Address https://gelex.eu/eli/EU/regulation/2013/626@2013-06-27/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
3. ANNEX
4. ANNEX I Products referred to in point (1) of Article 1
5. ANNEX II Products referred to in point (2) of Article 1

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) It is in the interest of the Union to suspend totally the autonomous Common Customs Tariff duties on 80 new products which are currently not listed in the Annex to Council Regulation (EU) No 1344/2011. Those products should therefore be inserted in that Annex.

(2) It is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties for 15 of the products which are currently listed in the Annex to Regulation (EU) No 1344/2011. Accordingly, those products should be deleted from that Annex.

(3) It is necessary to modify the product description of 22 suspensions in the Annex to Regulation (EU) No 1344/2011 in order to take account of technical product developments and economic trends on the market as well as linguistic adaptations. Moreover, TARIC codes for eight products should be changed. In addition, for three products multiple classification is considered necessary whereas for 12 products double classification is no longer necessary.

(4) Those suspensions for which technical modifications are necessary should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1344/2011 and should be reinserted in that list with new product descriptions, or new CN or TARIC codes.

(5) For three products it is in the interest of the Union to amend the date for their mandatory review in accordance with Article 2(2) and (3) of Regulation (EU) No 1344/2011. The reviewed suspensions should therefore be deleted from the list of suspensions in the Annex to Regulation (EU) No 1344/2011 and reinserted in that list with new time limits for a mandatory review.

(6) In the interest of clarity, the modified entries should be marked with an asterisk in the lists of inserted and deleted suspensions set out in Annex I and Annex II to this Regulation.

(7) In view of their temporary nature, the suspensions listed in Annex I should be reviewed systematically, at the latest five years after their application or renewal. Moreover, closure of certain suspensions should be warranted at any time, as a result of a proposal of the Commission on the basis of a review carried out on the initiative of the Commission or at the request of one or more Member States, if it is no longer in the Union’s interest to maintain the suspensions, or due to technical product developments, changed circumstances or economic trends on the market.

(8) Since it is necessary that the suspensions laid down in this Regulation take effect from 1 July 2013, this Regulation should apply from that date and should enter into force immediately upon its publication in the Official Journal of the European Union.

(9) Regulation (EU) No 1344/2011 should therefore be amended accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1344/2011 is hereby amended as follows:

(1) the rows for the products listed in Annex I to this Regulation are inserted;

(2) the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 July 2013.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 27 June 2013. For the Council The President E. Gilmore

ANNEX

ANNEX I Products referred to in point (1) of Article 1

CN code TARIC Description Rate of autonomous duty Date foreseen for mandatory review ex20079950 81 Acerola puree concentrate: for use in the manufacture of products of food and drink industry 9 % 31.12.2017 ex20079950 91 ex20079950 82 Acidified banana puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 11,5 % 31.12.2017 ex20079950 92 ex20079950 83 Mango puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 6 % 31.12.2017 ex20079950 93 ex20079993 10 ex20079950 84 Papaya puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 7,8 % 31.12.2017 ex20079950 94 ex20079950 85 Guava puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 6 % 31.12.2017 ex20079950 95 ex28053090 40 Rare earth metals, scandium and yttrium of a purity by weight of 95 % or more 0 % 31.12.2015 ex28053090 50 ex28053090 60 ex28053090 70 ex28053090 75 ex28053090 79 ex28111980 30 Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry 0 % 31.12.2017 ex28181091 10 Sintered corundum with micro crystalline structure, containing by weight: with less than 50 % of the total weight having a particle size of more than 10 mm 0 % 31.12.2015 ex29033990 25 2,3,3,3-Tetrafluoroprop-1-ene (CAS RN 754-12-1) 0 % 31.12.2017 ex29038990 50 Chlorocyclopentane (CAS RN 930-28-9) 0 % 31.12.2017 ex29053995 40 Decane-1,10-diol (CAS RN 112-47-0) 0 % 31.12.2017 ex29062900 30 2-Phenylethanol (CAS RN 60-12-8) 0 % 31.12.2017 ex29072300 10 4,4’-Isopropylidenediphenol (CAS RN 80-05-7) 0 % 31.12.2017 ex29072900 55 Biphenyl-2,2’-diol (CAS RN 1806-29-7) 0 % 31.12.2017 ex29122900 50 4-Isobutylbenzaldehyde (CAS RN 40150-98-9) 0 % 31.12.2017 ex29145000 45 3,4-Dihydroxybenzophenone (CAS RN 10425-11-3) 0 % 31.12.2017 ex29147000 20 2,4-Difluorobenzophenone (CAS RN 342-25-6) 0 % 31.12.2017 ex29153900 20 Isopentyl acetate (CAS RN 123-92-2) 0 % 31.12.2017 ex29156019 10 Ethyl butyrate (CAS RN 105-54-4) 0 % 31.12.2017 ex29159070 30 3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) 0 % 31.12.2017 ex29161200 70 2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3) 0 % 31.12.2017 ex29171390 10 Dimethyl sebacate (CAS RN 106-79-6) 0 % 31.12.2017 ex29182900 35 Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9) 0 % 31.12.2017 ex29183000 50 Ethyl acetoacetate (CAS RN 141-97-9) 0 % 31.12.2017 ex29189990 15 Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8) 0 % 31.12.2017 ex29189990 40 trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 537-98-4) 0 % 31.12.2013 ex29209010 60 2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) 0 % 31.12.2017 ex29213099 40 Cyclopropylamin (CAS RN 765-30-0) 0 % 31.12.2017 ex29221985 20 2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9) 0 % 31.12.2017 ex29221985 25 Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2) 0 % 31.12.2017 ex29291000 20 Butyl isocyanate (CAS RN 111-36-4) 0 % 31.12.2017 ex29319090 35 (Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) 0 % 31.12.2017 ex29329900 25 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) 0 % 31.12.2017 ex29331990 85 Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioat (CAS RN 473799-16-5) 0 % 31.12.2017 ex29332990 80 Imazalil (ISO) (CAS RN 35554-44-0) 0 % 31.12.2017 ex29333999 57 Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) 0 % 31.12.2017 ex29334910 30 Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6) 0 % 31.12.2017 ex29339980 43 2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7) 0 % 31.12.2017 ex29339980 47 Paclobutrazol (ISO) (CAS RN 76738-62-0) 0 % 31.12.2017 ex29349990 37 4-Propan-2-ylmorpholine (CAS RN 1004-14-4) 0 % 31.12.2017 ex32041100 20 Dye C.I. Disperse Yellow 241 (CAS RN 83249-52-9), with a purity of 97 % or more as determined by high pressure liquid chromatography 0 % 31.12.2015 ex32041100 80 Dye preparation, non-ionogenic, containing: 0 % 31.12.2017 ex32041200 20 Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0) 0 % 31.12.2017 ex32041200 30 Acid dye preparation, anionic, containing: 0 % 31.12.2017 ex32041300 30 Dye C.I. Basic Blue 7 (CAS RN 2390-60-5) 0 % 31.12.2017 ex32041300 40 Dye C.I. Basic Violet 1 (CAS RN 603-47-4)/(CAS RN 8004-87-3) 0 % 31.12.2017 ex32041700 25 Dye C.I. Pigment Yellow 14 (CAS RN 5468-75-7) 0 % 31.12.2016 ex32041700 60 Dye C.I. Pigment Red 53:1 (CAS RN 5160-02-1) 0 % 31.12.2016 ex32041700 70 Dye C.I. Pigment Yellow 13 (CAS RN 5102-83-0) 0 % 31.12.2016 ex32041700 75 Dye C.I. Pigment Orange 5 (CAS RN 3468-63-1) 0 % 31.12.2017 ex32041900 73 Dye C.I. Solvent Blue 104 (CAS RN 116-75-6) with a purity of 97 % or more determined by high pressure liquid chromatography 0 % 31.12.2015 ex32074085 40 Glass flakes (CAS RN 65997-17-3): 0 % 31.12.2017 ex32151900 20 Ink: used to imprint electrodes 0 % 31.12.2017 ex37079020 50 Dry ink powder or toner blend, consisting of: for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers 0 % 31.12.2017 ex38029000 11 Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products 0 % 31.12.2017 ex38123080 75 N,N’-Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) 0 % 31.12.2017 ex38123080 80 UV-stabiliser, consisting of: 0 % 31.12.2017 ex38123080 85 Mixture containing by weight: 0 % 31.12.2016 ex38249097 08 Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0) 0 % 31.12.2014 ex38249097 18 Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 515136-48-8) 0 % 31.12.2013 ex38249097 47 Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: 0 % 31.12.2017 ex38249097 49 Preparation containing: in which the gas formation from C,C’-azodi(formamide) occurs at 135 °C 0 % 31.12.2017 ex38249097 51 Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6) 0 % 31.12.2017 ex38249097 87 Paste containing by weight: 0 % 31.12.2017 ex38249097 93 Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde (CAS RN 487-68-3) in acetone 0 % 31.12.2013 ex38249097 94 Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges 0 % 31.12.2013 ex39053000 10 Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors 0 % 31.12.2017 ex39059100 20 Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 13 % of the monomer unit ethylene 0 % 31.12.2017 ex39069090 27 Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate 0 % 31.12.2017 ex39072020 20 Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1) 0 % 31.12.2017 ex39072020 30 Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone 0 % 31.12.2013 ex39072020 40 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100) 0 % 31.12.2013 ex39074000 10 Polycarbonate pellets: 0 % 31.12.2016 ex39079990 30 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) 0 % 31.12.2015 ex39139000 20 ex39095090 10 UV curable water soluble liquid photopolymer consisting of a mixture by weight of 0 % 31.12.2014 ex39191080 47 Polyester, polyurethane or polycarbonate foil: of a kind used for the protection of the surface of products of headings 8521 and 8528 0 % 31.12.2017 ex39199000 32 ex39191080 53 Polyethylene foil: of a kind used for the protection of the surface of products of headings 8521 and 8528 0 % 31.12.2017 ex39199000 34 ex39201028 93 ex39201089 50 ex39199000 36 Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) 0 % 31.12.2017 ex39204910 95 ex39199000 38 Self-adhesive film composed of: 0 % 31.12.2017 ex39199000 40 Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film: 0 % 31.12.2017 ex39199000 42 Self-adhesive film composed of: 0 % 31.12.2017 ex39199000 44 Printed laminated sheet 0 % 31.12.2017 ex39219060 95 ex39202080 95 Polypropylene sheet, put up in rolls, with: for use in the manufacture of insulators used in the electronics and electrical industries 0 % 31.12.2017 ex39206219 02 Co-extruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black 0 % 31.12.2013 ex39206219 08 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either: 0 % 31.12.2013 ex39206219 12 Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material 0 % 31.12.2013 ex39206219 18 Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material 0 % 31.12.2013 ex39206219 22 Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not more than 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm 0 % 31.12.2013 ex39206219 25 Film of poly(ethylene terephthalate) of a thickness of 186 μm or more but not more than 191 μm coated on one side with an acrylic layer in a matrix pattern 0 % 31.12.2014 ex39206219 38 Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm 0 % 31.12.2013 ex39206219 48 Sheets or rolls of poly(ethylene terephthalate): 0 % 31.12.2015 ex39206219 52 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method) 0 % 31.12.2013 ex39206219 55 Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45° and 18 measured at an angle of 60° using a gloss meter (as determined by the ISO 2813:2000 method) and a width of 1600 mm or more 0 % 31.12.2013 ex39206219 58 Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not more than 253 μm, coated on both sides with an antistatic layer 0 % 31.12.2013 ex39206219 76 Transparent poly(ethylene terephthalate) film: 0 % 31.12.2013 ex39206219 81 Poly(ethylene terephthalate) film: 0 % 31.12.2017 ex39209200 30 Polyamide film: 0 % 31.12.2013 ex39209928 55 Thermoplastic polyurethane film extruded, with: of a kind used in the production of laminated safety glass 0 % 31.12.2017 ex39211310 20 Rolls of open-cell polyurethane foam: 0 % 31.12.2017 ex39219055 20 Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring: for use in the manufacture of printed circuit boards 0 % 31.12.2013 ex39269097 21 Television pedestal stands with or without bracket for fixation to and stabilisation of television cabinet case/body 0 % 31.12.2016 ex70200010 10 ex73269098 40 ex76169990 77 ex41044119 10 Buffalo leather, split, chrome tanned synthetic retanned (crust), dry 0 % 31.12.2017 ex70091000 10 Mirror-glass for rear-view mirrors: 0 % 31.12.2017 ex70191200 05 Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm) 0 % 31.12.2017 ex70191200 25 ex76071190 30 Laminated aluminium foil with: 0 % 31.12.2013 ex76072090 20 Lubricating entry sheet of a total thickness of not more than 350 μm, comprising of: 0 % 31.12.2015 ex76169990 75 Parts in the shape of a rectangular frame: of a kind used in the manufacture of TV sets 0 % 31.12.2017 ex81059000 10 Bars or wires made of cobalt alloy containing, by weight: conforming to the material specifications AMS 5842, of a kind used in the aerospace industry 0 % 31.12.2017 ex83016000 10 Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements 0 % 31.12.2015 ex84139100 20 ex84199085 20 ex84389000 10 ex84689000 10 ex84769000 10 ex84799080 87 ex84819000 20 ex85030099 45 ex85159000 20 ex85319085 20 ex85369085 96 ex85439000 50 ex87089199 10 ex87089997 30 ex90319085 30 ex83052000 10 Staples: packed in a plastic cartridge for use in copiers and printers resulting in a staple of a width of 12 mm (± 1 mm) and a depth of 8 mm (± 1 mm) 0 % 31.12.2013 ex84312000 30 Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427 0 % 31.12.2017 ex85011099 60 DC motor for use in the manufacture of electric fryers 0 % 31.12.2017 ex85030099 40 Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501 0 % 31.12.2017 ex85044082 40 Printed circuit board equipped with a bridge rectifier circuit and other active and passive components 0 % 31.12.2017 ex85044082 50 Rectifier in a housing with 0 % 31.12.2017 ex85051100 35 Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications 0 % 31.12.2017 ex85076000 25 Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: 0 % 31.12.2017 ex85076000 35 Lithium-ion rechargeable batteries, with: 0 % 31.12.2017 ex85076000 50 Modules for the assembly of batteries of ion lithium electric accumulators with: 0 % 31.12.2017 ex85169000 70 Inner pot for use in the manufacture of an electric fryer 0 % 31.12.2017 ex85229080 15 Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521 0 % 31.12.2017 ex85258019 45 Camera module with a resolution of 1280 * 720 P HD, with two microphones, for use in the manufacture of products of heading 8528 0 % 31.12.2017 ex85269120 80 Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with: for the use in the manufacture of vehicles in Chapter 87 0 % 31.12.2015 ex85272900 10 ex85299092 70 Rectangular fastening and covering frame: of a kind used for the production of TV sets 0 % 31.12.2017 ex85299092 80 Printed circuit board for backlight: to be incorporated in goods of heading 8528 0 % 31.12.2013 ex94054039 40 ex85366990 51 SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528 0 % 31.12.2017 ex85402080 91 Photomultiplier 0 % 31.12.2016 ex85444290 30 PET insulated electric conductor with: for use in the manufacture of products falling within headings 8521 and 8528 0 % 31.12.2017 ex90019000 25 Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % 31.12.2017 ex90029000 40 Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % 31.12.2017

of the genus Malpighia spp.,

with a sugar content by weight of 13 % or more but not more than 30 %

of the genus Musa cavendish,

with a sugar content by weight of 13 % or more but not more than 30 %

of the genus Mangifera spp.,

with a sugar content by weight of not more than 30 %

of the genus Carica spp.,

with a sugar content by weight of 13 % or more but not more than 30 %

of the genus Psidium spp.,

with a sugar content by weight of 13 % or more but not more than 30 %

94 % or more, but not more than 98,5 % of α-Al2O3,

2 % (± 1,5 %) of magnesium spinel,

1 % (± 0,6 %) of yttrium oxide and

2 % (± 1,2 %) of lanthanum oxide and neodymium oxide

N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0)

N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) and

N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)

lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1),

C.I. Acid Green 25 (CAS RN 4403-90-1) and

C.I. Acid Blue 80 (CAS RN 4474-24-2)

of a thickness of 0,3 μm or more but not more than 10 μm, and

coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)

consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),

with a total solid content by weight of 55 % or more, but not more than 57 %, and

with a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,

styrene acrylate/butadiene copolymer

either carbon black or an organic pigment

whether or not containing polyolefin or amorphous silica

a hindered amine: N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and

either an o-hydroxyphenyl triazine UV light absorber or

a chemically modified phenolic compound

70 % or more but not more than 80 % of bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7) and

20 % or more but not more than 30 % of methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate (CAS RN 82919-37-7)

0,1 % or more but not more than 1 % of platinum, and

0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)

C,C’-azodi(formamide) (CAS RN 123-77-3),

magnesium oxide (CAS RN 1309-48-4) and

zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)

75 % or more, but not more than 85 % of copper,

inorganic oxides,

ethyl cellulose, and

a solvent

containing 7 % or more but not more than 15 % by weight of non-halogen flame retardant, and

with a specific gravity of 1,20 (± 0,01)

60 % or more of two-functional acrylated polyurethane oligomers and

30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and

10 % (± 3 %) of hydroxyl functionalised mono-functional (metha) acrylates

with pressure sensitive silicone polymer adhesive,

of a total thickness of not more than 0,7 mm,

of a total width of 1 cm or more, but not more than 1 m,

whether or not in rolls

with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces,

of a total thickness of 0,025 mm or more, but not more than 0,7 mm, and

of a total width of 6 cm or more, but not more than 1 m,

whether or not in rolls,

whether or not with a pressure or heat sensitive adhesive layer

whether or not with a release film

with a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together

with a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83)

with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 g/m2) with pressure sensitive layer

a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide,

whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions,

not more than 6 % by weight of other additives,

a pressure sensitive adhesive; and

covered on one side with a release liner,

whether or not with a separate self-adhesive over laminate protective film,

of a total thickness of not more than 400 μm

containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or more

having on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2

coated on the other side with a pressure sensitive adhesive and a release liner

a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent,

a second layer containing a maleic anhydride copolymer,

a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,

a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,

a pressure sensitive adhesive; and

covered on one side with a release liner

whether or not with a separate self-adhesive over laminate protective film

of a total thickness of not more than 400 μm

with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride),

on one side covered with a layer of poly(vinyl fluoride),

whether or not with a pressure sensitive adhesive layer and a release film on the other side,

with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together,

with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), and

with a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer

flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94)

dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149)

tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882)

tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882)

density range of 0,988 gm/cm3 or more but not more than 1,035 gm/cm3 (as determined by ASTM D792)

moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570)

only dyed in the mass, or

dyed in the mass and metallised on one side

coated on both sides with a layer of epoxy acrylic resin,

of a total thickness of 37 μm (± 3 μm)

coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,

with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,

with a light transmission of more than 93 %,

with a haze value of not more than 1,3 %,

with a total thickness of 10 μm or more but not more than 350 μm,

with a width of 800 mm or more but not more than 1600 mm

of a thickness of not more than 20 μm,

coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

of a thickness of not more than 20 μm,

coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

not self-adhesive,

an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),

a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),

a total thickness of 0,38 mm or more, but not more than 7,6 mm,

a width of 99 cm or more, but not more than 305 cm,

with a thickness of 2,29 mm (± 0,25 mm),

surface-treated with a foraminous adhesion promoter, and

laminated to a polyester film and a layer of textile material

469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or

469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or

546,1 mm (± 2 mm) × 622,3 mm (± 2 mm

equipped with plastic backing plate,

having the ability to reflect variable intensities of ambient light,

whether or not equipped with a heating element, and

whether or not equipped with Blind Spot Module (BSM) display

99 % or more of aluminium,

a silica and water glass free hydrophilic coating,

a total thickness of not more than 0,120 mm,

a tensile strength of 100 N/mm2 or more (as determined by test method ASTM E8), and

an elongation at break of 1 % or more

a layer of aluminium foil of a thickness of 70 μm or more but not more than 150 μm,

a water soluble lubricant of a thickness of 20 μm or more but not more than 200 μm and solid at room temperature

of painted aluminium,

with a length of 1011 mm or more but not more than 1500 mm,

with a width of 622 mm or more but not more than 900 mm,

with a thickness of 0,6 mm (± 0,1 mm),

35 % (± 2 %) cobalt,

25 % (± 1 %) nickel,

19 % (± 1 %) chromium and

7 % (± 2 %) iron

of a length of 28 mm,

unbent,

with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loaded

with a power supply voltage of 100 V or more but not more than 240 V

with two output connectors

with two input connectors which are available and useable in parallel

able to switch between bright and dimmed operation mode

with an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or

with an input voltage of 230 V (+ 20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or

with an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode

with an input current reaching 80 % of its nominal value within 20 ms

with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions

with an maximum inrush current overshoot of not more than 250 % of the input current

with a period of the inrush current overshoot of not more than 100 ms

with an input current undershoot of not less than 50 % of the input current

with a period of the inrush current undershoot of not more than 20 ms

with a presettable output current

with an output current reaching 90 % of its nominal pre-set value within 50 ms

with an output current reaching zero within 30 ms after removal of the input voltage

with an defined failure status in case of no-load or too-high load (end-of-life function)

a rated power of not more than 250 W

an input voltage of 90 V or more, but not more than 305 V

a certified input frequency of 47 Hz or more, but not more than 440 Hz

a constant current output of 350 mA or more, but not more than 15 A

an inrush current of not more than 10 A

an operating temperature range of – 40 °C or more, but not more than + 85 °C,

suitable for driving of LED-illuminants

a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm)

a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)

a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm)

a weight of 45,9 kg or 46,3 kg

a rating of 75 Ah and

a nominal voltage of 60 V

a length of 1475 mm or more, but not more than 1515 mm,

a width of 1365 or more, but not more than 1375 mm,

a height of 260 mm or more, but not more than 270 mm,

a weight of 320 kg or more, but not more than 330 kg,

a nominal capacity of 18,4 Ah or more, but not more than 130 Ah,

put up in packs of 12 or 16 modules

a length of 298 mm or more, but not more than 408 mm,

a width of 33,5 mm or more, but not more than 209 mm,

a height of 138 mm or more, but not more than 228 mm,

a weight of 3,6 kg or more, but not more than 17 kg, and

a power of 458 kWh or more, but not more than 2158 kWh

containing side and central openings,

of annealed aluminium,

with a ceramic coating, heat resistant to more than 200 °C

a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner,

a hard disk drive supporting multiple maps,

a HD radio,

a voice recognition system,

a CD and DVD drive,

Bluetooth, MP3 and USB input connectivity,

a voltage of 10 V or more but not more than 16 V,

of an aluminium alloy containing silicon and magnesium,

with a length of 900 mm or more but not more than 1500 mm,

with a width of 600 mm or more but not more than 950 mm,

with LED diodes equipped with prisms,

whether or not with connector(s) fitted at one or both ends,

10 or 80 individual wires,

a length of 50 mm or more, but not more than 800 mm,

connector(s) and/or plug(s) fitted at one or both ends,

ANNEX II Products referred to in point (2) of Article 1

CN code TARIC ex20079950 40 ex20079950 50 ex20079950 60 ex20086019 30 ex20086039 30 ex20089948 20 ex20089948 93 ex20089949 50 ex28053090 40 ex28053090 50 ex28053090 60 ex28181091 10 ex29161995 30 ex29173995 10 ex29189990 40 ex29349990 12 ex32041100 10 ex32041100 20 ex32041700 25 ex32041700 45 ex32041700 55 ex32041700 60 ex32041700 70 ex32041900 72 ex32041900 73 ex38029000 11 ex38249097 08 ex38249097 31 ex38249097 70 ex38249097 72 ex38249097 73 ex38249097 75 ex39072020 11 ex39072020 12 ex39074000 10 ex39079990 30 ex39095090 10 ex39119099 75 ex39206219 01 ex39206219 03 ex39206219 07 ex39206219 09 ex39206219 11 ex39206219 13 ex39206219 17 ex39206219 19 ex39206219 21 ex39206219 23 ex39206219 24 ex39206219 26 ex39206219 37 ex39206219 39 ex39206219 47 ex39206219 49 ex39206219 51 ex39206219 53 ex39206219 54 ex39206219 56 ex39206219 57 ex39206219 59 ex39206219 75 ex39206219 77 ex39206219 81 ex39209200 30 ex39219055 20 ex70191200 05 ex70191200 25 ex73269098 40 ex76071190 30 ex76072090 20 ex81082000 20 ex81089050 40 ex81089050 80 ex83052000 10 ex85044082 40 ex85044082 50 ex85076000 50 ex85269120 80 ex85285980 10 ex85369085 96 ex85389099 94 ex85402080 91 ex85439000 50 ex87088099 10 ex94054039 30

Versions

1. 2013-06-27