Address https://gelex.eu/eli/EU/regulation/2015/982@2015-06-23/en

Contents

1. Preamble
2. 1. Article 1
3. Article 1
4. (1)
   1. Article 1
5. 1. Article 1
   2. Article 2
6. ANNEX
7. ANNEX
8. (1)
9. (2)

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) It is in the interest of the Union to suspend totally the autonomous Common Customs Tariff duties on 111 products that are not currently listed in Annex I to Council Regulation (EU) No 1387/2013. Those new products should, therefore, be inserted into that Annex.

(2) It is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties on 15 of the products that are currently listed in Annex I to Regulation (EU) No 1387/2013. Those products should, therefore, be deleted from that Annex.

(3) It is necessary to modify the product descriptions of 27 suspensions included in Annex I to Regulation (EU) No 1387/2013 in order to take account of technical product developments and economic trends in the market or to carry out linguistic adaptations. Moreover, following further scrutiny of the products specifications, CN codes for two additional products should be amended. The suspensions in respect of which modifications are necessary should be deleted from the list of suspensions in Annex I to Regulation (EU) No 1387/2013, and the modified suspensions should be inserted into that list.

(4) In the interest of clarity, the modified entries should be marked with an asterisk.

(5) In order to allow for appropriate statistical monitoring, Annex II to Regulation (EU) No 1387/2013 should be completed with supplementary units for some of the new products for which suspensions are granted. For reasons of consistency, the supplementary units assigned to the products deleted from Annex I to Regulation (EU) No 1387/2013 should also be deleted from Annex II to that Regulation.

(6) It should be clarified that any mixtures, preparations or products made up of different components containing products subject to autonomous tariff suspensions are not covered by Annex I to Regulation (EU) No 1387/2013.

(7) Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(8) Following specific administrative arrangements, the amendments pursuant to this Regulation have to take effect from 1 July 2015. This Regulation should apply from that date.

(9) However, in order to adequately ensure the benefit of the suspension with regard to the competitive capacity of the enterprises concerned by products:

with TARIC code 2930909921, the suspension relating to those products should apply from 1 January 2014;

with TARIC code 8507600087, the suspension relating to those products should apply from 1 July 2014;

with TARIC codes 8409990030, 8411990060 and 8411990070, the suspension relating to those products should apply from 1 January 2015,

HAS ADOPTED THIS REGULATION:

Article 1

Regulation (EU) No 1387/2013 is amended as follows:

(1) Article 1 is replaced by the following:

Article 1

(1)

Article 1

1. The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in Annex I are hereby suspended.

2. Paragraph 1 does not apply to any mixtures, preparations or products made up of different components containing products listed in Annex I..

Article 1

(2) Annexes I and II are amended as set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 July 2015. However, the suspension relating to products:

with TARIC code 2930909921 shall apply from 1 January 2014;

with TARIC code 8507600087 shall apply from 1 July 2014;

with TARIC codes 8409990030, 8411990060 and 8411990070 shall apply from 1 January 2015.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 23 June 2015. For the Council The President E. Rinkēvičs

ANNEX

ANNEX

The Annexes to Regulation (EU) No 1387/2013 are amended as follows:

(1) Annex I is amended as follows:

(1)

(a)(*) the note between the title and the table is replaced by the following note: Suspension relating to a product in this Annex with regard to which the CN or TARIC code or the product description or the mandatory review date were amended by Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 192, 1.7.2014, p. 9), by Council Regulation (EU) No 1341/2014 of 15 December 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products or by Council Regulation (EU) 2015/982 of 23 June 2015 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 159, 25.6.2015, p. 5);

(b) the following rows for the products are inserted following the order of the CN codes indicated in the first column of the table: CN code TARIC Description Rate of autonomous duty Date foreseen for mandatory review *ex20098973 ex20098973 11 13 Passion fruit juice and passion fruit juice concentrate, whether or not frozen: for use in the manufacture of products of the food or drink industry 0 % 31.12.2019 *ex20098999 94 Coconut water: 0 % 31.12.2016 *ex22072000 ex22072000 ex38200000 20 80 20 Feedstock consisting of by weight: for use in the manufacture of screenwash concentrate and other de-icing preparations 0 % 31.12.2018 ex27101999 20 Catalytic de-waxed base oil, produced by synthesis from gaseous hydrocarbons followed by a heavy paraffin conversion process (HPC), containing: 0 % 31.12.2019 *ex28181091 20 Sintered corundum with a microcrystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum and neodymium, with a content by weight (calculated as oxides) of: and: with less than 50 % of the total weight having a particle size of more than 10 mm 0 % 31.12.2015 ex28276000 10 Sodium iodide (CAS RN 7681-82-5) 0 % 31.12.2019 ex28417000 30 Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2) 0 % 31.12.2019 ex29033990 35 Pentafluoroethane (CAS RN 354-33-6) 0 % 31.12.2019 ex29037919 10 Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0) 0 % 31.12.2019 ex29049095 80 1-Chloro-2-nitrobenzene (CAS RN 88-73-3) 0 % 31.12.2019 ex29052200 10 Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-linalool (CAS RN 126-91-0) 0 % 31.12.2019 ex29071200 30 p-Cresol (CAS RN 106-44-5) 0 % 31.12.2019 ex29072900 25 4-Hydroxybenzyl alcohol (CAS RN 623-05-2) 0 % 31.12.2019 ex29072900 65 2,2′-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8) 0 % 31.12.2019 ex29096000 30 3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons 0 % 31.12.2019 ex29146990 50 Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8) 0 % 31.12.2019 ex29163990 18 2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9) 0 % 31.12.2019 ex29163990 23 (2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6) 0 % 31.12.2019 ex29173995 50 1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4) 0 % 31.12.2019 ex29173995 60 Perylene-3,4:9,10-tetracarboxylic dianhydride (CAS RN 128-69-8) 0 % 31.12.2019 ex29182900 70 3,5-Diiodosalicylic acid (CAS RN 133-91-5) 0 % 31.12.2019 ex29183000 70 2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1) 0 % 31.12.2019 ex29189990 55 Stearyl glycyrrhetinate (CAS RN 13832-70-7) 0 % 31.12.2019 ex29189990 65 Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0) 0 % 31.12.2019 ex29189990 75 3,4-Dimethoxybenzoic acid (CAS RN 93-07-2) 0 % 31.12.2019 ex29214200 40 Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5) 0 % 31.12.2019 ex29224985 55 (E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7) 0 % 31.12.2019 ex29239000 20 Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7) 0 % 31.12.2019 ex29241900 35 Acetamide (CAS RN 60-35-5) 0 % 31.12.2019 ex29242998 23 Benalaxyl-M (ISO) (CAS RN 98243-83-5) 0 % 31.12.2019 ex29242998 33 N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) 0 % 31.12.2019 ex29242998 73 Napropamide (ISO) (CAS RN 15299-99-7) 0 % 31.12.2019 *ex29270000 35 C,C′-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam 0 % 31.12.2019 ex29280090 13 Cymoxanil (ISO) (CAS RN 57966-95-7) 0 % 31.12.2019 ex29280090 18 Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more 0 % 31.12.2019 ex29309099 16 3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1) 0 % 31.12.2019 ex29309099 21 [2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) 0 % 31.12.2016 ex29309099 27 2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0) 0 % 31.12.2019 ex29309099 33 2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonic acid (CAS RN 42986-22-1) 0 % 31.12.2019 ex29333999 11 2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride (CAS RN 153259-31-5) 0 % 31.12.2019 ex29333999 21 Boscalid (ISO) (CAS RN 188425-85-6) 0 % 31.12.2019 ex29333999 31 2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride (CAS RN 127337-60-4) 0 % 31.12.2019 ex29335995 10 6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5) 0 % 31.12.2019 ex29336980 75 Metamitron (ISO) (CAS RN 41394-05-2) 0 % 31.12.2019 ex29339980 11 Fenbuconazole (ISO) (CAS RN 114369-43-6) 0 % 31.12.2019 ex29339980 12 Myclobutanil (ISO) (CAS RN 88671-89-0) 0 % 31.12.2019 ex29339980 19 2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0) 0 % 31.12.2019 ex29349990 10 Fluralaner (INN) (CAS RN 864731-61-3) 0 % 31.12.2019 ex29349990 16 Difenoconazole (ISO) (CAS RN 119446-68-3) 0 % 31.12.2019 ex29349990 19 2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3) 0 % 31.12.2019 ex29350090 10 Florasulam (ISO) (CAS RN 145701-23-1) 0 % 31.12.2019 ex32041200 60 Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight 0 % 31.12.2019 ex32041300 50 Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight 0 % 31.12.2019 ex32041300 60 Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight 0 % 31.12.2019 ex32041400 10 Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight 0 % 31.12.2019 ex32041400 20 Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight 0 % 31.12.2019 ex32041400 30 C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight 0 % 31.12.2019 ex32041700 45 Colourant C.I. Pigment Yellow 174 (CAS RN 4118-16-5), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight 0 % 31.12.2018 ex32041700 67 Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight. 0 % 31.12.2018 ex32049000 10 Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight 0 % 31.12.2019 ex32121000 ex76072090 10 30 Metallised film: 0 % 31.12.2019 ex38089420 30 Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing: 0 % 31.12.2019 ex38112100 23 Additives containing: having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils 0 % 31.12.2019 *ex38112100 53 Additives containing: having a total base number (TNB) of 280 or more but not more than 420, for use in the manufacture of lubricating oils 0 % 31.12.2019 *ex38112100 73 Additives containing: having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures for lubricating oils 0 % 31.12.2018 ex38123029 10 4,4′-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6) 0 % 31.12.2019 ex38249092 82 T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene 0 % 31.12.2019 *ex38249092 83 Preparation consisting of two or more of the following glycols: 0 % 31.12.2017 *ex38249093 46 Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate (CAS RN 4681-22-5) containing by weight: 0 % 31.12.2015 *ex39011010 ex39019090 20 50 High-flow linear low-density polyethylene-1-butene (LLDPE) (CAS RN 25087-34-7) in form of powder, with: 0 % 31.12.2019 ex39011010 30 Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with: 0 % 31.12.2018 *ex39019090 60 Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with: 0 % 31.12.2018 *ex39031900 40 Crystalline polystyrene with: whether or not containing additives and filling material 0 % 31.12.2016 ex39039090 45 Preparation, in form of powder, containing by weight: 0 % 31.12.2019 ex39039090 55 Preparation, in form of an aqueous suspension, containing by weight: 0 % 31.12.2019 ex39089000 70 Copolymer containing: whether or not containing isophthalic acid (CAS RN 121-91-5) 0 % 31.12.2019 ex39119019 60 Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6) 0 % 31.12.2019 ex39119019 70 Preparation containing: in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight 0 % 31.12.2019 *ex39122019 10 Nitrocellulose (CAS RN 9004-70-0) 0 % 31.12.2016 *ex39191080 ex39199000 ex39206100 57 30 30 Reflecting sheet: 0 % 31.12.2018 *ex39191080 ex39199000 67 46 Self-adhesive reflecting sheet whether or not in segmented pieces: 0 % 31.12.2018 *ex39199000 48 Transparent poly(vinyl chloride) film: 0 % 31.12.2019 ex39201028 30 Printed embossed film: 0 % 31.12.2019 *ex39206219 60 Poly(ethylene terephtalate) film: 0 % 31.12.2017 ex39206900 50 Monolayer, biaxially oriented film: 0 % 31.12.2019 ex39206900 60 Monolayer, transverse oriented, shrink film: 0 % 31.12.2019 ex39207910 10 Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm 0 % 31.12.2019 ex39209928 65 Matt, thermoplastic polyurethane foil in rolls with: 0 % 31.12.2019 ex39209928 75 Thermoplastic polyurethane foil in rolls with: 0 % 31.12.2019 ex39219060 30 Heat-, infra- and UV insulating poly(vinyl butyral) film: 0 % 31.12.2019 ex68042100 10 Discs: 0 % 31.12.2019 ex74091100 ex74091900 ex74101100 10 10 20 Refined copper foil and strips of a thickness of not more than 400 μm 0 % 31.12.2019 *ex76061292 ex76071190 30 50 Aluminium and magnesium alloy strip or foil: containing by weight: 0 % 31.12.2017 *ex76071190 60 Plain aluminium foil with the following parameters: of a kind used for high voltage etching 0 % 31.12.2016 ex76169910 30 Aluminium engine bracket, with dimensions of: equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: of a kind used in the production of suspensions systems for engines in motor vehicles 0 % 31.12.2019 *ex81089030 50 Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 and 4967 0 % 31.12.2015 ex81089050 80 Plates, sheets, strips and foil of non-alloyed titanium: 0 % 31.12.2019 ex81089050 85 Strip or foil of non-alloyed titanium: of a kind used in the manufacture of welded tubes for nuclear power plant condensers 0 % 31.12.2019 ex84099900 ex84119900 30 70 Spiral-shaped gas turbine turbocharger component: 0 % 31.12.2018 ex84119900 60 Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: 0 % 31.12.2017 ex84798997 70 Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy 0 % 31.12.2019 ex84798997 80 Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries 0 % 31.12.2019 *ex84833038 40 Cylindrical bearing housing: 0 % 31.12.2017 ex85013200 ex85013300 60 15 Traction motor, with: for use in the manufacture of electric vehicles 0 % 31.12.2019 ex85044088 30 DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles 0 % 31.12.2019 ex85044090 80 Power converter containing: for use in the manufacture of electric vehicles 0 % 31.12.2019 ex85059020 30 Coil for an electromagnetic valve, with: in a cylindrical metal housing 0 % 31.12.2019 *ex85071020 30 Lead-acid accumulators or modules, of a kind used for starting piston engines, with: for use in the manufacture of articles of CN code 8711 0 % 31.12.2018 *ex85076000 85 Rectangular modules for incorporation in lithium-ion rechargeable batteries: 0 % 31.12.2015 ex85076000 87 Lithium-ion rechargeable batteries, with: put up in packs of 12 or 16 modules 0 % 31.12.2017 *ex85113000 30 Igniter integrated coil assembly with: 0 % 31.12.2019 ex85122000 10 Fog lamps with galvanised inner surface, containing: for use in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex85122000 20 Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex85123090 10 Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising: of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex85129090 10 Ultrasonic parking sensor with: of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex85142080 ex85165000 ex85166080 10 10 10 Cavity assembly comprising at least: with or without a magnetron of a microwave output power of not more than 900 W. for use in the manufacture of built-in products of CN codes 85142080, 85165000 and 85166080 0 % 31.12.2019 ex85169000 80 Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of CN codes 85142080, 85165000 and 85166080 0 % 31.12.2019 ex85189000 80 Integrated car loudspeaker housing, consisting of: 0 % 31.12.2019 *ex85258019 60 Image scanning cameras, using: 0 % 31.12.2019 *ex85279199 ex85299065 20 85 Assembly consisting of at least: for use in the manufacture of consumer electronic products 0 % 31.12.2019 ex85291080 70 Ceramic filters: of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment 0 % 31.12.2019 ex85299065 80 Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 8527 0 % 31.12.2019 *ex85299092 ex85489090 15 60 LCD modules: 0 % 31.12.2018 ex85371099 40 Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of: of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex85371099 50 Electronic control unit BCM (Body Control Module) comprising: of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex85371099 60 Electronic assembly consisting of: for use in the manufacture of built-in products of CN codes 85142080, 85165000 and 85166080 0 % 31.12.2019 ex85444991 10 Insulated copper electrical wires: for use in the manufacture of automotive cable harnesses 0 % 31.12.2019 *ex85489090 65 LCD modules: 0 % 31.12.2018 ex87083010 10 Brake unit assembly comprising for use in the manufacture of vehicles 0 % 31.12.2019 ex87083091 20 Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex87083091 30 Body of disc type brake in BIR (Ball in Ramp) or EPB (Electronic Parking Brake) version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex87089135 10 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex87089435 20 Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex90021100 80 Lens assembly with: for use in the manufacture of CMOS automotive cameras 0 % 31.12.2019 ex90291000 30 Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex90292031 ex90299000 10 20 Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least: communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex90318034 50 Programmable dual linear Hall sensor: for use as a means for measuring angles, positions and currents in cars 0 % 31.12.2019 ex90318038 50 Gyroscopic sensor for measuring lateral acceleration of the vehicle vertical axis comprising: of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex90318038 60 Congestion sensor, printed circuit board and connector, moulded together in plastic, for monitoring congestion G and providing the values for further evaluation of triggering the airbags, of a kind used in the manufacture of goods of Chapter 87 0 % 31.12.2019 ex90318098 30 Functional Test Machine for calibrating and image quality testing lenses in automotive cameras 0 % 31.12.2019

with a Brix value of 13,7 or more but not more than 55,

of a value of more than EUR 30 per 100 kg net weight,

in immediate packings of a content of 50 litres or more, and

with added sugar

unfermented,

not containing added spirit or sugar, and

in immediate packing of a content of 50 litres or more

88 % or more but not more than 92 % of ethanol,

2,2 % or more but not more than 2,7 % of monoethylene glycol,

1,0 % or more but not more than 1,3 % of methylethylketone,

0,36 % or more but not more than 0,40 % of anionic surfactant (ca. 30 % active),

0,0293 % or more but not more than 0,0396 % of methyl isopropylketone,

0,0195 % or more but not more than 0,0264 % of 5 methyl-3-heptanone,

10 ppm or more but not more than 12 ppm of denatonium benzoate (Bitrex),

not more than 0,01 % of perfumes,

6,5 % or more but not more than 8,0 % of water,

not more than 1 mg/kg of sulphur

more than 99 % by weight of saturated hydrocarbons

more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and

a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or

a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more

94 % or more, but less than 98,5 % of aluminium oxide,

2 % (± 1,5 %) of magnesium oxide,

1 % (± 0,6 %) of yttrium oxide,

either 2 % (± 1,2 %) of lanthanum oxide or

2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,

consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,

with an optical density of each aluminium layer of not more than 3.0,

with each aluminium layer separated by a resin layer,

on a carrier film of PET, and

on rolls of up to 50000 metres in length

1,3-dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),

1,3-dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),

1-bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and

1-chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)

polyisobutene succinimide derived from reaction of polyethylenepropylamide with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

more than 31,9 % but not more than 43,3 % by weight of mineral oils, and

not more than 0,05 % by weight chlorine,

overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and

by weight more than 40 % but not more than 60 % of mineral oil,

borated succinimide compounds (CAS RN 134758-95-5), and

mineral oils,

dipropylene glycol,

tripropylene glycol,

tetrapropylene glycol or

pentapropylene glycol

not more than 20 % of disodium sulphate, and

not more than 5 % of sodium chloride

a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min,

a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3, and

a vicat softening temperature of min. 94 °C

not more than 5 % by weight of comonomer,

a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and

a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3

more than 5 %, but not more than 8 % by weight of comonomer,

a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min, and

a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3

a melting point of 268 °C or more but not more than 272 °C, and

a setting point of 232 °C or more but not more than 247 °C,

86 % or more but not more than 90 % of styrene-acrylic-copolymer and

9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)

25 % or more but not more than 26 % of styrene-acrylic-copolymer and

5 % or more but not more than 6 % of glycol

1,3-benzenedimethanamine (CAS RN 1477-55-0) and

adipic acid (CAS RN 124-04-9),

cyanic acid, C,C′-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), and

1,3-bis(4-cyanophenyl)propane (CAS RN 1156-51-0),

of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern

covered on one or both sides with one or more layers of plastic or metallisation, and

whether or not covered on one side with a self-adhesive layer and a release sheet

showing a regular pattern,

with or without an application tape layer,

consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,

whether or not containing an additional layer of polyester and an adhesive with a final release sheet

coated on one side with an acrylic UV-sensitive adhesive with an adhesive strength of 70 N/m or more, which is reduced upon irradiation,

with a polyester liner

with a total thickness without release liner of 78 μm or more

of polymers of ethylene

having a gravity of 0,94 g/cm3 or more

of a thickness of 0,019 mm ± 0,003 mm

with permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more

of a thickness of not more than 20 μm,

coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2 μm

composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,

having a thickness of 20 μm or more but not more than 120 μm

biodegradable and compostable (as determined by the method EN 13432)

composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),

having a thickness of 45 μm or more but not more than 50 μm,

biodegradable and compostable (as determined by the method EN 13432)

a width of 1640 mm (± 10 mm),

a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),

a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),

a thickness of more than 365 μm but not more than 760 μm,

a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),

an elongation to break of 470 % (as determined by the method: EN ISO 527)

a width of more than 900 mm but not more than 1016 mm,

a matt finish,

a thickness of 0,43 mm (± 0,03 mm),

an elongation to break of 420 % or more but not more than 520 %,

a tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527)

a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]),

wrinkle inside (waves) of 6,35 mm,

a flatness of 0,025 mm

laminated with a metal layer with a thickness of 0,05 mm (± 0,01 mm),

containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticizer,

with a light transmission of 70 % or more (as determined by the ISO 9050 standard),

with an UV transmission of 1 % or less (as determined by the ISO 9050 standard),

with a total thickness of 0,43 mm (± 0,043 mm)

of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,

having a self-sharpening effect by constant release of the diamonds,

suitable for abrasive cutting of wafers,

whether or not containing a hole in the centre,

whether or not on a support

in rolls,

of a thickness of 0,14 mm or more but not more than 0,40 mm,

a width of 12,5 mm or more but not more than 359 mm,

a tensile strength of 285 N/mm2 or more, and

an elongation at break of 1 % or more, and

93,3 % or more of aluminium,

0,8 % or more but not more than 5 % of magnesium, and

not more than 1,8 % of other elements

an aluminium content of 99,98 % or more,

a thickness of 0,070 mm or more but not more than 0,125 mm,

with a cubic texture,

height of more than 10 mm but not more than 200 mm,

width of more than 10 mm but not more than 200 mm,

length of more than 10 mm but not more than 200 mm,

internal porosity not more than 1 mm,

outer porosity not more than 2 mm,

Rockwell hardness HRB 10 or more,

of a width of more than 750 mm,

of a thickness of not more than 3 mm

containing more than 0,07 % by weight of oxygen (O2),

of a thickness of 0,4 mm or more but not more than 2,5 mm,

conforming to the Vickers hardness HV1 standard of not more than 170,

with a heat-resistance of not more than 1050 °C,

with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm,

whether or not with an engine exhaust manifold

of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,

with a heat-resistance of not more than 1100 °C,

with a diameter of 30 mm or more, but not more than 100 mm,

with a height of 20 mm or more, but not more than 70 mm

of precision-cast grey cast iron complying with standard DIN EN 1561,

with oil chambers,

without bearings,

with a diameter of 50 mm or more, but not more than 250 mm,

with a height of 40 mm or more, but not more than 150 mm,

whether or not with water chambers and connectors

a torque output of 200 Nm or more but not more than 300 Nm,

a power output of 50 kW or more but not more than 100 kW,

a speed of not more than 12500 rpm,

a DC to DC converter,

a charger of a capacity of not more than 7 kW,

switching functions,

a plunger,

a diameter of 12,9 mm (± 0,1),

a height without plunger of 20,5 mm (± 0,1),

an electric cable with connector, and

a nominal capacity of not more 32 Ah,

a length of not more than 205 mm,

a width of not more than 130 mm and

a height of not more than 190 mm,

of a length of 312 mm or more, but not more than 350 mm,

of a width of 79,8 mm or more, but not more than 225 mm,

of a height of 35 mm or more, but not more than 168 mm,

of a weight of 3,95 kg or more, but not more than 8,56 kg,

with a rating of 66,6 Ah or more, but not more than 129 Ah

a length of 1475 mm or more, but not more than 2820 mm,

a width of 935 mm or more, but not more than 1660 mm,

a height of 260 mm or more, but not more than 600 mm,

a weight of 320 kg or more, but not more than 700 kg,

a nominal capacity of 18,4 Ah or more, but not more than 130 Ah,

an igniter,

a coil on plug assembly with an integrated mounting bracket,

a housing,

a length of 90 mm or more but not more than 200 mm (± 5 mm),

an operating temperature of – 40 °C or more but not more than 130 °C,

a voltage of 10,5 V or more, but not more than 16 V

plastic holder with four or more brackets,

one or more, but not more than two 12 V bulbs,

connection cable with a connector,

plastic cover,

coil,

magnet,

metal membrane,

connector,

holder,

printed circuit board inside the housing and sensor cell on the cover connected through terminal pins,

an operating voltage of not more than 12 V,

ability to receive and transmit signals processed by the control unit,

a transformer with an input of not more than 240 V and an output of not more than 3000 W,

an AC or DC fan motor with an output of not more than 42 watts,

a housing made of stainless steel,

a speaker frame and magnet system holder with a protective coating and

an embossed anti-dust cloth

a Dynamic- or Static overlay lines system,

an output NTSC video signal,

a voltage of 6,5 V or more,

an illuminance of 0,5 lux or more

an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,

a transformer and

a radio broadcast receiver

with an applicable frequency range of 10 kHz or more but no more than 100 MHz,

with a housing of ceramic plates provided with electrodes,

solely consisting of one or more TFT glass or plastic cells,

not combined with touch screen facilities,

with one or more printed circuits boards with control electronics for pixel addressing only,

with or without backlight unit and

with or without inverters

a length of 50 mm or more, but not more than 120 mm,

a width of 20 mm or more but not more than 40 mm,

a height of 30 mm or more, but not more than 120 mm,

plastic box with printed circuit board and metal holder,

with voltage of 9 V or more, but not more than 16 V,

able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder,

a microprocessor,

light-emitting diode (LED) or liquid crystal display (LCD) indicators,

electronic components mounted on a printed circuit,

with individual conductor wires of a diameter exceeding 0,51 mm,

for a voltage of not more than 1000 V,

solely consisting of one or more TFT glass or plastic cells,

combined with touch screen facilities,

with one or more printed circuits boards with control electronics for pixel addressing only,

with or without backlight unit and

with or without inverters

electric control brake,

stroke sensor,

VDC (vehicle dynamic control) and

backup power source,

a field of view range of 58,5 deg or more, but not more than 194 deg,

a focal length of 1,16 mm or more, but not more than 3,88 mm,

a relative aperture of F/2.0 or more but not more than 2.6,

a diameter of 17 mm or more but not more than 18,5 mm,

speed,

engine revolutions,

engine temperature,

the fuel level

consisting of two non-electrically connected integrated circuits, a top die and a bottom die,

positioned on the top and bottom of a lead frame,

in a semiconductor housing,

a piezoelectric crystal for generating an electrical potential during deformation and

a plastic box with metal holder,

(c) the rows for the products with the following CN and TARIC codes are deleted: CN code TARIC ex20098973 11 ex20098973 13 ex20098999 93 ex22072000 20 ex22072000 80 ex28181091 10 ex29159070 40 ex29214500 10 ex29270000 15 ex29329900 35 ex29349990 33 ex32042000 40 ex38112100 43 ex38112100 53 ex38200000 20 ex38249092 52 ex39011010 10 ex39011010 20 ex39019090 30 ex39019090 40 ex39019090 50 ex39031900 30 ex39122011 10 ex39191080 21 ex39191080 65 ex39199000 21 ex39199000 37 ex39199000 57 ex39206100 20 ex39206219 81 ex76061292 20 ex76071190 10 ex76071190 20 ex81089030 30 ex84119900 30 ex84119900 40 ex84833038 30 ex85045095 60 ex85071020 85 ex85076000 35 ex85076000 70 ex85113000 20 ex85258019 35 ex85272159 10 ex85272900 20 ex85272900 30 ex85279199 10 ex85299065 35 ex85299092 44 ex85437090 13 ex85437090 23 ex85489090 47 ex85489090 49 ex85489090 55 ex94054039 50 ex94054039 60 ex94054099 03 ex94054099 06

(2) Annex II is amended as follows:

(2)

(a) the following rows for the supplementary units with the CN and TARIC codes are added: CN TARIC SUPPLEMENTARY UNIT 90318034 50 1000 p/st 85444991 10 m 39011010 30 m3 39019090 60 m3 39209928 65 m2 39209928 75 m2 39219060 30 m2 39039090 45 m3 39207910 10 p/st 68042100 10 p/st 76169910 30 p/st 84099900 30 p/st 84119900 60 p/st 84119900 70 p/st 84798997 70 p/st 84798997 80 p/st 84833038 40 p/st 85044088 30 p/st 85044090 80 p/st 85059020 30 p/st 85113000 30 p/st 85122000 10 p/st 85122000 20 p/st 85123090 10 p/st 85129090 10 p/st 85142080 10 p/st 85169000 80 p/st 85189000 80 p/st 85291080 70 p/st 85299065 80 p/st 85299092 15 p/st 85371099 40 p/st 85371099 50 p/st 85371099 60 p/st 85489090 60 p/st 85489090 65 p/st 87083010 10 p/st 87083091 20 p/st 87083091 30 p/st 87089135 10 p/st 87089435 20 p/st 90291000 30 p/st 90292031 10 p/st 90299000 20 p/st 90318038 50 p/st 90318038 60 p/st 90318098 30 p/st

(b) the following rows for the supplementary units with the CN and TARIC codes are deleted: CN TARIC SUPPLEMENTARY UNIT 39011010 10 m3 39019090 30 m3 84119900 30 p/st 84119900 40 p/st 84833038 30 p/st 85045095 60 p/st 85113000 20 p/st 85272900 30 p/st 85299092 44 p/st 85437090 13 p/st 85437090 23 p/st 85489090 47 p/st 85489090 49 p/st 85489090 55 p/st 94054039 50 p/st 94054099 03 p/st 94054099 06 p/st

Versions

1. 2015-06-23

Cited by

• Council Regulation (EU) 2015/982 of 23 June 2015 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products Regulation · Grade B

  the note between the title and the table is replaced by the following note: Suspension relating to a product in this Annex with regard to which the CN or TARIC code or the product description or the mandatory review date were amended by Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 192, 1.7.2014, p. 9), by Council Regulation (EU) No 1341/2014 of 15 December 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tar