Council Regulation (EU) 2016/1051 of 24 June 2016 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Grade B
mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.
Address https://gelex.eu/eli/EU/regulation/2016/1051@2016-06-24/en
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1) It is in the interest of the Union to suspend totally the autonomous Common Customs Tariff duties on 140 products that are not currently listed in the Annex to Council Regulation (EU) No 1387/2013.
(2) It is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties on six of the products that are currently listed in the Annex to Regulation (EU) No 1387/2013.
(3) It is necessary to modify the conditions of 46 suspensions, currently listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments, economic trends on the market and further scrutiny of classification and to carry out linguistic adaptations. The modified conditions refer to changes of the product description, classification, duty rates or end-use requirement. The suspensions in respect of which modifications are necessary should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1387/2013, and the modified suspensions should be inserted into that list.
(4) In the interest of clarity, the endnote indicating a newly introduced measure or a measure with amended conditions listed in the Annex to Regulation (EU) No 1387/2013 should be deleted and the entries modified by this Regulation should be marked with an asterisk.
(5) Regulation (EU) No 1387/2013 should therefore be amended accordingly.
(6) As the changes regarding the suspensions for the products concerned provided for in this Regulation have to apply from 1 July 2016, this Regulation should enter into force as a matter of urgency. In addition, in order to adequately ensure the benefit of the suspension classified under TARIC code 7616991030, the newly inserted TARIC code 8708999750 should apply from 1 January 2016,
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Regulation (EU) No 1387/2013 is amended as follows:
(1) the rows for the products listed in Annex I to this Regulation are inserted following the order of the CN codes indicated in the first column of the table in the Annex to Regulation (EU) No 1387/2013;
(2) the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted;
(3)(1) endnote 1 is replaced by the following: Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).;
(4)(4) endnote 4 is replaced by the following: A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).;
(5) endnote 7 is deleted;
(6)* the following endnote marked with an asterisk is added: Suspension relating to a product in the Annex to Regulation (EU) No 1344/2011 for which the CN or TARIC code or the product description is modified by this Regulation..
Article 2
This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union. It shall apply from 1 July 2016. However, TARIC code ex 8708999750 shall apply from 1 January 2016.
This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 24 June 2016. For the Council The President A.G. Koenders
ANNEX
ANNEX I
CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review ex15121910 10 Refined safflower oil (Safloröl, CAS RN 8001-23-8) for use in the manufacture of 0 % — 31.12.2020 *ex20089991 20 Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking (1) (2) 0 % (3) — 31.12.2020 *ex20098999 96 Coconut water 0 % — 31.12.2016 *ex21061020 30 Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate 0 % — 31.12.2018 *ex28051990 20 Lithium metal of a purity by weight of 98,8 % or more (CAS RN 7439-93-2) 0 % — 31.12.2017 ex28112200 70 Amorphous silicon dioxide (CAS RN 60676-86-0), 0 % — 31.12.2020 ex28183000 20 Aluminium hydroxide (CAS RN 21645-51-2) 0 % — 31.12.2020 ex28255000 30 Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm 0 % — 31.12.2020 *ex28369917 30 Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more 0 % — 31.12.2018 *ex29033929 10 1H-Perfluorohexane (CAS RN 355-37-3) 0 % — 31.12.2018 ex29062900 40 2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0) 0 % — 31.12.2020 ex29081900 40 3,4,5-Trifluorophenol (CAS RN 99627-05-1) 0 % — 31.12.2020 ex29081900 50 4-Fluorophenol (CAS RN 371-41-5) 0 % — 31.12.2020 ex29093090 50 1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6) 0 % — 31.12.2020 ex29093090 60 1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2) 0 % — 31.12.2020 ex29094980 10 1-Propoxypropan-2-ol (CAS RN 1569-01-3) 0 % — 31.12.2020 ex29110000 10 Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2) 0 % — 31.12.2020 ex29145000 75 7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7) 0 % — 31.12.2020 ex29159070 65 2-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3) 0 % — 31.12.2020 ex29161400 30 Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least: 0 % — 31.12.2020 *ex29163990 20 3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6) 0 % — 31.12.2018 ex29163990 41 4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8) 0 % — 31.12.2020 ex29163990 51 3-Chloro-2-fluorobenzoic acid (CAS RN 161957-55-7) 0 % — 31.12.2020 ex29163990 61 2-Phenylbutyric Acid (CAS RN 90-27-7) 0 % — 31.12.2020 ex29173995 25 Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5) 0 % — 31.12.2020 ex29173995 35 1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8) 0 % — 31.12.2020 ex29189990 13 3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0) 0 % — 31.12.2020 ex29189990 18 Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9) 0 % — 31.12.2020 ex29214900 60 2,6-Diisopropylaniline (CAS RN 24544-04-5) 0 % — 31.12.2020 ex29221985 35 2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7) 0 % — 31.12.2020 *ex29222900 63 Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more 0 % — 31.12.2020 ex29223900 25 3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5) 0 % — 31.12.2020 ex29223900 35 5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5) 0 % — 31.12.2020 ex29224985 30 Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8) 0 % — 31.12.2020 ex29242998 61 (S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS 0143288-8) 0 % — 31.12.2020 ex29242998 62 2-Chlorobenzamide (CAS RN 609-66-5) 0 % — 31.12.2020 ex29242998 64 N-(3′,4′-dichloro-5-fluoro[1,1′-biphenyl]-2-yl)-acetamide (CAS RN 877179-03-8) 0 % — 31.12.2020 ex29269095 14 Cyanoacetic acid (CAS RN 372-09-8) 0 % — 31.12.2020 ex29269095 17 Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more 0 % — 31.12.2020 ex29280090 23 Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more 0 % — 31.12.2020 ex29309099 19 N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N′-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2) 0 % — 31.12.2020 ex29309099 22 Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more 0 % — 31.12.2020 ex29309099 26 Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more 0 % — 31.12.2020 ex29319080 60 4-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS RN 944129-07-1) 0 % — 31.12.2020 ex29319080 63 Chloroethenyldimethylsilane (CAS RN 1719-58-0) 0 % — 31.12.2020 ex29319080 65 Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6) 0 % — 31.12.2020 ex29319080 67 Dimethyltin dioleate (CAS RN 3865-34-7) 0 % — 31.12.2020 ex29319080 70 (4-Propylphenyl)boronic acid (CAS RN 134150-01-9) 0 % — 31.12.2020 ex29321900 20 Tetrahydrofuran-borane (CAS RN 14044-65-6) 0 % — 31.12.2020 ex29329900 65 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5) 0 % — 31.12.2020 ex29332100 55 1-Aminohydantoin hydrochloride (CAS RN 2827-56-7) 0 % — 31.12.2020 ex29332990 65 (S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8) 0 % — 31.12.2020 ex29333999 13 Methyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN 130194-96-6) 0 % — 31.12.2020 ex29333999 14 N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5) 0 % — 31.12.2020 ex29333999 16 Methyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6) 0 % — 31.12.2020 ex29333999 17 3,5-Dimethylpyridine (CAS RN 591-22-0) 0 % — 31.12.2020 ex29333999 19 Methyl nicotinate (INNM) (CAS RN 93-60-7) 0 % — 31.12.2020 ex29333999 23 2-Chloro-3-cyanopyridine (CAS RN 6602-54-6) 0 % — 31.12.2020 ex29333999 26 2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6) 0 % — 31.12.2020 ex29334910 50 1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0) 0 % — 31.12.2020 ex29335995 18 1-Methyl-3-phenylpiperazine (CAS RN 5271-27-2) 0 % — 31.12.2020 ex29335995 21 N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2) 0 % — 31.12.2020 ex29336980 13 Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more 0 % — 31.12.2020 ex29336980 17 Benzoguanamine (CAS RN 91-76-9) 0 % — 31.12.2020 ex29339980 16 Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more 0 % — 31.12.2020 ex29339980 17 Carfentrazone-ethyl (ISO) (CAS RN 128639-02-1) with a purity by weight of 93 % or more 0 % — 31.12.2020 ex29339980 21 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1) 0 % — 31.12.2020 ex29339980 26 (2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4-methylbenzenesulfonate (CUS 0143289-9) 0 % — 31.12.2020 ex29339980 29 3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7) 0 % — 31.12.2020 ex29339980 31 Triadimenol (ISO) (CAS RN 55219-65-3) with a purity by weight of 97 % or more 0 % — 31.12.2020 ex29349990 36 Oxadiazon (ISO) (CAS RN 19666-30-9) with a purity by weight of 95 % or more 0 % — 31.12.2020 ex29349990 38 Clomazone (ISO) (CAS RN 81777-89-1) with a purity by weight of 96 % or more 0 % — 31.12.2020 ex29349990 39 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) 0 % — 31.12.2020 ex29349990 41 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8) 0 % — 31.12.2020 ex29349990 42 1-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4) 0 % — 31.12.2019 ex29349990 44 Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more 0 % — 31.12.2020 ex29350090 52 (1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS 0143290-2) (5) 0 % — 31.12.2020 ex29350090 54 Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more 0 % — 31.12.2020 ex29350090 56 N-(p-Toluenesulphonyl)-N′-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) 0 % — 31.12.2020 ex29350090 57 N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4) 0 % — 31.12.2020 ex29350090 58 1-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8) 0 % — 31.12.2020 *ex29350090 59 Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more 0 % — 31.12.2020 *ex32019090 ex32029000 40 10 Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3) 0 % — 31.12.2020 ex32041700 16 Colourant C.I. Pigment Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a Colourant C.I. Pigment Red 49:2 content of 60 % or more by weight 0 % — 31.12.2020 *ex32121000 ex76072090 ex76169990 10 30 25 Metallised film: 0 % — 31.12.2019 ex35079090 20 Creatine amidinohydrolase (CAS RN 37340-58-2) 0 % — 31.12.2020 *ex37013000 30 Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,15 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm 0 % — 31.12.2018 ex38021000 10 Mixture of activated carbon and polyethylene, in form of powder 0 % — 31.12.2020 ex38089230 10 Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more (2) 0 % — 31.12.2020 ex38112100 12 Dispersing agent containing: used in the manufacture of blends of additives for lubricating oils (1) 0 % — 31.12.2020 ex38112100 14 Dispersing agent: used in the manufacture of blends of additives for lubricating oils (1) 0 % — 31.12.2020 ex38112100 16 Detergent containing: used in the manufacture of blends of additives for lubricating oils (1) 0 % — 31.12.2020 ex38112100 18 Detergent containing: used in the manufacture of blends of additives for lubricating oils (1) 0 % — 31.12.2020 ex38249092 21 Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in Toluene 0 % — 31.12.2020 ex38249092 22 Aqueous solution containing by weight 0 % — 31.12.2020 ex38249092 23 Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol 0 % — 31.12.2020 *ex39011010 40 Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with 0 % m3 31.12.2018 ex39019090 53 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with 0 % m3 31.12.2020 ex39019090 57 Octene linear low-density polyethylene (LLDPE) in the form of pellets used in the co-extrusion processing of films for flexible food packaging with: 0 % m3 31.12.2020 ex39019090 63 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with: for use in the co-extrusion processing of films for flexible food packaging (1) 0 % m3 31.12.2020 *ex39019090 65 Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with 0 % m3 31.12.2018 *ex39019090 67 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more 0 % — 31.12.2020 ex39039090 46 Copolymer in the form of granules containing by weight: 0 % m3 31.12.2020 ex39039090 70 Copolymer in the form of granules containing by weight: 0 % m3 31.12.2020 ex39071000 10 Mixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene 0 % — 31.12.2020 ex39071000 20 Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine 0 % — 31.12.2020 ex39073000 15 Epoxide resin, halogen-free, for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits (1) 0 % — 31.12.2020 ex39073000 25 Epoxide resin 0 % — 31.12.2020 *ex39074000 35 α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2) 0 % — 31.12.2018 ex39100000 15 Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated 0 % — 31.12.2020 ex39191080 63 Reflecting film consisting of 0 % — 31.12.2020 *ex39191080 ex39199000 73 50 Self-adhesive reflecting sheet whether or not in segmented pieces, the reflective sheet consists of: 0 % — 31.12.2018 ex39199000 52 White polyolefin tape consisting of: 0 % — 31.12.2020 *ex39199000 54 Poly(vinyl chloride) film, whether or not covered on one side with a layer of polymer, with 0 % — 31.12.2019 *ex39202029 60 Mono-axial oriented film, of a total thickness of not more than 75 μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: 0 % — 31.12.2018 *ex39202029 70 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa 0 % — 31.12.2019 *ex39209959 65 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 % 0 % — 31.12.2018 ex39211900 40 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: of a kind used for the manufacture of alkaline battery separators 0 % — 31.12.2020 ex39219055 50 Glass fibre-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems (1) 0 % m2 31.12.2020 ex40169300 20 Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow of the material in the place of mold split of not more than 0,25 mm, in the shape of a rectangle: 0 % — 31.12.2020 ex41044151 10 Crust leather of zebu species or zebu-hybrid species with a unit surface area of more than 2,6 m2 and containing a hump hole of 450 cm2 or more but not more than 2850 cm2, for use in the manufacture of raw material for seat covers of motor vehicles (1) 0 % — 31.12.2020 ex54033900 10 Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry (1) 0 % — 31.12.2020 *ex68042100 20 Discs 0 % p/st 31.12.2019 *ex68138900 20 Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components (1) 0 % — 31.12.2018 ex70091000 40 Electrochromic self-dimming inside rear-view mirror, consisting of: for use in the manufacture of motor vehicles of Chapter 87 (1) 0 % — 31.12.2020 *ex76169910 ex87089997 30 50 Aluminium engine bracket, with dimensions of: equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: of a kind used in the production of suspensions systems for engines in motor vehicles 0 % p/st 31.12.2019 ex81082000 40 Titanium alloy ingot, containing alloy elements by weight of: 0 % — 31.12.2020 ex81082000 50 Titanium alloy ingot, containing alloy elements by weight of: 0 % — 31.12.2020 ex81082000 60 Titanium alloy ingot, containing alloy elements by weight of: 0 % — 31.12.2020 ex81130090 20 Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules 0 % — 31.12.2020 ex83022000 20 Castors, with 0 % p/st 31.12.2020 *ex84079010 10 Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 8508 (1) 0 % — 31.12.2016 *ex84089043 ex84089045 ex84089047 40 30 50 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: for use in the manufacture of vehicles of heading 8427 (1) 0 % — 31.12.2017 ex84159000 30 Aluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with: of a kind used in car air-conditioning systems 0 % p/st 31.12.2020 ex84159000 40 Flame-soldered aluminium block with extruded, bent connector lines, of a kind used in car air-conditioning systems 0 % p/st 31.12.2020 ex84159000 50 Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with: of a kind used in car air-conditioning systems 0 % p/st 31.12.2020 ex84369900 10 Part containing: and whether or not containing: for use in the manufacture of garden shredders (1) 0 % p/st 31.12.2020 *ex84798997 15 Bioreactor for biopharmaceutical cell culture 0 % p/st 31.12.2019 *ex84821010 ex84821090 30 20 Ball bearings: for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears (1) 0 % p/st 31.12.2019 ex85011010 20 Synchronous motor for a dishwasher with a water flow control mechanism with 0 % — 31.12.2020 ex85011099 55 Electric turbocharger actuator, with: 0 % — 31.12.2020 ex85011099 57 DC motor: 0 % — 31.12.2020 ex85013100 ex85013200 35 70 Automotive-ready, brushless and permanently excited direct current motor with: 0 % — 31.12.2020 *ex85013200 ex85013300 60 15 Traction motor, with: for use in the manufacture of electric vehicles (1) 0 % — 31.12.2019 ex85051100 ex85051990 55 40 Flat bars of an alloy of samarium and cobalt with intended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars 0 % p/st 31.12.2020 ex85065010 10 Lithium cylindrical primary cells with: for use in the manufacture of telemetry and medical devices, electronic meters or remote controls (1) 0 % — 31.12.2020 *ex85071020 30 Lead-acid accumulators or modules, with for use in the manufacture of articles of heading 8711 (1) 0 % — 31.12.2018 *ex85076000 71 Lithium-ion rechargeable batteries, with: a power of not more than 130 kWh 0 % — 31.12.2017 *ex85087000 ex85371099 10 96 Printed circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W 0 % p/st 31.12.2020 ex85122000 30 Lighting module, containing at least: in an aluminium housing with a radiator, mounted at a bracket with an actuator 0 % p/st 31.12.2020 *ex85122000 40 Fog lamp with a galvanised inner surface, containing: for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2019 ex85123090 20 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: of a kind used in the manufacture of goods of chapter 87 0 % p/st 31.12.2020 ex85189000 60 Upper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in the shape of a disk, whether or not containing a hole in the centre, of a kind used in car loudspeakers 0 % — 31.12.2020 ex85235199 10 SD memory card with non-upgradable set of uploaded maps for incorporation into car navigation units (1) 0 % — 31.12.2020 *ex85258019 70 Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with: 0 % — 31.12.2019 *ex85299092 35 LCD modules with: for permanent incorporation or permanent mounting into motor vehicles of chapter 87 (1) 0 % — 31.12.2020 *ex85299092 36 LCD module with: for installation in motor vehicles of chapter 87 (1) 0 % — 31.12.2020 *ex85299092 55 OLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities and one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors (1) 0 % p/st 31.12.2019 ex85299092 85 Colour LCD module in a housing: for permanent installation in vehicles of Chapter 87 (1) 0 % p/st 31.12.2020 *ex85359000 20 Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back-light units for LCD modules (1) 0 % p/st 31.12.2018 ex85366990 60 Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors (1) 0 % p/st 31.12.2020 ex85369085 20 Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V 0 % p/st 31.12.2020 ex85369085 30 Rivet contacts 0 % p/st 31.12.2020 ex85371091 50 Fuse control module in a plastic housing with mounting brackets comprising: of a kind used in the manufacture of goods of chapter 87 0 % p/st 31.12.2020 *ex85371091 ex85371099 60 45 Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least: of a kind used for manufacturing recycling or sorting machines 0 % p/st 31.12.2018 ex85371099 35 Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing: 0 % p/st 31.12.2020 ex85389091 ex85389099 20 50 Interior antenna for a car door locking system, comprising: of a kind used in the manufacture of goods of CN heading 8703 0 % p/st 31.12.2020 ex85443000 ex85444290 80 60 Extension two-core cable with two connectors, containing at least: of a kind used to connect vehicle speed sensors in the manufacture of vehicles of chapter 87 0 % p/st 31.12.2020 ex85444290 70 Electric conductors: for use in the manufacture of hearing aids, accessory kits and speech processors (1) 0 % p/st 31.12.2020 ex85444993 30 Electric conductors: for use in the manufacture of hearing aids, implants and speech processors (1) 0 % m 31.12.2020 *ex87083010 20 Motor powered brake actuation unit for use in the manufacture of electric motor vehicles (1) 0 % p/st 31.12.2019 ex87084050 10 Automatic hydrodynamic gearbox with a hydraulic torque converter without transfer box, cardan shaft and front differential for use in the manufacture of motor vehicles of Chapter 87 (1) 0 % p/st 31.12.2020 ex87085055 10 Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703 0 % p/st 31.12.2020 ex87089199 30 Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: of a kind used in heat exchangers for car cooling systems 0 % p/st 31.12.2020 ex87141090 20 Radiators of a kind used in motor bikes for fitting of attachments (1) 0 % p/st 31.12.2020 *ex87149130 ex87149130 ex87149130 24 34 71 Front forks with aluminium legs, for use in the manufacture of bicycles (1) 0 % — 31.12.2018 ex87149610 10 Pedals, for use in the manufacture of bicycles (1) 0 % — 31.12.2020 ex87149990 30 Seat posts, for use in the manufacture of bicycles (1) 0 % p/st 31.12.2020 *ex90015041 ex90015049 30 30 Round organic uncut corrective eyeglass lens, finished on both sides: of a kind used to be processed in order to be adapted to a pair of glasses 1,45 % — 31.12.2019 *ex90015080 30 Round organic uncut corrective eyeglass lens blanks, finished on one side: of a kind used to be processed in order to be adapted to a pair of glasses 0 % — 31.12.2019 ex90021100 ex90021900 15 10 Infrared lens with motorised focus adjustment, for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes (1) 0 % — 31.12.2020 *ex90258040 50 Electronic semiconductor sensor for measuring at least two of the following quantities: of a kind used for incorporation into products of Chapters 84-90 and 95 0 % p/st 31.12.2019 *ex90318038 15 Device for measuring wheel speed in vehicles (semi-conductor wheel speed sensor), consisting of: for detecting the movement of a pulse generator 0 % p/st 31.12.2018 *ex90318038 25 Electronic semiconductor sensor for measuring acceleration and/or angular rate: of a kind used for incorporation into products of Chapters 84-90 and 95 0 % p/st 31.12.2019 *ex94019080 20 Sidemember with a thickness of 0,8 mm or more but not more than 3,0 mm, used in the manufacture of reclining car seats (1) 0 % p/st 31.12.2018 ex96072010 10 Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers (1) 0 % — 31.12.2020 ex96072090 10 Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers (1) 0 % — 31.12.2020
conjugated linoleic acid of heading 3823 or
ethyl- or methyl esters of linoleic acid of heading 2916 (1)
unfermented,
not containing added spirit or sugar, and
in immediate packing of a content of 50 litres or more (2)
in the form of powder
of a purity by weight of 99,7 % or more
with a median grain size of 0,7 μm or more, but not more than 2,1 μm
where 70 % of the particles have a diameter of not more than 3 μm
in the form of powder
with a purity by weight of 99,5 % or more
with a decomposition point of 263o C or more
with a particle size of 4 μm (± 1 μm)
with a Total-Na2O-content by weight of not more than 0,06 %
0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),
0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and
0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5) (1)
consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,
with an optical density of each aluminium layer of not more than 3,0,
with each aluminium layer separated by a resin layer,
on a carrier film of PET, and
on rolls of up to 50000 metres in length
esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),
35 % or more but not more than 55 % by weight of mineral oils and
with a chlorine content of not more than 0,05 % by weight,
containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),
containing 35 % or more but not more than 55 % by weight of mineral oils,
with a chlorine content by weight of not more than 0,05 %,
having a total base number of less than 15,
Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)
40 % or more but not more than 60 % by weight of mineral oils and
having a total base number more than 120
long chain alkyltoluene calcium sulphonates,
more than 30 % but not more than 50 % by weight of mineral oils, and
having a total base number of more than 310 but not more than 340,
38 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),
21 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9) and
1 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)
not more than 5 % by weight of comonomer,
a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and
a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3
an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and
a melt flow rate of 14g/10 min (MFR 125 °C/2,16 kg, ASTM D1238) or more
10 % or more but not more than 20 % by weight of octene,
a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),
a melt index (190 °C/2,16 kg) of 0,4 g/10 min but not more than 0,6 g/10 min,
a density (ASTM D4703) of 0,909 g/cm3 or more, but not more than 0,913 g/cm3,
a gel area per 24,6 cm3 of not more than 20 mm2; and
an anti-oxidant level not exceeding 240 ppm
more than 10 % but not more than 20 % by weight of copolymer,
a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and
a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3
more than 5 %, but not more than 8 % by weight of comonomer,
a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and
a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3
74 % (± 4 %) styrene,
24 % (± 2 %) n-butylacrylate and
0,01 % or more but not more than 2 % methacrylic acid
75 % (± 7 %) styrene and
25 % (± 7 %) methylmethacrylate
containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,
not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and
containing solvents
containing by weight 21 % or more of brome,
not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and
containing solvents
a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,
a layer of an acrylic resin having embedded glass beads,
a layer of an acrylic resin hardened by a melamine cross-linking agent,
a metal layer,
an acrylic adhesive, and
a release film
whether or not containing a watermark,
with or without an application tape coated on one side with an adhesive;
a layer of acrylic or vinyl polymer,
a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,
a layer of metallisation,
an adhesive layer, and
a release sheet
whether or not containing an additional layer of polyester
an adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not more than 17 μm,
a polyolefin layer with a thickness of 28 μm or more but not more than 40 μm, and
a non-silicone release layer with a thickness below 1 μm
an acrylic adhesive with an adhesive strength of 70 N/m or more whether or not reduced upon irradiation,
a total thickness without release liner of 78 microns or more, and
a release liner, whether or not equipped with oblate spheres and on one side embossed
a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa and
a tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa
as determined by test method ASTM D882/ISO 527-3
a thickness of 55 μm or more but not more than 97 μm,
a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and
a width of 98 mm or more but not more than 170 mm,
a thickness of 15 μm or more but not more than 36 μm,
with a length of 72 mm or more but not more than 825 mm;
with a width of 18 mm or more but not more than 155 mm
of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,
having a self-sharpening effect by constant release of the diamonds,
suitable for abrasive cutting of wafers,
whether or not containing a hole in the centre,
whether or not on a support
with a weight of not more than 377 g per piece and
with an external diameter of not more than 206 mm
a mirror support
a plastic casing and
an integrated circuit
height of more than 10 mm but not more than 200 mm
width of more than 10 mm but not more than 200 mm
length of more than 10 mm but not more than 200 mm
internal porosity not more than 1 mm;
outer porosity not more than 2 mm;
Rockwell hardness HRB 10 or more
with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more,
a weight of 680 kg or more,
3 % or more but not more than 6 % of aluminium
2,5 % or more but not more than 5 % of tin
2,5 % or more but not more than 4,5 % of zirconium
0,2 % or more but not more than 1 % of niobium
0,1 % or more but not more than 1 % of molybdenum
0,1 % or more but not more than 0,5 % of silicon
with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more,
a weight of 680 kg or more,
3 % or more but not more than 7 % of aluminium
1 % or more but not more than 5 % of tin
3 % or more but not more than 5 % of zinc
4 % or more but not more than 8 % of molybdenum
with a diameter of 63,5 cm or more and a length of 450 cm or more,
a weight of 6350 kg or more,
5,5 % or more but not more than 6,7 % of aluminium,
3,7 % of more but not more than 4,9 % of vanadium
an external diameter of 21 mm or more but not more than 23 mm,
a width with screw of 19 mm or more but not more than 23 mm,
a U-shaped plastic outer ring,
an assembly screw fitted to the internal diameter and used as an inner ring
a capacity of not more than 3850 cm3, and
a rated output of 15 kW or more but not more than 85 kW,
a length of 166 mm (+/– 1 mm),
a diameter of 70 mm (+/– 1 mm),
an internal capacity of 280 cm3 or more,
a water absorption rate of 17 g or more, and
an internal purity expressed by permissible amount of impurities of not more than 0,9 mg/dm2
a length of 291 mm (+/– 1 mm),
a diameter of 32 mm (+/– 1 mm),
a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm,
a solid particle diameter of not more than 0,06 mm
a single-phase AC motor,
an epicyclic gearing,
a cutter blade
a capacitor,
a part fitted with a threaded bolt
having interior surfaces of type 316L austenitic stainless steel
with a process capacity of 50 litres, 500 litres, 3000 litres, 5000 litres, 10000 litres or 15000 litres
whether or not combined with a clean-in-process system and/or a dedicated paired media hold vessel
with an internal diameter of 3 mm or more,
with an external diameter of not more than 100 mm,
with a width of not more than 40 mm,
whether or not equipped with a duster,
a length without axle of 24 mm (+/– 0,3),
a diameter of 49,3 mm (+/– 0,3),
a rated voltage of 220 V AC or more but not more than 240 V AC,
a rated frequency of 50 Hz or more but not more than 60 Hz,
an input power of not more than 4 W,
a rotation speed of 4 rpm or more but not more than 4,8 rpm,
an output torque of not more than 10 kgf/cm
a DC motor with an output of 10 W or more but not more than 15 W,
an integrated gear mechanism,
a (pulling)force of 250 N or more at 160 °C elevated ambient temperature,
a (pulling) force of 250 N or more in each position of its stroke,
an effective stroke of 15 mm or more but not more than 20 mm,
with or without an on-board diagnostics interface
with a rotor speed of not more than 6500 rpm when not loaded;
with a rated voltage of 12,0 V (+/– 0,1);
of a specified temperature range of – 40 °C or more, but not more than + 165 °C;
with or without a connecting pinion;
with or without an engine connector
a specified speed of not more than 4000 rpm,
a minimum output of 400 W, but not more than 1,3 kW (at 12 V),
a flange diameter of 90 mm or more, but not more than 150 mm,
a maximum length of 190 mm, measured from the beginning of the shaft to the outer ending,
a housing length of not more than 150 mm, measured from the flange to the outer ending,
a two-piece (basic housing including electric components and flange with minimum 2 and maximum 6 bore holes) aluminium diecast housing with a sealing compound (groove with an O-ring and grease),
a stator with single T-tooth design and single coil windings in 12/8 topology and
surface magnets
a torque output of 200 Nm or more but not more than 300 Nm
a power output of 50 kW or more but not more than 100 kW
a rated speed of not more than 12500 rpm
a length of 30,4 mm (± 0,05 mm);
a width of 12,5 mm (± 0,15 mm);
a thickness of 6,9 mm (± 0,05 mm), or composed of ferrites in the shape of a quarter sleeves with:
a length of 46 mm (± 0,75 mm);
a width of 29,7 mm (± 0,2 mm),
a diameter of 14,0 mm or more but not more than 26,0 mm;
a length of 25 mm or more but not more than 51 mm;
a voltage of 1,5 V or more, but not more than 3,6 V;
a capacity of 0,80 Ah or more, but not more than 5,00 Ah
a nominal capacity of not more 32 Ah,
a length of not more than 205 mm,
a width of not more than 130 mm and
a height of not more than 190 mm
a length of 700 mm or more, but not more than 2820 mm
a width of 935 mm or more, but not more than 1660 mm
a height of 85 mm or more, but not more than 700 mm
a weight of 280 kg or more, but not more than 700 kg
two LEDs,
glass or plastic lenses, focusing/scattering the light emitted by the LEDs,
reflectors redirecting the light emitted by the LEDs,
a plastic holder with three or more brackets,
one or more 12 V bulbs,
a connector,
a plastic cover,
whether or not with a connection cable
a printed circuit board,
a connector,
whether or not a metal holder
a sensitivity in the wavelength area of 7,5 μm or more, but not more than 17 μm,
a resolution of up to 640 × 512 pixels,
a weight of not more than 400 g,
measurements of not more than 70 mm × 86 mm × 82 mm,
whether or not in a housing
with automotive- qualified plug and
a deviation of the output signal over the entire work temperature range of not more than 20 %
a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,
a LED backlight,
a printed circuit board with EPROM, microcontroller, timing controller, LIN bus driver module and other active and passive components,
an 8 pin plug for power supply and 4- pin LVDS interface,
whether or not in a housing,
a diagonal measurement of the screen of 14,5 cm or more but not more than 20,3 cm,
or without a touch screen,
an LED backlight,
a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,
a 12 pin plug for power supply and CAN and LVDS interfaces,
in a housing with monitor and other control functions,
with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,
without touch screen,
with a backlight and micro-controller,
with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,
without a signal processing module,
with control electronics for pixel addressing only,
with a motorised mechanism for moving the display screen,
of copper
plated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken together
with a thickness of the plating of 0,3 mm (– 0/+ 0,015 mm)
sockets with or without fuses,
connecting ports,
a printed circuit board with embedded microprocessor, micro switch and relay
an AC power input of 208 V or more but not more than 400 V,
a logic power input of 24 V DC,
an automatic circuit breaker,
a main power switch,
internal or external electrical connectors and cables,
in a housing with dimension of 281 mm × 180 mm × 75 mm or more, but not more than 630 mm × 420 mm × 230 mm,
2 rotary knobs
27 or more pushbuttons
LED lights
2 integrated circuits for receiving and sending of control signals via the LIN-bus
an antenna module in a plastic housing,
a connection cable with a plug,
at least two mounting brackets
whether or not PCB including integrated circuits, diodes and transistors
a rubber grommet,
a plastic conduit,
a metal attachment bracket
of a voltage of not more than 80 V,
with a length of not more than 120 cm,
fitted with connectors,
of a voltage of not more than 80 V,
of a platinum-iridium-alloy,
coated with poly(tetrafluoroethylene),
without connectors,
with a rating of 13,5 V (± 0,5 V) and
a ball screw mechanism to control brake fluid pressure in the master cylinder
an insulating area flatness of not more than 0,1 mm,
a permissible particle quantity of 0,3 mg per tank,
a distance between pores of 2 mm or more,
pore sizes of not more than 0,4 mm, and
not more than 3 pores larger than 0,2 mm
of a diameter of 4,9 cm or more but not more than 8,2 cm,
of a height of 0,5 cm or more but not more than 1,8 cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre
of a diameter of 5,9 cm or more but not more than 8,5 cm
of a height of 1,2 cm or more but not more than 3,5 cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre
using wavelengths of 3 μm or more but not more than 5 μm,
providing a clear picture from 50 m to infinity,
with fields of vision sizes of 3° × 2,25° and 9° × 6,75°,
with a weight of not more than 230 g,
with a length of not more than 88 mm,
with a diameter of not more than 46 mm,
athermalised,
Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,
in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:
one or more monolithic application-specific integrated circuits (ASIC),
one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,
a monolithic integrated circuit in a housing, and
one or more discrete SMD capacitors connected in parallel to the integrated circuit
whether or not with integrated permanent magnets
whether or not in combination with a magnetic field sensor;
in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:
one or more monolithic application-specific integrated circuits (ASIC),
one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,
whether or not with an integrated microcontroller
ANNEX II
CN code TARIC *ex20089991 10 *ex20098999 94 *ex21061020 10 *ex28051990 10 *ex28369917 20 *ex29033929 10 *ex29163990 20 *ex29222900 60 *ex29350090 41 *ex32019090 40 ex32041700 70 *ex32121000 10 *ex37013000 10 *ex38249092 62 *ex39011010 30 ex39013000 80 *ex39019090 60 *ex39019090 82 *ex39191080 67 *ex39199000 46 *ex39199000 48 *ex39202029 92 *ex39202029 93 *ex39209959 60 *ex68042100 10 *ex68138900 10 ex76061292 40 *ex76072090 30 *ex76169910 30 *ex84079010 10 *ex84089043 30 *ex84089045 20 *ex84089047 30 ex84089047 40 *ex84798997 60 *ex84821010 20 *ex85013200 60 *ex85013300 15 *ex85071020 30 *ex85076000 63 *ex85087000 10 *ex85122000 10 ex85129090 10 *ex85258019 25 ex85269120 80 ex85272900 10 *ex85299092 35 *ex85299092 36 *ex85299092 55 *ex85359000 20 *ex85371091 40 *ex85371099 96 *ex87083010 10 *ex87149130 24 *ex87149130 34 *ex87149130 71 *ex90015041 20 *ex90015049 20 *ex90015080 20 *ex90258040 40 *ex90291000 20 *ex90318038 40 *ex94019080 20