Commission Implementing Regulation (EU) 2016/1831 of 14 October 2016 amending Council Regulation (EC) No 329/2007 concerning restrictive measures against the Democratic People's Republic of Korea
Grade B
mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.
Address https://gelex.eu/eli/EU/regulation/2016/1831@2016-10-14/en
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Council Regulation (EC) No 329/2007 of 27 March 2007 concerning restrictive measures against the Democratic People's Republic of Korea, and in particular Article 13(1)(g) thereof,
Whereas:
(1) Regulation (EC) No 329/2007 gives effect to measures provided for in Council Decision (CFSP) 2016/849.
(2) On 2 March 2016, the United Nations Security Council adopted Resolution (UNSCR) 2270 (2016) providing for new measures against North Korea. In accordance with that Resolution, on 4 April 2016 the Sanctions Committee established pursuant to UNSCR 1718 (2006) published a list of additional goods to which prohibitions on the transfer, procurement and provision of technical assistance apply (the sensitive goods list).
(3) Following the adoption of Resolution (UNSCR) 2270 (2016), on 4 August 2016 the Council adopted Decision (CFSP) 2016/1341. Council Regulation (EU) 2016/1333 amended Regulation (EC) No 329/2007 accordingly, adding Annex Ig.
(4) This proposal identifies the sensitive goods to be included in Annex Ig of Regulation (EC) No 329/2007 and allocates the reference numbers taken from the Combined Nomenclature as set out in Annex I to Council Regulation (EEC) No 2658/87. Annex Ig of Regulation (EC) No 329/2007 should therefore be amended accordingly,
HAS ADOPTED THIS REGULATION:
Article 1
Annex Ig to Regulation (EC) No 329/2007 is amended in accordance with the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 14 October 2016. For the Commission, On behalf of the President, Acting Head of the Service for Foreign Policy Instruments
ANNEX
ANNEX
Annex Ig to Council Regulation (EC) No 329/2007 is replaced by the following:
ANNEX Ig GOODS AND TECHNOLOGY REFERRED TO IN ARTICLES 2, 3 AND 6
Weapons of mass destruction-related items, materials, equipment, goods and technology identified and designated as sensitive goods, pursuant to paragraph 25 of UN Security Council Resolution 2270.
(a) Nuclear- and/or Missile-usable Items
(a)
(1) Ring Magnets Permanent magnet materials having both the following characteristics:
(1) i.
Ring-shaped magnet with a relation between outer and inner diameter smaller or equal to 1.6:1; and
ii.
Made of any of the following magnetic materials: aluminium-nickel-cobalt, ferrites, samarium-cobalt, or neodymium-iron-boron.
ex85051100
ex85051910
ex85051990
ex85059090
(2) Maraging Steel Maraging steel having both the following characteristics:
(2) i.
capable of an ultimate tensile strength of 1500 MPa or more at 293 K (20 °C).
ii.
In bar or tube form, with an outer diameter of 75 mm or greater.
ex73044910
ex73045181
ex73045189
ex73045992
ex73045993
ex73045999
(3) Magnetic alloy materials in sheet or thin strip form having both of the following characteristics:
(3)
(a) Thickness of 0,05 mm or less; or height of 25 mm or less, and
(b) Made of any of the following magnetic alloy materials: iron-chromium-cobalt, iron-cobalt-vanadium, iron-chromium-cobalt-vanadium, or iron-chromium.
ex73261910
ex73261990
ex73269092
ex73269094
ex73269096
ex73269098
(4) Technical Notes: (1)(2)
Frequency Changers (also known as converters or inverters) Frequency changers, other than those specified in entries 0B001.b.13 or 3A225 of Annex 1, having all of the following characteristics, and specially designed software therefore: Frequency changers are also known as converters or inverters. The functionality specified above may be met by certain equipment described or marketed as electronic test equipment, AC power supplies, variable speed motor drives, or variable frequency drives.
(4) i.
Multiphase frequency output;
ii.
Capable of providing a power of 40 W or greater; and
iii.
Capable of operating anywhere (at any one point or more) within the frequency range of between 600 and 2000 Hz.
ex85044084
ex85044088
ex85044090
ex85371099
ex85372091
ex85372099
(5) Technical Note:
High-strength Aluminium Alloy Aluminium alloys having both the following characteristics: The phrase capable of encompasses aluminium alloy before or after heat treatment.
(5) i.
capable of an ultimate tensile of strength of 415 MPa or more at 293 K (20 °C) and
ii.
In bar or tube form, with an outer diameter of 75 mm or greater.
ex76012080
ex76042910
ex76082020
ex76082081
ex76082089
(6) Fibrous or Filamentary Materials Fibrous or filamentary materials and prepregs, as follows:
(6) i.
Carbon, aramid, or glass fibrous or filamentary materials having both of the following characteristics:
(1) A specific modulus exceeding 3,18 × 106 m; and
(2) A specific tensile strength exceeding 76,2 × 103 m;
ii.
Prepregs: Thermoset resin-impregnated continuous yarns, rovings, tows or tapes with a width of 30 mm or less, made from carbon, aramid, or glass fibrous or filamentary materials controlled in (a) above.
ex39169010
ex39169050
ex39169090
ex39209200
ex39209928
ex39209952
ex39209959
ex39209990
ex39219055
ex39219060
ex39219090
ex39269092
ex39269097
ex54021100
ex54021900
ex54023100
ex54023200
ex54031000
ex54049090
ex54071000
ex54072090
ex54074100
ex54074200
ex54074300
ex54074400
ex55011000
ex55019000
ex55031100
ex55031900
ex55032000
ex55039000
ex55061000
ex55069000
ex55091100
ex55091200
ex56049010
ex56075011
ex56075019
ex56075030
ex56075090
ex56090000
ex59021010
ex59021090
ex59022090
ex59029010
ex59029090
ex59031010
ex59031090
ex59032010
ex59032090
ex59039010
ex59039091
ex59039099
ex68151010
ex68159900
ex70191200
ex70191910
ex70191990
ex70195100
ex70195900
ex70199000
(7) Filament Winding Machines and Related Equipment Filament winding machines and related equipment, as follows:
(7) i.
Filament winding machines having all of the following characteristics:
(1) Having motions for positioning, wrapping, and winding fibres coordinated and programmed in two or more axes;
(2) Specially designed to fabricate composite structures or laminates from fibrous or filamentary materials; and
(3) Capable of winding cylindrical tubes of diameter of 75 mm or greater;
ii.
Coordinating and programming controls for filament winding machines specified in (a) above;
iii.
Mandrels for filament winding machines specified in (a) above.
ex84198930
ex84198998
ex84199085
ex84440010
ex84440090
ex84461000
ex84462100
ex84462900
ex84463000
ex84471100
ex84471200
ex84472020
ex84472080
ex84479000
ex84481900
ex84482000
ex84483900
ex84484200
ex84484900
ex84485900
ex84798997
ex84799020
ex84799080
ex85371010
ex85371091
ex85371099
ex85381000
ex90221200
ex90221900
ex90229000
ex90318038
ex90318098
ex90319085
(8) Flow-forming Machines As described in INFCIRC/254/Rev.9/Part2 and S/2014/253
ex84639000
ex84669400
(9) Laser welding equipment
ex85158010
ex85158090
ex85159000
(10) 4- and 5-axis CNC machine tools
ex84571010
ex84571090
ex84572000
ex84573010
ex84573090
ex84581120
ex84581141
ex84581149
ex84581180
ex84581900
ex84589120
ex84589180
ex84589900
ex84591000
ex84592100
ex84593100
ex84594010
ex84595100
ex84596110
ex84596190
ex84601100
ex84602111
ex84602115
ex84602119
ex84602190
ex84603100
ex84604010
ex84609010
ex84609090
ex84612000
ex84613010
ex84614011
ex84614031
ex84614071
ex84614090
ex84619000
ex84642011
ex84642019
ex84642080
ex84649000
(11) Plasma cutting equipment
ex84561000
ex84569080
ex85153100
ex85153990
ex85158010
ex85158090
ex85159000
(12) Metal hydrides such as, zirconium hydride ex28500020
(b) Chemical/Biological Weapons-usable Items
(b)
(1) Additional chemicals suitable for the production of chemical warfare agents: Product description Cn code Sodium metal (7440-23-5) 28051100 Sulphur trioxide (7446-11-9) ex 28112910 Aluminium chloride (7446-70-0) 28273200 Potassium Bromide (7758-02-3) 28275100 Sodium bromide (7647-15-6) 28275100 Dichloromethane (75-09-2) 29031200 Isopropyl bromide (75-26-3) ex 29033919 Isopropyl ether (108-20-3) ex 29091990 Monoisopropylamine (75-31-0) ex 29211999 Trimethylamine (75-50-3) ex 29211100 Tributylamine (102-82-9) ex 29211999 Triethylamine (121-44-8) ex 29211999 N,N-Dimethylaniline (121-69-7) ex 29214200 Pyridine (110-86-1) ex 29333100
(2) Reaction vessels, reactors, agitators, heat exchangers, condensers, pumps, valves, storage tanks, containers, receivers, and distillation or absorption columns that meet performance parameters described in S/2006/853 and S/2006/853/corr.1
Single-seal pumps with manufacturer's specified maximum flow-rate greater than 0,6 m3/h and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials:
(2)
pt_1
(a) nickel or alloys with more than 40 % nickel by weight;
(b) alloys with more than 25 % nickel and 20 % chromium by weight;
(c) fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);
(d) glass or glass-lined (including vitrified or enamelled coating);
(e) graphite or carbon-graphite;
(f) tantalum or tantalum alloys;
(g) titanium or titanium alloys;
(h) zirconium or zirconium alloys;
(i) ceramics;
(j) ferrosilicon (high silicon iron alloys); or
(k) niobium (columbium) or niobium alloys.
ex39251000
ex39259080
ex39269092
ex39269097
ex40092100
ex40092200
ex40094100
ex40094200
ex40169300
ex69091100
ex69091200
ex69091900
ex69099000
ex69149000
ex70200010
ex70200030
ex70200080
ex73044100
ex73044993
ex73044995
ex73044999
ex73045181
ex73045189
ex73045992
ex73045993
ex73045999
ex73064020
ex73064080
ex73065020
ex73065080
ex73066910
ex73066990
ex73069000
ex73090010
ex73090030
ex73090051
ex73090059
ex73090090
ex73101000
ex73102910
ex73102990
ex73110000
ex73269092
ex73269094
ex73269096
ex73269098
ex75071100
ex75071200
ex75072000
ex75089000
ex81039090
ex81089050
ex81089060
ex81089090
ex81099000
ex81129930
ex84012000
ex84014000
ex84011000
ex84129020
ex84135040
ex84136039
ex84136061
ex84136069
ex84136070
ex84136080
ex84137021
ex84137029
ex84137045
ex84137051
ex84137059
ex84137065
ex84137075
ex84137081
ex84137089
ex84138100
ex84138200
ex84139100
ex84141025
ex84141081
ex84141089
ex84144010
ex84144090
ex84145920
ex84145940
ex84145980
ex84148011
ex84148019
ex84148059
ex84148073
ex84148075
ex84148078
ex84148080
ex84149000
ex84178030
ex84178050
ex84178070
ex84186900
ex84189910
ex84194000
ex84195000
ex84198910
ex84198930
ex84198998
ex84199085
ex84778093
ex84778099
ex84798200
ex84798997
ex84799080
(3) Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that could be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities.
ex84145100
ex84145900
ex84146000
ex84148080
ex84213920
ex84798997