Address https://gelex.eu/eli/EU/regulation/2012/552@2012-06-21/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
3. ANNEX
4. ANNEX I Products referred to in point (1) of Article 1 ——
5. ANNEX II Products referred to in point (2) of Article 1

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) It is in the interest of the Union to suspend totally the autonomous Common Customs Tariff duties on a certain number of products currently not listed in the Annex to Council Regulation (EU) No 1344/2011.

(2) Six products with TARIC codes 2914390020, 2918300050, 3206110020, 3815120020, 3815120030 and 8302420080, which are currently listed in the Annex to Regulation (EU) No 1344/2011 should be deleted because it is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties for those products.

(3) It is necessary to modify the product description of the product with CN code 28191000 and the products with TARIC codes 2914199040, 2914700050, 2922498510, 3815199010, 3919900051, 3920102891, 3920510030, 3920910093, 8529909250 and 9401908010 in the Annex to Regulation (EU) No 1344/2011 in order to take account of technical product developments and economic trends on the market. Moreover, the existing TARIC codes 2009419270, 2009897992 and 8505199031 should be changed. In addition, for the product with TARIC code 3904400091 double classification is considered necessary.

(4) Those suspensions, for which technical modifications are necessary should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1344/2011 and should be reinserted in that list with new product descriptions, or new CN or TARIC codes.

(5) In view of their temporary nature, the suspensions listed in Annex I should be reviewed systematically, at the latest five years after their application or renewal. Moreover, closure of certain suspensions should be warranted at any time, as a result of a proposal of the Commission on the basis of a review carried out on initiative of the Commission or on request of one or more Member States if the suspensions are no longer in the Union’s interest to be maintained or due to technical product developments, to changed circumstances or to economic trends on the market.

(6) Since the suspensions laid down in this Regulation should take effect from 1 July 2012, this Regulation should apply from that date and should enter into force immediately upon its publication in the Official Journal of the European Union.

(7) Regulation (EU) No 1344/2011 should therefore be amended accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1344/2011 is amended as follows:

(1) the rows for the products listed in Annex I to this Regulation are inserted;

(2) the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 July 2012.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 21 June 2012. For the Council The President M. Frederiksen

ANNEX

ANNEX I Products referred to in point (1) of Article 1 ——

CN code TARIC Description Rate of autonomous duty Date foreseen for mandatory review ex20094192 20 Pineapple juice: 8 % 31.12.2015 ex20094199 70 used in the manufacture of products of drink industry ex20098979 20 Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more 0 % 31.12.2016 ex28111980 20 Hydrogen iodide (CAS RN 10034-85-2) 0 % 31.12.2016 28191000 Chromium trioxide (CAS RN 1333-82-0) 0 % 31.12.2016 ex28199090 10 Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9) 0 % 31.12.2016 ex28269080 15 Lithium hexafluorophosphate (CAS RN 21324-40-3) 0 % 31.12.2016 ex28500020 40 Germanium tetrahydride (CAS RN 7782-65-2) 0 % 31.12.2016 ex29033990 15 Perfluoro(4-methyl-2-pentene), (CAS RN 84650-68-0) 0 % 31.12.2016 ex29038990 40 Hexabromocyclododecane 0 % 31.12.2016 ex29072900 40 2,3,5-Trimethylhydroquinone (CAS RN 700-13-0) 0 % 31.12.2016 ex29072900 45 2-Methylhydroquinone (CAS RN 95-71-6) 0 % 31.12.2016 ex29092000 10 8-Methoxycedrane (CAS RN 19870-74-7) 0 % 31.12.2016 ex29093038 20 1,1’-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene], (CAS RN 21850-44-2) 0 % 31.12.2016 ex29109000 80 Allyl glycidyl ether (CAS RN 106-92-3) 0 % 31.12.2016 ex29141990 40 Pentan-2-one (CAS RN 107-87-9) 0 % 31.12.2012 ex29142900 50 trans-β-Damascone (CAS RN 23726-91-2) 0 % 31.12.2016 ex29145000 40 4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2) 0 % 31.12.2016 ex29146990 40 p-Benzoquinone (CAS RN 106-51-4) 0 % 31.12.2016 ex29147000 50 3’-Chloropropiophenone (CAS RN 34841-35-5) 0 % 31.12.2013 ex29161200 50 2-Hydroxyethyl acrylate with a purity by weight of 97 % or more (CAS RN 818-61-1) 0 % 31.12.2016 ex29163100 10 Benzyl benzoate (CAS RN 120-51-4) 0 % 31.12.2016 ex29189990 80 Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate, (CAS RN 62476-59-9) 0 % 31.12.2016 ex29199000 50 Triethyl phosphate (CAS RN 78-40-0) 0 % 31.12.2016 ex29224985 10 Ornithine aspartate (INNM), (CAS RN 3230-94-2) 0 % 31.12.2013 ex29242998 63 N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0) 0 % 31.12.2016 ex29280090 30 N-Isopropylhydroxylamine (CAS RN 5080-22-8) 0 % 31.12.2016 ex29309099 13 Mercaptamine hydrochloride (CAS RN 156-57-0) 0 % 31.12.2016 ex29309099 18 1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret, (CAS RN 106310-17-2) 0 % 31.12.2016 ex29319090 18 Trioctylphosphine oxide (CAS RN 78-50-2) 0 % 31.12.2016 ex29329900 20 Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1) 0 % 31.12.2016 ex29332990 70 Cyazofamid (ISO), (CAS RN 120116-88-3) 0 % 31.12.2016 ex29333999 70 2,3-Dichloro-5-trifluoromethylpyridine, (CAS RN 69045-84-7) 0 % 31.12.2016 ex29333999 72 5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one, (CAS RN 120014-30-4) 0 % 31.12.2016 ex29335995 72 Triacetylganciclovir (CAS RN 86357-14-4) 0 % 31.12.2016 ex29336980 72 Diethylhexyl butamido triazone (INCI), (CAS RN 154702-15-5) 0 % 31.12.2016 ex29339980 67 Candesartan ethyl ester (INNM), (CAS RN 139481-58-6) 0 % 31.12.2016 ex29349990 43 Clopidogrel acid hydrochloride (CAS RN 144750-42-5) 0 % 31.12.2016 ex29349990 48 Propan-2-ol - 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate, (CAS RN 864743-41-9) 0 % 31.12.2016 ex29350090 48 (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid - 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1), (CAS RN 1235588-99-4) 0 % 31.12.2016 ex32041200 10 Dye C.I. Acid Blue 9 0 % 31.12.2016 ex32041700 15 Dye C.I. Pigment Green 7 0 % 31.12.2016 ex32041700 20 Dye C.I. Pigment Blue 15:3 0 % 31.12.2016 ex32041700 25 Dye C.I. Pigment Yellow 14 0 % 31.12.2016 ex32041700 35 Dye C.I. Pigment Red 202 0 % 31.12.2016 ex32041700 45 Dye C.I. Pigment Violet 27 0 % 31.12.2016 ex32042000 20 Dye C.I. Fluorescent Brightener 71 0 % 31.12.2016 ex32042000 30 Dye C.I. Fluorescent Brightener 351 0 % 31.12.2016 ex32050000 20 Dye C.I. Carbon Black 7 Lake 0 % 31.12.2016 ex32061900 10 Preparation containing by weight: 0 % 31.12.2016 ex38019000 10 Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6) 0 % 31.12.2016 ex38123080 55 UV stabilizer, containing: 0 % 31.12.2016 ex38123080 60 Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9) 0 % 31.12.2016 ex38123080 65 Stabiliser for plastic material containing: 0 % 31.12.2016 ex38123080 70 Light stabiliser containing: 0 % 31.12.2016 ex38151990 10 Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method) 0 % 31.12.2016 ex38151990 87 Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) 0 % 31.12.2016 ex85069000 10 ex38170080 30 Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms 0 % 31.12.2016 ex38249097 26 Aqueous dispersion, containing by weight: 0 % 31.12.2016 ex38249097 31 Mixture containing by weight: 0 % 31.12.2016 ex38249097 32 Mixture of: 0 % 31.12.2016 ex38249097 33 Preparation, containing: 0 % 31.12.2016 ex39039090 60 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form 0 % 31.12.2016 ex39119099 60 ex39043000 30 Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: 0 % 31.12.2013 ex39044000 91 in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink ex39072011 50 [3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2) 0 % 31.12.2016 ex39072011 60 Preparation containing: 0 % 31.12.2016 ex39122011 10 Nitrocellulose 0 % 31.12.2016 ex39191080 80 Acrylic tape put up in rolls: 0 % 31.12.2016 ex39199000 83 for use in the manufacture of products of headings 8521 and 8528 ex39199000 51 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet 0 % 31.12.2013 ex39199000 85 Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper: 0 % 31.12.2016 ex39199000 87 Self adhesive transparent film, having a transmittance of more than 90 % and a haze of less than 3 % (as determined by ASTM D1003), consisting of several layers including: 0 % 31.12.2016 ex39201028 91 Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: 0 % 31.12.2013 ex39202021 40 Sheets of biaxially — oriented polypropylene film: 0 % 31.12.2016 ex39202029 50 Sheet of polypropylene in the form of a roll: 0 % 31.12.2016 ex85079030 95 for use in the manufacture of separators for lithium-ion electric vehicle batteries ex39205100 30 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm 0 % 31.12.2013 ex39209100 93 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: for use in the manufacture of heat-reflecting or decorative laminated glass 0 % 31.12.2013 ex39219090 10 Roll of polymer-metal laminate comprising: 0 % 31.12.2016 ex85079080 50 for use in the manufacture of lithium-ion electric vehicle batteries ex39231000 10 Photomask compacts: of a kind used in the photolithography production to house photomasks 0 % 31.12.2016 ex39269097 80 Parts of car radio front panels 0 % 31.12.2016 ex73181499 20 Rock bolt: 0 % 31.12.2016 ex73181499 29 of a kind used for support of mines ex73269098 40 TV pedestal stand with metal upper part for fixation and stabilization of TV cabinet case/body 0 % 31.12.2016 ex85299049 10 ex85299092 60 ex74101100 10 Roll of laminate foil of graphite and copper, with: 0 % 31.12.2016 ex85079080 60 a width of 610 mm or more but not more than 620 mm, and ex85459090 30 a diameter of 690 mm or more but not more than 710 mm, for use in the manufacture of lithium-ion electric vehicle batteries ex74102200 10 Cut plate of nickel-plated copper foil, with: 0 % 31.12.2016 ex85079080 70 for use in the manufacture of lithium-ion electric vehicle batteries ex76071190 40 Aluminium foil in rolls: 0 % 31.12.2016 ex76071990 10 Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: 0 % 31.12.2016 ex85079080 80 for use in the manufacture of cathodes for lithium-ion electric vehicle batteries ex76169990 70 Connecting components for use in the production of helicopter tail rotor shafts 0 % 31.12.2016 ex84828000 10 ex88033000 40 ex81089030 40 Wire of an titanium alloy containing by weight 0 % 31.12.2016 ex81089050 70 Strip of an alloy of titanium, containing by weight 0 % 31.12.2016 ex81089050 75 Plates, sheets, strips and foil of titanium alloy, containing by weight: 0 % 31.12.2016 ex81089050 80 Plates, sheets, strips and foil of cold rolled titanium alloy, containing by weight not more than: 0 % 31.12.2016 ex81089090 20 Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium 0 % 31.12.2016 ex90039000 10 ex81130020 10 Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide 0 % 31.12.2016 ex84099100 10 Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means 0 % 31.12.2016 ex84099900 20 ex84145980 40 Cross-flow fan, with; 0 % 31.12.2016 ex84149000 60 for use in the manufacture of indoor units of split-type air conditioning machines ex85013100 60 Brushless DC motor that can revolve counter clockwise (CCW), with: for use in the manufacture of indoor or outdoor units of split-type air conditioning machines 0 % 31.12.2016 ex85044082 40 Printed circuit board equipped with a bridge rectifier circuit and other active and passive components 0 % 31.12.2012 ex85051100 31 Permanent magnet having a remanence of 455 mT (± 15 mT) 0 % 31.12.2013 ex85051100 40 Neodymium-ferro ring with an external diameter of not more than 13 mm, an internal diameter of not more than 9 mm 0 % 31.12.2013 ex85076000 65 Cylindrical Lithium Ion Cell with 0 % 31.12.2016 ex85076000 75 Rectangular lithium-ion-accumulator, with 0 % 31.12.2016 ex85299092 50 Colour LCD display panel for LCD monitors of heading 8528: for use in the manufacture of vehicles of chapter 87 0 % 31.12.2015 ex87088099 10 Piston rod for shock-absorbers used in vehicle suspension systems with: 0 % 31.12.2016 ex88033000 50 Pre-formed helicopter rotor shafts 0 % 31.12.2016 ex90011090 30 Polymer optical fibre with: of a kind used in the manufacture of polymer fibre cables 0 % 31.12.2016 ex94019080 10 Ratchet disk of a kind used in the manufacture of reclining car seats 0 % 31.12.2015

not from concentrate,

of the genus Ananas,

of a Brix value of 11 or more but not more than 16,

72 % (± 2 %) of mica and

28 % (± 2 %) of titanium dioxide

2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and

either N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or

N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)

2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),

2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and

2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)

branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and

1-methoxy-2-propyl acetate (CAS RN 108-65-6)

76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2)

4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1) and

2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9)

70 % or more but not more than 80 % of bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7) and

20 % or more but not more than 30 % of methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate (CAS RN 82919-37-7)

basic zirconium carbonate (CAS RN 57219-64-4) and

cerium carbonate (CAS RN 537-01-9)

trioctylphosphine oxide (CAS RN 78-50-2),

dioctylhexylphosphine oxide (CAS RN 31160-66-4),

octyldihexylphosphine oxide (CAS RN 31160-64-2) and

trihexylphosphine oxide (CAS RN 597-50-2)

87 % or more but not more than 92 % of vinyl chloride,

2 % or more but not more than 9 % of vinyl acetate and

1 % or more but not more than 8 % of vinyl alcohol,

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)

self-adhesive on both sides,

of a total thickness of 0,04 mm or more, but not more than 1,25 mm,

of a total width of 5 mm or more but not more than 1205 mm

having a minimum reflectance of 93,5 % as determined by ASTM G173-03,

covered on one side with a removable layer of polyethylene,

covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner

an acrylic adhesive layer with a thickness of 20 μm or more but not more than 70 μm,

a polyurethane based layer with a thickness of 100 μm or more but not more than 300 μm

is repetitive and equally spaced along the length of the film

is equally and visibly aligned when viewed from the back or front of the film

with the thickness of not more than 0,1 mm,

printed on both sides with specialised coatings to allow banknote security printing

with a thickness of not more than 30 μm,

of a width of not more than 210 mm,

conforming to ASTM D882,

a visible light transmission of 50 % or more,

coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

a layer of poly(ethylene terephthalate),

a layer of aluminium,

a layer of polypropylene,

with a width of not more than 275 mm,

a total thickness of not more than 165 μm, and

conforming to ASTM D1701-91 and ASTM D882-95A

consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

having non porous, abrasion resistant or impact resistant surface properties,

fitted with a specially designed retainer system that protects the photomask from surface or cosmetic damage and

with or without a gasket seal,

of acrylonitrile-butadiene-styrene with or without polycarbonate,

coated with a copper, a nickel and a chrome layers,

with a total thickness of coating of 5,54 μm or more but not more than 22,3 μm

being a self-tapping screw,

with a length of more than 300 mm,

a width of 70 mm (± 5 mm),

a thickness of 0,4 mm (± 0,2 mm),

a length of not more than 55 mm,

having a purity of 99,99 % by weight,

of a thickness of 0,021 mm or more but not more than 0,2 mm,

with a width of 500 mm,

with a surface oxide layer by 3 to 4 nm thick,

and with a cubic texture of more than 95 %

a width of 595 mm or more but not more than 605 mm, and

a diameter of 690 mm or more but not more than 710 mm,

22 % (± 3 %) of vanadium and

4 % (± 0,5 %) of aluminium

15 % (± 1 %) of vanadium

3 % (± 0,5 %) of chromium

3 % (± 0,5 %) of tin and

3 % (± 0,5 %) of aluminium

0,3 % or more but not more than 0,7 % of aluminium and

0,25 % or more but not more than 0,6 % of silicon

0,25 % of iron,

0,20 % of oxygen,

0,08 % of carbon,

0,03 % of nitrogen and

0,013 % of hydrogen

a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm (± 1,0 mm),

a diameter of 95 mm (± 0,6 mm) or 102 mm (± 0,6 mm),

an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70 °C (± 5 °C),

an input voltage of 264 V or more, but not more than 391 V,

an external diameter of 81 mm (± 2,5 mm) or more, but not more than 150 mm (± 0,8 mm),

an output power of not more than 125 W,

E or B class winding insulation,

with two output connectors

with two input connectors which are available and useablein parallel

able to switch between bright and dimmed operation mode

with an input voltage of 40 V (+ 25 % –15 %) or 42 V (+ 25 % –15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or

with an input voltage of 230 V (+ 20 % –15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or

with an input voltage of 120 V (15 % –35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode

with an input current reaching 80 % of its nominal value within 20 ms

with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions

with an maximum inrush current overshoot of not more than 250 % of the input current

with a period of the inrush current overshoot of not more than 100ms

with an input current undershoot of not less than 50 % of the input current

with a period of the inrush current undershoot of not more than 20ms

with a presettable output current

with an output current reaching 90 % of its nominal pre-set value within 50 ms

with an output current reaching zero within 30 ms after removal of the input voltage

with an defined failure status in case of no-load or too-high load (end-of-life function)

3,5 VDC to 3,8 VDC,

300 mAh to 900 mAh and

a diameter of 10,0 mm to 14,5 mm

a metal casing,

a length of 173 mm (± 0,15 mm),

a width of 21 mm (± 0,1 mm),

a height of 91 mm (± 0,15 mm),

a nominal voltage of 3,3 V and,

a nominal capacity of 21 Ah or more

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

with background lighting, micro-controller,

with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,

in a housing with or without a heat sink at the back of the housing,

without a signal-processing module,

a diameter at its widest point of 12,4 mm or more, but not more than 28 mm,

a length of 236,5 mm or more, but not more than 563,5 mm

of circular cross-section,

with a length of 1249,68 mm or more, but not more than 1496,06 mm,

of an external diameter of 81,356 mm or more, but not more than 82,2198 mm,

swaged on both ends to an external diameter of 63,8683 mm or more, but not more than 66,802 mm,

heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772

a poly(methyl methacrylate) core,

a cladding of fluorinated polymer,

a diameter of not more than 3,0 mm, and

a length of more than 150 m,

ANNEX II Products referred to in point (2) of Article 1

CN code TARIC 20094192 70 20094199 70 20098979 92 28191000 29141990 40 29143900 20 29147000 50 29183000 50 29224985 10 32061100 20 38151990 10 38151200 20 38151200 30 39044000 91 39199000 51 39201028 91 39205100 30 39209100 93 83024200 80 85051990 31 85299092 50 94019080 10

Versions

1. 2012-06-21