Gelex

Commission Regulation (EU) No 171/2013 of 26 February 2013 amending Annexes I and IX, replacing Annex VIII to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive), and amending Annexes I and XII to Commission Regulation (EC) No 692/2008 implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information (Text with EEA relevance)

In forceVersion 2013-02-26from 2013-03-19
Grade B

mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.

Ask Gelex about this law

Address https://gelex.eu/eli/EU/regulation/2013/171@2013-02-26/en

Contents
  1. Preamble
    1. Article 1
    2. Article 2
    3. Article 3
    4. Article 4
  3. ANNEX
  4. ANNEX I
  5. (1)
  6. grp_1
  7. (2)
  8. ANNEX II
  9. ANNEX VIII Test Results
  10. 2.
  11. 2.1.
  12. 2.1.2. Type 2, low idle test: Type 2, high idle test:
  13. grp_2
  14. 2.3.
  15. 3.
  16. 4.1.2.3.4.5.
  17. Explanatory notes (h)
  18. ANNEX III
  19. (1)
  20. grp_1
  21. (iii)
  22. 2.6.1.2.3.4.5.
  23. (2)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive), and in particular Article 39(2) thereof,

Having regard to Commission Regulation (EC) No 692/2008 of 18 July 2008, implementing and amending Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, and in particular Articles 4(3), 5(4), 6(2) and Article 12 thereof,

Whereas:

(1) Article 12 of Regulation (EC) No 443/2009 of the European Parliament and of the Council of 23 April 2009 setting emission performance standards for new passenger cars as part of the Community’s integrated approach to reduce CO2 emissions from light-duty vehicles, provides that the CO2 savings achieved through the use of innovative technologies shall be considered for the calculation of each manufacturer’s average specific emissions of CO2. Detailed rules on the approval and certification of innovative technologies are set out in Commission Implementing Regulation (EU) No 725/2011 of 25 July 2011 establishing a procedure for the approval and certification of innovative technologies for reducing CO2 emissions from passenger cars pursuant to Regulation (EC) No 443/2009 of the European Parliament and of the Council.

(2) Paragraph 4 of Article 13 of Regulation (EC) No 443/2009 provides that the Commission shall review Directive 2007/46/EC, so that each type/variant/version corresponds to a unique set of innovative technologies.

(3) In order to ensure efficient monitoring of the specific CO2 savings for individual vehicles, vehicles fitted with eco-innovations should be certified as part of the type approval of a vehicle and the savings must, in accordance with Article 11(2) of Implementing Regulation (EU) No 725/2011, be specified separately in both the type approval documentation and the certificate of conformity in accordance with Directive 2007/46/EC.

(4) In consequence, it becomes necessary to modify the documents used in the type-approval process, in order to adequately reflect the information related to eco-innovations.

(5) The amendment of the documents used for type-approval aims, on the one hand, at providing the approval authorities with the adequate data for certifying vehicles fitted with eco-innovations, and, on the other hand, at integrating the CO2 savings of the eco-innovations as part of the representative information of a specific type, variant or version of vehicle.

(6) It is necessary to adapt Annex VIII to Directive 2007/46/EC, in order to include the relevant information about test results, as provided in the relevant emission legislation on pollutants from light duty and heavy duty vehicles.

(7) Directive 2007/46/EC and Regulation (EC) No 692/2008 should therefore be amended accordingly.

(8) The measures provided for in this Regulation are in accordance with the opinion of the Technical Committee — Motor Vehicles,

HAS ADOPTED THIS REGULATION:

Article 1

Annexes I and IX to Directive 2007/46/EC are amended in accordance with Annex I to this Regulation.

Article 2

Annex VIII to Directive 2007/46/EC is replaced as set out in Annex II to this Regulation.

Article 3

Annexes I and XII to Regulation (EC) No 692/2008 are amended in accordance with Annex III to this Regulation.

Article 4

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 26 February 2013. For the Commission The President José Manuel Barroso

ANNEX

Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 (if applicable) Grp. 2. 3.5.3.2. Existence of interactions between different eco-innovations: yes/no (1) Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations (repeat the table for each reference fuel tested) (w1) Decision approving the eco-innovation (w2) Code of the eco-innovation (w3) CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle (w4) CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF), i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)(w5) Grp. 1. 3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no (1) (a) the following points 3.5.3, 3.5.3.1, 3.5.3.2 and 3.5.3.3 are inserted: (b) in the Explanatory notes, the following explanatory notes are added: (w) Eco-innovations. (w1) Expand the table if necessary, using one extra row per eco-innovation. (w2) Number of the Commission Decision approving the eco-innovation. (w3) Assigned in the Commission Decision approving the eco-innovation. (w4) Under agreement of the type-approval authority, if a modelling methodology is applied instead of the type 1 test cycle, this value shall be the one provided by the modelling methodology. (w5) Sum of the CO2 emissions savings of each individual eco-innovation.; (1) Annex I is amended as follows: Grp. 1. 49.3.1. General code of the eco-innovation(s) (p1) Grp. 2. 49.3.2. Total CO2 emissions saving due to the eco-innovation(s) (p2) (repeat for each reference fuel tested); Grp. 1. 49.3. Vehicle fitted with eco-innovation(s): yes/no (1) (a) in Part I, Model B — Side 2 — Vehicle category M1 (complete and completed vehicles), the following entries 49.3, 49.3.1 and 49.3.2 are inserted: (1) Code of the approval authority as defined in Annex VII to this Directive, (2) Individual code of each eco-innovation fitted in the vehicle, indicated in chronological order of the Commission approval decisions. (b) in the Explanatory notes relating to Annex IX, the following explanatory notes are added: (p) Eco-innovations. (p1) The general code of the eco-innovation(s) shall consist of the following elements each separated by a blank space: (E.g. the general code of three eco-innovations approved chronologically as 10, 15 and 16 and fitted to a vehicle certified by the German type approval authority should be: e1 10 15 16.). (p2) Sum of the CO2 emissions savings of each individual eco-innovation.. (2) Annex IX is amended as follows: Anx. i. Annexes I and IX to Directive 2007/46/EC are amended as follows:

ANNEX I

Annexes I and IX to Directive 2007/46/EC are amended as follows: Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 (if applicable) Grp. 2. 3.5.3.2. Existence of interactions between different eco-innovations: yes/no (1) Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations (repeat the table for each reference fuel tested) (w1) Decision approving the eco-innovation (w2) Code of the eco-innovation (w3) CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle (w4) CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF), i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)(w5) Grp. 1. 3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no (1) (a) the following points 3.5.3, 3.5.3.1, 3.5.3.2 and 3.5.3.3 are inserted: (b) in the Explanatory notes, the following explanatory notes are added: (w) Eco-innovations. (w1) Expand the table if necessary, using one extra row per eco-innovation. (w2) Number of the Commission Decision approving the eco-innovation. (w3) Assigned in the Commission Decision approving the eco-innovation. (w4) Under agreement of the type-approval authority, if a modelling methodology is applied instead of the type 1 test cycle, this value shall be the one provided by the modelling methodology. (w5) Sum of the CO2 emissions savings of each individual eco-innovation.; (1) Annex I is amended as follows: Grp. 1. 49.3.1. General code of the eco-innovation(s) (p1) Grp. 2. 49.3.2. Total CO2 emissions saving due to the eco-innovation(s) (p2) (repeat for each reference fuel tested); Grp. 1. 49.3. Vehicle fitted with eco-innovation(s): yes/no (1) (a) in Part I, Model B — Side 2 — Vehicle category M1 (complete and completed vehicles), the following entries 49.3, 49.3.1 and 49.3.2 are inserted: (1) Code of the approval authority as defined in Annex VII to this Directive, (2) Individual code of each eco-innovation fitted in the vehicle, indicated in chronological order of the Commission approval decisions. (b) in the Explanatory notes relating to Annex IX, the following explanatory notes are added: (p) Eco-innovations. (p1) The general code of the eco-innovation(s) shall consist of the following elements each separated by a blank space: (E.g. the general code of three eco-innovations approved chronologically as 10, 15 and 16 and fitted to a vehicle certified by the German type approval authority should be: e1 10 15 16.). (p2) Sum of the CO2 emissions savings of each individual eco-innovation.. (2) Annex IX is amended as follows:

(1) Annex I is amended as follows: Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 (if applicable) Grp. 2. 3.5.3.2. Existence of interactions between different eco-innovations: yes/no (1) Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations (repeat the table for each reference fuel tested) (w1) Decision approving the eco-innovation (w2) Code of the eco-innovation (w3) CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle (w4) CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF), i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)(w5) Grp. 1. 3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no (1) (a) the following points 3.5.3, 3.5.3.1, 3.5.3.2 and 3.5.3.3 are inserted: (b) in the Explanatory notes, the following explanatory notes are added: (w) Eco-innovations. (w1) Expand the table if necessary, using one extra row per eco-innovation. (w2) Number of the Commission Decision approving the eco-innovation. (w3) Assigned in the Commission Decision approving the eco-innovation. (w4) Under agreement of the type-approval authority, if a modelling methodology is applied instead of the type 1 test cycle, this value shall be the one provided by the modelling methodology. (w5) Sum of the CO2 emissions savings of each individual eco-innovation.;

(1)

(a) the following points 3.5.3, 3.5.3.1, 3.5.3.2 and 3.5.3.3 are inserted: Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 (if applicable) Grp. 2. 3.5.3.2. Existence of interactions between different eco-innovations: yes/no (1) Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations (repeat the table for each reference fuel tested) (w1) Decision approving the eco-innovation (w2) Code of the eco-innovation (w3) CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle (w4) CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF), i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)(w5) Grp. 1. 3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no (1)

3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no (1) Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 (if applicable) Grp. 2. 3.5.3.2. Existence of interactions between different eco-innovations: yes/no (1) Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations (repeat the table for each reference fuel tested) (w1) Decision approving the eco-innovation (w2) Code of the eco-innovation (w3) CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle (w4) CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF), i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)(w5)

3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 (if applicable)

3.5.3.2. Existence of interactions between different eco-innovations: yes/no (1)

(a)

grp_1

1.2.3.4.5. 3.5.3.3. Emissions data related to the use of eco-innovations (repeat the table for each reference fuel tested) (w1) Decision approving the eco-innovation (w2) Code of the eco-innovation (w3) CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle (w4) CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF), i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)(w5)

(b) in the Explanatory notes, the following explanatory notes are added: (w) Eco-innovations. (w1) Expand the table if necessary, using one extra row per eco-innovation. (w2) Number of the Commission Decision approving the eco-innovation. (w3) Assigned in the Commission Decision approving the eco-innovation. (w4) Under agreement of the type-approval authority, if a modelling methodology is applied instead of the type 1 test cycle, this value shall be the one provided by the modelling methodology. (w5) Sum of the CO2 emissions savings of each individual eco-innovation.;

(2) Annex IX is amended as follows: Grp. 1. 49.3.1. General code of the eco-innovation(s) (p1) Grp. 2. 49.3.2. Total CO2 emissions saving due to the eco-innovation(s) (p2) (repeat for each reference fuel tested); Grp. 1. 49.3. Vehicle fitted with eco-innovation(s): yes/no (1) (a) in Part I, Model B — Side 2 — Vehicle category M1 (complete and completed vehicles), the following entries 49.3, 49.3.1 and 49.3.2 are inserted: (1) Code of the approval authority as defined in Annex VII to this Directive, (2) Individual code of each eco-innovation fitted in the vehicle, indicated in chronological order of the Commission approval decisions. (b) in the Explanatory notes relating to Annex IX, the following explanatory notes are added: (p) Eco-innovations. (p1) The general code of the eco-innovation(s) shall consist of the following elements each separated by a blank space: (E.g. the general code of three eco-innovations approved chronologically as 10, 15 and 16 and fitted to a vehicle certified by the German type approval authority should be: e1 10 15 16.). (p2) Sum of the CO2 emissions savings of each individual eco-innovation..

(2)

(a) in Part I, Model B — Side 2 — Vehicle category M1 (complete and completed vehicles), the following entries 49.3, 49.3.1 and 49.3.2 are inserted: Grp. 1. 49.3.1. General code of the eco-innovation(s) (p1) Grp. 2. 49.3.2. Total CO2 emissions saving due to the eco-innovation(s) (p2) (repeat for each reference fuel tested); Grp. 1. 49.3. Vehicle fitted with eco-innovation(s): yes/no (1)

49.3. Vehicle fitted with eco-innovation(s): yes/no (1) Grp. 1. 49.3.1. General code of the eco-innovation(s) (p1) Grp. 2. 49.3.2. Total CO2 emissions saving due to the eco-innovation(s) (p2) (repeat for each reference fuel tested);

49.3.1. General code of the eco-innovation(s) (p1)

49.3.2. Total CO2 emissions saving due to the eco-innovation(s) (p2) (repeat for each reference fuel tested);

(b) in the Explanatory notes relating to Annex IX, the following explanatory notes are added: (p) Eco-innovations. (p1) The general code of the eco-innovation(s) shall consist of the following elements each separated by a blank space: (E.g. the general code of three eco-innovations approved chronologically as 10, 15 and 16 and fitted to a vehicle certified by the German type approval authority should be: e1 10 15 16.). (p2) Sum of the CO2 emissions savings of each individual eco-innovation.. (1) Code of the approval authority as defined in Annex VII to this Directive, (2) Individual code of each eco-innovation fitted in the vehicle, indicated in chronological order of the Commission approval decisions.

Code of the approval authority as defined in Annex VII to this Directive,

Individual code of each eco-innovation fitted in the vehicle, indicated in chronological order of the Commission approval decisions.

ANNEX II

Grp. 1. Results of the sound level tests Number of the base regulatory act and latest amending regulatory act applicable to the approval. In case of a regulatory act with two or more implementation stages, indicate also the implementation stage: Variant/Version: … … … Moving (dB(A)/E): … … … Stationary (dB(A)/E): … … … at (min–1): … … … Grp. 211. Type 1 test (vehicle emissions in the test cycle after a cold start) Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … Grp_212_type_2_low_idle_test_type_2_high_idle. test. Type 2 test (emissions data required at type-approval for roadworthiness purposes) Variant/Version: … … … CO (% vol.) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Variant/Version: … … … CO (% vol.) … … … Lambda Value … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Grp. 3. 2.1.3. Type 3 test (emissions of crankcase gases): … Grp. 4. 2.1.4. Type 4 test (evaporative emissions): …g/test (1) Ageing distance covered (km)(e.g. 160000 km): … (2) Deterioration factor DF: calculated/fixed (3) Values: Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … Grp. 5. 2.1.5. Type 5 test (durability of anti-pollution control devices): Grp. 6. 2.1.6. Type 6 test (average emissions at low ambient temperatures): Variant/Version: … … … CO (g/km) … … … THC (g/km) … … … Grp. 217. OBD: yes/no Grp. 21. Emissions from motor vehicles tested under the test procedure for light duty vehicles Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: Fuel(s) … (diesel, petrol, LPG, NG, …Bi-fuel: petrol/NG, LPG…,Flex-fuel: petrol/etanol, NG/H2NG…) Grp. 221. Results of the ESC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … Grp. 222. Result of the ELR test Variant/Version: … … … Smoke value:…m–1 … … … Grp. 223. Result of the ETC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NMHC (mg/kWh) (1) … … … CH4 (mg/kWh) (1) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … Grp. 224. Idle test Variant/Version: … … … CO (% vol.) … … … Lambda Value (1) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Grp. 2. 2.2. Emissions from engines tested under the test procedure for heavy-duty vehicles. Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:… Fuel(s) … (diesel, petrol, LPG, NG, ethanol…) Grp. 231. Results of the test under free acceleration Variant/Version: … … … Corrected value of the absorption coefficient (m–1) … … … Normal engine idling speed … … … Maximum engine speed … … … Oil temperature (min./max.) … … … Grp. 23. Diesel smoke Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: Grp. 2. Results of the exhaust emission tests Grp. 31. Internal combustion engines, including not externally chargeable hybrid electric vehicles (NOVC) Variant/Version: … … … CO2 mass emission (urban conditions) (g/km) … … … CO2 mass emission (extra-urban conditions) (g/km) … … … CO2 mass emission (combined) (g/km) … … … Fuel consumption (urban conditions) (l/100 km) … … … Fuel consumption (extra-urban conditions) (l/100 km) … … … Fuel consumption (combined) (l/100 km) … … … Grp. 32. Externally chargeable hybrid electric vehicles (OVC) Variant/Version: … … … CO2 mass emission (Condition A, combined) (g/km) … … … CO2 mass emission (Condition B, combined) (g/km) … … … CO2 mass emission (weighted, combined) (g/km) … … … Fuel consumption (Condition A, combined) (l/100 km) (g) … … … Fuel consumption (Condition B, combined) (l/100 km) (g) … … … Fuel consumption (weighted, combined) (l/100 km) (g) … … … Electric energy consumption (Condition A, combined) (Wh/km) … … … Electric energy consumption (Condition B, combined) (Wh/km) … … … Electric energy consumption (weighted and combined) (Wh/km) … … … Pure electric range (km) … … … Grp. 33. Pure electric vehicles Variant/Version: … … … Electric energy consumption (Wh/km) … … … Range (km) … … … Grp. 34. Hydrogen fuel cell vehicles Variant/Version: … … … Fuel consumption (kg/100 km) … … … Grp. 3. Results of the CO2 emission, fuel/electric energy consumption, and electric range tests Number of the base regulatory act and the latest amending regulatory act applicable to the approval: Grp. 41. General code of the eco-innovation(s) Grp. 412345. Results of the tests for vehicles fitted with eco-innovation(s) Variant/Version … Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF) i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x … … … … … … … … … … … … … … … … … … … … … … … Total CO2 emissions saving (g/km) … Grp. notes. Eco-innovations. Grp. results. (To be completed by the type-approval authority and attached to the vehicle EC type-approval certificate) In each case, the information must make clear to which variant and version it is applicable. One version may not have more than one result. However, a combination of several results per version indicating the worst case is permissible. In the latter case, a note shall state that for items marked (*) only worst case results are given.

ANNEX VIII Test Results

(To be completed by the type-approval authority and attached to the vehicle EC type-approval certificate) In each case, the information must make clear to which variant and version it is applicable. One version may not have more than one result. However, a combination of several results per version indicating the worst case is permissible. In the latter case, a note shall state that for items marked (*) only worst case results are given. Grp. 1. Results of the sound level tests Number of the base regulatory act and latest amending regulatory act applicable to the approval. In case of a regulatory act with two or more implementation stages, indicate also the implementation stage: Variant/Version: … … … Moving (dB(A)/E): … … … Stationary (dB(A)/E): … … … at (min–1): … … … Grp. 211. Type 1 test (vehicle emissions in the test cycle after a cold start) Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … Grp_212_type_2_low_idle_test_type_2_high_idle. test. Type 2 test (emissions data required at type-approval for roadworthiness purposes) Variant/Version: … … … CO (% vol.) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Variant/Version: … … … CO (% vol.) … … … Lambda Value … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Grp. 3. 2.1.3. Type 3 test (emissions of crankcase gases): … Grp. 4. 2.1.4. Type 4 test (evaporative emissions): …g/test (1) Ageing distance covered (km)(e.g. 160000 km): … (2) Deterioration factor DF: calculated/fixed (3) Values: Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … Grp. 5. 2.1.5. Type 5 test (durability of anti-pollution control devices): Grp. 6. 2.1.6. Type 6 test (average emissions at low ambient temperatures): Variant/Version: … … … CO (g/km) … … … THC (g/km) … … … Grp. 217. OBD: yes/no Grp. 21. Emissions from motor vehicles tested under the test procedure for light duty vehicles Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: Fuel(s) … (diesel, petrol, LPG, NG, …Bi-fuel: petrol/NG, LPG…,Flex-fuel: petrol/etanol, NG/H2NG…) Grp. 221. Results of the ESC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … Grp. 222. Result of the ELR test Variant/Version: … … … Smoke value:…m–1 … … … Grp. 223. Result of the ETC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NMHC (mg/kWh) (1) … … … CH4 (mg/kWh) (1) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … Grp. 224. Idle test Variant/Version: … … … CO (% vol.) … … … Lambda Value (1) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Grp. 2. 2.2. Emissions from engines tested under the test procedure for heavy-duty vehicles. Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:… Fuel(s) … (diesel, petrol, LPG, NG, ethanol…) Grp. 231. Results of the test under free acceleration Variant/Version: … … … Corrected value of the absorption coefficient (m–1) … … … Normal engine idling speed … … … Maximum engine speed … … … Oil temperature (min./max.) … … … Grp. 23. Diesel smoke Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: Grp. 2. Results of the exhaust emission tests Grp. 31. Internal combustion engines, including not externally chargeable hybrid electric vehicles (NOVC) Variant/Version: … … … CO2 mass emission (urban conditions) (g/km) … … … CO2 mass emission (extra-urban conditions) (g/km) … … … CO2 mass emission (combined) (g/km) … … … Fuel consumption (urban conditions) (l/100 km) … … … Fuel consumption (extra-urban conditions) (l/100 km) … … … Fuel consumption (combined) (l/100 km) … … … Grp. 32. Externally chargeable hybrid electric vehicles (OVC) Variant/Version: … … … CO2 mass emission (Condition A, combined) (g/km) … … … CO2 mass emission (Condition B, combined) (g/km) … … … CO2 mass emission (weighted, combined) (g/km) … … … Fuel consumption (Condition A, combined) (l/100 km) (g) … … … Fuel consumption (Condition B, combined) (l/100 km) (g) … … … Fuel consumption (weighted, combined) (l/100 km) (g) … … … Electric energy consumption (Condition A, combined) (Wh/km) … … … Electric energy consumption (Condition B, combined) (Wh/km) … … … Electric energy consumption (weighted and combined) (Wh/km) … … … Pure electric range (km) … … … Grp. 33. Pure electric vehicles Variant/Version: … … … Electric energy consumption (Wh/km) … … … Range (km) … … … Grp. 34. Hydrogen fuel cell vehicles Variant/Version: … … … Fuel consumption (kg/100 km) … … … Grp. 3. Results of the CO2 emission, fuel/electric energy consumption, and electric range tests Number of the base regulatory act and the latest amending regulatory act applicable to the approval: Grp. 41. General code of the eco-innovation(s) Grp. 412345. Results of the tests for vehicles fitted with eco-innovation(s) Variant/Version … Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF) i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x … … … … … … … … … … … … … … … … … … … … … … … Total CO2 emissions saving (g/km) … Grp. notes. Eco-innovations.

1. Results of the sound level tests Number of the base regulatory act and latest amending regulatory act applicable to the approval. In case of a regulatory act with two or more implementation stages, indicate also the implementation stage: Variant/Version: … … … Moving (dB(A)/E): … … … Stationary (dB(A)/E): … … … at (min–1): … … …

2. Results of the exhaust emission tests Grp. 211. Type 1 test (vehicle emissions in the test cycle after a cold start) Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … Grp_212_type_2_low_idle_test_type_2_high_idle. test. Type 2 test (emissions data required at type-approval for roadworthiness purposes) Variant/Version: … … … CO (% vol.) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Variant/Version: … … … CO (% vol.) … … … Lambda Value … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Grp. 3. 2.1.3. Type 3 test (emissions of crankcase gases): … Grp. 4. 2.1.4. Type 4 test (evaporative emissions): …g/test (1) Ageing distance covered (km)(e.g. 160000 km): … (2) Deterioration factor DF: calculated/fixed (3) Values: Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … Grp. 5. 2.1.5. Type 5 test (durability of anti-pollution control devices): Grp. 6. 2.1.6. Type 6 test (average emissions at low ambient temperatures): Variant/Version: … … … CO (g/km) … … … THC (g/km) … … … Grp. 217. OBD: yes/no Grp. 21. Emissions from motor vehicles tested under the test procedure for light duty vehicles Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: Fuel(s) … (diesel, petrol, LPG, NG, …Bi-fuel: petrol/NG, LPG…,Flex-fuel: petrol/etanol, NG/H2NG…) Grp. 221. Results of the ESC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … Grp. 222. Result of the ELR test Variant/Version: … … … Smoke value:…m–1 … … … Grp. 223. Result of the ETC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NMHC (mg/kWh) (1) … … … CH4 (mg/kWh) (1) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … Grp. 224. Idle test Variant/Version: … … … CO (% vol.) … … … Lambda Value (1) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Grp. 2. 2.2. Emissions from engines tested under the test procedure for heavy-duty vehicles. Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:… Fuel(s) … (diesel, petrol, LPG, NG, ethanol…) Grp. 231. Results of the test under free acceleration Variant/Version: … … … Corrected value of the absorption coefficient (m–1) … … … Normal engine idling speed … … … Maximum engine speed … … … Oil temperature (min./max.) … … … Grp. 23. Diesel smoke Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:

2.

2.1. Emissions from motor vehicles tested under the test procedure for light duty vehicles Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: Fuel(s) … (diesel, petrol, LPG, NG, …Bi-fuel: petrol/NG, LPG…,Flex-fuel: petrol/etanol, NG/H2NG…) Grp. 211. Type 1 test (vehicle emissions in the test cycle after a cold start) Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … Grp_212_type_2_low_idle_test_type_2_high_idle. test. Type 2 test (emissions data required at type-approval for roadworthiness purposes) Variant/Version: … … … CO (% vol.) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Variant/Version: … … … CO (% vol.) … … … Lambda Value … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Grp. 3. 2.1.3. Type 3 test (emissions of crankcase gases): … Grp. 4. 2.1.4. Type 4 test (evaporative emissions): …g/test (1) Ageing distance covered (km)(e.g. 160000 km): … (2) Deterioration factor DF: calculated/fixed (3) Values: Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … … Grp. 5. 2.1.5. Type 5 test (durability of anti-pollution control devices): Grp. 6. 2.1.6. Type 6 test (average emissions at low ambient temperatures): Variant/Version: … … … CO (g/km) … … … THC (g/km) … … … Grp. 217. OBD: yes/no

2.1.

2.1.1. Type 1 test (vehicle emissions in the test cycle after a cold start) Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … …

2.1.2. Type 2, low idle test: Type 2, high idle test:

Type 2 test (emissions data required at type-approval for roadworthiness purposes) Variant/Version: … … … CO (% vol.) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … … Variant/Version: … … … CO (% vol.) … … … Lambda Value … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … …

2.1.3. Type 3 test (emissions of crankcase gases): …

2.1.4. Type 4 test (evaporative emissions): …g/test

2.1.5. Type 5 test (durability of anti-pollution control devices): (1) Ageing distance covered (km)(e.g. 160000 km): … (2) Deterioration factor DF: calculated/fixed (3) Values: Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … …

Ageing distance covered (km)(e.g. 160000 km): …

Deterioration factor DF: calculated/fixed

Values: Variant/Version: … … … CO (mg/km) … … … THC (mg/km) … … … NMHC (mg/km) … … … NOx (mg/km) … … … THC + NOx (mg/km) … … … Mass of particulate matter (PM) (mg/km) … … … Number of particles (P) (#/km) (1) … … …

2.1.6. Type 6 test (average emissions at low ambient temperatures): Variant/Version: … … … CO (g/km) … … … THC (g/km) … … …

2.1.7. OBD: yes/no

2.2. Emissions from engines tested under the test procedure for heavy-duty vehicles. Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage:… Fuel(s) … (diesel, petrol, LPG, NG, ethanol…) Grp. 221. Results of the ESC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … Grp. 222. Result of the ELR test Variant/Version: … … … Smoke value:…m–1 … … … Grp. 223. Result of the ETC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NMHC (mg/kWh) (1) … … … CH4 (mg/kWh) (1) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … … Grp. 224. Idle test Variant/Version: … … … CO (% vol.) … … … Lambda Value (1) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … …

grp_2

2.2.1. Results of the ESC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … …

2.2.2. Result of the ELR test Variant/Version: … … … Smoke value:…m–1 … … …

2.2.3. Result of the ETC test Variant/Version: … … … CO (mg/kWh) … … … THC (mg/kWh) … … … NMHC (mg/kWh) (1) … … … CH4 (mg/kWh) (1) … … … NOx (mg/kWh) … … … NH3 (ppm) (1) … … … PM mass (mg/kWh) … … … PM number (#/kWh) (1) … … …

2.2.4. Idle test Variant/Version: … … … CO (% vol.) … … … Lambda Value (1) … … … Engine speed (min–1) … … … Engine oil temperature (°C) … … …

2.3. Diesel smoke Indicate the latest amending regulatory act applicable to the approval. In case the regulatory act has two or more implementation stages, indicate also the implementation stage: Grp. 231. Results of the test under free acceleration Variant/Version: … … … Corrected value of the absorption coefficient (m–1) … … … Normal engine idling speed … … … Maximum engine speed … … … Oil temperature (min./max.) … … …

2.3.

2.3.1. Results of the test under free acceleration Variant/Version: … … … Corrected value of the absorption coefficient (m–1) … … … Normal engine idling speed … … … Maximum engine speed … … … Oil temperature (min./max.) … … …

3. Results of the CO2 emission, fuel/electric energy consumption, and electric range tests Number of the base regulatory act and the latest amending regulatory act applicable to the approval: Grp. 31. Internal combustion engines, including not externally chargeable hybrid electric vehicles (NOVC) Variant/Version: … … … CO2 mass emission (urban conditions) (g/km) … … … CO2 mass emission (extra-urban conditions) (g/km) … … … CO2 mass emission (combined) (g/km) … … … Fuel consumption (urban conditions) (l/100 km) … … … Fuel consumption (extra-urban conditions) (l/100 km) … … … Fuel consumption (combined) (l/100 km) … … … Grp. 32. Externally chargeable hybrid electric vehicles (OVC) Variant/Version: … … … CO2 mass emission (Condition A, combined) (g/km) … … … CO2 mass emission (Condition B, combined) (g/km) … … … CO2 mass emission (weighted, combined) (g/km) … … … Fuel consumption (Condition A, combined) (l/100 km) (g) … … … Fuel consumption (Condition B, combined) (l/100 km) (g) … … … Fuel consumption (weighted, combined) (l/100 km) (g) … … … Electric energy consumption (Condition A, combined) (Wh/km) … … … Electric energy consumption (Condition B, combined) (Wh/km) … … … Electric energy consumption (weighted and combined) (Wh/km) … … … Pure electric range (km) … … … Grp. 33. Pure electric vehicles Variant/Version: … … … Electric energy consumption (Wh/km) … … … Range (km) … … … Grp. 34. Hydrogen fuel cell vehicles Variant/Version: … … … Fuel consumption (kg/100 km) … … …

3.

3.1. Internal combustion engines, including not externally chargeable hybrid electric vehicles (NOVC) Variant/Version: … … … CO2 mass emission (urban conditions) (g/km) … … … CO2 mass emission (extra-urban conditions) (g/km) … … … CO2 mass emission (combined) (g/km) … … … Fuel consumption (urban conditions) (l/100 km) … … … Fuel consumption (extra-urban conditions) (l/100 km) … … … Fuel consumption (combined) (l/100 km) … … …

3.2. Externally chargeable hybrid electric vehicles (OVC) Variant/Version: … … … CO2 mass emission (Condition A, combined) (g/km) … … … CO2 mass emission (Condition B, combined) (g/km) … … … CO2 mass emission (weighted, combined) (g/km) … … … Fuel consumption (Condition A, combined) (l/100 km) (g) … … … Fuel consumption (Condition B, combined) (l/100 km) (g) … … … Fuel consumption (weighted, combined) (l/100 km) (g) … … … Electric energy consumption (Condition A, combined) (Wh/km) … … … Electric energy consumption (Condition B, combined) (Wh/km) … … … Electric energy consumption (weighted and combined) (Wh/km) … … … Pure electric range (km) … … …

3.3. Pure electric vehicles Variant/Version: … … … Electric energy consumption (Wh/km) … … … Range (km) … … …

3.4. Hydrogen fuel cell vehicles Variant/Version: … … … Fuel consumption (kg/100 km) … … …

4.1.2.3.4.5. Results of the tests for vehicles fitted with eco-innovation(s) Variant/Version … Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF) i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x … … … … … … … … … … … … … … … … … … … … … … … Total CO2 emissions saving (g/km) … Grp. 41. General code of the eco-innovation(s)

4.1.2.3.4.5.

4.1. General code of the eco-innovation(s)

Explanatory notes (h)

Eco-innovations.

Grp. 1. 4.3.5.1. In the case of a vehicle type fitted with one or more eco-innovations, within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011, the conformity of production shall be demonstrated with respect to the eco-innovations, by performing the tests provided for in the Commission Decision(s) approving the eco-innovation(s) in question. Grp. 2. 4.3.5.2. Points 4.3.1., 4.3.2. and 4.3.4 shall apply.; Grp. 435. Vehicle fitted with eco-innovations (a) the following points 4.3.5, 4.3.5.1 and 4.3.5.2 are inserted: Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 Grp. 2. 3.5.3.2. Interactions existing between different eco-innovations: yes/no Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) Grp. 1. 3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no (b) in the Appendix 3, the following points 3.5.3, 3.5.3.1, 3.5.3.2 and 3.5.3.3 are inserted: (i) in point 2.1, the table corresponding to the Type 6 test is replaced by the following: Type 6 CO (g/km) THC (g/km) Measured value Grp. 1. 2.1.1. For bi fuel vehicles, the type 1 table shall be repeated for both fuels. For flex fuel vehicles, when the type 1 test is to be performed on both fuels according to Figure I.2.4 of Annex I to Regulation (EC) No 692/2008, and for vehicles running on LPG or NG/Biomethane, either mono fuel or bi fuel, the table shall be repeated for the different reference gases used in the test, and an additional table shall display the worst results obtained. When applicable, in accordance with sections 1.1.2.4 and 1.1.2.5 of Annex I to Regulation (EC) No 692/2008, it shall be shown if the results are measured or calculated.; (ii) point 2.1.1 is replaced by the following: Grp. 261. General code of the eco-innovation(s) Grp. 2612345. Test results of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) (iii) the following points 2.6 and 2.6.1 are inserted: (c) Addendum to Appendix 4 is amended as follows: (1) Annex I is amended as follows: Grp. 1. 4.1. According to Article 11(1) of Implementing Regulation (EU) No 725/2011, a manufacturer that wants to benefit from a reduction of its average specific CO2 emissions, as result of the savings achieved by one or more eco-innovations fitted in a vehicle, shall apply to an approval authority for an EC type-approval certificate of the vehicle fitted with the eco-innovations. Grp. 2. 4.2. The CO2 emissions savings from the vehicle fitted with eco-innovations shall, for the purpose of type-approval, be determined using the procedure and testing methodology specified in the decision by the Commission approving the eco-innovation, in accordance with Article 10 of Implementing Regulation (EU) No 725/2011. Grp. 3. 4.3. The performance of the necessary tests for the determination of the CO2 emission savings achieved by the eco-innovations, shall be understood without prejudice of the demonstration of compliance of the eco-innovations with the technical prescriptions laid down in Directive 2007/46/EC, if applicable. Grp. 4. 4.4. The type-approval shall not be awarded if the eco-innovation vehicle does not show a minimum of 1 g CO2/km of emissions reduction with respect to the baseline vehicle, as defined in article 5 of Implementing Regulation (EU) No 725/2011.. Grp. 4. TYPE-APPROVAL OF VEHICLES FITTED WITH ECO-INNOVATIONS (2) In Annex XII the following point 4 is added: Anx. iii. Annexes I and XII to Regulation (EC) No 692/2008 are amended as follows:

ANNEX III

Annexes I and XII to Regulation (EC) No 692/2008 are amended as follows: Grp. 1. 4.3.5.1. In the case of a vehicle type fitted with one or more eco-innovations, within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011, the conformity of production shall be demonstrated with respect to the eco-innovations, by performing the tests provided for in the Commission Decision(s) approving the eco-innovation(s) in question. Grp. 2. 4.3.5.2. Points 4.3.1., 4.3.2. and 4.3.4 shall apply.; Grp. 435. Vehicle fitted with eco-innovations (a) the following points 4.3.5, 4.3.5.1 and 4.3.5.2 are inserted: Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 Grp. 2. 3.5.3.2. Interactions existing between different eco-innovations: yes/no Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) Grp. 1. 3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no (b) in the Appendix 3, the following points 3.5.3, 3.5.3.1, 3.5.3.2 and 3.5.3.3 are inserted: (i) in point 2.1, the table corresponding to the Type 6 test is replaced by the following: Type 6 CO (g/km) THC (g/km) Measured value Grp. 1. 2.1.1. For bi fuel vehicles, the type 1 table shall be repeated for both fuels. For flex fuel vehicles, when the type 1 test is to be performed on both fuels according to Figure I.2.4 of Annex I to Regulation (EC) No 692/2008, and for vehicles running on LPG or NG/Biomethane, either mono fuel or bi fuel, the table shall be repeated for the different reference gases used in the test, and an additional table shall display the worst results obtained. When applicable, in accordance with sections 1.1.2.4 and 1.1.2.5 of Annex I to Regulation (EC) No 692/2008, it shall be shown if the results are measured or calculated.; (ii) point 2.1.1 is replaced by the following: Grp. 261. General code of the eco-innovation(s) Grp. 2612345. Test results of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) (iii) the following points 2.6 and 2.6.1 are inserted: (c) Addendum to Appendix 4 is amended as follows: (1) Annex I is amended as follows: Grp. 1. 4.1. According to Article 11(1) of Implementing Regulation (EU) No 725/2011, a manufacturer that wants to benefit from a reduction of its average specific CO2 emissions, as result of the savings achieved by one or more eco-innovations fitted in a vehicle, shall apply to an approval authority for an EC type-approval certificate of the vehicle fitted with the eco-innovations. Grp. 2. 4.2. The CO2 emissions savings from the vehicle fitted with eco-innovations shall, for the purpose of type-approval, be determined using the procedure and testing methodology specified in the decision by the Commission approving the eco-innovation, in accordance with Article 10 of Implementing Regulation (EU) No 725/2011. Grp. 3. 4.3. The performance of the necessary tests for the determination of the CO2 emission savings achieved by the eco-innovations, shall be understood without prejudice of the demonstration of compliance of the eco-innovations with the technical prescriptions laid down in Directive 2007/46/EC, if applicable. Grp. 4. 4.4. The type-approval shall not be awarded if the eco-innovation vehicle does not show a minimum of 1 g CO2/km of emissions reduction with respect to the baseline vehicle, as defined in article 5 of Implementing Regulation (EU) No 725/2011.. Grp. 4. TYPE-APPROVAL OF VEHICLES FITTED WITH ECO-INNOVATIONS (2) In Annex XII the following point 4 is added:

(1) Annex I is amended as follows: Grp. 1. 4.3.5.1. In the case of a vehicle type fitted with one or more eco-innovations, within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011, the conformity of production shall be demonstrated with respect to the eco-innovations, by performing the tests provided for in the Commission Decision(s) approving the eco-innovation(s) in question. Grp. 2. 4.3.5.2. Points 4.3.1., 4.3.2. and 4.3.4 shall apply.; Grp. 435. Vehicle fitted with eco-innovations (a) the following points 4.3.5, 4.3.5.1 and 4.3.5.2 are inserted: Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 Grp. 2. 3.5.3.2. Interactions existing between different eco-innovations: yes/no Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) Grp. 1. 3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no (b) in the Appendix 3, the following points 3.5.3, 3.5.3.1, 3.5.3.2 and 3.5.3.3 are inserted: (i) in point 2.1, the table corresponding to the Type 6 test is replaced by the following: Type 6 CO (g/km) THC (g/km) Measured value Grp. 1. 2.1.1. For bi fuel vehicles, the type 1 table shall be repeated for both fuels. For flex fuel vehicles, when the type 1 test is to be performed on both fuels according to Figure I.2.4 of Annex I to Regulation (EC) No 692/2008, and for vehicles running on LPG or NG/Biomethane, either mono fuel or bi fuel, the table shall be repeated for the different reference gases used in the test, and an additional table shall display the worst results obtained. When applicable, in accordance with sections 1.1.2.4 and 1.1.2.5 of Annex I to Regulation (EC) No 692/2008, it shall be shown if the results are measured or calculated.; (ii) point 2.1.1 is replaced by the following: Grp. 261. General code of the eco-innovation(s) Grp. 2612345. Test results of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) (iii) the following points 2.6 and 2.6.1 are inserted: (c) Addendum to Appendix 4 is amended as follows:

(1)

(a) the following points 4.3.5, 4.3.5.1 and 4.3.5.2 are inserted: Grp. 1. 4.3.5.1. In the case of a vehicle type fitted with one or more eco-innovations, within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011, the conformity of production shall be demonstrated with respect to the eco-innovations, by performing the tests provided for in the Commission Decision(s) approving the eco-innovation(s) in question. Grp. 2. 4.3.5.2. Points 4.3.1., 4.3.2. and 4.3.4 shall apply.; Grp. 435. Vehicle fitted with eco-innovations

(a)

4.3.5. Vehicle fitted with eco-innovations Grp. 1. 4.3.5.1. In the case of a vehicle type fitted with one or more eco-innovations, within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011, the conformity of production shall be demonstrated with respect to the eco-innovations, by performing the tests provided for in the Commission Decision(s) approving the eco-innovation(s) in question. Grp. 2. 4.3.5.2. Points 4.3.1., 4.3.2. and 4.3.4 shall apply.;

4.3.5.1. In the case of a vehicle type fitted with one or more eco-innovations, within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011, the conformity of production shall be demonstrated with respect to the eco-innovations, by performing the tests provided for in the Commission Decision(s) approving the eco-innovation(s) in question.

4.3.5.2. Points 4.3.1., 4.3.2. and 4.3.4 shall apply.;

(b) in the Appendix 3, the following points 3.5.3, 3.5.3.1, 3.5.3.2 and 3.5.3.3 are inserted: Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 Grp. 2. 3.5.3.2. Interactions existing between different eco-innovations: yes/no Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) Grp. 1. 3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no

3.5.3. Vehicle fitted with an eco-innovation within the meaning of Article 12 of Regulation (EC) No 443/2009 and Implementing Regulation (EU) No 725/2011: yes/no Grp. 1. 3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011 Grp. 2. 3.5.3.2. Interactions existing between different eco-innovations: yes/no Grp. 12345. 3.5.3.3. Emissions data related to the use of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)

3.5.3.1. Type/Variant/Version of the baseline vehicle as defined in Article 5 of Implementing Regulation (EU) No 725/2011

3.5.3.2. Interactions existing between different eco-innovations: yes/no

(b)

grp_1

1.2.3.4.5. 3.5.3.3. Emissions data related to the use of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)

(c) Addendum to Appendix 4 is amended as follows: (i) in point 2.1, the table corresponding to the Type 6 test is replaced by the following: Type 6 CO (g/km) THC (g/km) Measured value Grp. 1. 2.1.1. For bi fuel vehicles, the type 1 table shall be repeated for both fuels. For flex fuel vehicles, when the type 1 test is to be performed on both fuels according to Figure I.2.4 of Annex I to Regulation (EC) No 692/2008, and for vehicles running on LPG or NG/Biomethane, either mono fuel or bi fuel, the table shall be repeated for the different reference gases used in the test, and an additional table shall display the worst results obtained. When applicable, in accordance with sections 1.1.2.4 and 1.1.2.5 of Annex I to Regulation (EC) No 692/2008, it shall be shown if the results are measured or calculated.; (ii) point 2.1.1 is replaced by the following: Grp. 261. General code of the eco-innovation(s) Grp. 2612345. Test results of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) (iii) the following points 2.6 and 2.6.1 are inserted:

(c)

(i) in point 2.1, the table corresponding to the Type 6 test is replaced by the following: Type 6 CO (g/km) THC (g/km) Measured value

(ii) point 2.1.1 is replaced by the following: Grp. 1. 2.1.1. For bi fuel vehicles, the type 1 table shall be repeated for both fuels. For flex fuel vehicles, when the type 1 test is to be performed on both fuels according to Figure I.2.4 of Annex I to Regulation (EC) No 692/2008, and for vehicles running on LPG or NG/Biomethane, either mono fuel or bi fuel, the table shall be repeated for the different reference gases used in the test, and an additional table shall display the worst results obtained. When applicable, in accordance with sections 1.1.2.4 and 1.1.2.5 of Annex I to Regulation (EC) No 692/2008, it shall be shown if the results are measured or calculated.;

2.1.1. For bi fuel vehicles, the type 1 table shall be repeated for both fuels. For flex fuel vehicles, when the type 1 test is to be performed on both fuels according to Figure I.2.4 of Annex I to Regulation (EC) No 692/2008, and for vehicles running on LPG or NG/Biomethane, either mono fuel or bi fuel, the table shall be repeated for the different reference gases used in the test, and an additional table shall display the worst results obtained. When applicable, in accordance with sections 1.1.2.4 and 1.1.2.5 of Annex I to Regulation (EC) No 692/2008, it shall be shown if the results are measured or calculated.;

(iii) the following points 2.6 and 2.6.1 are inserted: Grp. 261. General code of the eco-innovation(s) Grp. 2612345. Test results of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km)

(iii)
2.6.1.2.3.4.5.

Test results of eco-innovations Decision approving the eco-innovation Code of the eco-innovation CO2 emissions of the baseline vehicle (g/km) CO2 emissions of the eco-innovation vehicle (g/km) CO2 emissions of the baseline vehicle under type 1 test-cycle CO2 emissions of the eco-innovation vehicle under type 1 test-cycle (= 3.5.1.3) Usage factor (UF)i.e. temporal share of technology usage in normal operation conditions CO2 emissions savings 1 – 2 – 3 – 4*5 xxxx/201x Total CO2 emissions saving (g/km) Grp. 261. General code of the eco-innovation(s)

2.6.1. General code of the eco-innovation(s)

(2) In Annex XII the following point 4 is added: Grp. 1. 4.1. According to Article 11(1) of Implementing Regulation (EU) No 725/2011, a manufacturer that wants to benefit from a reduction of its average specific CO2 emissions, as result of the savings achieved by one or more eco-innovations fitted in a vehicle, shall apply to an approval authority for an EC type-approval certificate of the vehicle fitted with the eco-innovations. Grp. 2. 4.2. The CO2 emissions savings from the vehicle fitted with eco-innovations shall, for the purpose of type-approval, be determined using the procedure and testing methodology specified in the decision by the Commission approving the eco-innovation, in accordance with Article 10 of Implementing Regulation (EU) No 725/2011. Grp. 3. 4.3. The performance of the necessary tests for the determination of the CO2 emission savings achieved by the eco-innovations, shall be understood without prejudice of the demonstration of compliance of the eco-innovations with the technical prescriptions laid down in Directive 2007/46/EC, if applicable. Grp. 4. 4.4. The type-approval shall not be awarded if the eco-innovation vehicle does not show a minimum of 1 g CO2/km of emissions reduction with respect to the baseline vehicle, as defined in article 5 of Implementing Regulation (EU) No 725/2011.. Grp. 4. TYPE-APPROVAL OF VEHICLES FITTED WITH ECO-INNOVATIONS

(2)

4. TYPE-APPROVAL OF VEHICLES FITTED WITH ECO-INNOVATIONS Grp. 1. 4.1. According to Article 11(1) of Implementing Regulation (EU) No 725/2011, a manufacturer that wants to benefit from a reduction of its average specific CO2 emissions, as result of the savings achieved by one or more eco-innovations fitted in a vehicle, shall apply to an approval authority for an EC type-approval certificate of the vehicle fitted with the eco-innovations. Grp. 2. 4.2. The CO2 emissions savings from the vehicle fitted with eco-innovations shall, for the purpose of type-approval, be determined using the procedure and testing methodology specified in the decision by the Commission approving the eco-innovation, in accordance with Article 10 of Implementing Regulation (EU) No 725/2011. Grp. 3. 4.3. The performance of the necessary tests for the determination of the CO2 emission savings achieved by the eco-innovations, shall be understood without prejudice of the demonstration of compliance of the eco-innovations with the technical prescriptions laid down in Directive 2007/46/EC, if applicable. Grp. 4. 4.4. The type-approval shall not be awarded if the eco-innovation vehicle does not show a minimum of 1 g CO2/km of emissions reduction with respect to the baseline vehicle, as defined in article 5 of Implementing Regulation (EU) No 725/2011..

4.1. According to Article 11(1) of Implementing Regulation (EU) No 725/2011, a manufacturer that wants to benefit from a reduction of its average specific CO2 emissions, as result of the savings achieved by one or more eco-innovations fitted in a vehicle, shall apply to an approval authority for an EC type-approval certificate of the vehicle fitted with the eco-innovations.

4.2. The CO2 emissions savings from the vehicle fitted with eco-innovations shall, for the purpose of type-approval, be determined using the procedure and testing methodology specified in the decision by the Commission approving the eco-innovation, in accordance with Article 10 of Implementing Regulation (EU) No 725/2011.

4.3. The performance of the necessary tests for the determination of the CO2 emission savings achieved by the eco-innovations, shall be understood without prejudice of the demonstration of compliance of the eco-innovations with the technical prescriptions laid down in Directive 2007/46/EC, if applicable.

4.4. The type-approval shall not be awarded if the eco-innovation vehicle does not show a minimum of 1 g CO2/km of emissions reduction with respect to the baseline vehicle, as defined in article 5 of Implementing Regulation (EU) No 725/2011..

Versions

  1. 2013-02-26

Cited by