A227 I.A3.002 Mass spectrometers, other than those specified in 0B002.g. or 3A233, capable of measuring ions of 200 atomic mass units or more and having a resolution of better than 2 parts in 200, as follows, and ion sources therefor: 0B002.g. 3A233 I.A3.003 Frequency changers or generators, other than those specified by 0B001.b.13. or 3A225, having all of the following characteristics, and specially designed components and software therefor: Frequency changers are also known as converters, inverters, generators, electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives. The functionality specified in this item may be met by certain equipment marketed as: electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives. 0B001.b.13. 3A225 I.A3.004 Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material. (a) Individual semiconductor lasers with an output power greater than 200 mW each, in quantities larger than 100; (b) Semiconductor laser arrays having an output power greater than 20 W. Pt_a_. 2. Titanium-sapphire lasers, Pt_b_. 2. Alexandrite lasers. Pt_a_. 3. Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz; Pt_b_. 3. Recurrence frequency supplies; (c) Pockels cells. Pt_a_. 4. Operating at wavelengths between 300 nm and 800 nm; Pt_b_. 4. An average output power greater than 10 W but not exceeding 30 W; Pt_c_. 2. A repetition rate greater than 1 kHz; and (d) Pulse width less than 100 ns. Pt_a_. 5. Operating at wavelengths between 9 μm and 11 μm; Pt_b_. 5. A repetition rate greater than 250 Hz; Pt_c_. 3. An average output power greater than 100 W but not exceeding 500 W; and Pt_d_. 2. Pulse width less than 200 ns. Grp_and_lasers. ia6. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A6.001 Yttrium aluminium garnet (YAG) rods. I.A6.002 Optical equipment and components, other than those specified in 6A002 or 6A004.b. as follows: Infrared optics in the wavelength range 9 μm– 17 μm and components thereof, including cadmium telluride (CdTe) components. 6A002 6A004.b. I.A6.003 Wave front corrector systems, other than mirrors specified in 6A004.a., 6A005.e. or 6A005.f., for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and deformable mirrors including bimorph mirrors. 6A004.a. 6A005.e. 6A005.f. I.A6.004 Argon ion lasers, other than those specified in 0B001.g.5., 6A005.a.6. and/or 6A205.a., having an average output power equal to or greater than 5 W. 0B001.g.5. 6A005.a.6. 6A205.a. I.A6.005 Semiconductor lasers, other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.b., and components thereof, as follows: Semiconductor lasers are commonly called laser diodes. This item does not cover laser diodes with a wavelength in the range 1,2 μm – 2,0 μm. 0B001.g.5. 0B001.h.6. 6A005.b. I.A6.006 Tunable semiconductor lasers and tunable semiconductor laser arrays, other than those specified in 0B001.h.6. or 6A005.b., of a wavelength between 9 μm and 17 μm, as well as array stacks of semiconductor lasers containing at least one tunable semiconductor laser array of such wavelength. Semiconductor lasers are commonly called laser diodes. 0B001.h.6. 6A005.b. I.A6.007 Solid state tunablelasers, other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.c.1., and specially designed components thereof, as follows: 0B001.g.5. 0B001.h.6. 6A005.c.1. I.A6.008 Neodymium-doped (other than glass) lasers, other than those specified in 6A005.c.2.b., having an output wavelength greater than 1,0 μm but not exceeding 1,1 μm and output energy exceeding 10 J per pulse. 6A005.c.2.b. I.A6.009 Components of acousto-optics, as follows: 6A203.b.4. I.A6.010 Radiation-hardened cameras, or lenses thereof, other than those specified in 6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 103 Gy (silicon) (5 × 106 rad (silicon)) without operational degradation. The term Gy (silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation. 6A203.c. I.A6.011 Tunable pulsed dye laser amplifiers and oscillators, other than those specified in 0B001.g.5., 6A005 and or 6A205.c., having all of the following characteristics: This item does not cover single mode oscillators. 0B001.g.5. 6A005 6A205.c. I.A6.012 Pulsed carbon dioxide lasers, other than those specified in, 0B001.h.6., 6A005.d. or 6A205.d., having all of the following characteristics: 0B001.h.6. 6A005.d. 6A205.d. (a) Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or (b) Specified to function at linear acceleration levels exceeding 10 g; (1) Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for aircraft, land vehicle, vessels (surface or underwater) or spacecraft for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof: (2) Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with Data-Based Referenced Navigation (DBRN) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or DBRN for a period of up to four minutes, of less (better) than 10 metres Circular Error Probable (CEP); (a) Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or (b) Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec. (3) Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof: (a) Inertial navigation systems which are certified for use on civil aircraft by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows: (b) Theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof. (c) Inertial or other equipment using accelerometers specified in 7A001 or 7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations.v (a) A constant power spectral density (PSD) value of 0,04 g2/Hz over a frequency interval of 15 to 1000 Hz; and (b) The PSD attenuates with a frequency from 0,04 g2/Hz to 0,01 g2/Hz over a frequency interval from 1000 to 2000 Hz; (1) Input random vibration with an overall magnitude of 7,7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following: (2) A roll and yaw rate equal to or greater than + 2,62 radian/s (150 deg/s); or (3) According to national standards equivalent to 1. or 2. above. Grp_and_avionics. ia7. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A7.001 Inertial navigation systems and specially designed components thereof, as follows: The parameters of a.1. and a.2. are applicable with any of the following environmental conditions: a.2. refers to systems in which an INS and other independent navigation aids are built into a single unit (embedded) in order to achieve improved performance. Circular Error Probable (CEP) – In a circular normal distribution, the radius of the circle containing 50 percent of the individual measurements being made, or the radius of the circle within which there is a 50 percent probability of being located. 7A001 7A003 7A101 7A103 Grp_and_propulsion_ia9. note. Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A9.001 Explosive bolts. I.A9.002 Internal combustion engines (i.e. axial piston or rotary piston type), designed or modified for propelling aircrafts or lighter-than-air-vehicles and specially designed components therefor. I.A9.003 Trucks, other than those specified in 9A115, having more than one motorised axle and a payload exceeding 5 tonnes. This item includes flatbed trailers, semi trailers and other trailers. 9A115

NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT I.A0. Note:

Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A0.001 Hollow cathode lamps as follows: I.A0.002 Faraday isolators in the wavelength range 500 nm – 650 nm. I.A0.003 Optical gratings in the wavelength range 500 nm – 650 nm. I.A0.004 Optical fibres in the wavelength range 500 nm – 650 nm coated with anti-reflecting layers in the wavelength range 500 nm – 650 nm and having a core diameter greater than 0,4 mm but not exceeding 2 mm. I.A0.005 Nuclear reactor vessel components and testing equipment, other than those specified in 0A001, as follows: 0A001 I.A0.006 Nuclear detection systems, other than those specified in 0A001.j. or 1A004.c., for detection, identification or quantification of radioactive materials or radiation of nuclear origin and specially designed components thereof. N.B: For personal equipment refer to I.A1.004 below. 0A001.j. 1A004.c. I.A0.007 Bellows-sealed valves other than those specified in 0B001.c.6., 2A226 or 2B350, made of aluminium alloy or stainless steel type 304, 304L or 316L. 0B001.c.6. 2A226 2B350 I.A0.008 Laser mirrors, other than those specified in 6A005.e., consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica or sapphire). This item does not cover optical systems specially designed for astronomical applications, except if the mirrors contain fused silica. 0B001.g.5. 6A005.e. I.A0.009 Laser lenses, other than those specified in 6A005.e.2, consisting of substrates having a thermal expansion coefficient of 10-6 K-1 or less at 20 °C (e.g. fused silica). 0B001.g. 6A005.e.2. I.A0.010 Pipes, piping, flanges, fittings made of, or lined with nickel, or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1. 2B350 I.A0.011 Vacuum pumps other than those specified in 0B002.f.2. or 2B231, as follows: 0B002.f.2. 2B231 I.A0.012 Shielded enclosures for the manipulation, storage and handling of radioactive substances (hot cells). 0B006 I.A0.013 Natural uranium or depleted uranium or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing, other than those specified in 0C001. 0C001 I.A0.014 Detonation chambers having a capacity of explosion absorption of more than 2,5 kg TNT equivalent. (a) Iodine hollow cathode lamps with windows in pure silicon or quartz; (b) Uranium hollow cathode lamps. Pt_a_. 2. Seals; Pt_b_. 2. Internal components; (c) Sealing, testing and measurement equipment. Pt_a_. 3. Turbo-molecular pumps having a flow-rate equal to or greater than 400 l/s; Pt_b_. 3. Roots type vacuum roughing pumps having a volumetric aspiration flow-rate greater than 200 m3/h; Pt_c_. 2. Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps.

NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT I.A0.

a.

Iodine hollow cathode lamps with windows in pure silicon or quartz;

b.

Uranium hollow cathode lamps.

a.

Seals;

b.

Internal components;

c.

Sealing, testing and measurement equipment.

NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT I.A0. Note:

a.

Turbo-molecular pumps having a flow-rate equal to or greater than 400 l/s;

b.

Roots type vacuum roughing pumps having a volumetric aspiration flow-rate greater than 200 m3/h;

c.

Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps.

SPECIAL MATERIALS AND RELATED EQUIPMENT I.A1. Technical note: Technical note: Technical note: Technical notes: 1.2.

Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A1.001 Bis(2-ethylhexyl) phosphoric acid (HDEHP or D2HPA) Chemical Abstract Number (CAS): [CAS 298-07-7] solvent in any quantity, with a purity greater than 90 %. I.A1.002 Fluorine gas CAS: [7782-41-4], with a purity of at least 95 %. I.A1.003 Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials: 1A001 I.A1.004 Personal equipment for detecting radiation of nuclear origin, other than that specified in 1A004.c., including personal dosimeters. 1A004.c. I.A1.005 Electrolytic cells for fluorine production, other than those specified in 1B225, with an output capacity greater than 100 g of fluorine per hour. 1B225 I.A1.006 Catalysts, other than those specified in 1A225 or 1B231, containing platinum, palladium or rhodium, usable for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water. 1A225 1B231 I.A1.007 Aluminium and its alloys, other than those specified in 1C002.b.4. or 1C202.a., in crude or semi-fabricated form having either of the following characteristics: The phrase alloys capable of encompasses alloys before or after heat treatment. 1C002.b.4. 1C202.a. I.A1.008 Magnetic metals, of all types and of whatever form, other than those specified in 1C003.a. having an initial relative permeability of 120000 or more and a thickness between 0,05 mm and 0,1 mm. Measurement of initial relative permeability must be performed on fully annealed materials. 1C003.a. I.A1.009 Fibrous or filamentary materials or prepregs, other than those specified in 1C010.a., 1C010.b., 1C210.a. or 1C210.b., as follows: 1C010.a. 1C010.b. 1C210.a. 1C210.b. I.A1.010 Resin-impregnated or pitch-impregnated fibres (prepregs), metal or carbon-coated fibres (preforms) or carbon fibre preforms, as follows: 1C010 1C210 I.A1.011 Reinforced silicon carbide ceramic composites usable for nose tips, re-entry vehicles, nozzle flaps, usable in missiles, other than those specified in 1C107. 1C107 I.A1.012 Not used. I.A1.013 Tantalum, tantalum carbide, tungsten, tungsten carbide and alloys thereof, other than those specified in 1C226, having both of the following characteristics: 1C226 I.A1.014 Elemental powders of cobalt, neodymium or samarium or alloys or mixtures thereof containing at least 20 % by weight of cobalt, neodymium or samarium, with a particle size less than 200 μm. Elemental powder means a high purity powder of one element. I.A1.015 Pure tributyl phosphate (TBP) [CAS No 126-73-8] or any mixture having a TBP content of more than 5 % by weight. I.A1.016 Maraging steel, other than those specified by 1C116 or 1C216. The phrase maraging steel capable of encompasses maraging steel before or after heat treatment. Maraging steels are iron alloys generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy. 1C116 1C216 I.A1.017 Metals, metal powders and material as follows: 1C117 1C226 I.A1.018 Soft magnetic alloys, other than those specified in 1C003, having a chemical composition as follows: 1C003 I.A1.019 Not used. I.A1.020 Graphite, other than that specified in 0C004 or 1C107.a., designed or specified for use in Electrical Discharge Machining (EDM) machines. 0C004 1C107.a. (a) Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching; (b) Fluorinated polyimides containing 10 % by weight or more of combined fluorine; (c) Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine; (d) Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®); (e) Fluoro-elastomers (e.g. Viton ®, Tecnoflon ®); (f) Polytetrafluoroethylene (PTFE). Pt_a_. 2. Capable of an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); or Pt_b_. 2. Having a tensile strength of 415 MPa or more at 298 K (25 °C). (1a) specific modulus exceeding 10 × 106 m; or (2a) specific tensile strength exceeding 17 × 104 m; Pt_a_. 3. Aramid fibrous or filamentary materials having either of the following characteristics: (1a) specific modulus exceeding 3,18 × 106 m; or (2a) specific tensile strength exceeding 76,2 × 103 m; Pt_b_. 3. Glass fibrous or filamentary materials having either of the following characteristics: Pt_c_. 2. Thermoset resin-impregnated continuous yarns, rovings, tows or tapes with a width of 15 mm or less (once prepregs), made from glass fibrous or filamentary materials other than those specified in I.A1.010.a. below; Pt_d_. 2. Carbon fibrous or filamentary materials; Pt_e_. 2. Thermoset resin-impregnated continuous yarns, rovings, tows, or tapes, made from carbon fibrous or filamentary materials; Pt_f_. 2. Polyacrylonitrile (PAN) continuous yarns, rovings, tows or tapes; (g) Para-aramid fibrous or filamentary materials (Kevlar® and other Kevlar®-like fibres). Pt_a_. 4. Made from fibrous or filamentary materials specified in I.A1.009 above; Pt_b_. 4. Epoxy resin matrix impregnated carbon fibrous or filamentary materials (prepregs), specified in 1C010.a., 1C010.b. or 1C010.c., for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm; Pt_c_. 3. Prepregs specified in 1C010.a., 1C010.b. or 1C010.c., when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature. Pt_a_. 5. In forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and 300 mm; and Pt_b_. 5. A mass greater than 5 kg. Pt_a_. 6. Tungsten and tungsten alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm (micrometre) diameter or less with a tungsten content of 97 % by weight or more; Pt_b_. 6. Molybdenum and molybdenum alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm diameter or less with a molybdenum content of 97 % by weight or more; (1) Tungsten and alloys containing 97 % by weight or more of tungsten; (2) Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or (3) Silver infiltrated tungsten containing 80 % by weight or more of tungsten. Pt_c_. 4. Tungsten materials in the solid form, other than those specified in 1C226 having material compositions as follows: Pt_a_. 7. Iron content between 30 % and 60 %; and Pt_b_. 7. Cobalt content between 40 % and 60 %.

SPECIAL MATERIALS AND RELATED EQUIPMENT I.A1.

a.

Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching;

b.

Fluorinated polyimides containing 10 % by weight or more of combined fluorine;

c.

Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine;

d.

Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®);

e.

Fluoro-elastomers (e.g. Viton ®, Tecnoflon ®);

f.

Polytetrafluoroethylene (PTFE).

a.

Capable of an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); or

b.

Having a tensile strength of 415 MPa or more at 298 K (25 °C).

SPECIAL MATERIALS AND RELATED EQUIPMENT I.A1. Technical note: Technical note:

a.

Aramid fibrous or filamentary materials having either of the following characteristics: (1a) specific modulus exceeding 10 × 106 m; or (2a) specific tensile strength exceeding 17 × 104 m;

1.A specific modulus exceeding 10 × 106 m; or

2.A specific tensile strength exceeding 17 × 104 m;

b.

Glass fibrous or filamentary materials having either of the following characteristics: (1a) specific modulus exceeding 3,18 × 106 m; or (2a) specific tensile strength exceeding 76,2 × 103 m;

1.A specific modulus exceeding 3,18 × 106 m; or

2.A specific tensile strength exceeding 76,2 × 103 m;

c.

Thermoset resin-impregnated continuous yarns, rovings, tows or tapes with a width of 15 mm or less (once prepregs), made from glass fibrous or filamentary materials other than those specified in I.A1.010.a. below;

d.

Carbon fibrous or filamentary materials;

e.

Thermoset resin-impregnated continuous yarns, rovings, tows, or tapes, made from carbon fibrous or filamentary materials;

f.

Polyacrylonitrile (PAN) continuous yarns, rovings, tows or tapes;

g.

Para-aramid fibrous or filamentary materials (Kevlar® and other Kevlar®-like fibres).

a.

Made from fibrous or filamentary materials specified in I.A1.009 above;

b.

Epoxy resin matrix impregnated carbon fibrous or filamentary materials (prepregs), specified in 1C010.a., 1C010.b. or 1C010.c., for the repair of aircraft structures or laminates, of which the size of individual sheets does not exceed 50 cm × 90 cm;

c.

Prepregs specified in 1C010.a., 1C010.b. or 1C010.c., when impregnated with phenolic or epoxy resins having a glass transition temperature (Tg) less than 433 K (160 °C) and a cure temperature lower than the glass transition temperature.

a.

In forms having a hollow cylindrical or spherical symmetry (including cylinder segments) with an inside diameter between 50 mm and 300 mm; and

b.

A mass greater than 5 kg.

SPECIAL MATERIALS AND RELATED EQUIPMENT I.A1. Technical note: Technical note: Technical note: Technical notes: 1.2.

a.

Tungsten and tungsten alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm (micrometre) diameter or less with a tungsten content of 97 % by weight or more;

b.

Molybdenum and molybdenum alloys, other than those specified in 1C117, in the form of uniform spherical or atomized particles of 500 μm diameter or less with a molybdenum content of 97 % by weight or more;

c.

Tungsten materials in the solid form, other than those specified in 1C226 having material compositions as follows: (1) Tungsten and alloys containing 97 % by weight or more of tungsten; (2) Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or (3) Silver infiltrated tungsten containing 80 % by weight or more of tungsten.

1. Tungsten and alloys containing 97 % by weight or more of tungsten;

2. Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or

3. Silver infiltrated tungsten containing 80 % by weight or more of tungsten.

a.

Iron content between 30 % and 60 %; and

b.

Cobalt content between 40 % and 60 %.

MATERIALS PROCESSING I.A2. Technical note: Technical note: Technical note: Note: Technical note: Technical note: Note: Technical note: Technical notes: Technical note: Technical note: Technical note:

Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A2.001 Vibration test systems, equipment and components thereof, other than those specified in 2B116: bare table means a flat table, or surface, with no fixture or fittings. 2B116 I.A2.002 Machine tools, other than those specified in 2B001.c. or 2B201.b., for grinding having positioning accuracies with all compensations available equal to or less (better) than 15 μm according to ISO 230/2 (1988) or national equivalents along any linear axis. 2B001.c. 2B201.b. I.A2.002a Components and numerical controls, specially designed for machine tools specified in 2B001, 2B201 or I.A2.002 above. I.A2.003 Balancing machines and related equipment as follows: Indicator heads are sometimes known as balancing instrumentation. 2B119 I.A2.004 Remote manipulators that can be used to provide remote actions in radiochemical separation operations or hot cells, other than those specified in 2B225, having either of the following characteristics: Remote manipulators provide translation of human operator actions to a remote operating arm and terminal fixture. They may be of master/slave type or operated by joystick or keypad. 2B225 I.A2.005 Controlled atmosphere heat treatment furnaces or oxidation furnaces capable of operation at temperatures above 400 °C. This item does not cover tunnel kilns with roller or car conveyance, tunnel kilns with conveyor belt, pusher type kilns or shuttle kilns, specially designed for the production of glass, tableware ceramics or structural ceramics. 2B226 2B227 I.A2.006 Not used. I.A2.007 Pressure transducers, other than those defined in 2B230, capable of measuring absolute pressures at any point in the range 0 to 200 kPa and having both of the following characteristics: For the purposes of 2B230 accuracy includes non-linearity, hysteresis and repeatability at ambient temperature. 2B230 I.A2.008 Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, plate columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: Carbon graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight. 2B350.e. I.A2.009 Industrial equipment and components, other than those specified in 2B350.d., as follows: Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials: This item does not cover vehicle radiators. The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger. 2B350.d. I.A2.010 Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, or vacuum pumps and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials: The materials used for gaskets and seals and other implementations of sealing functions do not determine the status of control of the pump. The term rubber encompasses all kinds of natural and synthetic rubbers. 2B350.i. I.A2.011 Centrifugal separators, other than those specified in 2B352.c., capable of continuous separation without the propagation of aerosols and manufactured from: Centrifugal separators include decanters. 2B352.c. I.A2.012 Sintered metal filters, other than those specified in 2B352.d., made of nickel or nickel alloy with more than 40 % nickel by weight. 2B352.d. I.A2.013 Spin-forming machines and flow-forming machines, other than those specified by 2B009, 2B109 or 2B209 and specially designed components therefor. For the purpose of this item, machines combining the functions of spin-forming and flow-forming are regarded as flow-forming machines. 2B009 2B109 2B209 I.A2.014 Equipment and reagents, other than those specified in 2B350 or 2B352, as follows: 2B350 2B352 I.A2.015 Equipment, other than that specified in 2B005, 2B105 or 3B001.d., for the deposition of metallic overlays as follows, and specially designed components and accessories therefor: 2B005 2B105 3B001.d. I.A2.016 Open tanks or containers, with or without agitators, with a total internal (geometric) volume greater than 0.5 m3 (500 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials: The term rubber encompasses all kinds of natural and synthetic rubbers. 2B350 (a) Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured bare table; Pt_technical. note. Digital controllers, combined with specially designed vibration test software, with a real-time control bandwidth greater than 5 kHz designed for use with vibration test systems specified in a.; Real-time control bandwidth is defined as the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals. (c) Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured bare table, and usable in vibration test systems specified in a.; (d) Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured bare table, and usable in vibration systems specified in a. (1) Not capable of balancing rotors/assemblies having a mass greater than 3 kg; (2) Capable of balancing rotors/assemblies at speeds greater than 12500 rpm; (3) Capable of correcting unbalance in two planes or more; and (4) Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass; Pt_a_. 2. Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics: (b) Indicator heads designed or modified for use with machines specified in a. above. Pt_a_. 3. A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); or Pt_b_. 2. A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation). Pt_a_. 4. Pressure sensing elements made of or protected by Materials resistant to corrosion by uranium hexafluoride (UF6); and (1) A full scale of less than 200 kPa and an accuracy of better than ± 1 % of full scale; or (2) A full scale of 200 kPa or greater and an accuracy of better than 2 kPa. Pt_b_. 3. Having either of the following characteristics: Pt_a_. 5. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 4. Fluoropolymers; Pt_c_. 2. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 2. Graphite or carbon graphite; (e) Nickel or alloys with more than 40 % nickel by weight; (f) Tantalum or tantalum alloys; (g) Titanium or titanium alloys; (h) Zirconium or zirconium alloys; or (i) Stainless steel. Pt_a_. 6. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 5. Fluoropolymers; Pt_c_. 3. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 3. Graphite or carbon graphite; Pt_e_. 2. Nickel or alloys with more than 40 % nickel by weight; Pt_f_. 2. Tantalum or tantalum alloys; Pt_g_. 2. Titanium or titanium alloys; Pt_h_. 2. Zirconium or zirconium alloys; Pt_i_. 2. Silicon carbide; (j) Titanium carbide; or (k) Stainless steel. Pt_a_. 7. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 6. Ceramics; Pt_c_. 4. Ferrosilicon; Pt_d_. 4. Fluoropolymers; Pt_e_. 3. Glass (including vitrified or enamelled coatings or glass lining); Pt_f_. 3. Graphite or carbon graphite; Pt_g_. 3. Nickel or alloys with more than 40 % nickel by weight; Pt_h_. 3. Tantalum or tantalum alloys; Pt_i_. 3. Titanium or titanium alloys; Pt_j_. 2. Zirconium or zirconium alloys; Pt_k_. 2. Niobium (columbium) or niobium alloys; (l) Stainless steel; (m) Aluminium alloys; or (n) Rubber. Pt_a_. 8. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 7. Fluoropolymers; Pt_c_. 5. Glass (including vitrified or enamelled coating or glass lining); Pt_d_. 5. Nickel or alloys with more than 40 % nickel by weight; Pt_e_. 4. Tantalum or tantalum alloys; Pt_f_. 4. Titanium or titanium alloys; or Pt_g_. 4. Zirconium or zirconium alloys. Pt_a_. 9. Fermenters capable of cultivation of pathogenic micro-organisms or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more; Pt_technical_note_. 2. Agitators for fermenters as mentioned in a.above; Fermenters include bioreactors, chemostats and continuous-flow systems. (1) Polymerase chain reaction (PCR)-equipment (2) Genetic sequencing equipment; (3) Genetic synthesizers; (4) Electroporation equipment; (5) Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above; Pt_c_. 6. Laboratory equipment as follows: Pt_d_. 6. Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects; Pt_e_. 5. Ultracentrifuges, rotors and adaptors for ultracentrifuges; Pt_f_. 5. Freeze drying equipment. Pt_a_. 10. Chemical vapour deposition (CVD) production equipment; Pt_b_. 8. Physical vapour deposition (PVD) production equipment; Pt_c_. 7. Production equipment for deposition by means of inductive or resistance heating. Pt_a_. 11. Alloys with more than 25 % nickel and 20 % chromium by weight; Pt_b_. 9. Fluoropolymers; Pt_c_. 8. Glass (including vitrified or enamelled coatings or glass lining); Pt_d_. 7. Nickel or alloys with more than 40 % nickel by weight; Pt_e_. 6. Tantalum or tantalum alloys; Pt_f_. 6. Titanium or titanium alloys; Pt_g_. 5. Zirconium or zirconium alloys; Pt_h_. 4. Niobium (columbium) or niobium alloys; Pt_i_. 4. Stainless steel; Pt_j_. 3. Wood; or Pt_k_. 3. Rubber.

MATERIALS PROCESSING I.A2.

a.

Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at an acceleration equal to or greater than 0,1 g rms between 0,1 Hz and 2 kHz and imparting forces equal to or greater than 50 kN, measured bare table;

b. Technical note:

Digital controllers, combined with specially designed vibration test software, with a real-time control bandwidth greater than 5 kHz designed for use with vibration test systems specified in a.; Real-time control bandwidth is defined as the maximum rate at which a controller can execute complete cycles of sampling, processing data and transmitting control signals.

c.

Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force equal to or greater than 50 kN, measured bare table, and usable in vibration test systems specified in a.;

d.

Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force equal to or greater than 50 kN, measured bare table, and usable in vibration systems specified in a.

MATERIALS PROCESSING I.A2. Technical note:

a.

Balancing machines, designed or modified for dental or other medical equipment, having all the following characteristics: (1) Not capable of balancing rotors/assemblies having a mass greater than 3 kg; (2) Capable of balancing rotors/assemblies at speeds greater than 12500 rpm; (3) Capable of correcting unbalance in two planes or more; and (4) Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass;

1. Not capable of balancing rotors/assemblies having a mass greater than 3 kg;

2. Capable of balancing rotors/assemblies at speeds greater than 12500 rpm;

3. Capable of correcting unbalance in two planes or more; and

4. Capable of balancing to a residual specific unbalance of 0,2 g × mm per kg of rotor mass;

b.

Indicator heads designed or modified for use with machines specified in a. above.

MATERIALS PROCESSING I.A2. Technical note: Technical note:

a.

A capability of penetrating a hot cell wall of 0,3 m or more (through the wall operation); or

b.

A capability of bridging over the top of a hot cell wall with a thickness of 0,3 m or more (over the wall operation).

MATERIALS PROCESSING I.A2. Technical note: Technical note: Technical note: Note:

a.

Pressure sensing elements made of or protected by Materials resistant to corrosion by uranium hexafluoride (UF6); and

b.

Having either of the following characteristics: (1) A full scale of less than 200 kPa and an accuracy of better than ± 1 % of full scale; or (2) A full scale of 200 kPa or greater and an accuracy of better than 2 kPa.

1. A full scale of less than 200 kPa and an accuracy of better than ± 1 % of full scale; or

2. A full scale of 200 kPa or greater and an accuracy of better than 2 kPa.

MATERIALS PROCESSING I.A2. Technical note: Technical note: Technical note: Note: Technical note:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Fluoropolymers;

c.

Glass (including vitrified or enamelled coating or glass lining);

d.

Graphite or carbon graphite;

e.

Nickel or alloys with more than 40 % nickel by weight;

f.

Tantalum or tantalum alloys;

g.

Titanium or titanium alloys;

h.

Zirconium or zirconium alloys; or

i.

Stainless steel.

MATERIALS PROCESSING I.A2. Technical note: Technical note: Technical note: Note: Technical note: Technical note:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Fluoropolymers;

c.

Glass (including vitrified or enamelled coating or glass lining);

d.

Graphite or carbon graphite;

e.

Nickel or alloys with more than 40 % nickel by weight;

f.

Tantalum or tantalum alloys;

g.

Titanium or titanium alloys;

h.

Zirconium or zirconium alloys;

i.

Silicon carbide;

j.

Titanium carbide; or

k.

Stainless steel.

MATERIALS PROCESSING I.A2. Technical note: Technical note: Technical note: Note: Technical note: Technical note: Note: Technical note:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Ceramics;

c.

Ferrosilicon;

d.

Fluoropolymers;

e.

Glass (including vitrified or enamelled coatings or glass lining);

f.

Graphite or carbon graphite;

g.

Nickel or alloys with more than 40 % nickel by weight;

h.

Tantalum or tantalum alloys;

i.

Titanium or titanium alloys;

j.

Zirconium or zirconium alloys;

k.

Niobium (columbium) or niobium alloys;

l.

Stainless steel;

m.

Aluminium alloys; or

n.

Rubber.

MATERIALS PROCESSING I.A2. Technical note: Technical note: Technical note: Note: Technical note: Technical note: Note: Technical note: Technical notes:

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Fluoropolymers;

c.

Glass (including vitrified or enamelled coating or glass lining);

d.

Nickel or alloys with more than 40 % nickel by weight;

e.

Tantalum or tantalum alloys;

f.

Titanium or titanium alloys; or

g.

Zirconium or zirconium alloys.

MATERIALS PROCESSING I.A2. Technical note: Technical note: Technical note: Note: Technical note: Technical note: Note: Technical note: Technical notes: Technical note: Technical note:

a.

Fermenters capable of cultivation of pathogenic micro-organisms or viruses, or capable of toxin production, without the propagation of aerosols, and having a total capacity of 10 l or more;

b. Technical Note:

Agitators for fermenters as mentioned in a.above; Fermenters include bioreactors, chemostats and continuous-flow systems.

c.

Laboratory equipment as follows: (1) Polymerase chain reaction (PCR)-equipment (2) Genetic sequencing equipment; (3) Genetic synthesizers; (4) Electroporation equipment; (5) Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above;

1. Polymerase chain reaction (PCR)-equipment

2. Genetic sequencing equipment;

3. Genetic synthesizers;

4. Electroporation equipment;

5. Specific reagents associated with the equipment in I.A2.014.c. numbers 1. to 4. above;

d.

Filters, micro-filters, nano-filters or ultra-filters usable in industrial or laboratory biology for continuous filtering, except filters specially designed or modified for medical or clear water production purposes and to be used in the framework of EU or UN officially supported projects;

e.

Ultracentrifuges, rotors and adaptors for ultracentrifuges;

f.

Freeze drying equipment.

a.

Chemical vapour deposition (CVD) production equipment;

b.

Physical vapour deposition (PVD) production equipment;

c.

Production equipment for deposition by means of inductive or resistance heating.

a.

Alloys with more than 25 % nickel and 20 % chromium by weight;

b.

Fluoropolymers;

c.

Glass (including vitrified or enamelled coatings or glass lining);

d.

Nickel or alloys with more than 40 % nickel by weight;

e.

Tantalum or tantalum alloys;

f.

Titanium or titanium alloys;

g.

Zirconium or zirconium alloys;

h.

Niobium (columbium) or niobium alloys;

i.

Stainless steel;

j.

Wood; or

k.

Rubber.

ELECTRONICS I.A3. Technical notes: 1.2.

Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A3.001 High voltage direct current power supplies, other than those specified in 0B001.j.5. or 3A227, having both of the following characteristics: 0B001.j.5. 3A227 I.A3.002 Mass spectrometers, other than those specified in 0B002.g. or 3A233, capable of measuring ions of 200 atomic mass units or more and having a resolution of better than 2 parts in 200, as follows, and ion sources therefor: 0B002.g. 3A233 I.A3.003 Frequency changers or generators, other than those specified by 0B001.b.13. or 3A225, having all of the following characteristics, and specially designed components and software therefor: Frequency changers are also known as converters, inverters, generators, electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives. The functionality specified in this item may be met by certain equipment marketed as: electronic test equipment, AC power supplies, variable speed motor drives or variable frequency drives. 0B001.b.13. 3A225 I.A3.004 Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material. (a) Capable of continuously producing, over a time period of eight hours, 10 kV or more, with output power of 5 kW or more with or without sweeping; and (b) Current or voltage stability better than 0,1 % over a time period of four hours. Pt_a_. 2. Inductively coupled plasma mass spectrometers (ICP/MS); Pt_b_. 2. Glow discharge mass spectrometers (GDMS); (c) Thermal ionisation mass spectrometers (TIMS); (d) Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to corrosion by uranium hexafluoride UF6; (1) A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or (2) A source chamber constructed from, lined with or plated with materials resistant to UF6; (e) Molecular beam mass spectrometers having either of the following characteristics: (f) Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides. Pt_a_. 3. Multiphase output capable of providing a power of 40 W or greater; Pt_b_. 3. Capable of operating in the frequency range between 600 and 2000 Hz; and Pt_c_. 2. Frequency control better (less) than 0,1 %.

a.

Capable of continuously producing, over a time period of eight hours, 10 kV or more, with output power of 5 kW or more with or without sweeping; and

b.

Current or voltage stability better than 0,1 % over a time period of four hours.

a.

Inductively coupled plasma mass spectrometers (ICP/MS);

b.

Glow discharge mass spectrometers (GDMS);

c.

Thermal ionisation mass spectrometers (TIMS);

d.

Electron bombardment mass spectrometers which have a source chamber constructed from, lined with or plated with materials resistant to corrosion by uranium hexafluoride UF6;

e.

Molecular beam mass spectrometers having either of the following characteristics: (1) A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or (2) A source chamber constructed from, lined with or plated with materials resistant to UF6;

1. A source chamber constructed from, lined with or plated with stainless steel or molybdenum and equipped with a cold trap capable of cooling to 193 K (– 80 °C) or less; or

2. A source chamber constructed from, lined with or plated with materials resistant to UF6;

f.

Mass spectrometers equipped with a micro-fluorination ion source designed for actinides or actinide fluorides.

a.

Multiphase output capable of providing a power of 40 W or greater;

b.

Capable of operating in the frequency range between 600 and 2000 Hz; and

c.

Frequency control better (less) than 0,1 %.

SENSORS AND LASERS I.A6. Notes: 1.2. Note: Technical note: Note:

Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A6.001 Yttrium aluminium garnet (YAG) rods. I.A6.002 Optical equipment and components, other than those specified in 6A002 or 6A004.b. as follows: Infrared optics in the wavelength range 9 μm– 17 μm and components thereof, including cadmium telluride (CdTe) components. 6A002 6A004.b. I.A6.003 Wave front corrector systems, other than mirrors specified in 6A004.a., 6A005.e. or 6A005.f., for use with a laser beam having a diameter exceeding 4 mm, and specially designed components thereof, including control systems, phase front sensors and deformable mirrors including bimorph mirrors. 6A004.a. 6A005.e. 6A005.f. I.A6.004 Argon ion lasers, other than those specified in 0B001.g.5., 6A005.a.6. and/or 6A205.a., having an average output power equal to or greater than 5 W. 0B001.g.5. 6A005.a.6. 6A205.a. I.A6.005 Semiconductor lasers, other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.b., and components thereof, as follows: Semiconductor lasers are commonly called laser diodes. This item does not cover laser diodes with a wavelength in the range 1,2 μm – 2,0 μm. 0B001.g.5. 0B001.h.6. 6A005.b. I.A6.006 Tunable semiconductor lasers and tunable semiconductor laser arrays, other than those specified in 0B001.h.6. or 6A005.b., of a wavelength between 9 μm and 17 μm, as well as array stacks of semiconductor lasers containing at least one tunable semiconductor laser array of such wavelength. Semiconductor lasers are commonly called laser diodes. 0B001.h.6. 6A005.b. I.A6.007 Solid state tunablelasers, other than those specified in 0B001.g.5., 0B001.h.6. or 6A005.c.1., and specially designed components thereof, as follows: 0B001.g.5. 0B001.h.6. 6A005.c.1. I.A6.008 Neodymium-doped (other than glass) lasers, other than those specified in 6A005.c.2.b., having an output wavelength greater than 1,0 μm but not exceeding 1,1 μm and output energy exceeding 10 J per pulse. 6A005.c.2.b. I.A6.009 Components of acousto-optics, as follows: 6A203.b.4. I.A6.010 Radiation-hardened cameras, or lenses thereof, other than those specified in 6A203.c., specially designed, or rated as radiation-hardened, to withstand a total radiation dose greater than 50 × 103 Gy (silicon) (5 × 106 rad (silicon)) without operational degradation. The term Gy (silicon) refers to the energy in Joules per kilogram absorbed by an unshielded silicon sample when exposed to ionising radiation. 6A203.c. I.A6.011 Tunable pulsed dye laser amplifiers and oscillators, other than those specified in 0B001.g.5., 6A005 and or 6A205.c., having all of the following characteristics: This item does not cover single mode oscillators. 0B001.g.5. 6A005 6A205.c. I.A6.012 Pulsed carbon dioxide lasers, other than those specified in, 0B001.h.6., 6A005.d. or 6A205.d., having all of the following characteristics: 0B001.h.6. 6A005.d. 6A205.d. (a) Individual semiconductor lasers with an output power greater than 200 mW each, in quantities larger than 100; (b) Semiconductor laser arrays having an output power greater than 20 W. Pt_a_. 2. Titanium-sapphire lasers, Pt_b_. 2. Alexandrite lasers. Pt_a_. 3. Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz; Pt_b_. 3. Recurrence frequency supplies; (c) Pockels cells. Pt_a_. 4. Operating at wavelengths between 300 nm and 800 nm; Pt_b_. 4. An average output power greater than 10 W but not exceeding 30 W; Pt_c_. 2. A repetition rate greater than 1 kHz; and (d) Pulse width less than 100 ns. Pt_a_. 5. Operating at wavelengths between 9 μm and 11 μm; Pt_b_. 5. A repetition rate greater than 250 Hz; Pt_c_. 3. An average output power greater than 100 W but not exceeding 500 W; and Pt_d_. 2. Pulse width less than 200 ns.

SENSORS AND LASERS I.A6.

a.

Individual semiconductor lasers with an output power greater than 200 mW each, in quantities larger than 100;

b.

Semiconductor laser arrays having an output power greater than 20 W.

SENSORS AND LASERS I.A6. Notes: 1.2. Note:

a.

Titanium-sapphire lasers,

b.

Alexandrite lasers.

a.

Framing tubes and solid-state imaging devices having a recurrence frequency equal to or exceeding 1 kHz;

b.

Recurrence frequency supplies;

c.

Pockels cells.

SENSORS AND LASERS I.A6. Notes: 1.2. Note: Technical note:

a.

Operating at wavelengths between 300 nm and 800 nm;

b.

An average output power greater than 10 W but not exceeding 30 W;

c.

A repetition rate greater than 1 kHz; and

d.

Pulse width less than 100 ns.

SENSORS AND LASERS I.A6. Notes: 1.2. Note: Technical note: Note:

a.

Operating at wavelengths between 9 μm and 11 μm;

b.

A repetition rate greater than 250 Hz;

c.

An average output power greater than 100 W but not exceeding 500 W; and

d.

Pulse width less than 200 ns.

NAVIGATION AND AVIONICS I.A7. Note: Technical notes: 1.2.

Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A7.001 Inertial navigation systems and specially designed components thereof, as follows: The parameters of a.1. and a.2. are applicable with any of the following environmental conditions: a.2. refers to systems in which an INS and other independent navigation aids are built into a single unit (embedded) in order to achieve improved performance. Circular Error Probable (CEP) – In a circular normal distribution, the radius of the circle containing 50 percent of the individual measurements being made, or the radius of the circle within which there is a 50 percent probability of being located. 7A001 7A003 7A101 7A103 (a) Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or (b) Specified to function at linear acceleration levels exceeding 10 g; (1) Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for aircraft, land vehicle, vessels (surface or underwater) or spacecraft for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof: (2) Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with Data-Based Referenced Navigation (DBRN) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or DBRN for a period of up to four minutes, of less (better) than 10 metres Circular Error Probable (CEP); (a) Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or (b) Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec. (3) Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof: (a) Inertial navigation systems which are certified for use on civil aircraft by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows: (b) Theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof. (c) Inertial or other equipment using accelerometers specified in 7A001 or 7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations.v (a) A constant power spectral density (PSD) value of 0,04 g2/Hz over a frequency interval of 15 to 1000 Hz; and (b) The PSD attenuates with a frequency from 0,04 g2/Hz to 0,01 g2/Hz over a frequency interval from 1000 to 2000 Hz; (1) Input random vibration with an overall magnitude of 7,7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following: (2) A roll and yaw rate equal to or greater than + 2,62 radian/s (150 deg/s); or (3) According to national standards equivalent to 1. or 2. above.

NAVIGATION AND AVIONICS I.A7.

a.

Inertial navigation systems which are certified for use on civil aircraft by civil authorities of a State participating in the Wassenaar Arrangement, and specially designed components thereof, as follows: (a) Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or (b) Specified to function at linear acceleration levels exceeding 10 g; (1) Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for aircraft, land vehicle, vessels (surface or underwater) or spacecraft for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof: (2) Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with Data-Based Referenced Navigation (DBRN) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or DBRN for a period of up to four minutes, of less (better) than 10 metres Circular Error Probable (CEP); (a) Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or (b) Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec. (3) Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof:

1. Inertial navigation systems (INS) (gimballed or strapdown) and inertial equipment designed for aircraft, land vehicle, vessels (surface or underwater) or spacecraft for attitude, guidance or control, having any of the following characteristics, and specially designed components thereof: (a) Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or (b) Specified to function at linear acceleration levels exceeding 10 g;

1. a.

Navigation error (free inertial) subsequent to normal alignment of 0,8 nautical mile per hour (nm/hr) Circular Error Probable (CEP) or less (better); or

b.

Specified to function at linear acceleration levels exceeding 10 g;

2. Hybrid Inertial Navigation Systems embedded with Global Navigation Satellite Systems(s) (GNSS) or with Data-Based Referenced Navigation (DBRN) System(s) for attitude, guidance or control, subsequent to normal alignment, having an INS navigation position accuracy, after loss of GNSS or DBRN for a period of up to four minutes, of less (better) than 10 metres Circular Error Probable (CEP);

3. Inertial Equipment for Azimuth, Heading, or North Pointing having any of the following characteristics, and specially designed components thereof: (a) Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or (b) Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec.

3. a.

Designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude; or

b.

Designed to have a non-operating shock level of at least 900 g at a duration of at least 1 msec.

b.

Theodolite systems incorporating inertial equipment specially designed for civil surveying purposes and designed to have an Azimuth, Heading, or North Pointing accuracy equal to, or less (better) than 6 arc minutes RMS at 45 degrees latitude, and specially designed components thereof.

c.

Inertial or other equipment using accelerometers specified in 7A001 or 7A101, where such accelerometers are specially designed and developed as MWD (Measurement While Drilling) sensors for use in down-hole well services operations.v

NAVIGATION AND AVIONICS I.A7. Note:

1. Input random vibration with an overall magnitude of 7,7 g rms in the first half hour and a total test duration of one and a half hours per axis in each of the three perpendicular axes, when the random vibration meets the following: (a) A constant power spectral density (PSD) value of 0,04 g2/Hz over a frequency interval of 15 to 1000 Hz; and (b) The PSD attenuates with a frequency from 0,04 g2/Hz to 0,01 g2/Hz over a frequency interval from 1000 to 2000 Hz;

1. a.

A constant power spectral density (PSD) value of 0,04 g2/Hz over a frequency interval of 15 to 1000 Hz; and

b.

The PSD attenuates with a frequency from 0,04 g2/Hz to 0,01 g2/Hz over a frequency interval from 1000 to 2000 Hz;

2. A roll and yaw rate equal to or greater than + 2,62 radian/s (150 deg/s); or

3. According to national standards equivalent to 1. or 2. above.

AEROSPACE AND PROPULSION I.A9. Note:

Goods No Description Related item from Annex I to Regulation (EC) No 428/2009 I.A9.001 Explosive bolts. I.A9.002 Internal combustion engines (i.e. axial piston or rotary piston type), designed or modified for propelling aircrafts or lighter-than-air-vehicles and specially designed components therefor. I.A9.003 Trucks, other than those specified in 9A115, having more than one motorised axle and a payload exceeding 5 tonnes. This item includes flatbed trailers, semi trailers and other trailers. 9A115

B.

SOFTWARE No Description Related item from Annex I to Regulation (EC) No 428/2009 I.B.001 Software required for the development, production or use of the items in Part A. (Goods).

C.

TECHNOLOGY No Description Related item from Annex I to Regulation (EC) No 428/2009 I.C.001 Technology required for the development, production or use of the items in Part A. (Goods).

Versions

1. 2010-06-29