Council Regulation (EU) 2016/2390 of 19 December 2016 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

In forceVersion 2016-12-19from 2016-12-30

Grade B

mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.

Ask Gelex about this law

Address https://gelex.eu/eli/EU/regulation/2016/2390@2016-12-19/en

Contents

Preamble
1. Article 1
2. Article 2
ANNEX
ANNEX

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) The Union production of 110 agricultural and industrial products that are not listed in the Annex to Council Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to suspend totally the autonomous Common Customs Tariff (CCT) duties on those products.

(2) It is necessary to modify the conditions for 38 suspensions of autonomous CCT duties, listed in the Annex to Regulation (EU) No 1387/2013, in order to take into account technical product developments and economic trends on the market. In relation to some measures in force, the classification was adapted in order to allow industry to fully benefit from the suspensions in force. Moreover, the Annex to Regulation (EU) No 1387/2013 was updated in order to take into account the need to align or clarify texts in some cases. The modified conditions relate to changes in the product description, classification, duty rates or end-use requirements. Moreover, in the light of the agreement in the form of the Declaration on the Expansion of Trade in Information Technology Products and the changes in the Combined Nomenclature set out in Commission Implementing Regulation (EU) 2016/1821, 441 items should be amended. The suspensions in respect of which modifications are necessary should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1387/2013, and the modified suspensions should be inserted into that list.

(3) It is also necessary, in the interest of the Union, to amend the end date for the mandatory review of 206 products listed in the Annex to Regulation (EU) No 1387/2013 in order to allow duty-free imports beyond that date. The autonomous CCT duty suspensions for those products have been reviewed and new revised dates should be set for their next mandatory review.

(4) It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for 18 of the products that are listed in the Annex to Regulation (EU) No 1387/2013. Moreover, according to the Communication from the Commission concerning autonomous tariff suspensions and quotas (the Commission Communication), for administrative and financial reasons, requests where the amount of uncollected customs duty is estimated to be less than EUR 15000 per year cannot be taken into consideration. The mandatory review of the existing suspensions has indicated that imports in relation to 71 suspensions do not reach that threshold. Those suspensions should therefore be deleted from that Annex. In addition, 27 suspensions should be deleted from that Annex as a result of the agreement in the form of the Declaration on the Expansion of Trade in Information Technology Products, which reduced the duty rate for the products concerned to zero.

(5) In the interests of clarity, and taking into account the number of amendments to be made, the Annex to Regulation (EU) No 1387/2013 should be replaced.

(6) Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(7) In order to avoid any interruption of the application of the autonomous suspensions scheme and to comply with the rules set out in the Commission Communication, the changes regarding the suspensions for the products concerned provided for in this Regulation have to apply from 1 January 2017. Therefore, this Regulation should enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union. It shall apply from 1 January 2017.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 19 December 2016. For the Council The President L. SÓLYMOS

ANNEX

CN code TARIC Description Rate of autonomous duty Supplementary unit Date foreseen for mandatory review ex07095910 10 Fresh or chilled chanterelles for treatment other than simple repacking for retail sale 0 % — 31.12.2020 ex07102100 10 Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals 0 % — 31.12.2018 ex07108095 50 Bamboo shoots, frozen, not put up for retail sale 0 % — 31.12.2018 ex07115900 11 Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry 0 % — 31.12.2021 ex07123200 ex07123300 ex07123900 10 10 31 Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale 0 % — 31.12.2018 ex08041000 30 Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries 0 % — 31.12.2018 ex08104050 10 Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture (excluding packing) of products of drink or food industries 0 % — 31.12.2018 08119050 08119070 ex08119095 70 Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter 0 % — 31.12.2018 ex08119095 20 Boysenberries, frozen, not containing added sugar, not put up for retail sale 0 % — 31.12.2018 ex08119095 30 Pineapple (Ananas comosus), in pieces, frozen 0 % — 31.12.2018 ex08119095 40 Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter 0 % — 31.12.2018 ex15119019 ex15119091 ex15131110 ex15131930 ex15132110 ex15132930 20 20 20 20 20 20 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: 0 % — 31.12.2017 ex15121910 10 Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of 0 % — 31.12.2020 ex15159099 92 Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid 0 % — 31.12.2018 ex15162096 20 Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process 0 % — 31.12.2019 ex15179099 10 Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO) 0 % — 31.12.2021 ex19019099 ex21069098 39 45 Preparation in powder form containing by weight: 0 % — 31.12.2018 ex19023010 ex19030000 10 20 Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale 0 % — 31.12.2018 ex20059100 10 Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg 0 % — 31.12.2018 ex20079950 ex20079950 81 91 Acerola puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 9 % — 31.12.2017 ex20079950 ex20079950 82 92 Acidified banana puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 11,5 % — 31.12.2017 ex20079950 ex20079950 ex20079993 83 93 10 Mango puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 6 % — 31.12.2017 ex20079950 ex20079950 84 94 Papaya puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 7,8 % — 31.12.2017 ex20079950 ex20079950 85 95 Guava puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 6 % — 31.12.2017 ex20089391 20 Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries 0 % — 31.12.2017 ex20089948 94 Mango puree: used in the manufacture of products of drink industry 6 % — 31.12.2020 ex20089949 ex20089999 30 40 Seedless boysenberry puree not containing added spirit, whether or not containing added sugar 0 % — 31.12.2019 ex20089949 ex20089999 70 11 Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: for use in the manufacture of stuffed vine leaves with rice 0 % — 31.12.2017 ex20089991 20 Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking 0 % — 31.12.2020 ex20094192 ex20094199 20 70 Pineapple juice: used in the manufacture of products of drink industry 8 % — 31.12.2020 ex20094930 91 Pineapple juice, other than in powder form: used in the manufacture of products of food or drink industry 0 % — 31.12.2019 ex20098131 10 Cranberry juice concentrate: 0 % — 31.12.2019 ex20098973 ex20098973 11 13 Passion fruit juice and passion fruit juice concentrate, whether or not frozen: for the use in the manufacture of products of food or drink industry 0 % — 31.12.2019 ex20098979 20 Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more 0 % — 31.12.2021 ex20098979 30 Frozen acerola juice concentrate: 0 % — 31.12.2018 ex20098979 85 Acai berry juice concentrate: in immediate packings of a content of 10 kg or more 0 % — 31.12.2021 ex20098997 ex20098997 21 29 Passion fruit juice and passion fruit juice concentrate, whether or not frozen: for the use in the manufacture of products of food or drink industry 0 % — 31.12.2019 ex20098999 96 Coconut water 0 % — 31.12.2021 ex21061020 20 Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form 0 % — 31.12.2018 ex21061020 30 Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate 0 % — 31.12.2018 ex21069092 45 Preparation containing by weight: standardised by weight to 3 % or more but not more than 4 % glabridin 0 % — 31.12.2021 ex25199010 10 Fused magnesia with a purity by weight of 94 % or more 0 % — 31.12.2021 ex27075000 ex27079980 20 10 Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 % 0 % — 31.12.2019 ex27079999 10 Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27 0 % — 31.12.2018 ex27101981 ex27101999 10 30 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: with a viscosity index of 80 or more 0 % — 31.12.2018 ex27101999 20 Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing: 0 % — 31.12.2019 ex28045090 10 Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % (CAS RN 13494-80-9) 0 % — 31.12.2018 28047000 Phosphorus 0 % — 31.12.2018 ex28051200 10 Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2) 0 % — 31.12.2020 ex28051990 20 Lithium metal of a purity by weight of 98,8 % or more (CAS RN 7439-93-2) 0 % — 31.12.2017 ex28053010 10 Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium 0 % — 31.12.2018 28053020 28053030 28053040 Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more 0 % — 31.12.2020 ex28111980 10 Sulphamidic acid (CAS RN 5329-14-6) 0 % — 31.12.2018 ex28111980 20 Hydrogen iodide (CAS RN 10034-85-2) 0 % — 31.12.2021 ex28111980 30 Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry 0 % — 31.12.2017 ex28112200 10 Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges 0 % — 31.12.2018 ex28112200 60 Calcined amorphous silicon dioxide powder 0 % — 31.12.2019 ex28112200 70 Amorphous silicon dioxide (CAS RN 60676-86-0), 0 % — 31.12.2020 ex28129000 10 Nitrogen trifluoride (CAS RN 7783-54-2) 0 % — 31.12.2018 ex28164000 10 Barium hydroxide (CAS RN 17194-00-2) 0 % — 31.12.2017 ex28181091 20 Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of: and with less than 50 % of the total weight having a particle size of more than 10 mm 0 % — 31.12.2020 ex28182000 10 Activated alumina with a specific surface area of at least 350 m2/g 0 % — 31.12.2019 ex28183000 20 Aluminium hydroxide (CAS RN 21645-51-2) 0 % — 31.12.2020 ex28183000 30 Aluminium hydroxide oxide (CAS RN 1318-23-6) in the form of boehmite or pseudoboehmite 0 % — 31.12.2018 ex28199090 10 Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy 0 % — 31.12.2021 ex28230000 10 Titanium dioxide (CAS RN 13463-67-7): 0 % — 31.12.2017 ex28230000 20 Titanium dioxide (CAS RN 13463-67-7) with a purity of 99,7 % or more and containing by weight: for use in the metallurgy 0 % — 31.12.2017 ex28251000 10 Hydroxylammonium chloride (CAS RN 5470-11-1) 0 % — 31.12.2017 28253000 Vanadium oxides and hydroxides 0 % — 31.12.2021 ex28255000 20 Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride 0 % — 31.12.2018 ex28255000 30 Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm 0 % — 31.12.2020 ex28256000 10 Zirconium dioxide (CAS RN 1314-23-4) 0 % — 31.12.2017 ex28257000 10 Molybdenum trioxide (CAS RN 1313-27-5) 0 % — 31.12.2021 ex28261990 10 Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more 0 % — 31.12.2020 ex28273985 10 Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 % 0 % — 31.12.2018 ex28273985 20 Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more 0 % — 31.12.2021 ex28273985 40 Barium chloride dihydrate (CAS RN 10326-27-9) 0 % — 31.12.2018 ex28274990 10 Hydrated zirconium dichloride oxide 0 % — 31.12.2018 ex28276000 10 Sodium iodide (CAS RN 7681-82-5) 0 % — 31.12.2019 ex28301000 10 Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight 0 % — 31.12.2018 ex28332980 20 Manganese sulphate monohydrate (CAS RN 10034-96-5) 0 % — 31.12.2018 ex28332980 30 Zirconium sulphate (CAS RN 14644-61-2) 0 % — 31.12.2020 ex28351000 10 Sodium hypophosphite monohydrate (CAS RN 10039-56-2) 0 % — 31.12.2017 ex28351000 20 Sodium hypophosphite (CAS RN 7681-53-0) 0 % — 31.12.2018 ex28369100 20 Lithium carbonate, containing one or more of the following impurities at the concentrations indicated: determined according to the methods specified in the European Pharmacopœia 0 % — 31.12.2018 ex28369917 30 Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more 0 % — 31.12.2018 ex28371900 20 Copper cyanide (CAS RN 544-92-3) 0 % — 31.12.2018 ex28372000 10 Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9) 0 % — 31.12.2021 ex28372000 20 Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5) 0 % — 31.12.2017 ex28391900 10 Disodium disilicate (CAS RN 13870-28-5) 0 % — 31.12.2017 ex28399000 20 Calcium silicate (CAS RN 1344-95-2) 0 % — 31.12.2018 ex28402090 10 Zinc borate (CAS RN 12767-90-7) 0 % — 31.12.2020 ex28417000 10 Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8) 0 % — 31.12.2018 ex28417000 20 Diammonium tridecaoxotetramolybdate(2-) (CAS RN 12207-64-6) 0 % — 31.12.2019 ex28417000 30 Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2) 0 % — 31.12.2019 ex28417000 40 Diammonium dimolybdate (CAS RN 27546-07-2) 0 % — 31.12.2021 ex28418000 10 Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5) 0 % — 31.12.2017 ex28419085 10 Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 % 0 % — 31.12.2017 ex28419085 20 Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more 0 % — 31.12.2018 ex28421000 10 Synthetic beta zeolite powder 0 % — 31.12.2018 ex28421000 20 Synthetic chabasite zeolite powder 0 % — 31.12.2019 ex28421000 40 Aluminophosphate-eighteen zeolite (CAS RN 1318-02-1) for use in the manufacture of catalytic preparations 0 % — 31.12.2021 ex28429010 10 Sodium selenate (CAS RN 13410-01-0) 0 % — 31.12.2019 28451000 Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0) 0 % — 31.12.2018 28459010 Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom) 0 % — 31.12.2018 ex28459090 10 Helium-3 (CAS RN 14762-55-1) 0 % — 31.12.2021 ex28459090 20 Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2) 0 % — 31.12.2018 ex28459090 30 (13C)Carbon monoxide (CAS RN 1641-69-6) 0 % — 31.12.2021 ex28459090 40 Iron boride enriched at a level of more than 95 % by weight with boron-10 (CAS RN 200513-39-9) 0 % — 31.12.2018 ex28461000 ex38249996 10 53 Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight 0 % — 31.12.2018 ex28461000 20 Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated 0 % — 31.12.2018 ex28461000 30 Cerium lanthanum carbonate, whether or not hydrated 0 % — 31.12.2018 28469010 28469020 28469030 28469090 Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 28461000 0 % — 31.12.2018 ex28500020 10 Silane (CAS RN 7803-62-5) 0 % — 31.12.2018 ex28500020 20 Arsine (CAS RN 7784-42-1) 0 % — 31.12.2018 ex28500020 30 Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm 0 % — 31.12.2017 ex28500020 40 Germanium tetrahydride (CAS RN 7782-65-2) 0 % — 31.12.2021 ex28500020 50 Sodium tetrahydroborate (CAS 16940-66-2) with: for use as an additive in the manufacture of oxygen barrier polymer articles 0 % — 31.12.2017 ex28500060 10 Sodium azide (CAS RN 26628-22-8) 0 % — 31.12.2018 ex28539090 20 Phosphine (CAS RN 7803-51-2) 0 % — 31.12.2018 ex29033919 10 1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0 % and containing not more than: 0 % — 31.12.2018 29033921 Difluoromethane (CAS RN 75-10-5) 0 % — 31.12.2020 ex29033924 10 Pentafluoroethane (CAS RN 354-33-6) 0 % — 31.12.2019 ex29033926 10 1,1,1,2-Tetrafluoroethane feedstock for pharmaceutical grade production conforming to the following specification: for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manufacturing Practice) for use in the manufacture of a propellant for medical aerosols whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS RN 811-97-2) 0 % — 31.12.2019 ex29033927 10 1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1) 0 % — 31.12.2018 ex29033928 10 Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0) 0 % — 31.12.2018 ex29033928 20 Perfluoroethane (CAS RN 76-16-4) 0 % — 31.12.2018 ex29033929 10 1H-Perfluorohexane (CAS RN 355-37-3) 0 % — 31.12.2018 29033931 2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1) 0 % — 31.12.2017 ex29033935 10 Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 1645-83-6) 0 % — 31.12.2018 ex29033939 10 Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0) 0 % — 31.12.2021 ex29033939 20 (Perfluorobutyl) ethylene (CAS RN 19430-93-4) 0 % — 31.12.2018 ex29033939 30 Hexafluoropropene (CAS RN 116-15-4) 0 % — 31.12.2021 ex29037400 10 2-Chloro-1,1-difluoroethane (CAS RN 338-65-8) 0 % — 31.12.2020 ex29037760 10 1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5) 0 % — 31.12.2018 ex29037790 10 Chlorotrifluoroethylene (CAS RN 79-38-9) 0 % — 31.12.2021 ex29037930 10 Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0) 0 % — 31.12.2019 ex29038980 10 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) 0 % — 31.12.2018 ex29038980 40 Hexabromocyclododecane 0 % — 31.12.2021 ex29038980 50 Chlorocyclopentane (CAS RN 930-28-9) 0 % — 31.12.2017 ex29039980 15 4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4) 0 % — 31.12.2020 ex29039980 20 1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9) 0 % — 31.12.2018 ex29039980 40 2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing: 0 % — 31.12.2018 ex29039980 50 Fluorobenzene (CAS RN 462-06-6) 0 % — 31.12.2018 ex29039980 75 3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7) 0 % — 31.12.2019 ex29039980 80 1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9) 0 % — 31.12.2018 ex29039980 85 2-Bromo-9H-fluorene (CAS RN 1133-80-8) 0 % — 31.12.2018 ex29041000 30 Sodium p-styrenesulphonate (CAS RN 2695-37-6) 0 % — 31.12.2019 ex29041000 50 Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8) 0 % — 31.12.2019 ex29042000 10 Nitromethane (CAS RN 75-52-5) 0 % — 31.12.2020 ex29042000 20 Nitroethane (CAS RN 79-24-3) 0 % — 31.12.2020 ex29042000 30 1-Nitropropane (CAS RN 108-03-2) 0 % — 31.12.2020 ex29042000 40 2-Nitropropane (CAS RN 79-46-9) 0 % — 31.12.2019 ex29049100 10 Trichloronitromethane (CAS RN 76-06-2), for the manufacture of goods of subheading 380892 0 % — 31.12.2019 ex29049900 20 1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7) 0 % — 31.12.2019 ex29049900 25 Difluoromethanesulphonyl chloride (CAS RN 1512-30-7) 0 % — 31.12.2020 ex29049900 30 Tosyl chloride (CAS RN 98-59-9) 0 % — 31.12.2019 ex29049900 35 1-Fluoro-4-nitrobenzene (CAS RN 350-46-9) 0 % — 31.12.2020 ex29049900 40 4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2) 0 % — 31.12.2017 ex29049900 50 Ethanesulphonyl chloride (CAS RN 594-44-5) 0 % — 31.12.2018 ex29049900 60 4,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS RN 128-42-7) 0 % — 31.12.2019 ex29049900 70 1-Chloro-4-nitrobenzene (CAS RN 100-00-5) 0 % — 31.12.2019 ex29049900 80 1-Chloro-2-nitrobenzene (CAS RN 88-73-3) 0 % — 31.12.2019 ex29051100 10 Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more 0 % — 31.12.2018 ex29051100 20 Methyl methanesulphonate (CAS RN 66-27-3) 0 % — 31.12.2021 ex29051900 11 Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN 0 % — 31.12.2018 ex29051900 20 Butyltitanate monohydrate, homopolymer (CAS RN162303-51-7) 0 % — 31.12.2018 ex29051900 25 Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6) 0 % — 31.12.2018 ex29051900 30 2,6-Dimethylheptan-4-ol (CAS RN 108-82-7) 0 % — 31.12.2018 ex29051900 40 2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7) 0 % — 31.12.2019 ex29051900 70 Titanium tetrabutanolate (CAS RN 5593-70-4) 0 % — 31.12.2017 ex29051900 80 Titanium tetraisopropoxide (CAS RN 546-68-9) 0 % — 31.12.2017 ex29051900 85 Titanium tetraethanolate (CAS RN 3087-36-3) 0 % — 31.12.2018 ex29052200 10 Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0) 0 % — 31.12.2019 ex29053995 10 Propane-1,3-diol (CAS RN 504-63-2) 0 % — 31.12.2020 ex29053995 20 Butane-1,2-diol (CAS RN 584-03-2) 0 % — 31.12.2017 ex29053995 30 2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7) 0 % — 31.12.2021 ex29053995 40 Decane-1,10-diol (CAS RN 112-47-0) 0 % — 31.12.2017 ex29053995 50 2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2) 0 % — 31.12.2018 ex29054900 10 Ethylidynetrimethanol (CAS RN 77-85-0) 0 % — 31.12.2020 ex29055998 20 2,2,2-Trifluoroethanol (CAS RN 75-89-8) 0 % — 31.12.2019 ex29061900 10 Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8) 0 % — 31.12.2018 ex29061900 20 4,4'-Isopropylidenedicyclohexanol (CAS RN 80-04-6) 0 % — 31.12.2018 ex29061900 50 4-tert-Butylcyclohexanol (CAS RN 98-52-2) 0 % — 31.12.2019 ex29062900 20 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7) 0 % — 31.12.2018 ex29062900 30 2-Phenylethanol (CAS RN 60-12-8) 0 % — 31.12.2017 ex29062900 40 2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0) 0 % — 31.12.2020 ex29071200 20 Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more 0 % — 31.12.2019 ex29071200 30 p-Cresol (CAS RN 106-44-5) 0 % — 31.12.2019 ex29071590 10 2-Naphthol (CAS RN 135-19-3) 0 % — 31.12.2021 ex29071910 10 2,6-Xylenol (CAS RN 576-26-1) 0 % — 31.12.2019 ex29071990 20 Biphenyl-4-ol (CAS RN 92-69-3) 0 % — 31.12.2018 ex29072100 10 Resorcinol (CAS RN 108-46-3) 0 % — 31.12.2018 ex29072900 15 6,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9) 0 % — 31.12.2018 ex29072900 20 4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4) 0 % — 31.12.2018 ex29072900 25 4-Hydroxybenzyl alcohol (CAS RN 623-05-2) 0 % — 31.12.2019 ex29072900 30 4,4',4'-Ethylidynetriphenol (CAS RN 27955-94-8) 0 % — 31.12.2018 ex29072900 45 2-Methylhydroquinone (CAS RN 95-71-6) 0 % — 31.12.2021 ex29072900 50 6,6',6'-Tricyclohexyl-4,4',4'-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0) 0 % — 31.12.2018 ex29072900 55 Biphenyl-2,2'-diol (CAS RN 1806-29-7) 0 % — 31.12.2017 ex29072900 65 2,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8) 0 % — 31.12.2019 ex29072900 70 2,2',2’,6,6',6'-Hexa-tert-butyl-α,α’,α’-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2) 0 % — 31.12.2018 ex29072900 85 Phloroglucinol whether or not hydrated 0 % — 31.12.2018 ex29081900 10 Pentafluorophenol (CAS RN 771-61-9) 0 % — 31.12.2018 ex29081900 20 4,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) 0 % — 31.12.2018 ex29081900 30 4-Chlorophenol (CAS RN 106-48-9) 0 % — 31.12.2019 ex29081900 40 3,4,5-Trifluorophenol (CAS RN 99627-05-1) 0 % — 31.12.2020 ex29081900 50 4-Fluorophenol (CAS RN 371-41-5) 0 % — 31.12.2020 ex29089900 30 4-Nitrophenol (CAS RN 100-02-7) 0 % — 31.12.2018 ex29089900 40 4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4) 0 % — 31.12.2017 ex29091990 20 Bis(2-chloroethyl) ether (CAS RN 111-44-4) 0 % — 31.12.2018 ex29091990 30 Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more 0 % — 31.12.2018 ex29091990 50 3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9) 0 % — 31.12.2021 ex29091990 60 1-Methoxyheptafluoropropane (CAS RN 375-03-1) 0 % — 31.12.2018 ex29092000 10 8-Methoxycedrane (CAS RN 19870-74-7) 0 % — 31.12.2021 ex29093038 10 Bis(pentabromophenyl) ether (CAS RN 1163-19-5) 0 % — 31.12.2018 ex29093038 20 1,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2) 0 % — 31.12.2021 ex29093038 30 1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7) 0 % — 31.12.2020 ex29093090 10 2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7) 0 % — 31.12.2019 ex29093090 20 1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1) 0 % — 31.12.2019 ex29093090 30 3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) 0 % — 31.12.2020 ex29093090 40 1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7) 0 % — 31.12.2020 ex29093090 50 1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6) 0 % — 31.12.2020 ex29093090 60 1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2) 0 % — 31.12.2020 ex29093090 70 O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8) 0 % — 31.12.2021 ex29093090 80 Oxyfluorfen (ISO) (CAS RN 42874-03-3) with a purity by weight of 97 % or more 0 % — 31.12.2021 ex29094980 10 1-Propoxypropan-2-ol (CAS RN 1569-01-3) 0 % — 31.12.2020 ex29095000 10 4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9) 0 % — 31.12.2018 ex29095000 20 Ubiquinol (CAS RN 992-78-9) 0 % — 31.12.2020 ex29096000 10 Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3) 0 % — 31.12.2018 ex29096000 20 1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3) 0 % — 31.12.2017 ex29096000 30 3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons 0 % — 31.12.2019 ex29109000 15 1,2-Epoxycyclohexane (CAS RN 286-20-4) 0 % — 31.12.2018 ex29109000 20 2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4) 0 % — 31.12.2018 ex29109000 30 2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5) 0 % — 31.12.2018 ex29109000 50 2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1) 0 % — 31.12.2020 ex29109000 80 Allyl glycidyl ether (CAS RN 106-92-3) 0 % — 31.12.2021 ex29110000 10 Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2) 0 % — 31.12.2020 ex29122900 15 2,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0) 0 % — 31.12.2021 ex29122900 25 Mixture of isomers consisting of: 0 % — 31.12.2021 ex29122900 50 4-Isobutylbenzaldehyde (CAS RN 40150-98-9) 0 % — 31.12.2017 ex29122900 60 3,4-Dimethylbenzaldehyde (CAS RN 5973-71-7) 0 % — 31.12.2018 ex29122900 70 4-tert-Butylbenzaldehyde (CAS RN 939-97-9) 0 % — 31.12.2018 ex29122900 80 4-Isopropylbenzaldehyde (CAS RN 122-03-2) 0 % — 31.12.2018 ex29124900 10 3-Phenoxybenzaldehyde (CAS RN 39515-51-0) 0 % — 31.12.2018 ex29124900 20 4-Hydroxybenzaldehyde (CAS RN 123-08-0) 0 % — 31.12.2017 ex29124900 30 Salicylaldehyde (CAS RN 90-02-8) 0 % — 31.12.2020 ex29124900 40 3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0) 0 % — 31.12.2020 ex29141990 20 Heptan-2-one (CAS RN 110-43-0) 0 % — 31.12.2017 ex29141990 30 3-Methylbutanone (CAS RN 563-80-4) 0 % — 31.12.2017 ex29141990 40 Pentan-2-one (CAS RN 107-87-9) 0 % — 31.12.2017 ex29142900 20 Cyclohexadec-8-enone (CAS RN 3100-36–5) 0 % — 31.12.2018 ex29142900 30 (R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) 0 % — 31.12.2020 ex29142900 40 Camphor 0 % — 31.12.2018 ex29142900 50 trans-β-Damascone (CAS RN 23726-91-2) 0 % — 31.12.2021 ex29143900 15 2,6-Dimethyl-1-indanone (CAS RN 66309-83-9) 0 % — 31.12.2019 ex29143900 25 1,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7) 0 % — 31.12.2019 ex29143900 30 Benzophenone (CAS RN 119-61-9) 0 % — 31.12.2017 ex29143900 50 4-Phenylbenzophenone (CAS RN 2128-93-0) 0 % — 31.12.2018 ex29143900 60 4-Methylbenzophenone (CAS RN 134-84-9) 0 % — 31.12.2018 ex29143900 70 Benzil (CAS RN 134-81-6) 0 % — 31.12.2017 ex29143900 80 4'-Methylacetophenone (CAS RN 122-00-9) 0 % — 31.12.2017 ex29145000 20 3'-Hydroxyacetophenone (CAS RN 121-71-1) 0 % — 31.12.2020 ex29145000 25 4'-Methoxyacetophenone (CAS RN 100-06-1) 0 % — 31.12.2018 ex29145000 30 2'-Hydroxyacetophenone (CAS RN 118-93-4) 0 % — 31.12.2018 ex29145000 36 2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5) 0 % — 31.12.2018 ex29145000 40 4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2) 0 % — 31.12.2021 ex29145000 45 3,4-Dihydroxybenzophenone (CAS RN 10425-11-3) 0 % — 31.12.2017 ex29145000 55 2,2',4,4'-Tetrahydroxybenzophenone (CAS RN 131-55-5) 0 % — 31.12.2018 ex29145000 60 2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8) 0 % — 31.12.2017 ex29145000 65 3-Methoxyacetophenone (CAS RN 586-37-8) 0 % — 31.12.2020 ex29145000 70 16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2) 0 % — 31.12.2017 ex29145000 75 7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7) 0 % — 31.12.2020 ex29145000 80 2',6'-Dihydroxyacetophenone (CAS RN 699-83-2) 0 % — 31.12.2018 ex29145000 85 4,4'- Dihydroxybenzophenone (CAS RN 611-99-4) 0 % — 31.12.2021 ex29146980 10 2-Ethylanthraquinone (CAS RN 84-51-5) 0 % — 31.12.2018 ex29146980 20 2-Pentylanthraquinone (CAS RN 13936-21-5) 0 % — 31.12.2019 ex29146980 30 1,4-Dihydroxyanthraquinone (CAS RN 81-64-1) 0 % — 31.12.2018 ex29146980 40 p-Benzoquinone (CAS RN 106-51-4) 0 % — 31.12.2021 ex29146980 50 Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8) 0 % — 31.12.2019 ex29147900 15 1-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione (CAS RN 720-94-5) 0 % — 31.12.2020 ex29147900 20 2,4'-Difluorobenzophenone (CAS RN 342-25-6) 0 % — 31.12.2017 ex29147900 25 1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS RN 1378387-81-5) 0 % — 31.12.2020 ex29147900 40 Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8) 0 % — 31.12.2018 ex29147900 50 3'-Chloropropiophenone (CAS RN 34841-35-5) 0 % — 31.12.2018 ex29147900 60 4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1) 0 % — 31.12.2020 ex29147900 65 1,4-bis(4-Fluorobenzoyl) Benzene (CAS RN 68418-51-9) 0 % — 31.12.2021 ex29147900 70 4-Chloro-4'-hydroxybenzophenone (CAS RN 42019-78-3) 0 % — 31.12.2021 ex29147900 75 4,4'-Difluorobenzophenone (CAS RN 345-92-6) 0 % — 31.12.2021 ex29147900 80 Tetrachloro-p-benzoquinone (CAS RN 118-75-2) 0 % — 31.12.2018 ex29152900 10 Antimony triacetate (CAS RN 6923-52-0) 0 % — 31.12.2018 ex29153900 25 2-Methylcyclohexyl acetate (CAS RN 5726-19-2) 0 % — 31.12.2018 ex29153900 40 tert-Butyl acetate (CAS RN 540-88-5) 0 % — 31.12.2018 ex29153900 50 3-Acetylphenyl acetate (CAS RN 2454-35-5) 0 % — 31.12.2019 ex29153900 60 Dodec-8-enyl acetate (CAS RN 28079-04-1) 0 % — 31.12.2020 ex29153900 65 Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) 0 % — 31.12.2020 ex29153900 70 Dodec-9-enyl acetate (CAS RN 16974-11-1) 0 % — 31.12.2020 ex29153900 75 Isobornyl acetate (CAS RN 125-12-2) 0 % — 31.12.2021 ex29153900 80 1-Phenylethyl acetate (CAS RN 93-92-5) 0 % — 31.12.2021 ex29153900 85 2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5) 0 % — 31.12.2018 ex29156019 10 Ethyl butyrate (CAS RN 105-54-4) 0 % — 31.12.2017 ex29159070 30 3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) 0 % — 31.12.2017 ex29159070 45 Trimethyl orthoformate (CAS RN 149-73-5) 0 % — 31.12.2019 ex29159070 50 Allyl heptanoate (CAS RN 142-19-8) 0 % — 31.12.2019 ex29159070 55 Triethyl orthoformate (CAS RN 122-51-0) 0 % — 31.12.2018 ex29159070 60 Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) 0 % — 31.12.2020 ex29159070 65 2-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3) 0 % — 31.12.2020 ex29159070 75 2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9) 0 % — 31.12.2017 ex29159070 80 Ethyl difluoroacetate (CAS RN 454-31-9) 0 % — 31.12.2021 ex29161200 10 2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6) 0 % — 31.12.2018 ex29161200 40 2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2) 0 % — 31.12.2018 ex29161200 70 2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3) 0 % — 31.12.2017 ex29161300 10 Hydroxyzinc methacrylate powder (CAS RN 63451-47-8) 0 % — 31.12.2020 ex29161300 20 Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9) 0 % — 31.12.2018 ex29161400 10 2,3-Epoxypropyl methacrylate (CAS RN 106-91-2) 0 % — 31.12.2018 ex29161400 20 Ethyl methacrylate (CAS RN 97-63-2) 0 % — 31.12.2018 ex29161400 30 Allyl methacrylate (CAS RN 96-05-9) and its’ isomers with a purity by weight of 98 % or more and containing at least: 0 % — 31.12.2020 ex29161995 20 Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1) 0 % — 31.12.2018 ex29161995 40 Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds 0 % — 31.12.2018 ex29161995 50 Methyl 2-fluoroacrylate (CAS RN 2343-89-7) 0 % — 31.12.2019 ex29162000 15 Transfluthrin (ISO) (CAS RN 118712-89-3) 0 % — 31.12.2021 ex29162000 50 Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6) 0 % — 31.12.2018 ex29162000 60 3-Cyclohexylpropionic acid (CAS RN 701-97-3) 0 % — 31.12.2020 ex29163100 10 Benzyl benzoate (CAS RN 120-51-4) 0 % — 31.12.2021 ex29163990 13 3,5-Dinitrobenzoic acid (CAS RN 99-34-3) 0 % — 31.12.2019 ex29163990 15 2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3) 0 % — 31.12.2021 ex29163990 18 2,4-Dichlorophenylacetic acid (CAS RN 19719-28-9) 0 % — 31.12.2019 ex29163990 20 3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6) 0 % — 31.12.2018 ex29163990 23 (2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6) 0 % — 31.12.2019 ex29163990 25 2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8) 0 % — 31.12.2021 ex29163990 30 2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) 0 % — 31.12.2020 ex29163990 35 Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9) 0 % — 31.12.2018 ex29163990 38 6-Bromonaphthalene-2-carboxylic acid (CAS RN 5773-80-8) 0 % — 31.12.2018 ex29163990 41 4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8) 0 % — 31.12.2020 ex29163990 48 3-Fluorobenzoyl chloride (CAS RN 1711-07-5) 0 % — 31.12.2018 ex29163990 50 3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1) 0 % — 31.12.2018 ex29163990 51 3-Chloro-2-fluorobenzoic acid (CAS RN 161957-55-7) 0 % — 31.12.2020 ex29163990 53 5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0) 0 % — 31.12.2020 ex29163990 55 4-tert-Butylbenzoic acid (CAS RN 98-73-7) 0 % — 31.12.2017 ex29163990 60 4-Ethylbenzoyl chloride (CAS RN 16331-45-6) 0 % — 31.12.2018 ex29163990 61 2-Phenylbutyric Acid (CAS RN 90-27-7) 0 % — 31.12.2020 ex29163990 70 Ibuprofen (INN) (CAS RN 15687-27-1) 0 % — 31.12.2018 ex29163990 75 m-Toluic acid (CAS RN 99-04-7) 0 % — 31.12.2017 ex29163990 85 (2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0) 0 % — 31.12.2017 ex29171100 20 Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1) 0 % — 31.12.2018 ex29171100 30 Cobalt oxalate (CAS RN 814-89-1) 0 % — 31.12.2019 ex29171910 10 Dimethyl malonate (CAS RN 108-59-8) 0 % — 31.12.2019 ex29171910 20 Diethyl malonate (CAS RN 105-53-3) 0 % — 31.12.2017 ex29171980 15 Dimethyl but-2-ynedioate (CAS RN 762-42-5) 0 % — 31.12.2018 ex29171980 20 Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate (CAS RN 23386-52-9) 0 % — 31.12.2018 ex29171980 30 Ethylene brassylate (CAS RN 105-95-3) 0 % — 31.12.2019 ex29171980 50 Tetradecanedioic acid (CAS RN 821-38-5) 0 % — 31.12.2020 ex29171980 70 Itaconic acid (CAS RN 97-65-4) 0 % — 31.12.2018 ex29172000 30 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5) 0 % — 31.12.2018 ex29172000 40 3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6) 0 % — 31.12.2018 ex29173400 10 Diallyl phthalate (CAS RN 131-17-9) 0 % — 31.12.2018 ex29173995 20 Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) 0 % — 31.12.2020 ex29173995 25 Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5) 0 % — 31.12.2020 ex29173995 30 Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) 0 % — 31.12.2020 ex29173995 35 1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8) 0 % — 31.12.2020 ex29173995 40 Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5) 0 % — 31.12.2018 ex29173995 50 1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4) 0 % — 31.12.2019 ex29173995 60 Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8) 0 % — 31.12.2019 ex29173995 70 1,2,4-Benzenetricarboxylic acid, 1,2,4-trioctyl ester (CAS RN 89-04-3) with a purity by weight of more than 96 % 0 % — 31.12.2020 ex29181600 20 Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5) 0 % — 31.12.2018 ex29181930 10 Cholic acid (CAS RN 81-25-4) 0 % — 31.12.2019 ex29181930 20 3-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3) 0 % — 31.12.2019 ex29181998 20 L-Malic acid (CAS RN 97-67-6) 0 % — 31.12.2018 ex29182900 10 Monohydroxynaphthoic acids 0 % — 31.12.2018 ex29182900 35 Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9) 0 % — 31.12.2017 ex29182900 50 Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) 0 % — 31.12.2018 ex29182900 60 Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3) 0 % — 31.12.2021 ex29182900 70 3,5-Diiodosalicylic acid (CAS RN 133-91-5) 0 % — 31.12.2019 ex29183000 30 Methyl-2-benzoylbenzoate (CAS RN 606-28-0) 0 % — 31.12.2018 ex29183000 50 Ethyl acetoacetate (CAS RN 141-97-9) 0 % — 31.12.2017 ex29183000 60 4-Oxovaleric acid (CAS RN 123-76-2) 0 % — 31.12.2019 ex29183000 70 2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1) 0 % — 31.12.2019 ex29183000 80 Methyl benzoylformate (CAS RN 15206-55-0) 0 % — 31.12.2021 ex29189990 10 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0) 0 % — 31.12.2018 ex29189990 13 3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0) 0 % — 31.12.2020 ex29189990 15 Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8) 0 % — 31.12.2017 ex29189990 18 Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9) 0 % — 31.12.2020 ex29189990 20 Methyl 3-methoxyacrylate (CAS RN 5788-17-0) 0 % — 31.12.2019 ex29189990 23 1,8-Dihydroxyanthraquinone-3-carboxylic acid (CAS RN 478-43-3) 0 % — 31.12.2021 ex29189990 25 Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0) 0 % — 31.12.2018 ex29189990 30 Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2) 0 % — 31.12.2018 ex29189990 35 p-Anisic acid (CAS RN 100-09-4) 0 % — 31.12.2019 ex29189990 40 trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6) 0 % — 31.12.2018 ex29189990 45 4-Methylcatechol dimethyl acetate (CAS RN 52589-39-6) 0 % — 31.12.2019 ex29189990 50 Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0) 0 % — 31.12.2018 ex29189990 55 Stearyl glycyrrhetinate(CAS RN 13832-70-7) 0 % — 31.12.2019 ex29189990 60 3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2) 0 % — 31.12.2018 ex29189990 65 Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0) 0 % — 31.12.2019 ex29189990 70 Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8) 0 % — 31.12.2019 ex29189990 75 3,4-Dimethoxybenzoic acid (CAS RN 93-07-2) 0 % — 31.12.2019 ex29189990 80 Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9) 0 % — 31.12.2021 ex29189990 85 Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more 0 % — 31.12.2020 ex29199000 10 2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) 0 % — 31.12.2018 ex29199000 30 Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5) 0 % — 31.12.2018 ex29199000 40 Tri-n-hexylphosphate (CAS RN 2528-39-4) 0 % — 31.12.2018 ex29199000 50 Triethyl phosphate (CAS RN 78-40-0) 0 % — 31.12.2021 ex29199000 60 Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) 0 % — 31.12.2018 ex29199000 70 Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3) 0 % — 31.12.2019 ex29201900 10 Fenitrothion (ISO) (CAS RN 122-14-5) 0 % — 31.12.2018 ex29201900 20 Tolclofos-methyl (ISO) (CAS RN 57018-04-9) 0 % — 31.12.2018 ex29201900 30 2,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide (CAS RN 4090-51-1) 0 % — 31.12.2019 29202300 Trimethyl phosphite (CAS RN 121-45-9) 0 % — 31.12.2018 29202400 Triethyl phosphite (CAS RN 122-52-1) 0 % — 31.12.2021 ex29202900 10 O,O’-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6) 0 % — 31.12.2018 ex29202900 20 Tris(methylphenyl)phosphite (CAS RN 25586-42-9) 0 % — 31.12.2020 ex29202900 30 2,2'-[[3,3',5,5'-Tetrakis(1,1-dimethylethyl)[1,1'-biphenyl]-2,2'-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2) 0 % — 31.12.2020 ex29202900 40 Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) 0 % — 31.12.2020 ex29209010 10 Diethyl sulphate (CAS RN 64-67-5) 0 % — 31.12.2018 ex29209010 20 Diallyl 2,2'-oxydiethyl dicarbonate (CAS RN 142-22-3) 0 % — 31.12.2018 ex29209010 40 Dimethyl carbonate (CAS RN 616-38-6) 0 % — 31.12.2018 ex29209010 50 Di-tert-butyl dicarbonate (CAS RN 24424-99-5) 0 % — 31.12.2018 ex29209010 60 2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) 0 % — 31.12.2017 ex29209010 80 Sodium 2-[2-(2-tridecoxyethoxy)ethoxy]ethyl sulphate (CAS RN 25446-78-0) in the form of a liquid paste with a content by weight in water of 62 % or more but not more than 65 % 0 % — 31.12.2021 ex29209070 40 Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides 0 % — 31.12.2021 ex29209070 50 Fosetyl-aluminium (CAS RN 39148-24-8) 0 % — 31.12.2018 ex29209070 60 Bis(neopentylglycolato)diboron (CAS RN 201733-56-4) 0 % — 31.12.2018 ex29209070 80 Bis(pinacolato)diboron (CAS RN 73183-34-3) 0 % — 31.12.2020 29211300 2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9) 0 % — 31.12.2017 ex29211950 ex29299000 10 20 Diethylamino-triethoxysilane (CAS RN 35077-00-0) 0 % — 31.12.2019 ex29211999 20 Ethyl(2-methylallyl)amine (CAS RN 18328-90-0) 0 % — 31.12.2018 ex29211999 30 Allylamine (CAS RN 107-11-9) 0 % — 31.12.2018 ex29211999 45 2-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7) 0 % — 31.12.2021 ex29211999 60 Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN 175923-04-3) 0 % — 31.12.2018 ex29211999 70 N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8) 0 % — 31.12.2017 ex29211999 80 Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8) 0 % — 31.12.2019 ex29212900 20 Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0) 0 % — 31.12.2018 ex29212900 30 Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1) 0 % — 31.12.2018 ex29212900 40 Decamethylenediamine (CAS RN 646-25-3) 0 % — 31.12.2020 ex29212900 50 N’-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4) 0 % — 31.12.2021 ex29213099 30 1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6) 0 % — 31.12.2020 ex29213099 40 Cyclopropylamin (CAS RN 765-30-0) 0 % — 31.12.2017 ex29214200 15 4-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2) 0 % — 31.12.2018 ex29214200 20 3-Chloroaniline (CAS RN 108-42-9) 0 % — 31.12.2018 ex29214200 25 Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5) 0 % — 31.12.2018 ex29214200 30 4-Nitroaniline (CAS RN 100-01-6) 0 % — 31.12.2018 ex29214200 33 2-Fluoroaniline (CAS RN 348-54-9) 0 % — 31.12.2020 ex29214200 35 2-Nitroaniline (CAS RN 88-74-4) 0 % — 31.12.2018 ex29214200 40 Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0 or 6106-22-5) 0 % — 31.12.2019 ex29214200 45 2,4,5-Trichloroaniline (CAS RN 636-30-6) 0 % — 31.12.2018 ex29214200 50 3-Aminobenzenesulfonic acid (CAS RN 121-47-1) 0 % — 31.12.2018 ex29214200 70 2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2) 0 % — 31.12.2019 ex29214200 80 4-Chloro-2-nitroaniline (CAS RN 89-63-4) 0 % — 31.12.2018 ex29214200 85 3,5-Dichloroaniline (CAS RN 626-43-7) 0 % — 31.12.2018 ex29214200 86 2,5-Dichloroaniline (CAS RN 95-82-9) 0 % — 31.12.2017 ex29214200 87 N-Methylaniline (CAS RN 100-61-8) 0 % — 31.12.2017 ex29214200 88 3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0) 0 % — 31.12.2017 ex29214300 20 4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7) 0 % — 31.12.2018 ex29214300 30 3-Nitro-p-toluidine (CAS RN 119-32-4) 0 % — 31.12.2018 ex29214300 40 4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8) 0 % — 31.12.2018 ex29214300 50 4-Aminobenzotrifluoride (CAS RN 455-14-1) 0 % — 31.12.2020 ex29214300 60 3-Aminobenzotrifluoride (CAS RN 98-16-8) 0 % — 31.12.2020 ex29214300 80 6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) 0 % — 31.12.2017 ex29214400 20 Diphenylamine (CAS RN 122-39-4) 0 % — 31.12.2018 ex29214500 20 2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6) 0 % — 31.12.2018 ex29214500 50 7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6) 0 % — 31.12.2018 ex29214900 20 Pendimethalin (ISO) (CAS RN 40487-42-1) 3,5 % — 31.12.2018 ex29214900 40 N-1-Naphthylaniline (CAS RN 90-30-2) 0 % — 31.12.2018 ex29214900 50 3,4-Xylidine (CAS RN 95-64-7) 0 % — 31.12.2018 ex29214900 60 2,6-Diisopropylaniline (CAS RN 24544-04-5) 0 % — 31.12.2020 ex29214900 80 4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5) 0 % — 31.12.2020 ex29214900 85 4-Isopropylaniline (CAS RN 99-88-7) 0 % — 31.12.2017 ex29215119 20 Toluene diamine (TDA), containing by weight: whether or not containing 7 % or less of water 0 % — 31.12.2018 ex29215119 30 2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9) 0 % — 31.12.2018 ex29215119 40 p-Phenylenediamine (CAS RN 106-50-3) 0 % — 31.12.2021 ex29215119 50 Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene 0 % — 31.12.2019 ex29215119 60 2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1) 0 % — 31.12.2018 ex29215119 70 4-Bromo- 1,2-diaminobenzene (CAS RN 1575-37-7) 0 % — 31.12.2020 ex29215990 10 Mixture of isomers of 3,5-diethyltoluenediamine 0 % — 31.12.2018 ex29215990 30 3,3'-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) 0 % — 31.12.2017 ex29215990 40 4,4'-Diaminostilbene-2,2'-disulphonic acid (CAS RN 81-11-8) 0 % — 31.12.2018 ex29215990 60 (2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8) 0 % — 31.12.2017 ex29215990 70 Tris(4-aminophenyl)methane (CAS RN 548-61-8) 0 % — 31.12.2020 ex29221900 20 2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9) 0 % — 31.12.2017 ex29221900 25 Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2) 0 % — 31.12.2017 ex29221900 30 N,N,N’,N’-Tetramethyl-2,2'-oxybis(ethylamine) (CAS RN 3033-62-3) 0 % — 31.12.2018 ex29221900 35 2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7) 0 % — 31.12.2020 ex29221900 50 2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0) 0 % — 31.12.2018 ex29221900 60 N,N,N’-trimethyl-N’-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine), (CAS RN 83016-70-0) 0 % — 31.12.2018 ex29221900 65 trans-4-Aminocyclohexanol (CAS RN 27489-62-9) 0 % — 31.12.2018 ex29221900 75 2-Ethoxyethylamine (CAS RN 110-76-9) 0 % — 31.12.2018 ex29221900 80 N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3) 0 % — 31.12.2019 ex29221900 85 (1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0) 0 % — 31.12.2018 ex29222100 10 2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2) 0 % — 31.12.2018 ex29222100 30 6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7) 0 % — 31.12.2019 ex29222100 40 7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5) 0 % — 31.12.2018 ex29222100 50 Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3) 0 % — 31.12.2019 ex29222100 60 4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0) 0 % — 31.12.2018 ex29222900 20 3-Aminophenol (CAS RN 591-27-5) 0 % — 31.12.2018 ex29222900 25 5-Amino-o-cresol (CAS RN 2835-95-2) 0 % — 31.12.2018 ex29222900 30 1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4) 0 % — 31.12.2020 ex29222900 40 4-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS RN 25251-42-7) 0 % — 31.12.2020 ex29222900 45 Anisidines 0 % — 31.12.2018 ex29222900 63 Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more 0 % — 31.12.2020 ex29222900 65 4-Trifluoromethoxyaniline (CAS RN 461-82-5) 0 % — 31.12.2019 ex29222900 70 4-Nitro-o-anisidine (CAS RN 97-52-9) 0 % — 31.12.2018 ex29222900 73 Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4) 0 % — 31.12.2021 ex29222900 75 4-(2-Aminoethyl)phenol (CAS RN 51-67-2) 0 % — 31.12.2020 ex29222900 80 3-Diethylaminophenol (CAS RN 91-68-9) 0 % — 31.12.2018 ex29222900 85 4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6) 0 % — 31.12.2018 ex29223900 10 1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts 0 % — 31.12.2018 ex29223900 20 2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) 0 % — 31.12.2020 ex29223900 25 3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5) 0 % — 31.12.2020 ex29223900 35 5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5) 0 % — 31.12.2020 ex29224300 10 Anthranilic acid (CAS RN 118-92-3) 0 % — 31.12.2018 ex29224985 10 Ornithine aspartate (INNM) (CAS RN 3230-94-2) 0 % — 31.12.2018 ex29224985 20 3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0) 0 % — 31.12.2017 ex29224985 25 Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6) 0 % — 31.12.2019 ex29224985 30 Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8) 0 % — 31.12.2020 ex29224985 35 2- (3-Amino-4-chloro-benzoyl) benzoic acid (CAS RN 118-04-7) 0 % — 31.12.2021 ex29224985 40 Norvaline 0 % — 31.12.2018 ex29224985 45 Glycine (CAS RN 56-40-6) 0 % — 31.12.2020 ex29224985 50 D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9) 0 % — 31.12.2019 ex29224985 55 (E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CUS 0138070-7) 0 % — 31.12.2019 ex29224985 60 Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3) 0 % — 31.12.2017 ex29224985 65 Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6) 0 % — 31.12.2020 ex29224985 70 2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3) 0 % — 31.12.2018 ex29224985 80 12-Aminododecanoic acid (CAS RN 693-57-2) 0 % — 31.12.2018 ex29225000 10 2-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4) 0 % — 31.12.2021 ex29225000 20 1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9) 0 % — 31.12.2019 ex29225000 70 2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate 0 % — 31.12.2018 ex29231000 10 Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2) 0 % — 31.12.2019 ex29239000 10 Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide 0 % — 31.12.2018 ex29239000 20 Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7) 0 % — 31.12.2019 ex29239000 25 Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3) 0 % — 31.12.2018 ex29239000 55 Tetrabutylammonium bromide (CAS RN 1643-19-2) 0 % — 31.12.2021 ex29239000 70 Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: 0 % — 31.12.2018 ex29239000 75 Tetraethylammonium hydroxide, in the form of an aqueous solution containing: 0 % — 31.12.2020 ex29239000 80 Diallyldimethylammonium chloride (CAS RN 7398-69-8), in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride 0 % — 31.12.2018 ex29239000 85 N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9) 0 % — 31.12.2019 ex29241900 10 2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9) 0 % — 31.12.2018 ex29241900 15 N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6) 0 % — 31.12.2019 ex29241900 20 (R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic acid (CAS RN 181289-33-8) 0 % — 31.12.2020 ex29241900 30 Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0) 0 % — 31.12.2018 ex29241900 35 Acetamide (CAS RN 60-35-5) 0 % — 31.12.2019 ex29241900 45 3-Chloro-N-methoxy-N-methylpropanamide (CAS RN 1062512-53-1) 0 % — 31.12.2021 ex29241900 50 Acrylamide (CAS RN 79-06-1) 0 % — 31.12.2018 ex29241900 55 2-Propynyl butylcarbamate (CAS RN 76114-73-3) 0 % — 31.12.2021 ex29241900 60 N,N-Dimethylacrylamide (CAS RN 2680-03-7) 0 % — 31.12.2021 ex29241900 70 Methylcarbamate (CAS RN 598-55-0) 0 % — 31.12.2018 ex29241900 80 Tetrabutylurea (CAS RN 4559-86-8) 0 % — 31.12.2017 ex29242100 10 4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts 0 % — 31.12.2018 ex29242100 20 (3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9) 0 % — 31.12.2018 29242500 Alachlor (ISO), (CAS RN 15972-60-8) 0 % — 31.12.2018 ex29242970 12 4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2) 0 % — 31.12.2018 ex29242970 15 Acetochlor (ISO), (CAS RN 34256-82-1) 0 % — 31.12.2018 ex29242970 17 2-(Trifluoromethyl)benzamide (CAS RN 360-64-5) 0 % — 31.12.2019 ex29242970 19 2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8) 0 % — 31.12.2019 ex29242970 20 2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5) 0 % — 31.12.2019 ex29242970 23 Benalaxyl-M (ISO) (CAS RN 98243-83-5) 0 % — 31.12.2019 ex29242970 27 2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9) 0 % — 31.12.2021 ex29242970 33 N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) 0 % — 31.12.2019 ex29242970 37 Beflubutamid (ISO) (CAS RN 113614-08-7) 0 % — 31.12.2018 ex29242970 40 N,N’-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) 0 % — 31.12.2020 ex29242970 43 N,N’-(3,3'-Dimethylbiphenyl-4,4'-ylene)di(acetoacetamide) (CAS RN 91-96-3) 0 % — 31.12.2018 ex29242970 45 Propoxur (ISO) (CAS RN 114-26-1) 0 % — 31.12.2020 ex29242970 51 Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4) 0 % — 31.12.2017 ex29242970 53 4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) 0 % — 31.12.2017 ex29242970 55 N,N’-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5) 0 % — 31.12.2020 ex29242970 60 N,N’-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1) 0 % — 31.12.2020 ex29242970 61 (S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS 0143288-8) 0 % — 31.12.2020 ex29242970 62 2-Chlorobenzamide (CAS RN 609-66-5) 0 % — 31.12.2020 ex29242970 63 N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0) 0 % — 31.12.2021 ex29242970 64 N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8) 0 % — 31.12.2020 ex29242970 65 2-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0) 0 % — 31.12.2018 ex29242970 73 Napropamide (ISO) (CAS RN 15299-99-7) 0 % — 31.12.2019 ex29242970 75 3-Amino-p-anisanilide (CAS RN 120-35-4) 0 % — 31.12.2018 ex29242970 80 5'-Chloro-3-hydroxy-2',4'-dimethoxy-2-naphthanilide (CAS RN 92-72-8) 0 % — 31.12.2018 ex29242970 85 p-Aminobenzamide (CAS RN 2835-68-9) 0 % — 31.12.2018 ex29242970 86 Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more 0 % — 31.12.2017 ex29242970 87 Paracetamol (INN) (CAS RN 103-90-2) 0 % — 31.12.2018 ex29242970 88 5'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-63-7) 0 % — 31.12.2018 ex29242970 89 Flutolanil (ISO) (CAS RN 66332-96-5) 0 % — 31.12.2018 ex29242970 91 3-Hydroxy-2'-methoxy-2-naphthanilide (CAS RN 135-62-6) 0 % — 31.12.2018 ex29242970 92 3-Hydroxy-2-naphthanilide (CAS RN 92-77-3) 0 % — 31.12.2019 ex29242970 93 3-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5) 0 % — 31.12.2018 ex29242970 94 2'-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0) 0 % — 31.12.2018 ex29242970 97 1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3) 0 % — 31.12.2018 ex29251100 20 Saccharin and its sodium salt 0 % — 31.12.2018 ex29251995 10 N-Phenylmaleimide (CAS RN 941-69-5) 0 % — 31.12.2018 ex29251995 20 4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9) 0 % — 31.12.2017 ex29251995 30 N,N’-(m-Phenylene)dimaleimide (CAS RN 3006-93-7) 0 % — 31.12.2017 ex29252900 10 Dicyclohexylcarbodiimide (CAS RN 538-75-0) 0 % — 31.12.2018 ex29252900 20 N-[3-(Dimethylamino)propyl]-N’-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8) 0 % — 31.12.2018 ex29252900 30 Guanidine sulphamate (CAS RN 50979-18-5) 0 % — 31.12.2020 ex29269070 12 Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95 % or more 0 % — 31.12.2019 ex29269070 13 alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9) 0 % — 31.12.2018 ex29269070 14 Cyanoacetic acid (CAS RN 372-09-8) 0 % — 31.12.2020 ex29269070 16 4-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0) 0 % — 31.12.2019 ex29269070 17 Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more 0 % — 31.12.2020 ex29269070 20 2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0) 0 % — 31.12.2019 ex29269070 23 Acrinathrin (ISO) (CAS RN 101007-06-1) 0 % — 31.12.2018 ex29269070 25 2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2) 0 % — 31.12.2021 ex29269070 27 Cyhalofop-butyl (ISO) (CAS RN 122008-85-9) 0 % — 31.12.2018 ex29269070 35 4-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8) 0 % — 31.12.2021 ex29269070 40 2-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6) 0 % — 31.12.2021 ex29269070 50 Alkyl or alkoxyalkyl esters of cyanoacetic acid 0 % — 31.12.2018 ex29269070 61 m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3) 0 % — 31.12.2021 ex29269070 64 Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers 0 % — 31.12.2019 ex29269070 65 Malononitrile (CAS RN 109-77-3) 0 % — 31.12.2018 ex29269070 70 Methacrylonitrile (CAS RN 126-98-7) 0 % — 31.12.2019 ex29269070 74 Chlorothalonil (ISO) (CAS RN 1897-45-6) 0 % — 31.12.2019 ex29269070 75 Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0) 0 % — 31.12.2019 ex29269070 80 Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8) 0 % — 31.12.2018 ex29269070 86 Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6) 0 % — 31.12.2018 ex29269070 89 Butyronitrile (CAS RN 109-74-0) 0 % — 31.12.2018 ex29270000 10 2,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride 0 % — 31.12.2018 ex29270000 20 4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2) 0 % — 31.12.2018 ex29270000 30 4'-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4) 0 % — 31.12.2018 ex29270000 35 C.C’-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam 0 % — 31.12.2019 ex29270000 60 4,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0) 0 % — 31.12.2018 ex29270000 80 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7) 0 % — 31.12.2017 ex29280090 10 3,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N'-bipropionamide (CAS RN 32687-78-8) 0 % — 31.12.2018 ex29280090 13 Cymoxanil (ISO) (CAS RN 57966-95-7) 0 % — 31.12.2019 ex29280090 18 Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more 0 % — 31.12.2019 ex29280090 23 Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more 0 % — 31.12.2020 ex29280090 25 Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution 0 % — 31.12.2020 ex29280090 28 Pentan-2-one oxime (CAS RN 623-40-5) 0 % — 31.12.2021 ex29280090 30 N-Isopropylhydroxylamine (CAS RN 5080-22-8) 0 % — 31.12.2021 ex29280090 35 2-Chloro-N-methoxy-N-methylacetamide (CAS RN 67442-07-3) 0 % — 31.12.2018 ex29280090 40 O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2) 0 % — 31.12.2018 ex29280090 45 Tebufenozide (ISO) (CAS RN 112410-23-8) 0 % — 31.12.2018 ex29280090 50 Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 % 0 % — 31.12.2020 ex29280090 55 Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1) 0 % — 31.12.2018 ex29280090 60 Adipohydrazide (CAS RN 1071-93-8) 0 % — 31.12.2018 ex29280090 65 2-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride 0 % — 31.12.2019 ex29280090 70 Butanone oxime (CAS RN 96-29-7) 0 % — 31.12.2018 ex29280090 75 Metaflumizone (ISO) (CAS RN 139968-49-3) 0 % — 31.12.2021 ex29280090 80 Cyflufenamid (ISO) (CAS RN 180409-60-3) 0 % — 31.12.2018 ex29280090 85 Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5) 0 % — 31.12.2021 ex29291000 15 3,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate (CAS RN 91-97-4) 0 % — 31.12.2019 ex29291000 20 Butyl isocyanate (CAS RN 111-36-4) 0 % — 31.12.2017 ex29291000 40 m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7) 0 % — 31.12.2018 ex29291000 50 m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9) 0 % — 31.12.2018 ex29291000 55 2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) 0 % — 31.12.2017 ex29291000 60 Trimethylhexamethylene diisocyanate, mixed isomers 0 % — 31.12.2018 ex29291000 80 1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) 0 % — 31.12.2017 ex29302000 10 Prosulfocarb (ISO) (CAS RN 52888-80-9) 0 % — 31.12.2017 ex29302000 20 2-Isopropylethylthiocarbamate (CAS RN 141-98-0) 0 % — 31.12.2021 ex29309098 10 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) 0 % — 31.12.2020 ex29309098 13 Mercaptamine hydrochloride (CAS RN 156-57-0) 0 % — 31.12.2021 ex29309098 14 4-(Methylthio)benzaldehyde (CAS RN 3446-89-7) 0 % — 31.12.2018 ex29309098 15 Ethoprophos (ISO) (CAS RN 13194-48-4) 0 % — 31.12.2018 ex29309098 16 3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1) 0 % — 31.12.2019 ex29309098 17 2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4) 0 % — 31.12.2018 ex29309098 19 N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N’-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2) 0 % — 31.12.2020 ex29309098 21 [2,2'-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) 0 % — 31.12.2021 ex29309098 22 Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more 0 % — 31.12.2020 ex29309098 23 Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8) 0 % — 31.12.2018 ex29309098 25 Thiophanate-methyl (ISO), (CAS RN 23564-05-8) 0 % — 31.12.2018 ex29309098 26 Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more 0 % — 31.12.2020 ex29309098 27 2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0) 0 % — 31.12.2019 ex29309098 30 4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6) 0 % — 31.12.2018 ex29309098 33 2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1) 0 % — 31.12.2019 ex29309098 35 Glutathione (CAS RN 70-18-8) 0 % — 31.12.2021 ex29309098 37 Ethanethioamide (CAS RN 62-55-5) 0 % — 31.12.2018 ex29309098 40 3,3'-Thiodi(propionic acid) (CAS RN 111-17-1) 0 % — 31.12.2018 ex29309098 43 Trimethylsulfoxonium iodide (CAS RN 1774-47-6) 0 % — 31.12.2018 ex29309098 45 2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5) 0 % — 31.12.2018 ex29309098 53 Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9) 0 % — 31.12.2020 ex29309098 55 Thiourea (CAS RN 62-56-6) 0 % — 31.12.2020 ex29309098 57 Methyl (methylthio)acetate (CAS RN 16630-66-3) 0 % — 31.12.2020 ex29309098 60 Methyl phenyl sulphide (CAS RN 100-68-5) 0 % — 31.12.2018 ex29309098 64 3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2) 0 % — 31.12.2019 ex29309098 65 Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7) 0 % — 31.12.2017 ex29309098 66 Diphenyl sulphide (CAS RN 139-66-2) 0 % — 31.12.2017 ex29309098 67 3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2) 0 % — 31.12.2018 ex29309098 68 Clethodim (ISO) (CAS RN 99129-21-2) 0 % — 31.12.2017 ex29309098 77 4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7) 0 % — 31.12.2018 ex29309098 78 4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6) 0 % — 31.12.2021 ex29309098 80 Captan (ISO) (CAS RN 133-06-2) 0 % — 31.12.2018 ex29309098 81 Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3) 3 % — 31.12.2019 ex29309098 83 Methyl-p-tolyl sulphone (CAS RN 3185-99-7) 0 % — 31.12.2017 ex29309098 85 2-Methyl-1-(methylthio)-2-propanamine (CAS RN 36567-04-1) 0 % — 31.12.2021 ex29309098 87 3-Sulphinobenzoic acid (CAS RN 15451-00-0) 0 % — 31.12.2018 ex29309098 89 Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates 0 % — 31.12.2021 ex29309098 93 1-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8) 0 % — 31.12.2021 ex29309098 95 N-(cyclohexylthio)phthalimide (CAS RN 17796-82-6) 0 % — 31.12.2021 ex29309098 97 Diphenyl sulphone (CAS RN 127-63-9) 0 % — 31.12.2021 ex29313990 08 Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution 0 % — 31.12.2017 ex29313990 13 Trioctylphosphine oxide (CAS RN 78-50-2) 0 % — 31.12.2021 ex29313990 23 Di-tert-butylphosphane (CAS RN 819-19-2) 0 % — 31.12.2018 ex29313990 25 (Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) 0 % — 31.12.2017 ex29313990 28 N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) 0 % — 31.12.2019 ex29313990 30 Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6) 0 % — 31.12.2018 ex29313990 40 Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1) 0 % — 31.12.2021 ex29313990 43 Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane 0 % — 31.12.2018 ex29313990 48 Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4) 0 % — 31.12.2019 ex29313990 55 3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8) 0 % — 31.12.2018 ex29313990 57 Trimethyl phosphonoacetate (CAS RN 5927-18-4) 0 % — 31.12.2020 ex29319000 03 Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane 0 % — 31.12.2018 ex29319000 05 Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN 0 % — 31.12.2020 ex29319000 15 Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl 0 % — 31.12.2019 ex29319000 18 Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5) 0 % — 31.12.2019 ex29319000 33 Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7) 0 % — 31.12.2019 ex29319000 35 N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3) 0 % — 31.12.2019 ex29319000 45 Tris(4-methylpentan-2-oximino)methylsilane (CAS RN 37859-57-7) 0 % — 31.12.2018 ex29319000 50 Trimethylsilane (CAS RN 993-07-7) 0 % — 31.12.2021 ex29319000 53 Trimethylborane (CAS RN 593-90-8) 0 % — 31.12.2019 ex29319000 60 4-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS RN 944129-07-1) 0 % — 31.12.2020 ex29319000 63 Chloroethenyldimethylsilane (CAS RN 1719-58-0) 0 % — 31.12.2020 ex29319000 65 Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6) 0 % — 31.12.2020 ex29319000 67 Dimethyltin dioleate (CAS RN 3865-34-7) 0 % — 31.12.2020 ex29319000 70 (4-Propylphenyl)boronic acid (CAS RN 134150-01-9) 0 % — 31.12.2020 ex29321300 10 Tetrahydrofurfuryl alcohol (CAS RN 97-99-4) 0 % — 31.12.2018 ex29321900 20 Tetrahydrofuran-borane (CAS RN 14044-65-6) 0 % — 31.12.2020 ex29321900 40 Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more 0 % — 31.12.2019 ex29321900 41 2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1) 0 % — 31.12.2019 ex29321900 70 Furfurylamine (CAS RN 617-89-0) 0 % — 31.12.2019 ex29321900 75 Tetrahydro-2-methylfuran (CAS RN 96-47-9) 0 % — 31.12.2018 ex29321900 80 5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7) 0 % — 31.12.2021 ex29322090 10 2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 70516-41-5) 0 % — 31.12.2018 ex29322090 15 Coumarin (CAS RN 91-64-5) 0 % — 31.12.2021 ex29322090 20 Ethyl 6'-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9'-xanthene]-2'-carboxylate (CAS RN 154306-60-2) 0 % — 31.12.2017 ex29322090 35 6'-Diethylamino-3'-methyl-2'-(2,4-xylidino)spiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 36431-22-8) 0 % — 31.12.2018 ex29322090 40 (S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9) 0 % — 31.12.2017 ex29322090 45 2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1) 0 % — 31.12.2018 ex29322090 55 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7) 0 % — 31.12.2018 ex29322090 60 6'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 29512-49-0) 0 % — 31.12.2021 ex29322090 65 Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0) 0 % — 31.12.2020 ex29322090 70 3',6'-Bis(ethylamino)-2',7'-dimethylspiro[isobenzofuran-1(3H),9'-[9H]-xanthen]-3-one, (CAS RN 41382-37-0) 0 % — 31.12.2018 ex29322090 71 6'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 89331-94-2) 0 % — 31.12.2021 ex29322090 80 Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5) 0 % — 31.12.2018 ex29322090 84 Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5) 0 % — 31.12.2018 ex29329900 10 Bendiocarb (ISO) (CAS RN 22781-23-3) 0 % — 31.12.2018 ex29329900 15 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5) 0 % — 31.12.2021 ex29329900 20 Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1) 0 % — 31.12.2021 ex29329900 25 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) 0 % — 31.12.2017 ex29329900 43 Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more 0 % — 31.12.2019 ex29329900 45 2-Butylbenzofuran (CAS RN 4265-27-4) 0 % — 31.12.2018 ex29329900 50 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) 0 % — 31.12.2020 ex29329900 53 1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3) 0 % — 31.12.2018 ex29329900 55 6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7) 0 % — 31.12.2018 ex29329900 65 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5) 0 % — 31.12.2020 ex29329900 70 1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9) 0 % — 31.12.2021 ex29329900 75 3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0) 0 % — 31.12.2021 ex29329900 80 1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0) 0 % — 31.12.2017 ex29329900 85 1,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2) 0 % — 31.12.2018 ex29331990 15 Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more 0 % — 31.12.2019 ex29331990 25 3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9) 0 % — 31.12.2019 ex29331990 30 3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0) 0 % — 31.12.2018 ex29331990 35 1,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl fluoride (CAS RN 191614-02-5) 0 % — 31.12.2020 ex29331990 40 Edaravone (INN) (CAS RN 89-25-8) 0 % — 31.12.2018 ex29331990 50 Fenpyroximate (ISO) (CAS RN 134098-61-6) 0 % — 31.12.2019 ex29331990 60 Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9) 0 % — 31.12.2019 ex29331990 70 4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2) 0 % — 31.12.2018 ex29331990 80 3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5) 0 % — 31.12.2017 ex29331990 85 Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioate (CAS RN 473799-16-5) 0 % — 31.12.2017 ex29332100 35 Iprodione (ISO) (CAS RN 36734-19-7) with a purity by weight of 97 % or more 0 % — 31.12.2020 ex29332100 50 1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)/(CAS RN 32718-18-6) 0 % — 31.12.2021 ex29332100 55 1-Aminohydantoin hydrochloride (CAS RN 2827-56-7) 0 % — 31.12.2020 ex29332100 60 DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9) 0 % — 31.12.2021 ex29332100 80 5,5-Dimethylhydantoin (CAS RN 77-71-4) 0 % — 31.12.2020 ex29332990 15 Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0) 0 % — 31.12.2018 ex29332990 25 Prochloraz (ISO) (CAS RN 67747-09-5) 0 % — 31.12.2018 ex29332990 35 1-Trityl-4-formylimidazole (CAS RN 33016-47-6) 0 % — 31.12.2018 ex29332990 40 Triflumizole (ISO) (CAS RN 68694-11-1) 0 % — 31.12.2019 ex29332990 45 Prochloraz copper chloride (ISO) (CAS RN 156065-03-1) 0 % — 31.12.2018 ex29332990 50 1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9) 0 % — 31.12.2018 ex29332990 55 Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more 0 % — 31.12.2019 ex29332990 60 1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2) 0 % — 31.12.2021 ex29332990 65 (S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8) 0 % — 31.12.2020 ex29332990 70 Cyazofamid (ISO) (CAS RN 120116-88-3) 0 % — 31.12.2021 ex29332990 80 Imazalil (ISO) (CAS RN 35554-44-0) 0 % — 31.12.2017 29333950 Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4) 0 % — 31.12.2019 ex29333999 11 2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5) 0 % — 31.12.2019 ex29333999 12 2,3-Dichloropyridine (CAS RN 2402-77-9) 0 % — 31.12.2017 ex29333999 13 Methyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS RN 130194-96-6) 0 % — 31.12.2020 ex29333999 14 N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5) 0 % — 31.12.2020 ex29333999 15 Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9) 0 % — 31.12.2018 ex29333999 16 Methyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6) 0 % — 31.12.2020 ex29333999 17 3,5-Dimethylpyridine (CAS RN 591-22-0) 0 % — 31.12.2020 ex29333999 18 6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0) 0 % — 31.12.2017 ex29333999 19 Methyl nicotinate (INNM) (CAS RN 93-60-7) 0 % — 31.12.2020 ex29333999 20 Copper pyrithione powder (CAS RN 14915-37-8) 0 % — 31.12.2020 ex29333999 21 Boscalid (ISO) (CAS RN 188425-85-6) 0 % — 31.12.2019 ex29333999 22 Isonicotinic acid (CAS RN 55-22-1) 0 % — 31.12.2019 ex29333999 23 2-Chloro-3-cyanopyridine (CAS RN 6602-54-6) 0 % — 31.12.2020 ex29333999 24 2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3) 0 % — 31.12.2019 ex29333999 25 Imazethapyr (ISO) (CAS RN 81335-77-5) 0 % — 31.12.2018 ex29333999 26 2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6) 0 % — 31.12.2020 ex29333999 27 Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2) 0 % — 31.12.2021 ex29333999 28 Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0) 0 % — 31.12.2019 ex29333999 29 3,5-Dichloro-2-cyanopyridine (CAS RN 85331-33-5) 0 % — 31.12.2021 ex29333999 31 2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4) 0 % — 31.12.2019 ex29333999 32 2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2) 0 % — 31.12.2021 ex29333999 34 3-Chloro-(5-trifluoromethyl)-2-pyridineacetonitrile (CAS RN 157764-10-8) 0 % — 31.12.2019 ex29333999 35 Aminopyralid (ISO) (CAS RN 150114-71-9) 0 % — 31.12.2018 ex29333999 37 Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2) 0 % — 31.12.2021 ex29333999 40 2-Chloropyridine (CAS RN 109-09-1) 0 % — 31.12.2018 ex29333999 45 5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole (CAS RN 102625-64-9) 0 % — 31.12.2019 ex29333999 47 (-)-trans-4-(4'-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5) 0 % — 31.12.2021 ex29333999 48 Flonicamid (ISO) (CAS RN 158062-67-0) 0 % — 31.12.2019 ex29333999 50 N-Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8) 0 % — 31.12.2017 ex29333999 53 3-Bromopyridine (CAS RN 626-55-1) 0 % — 31.12.2018 ex29333999 55 Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more 0 % — 31.12.2019 ex29333999 57 Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) 0 % — 31.12.2017 ex29333999 58 4-Chloro-1-methylpiperidine (CAS RN 5570-77-4) 0 % — 31.12.2018 ex29333999 60 2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0) 0 % — 31.12.2018 ex29333999 63 2-Aminomethyl-3-chloro-5-trifluoromethylpyridine hydrochloride (CAS RN 326476-49-7) 0 % — 31.12.2018 ex29333999 65 Acetamiprid (ISO) (CAS RN 135410-20-7) 0 % — 31.12.2018 ex29333999 67 (1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2) 0 % — 31.12.2018 ex29333999 70 2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7) 0 % — 31.12.2021 ex29333999 72 5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4) 0 % — 31.12.2021 ex29333999 77 Imazamox (ISO) (CAS RN 114311-32-9) 0 % — 31.12.2018 ex29333999 85 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) 0 % — 31.12.2020 ex29334910 10 Quinmerac (ISO) (CAS RN 90717-03-6) 0 % — 31.12.2018 ex29334910 20 3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7) 0 % — 31.12.2018 ex29334910 30 Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6) 0 % — 31.12.2017 ex29334910 40 4,7-Dichloroquinoline (CAS RN 86-98-6) 0 % — 31.12.2019 ex29334910 50 1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0) 0 % — 31.12.2020 ex29334990 25 Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2) for use in the formulation of herbicides 0 % — 31.12.2021 ex29334990 30 Quinoline (CAS RN 91-22-5) 0 % — 31.12.2020 ex29334990 35 [1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CUS 0141126-3) 0 % — 31.12.2020 ex29334990 40 Isoquinoline (CAS RN 119-65-3) 0 % — 31.12.2020 ex29334990 70 Quinolin-8-ol (CAS RN 148-24-3) 0 % — 31.12.2018 ex29334990 80 Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1) 0 % — 31.12.2018 ex29335200 10 Malonylurea (barbituric acid) (CAS RN 67-52-7) 0 % — 31.12.2021 ex29335995 10 6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5) 0 % — 31.12.2019 ex29335995 13 2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9) 0 % — 31.12.2018 ex29335995 15 Sitagliptin phosphate monohydrate (CAS RN 654671-77-9) 0 % — 31.12.2018 ex29335995 17 N,N’-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6) 0 % — 31.12.2018 ex29335995 18 1-Methyl-3-phenylpiperazine (CAS RN 5271-27-2) 0 % — 31.12.2020 ex29335995 20 2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2) 0 % — 31.12.2018 ex29335995 21 N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2) 0 % — 31.12.2020 ex29335995 23 6-Chloro-3-methyluracil (CAS RN 4318-56-3) 0 % — 31.12.2018 ex29335995 27 2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8) 0 % — 31.12.2018 ex29335995 30 Mepanipyrim (ISO) (CAS RN 110235-47-7) 0 % — 31.12.2018 ex29335995 33 4,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9) 0 % — 31.12.2019 ex29335995 37 6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5) 0 % — 31.12.2019 ex29335995 43 2-(4-(2-Hydroxyethyl)piperazin-1-yl)ethanesulfonic acid (CAS RN 7365-45-9) 0 % — 31.12.2019 ex29335995 45 1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1) 0 % — 31.12.2019 ex29335995 47 6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more 0 % — 31.12.2020 ex29335995 50 2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1) 0 % — 31.12.2019 ex29335995 53 5-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS RN 1480-96-2) 0 % — 31.12.2020 ex29335995 57 5,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine (CAS RN 13223-43-3) 0 % — 31.12.2020 ex29335995 60 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8) 0 % — 31.12.2018 ex29335995 65 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6) 0 % — 31.12.2019 ex29335995 70 N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9) 0 % — 31.12.2018 ex29335995 75 (2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8) 0 % — 31.12.2019 ex29335995 77 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6) 0 % — 31.12.2017 ex29335995 87 5-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5) 0 % — 31.12.2021 ex29335995 88 Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides 0 % — 31.12.2021 ex29335995 89 6-Benzyladenine (CAS RN 1214-39-7) 0 % — 31.12.2021 ex29336980 13 Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more 0 % — 31.12.2020 ex29336980 15 2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6) 0 % — 31.12.2020 ex29336980 17 Benzoguanamine (CAS RN 91-76-9) 0 % — 31.12.2020 ex29336980 40 Troclosene sodium (INNM) (CAS RN 2893-78-9) 0 % — 31.12.2021 ex29336980 50 1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9) 0 % — 31.12.2018 ex29336980 55 Terbutryn (ISO) (CAS RN 886-50-0) 0 % — 31.12.2020 ex29336980 60 Cyanuric acid (CAS RN 108-80-5) 0 % — 31.12.2020 ex29336980 65 1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6) 0 % — 31.12.2018 ex29336980 75 Metamitron (ISO) (CAS RN 41394-05-2) 0 % — 31.12.2019 ex29336980 80 Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7) 0 % — 31.12.2018 ex29337900 15 Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1) 0 % — 31.12.2021 ex29337900 30 5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0) 0 % — 31.12.2017 ex29337900 50 6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6) 0 % — 31.12.2018 ex29337900 60 3,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9) 0 % — 31.12.2019 ex29337900 70 (S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2) 0 % — 31.12.2020 ex29339980 10 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7) 0 % — 31.12.2018 ex29339980 11 Fenbuconazole (ISO) (CAS RN 114369-43-6) 0 % — 31.12.2019 ex29339980 12 Myclobutanil (ISO) (CAS RN 88671-89-0) 0 % — 31.12.2019 ex29339980 13 5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7) 0 % — 31.12.2021 ex29339980 14 2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6) 0 % — 31.12.2018 ex29339980 15 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1) 0 % — 31.12.2018 ex29339980 16 Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more 0 % — 31.12.2020 ex29339980 17 Carfentrazone-ethyl (ISO) (CAS RN 128639-02-1) with a purity by weight of 93 % or more 0 % — 31.12.2020 ex29339980 18 4,4'-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4) 0 % — 31.12.2017 ex29339980 19 2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0) 0 % — 31.12.2019 ex29339980 20 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7) 0 % — 31.12.2018 ex29339980 21 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1) 0 % — 31.12.2020 ex29339980 23 Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more 0 % — 31.12.2019 ex29339980 24 1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3) 0 % — 31.12.2017 ex29339980 26 (2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4-methylbenzenesulfonate (CUS 0143289-9) 0 % — 31.12.2020 ex29339980 27 5,6-Dimethylbenzimidazole (CAS RN 582-60-5) 0 % — 31.12.2019 ex29339980 28 N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8) 0 % — 31.12.2017 ex29339980 29 3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS RN 93957-50-7) 0 % — 31.12.2020 ex29339980 30 Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3) 0 % — 31.12.2018 ex29339980 31 Triadimenol (ISO) (CAS RN 55219-65-3) with a purity by weight of 97 % or more 0 % — 31.12.2020 ex29339980 33 Penconazole (ISO) (CAS RN 66246-88-6) 0 % — 31.12.2019 ex29339980 34 2,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5) 0 % — 31.12.2021 ex29339980 36 3-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2) 0 % — 31.12.2021 ex29339980 37 8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1) 0 % — 31.12.2019 ex29339980 38 (4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0) 0 % — 31.12.2021 ex29339980 39 O-(benzotriazol-1-yl)-N,N,N’,N’-tetramethyluronium tetrafluoroborate (CAS RN 125700-67-6) 0 % — 31.12.2021 ex29339980 40 trans-4-Hydroxy-L-proline (CAS RN 51-35-4) 0 % — 31.12.2018 ex29339980 43 2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7) 0 % — 31.12.2017 ex29339980 45 Maleic hydrazide (ISO) (CAS RN 123-33-1) 0 % — 31.12.2018 ex29339980 47 Paclobutrazol (ISO) (CAS RN 76738-62-0) 0 % — 31.12.2017 ex29339980 50 Metconazole (ISO) (CAS RN 125116-23-6) 3,2 % — 31.12.2018 ex29339980 52 N-Boc-trans-4-Hydroxy-L-proline methyl ester (CAS RN 74844-91-0) 0 % — 31.12.2020 ex29339980 53 Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) 0 % — 31.12.2018 ex29339980 54 3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6) 0 % — 31.12.2020 ex29339980 55 Pyridaben (ISO) (CAS RN 96489-71-3) 0 % — 31.12.2019 ex29339980 57 2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1) 0 % — 31.12.2018 ex29339980 62 1H-Indole-6-carboxylic acid (CAS RN 1670-82-2) 0 % — 31.12.2018 ex29339980 67 Candesartan ethyl ester (INNM) (CAS RN 139481-58-6) 0 % — 31.12.2021 ex29339980 71 10-Methoxyiminostilbene (CAS RN 4698-11-7) 0 % — 31.12.2018 ex29339980 72 1,4,7-Trimethyl-1,4,7-Triazacyclononane 0 % — 31.12.2018 ex29339980 74 Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2) 0 % — 31.12.2018 ex29339980 78 3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7) 0 % — 31.12.2018 ex29339980 81 1,2,3-Benzotriazole (CAS RN 95-14-7) 0 % — 31.12.2021 ex29339980 82 Tolytriazole (CAS RN 29385-43-1) 0 % — 31.12.2018 ex29339980 89 Carbendazim (ISO) (CAS RN 10605-21-7) 0 % — 31.12.2018 ex29341000 10 Hexythiazox (ISO) (CAS RN 78587-05-0) 0 % — 31.12.2018 ex29341000 15 4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3) 0 % — 31.12.2017 ex29341000 20 2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8) 0 % — 31.12.2018 ex29341000 25 (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3) 0 % — 31.12.2017 ex29341000 35 (2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8) 0 % — 31.12.2017 ex29341000 40 (Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7) 0 % — 31.12.2018 ex29341000 45 2-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8) 0 % — 31.12.2019 ex29341000 60 Fosthiazate (ISO) (CAS RN 98886-44-3) 0 % — 31.12.2019 ex29341000 80 3,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0) 0 % — 31.12.2021 ex29342080 30 2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1) 0 % — 31.12.2021 ex29342080 40 1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5) 0 % — 31.12.2017 ex29342080 50 S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9) 0 % — 31.12.2018 ex29342080 60 Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3) 0 % — 31.12.2020 ex29342080 70 N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) 0 % — 31.12.2020 ex29343090 10 2-Methylthiophenothiazine (CAS RN 7643-08-5) 0 % — 31.12.2017 ex29349990 10 Fluralaner (INN) (CAS RN 864731-61-3) 0 % — 31.12.2019 ex29349990 11 Methyl 3-{1,4-dioxaspiro[4.5]dec-8-yl[(trans-4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene-2-carboxylate (CAS RN 1026785-65-8) 0 % — 31.12.2018 ex29349990 12 Dimethomorph (ISO) (CAS RN 110488-70-5) 0 % — 31.12.2018 ex29349990 13 Buprofezin (ISO) of a purity by weight of 98,5 % or more (CAS RN 953030-84-7) 0 % — 31.12.2018 ex29349990 14 Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2) 0 % — 31.12.2017 ex29349990 15 Carboxin (ISO) (CAS RN 5234-68-4) 0 % — 31.12.2018 ex29349990 16 Difenoconazole (ISO) (CAS RN 119446-68-3) 0 % — 31.12.2019 ex29349990 18 3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) 0 % — 31.12.2017 ex29349990 19 2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol (CAS RN 329216-67-3) 0 % — 31.12.2019 ex29349990 20 Thiophene (CAS RN 110-02-1) 0 % — 31.12.2019 ex29349990 22 7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1) 0 % — 31.12.2017 ex29349990 23 Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2) 0 % — 31.12.2021 ex29349990 24 Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more 0 % — 31.12.2019 ex29349990 25 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) 0 % — 31.12.2020 ex29349990 26 4-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8) 0 % — 31.12.2019 ex29349990 27 2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2) 0 % — 31.12.2019 ex29349990 28 11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4) 0 % — 31.12.2021 ex29349990 30 Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7) 0 % — 31.12.2019 ex29349990 31 Uridine 5′-diphospho-N-acetylgalactosamine disodium salt (CAS RN 91183-98-1) 0 % — 31.12.2020 ex29349990 32 Uridine 5′-diphosphoglucuronic acid trisodium salt (CAS RN 63700-19-6) 0 % — 31.12.2020 ex29349990 34 7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)-one (CAS RN 69898-40-4) 0 % — 31.12.2020 ex29349990 35 Dimethenamide (ISO) (CAS RN 87674-68-8) 0 % — 31.12.2018 ex29349990 36 Oxadiazon (ISO) (CAS RN 19666-30-9) with a purity by weight of 95 % or more 0 % — 31.12.2020 ex29349990 37 4-Propan-2-ylmorpholine (CAS RN 1004-14-4) 0 % — 31.12.2017 ex29349990 38 Clomazone (ISO) (CAS RN 81777-89-1) with a purity by weight of 96 % or more 0 % — 31.12.2020 ex29349990 39 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) 0 % — 31.12.2020 ex29349990 41 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8) 0 % — 31.12.2020 ex29349990 42 1-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4) 0 % — 31.12.2019 ex29349990 44 Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more 0 % — 31.12.2020 ex29349990 45 Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione (CAS RN 2451-62-9) 0 % — 31.12.2018 ex29349990 48 Propan-2-ol – 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9) 0 % — 31.12.2021 ex29349990 50 10-[1,1'-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1) 0 % — 31.12.2020 ex29349990 60 DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3) 0 % — 31.12.2018 ex29349990 66 Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0) 0 % — 31.12.2018 ex29349990 72 1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4) 0 % — 31.12.2018 ex29349990 74 2-Isopropylthioxanthone (CAS RN 5495-84-1) 0 % — 31.12.2017 ex29349990 75 (4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1) 0 % — 31.12.2021 ex29349990 ex32042000 76 10 2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5) 0 % — 31.12.2021 ex29349990 79 Thiophen-2-ethanol (CAS RN 5402-55-1) 0 % — 31.12.2018 ex29349990 83 Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more 0 % — 31.12.2019 ex29349990 84 Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more 0 % — 31.12.2019 ex29349990 86 Dithianon (ISO) (CAS RN 3347-22-6) 0 % — 31.12.2020 ex29349990 87 2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) 0 % — 31.12.2020 ex29359090 10 Florasulam (ISO) (CAS RN 145701-23-1) 0 % — 31.12.2019 ex29359090 15 Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5) 0 % — 31.12.2018 ex29359090 17 6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1) 0 % — 31.12.2018 ex29359090 20 Toluenesulphonamides 0 % — 31.12.2018 ex29359090 23 N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4) 0 % — 31.12.2021 ex29359090 25 Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7) 0 % — 31.12.2018 ex29359090 27 Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9) 0 % — 31.12.2021 ex29359090 28 N-Fluorobenzenesulphonimide (CAS RN 133745-75-2) 0 % — 31.12.2018 ex29359090 35 Chlorsulfuron (ISO) (CAS RN 64902-72-3) 0 % — 31.12.2018 ex29359090 42 Penoxsulam (ISO) (CAS RN 219714-96-2) 0 % — 31.12.2020 ex29359090 43 Oryzalin (ISO) (CAS RN 19044-88-3) 0 % — 31.12.2019 ex29359090 45 Rimsulfuron (ISO) (CAS RN 122931-48-0) 0 % — 31.12.2018 ex29359090 47 Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more 0 % — 31.12.2019 ex29359090 48 (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid – 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4) 0 % — 31.12.2021 ex29359090 50 4,4'-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3) 0 % — 31.12.2018 ex29359090 52 (1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS 0143290-2) 0 % — 31.12.2020 ex29359090 53 2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4) 0 % — 31.12.2019 ex29359090 54 Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more 0 % — 31.12.2020 ex29359090 55 Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3) 0 % — 31.12.2018 ex29359090 56 N-(p-Toluenesulphonyl)-N’-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) 0 % — 31.12.2020 ex29359090 57 N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4) 0 % — 31.12.2020 ex29359090 58 1-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8) 0 % — 31.12.2020 ex29359090 59 Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more 0 % — 31.12.2020 ex29359090 63 Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more 0 % — 31.12.2019 ex29359090 65 Tribenuron-methyl (ISO) (CAS RN 101200-48-0) 0 % — 31.12.2018 ex29359090 67 N-(2-phenoxyphenyl)methanesulphonamide (CAS RN 51765-51-6) 0 % — 31.12.2021 ex29359090 73 (2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) 0 % — 31.12.2017 ex29359090 75 Metsulfuron-methyl (ISO) (CAS RN 74223-64-6) 0 % — 31.12.2018 ex29359090 77 [[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7) 0 % — 31.12.2019 ex29359090 85 N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride 0 % — 31.12.2018 ex29359090 88 N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3) 0 % — 31.12.2018 ex29359090 89 3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0) 0 % — 31.12.2021 ex29389030 10 Ammonium glycyrrhizate (CAS RN 53956-04-0) 0 % — 31.12.2020 ex29389090 10 Hesperidin (CAS RN 520-26-3) 0 % — 31.12.2018 ex29389090 20 Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0) 0 % — 31.12.2018 ex29400000 30 D(+)- Trehalose dihydrate (CAS RN 6138-23-4) 0 % — 31.12.2021 ex29400000 40 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2) 0 % — 31.12.2019 ex29412030 10 Dihydrostreptomycin sulphate (CAS RN 5490-27-7) 0 % — 31.12.2021 ex29420000 10 Sodium triacetoxyborohydride (CAS RN 56553-60-7) 0 % — 31.12.2021 32012000 Wattle extract 0 % — 31.12.2018 ex32019090 20 Tanning extracts derived from gambier and myrobalan fruits 0 % — 31.12.2018 ex32019090 ex32029000 40 10 Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3) 0 % — 31.12.2020 ex32041100 15 Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight 0 % — 31.12.2018 ex32041100 20 Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight 0 % — 31.12.2020 ex32041100 25 N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6) 0 % — 31.12.2019 ex32041100 30 Preparation of dispersion dyes, containing: 0 % — 31.12.2020 ex32041100 40 Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight 0 % — 31.12.2021 ex32041100 50 Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight 0 % — 31.12.2021 ex32041100 60 Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight 0 % — 31.12.2021 ex32041100 70 Colourant C.I. Disperse Red 343 (CAS RN 99035-78-6) and preparations based thereon with a colourant C.I. Disperse Red 343 content of 95 % or more by weight 0 % — 31.12.2017 ex32041100 80 Dye preparation, non-ionogenic, containing: 0 % — 31.12.2017 ex32041200 10 Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight 0 % — 31.12.2021 ex32041200 15 Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 17 Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 20 Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0) 0 % — 31.12.2017 ex32041200 25 Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight 0 % — 31.12.2021 ex32041200 27 Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 30 Acid dye preparation, anionic, containing: 0 % — 31.12.2017 ex32041200 35 Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 37 Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight 0 % — 31.12.2021 ex32041200 40 Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0) 0 % — 31.12.2018 ex32041200 45 Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 47 Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 50 Colourant C.I. Acid Blue 80 (CAS RN 4474-24-2) and preparations based thereon with a colourant C.I. Acid Blue 80 content of 99 % or more by weight 0 % — 31.12.2018 ex32041200 55 Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 57 Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 60 Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight 0 % — 31.12.2019 ex32041200 65 Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight 0 % — 31.12.2021 ex32041200 70 Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight 0 % — 31.12.2020 ex32041300 10 Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight 0 % — 31.12.2021 ex32041300 20 (2,2'-(3,3'-Dioxidobiphenyl-4,4'-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1) 0 % — 31.12.2017 ex32041300 30 Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight 0 % — 31.12.2017 ex32041300 40 Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight 0 % — 31.12.2017 ex32041300 50 Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight 0 % — 31.12.2019 ex32041300 60 Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight 0 % — 31.12.2019 ex32041400 10 Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight 0 % — 31.12.2019 ex32041400 20 Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight 0 % — 31.12.2019 ex32041400 30 C.I. Colourant Direct Red 23 (CAS RN 3441-14-3) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight 0 % — 31.12.2019 ex32041400 40 Colourant C.I Direct Black 168, in powder form for leather dyeing (CAS RN 85631-88-5) and preparations based thereon with a colourant C.I. Direct Black 168 content by weight of 75 % or more, in powder form for leather dyeing 0 % — 31.12.2021 ex32041500 60 Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight 0 % — 31.12.2018 ex32041500 70 Colourant C.I. Vat Red 1 (CAS RN 2379-74-0) 0 % — 31.12.2018 ex32041600 20 Colourant Reactive Black 5 (CAS RN 17095-24-8) and preparations based thereon with a colourant Reactive Black 5 content of 60 % or more but not more than 75 % by weight, and including one or more of the following: 0 % — 31.12.2019 ex32041700 10 Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight 0 % — 31.12.2018 ex32041700 12 Colourant C.I. Pigment Orange 64 (CAS RN 72102-84-2) and preparations based thereon with a colourant C.I. colourant orange 64 content of 90 % or more by weight 0 % — 31.12.2019 ex32041700 15 Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight 0 % — 31.12.2021 ex32041700 16 Colourant C.I. Pigment Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Pigment Red 49:2 content of 60 % or more by weight 0 % — 31.12.2020 ex32041700 17 Colourant C.I. Pigment Red 12 (CAS RN 6410-32-8) and preparations based thereon with a colourant C.I. Pigment Red 12 content of 35 % or more by weight 0 % — 31.12.2019 ex32041700 18 Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight 0 % — 31.12.2021 ex32041700 19 Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight 0 % — 31.12.2018 ex32041700 20 Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight 0 % — 31.12.2021 ex32041700 21 Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight 0 % — 31.12.2019 ex32041700 23 Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6) 0 % — 31.12.2019 ex32041700 25 Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight 0 % — 31.12.2021 ex32041700 33 Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight 0 % — 31.12.2020 ex32041700 35 Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight 0 % — 31.12.2021 ex32041700 40 Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight 0 % — 31.12.2019 ex32041700 45 Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight 0 % — 31.12.2018 ex32041700 60 Colourant C.I. Pigment Red 53:1 (CAS RN 5160-02-1) and preparations based thereon with a colourant C.I. Pigment Red 53:1 content of 50 % or more by weight 0 % — 31.12.2021 ex32041700 65 Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight 0 % — 31.12.2021 ex32041700 67 Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight. 0 % — 31.12.2018 ex32041700 75 Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight 0 % — 31.12.2017 ex32041700 80 Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight 0 % — 31.12.2017 ex32041700 85 Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight 0 % — 31.12.2017 ex32041700 88 Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight 0 % — 31.12.2017 ex32041900 12 Colourant C.I. Solvent Violet 49 (CAS RN 205057-15-4) 0 % — 31.12.2019 ex32041900 13 Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight 0 % — 31.12.2021 ex32041900 14 Red colourant preparation, in a form of wet paste, containing by weight: 0 % — 31.12.2019 ex32041900 21 Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6) 0 % — 31.12.2019 ex32041900 43 Photochromic dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2) 0 % — 31.12.2018 ex32041900 47 Photochromic dye, 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl)morpholine (CUS 0133726-4) 0 % — 31.12.2018 ex32041900 52 Colourant C.I. Solvent Red 135 (CAS RN 20749-68-2) and preparations based thereon with a colourant C.I. Solvent Red 135 content of 95 % or more by weight 0 % — 31.12.2021 ex32041900 53 Photochromic dye, 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3) 0 % — 31.12.2018 ex32041900 55 Photochromic dye, 4, 4'-(7-methoxy-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2, 1-f]chromene-3, 3-diyl)diphenol (CUS 0133728-6) 0 % — 31.12.2018 ex32041900 57 Photochromic dye, bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate (CUS 0133729-7) 0 % — 31.12.2018 ex32041900 63 Photochromic dye, 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine (CUS 0133727-5) 0 % — 31.12.2018 ex32041900 70 Colourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2 content of 90 % or more by weight 0 % — 31.12.2018 ex32041900 71 Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight 0 % — 31.12.2020 ex32041900 73 Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight 0 % — 31.12.2020 ex32041900 77 Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight 0 % — 31.12.2021 ex32041900 84 Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight 0 % — 31.12.2017 ex32041900 85 Colourant C.I. Solvent Red HPR (CAS RN 75198-96-8) and preparations based thereon with a colourant C.I. Solvent Red HPR content of 95 % or more by weight 0 % — 31.12.2017 ex32042000 30 Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight 0 % — 31.12.2021 ex32049000 10 Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight 0 % — 31.12.2019 ex32050000 10 Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry 0 % — 31.12.2018 ex32050000 20 Dye C.I. Carbon Black 7 Lake 0 % — 31.12.2017 ex32061100 10 Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate 0 % — 31.12.2018 ex32061900 10 Preparation containing by weight: 0 % — 31.12.2021 ex32064200 10 Lithopone (CAS RN 1345-05-7) 0 % — 31.12.2018 ex32064970 10 Non aqueous dispersion, containing by weight: 0 % — 31.12.2018 ex32064970 20 Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8) 0 % — 31.12.2019 32065000 Inorganic products of a kind used as luminophores 0 % — 31.12.2018 ex32073000 10 Preparation containing: used for screen printing in the manufacture of multilayer ceramic capacitors 0 % — 31.12.2018 ex32073000 20 Printing paste containing 0 % — 31.12.2019 ex32074085 20 Glass flakes coated with silver, of an average diameter of 40 (± 10) μm 0 % — 31.12.2018 ex32074085 40 Glass flakes (CAS RN 65997-17-3): 0 % — 31.12.2017 ex32081010 10 Thermoplastic polyester copolymer resin with a solid content of 30 % or more but not more than 50 %, in organic solvents 0 % — 31.12.2020 ex32081090 10 Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer 0 % — 31.12.2018 ex32082010 10 Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer 0 % — 31.12.2018 ex32082010 20 Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether 0 % — 31.12.2018 ex32089019 10 Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol 0 % — 31.12.2018 ex32089019 15 Chlorinated polyolefins, in a solution 0 % — 31.12.2018 ex32089019 20 Preparation of 5 % or more but not more than 20 % by weight of propylene maleic anhydride copolymer or a blend of polypropylene and propylene maleic anhydride copolymer in an organic solvent 0 % — 31.12.2020 ex32089019 ex32089091 25 20 Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight 0 % — 31.12.2017 ex32089019 35 Silicones containing 50 % by weight or more of xylene of a kind used for the manufacture of long term surgical implants 0 % — 31.12.2018 ex32089019 40 Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane 0 % — 31.12.2018 ex32089019 ex38249992 45 63 Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate 0 % — 31.12.2018 ex32089019 47 Solution containing by weight: 0 % — 31.12.2021 ex32089019 50 Solution containing by weight: 0 % — 31.12.2018 ex32089019 60 Copolymer of hydroxystyrene with one or more of the following: dissolved in ethyl lactate 0 % — 31.12.2021 ex32089019 75 Acenaphthalene copolymer in ethyl lactate solution 0 % — 31.12.2017 ex32089099 10 Solution based on chemically modified natural polymers, containing two or more of the following dyes: 0 % — 31.12.2018 ex32151190 ex32151990 10 10 Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments 0 % — 31.12.2018 ex32151990 20 Ink: used to imprint electrodes 0 % l 31.12.2017 ex32159070 10 Ink formulation, for use in the manufacture of ink-jet cartridges 0 % — 31.12.2018 ex32159070 20 Heat sensitive ink fixed on a plastic film 0 % — 31.12.2018 ex32159070 30 Disposable cartridge ink, containing by weight: for use in the marking of integrated circuits 0 % — 31.12.2018 ex32159070 40 Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with: for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices 0 % — 31.12.2020 33011210 Essential oil of orange, not deterpenated 0 % — 31.12.2018 ex34021190 10 Sodium lauroyl methyl isethionate 0 % — 31.12.2020 ex34021300 10 Vinyl copolymer surface active agent based on polypropylene glycol 0 % — 31.12.2018 ex34021300 20 Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated 0 % — 31.12.2017 ex34021300 30 Polyoxyethylated-12-hydroxystearic acid (CAS RN 70142–34–6) 0 % — 31.12.2018 ex34029010 10 Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides 0 % — 31.12.2019 ex34029010 20 Mixture of docusate sodium (INN) and sodium benzoate 0 % — 31.12.2018 ex34029010 30 Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1) 0 % — 31.12.2020 ex34029010 50 Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol) 0 % — 31.12.2020 ex34029010 60 Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane 0 % — 31.12.2020 ex34029010 70 Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1) 0 % — 31.12.2019 ex34039900 10 Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides 0 % — 31.12.2018 ex35051050 20 O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch (CAS RN 9005-27-0) 0 % — 31.12.2018 ex35069110 ex35069190 10 10 Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) 0 % — 31.12.2018 ex35069110 ex35069190 30 30 Two component microencapsulated epoxy adhesive dispersed in a solvent 0 % — 31.12.2018 ex35069110 ex35069190 40 40 Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330) 0 % — 31.12.2019 ex35069110 ex35069190 50 50 Preparation containing by weight: Dissolved in: 0 % — 31.12.2020 ex35079090 10 Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products 0 % — 31.12.2019 ex35079090 20 Creatine amidinohydrolase (CAS RN 37340-58-2) 0 % — 31.12.2020 ex35079090 30 Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution with 0 % — 31.12.2021 ex36010000 10 Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators 0 % — 31.12.2021 ex37013000 20 Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm 0 % — 31.12.2019 ex37013000 30 Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,15 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm 0 % — 31.12.2018 ex37019900 10 Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541 or 8542 0 % — 31.12.2018 ex37050090 10 Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers 0 % — 31.12.2019 ex37071000 10 Photosensitive emulsion for the sensitization of silicon discs 0 % — 31.12.2018 ex37071000 15 Sensitising emulsion consisting of: in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone 0 % — 31.12.2018 ex37071000 25 Sensitising emulsion containing: in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate 0 % — 31.12.2018 ex37071000 30 Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate 0 % — 31.12.2018 ex37071000 35 Sensitising emulsion or preparation containing one or more of: containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate 0 % — 31.12.2021 ex37071000 40 Sensitising emulsion, containing: dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate 0 % — 31.12.2021 ex37071000 45 Photosensitive emulsion consisting of cyclized polyisoprene containing: 0 % — 31.12.2019 ex37071000 50 Photosensitive emulsion containing by weight: 0 % — 31.12.2019 ex37071000 55 Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidone with a polymer content by weight 10 % or more 0 % — 31.12.2018 ex37079029 10 Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % — 31.12.2018 ex37079029 20 Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % — 31.12.2018 ex37079029 40 Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % — 31.12.2018 ex37079029 50 Dry ink powder or toner blend, consisting of: for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers 0 % — 31.12.2017 ex38019000 10 Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6) 0 % — 31.12.2021 ex38021000 10 Mixture of activated carbon and polyethylene, in form of powder 0 % — 31.12.2020 ex38029000 11 Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products 0 % — 31.12.2017 38059010 Pine oil 1,7 % — 31.12.2018 ex38069000 ex39094000 10 60 Phenolic modified derivative of rosin resin, of a kind used in offset printing 0 % — 31.12.2021 ex38089190 10 Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide 0 % — 31.12.2018 ex38089190 30 Preparation containing endospores or spores and protein crystals derived from either: 0 % — 31.12.2019 ex38089190 40 Spinosad (ISO) 0 % — 31.12.2018 ex38089190 60 Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5,6-dihydro spinosyn J) and (3'-ethoxy- spinosyn L) 0 % — 31.12.2017 ex38089230 10 Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more 0 % — 31.12.2020 ex38089290 10 Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale 0 % — 31.12.2018 ex38089290 30 Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight: 0 % — 31.12.2018 ex38089290 50 Preparations based on copper pyrithione (CAS RN 14915-37-8) 0 % — 31.12.2019 ex38089315 10 Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension 0 % — 31.12.2017 ex38089323 10 Herbicide containing flazasulfuron (ISO) as an active ingredient 0 % — 31.12.2019 ex38089327 40 Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight: 0 % — 31.12.2021 ex38089390 10 Preparation, in the form of granules, containing by weight: 0 % — 31.12.2019 ex38089390 20 Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight: of a kind used in plant growth regulators 0 % — 31.12.2020 ex38089390 30 Aqueous solution containing by weight: for use in the manufacture of a plant growth regulator 0 % — 31.12.2020 ex38089390 40 Mixed white powder containing by weight: for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator 0 % — 31.12.2020 ex38089390 50 Preparation in the form of powder, containing by weight: of a kind used in plant growth regulators 0 % — 31.12.2020 ex38089420 30 Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing: 0 % — 31.12.2019 ex38089990 10 Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water 0 % — 31.12.2020 ex38089990 20 Abamectin (ISO) (CAS RN 71751-41-2) 0 % — 31.12.2018 ex38099100 10 Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate 0 % — 31.12.2018 ex38099200 20 Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol 0 % — 31.12.2019 ex38101000 10 Soldering or welding paste, consisting of a mixture of metals and resin containing by weight: for use in the electro technical industry 0 % — 31.12.2018 ex38111900 10 Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: 0 % — 31.12.2019 ex38112100 10 Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils 0 % — 31.12.2018 ex38112100 12 Dispersing agent containing: used in the manufacture of blends of additives for lubricating oils 0 % — 31.12.2020 ex38112100 13 Additives containing: having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 14 Dispersing agent: used in the manufacture of blends of additives for lubricating oils 0 % — 31.12.2020 ex38112100 15 Additives, consisting of: for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 16 Detergent containing: used in the manufacture of blends of additives for lubricating oils 0 % — 31.12.2020 ex38112100 17 Additives containing: for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 18 Detergent containing: used in the manufacture of blends of additives for lubricating oils 0 % — 31.12.2020 ex38112100 20 Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil 0 % — 31.12.2018 ex38112100 25 Additives containing: for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 27 Additives containing: for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 30 Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2017 ex38112100 33 Additives containing: having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils 0 % — 31.12.2018 ex38112100 35 Additives containing: for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 37 Additives containing: for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 45 Additives containing: whether or not containing a methacrylic pour point depressant polymer, for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 48 Additives containing: having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112100 50 Additives for lubricating oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2017 ex38112100 53 Additives containing: having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112100 55 Additives containing: having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112100 57 Additives containing: having a total base number of more than 40, for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112100 60 Additives for lubricating oils, containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2017 ex38112100 63 Additives containing: having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112100 65 Additives containing: having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112100 70 Additives for lubricating oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2017 ex38112100 73 Additives containing: for use in the manufacture of additive mixtures for lubricating oils 0 % — 31.12.2018 ex38112100 75 Additives containing: with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils 0 % — 31.12.2020 ex38112100 77 Antifoam additives consisting of: for use in the manufacture of additive blends for lubricating oils 0 % — 31.12.2020 ex38112100 80 Additives containing: with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils 0 % — 31.12.2020 ex38112100 83 Additives containing: for use in the manufacture of additives blends for lubricating oils 0 % — 31.12.2019 ex38112100 85 Additives, of a kind used in the manufacture of blends of additives for lubricating oils 0 % — 31.12.2017 ex38112900 15 Additives containing: for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112900 20 Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils 0 % — 31.12.2017 ex38112900 25 Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112900 30 Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2017 ex38112900 35 Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112900 40 Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils 0 % — 31.12.2017 ex38112900 45 Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils 0 % — 31.12.2019 ex38112900 50 Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2017 ex38112900 55 Additives consisting of reaction products of diphenylamine and branched nonenes with: used for the manufacture of lubricating oils 0 % — 31.12.2019 ex38112900 60 Additives containing: for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112900 65 Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils 0 % — 31.12.2020 ex38112900 70 Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112900 80 Additives containing: for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38112900 85 Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils 0 % — 31.12.2018 ex38119000 10 Dinonylnaphthylsulphonic acid salt, in a mineral oil solution 0 % — 31.12.2018 ex38119000 40 Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % of 2-ethylhexanol 0 % — 31.12.2017 ex38121000 10 Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7) 0 % — 31.12.2021 ex38122090 10 Plasticiser, containing: 0 % — 31.12.2018 ex38123910 10 4,4'-Isopropylidenediphenol C12-15 alcohol phosphite containing by weight 1 % or more but not more than 3 % of bisphenol A (CAS RN 96152-48-6) 0 % — 31.12.2019 ex38123990 20 Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate 0 % — 31.12.2018 ex38123990 25 UV photo stabiliser containing: 0 % — 31.12.2018 ex38123990 30 Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol 0 % — 31.12.2019 ex38123990 35 Mixture containing by weight: 0 % — 31.12.2018 ex38123990 40 Mixture of: 0 % — 31.12.2018 ex38123990 55 UV-stabilizer, containing: 0 % — 31.12.2021 ex38123990 65 Stabiliser for plastic material containing: 0 % — 31.12.2021 ex38123990 70 Light stabiliser containing: 0 % — 31.12.2021 ex38123990 80 UV-stabilizer, consisting of: 0 % — 31.12.2017 ex38140090 20 Mixture containing by weight: 0 % — 31.12.2018 ex38140090 40 Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether 0 % — 31.12.2018 ex38151200 10 Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver 0 % — 31.12.2018 ex38151990 10 Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method) 0 % — 31.12.2021 ex38151990 13 Catalyst consisting of: on a support of aluminium oxide (CAS RN 1344-28-1) 0 % — 31.12.2021 ex38151990 15 Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile 0 % — 31.12.2018 ex38151990 20 Catalyst, for use in the manufacture of acrylic acid 0 % — 31.12.2018 ex38151990 25 Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde 0 % — 31.12.2018 ex38151990 30 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene 0 % — 31.12.2018 ex38151990 65 Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide 0 % — 31.12.2018 ex38151990 70 Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide 0 % — 31.12.2018 ex38151990 75 Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide 0 % — 31.12.2018 ex38151990 80 Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil 0 % — 31.12.2018 ex38151990 85 Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder 0 % — 31.12.2018 ex38151990 86 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins 0 % — 31.12.2018 ex38151990 ex85069000 87 10 Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) 0 % — 31.12.2017 ex38159090 16 Initiator based on dimethylaminopropyl urea 0 % — 31.12.2017 ex38159090 18 Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO’)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3) 0 % — 31.12.2017 ex38159090 20 Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight: 0 % — 31.12.2018 ex38159090 30 Catalyst, consisting of a suspension in mineral oil of: 0 % — 31.12.2020 ex38159090 33 Catalyst, consisting of a mixture of different alkylnaphthalene sulphonic acids, with aliphatic hydrocarbon chains, containing 12 – 56 carbon atoms 0 % — 31.12.2018 ex38159090 40 Catalyst: for use in the manufacture of acrylic acid 0 % — 31.12.2018 ex38159090 50 Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium 0 % — 31.12.2018 ex38159090 70 Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols 0 % — 31.12.2019 ex38159090 71 Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol 0 % — 31.12.2017 ex38159090 80 Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol 0 % — 31.12.2020 ex38159090 81 Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate 0 % — 31.12.2018 ex38159090 85 Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins 0 % — 31.12.2017 ex38159090 86 Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide 0 % — 31.12.2018 ex38159090 88 Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: 0 % — 31.12.2018 ex38159090 89 Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile 0 % — 31.12.2021 ex38170050 10 Mixture of alkylbenzenes (C14-26) containing by weight: 0 % — 31.12.2018 ex38170080 10 Mixture of alkylnaphthalenes, containing by weight: 0 % — 31.12.2018 ex38170080 20 Mixture of branched alkyl benzenes mainly containing dodecyl benzenes 0 % — 31.12.2018 ex38170080 30 Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms 0 % — 31.12.2021 ex38190000 20 Fire resistant hydraulic fluid based on phosphate ester 0 % — 31.12.2018 ex38231930 ex38231930 20 30 Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of: 0 % — 31.12.2018 ex38231990 ex38231990 20 30 Palm acid oils from refining for use in the manufacture of: 0 % — 31.12.2018 ex38249915 10 Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets 0 % — 31.12.2018 ex38249992 21 Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in Toluene 0 % — 31.12.2020 ex38249992 22 Aqueous solution containing by weight 0 % — 31.12.2020 ex38249992 23 Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol 0 % — 31.12.2020 ex38249992 24 Mixture containing two or more of the following acrylates; 0 % — 31.12.2021 ex38249992 32 Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0) 0 % — 31.12.2019 ex38249992 ex38249993 ex38249996 33 40 40 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: 0 % — 31.12.2018 ex38249992 34 Oligomer of tetrafluoroethylene, having one iodoethyl end-group 0 % — 31.12.2018 ex38249992 35 Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate 0 % — 31.12.2017 ex38249992 36 Calcium phosphonate phenate, dissolved in mineral oil 0 % — 31.12.2021 ex38249992 37 Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 % 0 % — 31.12.2018 ex38249992 39 Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol 0 % — 31.12.2017 ex38249992 42 Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene 0 % — 31.12.2018 ex38249992 44 Preparation containing by weight: 0 % — 31.12.2020 ex38249992 45 Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors 0 % — 31.12.2018 ex38249992 46 Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran 0 % — 31.12.2020 ex38249992 47 Preparation, containing: 0 % — 31.12.2017 ex38249992 48 Mixture of: 0 % — 31.12.2017 ex38249992 49 Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0) 0 % — 31.12.2017 ex38249992 50 Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses 0 % — 31.12.2017 ex38249992 51 Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid 0 % — 31.12.2018 ex38249992 53 Preparations consisting predominantly of ethylene glycol and: for the manufacture of electrolytic capacitors 0 % — 31.12.2018 ex38249992 54 Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8) 0 % — 31.12.2021 ex38249992 55 Additives for paints and coatings, containing: 0 % — 31.12.2018 ex38249992 56 Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units 0 % — 31.12.2019 ex38249992 57 Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units 0 % — 31.12.2019 ex38249992 58 2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile 0 % — 31.12.2018 ex38249992 59 Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran 0 % — 31.12.2018 ex38249992 60 N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 % 0 % — 31.12.2020 ex38249992 61 3',4’,5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4’,5'-trifluorobiphenyl-2-amine 0 % — 31.12.2020 ex38249992 64 Preparation containing by weight: 0 % — 31.12.2021 ex38249992 65 Mixture of primary tert-alkylamines 0 % — 31.12.2019 ex38249992 68 Preparation containing by weight: Dissolved in: 0 % — 31.12.2020 ex38249992 69 Preparation containing by weight: 0 % — 31.12.2020 ex38249992 70 Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine 0 % — 31.12.2019 ex38249992 72 N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7) 0 % — 31.12.2018 ex38249992 73 α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] 0 % — 31.12.2018 ex38249992 74 C6-24 and C16-18-Unsaturated fatty acid esters with sucrose (sucrose polysoyate) (CAS RN 93571-82-5) 0 % — 31.12.2018 ex38249992 ex39069090 75 87 Aqueous solution of polymers and ammonia consisting of: 0 % — 31.12.2018 ex38249992 76 Preparation containing: 0 % — 31.12.2018 ex38249992 78 Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents 0 % — 31.12.2018 ex38249992 80 Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6) 0 % — 31.12.2017 ex38249992 81 Preparation consisting of: with a boiling point of 160 °C or more but not more than 180 °C 0 % — 31.12.2018 ex38249992 82 T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene 0 % — 31.12.2019 ex38249992 83 Preparation, consisting of two or more of the following glycols: 0 % — 31.12.2017 ex38249992 84 Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: 0 % — 31.12.2018 ex38249992 ex38249993 86 57 Liquid crystal mixture for use in the manufacture of displays 0 % — 31.12.2017 ex38249992 88 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated 0 % — 31.12.2020 ex38249993 35 Paraffin with a level of chlorination of 70 % or more 0 % — 31.12.2019 ex38249993 42 Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea 0 % — 31.12.2018 ex38249993 50 Preparation, consisting of acesulfame potassium (CAS RN 55589-62-3) and potassium hydroxide (CAS RN 1310-58-3) 0 % — 31.12.2021 ex38249993 53 Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder 0 % — 31.12.2018 ex38249993 55 Mixture containing by weight 0 % — 31.12.2021 ex38249993 63 Mixture of phytosterols, not in the form of powder, containing by weight: for use in the manufacture of stanols/sterols or stanol/sterol esters 0 % — 31.12.2017 ex38249993 70 Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane) 0 % — 31.12.2019 ex38249993 73 Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups 0 % — 31.12.2018 ex38249993 75 Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols 0 % — 31.12.2019 ex38249993 77 Powder mixture containing by weight: 0 % — 31.12.2018 ex38249993 ex38249996 80 67 Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material 0 % — 31.12.2019 ex38249993 ex38249996 83 85 Preparation containing: in which the gas formation from C,C’-azodi(formamide) occurs at 135 °C 0 % — 31.12.2017 ex38249993 ex38249996 85 57 Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges 0 % — 31.12.2018 ex38249993 88 Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder, containing by weight: 0 % — 31.12.2017 ex38249996 35 Calcined bauxite (refractory grade) 0 % — 31.12.2018 ex38249996 37 Structured silica alumina phosphate 0 % — 31.12.2019 ex38249996 46 Manganese zinc ferrite granulate, containing by weight: 0 % — 31.12.2020 ex38249996 47 Mixed metals oxides, in the form of powder, containing by weight: for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors 0 % — 31.12.2018 ex38249996 48 Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 % 0 % — 31.12.2020 ex38249996 50 Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators 0 % — 31.12.2017 ex38249996 55 Carrier in powder form, consisting of: to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers 0 % — 31.12.2018 ex38249996 60 Fused magnesia containing by weight 15 % or more of dichromium trioxide 0 % — 31.12.2021 ex38249996 63 Catalyst containing by weight of 0 % — 31.12.2018 ex38249996 65 Aluminium sodium silicate, in the form of spheres of a diameter of: 0 % — 31.12.2018 ex38249996 73 Reaction product, containing by weight: 0 % — 31.12.2019 ex38249996 75 Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics: for use in the manufacture of particle filters in motor vehicles 0 % m3 31.12.2018 ex38249996 77 Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide 0 % — 31.12.2019 ex38249996 79 Paste containing by weight: 0 % — 31.12.2017 ex38249996 87 Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: 0 % — 31.12.2017 ex38260010 ex38260010 20 29 Mixture of fatty acid methyl esters containing by weight at least: for use in the manufacture of detergents and home and personal care products 0 % — 31.12.2018 ex38260010 ex38260010 30 39 Mixture of fatty acid methyl esters containing by weight at least: for use in the manufacture of agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components 0 % — 31.12.2018 ex38260010 ex38260010 40 49 Mixture of fatty acid methyl esters containing by weight at least: for use in the manufacture of detergents and home and personal cleaning products, agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components 0 % — 31.12.2018 ex39011010 ex39019080 20 50 High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, with 0 % — 31.12.2019 ex39011010 40 Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with 0 % m3 31.12.2018 ex39011090 20 Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a haze value not more than 6 % and an elongation at break (MD/TD) of 210/340 0 % m3 31.12.2018 ex39011090 30 Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper 0 % — 31.12.2021 ex39012090 10 Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon 0 % m3 31.12.2018 ex39012090 20 Polyethylene, containing by weight 35 % or more but not more than 45 % of mica 0 % — 31.12.2018 ex39019080 53 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with 0 % m3 31.12.2020 ex39019080 55 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: 0 % — 31.12.2020 ex39019080 57 Octene linear low-density polyethylene (LLDPE) in the form of pellets of a kind used in the co-extrusion processing of films for flexible food packaging with: 0 % m3 31.12.2020 ex39019080 63 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with: for use in the co-extrusion processing of films for flexible food packaging 0 % m3 31.12.2020 ex39019080 65 Linear low-density polyethylene (LLDPE) (CAS RN 9002-88-4) in the form of powder, with 0 % m3 31.12.2018 ex39019080 67 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more 0 % — 31.12.2020 ex39019080 70 Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3 g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238) 0 % — 31.12.2020 ex39019080 73 Mixture containing by weight 0 % — 31.12.2021 ex39019080 80 Block copolymer of ethylene with octene in the form of pellets: for use in the manufacture of napkin liners for babies 0 % — 31.12.2020 ex39019080 91 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid 4 % — 31.12.2018 ex39019080 92 Chlorosulphonated polyethylene 0 % — 31.12.2018 ex39019080 93 Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets 0 % — 31.12.2018 ex39019080 94 Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene 0 % — 31.12.2018 ex39019080 97 Chlorinated polyethylene, in the form of powder 0 % — 31.12.2018 ex39021000 10 Polypropylene containing no plasticiser and not more than: 0 % — 31.12.2018 ex39021000 20 Polypropylene, containing no plasticiser, 0 % — 31.12.2018 ex39021000 30 Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses 0 % — 31.12.2018 ex39021000 40 Polypropylene, containing no plasticiser: 0 % — 31.12.2019 ex39021000 50 High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties: 0 % m3 31.12.2020 ex39022000 10 Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800 0 % — 31.12.2018 ex39022000 20 Hydrogenated polyisobutene, in liquid form 0 % — 31.12.2018 ex39023000 91 A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 0 % — 31.12.2018 ex39023000 95 A-B-A block copolymer, consisting of: 0 % — 31.12.2021 ex39023000 97 Liquid ethylene-propylene-copolymer with: 0 % — 31.12.2021 ex39029090 52 Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin 0 % — 31.12.2018 ex39029090 55 Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene 0 % — 31.12.2018 ex39029090 60 Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: 0 % — 31.12.2019 ex39029090 92 Polymers of 4-methylpent-1-ene 0 % — 31.12.2018 ex39029090 94 Chlorinated polyolefins, whether or not in a solution or dispersion 0 % — 31.12.2018 ex39029090 98 Synthetic poly-alpha-olefin with a viscosity at 100o Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene 0 % — 31.12.2021 ex39031100 10 White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK at a density of 14,0 kg/m3 (± 1,5 kg/m3), containing 50 % recycled material 0 % m3 31.12.2018 ex39031900 40 Crystalline polystyrene with: 0 % — 31.12.2021 ex39039090 15 Copolymer in the form of granules containing by weight: 0 % — 31.12.2017 ex39039090 20 Copolymer in the form of granules containing by weight: 0 % — 31.12.2021 ex39039090 25 Copolymer in the form of granules containing by weight: 0 % — 31.12.2021 ex39039090 ex39119099 35 43 Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C 0 % — 31.12.2018 ex39039090 ex39119099 40 50 Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6000 0 % — 31.12.2018 ex39039090 45 Preparation, in form of powder, containing by weight: 0 % m3 31.12.2019 ex39039090 46 Copolymer in the form of granules containing by weight: 0 % m3 31.12.2020 ex39039090 55 Preparation, in form of an aqueous suspension, containing by weight: 0 % — 31.12.2019 ex39039090 ex39119099 60 60 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form 0 % — 31.12.2021 ex39039090 65 Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8) 0 % — 31.12.2020 ex39039090 70 Copolymer in the form of granules containing by weight: 0 % m3 31.12.2020 ex39039090 80 Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight: for use in the manufacture of ion exchange resins 0 % — 31.12.2018 ex39039090 86 Mixture containing by weight: and with one or more of the following special colour effects: 0 % — 31.12.2018 ex39041000 20 Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with: for use in the manufacture of battery separators 0 % — 31.12.2019 ex39043000 ex39044000 30 91 Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink 0 % — 31.12.2018 ex39044000 93 Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 % (± 1 %) of vinyl chloride and 20 % (± 1 %) of methyl acrylate, in the form of a aqueous emulsion 0 % — 31.12.2018 ex39045090 92 Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments 0 % — 31.12.2019 ex39046100 20 Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions 0 % — 31.12.2018 ex39046100 30 Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not more than 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm 0 % — 31.12.2018 ex39046980 81 Poly(vinylidene fluoride) (CAS RN 24937-79-9) 0 % — 31.12.2020 ex39046980 85 Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers 0 % — 31.12.2017 ex39046980 93 Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39 0 % — 31.12.2018 ex39046980 94 Copolymer of ethylene and tetrafluoroethylene 0 % — 31.12.2018 ex39046980 96 Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 0 % — 31.12.2018 ex39046980 97 Copolymer of chlorotrifluoroethylene and vinylidene difluoride 0 % — 31.12.2018 ex39053000 10 Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors 0 % — 31.12.2017 ex39059100 30 Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing not more than 32 % by weight of ethylene 0 % — 31.12.2017 ex39059990 92 Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water 0 % — 31.12.2018 ex39059990 95 Hexadecylated or eicosylated polyvinylpyrrolidone 0 % — 31.12.2018 ex39059990 96 Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight: 0 % — 31.12.2018 ex39059990 97 Povidone (INN)-iodine (CAS RN 25655-41-8) 0 % — 31.12.2018 ex39059990 98 Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups 0 % — 31.12.2018 39069060 Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide 0 % — 31.12.2018 ex39069090 10 Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004 0 % — 31.12.2018 ex39069090 15 Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer 0 % — 31.12.2018 ex39069090 27 Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate 0 % — 31.12.2017 ex39069090 30 Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 6000 0 % — 31.12.2018 ex39069090 33 Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm 0 % — 31.12.2020 ex39069090 35 White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water 0 % — 31.12.2018 ex39069090 37 Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm 0 % — 31.12.2020 ex39069090 40 Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with: 0 % — 31.12.2020 ex39069090 41 Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30 0 % — 31.12.2019 ex39069090 50 Polymers of esters of acrylic acid with one or more of the following monomers in the chain: containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39 0 % — 31.12.2018 ex39069090 65 Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC) 0 % — 31.12.2018 ex39069090 73 Preparation containing by weight: 0 % — 31.12.2019 ex39069090 80 Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) 0 % — 31.12.2018 ex39071000 10 Mixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene 0 % — 31.12.2020 ex39071000 20 Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine 0 % — 31.12.2020 ex39072011 10 Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more 0 % — 31.12.2018 ex39072011 20 Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40000 0 % — 31.12.2018 ex39072011 60 Preparation containing: 0 % — 31.12.2021 ex39072020 20 Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1) 0 % — 31.12.2017 ex39072020 25 Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight: 0 % — 31.12.2021 ex39072020 30 Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone 0 % — 31.12.2018 ex39072020 40 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100) 0 % — 31.12.2018 ex39072020 ex39072099 50 75 Poly(p-phenylene oxide) in the form of powder 0 % — 31.12.2019 ex39072099 15 Poly(oxypropylene) having alkoxysilyl end-groups 0 % — 31.12.2018 ex39072099 30 Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) 0 % — 31.12.2018 ex39072099 35 Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate 0 % — 31.12.2018 ex39072099 45 Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups 0 % — 31.12.2018 ex39072099 50 Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient 0 % — 31.12.2018 ex39072099 55 Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5000 0 % — 31.12.2018 ex39072099 60 Polytetramethylene oxide di-p-aminobenzoate 0 % — 31.12.2021 ex39072099 65 L-Lysine N-hydroxysuccinimidyl ester.alpha.,.epsilon.-bis(polyethylene glycol monomethylether carbamate) (CAS RN 266318-38-1) of a number average molecular weight (Mn) of 38000 or more but not more than 40000 0 % — 31.12.2018 ex39072099 70 α-[3-(3-Maleimido-1-oxopropyl)amino]propyl-ω-methoxy, polyoxyethylene (CAS RN 883993-35-9) 0 % — 31.12.2019 ex39073000 15 Epoxide resin, halogen-free, for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits 0 % — 31.12.2020 ex39073000 25 Epoxide resin 0 % — 31.12.2020 ex39073000 ex39269097 40 70 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 8548 0 % — 31.12.2018 ex39073000 50 Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with: 0 % — 31.12.2018 ex39073000 60 Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5) 0 % — 31.12.2017 ex39074000 35 α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2) 0 % — 31.12.2018 ex39074000 70 Polycarbonate of phosgene and bisphenol A: 0 % — 31.12.2019 ex39074000 80 Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps 0 % — 31.12.2019 ex39076900 10 Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol 0 % — 31.12.2018 ex39076900 40 Poly(ethylene terephthalate) pellets or granules: 0 % m3 31.12.2021 ex39076900 ex39269092 50 40 Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of: with a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa 0 % — 31.12.2017 ex39076900 60 Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups 0 % — 31.12.2018 39077000 Poly(lactic acid) 0 % — 31.12.2018 ex39079190 10 Diallyl phthalate prepolymer, in powder form 0 % — 31.12.2019 ex39079905 20 Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers 0 % — 31.12.2018 ex39079980 10 Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder 0 % — 31.12.2018 ex39079980 25 Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol 0 % — 31.12.2017 ex39079980 ex39139000 30 20 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) 0 % — 31.12.2020 ex39079980 40 Polycarbonate of phosgene, bisphenol A, resorcinol, isophthaloyl chloride, terephthaloyl chloride andpolysiloxane, with p-cumylphenolendcaps, and a weight average molecular weight (Mw) of 24100 or more but not more than 25900 0 % — 31.12.2019 ex39079980 60 Copolymer of terephthalic acid and isophthalic acid with bisphenol A 0 % — 31.12.2017 ex39079980 70 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol 0 % — 31.12.2019 ex39079980 80 Copolymer, consisting of 72 % by weight or more of terephthalic acid and/or derivatives thereof and cyclohexanedimethanol, completed with linear and/or cyclic dioles 0 % — 31.12.2020 ex39089000 10 Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39 0 % — 31.12.2018 ex39089000 30 Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine 0 % — 31.12.2018 ex39089000 55 1,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine (CAS RN 169284-22-4) 0 % — 31.12.2020 ex39089000 60 Copolymer consisting of: 0 % — 31.12.2017 ex39089000 70 Copolymer containing: whether or not containing isophthalic acid (CAS RN 121-91-5) 0 % — 31.12.2019 ex39094000 10 Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm 0 % — 31.12.2018 ex39094000 20 Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices 0 % — 31.12.2020 ex39094000 30 Mixture of: 0 % — 31.12.2017 ex39094000 40 Polymer in powder form with a content of: 0 % — 31.12.2018 ex39095090 10 UV curable water soluble liquid photopolymer consisting of a mixture by weight of 0 % — 31.12.2019 ex39095090 20 Preparation containing by weight: 0 % — 31.12.2019 ex39095090 30 Preparation containing by weight: 0 % — 31.12.2019 ex39095090 40 Preparation containing by weight: 0 % — 31.12.2019 ex39100000 15 Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated 0 % — 31.12.2020 ex39100000 20 Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] 0 % — 31.12.2018 ex39100000 25 Preparations containing by weight: 0 % — 31.12.2021 ex39100000 35 Preparations containing by weight: 0 % — 31.12.2021 ex39100000 40 Silicones of a kind used in the manufacture of long term surgical implants 0 % — 31.12.2021 ex39100000 50 Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum 0 % — 31.12.2017 ex39100000 60 Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups 0 % — 31.12.2019 ex39100000 70 Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices 0 % — 31.12.2018 ex39100000 80 Monomethacryloxypropylterminated poly(dimethylsiloxane) 0 % — 31.12.2019 ex39111000 81 Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with: 0 % — 31.12.2018 ex39119019 20 Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing: and each separate component containing: 0 % — 31.12.2018 ex39119019 30 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide 0 % — 31.12.2017 ex39119019 40 m- Xylene formaldehyde resin 0 % — 31.12.2021 ex39119019 50 Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form 0 % — 31.12.2019 ex39119019 60 Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS RN 60806-48-6) 0 % — 31.12.2019 ex39119019 70 Preparation, containing: 0 % — 31.12.2019 ex39119099 25 Copolymer of vinyltoluene and α-methylstyrene 0 % — 31.12.2018 ex39119099 30 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated 0 % — 31.12.2020 ex39119099 35 Alternated copolymer of ethylene and maleic anhydride (EMA) 0 % — 31.12.2020 ex39119099 40 Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight 0 % — 31.12.2018 ex39119099 45 Copolymer of maleic acid and methyl vinyl ether 0 % — 31.12.2018 ex39119099 53 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4) 0 % — 31.12.2017 ex39119099 57 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0) 0 % — 31.12.2017 ex39119099 65 Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether 0 % — 31.12.2018 ex39119099 86 Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9) 0 % — 31.12.2021 ex39121100 30 Cellulose triacetate (CAS RN 9012-09-3) 0 % — 31.12.2021 ex39121100 40 Cellulose diacetate powder 0 % — 31.12.2020 ex39123985 10 Ethylcellulose, not plasticized 0 % — 31.12.2018 ex39123985 20 Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose 0 % — 31.12.2018 ex39123985 30 Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms 0 % — 31.12.2018 ex39123985 40 Hypromellose (INN) (CAS RN 9004-65-3) 0 % — 31.12.2021 ex39123985 50 Polyquaternium 10 (CAS RN 68610-92-4) 0 % — 31.12.2020 ex39129010 10 Cellulose acetate propionate, non-plasticised, in the form of powder: for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings 0 % — 31.12.2018 ex39129010 20 Hydroxypropyl methylcellulose phthalate 0 % — 31.12.2018 ex39139000 85 Sterile sodium hyaluronate (CAS RN 9067-32-7) 0 % — 31.12.2018 ex39139000 92 Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100000 to 300000 0 % — 31.12.2018 ex39139000 95 Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9) 0 % — 31.12.2018 ex39162000 91 Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives: 0 % — 31.12.2019 ex39169010 10 Rods with cellular structure, containing by weight: 0 % — 31.12.2018 ex39173200 91 Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not more than 110 μm 0 % — 31.12.2018 ex39174000 91 Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses 0 % — 31.12.2019 ex39191019 ex39191080 ex39199080 10 25 31 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film 0 % — 31.12.2018 ex39191019 20 Rolls of two-sided adhesive tape: 0 % — 31.12.2018 ex39191080 ex39199080 27 20 Polyester film: 0 % — 31.12.2019 ex39191080 35 Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film 0 % — 31.12.2018 ex39191080 37 Polytetrafluoroethylene film: 0 % — 31.12.2020 ex39191080 ex39199080 40 43 Black poly(vinyl chloride) film: 0 % — 31.12.2017 ex39191080 ex39199080 43 26 Ethylene vinyl acetate film: 0 % — 31.12.2020 ex39191080 ex39199080 45 45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm 0 % — 31.12.2017 ex39191080 ex39199080 47 32 Polyester, polyurethane or polycarbonate foil: of a kind used for the protection of the surface of products of headings 8521 and 8528 0 % — 31.12.2017 ex39191080 ex39199080 ex39201089 50 41 25 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs 0 % — 31.12.2018 ex39191080 ex39199080 ex39201028 ex39201089 53 34 93 50 Polyethylene foil: of a kind used for the protection of the surface of products of headings 8521 and 8528 0 % — 31.12.2017 ex39191080 ex39199080 55 53 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 o of more than 25 N/cm (as determined by the ASTM D 3330 method) 0 % — 31.12.2017 ex39191080 ex39199080 ex39206100 57 30 30 Reflecting sheet: 0 % — 31.12.2018 ex39191080 60 Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet 0 % — 31.12.2018 ex39191080 63 Reflecting film consisting of 0 % — 31.12.2020 ex39191080 ex39199080 70 75 Rolls of polyethylene foil: of a kind used for the protection of the surface of products of headings 8521 or 8528 0 % — 31.12.2021 ex39191080 ex39199080 73 50 Self-adhesive reflecting sheet whether or not in segmented pieces, the reflective sheet consists of: 0 % — 31.12.2018 ex39191080 ex39199080 75 80 Self-adhesive reflecting film, consisting of several layers including: 0 % — 31.12.2021 ex39191080 ex39199080 85 28 Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film: 0 % — 31.12.2019 ex39199080 19 Transparent poly(ethylene terephthalate) self-adhesive film: 0 % — 31.12.2018 ex39199080 23 Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner 0 % — 31.12.2018 ex39199080 24 Reflecting laminated sheet: 0 % — 31.12.2019 ex39199080 25 Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner 0 % — 31.12.2017 ex39199080 27 Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V 0 % — 31.12.2018 ex39199080 29 Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7 cm or more but not more than 132 cm (supplied with a release liner) 0 % — 31.12.2019 ex39199080 33 Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm 0 % — 31.12.2018 ex39199080 35 Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: 0 % — 31.12.2018 ex39199080 ex39204910 36 95 Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) 0 % m2 31.12.2017 ex39199080 38 Self-adhesive film composed of: 0 % — 31.12.2017 ex39199080 39 Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100 μm 0 % — 31.12.2018 ex39199080 40 Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film: 0 % — 31.12.2017 ex39199080 42 Self-adhesive film composed of: 0 % — 31.12.2017 ex39199080 ex39219060 44 95 Printed laminated sheet 0 % m2 31.12.2017 ex39199080 ex90012000 47 40 Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side 0 % — 31.12.2017 ex39199080 49 Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet 0 % — 31.12.2018 ex39199080 51 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet 0 % — 31.12.2018 ex39199080 52 White polyolefin tape consisting of: 0 % — 31.12.2020 ex39199080 54 Poly(vinyl chloride) film, on one side covered with whether or not on the other side covered with an adhesive layer and a metallised polymer layer 0 % — 31.12.2019 ex39199080 60 Reflecting film containing: 0 % — 31.12.2020 ex39199080 63 Co-extruded trilayer film, 0 % — 31.12.2020 ex39199080 65 Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner 0 % — 31.12.2020 ex39199080 67 Self-adhesive plastic film consisting of: 0 % m2 31.12.2018 ex39199080 70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad 0 % — 31.12.2020 ex39199080 81 Film of a minimum thickness of 0,36 mm, consisting of the following: and covered on one side with a release liner 0 % — 31.12.2018 ex39201025 ex39201089 10 20 Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber 0 % — 31.12.2018 ex39201025 20 Film of polyethylene, of a kind used for typewriter ribbon 0 % — 31.12.2018 ex39201028 30 Printed embossed film 0 % — 31.12.2019 ex39201028 91 Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: 0 % — 31.12.2018 ex39201040 30 Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of: and having an overall total thickness of not more than 110 μm 0 % — 31.12.2017 ex39201040 40 Tubular layered film predominately of polyethylene: 0 % — 31.12.2020 ex39201089 30 Ethylene vinyl acetate (EVA) film with: 0 % — 31.12.2021 ex39201089 40 Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm 0 % — 31.12.2021 ex39202021 30 Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm 0 % — 31.12.2018 ex39202021 40 Sheets of biaxially — oriented polypropylene film: 0 % — 31.12.2021 ex39202029 ex39202080 55 93 Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: and having an overall total thickness of not more than 110 μm 0 % — 31.12.2017 ex39202029 60 Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: as determined by test method ASTM D882/ISO 527-3 0 % — 31.12.2018 ex39202029 70 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: 0 % — 31.12.2019 ex39202029 94 Co-extruded trilayer film, 0 % — 31.12.2017 ex39202080 92 Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not more than 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester 0 % — 31.12.2018 ex39202080 95 Polypropylene sheet, put up in rolls, with: for use in the manufacture of insulators used in the electronics and electrical industries 0 % m3 31.12.2017 ex39204310 92 Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride) 0 % — 31.12.2018 ex39204310 ex39204910 94 93 Film of a specular gloss of 70 or more, measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading 9403 0 % — 31.12.2018 ex39204310 95 Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet 0 % — 31.12.2018 ex39204910 30 Film of a (polyvinyl)chloride-copolymer 0 % — 31.12.2018 ex39205100 20 Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm 0 % — 31.12.2018 ex39205100 30 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm 0 % — 31.12.2018 ex39205100 40 Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690) 0 % — 31.12.2018 ex39206219 02 Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black 0 % — 31.12.2018 ex39206219 08 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either: 0 % — 31.12.2018 ex39206219 12 Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material 0 % — 31.12.2018 ex39206219 18 Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material 0 % — 31.12.2018 ex39206219 20 Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers 0 % — 31.12.2018 ex39206219 38 Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm 0 % — 31.12.2018 ex39206219 48 Sheets or rolls of poly(ethylene terephthalate): 0 % — 31.12.2020 ex39206219 52 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method) 0 % — 31.12.2018 ex39206219 60 Poly (ethylene terephtalate) film: 0 % — 31.12.2017 ex39206219 ex39206900 73 40 Iridescent film of polyester and poly(methyl methacrylate) 0 % — 31.12.2018 ex39206219 76 Transparent poly(ethylene terephthalate) film: 0 % — 31.12.2018 ex39206900 20 Film of poly(ethylene naphthalene-2,6-dicarboxylate) 0 % — 31.12.2018 ex39206900 50 Monolayer, biaxially oriented film: 0 % — 31.12.2019 ex39206900 60 Monolayer, transverse oriented, shrink film: 0 % — 31.12.2019 ex39207910 10 Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm 0 % p/st 31.12.2019 ex39209100 51 Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticiser 0 % — 31.12.2019 ex39209100 52 Poly(vinyl butyral) film: 0 % — 31.12.2019 ex39209100 91 Poly(vinyl butyral) film having a graduated coloured band 3 % — 31.12.2018 ex39209100 93 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: 0 % — 31.12.2019 ex39209100 95 Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser 0 % — 31.12.2018 ex39209200 30 Polyamide film: 0 % — 31.12.2018 ex39209928 35 Polyether imide sheets, in rolls, with 0 % — 31.12.2018 ex39209928 40 Polymer film containing the following monomers: 0 % — 31.12.2018 ex39209928 45 Transparent polyurethane film metallised on one side: 0 % — 31.12.2018 ex39209928 50 Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film 0 % — 31.12.2021 ex39209928 55 Thermoplastic polyurethane film extruded, with: of a kind used in the production of laminated safety glass 0 % — 31.12.2017 ex39209928 65 Matt, thermoplastic polyurethane foil in rolls with: 0 % m2 31.12.2019 ex39209928 70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: 0 % — 31.12.2021 ex39209928 75 Thermoplastic polyurethane foil in rolls with: 0 % m2 31.12.2019 ex39209959 25 Poly(1-chlorotrifluoroethylene) film 0 % — 31.12.2018 ex39209959 55 Ion-exchange membranes of fluorinated plastic material 0 % — 31.12.2018 ex39209959 65 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 % 0 % — 31.12.2018 ex39209990 20 Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays 0 % — 31.12.2018 ex39211310 10 Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092 0 % — 31.12.2018 ex39211310 20 Rolls of open-cell polyurethane foam: 0 % — 31.12.2017 ex39211900 30 Blocks with cellular structure, containing by weight: 0 % — 31.12.2018 ex39211900 40 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: of a kind used for the manufacture of alkaline battery separators 0 % — 31.12.2020 ex39211900 93 Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment 0 % — 31.12.2018 ex39211900 95 Film of polyethersulfone, of a thickness of not more than 200 μm 0 % — 31.12.2018 ex39211900 96 Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not more than 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not more than 40 μm 0 % — 31.12.2018 ex39219010 10 Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres 0 % — 31.12.2018 ex39219010 20 Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin 0 % — 31.12.2018 ex39219010 30 Multilayer film consisting of: 0 % m2 31.12.2018 ex39219055 20 Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring: for use in the manufacture of printed circuit boards 0 % — 31.12.2018 ex39219055 ex70194000 ex70194000 25 21 29 Prepreg sheets or rolls containing polyimide resin 0 % — 31.12.2019 ex39219055 40 Three layered fabric sheet, in rolls, 0 % — 31.12.2020 ex39219055 50 Glass fiber-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems 0 % m2 31.12.2020 ex39219060 30 Heat-, infra- and UV insulating poly(vinyl butyral) film: 0 % m2 31.12.2019 ex39219060 ex54077100 ex59039099 91 20 10 Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form 0 % — 31.12.2018 ex39219060 93 Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances 0 % — 31.12.2018 ex39231000 10 Photomask or wafer compacts: of a kind used in the photolithography or other semiconductor production to house photomasks or wafers 0 % — 31.12.2021 ex39233090 10 Polyethylene container, for compressed hydrogen: 0 % p/st 31.12.2018 ex39263000 ex87082990 10 10 Plastic cover of the exterior rear-view mirror for motor vehicles with clips 0 % p/st 31.12.2020 ex39263000 20 Plastic logo of the automobile manufacturer with mounting brackets on the back side, whether or not chromed, for use in the manufacture of goods of Chapter 87 0 % — 31.12.2021 ex39269092 20 Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material 0 % — 31.12.2018 ex39269092 30 Silicone shell for breast implant 0 % — 31.12.2021 ex39269097 10 Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm 0 % — 31.12.2018 ex39269097 15 Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems 0 % — 31.12.2018 ex39269097 ex85439000 20 15 Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls 0 % p/st 31.12.2019 ex39269097 25 Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm 0 % — 31.12.2018 ex39269097 30 Parts of car radio and car air-conditioner front panels 0 % — 31.12.2021 ex39269097 ex85389099 37 40 Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint 0 % p/st 31.12.2019 ex39269097 50 Knob of car radio front panel, made of Bisphenol A-based polycarbonate 0 % p/st 31.12.2018 ex39269097 55 Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not more than 1200 μm and of a weight of 21 g/m2 or more but not more than 42 g/m2 0 % m2 31.12.2018 ex39269097 65 Die-cast decoration element made of polycarbonate resin, coated with of a kind used in the manufacture of car radio front panels 0 % p/st 31.12.2018 ex40070000 10 Siliconated vulcanised rubber thread and cord 0 % — 31.12.2018 ex40094200 20 Rubber brake hose with of kind used in the manufacture of goods of Chapter 87 0 % — 31.12.2020 ex40103100 ex40103300 ex40103900 10 10 10 Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 87 0 % — 31.12.2021 ex40169300 20 Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow of the material in the place of mold split of not more than 0,25 mm, in the shape of a rectangle: 0 % — 31.12.2020 ex40169997 20 Soft rubber sealing stoppers for the manufacture of electrolytic capacitors 0 % — 31.12.2018 ex40169997 30 Tyre moulding bladder 0 % — 31.12.2021 ex41044119 10 Buffalo leather, split, chrome tanned synthetic retanned (crust), dry 0 % — 31.12.2017 41051000 41053090 Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 0 % — 31.12.2018 41062100 41062290 Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 0 % — 31.12.2018 41063100 41063200 41064090 41069200 Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114 0 % — 31.12.2018 ex44083930 10 Okoume veneer sheets: 0 % — 31.12.2018 ex44129940 ex44129950 ex44129985 10 10 20 Laminated wood consisting of two layers of sheets for veneering: for use in the manufacture of products falling within heading 4420, 4421, 4820, 4909 or 4911 0 % — 31.12.2021 ex50040010 10 Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk 0 % — 31.12.2021 ex50050010 ex50050090 10 10 Yarn spun entirely from silk waste (noil), not put up for retail sale 0 % — 31.12.2018 ex52053100 10 Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons 0 % — 31.12.2018 52081110 Fabrics for the manufacture of bandages, dressings and medical gauzes 5,2 % — 31.12.2018 ex54024500 20 Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid 0 % — 31.12.2018 ex54024700 20 Bicomponent monofilament yarn of not more than 30 dtex, consisting of: for use in the manufacture of filtration fabrics 0 % — 31.12.2020 ex54024900 30 Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures 0 % — 31.12.2018 ex54024900 50 Non-textured filament yarn of poly(vinyl alcohol) 0 % — 31.12.2018 ex54024900 70 Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn 0 % m 31.12.2018 ex54033900 10 Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry 0 % — 31.12.2020 ex54041900 20 Monofilament of poly(1,4-dioxanone) 0 % — 31.12.2018 ex54041900 50 Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers 0 % — 31.12.2018 ex54049090 20 Strip of polyimide 0 % — 31.12.2018 ex54071000 10 Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’–oxybis (phenyleneamine) 0 % — 31.12.2017 ex55031100 ex56013000 10 40 Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length of not more than 7 mm 0 % — 31.12.2018 ex55039000 ex55069000 ex56013000 20 10 10 Poly(vinyl alcohol) fibres, whether or not acetalized 0 % — 31.12.2018 ex55039000 30 Trilobal poly(thio-1,4-phenylene) fibres 0 % — 31.12.2019 ex56031110 ex56031190 ex56031210 ex56031290 ex56039110 ex56039190 ex56039210 ex56039290 10 10 10 10 10 10 10 10 Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: 0 % m2 31.12.2018 ex56031110 ex56031190 20 20 Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins 0 % m2 31.12.2017 ex56031290 ex56031390 ex56031490 ex56039290 ex56039390 ex56039490 30 30 10 60 40 30 Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles 0 % — 31.12.2018 ex56031290 50 Non-woven: for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles 0 % m2 31.12.2017 ex56031290 ex56031390 60 60 Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method) 0 % m2 31.12.2018 ex56031290 ex56031390 ex56039290 ex56039390 70 70 40 10 Non-wovens of polypropylene, 0 % m2 31.12.2018 ex56031310 ex56031410 10 10 Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical nonconductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material 0 % m2 31.12.2018 ex56031310 20 Non-woven of spunbonded polyethylene, with a coating, 0 % m2 31.12.2020 ex56031490 40 Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media: of a kind used for the manufacture of industrial filters 0 % m2 31.12.2018 ex56039290 ex56039390 20 20 Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene 0 % — 31.12.2018 ex56039290 ex56039490 70 40 Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene 0 % — 31.12.2018 ex56039290 ex56039390 80 50 Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments: for use in the manufacture of infant/child care products 0 % m2 31.12.2021 ex56039390 60 Nonwovens made of polyester fibres, suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters 0 % m2 31.12.2018 ex56039490 20 Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips 0 % — 31.12.2018 ex56075090 10 Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures 0 % — 31.12.2019 ex58030010 91 Gauze of cotton, of a width of less than 1500 mm 0 % — 31.12.2018 ex59031090 ex59032090 ex59039099 10 10 20 Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres 0 % — 31.12.2018 ex59032090 20 Two layers’ plastic-laminated textile fabric with: for use in the manufacture of the retractable roof of motor vehicles 0 % — 31.12.2021 ex59069990 10 Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine) 0 % — 31.12.2018 ex59070000 10 Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm 0 % — 31.12.2021 ex59111000 10 Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products 0 % — 31.12.2018 ex59119090 ex84219900 30 92 Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more 0 % — 31.12.2018 ex59119090 40 Multi-layered non-woven polyester polishing pads, impregnated with polyurethane 0 % — 31.12.2019 ex68042100 20 Discs 0 % p/st 31.12.2019 ex68138900 20 Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components 0 % — 31.12.2018 ex68141000 10 Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres 0 % — 31.12.2018 ex69039090 20 Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials 0 % — 31.12.2018 ex69091900 15 Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm (+ 0,00 mm/– 0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight: 0 % p/st 31.12.2017 ex69091900 20 Silicon nitride (Si3N4) rollers or balls 0 % — 31.12.2020 ex69091900 25 Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide 0 % — 31.12.2018 ex69091900 30 Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end 0 % — 31.12.2018 ex69091900 ex69149000 50 20 Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: 0 % — 31.12.2018 ex69091900 60 Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end 0 % — 31.12.2018 ex69091900 70 Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section 0 % — 31.12.2018 ex69149000 30 Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm 0 % — 31.12.2018 ex70049080 10 Alkali-aluminosilicate drawn flat glass sheet with: 0 % — 31.12.2020 ex70051030 10 Float glass: 0 % — 31.12.2017 ex70060090 25 Glass wafer made of borosilicate float glass 0 % p/st 31.12.2019 ex70071920 10 Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 8528 0 % — 31.12.2018 ex70072900 10 Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides 0 % — 31.12.2018 ex70091000 30 Layered glass with mechanical dimming ability by different angles of incident light comprising: of a kind used for interior rear-view mirrors of vehicles 0 % p/st 31.12.2019 ex70091000 40 Electrochromic self-dimming inside rear-view mirror, consisting of: for use in the manufacture of motor vehicles of Chapter 87 0 % — 31.12.2020 ex70091000 50 Unfinished electro-cromic auto-dimming mirror for motor vehicle rear-view mirrors: 0 % — 31.12.2017 ex70099100 10 Unframed glass mirrors with: 0 % p/st 31.12.2020 70112000 Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes 0 % p/st 31.12.2018 ex70140000 10 Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware 0 % — 31.12.2018 ex70191200 ex70191200 01 21 Rovings, measuring 2600 tex or more but not more than 3300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method) 0 % — 31.12.2018 ex70191200 ex70191200 02 22 Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials 0 % — 31.12.2018 ex70191200 ex70191200 03 23 Rovings, measuring 392 tex or more but not more than 2884 tex, coated with a layer of an acrylic copolymer 0 % — 31.12.2018 ex70191200 ex70191200 05 25 Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm) 0 % — 31.12.2017 ex70191910 10 Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers 0 % — 31.12.2018 ex70191910 15 S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm/+ 1,5 μm) 0 % — 31.12.2017 ex70191910 20 Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % — 31.12.2020 ex70191910 25 Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % — 31.12.2020 ex70191910 30 Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate 0 % — 31.12.2019 ex70191910 50 Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated 0 % — 31.12.2017 ex70191910 55 Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of: coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene 0 % — 31.12.2019 ex70191910 ex70199000 60 30 High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR) 0 % — 31.12.2018 ex70191910 ex70199000 70 20 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) 0 % — 31.12.2018 ex70191910 ex70199000 80 40 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene 0 % — 31.12.2018 ex70193900 50 Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts 0 % — 31.12.2021 ex70194000 ex70194000 11 19 Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of: 0 % — 31.12.2018 ex70199000 10 Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate 0 % — 31.12.2018 ex70200010 ex76169990 10 77 Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body 0 % p/st 31.12.2021 ex72011011 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm 0 % — 31.12.2021 ex72011030 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon 0 % — 31.12.2021 72025000 Ferro-silico-chromium 0 % — 31.12.2018 ex72029980 10 Ferro-dysprosium, containing by weight: 0 % — 31.12.2020 ex73209010 91 Flat spiral spring of tempered steel, with: for use in the manufacture of tensioners for power transmission belts, for internal combustion engines 0 % p/st 31.12.2018 ex73259910 20 Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors 0 % p/st 31.12.2019 ex73262000 20 Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling 0 % — 31.12.2021 ex73269098 40 Iron and steel weights of a kind used for the production of remote controls 0 % — 31.12.2020 ex74091900 ex74102100 10 70 Plates, rolls or sheets: for use in the manufacture of circuit boards 0 % — 31.12.2018 ex74101100 ex85079080 ex85459090 10 60 30 Roll of laminate foil of graphite and copper, with: for use in the manufacture of lithium-ion electric vehicle batteries 0 % — 31.12.2021 ex74102100 10 Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil 0 % — 31.12.2018 ex74102100 30 Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil 0 % — 31.12.2018 ex74102100 40 Sheet or plates: coated on one or both sides with a copper film with a maximum thickness of 0,15 mm 0 % — 31.12.2018 ex74102100 50 Plates: 0 % — 31.12.2018 ex74102100 60 Plates, rolls and sheets of synthetic or artificial resin: for use in the manufacture of circuit boards 0 % — 31.12.2018 ex74199990 ex76169990 91 60 Disc (target) with deposition material, consisting of molybdenum silicide: 0 % — 31.12.2018 76012020 Slabs and billets of unwrought aluminium alloys 4 % — 31.12.2018 ex76012020 10 Slabs and billets of aluminium alloy containing lithium 0 % — 31.12.2017 ex76042100 ex76042990 10 30 Profiles made of aluminium alloy conforming to EN standard AW-6063 T5 0 % p/st 31.12.2018 ex76042910 ex76061299 10 20 Sheets and bars of aluminium-lithium alloys 0 % — 31.12.2020 ex76042910 40 Bars and rods of aluminium alloys containing by weight: consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process 0 % — 31.12.2019 ex76051900 10 Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm 0 % — 31.12.2018 ex76052900 10 Wire of aluminium alloys containing by weight: consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process 0 % m 31.12.2019 ex76071190 40 Aluminium foil in rolls: 0 % — 31.12.2021 ex76071190 60 Plain aluminium foil with the following parameters: of a kind used for high voltage etching 0 % — 31.12.2021 ex76071990 ex85079080 10 80 Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: for use in the manufacture of cathodes for lithium-ion electric vehicle batteries 0 % — 31.12.2021 ex76072090 10 Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries 0 % — 31.12.2017 ex76082089 30 Seamless aluminium alloyed extruded tubes with: 0 % — 31.12.2018 ex76130000 20 Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg 0 % p/st 31.12.2018 ex76169910 ex87089997 30 50 Aluminium engine bracket, with dimensions of: equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: of a kind used in the production of suspensions systems for engines in motor vehicles 0 % p/st 31.12.2019 ex76169990 15 Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts 0 % p/st 31.12.2018 ex76169990 25 Metallised film: 0 % — 31.12.2019 ex76169990 ex84828000 ex88033000 70 10 40 Connecting components for use in the production of helicopter tail rotor shafts 0 % p/st 31.12.2021 ex76169990 75 Parts in the shape of a rectangular frame: of a kind used in the manufacture of TV sets 0 % p/st 31.12.2017 ex81019600 10 Tungsten wire containing by weight 99 % or more of tungsten with: of a kind used in the production of heated car front windows 0 % — 31.12.2020 ex81021000 10 Molybdenum powder with: 0 % — 31.12.2017 ex81039090 10 Tantalum sputtering target with: 0 % p/st 31.12.2019 ex81043000 35 Magnesium powder 0 % — 31.12.2020 ex81049000 10 Ground and polished magnesium sheets, of dimensions not more than 1500 mm × 2000 mm, coated on one side with an epoxy resin insensitive to light 0 % — 31.12.2018 ex81059000 10 Bars or wires made of cobalt alloy containing, by weight: conforming to the material specifications AMS 5842, of a kind used in the aerospace industry 0 % — 31.12.2017 ex81082000 10 Titanium sponge 0 % — 31.12.2018 ex81082000 30 Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm 0 % — 31.12.2018 ex81082000 40 Titanium alloy ingot, containing alloy elements by weight of: 0 % — 31.12.2020 ex81082000 50 Titanium alloy ingot, containing alloy elements by weight of: 0 % — 31.12.2020 ex81082000 60 Titanium alloy ingot, containing alloy elements by weight of: 0 % — 31.12.2020 ex81083000 10 Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium 0 % — 31.12.2018 ex81089030 10 Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040 0 % — 31.12.2019 ex81089030 20 Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 87141000 0 % — 31.12.2017 ex81089030 60 Forged cylindrical bars of titanium with: 0 % — 31.12.2021 ex81089030 70 Wire of an titanium alloy containing by weight: or 0 % — 31.12.2021 ex81089030 80 Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965 or 4967 0 % — 31.12.2020 ex81089050 10 Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 87141000 0 % — 31.12.2018 ex81089050 15 Alloy of titanium, copper, tin, silicon, and niobium containing by weight: in sheets, plates, strips or foil 0 % — 31.12.2019 ex81089050 25 Strip of titanium alloy 0 % — 31.12.2021 ex81089050 30 Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of: 0 % — 31.12.2017 ex81089050 50 Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium 0 % — 31.12.2017 ex81089050 60 Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight: 0 % — 31.12.2018 ex81089050 75 Plates, sheets, strips and foil of titanium alloy, containing by weight: 0 % — 31.12.2021 ex81089050 80 Plates, sheets, strips and foil of non-alloyed titanium 0 % — 31.12.2019 ex81089050 85 Strip or foil of non-alloyed titanium: of a kind used in the manufacture of welded tubes for nuclear power plant condensers 0 % — 31.12.2019 ex81089090 ex90039000 30 20 Parts of spectacle frames and mountings, including of a titanium alloy 0 % p/st 31.12.2021 ex81092000 10 Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry 0 % — 31.12.2018 ex81101000 10 Antimony in the form of ingots 0 % — 31.12.2018 ex81129930 10 Alloy of niobium (columbium) and titanium, in the form of bars and rods 0 % — 31.12.2018 ex81130090 10 Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits 0 % — 31.12.2017 ex81130090 20 Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules 0 % — 31.12.2020 ex82071910 10 Inserts for drilling tools with working parts of agglomerated diamonds 0 % p/st 31.12.2019 ex82073010 10 Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles 0 % p/st 31.12.2017 ex83016000 ex84139100 ex84199085 ex84389000 ex84689000 ex84769010 ex84769090 ex84799070 ex84819000 ex85030099 ex85159080 ex85369040 ex85369095 ex85371098 ex87089199 ex87089997 20 40 30 20 20 20 20 83 30 70 30 95 95 70 20 40 Keypads of silicone or plastic, 0 % p/st 31.12.2020 ex83022000 20 Castors, with 0 % p/st 31.12.2020 ex83099090 10 Aluminium can ends: 0 % p/st 31.12.2018 ex84013000 20 Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors 0 % — 31.12.2018 ex84014000 10 Stainless steel absorber control rods, filled with neutron absorbing chemical elements 0 % p/st 31.12.2019 ex84059000 ex87082110 ex87082190 10 10 10 Metal casing for automobile safety belt pre-tension gas generators 0 % p/st 31.12.2019 ex84073320 ex84073380 ex84079080 ex84079090 10 10 10 10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: 0 % — 31.12.2017 ex84079010 10 Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 8508 0 % — 31.12.2021 ex84079090 20 Compact Liquid Petroleum Gas (LPG) Engine System, with: for use in the manufacture of vehicles of heading 8427 0 % — 31.12.2020 ex84089041 20 Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems 0 % — 31.12.2018 ex84089043 20 Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems 0 % — 31.12.2018 ex84089043 ex84089045 ex84089047 40 30 50 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: for use in the manufacture of vehicles of heading 8427 0 % — 31.12.2017 ex84099100 20 Fuel injector with solenoid valve for optimized atomization in the engine combustion chamber for spark-ignition internal combustion piston engines for use in the manufacture of motor vehicles of Chapter 87 0 % — 31.12.2021 ex84099100 ex84099900 ex84119900 65 30 70 Spiral-shaped gas turbine turbocharger component: 0 % p/st 31.12.2018 ex84099900 ex84799070 10 85 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber 0 % p/st 31.12.2021 ex84119900 60 Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: 0 % p/st 31.12.2017 ex84119900 80 Actuator for a single-stage turbocharger: 0 % p/st 31.12.2018 ex84137035 20 Single phase centrifugal pump: 0 % — 31.12.2020 ex84139100 30 Fuel pump cover: of a kind used in motor vehicles with petrol engines 0 % p/st 31.12.2019 ex84143081 50 Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment 0 % — 31.12.2019 ex84143081 ex84148073 60 30 Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants: of a kind used in the production of household heat pump laundry tumble dryers 0 % — 31.12.2018 ex84143089 20 Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW 0 % — 31.12.2018 ex84145925 30 Axial fan: for use in the manufacture of computers 0 % — 31.12.2018 ex84145925 40 Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 8528 0 % — 31.12.2020 ex84149000 20 Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles 0 % p/st 31.12.2019 ex84149000 30 Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles 0 % p/st 31.12.2018 ex84149000 40 Drive part, for compressors of air conditioning machines of motor vehicles 0 % p/st 31.12.2018 ex84159000 20 Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles 0 % p/st 31.12.2021 ex84159000 30 Aluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with: of a kind used in car air-conditioning systems 0 % p/st 31.12.2020 ex84159000 40 Flame-soldered aluminium block with extruded, bent connector lines, of a kind used in car air-conditioning systems 0 % p/st 31.12.2020 ex84159000 50 Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with: of a kind used in car air-conditioning systems 0 % p/st 31.12.2020 ex84189910 50 Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment 0 % p/st 31.12.2019 ex84189910 60 Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment 0 % p/st 31.12.2019 ex84212100 20 Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements: for use in a biopharmaceutical laboratory 0 % p/st 31.12.2019 ex84219990 91 Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder 0 % p/st 31.12.2018 ex84219990 93 Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not more than 3700 mm and a diameter of not more than 500 mm 0 % p/st 31.12.2018 ex84223000 ex84798997 10 30 Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges 0 % p/st 31.12.2018 ex84248970 20 Mechanical passenger car headlights washer with telescopic hose, high pressure nozzles and mounting clamps for use in the manufacture of goods of Chapter 87 0 % — 31.12.2021 ex84249080 30 Containers of poly(ethylene terephthalate), with a content of 50 ml or more but not more than 600 ml, equipped with a nozzle, of a kind used as a part of mechanical appliances for spraying liquids 0 % p/st 31.12.2018 ex84312000 30 Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427 0 % p/st 31.12.2017 ex84312000 40 Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427 0 % p/st 31.12.2018 ex84369900 10 Part containing: and whether or not containing: for use in the manufacture of garden shredders 0 % p/st 31.12.2020 ex84399900 10 Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more 0 % p/st 31.12.2018 ex84679900 ex85365011 10 35 Mechanical switches for connecting electrical circuits, with: for use in the manufacture of machines falling within heading 8467 0 % p/st 31.12.2019 ex84752900 ex85141080 10 10 Glass Filament Melter with heater basket/bushing assembly: 0 % p/st 31.12.2018 ex84778099 10 Machines for casting or for surface modification of plastic membranes of heading 3921 0 % p/st 31.12.2018 ex84798997 ex84799020 ex84799070 50 80 80 Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line 0 % p/st 31.12.2020 ex84798997 60 Bioreactor for biopharmaceutical cell culture 0 % p/st 31.12.2021 ex84798997 70 Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy 0 % p/st 31.12.2019 ex84798997 80 Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries 0 % p/st 31.12.2019 ex84798997 85 High Pressure Hard Materials Compression Press (Link Press): 0 % p/st 31.12.2020 ex84813091 91 Steel check (non-return) valves with: 0 % p/st 31.12.2019 ex84818059 10 Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines 0 % p/st 31.12.2018 ex84818069 60 Four-way reversing valve for refrigerants, consisting of: with a working pressure up to 4,5 MPa 0 % p/st 31.12.2017 ex84818079 20 Solenoid valve device that can withstand a pressure of 875 bar 0 % p/st 31.12.2018 ex84821010 ex84821090 ex84825000 10 10 10 Ball and cylindrical bearings: for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants 0 % p/st 31.12.2019 ex84821010 ex84821090 30 20 Ball bearings: for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears 0 % p/st 31.12.2019 ex84833038 40 Cylindrical bearing housing: 0 % p/st 31.12.2017 ex84834029 50 Gear set of cycloid gear type with: of a kind used in robot arms 0 % p/st 31.12.2021 ex84834029 60 Epicyclic gearing, of a kind used in driving hand-held power tools with: 0 % p/st 31.12.2018 ex84834051 20 Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 0 % p/st 31.12.2018 ex84834059 20 Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 0 % p/st 31.12.2018 ex84834090 80 Transmission gearbox, with: for use in the manufacture of goods of heading 8427 0 % p/st 31.12.2020 ex85011010 20 Synchronous motor for a dishwasher with a water flow control mechanism with 0 % — 31.12.2020 ex85011099 54 DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated speed of 2260 (± 15 %) rpm or 5420 (± 15 %) rpm, a supply voltage of 1,5 V or 3 V 0 % — 31.12.2018 ex85011099 55 Electric turbocharger actuator, with: 0 % — 31.12.2020 ex85011099 57 DC motor: 0 % — 31.12.2020 ex85011099 60 DC motor: for use in the manufacture of electric fryers 0 % — 31.12.2017 ex85011099 70 DC stepping motor, with 0 % — 31.12.2018 ex85011099 75 Permanently excited DC motor with 0 % — 31.12.2020 ex85011099 79 DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least – 20 °C to + 70 °C 0 % — 31.12.2018 ex85011099 80 DC stepping motor, with: 0 % — 31.12.2018 ex85011099 81 DC stepping motor, with an angle of step of 18 o or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 mm × 68 mm, a two phase winding and an output of not more than 5 W 0 % — 31.12.2018 ex85011099 82 DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1500 (± 15 %) rpm or 6800 (± 15 %) rpm, a supply voltage of 2 V or 8 V 0 % — 31.12.2019 ex85013100 25 DC motors, brushless, with: of the kind used in power steering systems for cars 0 % — 31.12.2017 ex85013100 30 DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) 0 % — 31.12.2021 ex85013100 33 Brushless DC motor assembly comprised of a motor and transmission, with: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 ex85013100 ex85013200 35 70 Automotive-ready, brushless and permanently excited direct current motor with: 0 % — 31.12.2020 ex85013100 40 Permanently excited DC motor with 0 % — 31.12.2019 ex85013100 45 DC motors, brushless, with: 0 % — 31.12.2018 ex85013100 55 DC motor with commutator, with for driving hand-held power tools 0 % — 31.12.2018 ex85013200 ex85013300 50 55 Fuel cell module containing at least polymer electrolyte membrane fuel cells whether or not in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems 0 % — 31.12.2018 ex85013200 ex85013300 60 15 Traction motor, with: for use in the manufacture of electric vehicles 0 % — 31.12.2019 ex85013300 ex85014080 ex85015350 30 50 10 Electric drive for motor vehicles, with an output of not more than 315 kW, with: 0 % — 31.12.2021 ex85015100 ex85015220 30 50 AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with: 0 % — 31.12.2021 ex85016120 35 Fuel cell module, AC generator with an output of 7.5 kVA or less, consisting of: for use as a part in a heating appliance 0 % — 31.12.2020 ex85016200 30 Fuel cell system 0 % — 31.12.2017 ex85030091 ex85030099 31 32 Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring 0 % p/st 31.12.2018 ex85030099 31 Stamped collector of an electric motor, having an external diameter of not more than 16 mm 0 % p/st 31.12.2018 ex85030099 33 Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm 0 % p/st 31.12.2021 ex85030099 34 Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm 0 % p/st 31.12.2019 ex85030099 35 Transmitter resolver for brushless motors of electrical power steering 0 % p/st 31.12.2019 ex85030099 40 Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501 0 % p/st 31.12.2017 ex85030099 50 Stator for brushless motor, with: of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums 0 % p/st 31.12.2018 ex85030099 60 Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm) 0 % p/st 31.12.2019 ex85043180 20 Transformer for use in the manufacture of inverters in LCD modules 0 % — 31.12.2017 ex85043180 30 Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters 0 % — 31.12.2018 ex85043180 40 Electrical transformers: for internal use in the manufacture of set top boxes and TVs 0 % — 31.12.2017 ex85043180 50 Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry 0 % — 31.12.2021 ex85044082 40 Printed circuit board equipped with a bridge rectifier circuit and other active and passive components: 0 % p/st 31.12.2017 ex85044088 30 DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles 0 % p/st 31.12.2019 ex85044090 15 Semiconductor power module (so called Smart Power Module) for converting single-phase AC input voltage into 2 or 3-phase AV voltage used to power up polyphase AC variable-speed electrical drives, in a casing fitted with one or more integrated circuits, IGBTs, diodes and thermistors, having an output voltage of 600 VAC or 650 VAC, and a rated current of 4 A or more, but not more than 30 A 0 % — 31.12.2021 ex85044090 20 Direct current to direct current converter 0 % p/st 31.12.2021 ex85044090 30 Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 85165000 0 % p/st 31.12.2018 ex85044090 40 Semiconductor power modules comprising: 0 % p/st 31.12.2018 ex85044090 50 Drive unit for industrial robot with: 0 % p/st 31.12.2018 ex85044090 60 Transfer moulded semiconductor power module comprising: 0 % p/st 31.12.2018 ex85044090 70 Module for converting alternating current into direct current and direct current into direct current with 0 % p/st 31.12.2018 ex85044090 80 Power converter containing: for use in the manufacture of electric vehicles 0 % p/st 31.12.2019 ex85045095 20 Inductors with one or more windings, having an inductance of not more than 62 mH per winding/coil 0 % p/st 31.12.2018 ex85045095 40 Coil choke with: for use in the manufacture of LCD and LED module power boards 0 % p/st 31.12.2020 ex85045095 50 Solenoid coil with 0 % p/st 31.12.2017 ex85045095 60 Inductors with one or more windings, with an inductance per winding of not more than 350 mH, for use in the manufacture of electronic control gear, control units and LED light sources for the lighting industry 0 % — 31.12.2021 ex85049011 10 Ferrite cores, other than for deflection yokes 0 % p/st 31.12.2018 ex85049011 20 Reactor cores for use in a High Voltage Direct Current thyristor converter 0 % p/st 31.12.2019 ex85049099 20 Thyristor SGCT (Symmetric Gate-Commutated Thyristor) with integrated gate driver: of a kind used in medium voltagestatic converters (rectifiers and inverters) 0 % p/st 31.12.2019 ex85051100 31 Permanent magnet having a remanence of 455 mT (± 15 mT) 0 % p/st 31.12.2018 ex85051100 33 Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with or in the shape of a disc with a diameter of not more than 90mm, whether or not containing a hole in the centre 0 % p/st 31.12.2018 ex85051100 35 Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications 0 % p/st 31.12.2017 ex85051100 45 A quarter sleeve, intended to become permanent magnet after magnetisation, of a kind used on rotors for the manufacture of fuel pumps 0 % p/st 31.12.2019 ex85051100 47 Articles in the form of a triangle, square or rectangle, whether or not shaped or with rounded corners intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions: 0 % — 31.12.2021 ex85051100 50 Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions: of a kind to be used in the manufacture of electric servomotors for industrial automation 0 % p/st 31.12.2017 ex85051100 ex85051990 55 40 Flat bars of an alloy of samarium and cobalt with intended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars 0 % p/st 31.12.2020 ex85051100 60 Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with of a kind used in the manufacture of permanent magnets after magnetisation 0 % — 31.12.2017 ex85051100 70 Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet of a kind used in car loudspeakers 0 % — 31.12.2018 ex85051990 30 Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between245 mT and 470 mT 0 % — 31.12.2018 ex85052000 30 Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles 0 % p/st 31.12.2018 ex85059029 30 Coil for an electromagnetic valve, with: in a cylindrical metal housing 0 % p/st 31.12.2019 ex85059029 91 Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 8517 0 % p/st 31.12.2018 ex85065010 10 Lithium cylindrical primary cells with: for use in the manufacture of telemetry and medical devices, electronic meters or remote controls 0 % — 31.12.2021 ex85065090 10 Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V 0 % — 31.12.2018 ex85065090 20 Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit 0 % — 31.12.2018 ex85065090 30 Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah 0 % — 31.12.2018 ex85071020 30 Lead-acid accumulators or modules, with for use in the manufacture of articles of heading 8711 0 % — 31.12.2018 ex85071020 80 Lead acid starter battery, with: for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls 0 % — 31.12.2020 ex85073020 30 Cylindrical nickel-cadmium accumulator or module, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1mm), having a nominal capacity of 1000 mAh or more, for use in the manufacture of rechargeable batteries 0 % — 31.12.2018 ex85075000 ex85076000 20 20 Rectangular accumulator or module, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries 0 % — 31.12.2018 ex85075000 30 Cylindrical nickel-hydride accumulator or module, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries 0 % — 31.12.2018 ex85076000 15 Cylindrical lithium-ion-accumulators or modules with: for use in the manufacture of electric bicycles 0 % — 31.12.2020 ex85076000 17 Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with: 0 % — 31.12.2020 ex85076000 23 Lithium-ion-accumulator or module with: for use in the manufacture of rechargeable hybrid electric vehicle batteries 0 % — 31.12.2020 ex85076000 25 Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: 0 % — 31.12.2017 ex85076000 27 Lithium-ion cylindrical accumulator with: for use in the manufacture of electric bicycle drives 0 % — 31.12.2020 ex85076000 30 Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries 0 % — 31.12.2019 ex85076000 33 Lithium-ion accumulator, with: 0 % — 31.12.2020 ex85076000 37 Lithium-ion accumulator, with: 0 % — 31.12.2020 ex85076000 43 Lithium-ion accumulators, with for use in the manufacture of products falling within subheading 84713000 0 % — 31.12.2020 ex85076000 ex85078000 45 20 Rechargeable lithium-ion polymer battery with: for use in the manufacture of cash registers 0 % — 31.12.2019 ex85076000 47 Lithium-ion accumulators, with for use in the manufacture of products falling within subheading 85171200 0 % — 31.12.2020 ex85076000 50 Modules for the assembly of batteries of ion lithium electric accumulators with: 0 % — 31.12.2017 ex85076000 53 Batteries of lithium-ion electric accumulators or rechargeable module: 0 % — 31.12.2017 ex85076000 55 Lithium-ion accumulator or module in cylindrical form, with: for the manufacture of rechargeable batteries 0 % — 31.12.2017 ex85076000 57 Lithium-ion accumulator or module, cuboid in shape, with: for the manufacture of rechargeable batteries 0 % — 31.12.2017 ex85076000 60 Lithium-ion rechargeable batteries, with: put up in packs of 48 modules 0 % — 31.12.2020 ex85076000 65 Cylindrical lithium ion cell with 0 % — 31.12.2021 ex85076000 71 Lithium-ion rechargeable batteries, with: 0 % — 31.12.2021 ex85076000 75 Rectangular lithium-ion-accumulator, with 0 % — 31.12.2021 ex85076000 80 Rectangular lithium-ion-accumulator or module, with for use in the manufacture of rechargeable batteries for motor vehicles 0 % — 31.12.2020 ex85076000 85 Rectangular modules for incorporation in lithium-ion rechargeable batteries: 0 % — 31.12.2020 ex85079080 70 Cut plate of nickel-plated copper foil, with: for use in the manufacture of lithium-ion electric vehicle batteries 0 % p/st 31.12.2021 ex85087000 ex85371098 10 96 Printed circuit board without a housing for actuating and controlling vacuum cleaner brushes powered by a motor with an output of not more than 300 W 0 % p/st 31.12.2020 ex85087000 ex85371098 20 98 Electronic circuit cards that: 0 % p/st 31.12.2020 ex85113000 30 Igniter integrated coil assembly with: 0 % p/st 31.12.2019 ex85113000 50 Ignition coil: for use in the manufacture of motor vehicles of Chapter 87 0 % — 31.12.2021 ex85118000 20 Glow-plug for pre-heating of the diesel engines with: for use in the manufacture of diesel engines of motor vehicles 0 % — 31.12.2021 ex85122000 20 Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12 V or more, but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87 0 % p/st 31.12.2019 ex85122000 30 Lighting module, containing at least: in an aluminium housing with a radiator, mounted at a bracket with an actuator 0 % p/st 31.12.2020 ex85122000 40 Fog lamp with a galvanised inner surface, containing: for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex85123090 10 Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising: of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex85123090 20 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: of a kind used in the manufacture of goods of chapter 87 0 % p/st 31.12.2020 ex85124000 ex85168020 10 20 Car door mirror heating foil: 0 — 31.12.2018 ex85142080 ex85165000 ex85166080 10 10 10 Cavity assembly comprising at least: for use in the manufacture of built-in products of headings 8514 2080, 8516 5000 and 8516 6080 0 % p/st 31.12.2019 ex85169000 60 Ventilation sub-assembly of an electric deep-fat fryer: 0 % p/st 31.12.2019 ex85169000 70 Inner pot: for use in the manufacture of an electric fryer 0 % p/st 31.12.2017 ex85169000 80 Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514 2080, 8516 5000 and 8516 6080 0 % p/st 31.12.2019 ex85182995 30 Loudspeakers of: of a kind used for TV sets and video monitors manufacture as well as home entertainment systems 0 % — 31.12.2017 ex85182995 40 Loudspeaker used in the manufacture of goods of Chapter 87 0 % — 31.12.2021 ex85183095 20 Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm 0 % p/st 31.12.2018 ex85184080 91 Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality 0 % — 31.12.2019 ex85184080 92 Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits 0 % — 31.12.2020 ex85189000 30 Magnet system consisting of: of a kind used in car loudspeakers 0 % p/st 31.12.2019 ex85189000 35 Metal plate for use in the manufacture of loudspeaker passive radiators 0 % — 31.12.2021 ex85189000 40 Loudspeaker cone, made from paper pulp or polypropylene, with accompanying dustcaps, of a kind used in car loudspeakers 0 % p/st 31.12.2019 ex85189000 50 Diaphragm for an electrodynamic speaker with 0 % p/st 31.12.2019 ex85189000 60 Upper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in the shape of a disk, whether or not containing a hole in the centre, of a kind used in car loudspeakers 0 % — 31.12.2020 ex85189000 80 Integrated car loudspeaker housing, consisting of: 0 % p/st 31.12.2019 ex85189000 91 Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers 0 % p/st 31.12.2018 ex85219000 20 Digital video recorder: for use in the manufacture of closed-circuit television (CCTV) surveillance systems 0 % — 31.12.2019 ex85229049 50 Electronic assembly for a laser read-head of a compact disc player, comprising: the whole mounted on a support 0 % p/st 31.12.2018 ex85229049 ex85279900 ex85299065 60 10 25 Printed circuit board assembly comprising: for use in the manufacture of home entertainment systems 0 % p/st 31.12.2019 ex85229049 ex85279900 ex85299065 65 20 40 Printed circuit board subassembly, comprising: for use in the manufacture of home entertainment systems 0 % p/st 31.12.2019 ex85229049 70 Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit 0 % p/st 31.12.2018 ex85229080 15 Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521 0 % p/st 31.12.2017 ex85229080 30 Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players 0 % p/st 31.12.2021 ex85229080 65 Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording 0 % p/st 31.12.2018 ex85229080 70 Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 8521 0 % p/st 31.12.2018 ex85229080 75 Optical reading head for CD player, consisting of one laser diode, one photo detector integrated circuit and one beam splitter 0 % p/st 31.12.2018 ex85229080 80 Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8521, 8526, 8527, 8528 or 8543 0 % p/st 31.12.2018 ex85229080 83 Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: for the manufacture of products falling within heading 8521 0 % p/st 31.12.2018 ex85229080 84 Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: 0 % p/st 31.12.2018 ex85229080 85 Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 8521 0 % p/st 31.12.2018 ex85229080 96 Hard disk drive, for incorporation in products of heading 8521 0 % p/st 31.12.2017 ex85229080 97 Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8521 0 % p/st 31.12.2021 ex85258019 20 Assembly for television cameras of dimensions of not more than 10 mm × 15 mm × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution of not more than 1024 × 1280 pixels, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 85171200 0 % — 31.12.2018 ex85258019 ex85258091 31 10 Camera: for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks 0 % — 31.12.2018 ex85258019 45 Camera module with a resolution of 1280 720 P HD, with two microphones, for use in the manufacture of products of heading 8528 0 % — 31.12.2017 ex85258019 50 Remote camera head, whether or not contained in a housing for use in the manufacture of miniaturised industrial camera systems 0 % — 31.12.2018 ex85258019 55 Camera module with a resolution of 1920 × 1080 P HD with two microphones for use in the manufacture of products falling within heading 8528 0 % — 31.12.2018 ex85258019 60 Image scanning cameras, using: 0 % — 31.12.2019 ex85258019 65 Cameras using MIPI electrical interface with: for use in the manufacture of products falling within subheading 85171200 or 84713000 0 % — 31.12.2020 ex85258019 70 Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with: 0 % — 31.12.2019 ex85261000 20 Radar sensor with control unit for autonomous emergency car braking system for use in manufacture of goods of Chapter 87 0 % — 31.12.2021 ex85279199 ex85299065 20 85 Assembly consisting of at least: for use in the manufacture of consumer electronic products 0 % — 31.12.2019 ex85284900 10 Video monitor comprising: the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus 0 % — 31.12.2018 ex85285900 10 Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less, used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94 0 % — 31.12.2018 ex85285900 20 Liquid crystal display colour video monitor assembly mounted on a frame, used for permanent incorporation or permanent mounting into entertainment systems for vehicles 0 % — 31.12.2019 ex85291080 20 Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing 0 % p/st 31.12.2018 ex85291080 50 Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing 0 % p/st 31.12.2018 ex85291080 60 Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing 0 % p/st 31.12.2018 ex85291080 70 Ceramic filters of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment 0 % p/st 31.12.2019 ex85299065 15 Electronic assembly comprising at least 0 % p/st 31.12.2020 ex85299065 ex85489090 30 44 Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing 0 % p/st 31.12.2018 ex85299065 45 Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 8527 0 % p/st 31.12.2019 ex85299065 50 Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528 0 % p/st 31.12.2021 ex85299065 65 Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module 0 % p/st 31.12.2020 ex85299065 75 Modules comprising at least semiconductor chips for: 0 % p/st 31.12.2017 ex85299065 80 Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading 8527 0 % — 31.12.2019 ex85299092 ex85489090 15 60 LCD modules, 0 % p/st 31.12.2018 ex85299092 25 LCD modules, not combined with touch screen facilities, solely consisting of: for use in the manufacture of radios for motor vehicles 0 % p/st 31.12.2020 ex85299092 32 Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 8528 0 % p/st 31.12.2018 ex85299092 35 LCD modules with: for permanent incorporation or permanent mounting into motor vehicles of chapter 87 0 % — 31.12.2020 ex85299092 36 LCD module with: for installation in motor vehicles of chapter 87 0 % — 31.12.2020 ex85299092 37 Fastening and covering ledges of aluminium alloy containing: specifically shaped for use in the manufacture of TV sets 0 % — 31.12.2020 ex85299092 40 Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors 0 % p/st 31.12.2018 ex85299092 41 Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors 0 % p/st 31.12.2018 ex85299092 42 Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528 0 % p/st 31.12.2018 ex85299092 43 Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply 0 % p/st 31.12.2018 ex85299092 45 Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats 0 % p/st 31.12.2018 ex85299092 47 Area image sensors (progressive scan Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel 0 % p/st 31.12.2019 ex85299092 ex85366990 49 83 AC socket with a noise filter, composed of: whether or not equipped with a metal support, which joins the AC socket to the PDP TV set 0 % p/st 31.12.2019 ex85299092 50 Colour LCD display panel for LCD monitors of heading 8528: for use in the manufacture of vehicles of chapter 87 0 % p/st 31.12.2020 ex85299092 55 OLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities and one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors 0 % p/st 31.12.2019 ex85299092 65 OLED display consisting of: for use in the manufacture of goods of headings 8528 0 % p/st 31.12.2019 ex85299092 70 Rectangular fastening and covering frame: of a kind used for the production of TV sets 0 % p/st 31.12.2017 ex85299092 85 Colour LCD module in a housing: for permanent installation in vehicles of Chapter 87 0 % p/st 31.12.2020 ex85359000 20 Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back-light units for LCD modules 0 % p/st 31.12.2018 ex85359000 ex85365080 30 83 Semiconductor module switch in a casing: 0 % p/st 31.12.2020 ex85363030 11 Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing 0 % p/st 31.12.2018 ex85364110 20 Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less 0 % — 31.12.2021 ex85364190 40 A power relay with: 0 % p/st 31.12.2018 ex85364190 50 Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with one or two photovoltaic generators and two power MOSFET output switches in a casing with connections for a maximum voltage of 60 volts and a minimum current of 2 amps 0 % — 31.12.2021 ex85364900 30 Relays with: for use in the manufacture of batteries for electric vehicles 0 % — 31.12.2020 ex85364900 40 Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts 0 % — 31.12.2021 ex85364900 91 Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length excluding wires, with a maximum leakage rate of 10-6 cm3 He/sec at one bar in the temperature range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment 0 % p/st 31.12.2018 ex85365011 31 Switch of the printed circuit mount type, operating at a force of 4,9 N (± 0,9 N), contained in a housing 0 % p/st 31.12.2018 ex85365011 32 Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60 V and at a current strength of not more than 50mA, for use in the manufacture of products of headings 8521 or 8528 0 % p/st 31.12.2018 ex85365011 40 Push-button switch for keyless start for a voltage of 12 V in a plastic housing, comprising at least: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2021 ex85365019 91 Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections 0 % p/st 31.12.2018 ex85365019 ex85365080 93 97 Devices, having adjustable controller and switching functions, comprising one or more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing 0 % p/st 31.12.2018 ex85365080 81 Mechanical speed governer switches for connecting electrical circuits, with: for use in the manufacture of machines falling within heading 8467 0 % p/st 31.12.2019 ex85365080 82 Mechanical switches for connecting electrical circuits, with: for use in the manufacture of machines falling within heading 8467 0 % p/st 31.12.2019 ex85365080 93 Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V 0 % p/st 31.12.2018 ex85365080 98 Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not more than 250 V and at a current strength of not more than 5 A, for use in the manufacture of products of headings 8521 or 8528 0 % p/st 31.12.2018 ex85366990 51 SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528 0 % p/st 31.12.2017 ex85366990 60 Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors 0 % p/st 31.12.2020 ex85366990 81 Pitch connector for use in the manufacture of LCD television reception apparatus 0 % p/st 31.12.2017 ex85366990 82 Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least: for use in the manufacture of products falling within headings 8521 or 8528 0 % p/st 31.12.2019 ex85366990 84 Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 0 % p/st 31.12.2020 ex85366990 85 Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 8528 0 % p/st 31.12.2021 ex85366990 86 High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528 0 % p/st 31.12.2021 ex85366990 88 Secure Digital (SD), CompactFlash, Smart Card and Common interface modules (cards) female connectors and interfaces, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1000 V 0 % p/st 31.12.2017 ex85367000 10 Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528 0 % p/st 31.12.2021 ex85369040 ex85369095 20 20 Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1000 V 0 % p/st 31.12.2020 ex85369040 ex85369095 92 92 Metallic stamped frame with connections 0 % p/st 31.12.2018 ex85369040 ex85369095 ex85444993 94 94 10 Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements 0 % p/st 31.12.2018 ex85369095 30 Rivet contacts 0 % p/st 31.12.2020 ex85371091 30 Data processing and evaluation vehicle dashboard control module, operating through the CAN — bus protocol, containing at least: with a voltage of 13,5 V 0 % p/st 31.12.2017 ex85371091 50 Fuse control module in a plastic housing with mounting brackets comprising: of a kind used in the manufacture of goods of chapter 87 0 % p/st 31.12.2020 ex85371091 ex85371098 60 45 Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least: of a kind used for manufacturing recycling or sorting machines 0 % p/st 31.12.2018 85371095 ex85371098 92 Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors 0 % p/st 31.12.2018 ex85371098 30 Motor bridge ICs without programmable memory consisting of: 0 % p/st 31.12.2018 ex85371098 35 Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing: 0 % p/st 31.12.2020 ex85371098 40 Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of: of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex85371098 50 Electronic control unit BCM (Body Control Module) comprising of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex85371098 60 Electronic assembly consisting of: for use in the manufacture of built-in products of headings 85142080, 85165000 and 85166080 0 % p/st 31.12.2019 ex85371098 93 Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems 0 % p/st 31.12.2018 ex85371098 ex85437090 94 20 Unit consisting of two junction field effect transistors contained in a dual lead frame housing 0 % p/st 31.12.2018 ex85389091 ex85389099 20 50 Interior antenna for a car door locking system, comprising: of a kind used in the manufacture of goods of CN heading 8703 0 % p/st 31.12.2020 ex85389099 ex85472000 30 10 Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint 0 % p/st 31.12.2019 ex85389099 92 Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 mm × 48 mm 0 % p/st 31.12.2018 ex85389099 95 Copper base plate, of a kind used as a heatsink in the manufacture of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650 V or more but not more than 1200 V 0 % p/st 31.12.2018 ex85402080 91 Photomultiplier 0 % — 31.12.2021 ex85407100 20 Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 85165000 0 % — 31.12.2018 ex85408900 91 Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons 0 % — 31.12.2018 ex85408900 92 Vacuum fluorescent display tube 0 % — 31.12.2018 ex85437090 30 Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % p/st 31.12.2018 ex85437090 33 High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing 0 % — 31.12.2021 ex85437090 34 Gallium nitride (GaN) high-frequency amplifier consisting of one or more discrete transistors, one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing 0 % — 31.12.2021 ex85437090 35 Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % p/st 31.12.2018 ex85437090 45 Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing 0 % p/st 31.12.2018 ex85437090 55 Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing 0 % p/st 31.12.2018 ex85437090 60 Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing 0 % p/st 31.12.2018 ex85437090 65 Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing 0 % p/st 31.12.2018 ex85437090 80 Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing 0 % p/st 31.12.2018 ex85437090 85 Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % p/st 31.12.2018 ex85437090 95 Mobile telephone view and control module comprising of: for use in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2020 ex85442000 ex85444290 ex85444993 10 20 20 PET/PVC insulated flexible cable with: 0 % — 31.12.2018 ex85442000 20 Antenna connecting cable for the transmission of analogue radio (AM/FM) and GPS signals, containing: of kind used in the manufacture of goods of Chapter 87 0 % — 31.12.2021 ex85443000 30 Multi-measurement wire harness of a voltage of 5V or more but not more than 90 V capable of measuring some or all of the following; for use in the manufacture of vehicles of heading 8427 0 % p/st 31.12.2018 ex85443000 35 Wire harness: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 ex85443000 ex85444290 40 40 Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box 0 % p/st 31.12.2019 ex85443000 ex85444290 60 50 Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 87 0 % — 31.12.2020 ex85443000 70 Multi-measurement wire harness: for use in the manufacture of vehicles of heading 8711 0 % p/st 31.12.2019 ex85443000 ex85444290 80 60 Extension two-core cable with two connectors, containing at least: of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2020 ex85444290 10 Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with: used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits 0 % p/st 31.12.2018 ex85444290 30 PET insulated electric conductor with: for use in the manufacture of products falling within headings 8521 and 8528 0 % — 31.12.2017 ex85444290 70 Electric conductors: for use in the manufacture of hearing aids, accessory kits and speech processors 0 % p/st 31.12.2020 ex85444991 10 Insulated copper electrical wires: for use in the manufacture of automotive cable harnesses 0 % m 31.12.2019 ex85444993 30 Electric conductors: for use in the manufacture of hearing aids, implants and speech processors 0 % m 31.12.2020 ex85451900 20 Carbon electrodes, for use in the manufacture of zinc-carbon batteries 0 % p/st 31.12.2018 ex85459090 20 Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes 0 % — 31.12.2020 ex85471000 10 Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters 0 % p/st 31.12.2018 ex85481029 10 Spent lithium-ion or nickel metal hydride electric accumulators 0 % — 31.12.2017 ex85489090 41 Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing 0 % p/st 31.12.2018 ex85489090 43 Contact image sensor 0 % p/st 31.12.2018 ex85489090 48 Optical unit, containing at least 0 % p/st 31.12.2021 ex85489090 50 Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528 0 % p/st 31.12.2017 ex85489090 65 LCD modules, 0 % p/st 31.12.2018 ex87042391 20 Motor chassis with a self-ignition capacity of at least 8000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm 0 % — 31.12.2017 ex87083010 20 Motor powered brake actuation unit for use in the manufacture of electric motor vehicles 0 % p/st 31.12.2019 ex87083010 ex87083091 30 50 Brake unit assembly, whether or not equipped with an electronic parking brake, comprising at least: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2021 ex87083091 10 Drum type parking brake: for use in the manufacture of motor vehicles 0 % p/st 31.12.2021 ex87083091 20 Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex87083091 30 Body of disc type brake in BIR (Ball in Ramp) or EPB (Electronic Parking Brake) version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex87083091 40 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2020 ex87084020 ex87084050 10 20 Gear box assembly with one or two inputs and three outputs in cast aluminum housing with overall dimensions of not more than 445 mm (width) × 462 mm (height), 680 mm length, equipped with: for use in the manufacture of all-terrain vehicles or utility task vehicles 0 % — 31.12.2021 ex87084020 ex87084050 20 10 Automatic hydrodynamic gearbox with a hydraulic torque converter without transfer box, cardan shaft and front differential for use in the manufacture of motor vehicles of Chapter 87 0 % p/st 31.12.2020 ex87085055 10 Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703 0 % p/st 31.12.2020 ex87085099 10 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle 0 % p/st 31.12.2020 ex87085099 ex87089910 ex87089997 20 20 70 Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least: for use in the manufacture of all-terrain vehicles or utility task vehicles 0 % — 31.12.2021 ex87088035 10 Upper strut insulator containing of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2020 ex87088091 10 Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2020 ex87088091 20 Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2020 ex87089135 10 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex87089199 30 Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: of a kind used in heat exchangers for car cooling systems 0 % p/st 31.12.2020 ex87089310 ex87089390 10 10 Mechanically operated clutch for use with an elastomeric belt in a dry environment in a CVT (Continuously Variable Transmission) gear case: for use in the manufacture of all-terrain vehicles or utility task vehicles 0 % — 31.12.2021 ex87089310 ex87089390 20 20 Mechanically operated centrifugal clutch for use with an elastomeric belt in a dry environment in a continuously variable transmission (CVT), equipped with: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 ex87089435 20 Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex87089510 ex87089599 10 20 Inflatable safety cushion of high strength polyamide fibre 0 % p/st 31.12.2020 ex87089510 ex87089599 20 30 Inflatable safety cushion of high strength polyamide fibre: 0 % p/st 31.12.2020 ex87089599 10 Front passenger airbag composed of: of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2020 ex87089910 ex87089997 10 60 Six-layer composite fuel tank assembly comprising of: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 ex87141090 10 Inner tubes, of a kind used for the production of motorcycle fork rods 0 % p/st 31.12.2020 ex87141090 20 Radiators of a kind used in motor bikes for fitting of attachments 0 % p/st 31.12.2020 ex87141090 50 Suspension damper tubes 0 % — 31.12.2021 ex87149110 ex87149110 ex87149110 23 33 70 Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles 0 % — 31.12.2018 ex87149130 ex87149130 ex87149130 24 34 71 Front forks with aluminium legs, for use in the manufacture of bicycles 0 % — 31.12.2018 ex87149610 10 Pedals, for use in the manufacture of bicycles 0 % — 31.12.2020 ex87149990 30 Seat posts, for use in the manufacture of bicycles 0 % p/st 31.12.2020 ex90011090 10 Image reverser made up from an assembly of optical fibres 0 % — 31.12.2018 ex90011090 30 Polymer optical fibre with: of a kind used in the manufacture of polymer fibre cables 0 % — 31.12.2021 ex90011090 ex90019000 40 18 Fibre optic plates: of a kind used in dental x-ray systems 0 % — 31.12.2021 ex90012000 10 Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film 0 % — 31.12.2017 ex90012000 ex90019000 20 55 Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut 0 % — 31.12.2018 ex90015041 ex90015049 30 30 Round organic uncut corrective eyeglass lens blanks, finished on both sides: of a kind used to be processed in order to be adapted to a pair of glasses 1,45 % — 31.12.2021 ex90015080 30 Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses 0 % — 31.12.2021 ex90019000 25 Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % — 31.12.2017 ex90019000 35 Rear projection screen, comprising a lenticular plastic plate 0 % p/st 31.12.2018 ex90019000 45 Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends 0 % p/st 31.12.2018 ex90019000 60 Reflector or diffuser sheets in rolls 0 % — 31.12.2018 ex90019000 65 Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens 0 % — 31.12.2019 ex90019000 70 Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90o and a prism pitch of 50 μm 0 % — 31.12.2021 ex90019000 75 Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules 0 % p/st 31.12.2017 ex90019000 85 Light guide panel made of poly(methyl methacrylate): for use in the manufacture of backlight units for flat screen TVs 0 % — 31.12.2020 ex90021100 10 Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not more than 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors 0 % — 31.12.2018 ex90021100 ex90021900 15 10 Infrared lens with motorised focus adjustment, for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes 0 % — 31.12.2020 ex90021100 20 Lenses of a kind used for the production of visualizers or live image cameras 0 % — 31.12.2017 ex90021100 ex90021900 25 20 Infrared optical unit composed of assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 30 Lenses of a kind used for the production of visualizers or live image cameras 0 % — 31.12.2017 ex90021100 ex90021900 35 30 Infrared optical unit composed of assembled on a machined aluminum alloy support, of kind a used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 40 Lenses of a kind used for the production of visualizers or live image cameras 0 % — 31.12.2017 ex90021100 ex90021900 45 40 Infrared optical unit of a kind used for thermal cameras 0 % — 31.12.2021 ex90021100 50 Lens unit: 0 % — 31.12.2018 ex90021100 ex90021900 55 50 Infrared optical unit composed of assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 ex90021900 65 60 Infrared optical unit of a kind used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 70 Lenses of a kind used for the production of visualizers or live image cameras 0 % — 31.12.2017 ex90021100 ex90021900 75 70 Infrared optical unit composed of assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 80 Lens assembly with: for use in the manufacture of CMOS automotive cameras 0 % — 31.12.2019 ex90022000 10 Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 0 % — 31.12.2018 ex90029000 20 Lens, mounted, having a fixed focal length of 3,8 mm (± 0,19 mm) or 8 mm (± 0,4 mm), with a relative aperture of F2.0 and a diameter of not more than 33 mm, for use in the manufacture of charged-coupled (CCD) cameras 0 % p/st 31.12.2018 ex90029000 30 Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates 0 % p/st 31.12.2018 ex90029000 40 Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % p/st 31.12.2017 ex90138090 10 Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of: of a kind used for incorporation into products of Chapters 84-90 and 95 0 % p/st 31.12.2019 ex90141000 30 Electronic compass, as a geomagnetic sensor, in a housing (e.g. CSWLP, LGA, SOIC) suitable for fully automated printed circuit board (PCB) assembly, with the following main components: of a kind used in the manufacture of products falling in chapters 84-90 and 94 0 % p/st 31.12.2018 ex90258040 30 Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of 0 % p/st 31.12.2018 ex90258040 50 Electronic semiconductor sensor for measuring at least two of the following quantities: of a kind used for incorporation into products of Chapters 84-90 and 95 0 % p/st 31.12.2019 ex90271090 10 Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing 0 % — 31.12.2018 ex90291000 30 Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex90292031 ex90299000 10 20 Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least: communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019 ex90328900 20 Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm 0 % p/st 31.12.2018 ex90328900 30 Electronic controller of electric power steering (EPS controller) 0 % p/st 31.12.2018 ex90328900 40 Digital valve controller for controlling liquids and gases 0 % p/st 31.12.2017 ex90328900 50 Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprising 0 % — 31.12.2021 ex94019080 10 Ratchet disk of a kind used in the manufacture of reclining car seats 0 % p/st 31.12.2020 ex94019080 20 Sidemember with a thickness of 0,8 mm or more but not more than 3,0 mm, used in the manufacture of reclining car seats 0 % p/st 31.12.2018 ex94019080 30 Steel bracket for mounting safety features seats with thickness of 1 mm or more but not more than 2,5 mm used in the manufacture of reclining car seats 0 % p/st 31.12.2018 ex94019080 40 Steel handles for controlling the seat adjustment mechanism used in the manufacture of reclining car seats 0 % p/st 31.12.2018 ex94019080 60 Outer part of a headrest made of perforated bovine leather, lined with a scrim-reinforced lamination liner and without foam padding, after reworking (stitching of the leather and embroidery application) used in manufacture of seats of motor vehicles 0 % — 31.12.2020 ex94054035 10 Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more but not more than 600 mm (± 1 mm), for the manufacture of goods of heading 8528 0 % p/st 31.12.2018 ex94054039 10 Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a light engine of a series of 3 or more but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set 0 % p/st 31.12.2018 ex94054039 20 LED array of white silicone, containing: 0 % p/st 31.12.2018 ex95030075 ex95030095 10 10 Plastic cable car scale models, whether or not with a motor, for printing 0 % p/st 31.12.2020 ex96072010 10 Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers 0 % — 31.12.2020 ex96072090 10 Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers 0 % — 31.12.2020 ex96089100 10 Non-fibrous plastic pen-tips with an internal canal 0 % — 31.12.2018 ex96089100 20 Felt tips and other porous-tips for markers, without internal canal 0 % — 31.12.2018 ex96121010 10 Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation) 0 % — 31.12.2018

industrial monocarboxylic fatty acids of subheading 38231910,

methyl esters of fatty acids of heading 2915 or 2916,

fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,

fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,

stearic acid of subheading 38231100,

goods of heading 3401, or

fatty acids with high purity of heading 2915

conjugated linoleic acid of heading 3823 or

ethyl- or methyl esters of linoleic acid of heading 2916

15 % or more but not more than 35 % of wheat derived Maltodextrin,

15 % or more but not more than 35 % of whey (milk serum),

10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,

10 % or more but not more than 30 % of blended, aged spray dried cheese,

5 % or more but not more than 15 % of buttermilk and

0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid

of the Genus Malpighia spp.,

with a sugar content by weight of more than 13 % but not more than 30 %

of the Genus Musa cavendish,

with a sugar content by weight of more than 13 % but not more than 30 %

of the Genus Mangifera spp.,

with a sugar content by weight of not more than 30 %

of the Genus Carica spp.,

with a sugar content by weight of more than 13 % but not more than 30 %

of the Genus Psidium spp.,

with a sugar content by weight of more than 13 % but not more than 30 %

not from concentrate,

of the genus Mangifera,

of a Brix value of 14 or more, but not more than 20

more than 6 % of salt concentration,

0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and

whether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995

not from concentrate,

of the genus Ananas,

of a Brix value of 11 or more but not more than 16,

with a Brix value of more than 20 but not more than 67,

a value of more than EUR 30 per 100 kg net weight,

containing added sugar

of a Brix value of 40 or more but not more than 66,

in immediate packings of a content of 50 litres or more

with a Brix value of 13,7 or more but not more than 55,

of a value of more than EUR 30 per 100 kg net weight,

in immediate packings of a content of 50 litres or more, and

with added sugar

with a Brix value of more than 48 but not more than 67,

in immediate packings of a content of 50 litres or more

of the species Euterpe oleracea,

frozen,

not sweetened,

not in powder form,

of a Brix value of 23 or more but not more than 32,

with a Brix value of 10 or more but not more than 13,7,

of a value of more than EUR 30 per 100 kg net weight,

in immediate packings of a content of 50 litres or more, and

without added sugar

unfermented,

not containing added spirit or sugar, and

in immediate packing of a content of 20 litres or more

more than 30 % but not more than 35 % licorice extract,

more than 65 % but not more than 70 % tricaprylin,

90 % or more by weight of saturates, and

not more than 0,03 % by weight of sulphur,

not more than 1 mg/kg of sulphur

more than 99 % by weight of saturated hydrocarbons

more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and

a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or

a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more

with a particle size of not more than 20 μm, and

of a kind used in the production of polyethylene

in the form of powder

of a purity by weight of 99,7 % or more

with a median grain size of 0,7 μm or more, but not more than 2,1 μm

where 70 % of the particles have a diameter of not more than 3 μm

94 % or more, but less than 98,5 % of aluminium oxide,

2 % (± 1,5 %) of magnesium oxide,

1 % (± 0,6 %) of yttrium oxide,

either 2 % (± 1,2 %) of lanthanum oxide or

2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,

in the form of powder

with a purity by weight of 99,5 % or more

with a decomposition point of 263o C or more

with a particle size of 4 μm (± 1 μm)

with a Total-Na2O-content by weight of not more than 0,06 %

of a purity by weight of 99,9 % or more,

with an average grain-size of 0,7 μm or more but not more than 2,1 μm

not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium),

not more than 0,01 % of phosphorus (expressed as elemental phosphorus),

2 mg/kg or more of arsenic,

200 mg/kg or more of calcium,

200 mg/kg or more of chlorides,

20 mg/kg or more of iron,

150 mg/kg or more of magnesium,

20 mg/kg or more of heavy metals,

300 mg/kg or more of potassium,

300 mg/kg or more of sodium,

200 mg/kg or more of sulphates,

a purity by weight of 98 % or more and

not more than 10ppm iron

0,25 % of Sec-butyl bromide

0,06 % of n-butyl bromide

0,06 % of n-propyl bromide

not more than 600 ppm by weight of R134 (1,1,2,2-tetrafluoroethane),

not more than 5 ppm by weight of R143a (1,1,1-trifluoroethane),

not more than 2 ppm by weight of R125 (pentafluoroethane),

not more than 100 ppm by weight of R124 (1-chloro-1,2,2,2-tetrafluoroethane),

not more than 30 ppm by weight of R114 (1,2-dichlorotetrafluoroethane),

not more than 50 ppm by weight of R114a (1,1-Dichlorotetrafluoroethane),

not more than 250 ppm by weight of R133a (1-Chloro-2,2,2-Trifluoroethane),

not more than 2 ppm by weight of R22 (Chlorodifluoromethane),

not more than 2 ppm by weight of R115 (Chloropentafluoroethane),

not more than 2 ppm by weight of R12 (Dichlorodifluoromethane),

not more than 20 ppm by weight of R40 (Methyl chloride),

not more than 20 ppm by weight of R245cb (1,1,1,2,2-pentafluoropropane),

not more than 20 ppm by weight of R12B1 (Chlorodifluorobromomethane),

not more than 20 ppm by weight of R32 (Difluoromethane),

not more than 15 ppm by weight of R31 (Chlorofluoromethane),

not more than 10 ppm by weight of R152a (1,1-Difluoroethane),

not more than 20 ppm by weight of 1131 (1-Chloro-2 Fluoroethylene),

not more than 20 ppm by weight of 1122 (1-Chloro-2,2-Difluoroethylene),

not more than 3 ppm by weight of 1234yf (2,3,3,3-Tetrafluoropropene),

not more than 3 ppm by weight of 1243zf (3,3,3 Trifluoropropene),

not more than 3 ppm by weight of 1122a (1-chloro-1,2-difluoroethylene),

not more than 4,5 ppm by weight of 1234yf+1122a+1243zf (2,3,3,3-tetrafluoropropene, +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene),

not more than 3 ppm by weight of any individual unspecified/unknown chemical,

not more than 10 ppm by weight of all unspecified/unknown chemicals combined,

not more than 10 ppm by weight of Water,

with an acidity level of not more than 0,1 ppm by weight,

without Halides,

not more than 0,01 % by volume of High Boilers,

without any odour (no malodour)

0,001 mg/kg or less of tetrachlorodibenzodioxines,

0,001 mg/kg or less of tetrachlorodibenzofurans,

0,2 mg/kg or less of tetrachlorobiphenyls

85 (± 10) % by weight of 4-isobutyl-2-methylbenzaldehyde (CAS RN 73206-60-7)

15 (± 10) % by weight of 2-isobutyl-4-methyllbenzaldehyde (CAS RN 68102-28-3)

0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),

0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and

0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)

72 % or more but not more than 82 % of 4-methyl-m-phenylenediamine, and

17 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and

not more than 0,23 % of residual tar

40 % (± 2 %) by weight of tetrapropylammonium hydroxide,

0,3 % by weight or less of carbonate,

0,1 % by weight or less of tripropylamine,

500 mg/kg or less of bromide and

25 mg/kg or less of potassium and sodium taken together

35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,

not more than 1000 mg/kg of chloride,

not more than 2 mg/kg of iron and

not more than 10 mg/kg of potassium

C.I. Disperse Orange 61,

C.I. Disperse Blue 291:1,

C.I. Disperse Violet 93:1,

C.I. Disperse Red 54

N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0)

N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) and

N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)

lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1),

C.I. Acid Green 25 (CAS RN 4403-90-1) and

C.I. Acid Blue 80 (CAS RN 4474-24-2)

Colourant Reactive Yellow 201 (CAS RN 27624-67-5),

1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or

3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)

35 % or more but not more than 40 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1)

not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9)

not more than 3 % of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5)

55 % or more but not more than 65 % of water

72 % (± 2 %) of mica (CAS RN 12001-26-2) and

28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)

57 % or more but not more than 63 % of aluminium oxide (CAS RN 1344-28-1)

37 % or more but not more than 42 % of titanium dioxide (CAS RN13463-67-7), and

1 % or more but not more than 2 % of triethoxycaprylyl silane (CAS RN 2943-75-1)

not more than 85 % by weight of silver,

not less than 2 % by weight of palladium,

barium titanate,

terpineol, and

ethyl cellulose,

30 % by weight or more, but not more than 50 % of silver and

8 % by weight or more, but not more than 17 % of palladium

of a thickness of 0,3 μm or more but not more than 10 μm, and

coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)

0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents

75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3)

(65 ± 10) % of γ-butyrolactone,

(30 ± 10) % of polyamide resin,

(3,5 ± 1,5) % of naphthoquinone ester derivative and

(1,5 ± 0,5) % of arylsilicic acid

styrene

alkoxystyrene

alkylacrylates

methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3'-naphtho[2,1-b][1,4]oxazine]-9'-carboxylate,

methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol,

ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol

consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),

with a total solid content by weight of 55 % or more, but not more than 57 %, and

with a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,

1 % or more, but not more than 10 % of amorphous silicon dioxide or

3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

wax;

a vinyl-based polymer and

a colouring agent

15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and

10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers

Methyl ethyl ketone (CAS RN 78-93-3)

Heptane (CAS RN 142-82-5), and

Toluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)

an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml,

a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 % and

a pH value of 6,5 or more, but not more than 8,5

by weight not more than 12 % of diazooxonaphthalenesulphonic acid ester

phenolic resins

phenolic or acrylic resins

a maximum 2 % by weight of light sensitive acid precursor,

acrylate polymers,

methacrylate polymers,

derivatives of styrene polymers,

not more than 10 % by weight of naphthoquinonediazide esters,

2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene

not more than 7 % by weight of epoxy-containing derivatives

55 % or more but not more than 75 % by weight of xylene and

12 % or more but not more than 18 % by weight of ethylbenzene

20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,

25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,

5 % or more but not more than 30 % of acrylates,

not more than 12 % of a photoinitiator

styrene acrylate/butadiene copolymer

either carbon black or an organic pigment

whether or not containing polyolefin or amorphous silica

containing by weight 50 % or more but not more than 75 % of rosin esters,

with an acid value of not more than 25,

Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,

Bacillus thuringiensis subsp. kurstaki or,

Bacillus thuringiensis subsp. israelensis or,

Bacillus thuringiensis subsp. aizawai or,

Bacillus thuringiensis subsp. tenebrionis

24 % or more but not more than 26 % of pyrithione zinc (INN), or

39 % or more but not more than 41 % of pyrithione zinc (INN)

30 % or more of tepraloxydim (ISO) and

not more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons

38,8 % or more but not more than 41,2 % of Gibberellin A3, or

9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7

1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine

1,8 % of sodium para-nitrophenolate,

1,2 % of sodium ortho-nitrophenolate,

0,6 % of sodium 5-nitroguaiacolate

3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 % and

containing less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene

55 % or more of Gibberellin A4,

1 % or more but not more than 35 % of Gibberellin A7,

90 % or more of Gibberellin A4 and Gibberellin A7 combined

not more than 10 % of a combination of water and other naturally occurring Gibberellins

1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),

1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),

1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and

1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)

70 % or more, but not more than 90 % of tin

not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium

4,9 % of 1,2,4-trimethyl-benzene,

4,9 % of naphthalene, and

0,5 % of 1,3,5-trimethyl-benzene

esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),

35 % or more but not more than 55 % by weight of mineral oils and

with a chlorine content of not more than 0,05 % by weight,

borated magnesium (C16-C24) alkylbenzene sulphonates and

mineral oils,

containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),

containing 35 % or more but not more than 55 % by weight of mineral oils,

with a chlorine content by weight of not more than 0,05 %,

having a total base number of less than 15,

zinc bis[bis(tetrapropylenephenyl)] bis(hydrogen dithiophosphate) (CAS RN 11059-65-7),

triphenyl thiophosphate (CAS RN 597-82-0),

triphenyl phosphite (CAS RN 101-02-0), and

mineral oils,

Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)

40 % or more but not more than 60 % by weight of mineral oils and

having a total base number more than 120

mainly sulphurized diisobutylene,

calcium sulphonate,

dialkylaminoalkyl polyisobutylene succinate, and

mineral oils,

long chain alkyltoluene calcium sulphonates,

more than 30 % but not more than 50 % by weight of mineral oils, and

having a total base number of more than 310 but not more than 340,

a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10000 but not more than 20000, and

more than 15 %, but not more than 30 % by weight of mineral oils,

20 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, and

mineral oils,

calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and

mineral oils,

o-amino polyisobutylenephenol (CAS RN 78330-13-9),

polyisobutylene succinimide (CAS RN 84605-20-9),

alkenylimidazoline (CAS RN 68784-17-8),

nonylated diphenylamine derivatives (CAS RN 36878-20-3 and CAS RN 27177-41-9), and

more than 30 %, but not more than 45 % by weight of mineral oils,

a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and

more than 50 % but not more than 75 % by weight of mineral oils,

an (C8-18) alkyl methacrylate and N-[3-(dimethylamino)propyl]methacrylamide copolymer,

an ethylene-propylene copolymer,

an ethylene-propylene copolymer chemically modified with succinic anhydride, 4-(4-nitrophenyl) aniline and 3-nitroaniline, and

more than 15 % but not more than 30 % by weight of mineral oils,

overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and

by weight more than 25 % but not more than 50 % of mineral oils,

based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

containing mineral oils,

overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and

by weight more than 40 % but not more than 60 % of mineral oils,

low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) and

by weight more than 40 % but not more than 60 % of mineral oils,

a polyisobutylene succinimide based mixture, and

more than 40 % but not more than 50 % by weight of mineral oils,

based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,

with a total base number (TBN) of 280 or more but not more than 320,

an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and

by weight more than 40 % but not more than 60 % of mineral oils,

a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and

more than 35 % but not more than 50 % by weight of mineral oils,

containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

containing mineral oils,

with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,

with a total base number (TBN) of more than 20,

borated succinimide compounds (CAS RN 134758-95-5),

mineral oils, and

having a total base number (TBN) greater than 40,

Calcium (C10-C14) dialkylbenzenesulfonates,

more than 40 %, but not more than 60 % by weight of mineral oils,

a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and

more than 50 % but not more than 80 % by weight of mineral oils

polyisobutylene aromatic polyamine succinimide,

more than 40 % but not more than 60 % by weight of mineral oils,

polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

containing more than 31,9 % but not more than 43,3 % by weight of mineral oils,

not more than 0,05 % by weight chlorine, and

having a total base number (TBN) greater than 20,

containing more than 20 % but not more than 45 % by weight of mineral oils,

based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,

products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9) and

more than15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent,

by weight more than 28 %, but not more than 35 % of 4-monononyldiphenylamine, and

by weight more than 50 % but not more than 65 % of 4,4'-dinonyldiphenylamine,

by weight a total percentage of 2, 4-dinonyldiphenylamine and 2, 4'-dinonyldiphenylamine of not more than 5 %,

mainly sulphurized diisobutylene,

calcium sulphonate, and

dialkylaminoalkyl polyisobutylene succinate

more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and

more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),

bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)

more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2);

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);

polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3)

bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and

methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)

25 % or more but not more than 50 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)

not more than 20 % of other organic compounds

on a carrier of polypropylene (CAS RN 9003-07-0)

80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and

20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate

2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and

either N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or

N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)

2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),

2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and

2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)

branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and

1-methoxy-2-propyl acetate (CAS RN 108-65-6)

a hindered amine: N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and

either an o-hydroxyphenyl triazine UV light absorber or

a chemically modified phenolic compound

69 % or more but not more than 71 % of 1-methoxypropan-2-ol,

29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate

chromium trioxide (CAS RN 1333-82-0),

dichromium trioxide (CAS RN 1308-38-9),

in the form of solid spheres,

of a diameter of 4 mm or more but not more than 12 mm, and

consisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide,

20 % or more but not more than 30 % of titanium and

55 % or more but not more than 72 % of chlorine

tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride; and

silicon dioxide

containing 6,6 % (± 0,6 %) by weight of magnesium, and

containing 2,3 % (± 0,2 %) by weight of titanium

containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,

in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm

4 % or more but not more than 10 % of titanium and

10 % or more but not more than 20 % magnesium

35 % or more but not more than 60 % of eicosylbenzene,

25 % or more but not more than 50 % of docosylbenzene,

5 % or more but not more than 25 % of tetracosylbenzene

88 % or more but not more than 98 % of hexadecylnaphthalene

2 % or more but not more than 12 % of dihexadecylnaphthalene

industrial monocarboxylic fatty acids of heading 3823,

stearic acid of heading 3823,

stearic acid of heading 2915,

palmitic acid of heading 2915, or

animal feed preparations of heading 2309

industrial monocarboxylic fatty acids of heading 3823,

stearic acid of heading 3823,

stearic acid of heading 2915,

palmitic acid of heading 2915, or

animal feed preparations of heading 2309

38 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),

21 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9) and

1 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)

urethane acrylates,

tripropylene glycoldiacrylate,

ethoxylated bisphenol A acrylate or

poly(ethyleneglycol) 400 diacrylate

on a support of mineral wax, whether or not modified chemically, or

in the form of a solution in an organic solvent

85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and

5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate

trioctylphosphine oxide (CAS RN 78-50-2),

dioctylhexylphosphine oxide (CAS RN 31160-66-4),

octyldihexylphosphine oxide (CAS RN 31160-64-2) and

trihexylphosphine oxide (CAS RN 3084-48-8)

3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) and

ethyl-6'-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9'-[9H]xanthene]-2'-carboxylate (CAS RN 154306-60-2)

either diethylene glycol, dodecandioic acid and ammonia water,

or N,N-dimethylformamide,

or γ-butyrolactone,

or silicon oxide,

or ammonium hydrogen azelate,

or ammonium hydrogen azelate and silicon oxide,

or dodecandioic acid, ammonia water and silicon oxide,

a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and

30 % or more but not more than 35 % by weight of isobutyl alcohol

89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol

0,1 % or more but not more than 1 % of colourants

1 % or more but not more than 10 % of fluoropolymers

20 % (± 1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9),

10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)

64 %(± 7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and

6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)

80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and

not more than 1 % triphenyl phosphate (CAS RN 115-86-6)

0,1 % or more but not more than 0,5 % by weight of ammonia (CAS RN 1336-21-6) and

0,3 % or more but not more than 10 % by weight of polycarboxylate (linear polymers of acrylic acid)

74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and

10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)

50 % (± 2 %) by weight of bis-alkoxylated ethyl acetoacetate aluminium chelates,

in an ink oil (white mineral) solvent

dipropylene glycol

tripropylene glycol

tetrapropylene glycol or

pentapropylene glycol

either an aluminium-alkyl compound,

or an organic complex of tungsten

or an organic complex of molybdenum

70 % or more, but not more than 90 % of (S)-indoline-2-carboxylic acid (CAS RN 79815-20-6) and

10 % or more, but not more than 30 % of o-chlorocinnamic acid (CAS RN 3752-25-8)

75 % or more of sterols,

not more than 25 % of stanols,

85 % or more of zinc diacrylate (CAS RN 14643-87-9)

and not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7)

C,C’-azodi(formamide) (CAS RN 123-77-3),

magnesium oxide (CAS RN 1309-48-4) and

zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)

60 % or more, but not more than 80 % of sitosterols,

not more than 15 % of campesterols,

not more than 5 % of stigmasterols and

not more than 15 % of betasitostanols

52 % or more but not more than 76 % of iron(III)oxide,

13 % or more but not more than 42 % of manganese oxide, and

2 % or more but not more than 22 % of zinc oxide

either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,

or 30 % or more of lead and 5 % or more of niobium,

ferrite (Iron oxide) (CAS RN 1309-37-1)

manganese oxide (CAS RN 1344-43-0)

magnesium oxide (CAS RN 1309-48-4)

styrene acrylate copolymer

52 % (± 10 %) of cuprous oxide (CAS RN 1317-39-1),

38 % (± 10 %) of cupric oxide (CAS RN 1317-38-0) and

10 % (± 5 %) of metallic copper (CAS RN 7440-50-8)

either 1,6 mm or more but not more than 3,4 mm,

or 4 mm or more but not more than 6 mm

1 % or more but not more than 40 % of molybdenum oxide,

10 % or more but not more than 50 % of nickel oxide,

30 % or more but not more than 70 % of tungsten oxide

a melting point of between 1600 °C and 1800 °C,

a density of 0,6 - 0,8 g/cm3,

75 % or more, but not more than 85 % of copper,

inorganic oxides,

ethyl cellulose, and

a solvent

0,1 % or more but not more than 1 % of platinum, and

0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)

65 % or more but not more than 75 % of C12 FAME,

21 % or more but not more than 28 % of C14 FAME,

4 % or more but not more than 8 % of C16 FAME,

50 % or more but not more than 58 % of C8-FAME

35 % or more but not more than 50 % of C10-FAME

15 % or more but not more than 32 % of C16 FAME

65 % or more but not more than 85 % of C18 FAME

a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and

a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and

a vicat softening temperature of min. 94 °C

not more than 5 % by weight of comonomer,

a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and

a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3

an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (ASTM D4094), and

a melt flow rate of 14g/10 min (MFR 125 °C/2,16 kg, ASTM D1238) or more

an acrylic acid content of 6 % or more but not more than 50 % by weight, and

a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)

10 % or more but not more than 20 % by weight of octene,

a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10.0/2.16),

a melt index (190 °C/2,16 kg) of 0,4 g/10 min or more but not more than 0,6 g/10 min,

a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,

a gel area per 24,6 cm3 of not more than 20 mm2; and

an anti-oxidant level of not more than 240 ppm

more than 10 % but not more than 20 % by weight of copolymer,

a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and

a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3

more than 5 %, but not more than 8 % by weight of comonomer,

a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and

a density of 0,922 g/cm3 or more, but not more than 0,928 g/cm3

80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and

6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)

with a specific gravity of 0,862 or more, but not more than 0,865,

able to stretch to at least 200 % its original length,

with a hysteresis of 50 % (± 10 %),

with permanent deformation of not more than 20 %,

7 mg/kg of aluminium,

2 mg/kg of iron,

1 mg/kg of magnesium,

8 mg/kg of chloride

of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),

of a heat of fusion of 15 J/g or more but not more than 70 J/g,

of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),

of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)

of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method);

of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method);

of a Melt Flow Rate (MFR) at 230 °C/2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method);

with 40 % or more but not more than 80 % by weight of polypropylene,

with 10 % or more but not more than 30 % by weight of glass fibre,

with 10 % or more but not more than 30 % by weight of mica

a density of 0,880 g/cm3 or more but not more than 0,913 g/cm3(as determined by test method ASTM D1505),

a tensile strength at yield of 350 kg/cm2 or more but not more than 390 kg/cm2 (as determined by test method ASTM D638)

a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648)

a copolymer of propylene and ethylene and

21 % (± 3 %) by weight of polystyrene

a flashpoint of 250 °C or more,

a viscosity index of 150 or more,

of a number average molecular weight (Mn) of 650 or more

liquid at room temperature

obtained by cationic polymerisation of C-5 alkenes monomers

with a number average molecular weight (Mn) of 370 (± 50)

with a weight average molecular weight (Mw) of 500 (± 100)

a melting point of 268 °C or more but not more than 272 °C

a setting point of 232 °C or more but not more than 247 °C,

whether or not containing additives and filling material

78 ± 4 % styrene,

9 ± 2 % n-butyl acrylate,

11 ± 3 % n-butyl methacrylate

1,5 ± 0,7 % methacrylic acid and

0,01 % or more but not more than 2,5 % of polyolefinic wax

83 ± 3 % styrene,

7 ± 2 % n-butyl acrylate,

9 ± 2 % n-butyl methacrylate and

0,01 % or more but not more than 1 % of polyolefinic wax

82 ± 6 % styrene,

13,5 ± 3 % n-butyl acrylate,

1 ± 0,5 % methacrylic acid and

0,01 % or more but not more than 8,5 % of polyolefinic wax

86 % or more but not more than 90 % of styrene-acrylic-copolymer and

9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)

74 % (± 4 %) styrene,

24 % (± 2 %) n-butylacrylate and

0,01 % or more but not more than 2 % methacrylic acid

25 % or more but not more than 26 % of styrene-acrylic-copolymer and

5 % or more but not more than 6 % of glycol

75 % (± 7 %) styrene and

25 % (± 7 %) methylmethacrylate

minimum 65 % styrene,

maximum 25 % divinylbenzene

45 % or more but not more than 65 % of polymers of styrene

35 % or more but not more than 45 % of poly(phenylene ether)

not more than 10 % of other additives

metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment

fluorescent, as characterized by emitting light during absorption of ultraviolet radiation

bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale

a degree of polymerisation of 1000 (± 300) monomer units,

a coefficient of heat transmission (K-value) of 60 or more, but not more than 70,

a volatile material content of less than 2,00 % by weight,

a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight,

87 % or more but not more than 92 % of vinyl chloride,

2 % or more but not more than 9 % of vinyl acetate and

1 % or more but not more than 8 % of vinyl alcohol,

9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and

5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol

a viscosity of not more than 50000 Pa·s at 120 °C as determined by the test method ASTM D 3835

a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test,

a residual monomer content of less than 1 %

chloromethyl vinyl ether,

chloroethyl vinyl ether,

chloromethylstyrene,

vinyl chloroacetate,

methacrylic acid,

butenedioic acid monobutyl ester,

33 % or more but not more than 37 % of butyl methacrylate — methacrylic acid copolymer,

24 % or more but not more than 28 % of propylene glycol, and

37 % or more but not more than 41 % of water

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and

48 % or more but not more than 52 % of propylene oxide and

48 % or more but not more than 52 % of butylene oxide

with a glasstransitiontemperature of 210 °C,

with a weight average molecular weight (Mw) of 35000 or more but not more than 80000,

with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram

containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,

not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and

containing solvents

containing by weight 21 % or more of brome,

not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and

containing solvents

a zinc borate hydrate content of not more than 40 % by weight,

a diantimony trioxide content of not more than 5 % by weight

containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol,

with p-cumylphenol endcaps, and

with a weight average molecular weight (Mw) of 29900 or more but not more than 31900

with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, and

containing not more than 10 % by weight of other modifiers or additives

not more than 75 μm of polyethylene,

not more than 50 μm of polyamide,

not more than 15 μm of polyethylene terephthalate and

not more than 9 μm of aluminium

hexanedioic acid

12-aminododecanoic acid

hexahydro-2H-azepin-2-one, and

1,6-hexanediamine

1,3-benzenedimethanamine (CAS RN 1477-55-0) and

adipic acid (CAS RN 124-04-9)

alkylphenol — formaldehyde resin, whether or not brominated, and

zinc oxide

phenolic resin polymer (CAS RN 9003-35-4) with 80 % by weight or more but not more than 90 %

phenol (CAS RN 108-95-2) with not more than 5 % and

hexamethylenetetramine (CAS RN 100-97-0) with 5 % by weight or more but not more than 15 %

60 % or more of two-functional acrylated polyurethane oligomers and

30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and

10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates

14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,

3 % or more but not more than 5 % of enzymatically modified starch, and

77 % or more but not more than 83 % of water

16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,

19 % or more but not more than 23 % of diethylene glycol butyl ether, and

60 % or more but not more than 64 % of water

34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,

37 % or more but not more than 39 % of propylene glycol, and

26 % or more but not more than 28 % of water

10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and

10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)

30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and

10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)

an iodine value of more than 120 and

a Gardner Colour of more than 10 for the pure product or

a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)

83 % or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene),

a synthetic rubber,

whether or not containing by weight 7 % or more of tricyclopentadiene.

either an aluminium-alkyl compound,

or an organic complex of tungsten

or an organic complex of molybdenum

Cyanic acid, C,C’-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1),

1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0),

in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight

containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and

of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method),

titanium dioxide

poly(methyl methacrylate)

calcium carbonate

binding agents

polyamide-6 or poly(epoxy anhydride)

7 % or more but not more than 9 % of polytetrafluorethylene if present

10 % or more but not more than 25 % of inorganic fillers

coated with non-vulcanised natural or synthetic rubber

with a width of 20 mm or more but not more than 40 mm

containing silicone, aluminium hydroxide, acryl and urethane

coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and

on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner

with a thickness of 100 μm or more,

an elongation at break of not more than 100 %,

coated on one side with a pressure sensitive silicon adhesive

with a gloss of more than 30 degrees according to ASTM D2457,

whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner

of a thickness of 100 μm or more,

coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner

with pressure sensitive silicone polymer adhesive,

of a total thickness of not more than 0,7 mm,

of a total width of 1 cm or more, but not more than 1 m,

whether or not in rolls

with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces,

of a total thickness of 0,025 mm or more, but not more than 0,7 mm, and

of a total width of 6 cm or more, but not more than 1 m,

whether or not in rolls,

of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern

covered on one or both sides with one or more layers of plastic or metallisation, and

whether or not covered on one side with a self-adhesive layer and a release sheet

a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,

a layer of an acrylic resin having embedded glass beads,

a layer of an acrylic resin hardened by a melamine cross-linking agent,

a metal layer,

an acrylic adhesive, and

a release film

self-adhesive on one side,

of a total thickness of 0,025 mm or more, but not more than 0,09 mm,

of a total width of 60 mm or more, but not more than 1110 mm,

whether or not containing a watermark,

with or without an application tape coated on one side with an adhesive;

a layer of acrylic or vinyl polymer,

a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,

a layer of metallisation,

an adhesive layer, and

a release sheet

whether or not containing an additional layer of polyester

a copolymer of acrylic resin,

polyurethane,

a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,

glass microspheres, and

an adhesive layer, with a release liner on one or both sides

coated on one side with an acrylic UV-sensitive adhesive and a liner

of a total thickness of 65 μm or more without release liner

free from impurities or faults,

coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,

whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,

with a total thickness without the liner of 54 μm or more but not more than 64 μm, and

a width of more than 1295 mm but not more than 1305 mm

consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,

covered on both sides with one or more layers of plastic material and

covered on one side with an adhesive layer and a release sheet

a layer of polyurethane containing glass micro beads,

a layer of poly(ethylene vinyl acetate),

an adhesive layer, and

a release sheet

whether or not with a pressure or heat sensitive adhesive layer

whether or not with a release film

with a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together

with a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83)

with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 gm2) with pressure sensitive layer

a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide,

whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions,

not more than 6 % by weight of other additives,

a pressure sensitive adhesive; and

covered on one side with a release liner,

whether or not with a separate self-adhesive over laminate protective film,

of a total thickness of not more than 400 μm

containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or more

having on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2

coated on the other side with a pressure sensitive adhesive and a release liner

a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent,

a second layer containing a maleic anhydride copolymer,

a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,

a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,

a pressure sensitive adhesive; and

covered on one side with a release liner

whether or not with a separate self-adhesive over laminate protective film

of a total thickness of not more than 400 μm

with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride),

on one side covered with a layer of poly(vinyl fluoride),

whether or not with a pressure sensitive adhesive layer and a release film on the other side,

with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together,

with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), and

with a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer

an adhesive layer based on synthetic rubber with a thickness of 8 μm or more but not more than 17 μm,

a polyolefin layer with a thickness of 28 μm or more but not more than 40 μm, and

a non-silicone release layer with a thickness below 1 μm

a polymer layer

an adhesive layer

a release liner, on one side embossed, containing oblate spheres;

a poly(vinyl chloride) layer,

a polyurethane layer,

a glass microspheres layer,

a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view,

a metallised aluminium layer, and

an adhesive, covered on one side with a release liner

each layer containing a mixture of polypropylene and polyethylene,

containing not more than 3 % by weight of other polymers,

whether or not containing titanium dioxide in the core layer,

coated with an acrylic pressure sensitive adhesive and

with a release liner

of an overall thickness of not more than 110 μm

a poly(olefin) layer with a thickness of more than 95 but not more than 110 microns

an adhesive layer with a thickness of more than 5 but not more than 15 microns

a layer based on epoxy resin, with a thickness of more than 4 but not more than 100 microns

a liner consisting of poly(ethylene terephthalate) with a thickness of more than 35 but not more than 40 microns

an embossed polyester layer,

a caprolactone-cyclohexylene isocyanate copolymer layer,

a pressure sensitive adhesive

of polymers of ethylene

having a gravity of 0,94 g/cm3 or more

of a thickness of 0,019 mm ± 0,003 mm

with permanent graphics consisting of two different alternating designs whose individual length is 525 mm or more

is repetitive and equally spaced along the length of the film

is equally and visibly aligned when viewed from the back or front of the film

a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

covered on either side with two or more layers of polymeric material,

consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,

having a total thickness of 55 μm or more,

having a diameter of 500 mm or more but not more than 600 mm

a raised relief surface with embossed undulations, and

a thickness of more than 0,125 mm

with the thickness of not more than 0,1 mm,

printed on both sides with specialised coatings to allow banknote security printing

a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

covered on either side with two or more layers of polymeric material,

a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa and

a tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa

a thickness of 55 μm or more but not more than 97 μm,

a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and

a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa

each layer containing a mixture of polypropylene and polyethylene,

containing not more than 3 % by weight of other polymers,

whether or not containing titanium dioxide in the core layer,

of an overall thickness of not more than 70 μm

flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94)

dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149)

tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882)

tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882)

density range of 0,988 g/cm3 or more but not more than 1035 g/cm3 (as determined by ASTM D792)

moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570)

containing by weight 45 % or more of fillers

on a support

only dyed in the mass, or

dyed in the mass and metallised on one side

coated on both sides with a layer of epoxy acrylic resin,

of a total thickness of 37 μm (± 3 μm)

of a thickness of not more than 20 μm,

coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm

coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,

with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,

with a light transmission of more than 93 %,

with a haze value of not more than 1,3 %,

with a total thickness of 10 μm or more but not more than 350 μm,

with a width of 800 mm or more but not more than 1600 mm

composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,

having a thickness of 20 μm or more but not more than 120 μm

biodegradable and compostable (as determined by the method EN 13432)

composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),

having a thickness of 45 μm or more but not more than 50 μm,

biodegradable and compostable (as determined by the method EN 13432)

containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,

with a thickness of 0,73 mm or more but not more than 1,50 mm

a visible light transmission of 50 % or more,

coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

of a thickness of not more than 20 μm,

coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

a thickness of 5 μm or more, but not more than 14 μm,

a width of 478 mm or more, but not more than 532 mm,

a tensile strength at break of 78 MPa or more (as determined by JIS C-2318 for a film thickness of 50 μm),

an elongation at break of 50 % or more (as determined by JIS C-2318 for a film thickness of 50 μm),

a glass transition point (Tg) of 226 °C,

a continuous service temperature of 180 °C (as determined by UL-746 B for a film thickness of 50 μm),

a flammability of VTM-0 (as determined by UL 94 for a film thickness of 25 μm)

poly (tetramethylene ether glycol),

bis (4-isocyanotocyclohexyl) methane,

1,4-butanediol or 1,3-butanediol,

with a thickness of 0,25 mm or more but not more than 5,0 mm,

embossed with a regular pattern on one surface,

and covered with a release sheet

with a gloss of more than 90 degrees according to ASTM D2457

covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer

covered on the other side with a protective poly(ethylene terephthalate) film

with a total thickness of more than 204 μm but not more than 244 μm

not self-adhesive,

an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),

a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),

a total thickness of 0,38 mm or more, but not more than 7,6 mm,

a width of 99 cm or more, but not more than 305 cm,

a width of 1640 mm (± 10 mm),

a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),

a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),

a thickness of more than 365 μm but not more than 760 μm,

a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),

an elongation to break of 470 % (as determined by the method: EN ISO 527)

microspheres with a coating of metal, whether or not alloyed with gold,

an adhesive layer,

with a protective layer of silicone or poly(ethylene terephthalate) on one side,

with a protective layer of poly(ethylene terephthalate) on the other side, and

with a width of 5 cm or more but not more than 100 cm

with a length of not more than 2000 m

a width of more than 900 mm but not more than 1016 mm,

a matt finish,

a thickness of 0,43 mm (± 0,03 mm),

an elongation to break of 420 % or more but not more than 520 %,

a tensile strength of 55 N/mm2 (± 3) (as determined by the method EN ISO 527)

a hardness of 90 (± 4) (as determined by the method: Shore A [ASTM D2240]),

wrinkle inside (waves) of 6,35 mm,

a flatness of 0,025 mm

with a thickness of 2,29 mm (± 0,25 mm),

surface-treated with a foraminous adhesion promoter, and

laminated to a polyester film and a layer of textile material

polyamide-6 or poly(epoxy anhydride)

7 % or more but not more than 9 % of polytetrafluorethylene if present

10 % or more but not more than 25 % of inorganic fillers

a width of 98 mm or more but not more than170 mm,

a thickness of 15 μm or more but not more than 36 μm,

a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,

a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,

an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,

and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm

469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or

469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or

546,1 mm (± 2 mm) × 622,3 mm (± 2 mm

comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,

coated on both sides with polyamide,

of a total thickness not more than 135 μm,

of a total weight not more than 80 g/m2

laminated with a metal layer with a thickness of 0,05 mm(± 0,01 mm),

containing by weight 29,75 % or more but not more than 40,25 % of triethyleneglycol di (2-ethyl hexanoate) as plasticiser,

with a light transmission of 70 % or more (as determined by the ISO 9050 standard);

with an UV transmission of 1 % or less (as determined by the ISO 9050 standard);

with a total thickness of 0,43 mm (± 0,043 mm)

consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

having non porous, abrasion resistant or impact resistant surface properties,

fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

with or without a gasket seal,

with aluminium bosses at both ends,

wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin,

of a diameter of 213 mm or more, but not more than 368 mm,

a length of 860 mm or more, but not more than 1260 mm and

a capacity of 18 litres or more, but not more than 50 litres

of acrylonitrile-butadiene-styrene with or without polycarbonate,

coated with a copper, a nickel and a chrome layers,

with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm

a silver-colour acrylic paint, and

a transparent scratch-resistant paint

textile strings,

a wall thickness of 3,2 mm,

a metal hollow terminal pressed on both ends, and

one or more mounting brackets,

with a length of 72 mm or more but not more than 825 mm;

with a width of 18 mm or more but not more than 155 mm

of a length of 1270 mm or more, but not more than 3200 mm,

of a width of 150 mm or more, but not more than 2000 mm,

of a thickness of 0,5 mm or more, but not more than 4 mm,

not sanded and

not planed

a width of 210 mm or more but not more than 320 mm,

a length of 297 mm or more but not more than 450 mm,

a thickness or 0,45 mm or more but not more than 0,8 mm,

a poly(ethylene terephthalate) core, and

an outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),

of a thickness of 200 μm or more but not more than 280 μm and

of a weight of 20 g/m2 or more but not more than 50 g/m2

weighing 30 g/m2 or more, but not more than 60 g/m2,

containing fibres of polypropylene or of polypropylene and polyethylene,

whether or not printed, with:

on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,

and on other side a smooth untextured surface,

with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,

with a weight of not more than 150 g/m2,

in the piece or simply cut into squares or rectangles, and

not impregnated

of a weight of more than 80 g/m2 but not more than 105 g/m2 and

an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)

of weight of 160 g/m2 or more but not more than 300 g/m2,

whether or not laminated on one side with a membrane or a membrane and aluminium

a weight of 25 g/m2 or more but not more than 150 g/m2,

in the piece or simply cut into squares or rectangles,

not impregnated,

with cross-directional or machine-directional stretch properties

with a weight of 85 g/m2,

with a constant thickness of 95 μm (± 5 μm),

neither coated nor covered,

in 1 m wide rolls of 2000m to 5000 m length,

one layer consisting of knitted or crocheted polyester textile fabric,

other layer consisting of polyurethane foam,

a weight of 150 g/m2 or more, but not more than 500 g/m2,

a thickness of 1 mm or more, but not more than 5 mm

of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,

having a self-sharpening effect by constant release of the diamonds,

suitable for abrasive cutting of wafers,

whether or not containing a hole in the centre,

whether or not on a support

with a weight of not more than 377 g per piece and

with an external diameter of not more than 206 mm

90 % (± 1,5 %) of aluminium oxide

7 % (± 1 %) of titanium oxide

2 % or more of diboron trioxide,

28 % or less of silicon dioxide and

60 % or more of dialuminium trioxide

a scratch proof coating of a thickness of 45 μm (+/– 5 μm),

a total thickness of 0,45 mm or more but not more than 1,1 mm,

a width of 300 mm or more but not more than 3210 mm,

a length of 300 mm or more but not more than 2000 mm,

a visible light transmission of 90 % or more;

an optical distortion of 55o or more

of a thickness of 4,0 mm or more but not more than 4,2 mm,

with a light transmission of 91 % or more measured using a D-type light source,

coated on one surface with a fluorine doped tin dioxide reflective layer

with a total thickness variation of 1 μm or less, and

laser-engraved

whether or not a layer of chrome,

a break-resistance adhesive tape or hot-melt adhesive, and

a release film on the front side and protective paper at the back side,

a mirror support

a plastic casing and

an integrated circuit

whether or not equipped with plastic backing plate,

whether or not equipped with a heating element,

whether or not equipped with Blind Spot Module (BSM) display

a length of 1516 mm (± 1 mm);

a width of 553 mm (± 1 mm);

a thickness of 3 mm (± 0,1 mm);

the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm;

a lead content of not more than 90 mg/kg and

a corrosion resistance of 72 hours or more according to ISO 9227 salt spray test

9 % or more but not more than 16 % of magnesium oxide,

19 % or more but not more than 25 % of aluminium oxide,

0 % or more but not more than 2 % of boron oxide,

without calcium oxide,

10ppm per°C or more but not more than 12ppm per°C in the length and width, and

20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)

78 % or more of dysprosium, and

18 % or more but not more than 22 % of iron

a thickness of 2,67 mm or more, but not more than 4,11 mm,

a width of 12,57 mm or more, but not more than 16,01 mm,

a torque of 18,05 Nm or more, but not more than 73,5 Nm

an angle between the free position and the nominal position in exercise of 76o or more, but not more than 218o

whether or not with parts of other material

whether or not with parts of other metals

whether or not surface treated

whether or not printed

with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,

coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,

a width of 610 mm or more but not more than 620 mm, and

a diameter of 690 mm or more but not more than 710 mm,

consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or

consisting of multiple layers of paper, impregnated with phenolic resin,

consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

covered on one or both sides with copper foilwith a thickness of not more than 0,15 mm and

with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10GHz, as measured according to IPC-TM-650

with a maximum thickness of not more than 25μm,

coated on both sides with a copper film with a maximum thickness of 0,15 mm,

with a minimum capacitance of 1,09pF/mm2,

containing 1mg/kg or less of sodium and

mounted on a copper or aluminium support

anodized

whether or not lacquered

with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %) for use in the manufacture of goods of heading 8302

0,25 % or more but not more than 7 % of zinc, and

1 % or more but not more than 3 % of magnesium, and

1 % or more but not more than 5 % of copper, and

not more than 1 % of manganese

0,10 % or more but not more than 5 % of copper, and

0,2 % or more but not more than 6 % of magnesium, and

0,10 % or more but not more than 7 % of zinc, and

not more than 1 % of manganese

having a purity of 99,99 % by weight,

of a thickness of 0,021 mm or more but not more than 0,2 mm,

with a width of 500 mm,

with a surface oxide layer by 3 to 4 nm thick,

and with a cubic texture of more than 95 %

an aluminium content of 99,98 % or more

a thickness of 0,070 mm or more but not more than 0,125 mm

with a cubic texture

a width of 595 mm or more but not more than 605 mm, and

a diameter of 690 mm or more but not more than 710 mm,

an outer diameter of 60 mm or more but not more than 420 mm, and

a wall thickness of 10 mm or more but not more than 80 mm

height of more than 10 mm but not more than 200 mm

width of more than 10 mm but not more than 200 mm

length of more than 10 mm but not more than 200 mm

internal porosity not more than 1 mm;

outer porosity not more than 2 mm;

Rockwell hardness HRB 10 or more

consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,

with an optical density of each aluminium layer of not more than 3,0,

with each aluminium layer separated by a resin layer,

on a carrier film of PET, and

on rolls of up to 50000 metres in length

of painted aluminium,

with a length of 1011 mm or more but not more than 1500 mm,

with a width of 622 mm or more but not more than 900 mm,

with a thickness of 0,6 mm (± 0,1 mm),

a maximum cross-sectional dimension of not more than 50 μm

a resistance of 40 Ohm or more but not more than 300 Ohm at length of 1 metre

a purity by weight of 99 % or more and

a particle size of 1,0 μm or more, but not more than 5,0 μm

a copper-chromium alloy backing plate,

a diameter of 312 mm, and

a thickness of 6,3 mm

of purity by weight of more than 99,5 %

with a particle size of 0,2 mm or more but not more than 0,8 mm

35 % (± 2 %) cobalt,

25 % (± 1 %) nickel,

19 % (± 1 %) chromium and

7 % (± 2 %) iron

with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more,

a weight of 680 kg or more,

3 % or more but not more than 6 % of aluminium

2,5 % or more but not more than 5 % of tin

2,5 % or more but not more than 4,5 % of zirconium

0,2 % or more but not more than 1 % of niobium

0,1 % or more but not more than 1 % of molybdenum

0,1 % or more but not more than 0,5 % of silicon

with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3 cm or more,

a weight of 680 kg or more,

3 % or more but not more than 7 % of aluminium

1 % or more but not more than 5 % of tin

3 % or more but not more than 5 % of zinc

4 % or more but not more than 8 % of molybdenum

with a diameter of 63,5 cm or more and a length of 450 cm or more,

a weight of 6350 kg or more,

5,5 % or more but not more than 6,7 % of aluminium,

3,7 % of more but not more than 4,9 % of vanadium

a purity of 99,995 % by weight or more,

a diameter of 140 mm or more but not more than 200 mm,

a weight of 5 kg or more but not more than 300 kg

22 % (± 1 %) of vanadium, and

4 % (± 0,5 %) of aluminium

15 % (± 1 %) of vanadium,

3 % (± 0,5 %) of chromium,

3 % (± 0,5 % of tin and

3 % (± 0,5 %) of aluminium

0,8 % or more but not more than 1,2 % of copper,

0,9 % or more but not more than 1,15 % of tin,

0,25 % or more but not more than 0,45 % of silicon and

0,2 % or more but not more than 0,35 % of niobium,

exhaust systems for internal combustion engines or

tubes and pipes of subheading 81089060

0,4 % or more but not more than 0,6 % of aluminium,

0,35 % or more but not more than 0,55 % of silicon and

0,1 % or more but not more than 0,3 % of niobium

0,3 % or more but not more than 0,7 % of aluminium and

0,25 % or more but not more than 0,6 % of silicon

of a width of more than 750 mm

of a thickness of not more than 3 mm

containing more than 0,07 % by weight of oxygen (O2),

of a thickness of 0,4 mm or more but not more than 2,5 mm

conforming to the Vickers hardness HV1 standard of not more than 170

temples,

blanks of a kind used for the manufacture of spectacle parts and

bolts of the kind used for spectacle frames and mountings,

whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,

whether or not printed or surface treated,

whether or not with electrical conducting elements

whether or not with keypads foil glued on the keyboard

whether or not with protective foil

single or multilayer

an external diameter of 21 mm or more but not more than 23 mm,

a width with screw of 19 mm or more but not more than 23 mm,

a U-shaped plastic outer ring,

an assembly screw fitted to the internal diameter and used as an inner ring

with a diameter of 99,00 mm or more but not more than 136,5 mm (± 1mm),

whether or not with a ring-pull aperture

self-propelled lawn mowers, with a seat of subheading 84331151, and hand-operated lawn mowers of heading 84331190,

tractors of subheading 87019190, whose main function is that of a lawn mower,

four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010 or

snowploughs and snow blowers of subheading 843020

6 cylinders,

an output of 75 kW or more, but not more than 80 kW,

inlet and exhaust valves modified to operate continuously in heavy duty applications,

a capacity of not more than 3850 cm3, and

a rated output of 15 kW or more but not more than 85 kW,

with a heat-resistance of not more than 1050 °C,

with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm,

whether or not with an engine exhaust manifold

of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,

with a heat-resistance of not more than 1100 °C;

with a diameter of 30 mm or more, but not more than 100 mm;

with a height of 20 mm or more, but not more than 70 mm

whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm,

with a length of not more than 350 mm,

with a diameter of not more than 75 mm,

with a height of not more than 110 mm

discharging at least 400 cm3 fluid per minute,

with a noise level limited to 6 dBA,

with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, and

working at ambient temperatures down to – 10 °C

consisting of aluminum alloys,

with a diameter of 38 mm or 50 mm,

with two concentric, annular grooves formed on its surface,

anodized,

driven by on-off single phase alternate current (AC) or brushless direct current (BLDC) variable speed motors

with a nominal power rating of not more than 1,5 kW

with an electric motor,

of an output of not more than 125 W

a length of 166 mm (+/– 1 mm),

a diameter of 70 mm (+/– 1 mm),

an internal capacity of 280 cm3 or more,

a water absorption rate of 17 g or more, and

an internal purity expressed by permissible amount of impurities of not more than 0,9 mg/dm2

a length of 291 mm (+/– 1 mm),

a diameter of 32 mm (+/– 1 mm),

a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm,

a solid particle diameter of not more than 0,06 mm

ultrafiltration system

carbon filtration system

water softener system

a single-phase AC motor,

an epicyclic gearing,

a cutter blade

a capacitor,

a part fitted with a threaded bolt

a voltage of 14,4 V or more but not more than 42 V,

an amperage of 10 A or more but not more than 42 A,

electrically heated,

with opening

with a multiplicity of tips (holes) of platinum/rhodium alloy

used to melt glass batches and condition molten glass

for drawing into continuous fibres

having interior surfaces of austenitic stainless steel, and

with a process capacity up to 15000 litres,

whether or not combined with a clean-in-process system and/or a dedicated paired media hold vessel

with a 16000 tonne pressure rating,

with a 1100mm diameter Bolster (± 1mm),

with a 1400mm main cylinder (± 1mm),

with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system,

with a double arm manipulator arrangement and connections for piping and electrical systems,

with a total weight 310 tonnes (± 10 tonnes), and

creating 30000 atmospheres at 1500 degrees centigrade using Low Frequency Alternating Current (16000 amps)

an opening pressure of not more than 800 kPa,

an external diameter not more than 37 mm

a solenoid pilot valve

a brass valve body including valve slider and copper connections

with an outside diameter of 28 mm or more but not more than 140 mm,

with an operational thermal stress of more than 150 °C at a working pressure of not more than 14 MPa,

with an internal diameter of 3 mm or more,

with an external diameter of not more than 100 mm,

with a width of not more than 40 mm,

whether or not equipped with a duster,

of precision-cast grey cast iron complying with standard DIN EN 1561,

with oil chambers,

without bearings,

with a diameter of 50 mm or more, but not more than 250 mm,

with a height of 40 mm or more, but not more than 150 mm,

whether or not with water chambers and connectors

a rated torque of 50 Nm or more but not more than 9000 Nm,

standard ratios of 1:50 or more but not more than 1:475,

lost motion of not more than one arc minute,

an efficiency of more than 80 %

a rated torque of 25 Nm or more, but not more than 70 Nm,

standard gear ratios of 1:12,7 or more, but not more than 1:64,3

not more than 3 gears,

an automatic deceleration system and

a power reversal system,

a length without axle of 24 mm (+/– 0,3),

a diameter of 49,3 mm (+/– 0,3)

a rated voltage of 220 V AC or more but not more than 240 V AC,

a rated frequency of 50 Hz or more but not more than 60 Hz,

an input power of not more than 4 W,

a rotation speed of 4rpm or more but not more than 4,8 rpm,

an output torque of not less than 10 kgf/cm

a DC motor with an output of 10 W or more but not more than 15 W,

an integrated gear mechanism,

a (pulling)force of 250 N or more at 160 °C elevated ambient temperature,

a (pulling) force of 250 N or more in each position of its stroke,

an effective stroke of 15 mm or more but not more than 20 mm,

with or without an on-board diagnostics interface

with a rotor speed of not more than 6500 rpm when not loaded;

with a rated voltage of 12,0 V (+/– 0,1);

of a specified temperature range of – 40 °C or more, but not more than + 165 °C;

with or without a connecting pinion;

with or without an engine connector

with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loaded

with a power supply voltage of 100 V or more but not more than 240 V

an angle of step of 7,5° (± 0,5°)

a two-phase winding,

a rated voltage of 9 V or more, but not more than 16,0 V

of a specified temperature range covering at least – 40 °C to + 105 °C

with or without connecting pinion

with or without motor drive connector

a multiple-phase winding

an external diameter of 28 mm or more but not more than 35 mm,

a rated speed of not more than 12000 rpm,

a power supply voltage of 8 V or more but not more than 27 V

an angle of step of 7,5o (± 0,5o),

a pull-out torque at 25 °C of 25 mNm or more,

a pull-out pulse rate of 1500 pps or more,

a two-phase winding, and

a rated voltage of 10,5 V or more, but not more than 16,0 V

an external diameter of 80 mm or more, but not more than 100 mm,

a supply voltage of 12 V,

an output at 20 °C of 300 W or more, but not more than 750 W,

a torque 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,

with or without the rotor angle position sensor of resolver type or Hall effect type,

an electronic control operating by Hall Effect position sensors,

a voltage input 9 V or more but not more than 16 V,

an external diameter of 70 mm or more but not more than 80 mm,

an output motor power 450 W or more but not more than 500 W,

a maximum output torque 50 Nm or more but not more than 52 Nm,

a maximum output rotation speed 280 rpm or more but not more than 300 rpm,

a coaxial male spline outputs with an outer diameter of 20 mm (± 1 mm), 17 teeth and a minimum length of the teeth of 25 mm (± 1 mm), and

a distance between root of splines of 119 mm (± 1 mm)

a specified speed of not more than 4000 rpm,

a minimum output of 400 W, but not more than 1,3 kW (at 12V),

a flange diameter of 90 mm or more, but not more than 150 mm,

a maximum length of 190 mm, measured from the beginning of the shaft to the outer ending,

a housing length of not more than 150 mm, measured from the flange to the outer ending,

a two-piece (basic housing including electric components and flange with minimum 2 and maximum 6 bore holes) aluminium diecast housing with a sealing compound (groove with an O-ring and grease),

a stator with single T-tooth design and single coil windings in 12/8 topology and

surface magnets

a multiple-phase winding,

an external diameter of 30 mm or more but not more than 80 mm,

a rated speed of not more than 15000 rpm,

an output of 45 W or more but not more than 300 W and

a supply voltage of 9 V or more but not more than 25 V

an external diameter of 90 mm or more, but not more than 110 mm,

a rated speed of not more than 3680 rpm,

an output of 600 W or more but not more than 740 W at 2300 rpm and at 80 °C,

a supply voltage of 12 V,

a torque of not more than 5,67 Nm,

a rotor position sensor,

an electronic star-point relay, and

for use with an electric power steering control module

an external diameter of 27,5 mm or more, but not more than 45 mm,

a rated speed of 11000 rpm or more, but not more than 23200 rpm,

a rated supply voltage of 3,6 V or more, but not more than 230 V,

an output power of not more than 529 W,

a free load current of not more than 3,1 A,

a maximum efficiency of 54 % or more,

a torque output of 200 Nm or more but not more than 300 Nm

a power output of 50 kW or more but not more than 100 kW

a rated speed of not more than 12500 rpm

an AC or DC motor whether or not with transmission,

power electronics

an output of 340 W or more but not more than 7,4 kW,

a flange of dimensions of not more than 180 mm × 180 mm, and

a length from flange to extreme end of resolver of not more than 271 mm

a Hydrogen generator (desulphurizer, reformer and cleaner)

a PEM fuel cell stack and

an Inverter

consisting of at least phosphoric acid fuel cells,

in a housing with integrated water management and gas treatment,

for permanent, stationary energy supply

an internal diameter of 206,6 mm (± 0,5)

an external diameter of 265,0 mm (± 0,2) and

a width of 41,00 mm (± 0,3)

with a capacity of 1 kVA or less

without plugs or cables,

with two output connectors

with two input connectors which are available and useable in parallel

able to switch between bright and dimmed operation mode

with an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or

with an input voltage of 230 V (+ 20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or

with an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode

with an input current reaching 80 % of its nominal value within 20 ms

with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions

with an maximum inrush current overshoot of not more than 250 % of the input current

with a period of the inrush current overshoot of not more than 100 ms

with an input current undershoot of not less than 50 % of the input current

with a period of the inrush current undershoot of not more than 20 ms

with a presettable output current

with an output current reaching 90 % of its nominal pre-set value within 50 ms

with an output current reaching zero within 30 ms after removal of the input voltage

with an defined failure status in case of no-load or too-high load (end-of-life function)

without housing or

with housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing

power transistors,

integrated circuits,

whether or not containing diodes and with or without thermistors,

an operating voltage of not more than 600 V,

not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and

a rms (root mean square) current rating of not more than 15,7 A

one or six 3-phase motor outputs with maximum 3 × 32 A,

a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DC

a logic power input of 24 V DC,

an EtherCat communication interface,

and a dimension of 150 × 140 × 120 mm or more, but not more than 335 × 430 × 179 mm

power transistors,

integrated circuits,

whether or not containing diodes and with or without thermistors,

a circuit configuration,

either containing a direct drive stage with an operating voltage of more than 600 V,

or containing a direct drive stage with an operating voltage of not more than 600 V and a rms current of more than 15,7 A,

or including one or more power factor correction modules

a rated power of not more than 100 W

an input voltage of 80 V or more, but not more than 305 V

an certified input frequency of 47 Hz or more, but not more than 440 Hz

one or more constant voltage output(s)

an operating temperature range of – 40 °C or more, but not more than + 85 °C,

pins for mounting to a printed circuit

a DC to DC converter

a charger of a capacity of not not more than 7 kW

switching functions

an inductance of 4,7 μΗ (± 20 %),

a DC resistance of not more than 0,1 Ohms,

an insulation resistance of 100 MOhms or more at 500 V (DC)

a power consumption of not more than 6 W,

an insulation resistance of more than 100 M ohms, and

an insert hole of 11,4 mm or more, but not more than 11,8 mm

being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and electric and electronic components,

having an ability to block the voltage - 6500 V — in both directions (conducting and the reverse direction)

a length of not more than 90 mm,

a width of not more than 90 mm and

a height of not more than 55 mm,

consisting of at least neodymium, praseodym, iron, boron, dysprosium, aluminium and cobalt,

with a width of 9,2 mm (– 0,1)

with a length of 20 mm (+ 0,1) or 30 mm (+ 0,1)

a length of 9 mm or more but not more than 105 mm,

a width of 5 mm or more but not more than 105 mm, and

a height of 2 mm or more but not more than 55 mm

a length of 15 mm or more but not more than 52 mm,

a width of 5 mm or more but not more than 42 mm,

a length of 30,4 mm (± 0,05 mm);

a width of 12,5 mm (± 0,15 mm);

a thickness of 6,9 mm (± 0,05 mm), or composed of ferrites in the shape of a quarter sleeves with:

a length of 46 mm (± 0,75 mm);

a width of 29,7 mm (± 0,2 mm),

a diameter of not more than 45 mm,

a height of not more than 45 mm,

whether or not containing a hole in the centre,

with a diameter of not more than 90 mm,

a plunger

a diameter of 12,9 mm (+/– 0,1),

a height without plunger of 20,5 mm (+/– 0,1),

an electric cable with connector, and

a diameter of 14,0 mm or more but not more than 26,0 mm,

a length of 2,2 mm or more but not more than 51 mm,

a voltage of 1,5 V or more, but not more than 3,6 V,

a capacity of 0,15 Ah or more, but not more than 5,00 Ah

a nominal capacity of not more 32 Ah,

a length of not more than 205 mm,

a width of not more than 130 mm and

a height of not more than 190 mm

a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge,

a liquid electrolyte,

a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,

a nominal voltage of 36 V or more, but not more than 48 V,

a power of 300 Wh or more, but not more than 648 Wh,

a rated voltage of 12 V,

a length of 350 mm or more but not more than 355 mm,

a width of 170 mm or more but not more than 180 mm,

a height of 180 mm or more but not more than 195 mm,

weighing 10 kg or more but not more than 15 kg

a nominal charge of 60 Ah or more, but not more than 80 Ah

a nominal capacity of 72 Ah or more, but not more than 100 Ah,

a nominal voltage of 3,2 V

a weight of 1,9 kg more, but not more than 3,4 kg

a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1mm)

a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)

a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1mm)

a weight of 45,9 kg or 46,3 kg

a rating of 75 Ah and

a nominal voltage of 60 V

a nominal capacity of 10 Ah or more, but not more than 20 Ah;

a nominal voltage of 12,8 V (± 0,05) or more, but not more than 15,2 V (± 0,05);

a power of 128 Wh or more, but not more than 256 Wh,

a length of 150 mm or more, but not more than 300 mm

a width of 700 mm or more, but not more than 1000 mm

a height of 1100 mm or more, but not more than 1500 mm

a weight of 75 kg or more, but not more than 160 kg

a nominal capacity not less than 150 Ah and not more than 500 Ah

a length of 1200 mm or more, but not more than 2000 mm

a width of 800 mm or more, but not more than 1300 mm

a height of 2000 mm or more, but not more than 2800 mm

a weight of 1800 kg or more, but not more than 3000 kg

a nominal capacity of 2800 Ah or more but not more than 7200 Ah

a thickness of not more than 4,15 mm,

a width of not more than 245,15 mm,

a length of not more than 90,15 mm,

a nominal capacity of 1000 mAh or more but not more than 10000 mAh,

a weight of not more than 250 g

a nominal capacity of 1060 mAh,

a nominal voltage of 7,4 V (average voltage at 0,2 C discharge),

a charging voltage of 8,4 V (± 0,05),

a length of 86,4 mm ((± 0,1),

a width of 45 mm (± 0,1),

a height of 11 mm (± 0,1),

a thickness of not more than 4,15 mm,

a width of not more than 75,15 mm,

a length of not more than 150,15 mm,

a nominal capacity of 1000 mAh or more but not more than 10000 mAh,

a weight of not more than 150 g,

a length of 298 mm or more, but not more than 408 mm,

a width of 33,5 mm or more, but not more than 209 mm,

a height of 138 mm or more, but not more than 228 mm,

a weight of 3,6 kg or more, but not more than 17 kg, and

a power of 458 Wh or more, but not more than 2158 Wh

a length of 1203 mm or more, but not more than 1297 mm,

a width of 282 mm or more, but not more than 772 mm,

a height of 792 mm or more, but not more than 839 mm,

a weight of 253 kg or more, but not more than 293 kg,

power of 22 kWh or 26 kWh, and

constituted of 24 or 48 modules

a base similar to an ellipse squeezed in the middle,

a length of 49 mm or more (not including terminals),

a width of 33,5 mm or more,

a thickness of 9,9 mm or more,

a rated capacity of 1,75 Ah or more, and

a rated voltage of 3,7 V,

some of the corners rounded off,

a length of 76 mm or more (not including terminals),

a width of 54,5 mm or more,

a thickness of 5,2 mm or more,

a rated capacity of 3100 mAh or more, and

a rated voltage of 3,7 V,

a length of 1213 mm or more, but not more than 1575 mm,

a width of 245 mm or more but not more than 1200 mm,

a height of 265 mm or more, but not more than 755 mm,

a weight of 265 kg or more but not more than 294 kg,

a nominal capacity of 66,6 Ah,

3,5 VDC to 3,8 VDC,

300 mAh to 900 mAh and

a diameter of 10,0 mm to 14,5 mm

a length of 700 mm or more, but not more than 2820 mm

a width of 935 mm or more, but not more than 1660 mm

a height of 85 mm or more, but not more than 700 mm

a weight of 250 kgor more, but not more than 700 kg

a power of not more than 175 kWh

a metal casing,

a length of 173 mm (± 0,15 mm),

a width of 21 mm (± 0,1 mm),

a height of 91 mm (± 0,15 mm),

a nominal voltage of 3,3 V and,

a nominal capacity of 21 Ah or more

a metal casing,

a length of 171 mm (± 3 mm),

a width of 45,5 mm (± 1 mm),

a height of 115 mm (± 1 mm),

a nominal voltage of 3,75 V and

a nominal capacity of 50 Ah

of a length of 312 mm or more, but not more than 350 mm

of a width of 79,8 mm or more, but not more than 225 mm

of a height of 35 mm or more, but not more than 168 mm

of a weight of 3,95 kg or more, but not more than 8,56 kg

with a rating of 66,6 Ah or more, but not more than 129 Ah

a width of 70 mm (± 5 mm),

a thickness of 0,4 mm (± 0,2 mm),

a length of not more than 55 mm,

are connected by wire or radio frequency to each other and the motor controller card, and

regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,

whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)

an igniter,

a coil on plug assembly with an integrated mounting bracket,

a housing,

a length of 90 mm or more but not more than 200 mm (+/– 5 mm),

an operating temperature of – 40 °C or more but not more than 130 °C,

a voltage of 10,5 V or more, but not more than 16 V

with a length of 50 mm or more, but not more than 200 mm,

with an operating temperature of – 40 °C or more, but not more than 140 °C, and

with a voltage of 9 V or more, but not more than 16 V,

with or without connection cable,

an operating temperature of more than 800 °C,

a voltage of 5 V or more, but not more than 16 V,

a heating rod containing silicon nitride (Si3N4) and molybdenum disilicide (MoSi2), and

a metal housing

two LEDs,

glass or plastic lenses, focusing/scattering the light emitted by the LEDs,

reflectors redirecting the light emitted by the LEDs,

a plastic holder with three or more brackets,

one or more 12 V bulbs,

a connector,

a plastic cover,

whether or not with a connection cable

coil,

magnet,

metal membrane,

connector,

holder

a printed circuit board,

a connector,

whether or not a metal holder

with two electrical contacts,

with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),

with a protective paper film on

a transformer with an input of not more than 240 V and an output of not more than 3000 W

an AC or DC fan motor with an output of not more than 42 watts

a housing made of stainless steel

with or without a magnetron of a microwave output power of not more than 900 W

fitted with a motor having a power rating of 8 W at 4600 rpm,

governed by an electronic circuit,

operating at ambient temperatures above 110 °C,

fitted with a thermoregulator

containing side and central openings,

of annealed aluminium,

with a ceramic coating, heat resistant to more than 200 °C

an impedance of 3 Ohm or more, but not more than 16 Ohm,

a nominal power of 2 W or more, but not more than 20 W,

with or without plastic bracket, and

with or without electric cable fitted with connectors,

of an impedance of 1,5 Ohm or more, but not more than 10 Ohm,

of a diameter of 25 mm or more but not more than 80 mm,

with frequency range of 150 Hz to 20 kHz,

with rated power of 5W or more, but not more than 40W,and

whether or not with electric cable with connector,

whether or not with a bracket

a steel coreplate, in the form of a disk on one side provided with a cylinder

a neodymium magnet

an upper plate

a lower plate

of steel,

perforated and

measuring 60,30 mm (+ 0,00 mm/– 0,40 mm) × 15,5 mm (+ 0,00 mm/– 0,40 mm) × 4,40 mm (± 0,05 mm)

an outside diameter of 25 mm or more but not more than 250 mm,

a resonance frequency of 20 Hz or more but not more than 150 Hz,

a total height of 5 mm or more but not more than 50 mm,

an edge thickness of 0,1 mm or more but not more than 3 mm

a speaker frame and magnet system holder with a protective coating and

an embossed anti-dust cloth

without a hard disk drive,

with or without a DVD-RW drive,

with either motion detection or capability of motion detection through IP connectivity via LAN connector

with or without a USB serial port,

a printed circuit,

a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,

not more than 3 connectors,

not more than 1 transistor,

not more than 3 variable and 4 fixed resistors,

not more than 5 capacitors,

a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,

a microprocessor capable of receiving remote control messages and controlling the tuner chipset,

a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,

a radio frequency (RF) remote control receiver,

an infrared remote control signal transmitter,

a SCART signal generator

a TV state sensor

laser diodes operating at three different wavelengths,

a photo detector integrated circuit and

an actuator,

an optical pick up unit with laser diodes operating at three different wavelengths,

a spindle motor,

a stepping motor

of a weight of not more than 5,9 kg,

without a housing,

of dimensions of not more than 405 mm × 315 mm,

with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor,

with effective pixels of not more than 5 megapixels,

with dimensions (without cable socket) of not more than 27 × 30 × 38,5 mm (width × height × length),

with three MOS imaging sensors with two or more effective megapixels per sensor and a prism block for distribution of the RGB spectrum colours to the three sensors,

with a C-Mount lens mount,

with a weight of not more than 70 g,

with an LVDS digital video output,

with a permanent EEPROM memory for local storage of calibration data for colour rendering and defective pixel compensation

a Dynamic- or Static overlay lines system,

an output NTSC video signal,

a voltage of 6,5 V or more,

an illuminance of 0,5 lux or more

an image sensor,

an objective (lens),

a colour processor,

a flexible printed circuit board or a printed circuit board,

whether or not capable of receiving audio signals,

a module dimension of not more than 15 mm × 15 mm × 15 mm,

a resolution of 2 mega pixel or more (16161232 pixels and higher),

whether or not wired, and

a housing

a sensitivity in the wavelength area of 7,5 μm or more, but not more than 17 μm,

a resolution of up to 640 × 512 pixels,

a weight of not more than 400 g,

measurements of not more than 70 mm × 86 mm × 82 mm,

whether or not in a housing

with automotive- qualified plug and

a deviation of the output signal over the entire work temperature range of not more than 20 %

an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,

a transformer and

a radio broadcast receiver

a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110 mm and equipped with a deflector yoke, and

a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,

without a housing, with back cover and mounting frame,

or with a housing,

excluding those combined with other apparatus,

comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,

with an applicable frequency range of 10 kHz or more but no more than 100 MHz

with a housing of ceramic plates provided with electrodes

a printed circuit

processors for multi-media applications and video signal processing

FPGA (Field Programmable Gate Array)

Flash memory

operating memory

HDMI, VGA, USB and RJ-45 interfaces

sockets and plugs for connecting a LCD-monitor, a LED lighting and a control panel

the generation of driving signals for pixel addressing, or

driving addressing pixels

solely consisting of one or more TFT glass or plastic cells,

not combined with touch screen facilities,

with one or more printed circuits boards with control electronics for pixel addressing only,

with or without backlight unit and

with or without inverters

one or more TFT glass or plastic cells,

a die cast heat sink,

a backlight unit,

one printed circuit board with micro controller, and

LVDS (Low Voltage Differential Signalling) interface,

a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,

a LED backlight,

a printed circuit board with EPROM, microcontroller, timing controller, LIN bus driver module and other active and passive components,

an 8 pin plug for power supply and 4- pin LVDS interface,

whether or not in a housing,

a diagonal measurement of the screen of 14,5 cm or more but not more than 20,3 cm,

or without a touch screen,

an LED backlight,

a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

a 12 pin plug for power supply and CAN and LVDS interfaces,

in a housing with monitor and other control functions,

silicon and magnesium,

with a length of 300 mm or more but not more than 2200 mm,

AC socket (for power cord connection) of 230 V,

integrated noise filter composed of capacitors and inductors,

cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

with backlight, micro-controller,

with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,

in a housing with or without a heat sink at the back of the housing,

without a signal-processing module,

the organic layer with organic LEDs,

two conductive layers on electron transfer and electron holes,

layers of transistors (TFT) with resolution of 1920 × 1080

anode and cathode for power supply of organic diodes,

RGB filter,

glass or plastic protective layer,

without the electronics for pixel addressing,

of an aluminium alloy containing silicon and magnesium,

with a length of 500 mm or more but not more than 2200 mm,

with a width of 300 mm or more but not more than 1500 mm,

with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,

without touch screen,

with a backlight and micro-controller,

with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,

without a signal processing module,

with control electronics for pixel addressing only,

with a motorised mechanism for moving the display screen,

consisting of an IGBT transistor chip and a diode chip on one or more lead frames,

for a voltage of 600 V or 1200 V

an electromechanical switching function,

a load current of 3 amperes or more but not exceeding 16 amperes,

a coil voltage of 5 volts or more but not exceeding 24 volts,

a distance between the connector pins of the load circuit not more than 12,5 mm

a nominal voltage of 12 V DC

an allowable voltage of not more than 16 V DC

a coil resistance at 20 °C of 26, 7 Ohm (± 10 %)

a pick-up voltage at 60 °C of not more than 8,5 V

a drop-out voltage at 20 °C of 1 V or more

a nominal operating power at 20 °C of 5,4 Watts

a switching voltage of not more than 400 V DC

a permanent current-carrying capacity of not more than 120 A

printed circuit board,

LED diode,

connector,

brackets for mounting

a voltage of 240 V or more but not more than 250 V,

an amperage of 4 A or more but not more than 6 A,

a voltage of 240 V or more but not more than 300 V,

an amperage of 3 A or more but not more than 15 A,

a pulse transformer, including a wide-band ferrite core,

a common mode coil,

a resistor,

a capacitor,

of copper

plated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken together

with a thickness of the plating of 0,3 mm (– 0/+ 0,015 mm)

microprocessor relays,

a stepper motor,

Electrically Erasable Programmable Read-Only (EEPROM) memory, and

other passive components (such as connectors, diodes, voltage stabilizer, resistors, capacitors, transistors),

sockets with or without fuses,

connecting ports,

a printed circuit board with embedded microprocessor, micro switch and relay

an AC power input of 208 V or more but not more than 400 V,

a logic power input of 24 V DC,

an automatic circuit breaker,

a main power switch,

internal or external electrical connectors and cables,

in a housing with dimension of 281 mm × 180 mm × 75 mm or more, but not more than 630 mm × 420 mm × 230 mm,

one or more integrated circuits, not interconnected, on separate lead frames,

also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars

mounted in a plastic housing

2 rotary knobs

27 or more pushbuttons

LED lights

2 integrated circuits for receiving and sending of control signals via the LIN-bus

a length of 50 mm or more, but not more than 120 mm,

a width of 20 mm or more but not more than 40 mm,

a height of 30 mm or more, but not more than 120 mm

plastic box with printed circuit board and metal holder,

with voltage of 9 V or more, but not more than 16 V,

able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder

a microprocessor,

light-emitting diode (LED) or liquid crystal display (LCD) indicators,

electronic components mounted on a printed circuit,

an antenna module in a plastic housing,

a connection cable with a plug,

at least two mounting brackets

whether or not PCB including integrated circuits, diodes and transistors

a mains power/CAN (Controller area network) output socket,

a universal serial bus (USB) and audio IN/OUT ports and

incorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),

a voltage of not more than 60 V,

a current of not more than 1 A,

a heat resistance of not more than 105 °C,

individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),

a distance between conductors of not more than 0,5 mm and

a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm

a coaxial cable,

two or more connectors,

3 or more plastic clips for attachment to the dashboard

a travel speed of not more than 24 km/h

a motor speed of not more than 4500 rpm

hydraulic pressure of not more than 25 Mpa

mass of not more than 50 metric tonnes

with an operation voltage of 12 V,

wrapped in tape and covered in plastic convoluted tubing,

with 16 or more strand, with all terminals to be tin plated or equipped with connectors,

of a voltage of 5 V or more but not more than 90 V,

capable of transmitting information

a rubber grommet,

a plastic conduit,

a metal attachment bracket

a voltage of 1,25 V (± 0,25 V)

connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,

outer screening shielding,

10 or 80 individual wires,

a length of 50 mm or more, but not more than 800 mm,

connector(s) and/or plug(s) fitted at one or both ends,

of a voltage of not more than 80 V,

with a length of not more than 120 cm,

fitted with connectors,

with individual conductor wires of a diameter exceeding 0,51 mm.,

for a voltage of not more than 1000 V,

of a voltage of not more than 80 V,

of a platinum-iridium-alloy,

coated with poly(tetrafluoroethylene),

without connectors,

a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm

an optical lens

a Recording Photodetector Integrated Circuit (PDIC)

a focussing and tracking actuator

solely consisting of one or more TFT glass or plastic cells,

combined with touch screen facilities,

with one or more printed circuits boards with control electronics for pixel addressing only,

with or without backlight unit and

with or without inverters

with a rating of 13.5 V (± 0,5 V) and

a ball screw mechanism to control brake fluid pressure in the master cylinder

a piston,

brake pads,

a gasket, and

a venting valve

operating within the service brake disk,

with a diameter of 170 mm or more but not more than 195 mm

one exterior-splined output shaft,

two interior-splined, coaxial output shafts,

a rotary switch to indicate gear position, and

the potential for a differential to be incorporated between the 2 coaxial output shafts,

of a length of 1 m or more but not more than 2 m,

of a weight of 6 kg or more but not more than 9 kg

two electro-magnetic one direction clutches, working in opposite sides,

an input shaft with an outer diameter of 24 mm (+/– 1 mm), ended with 22 teeth spline, and

a coaxial output bushing with an inner diameter of 22 mm (+/– 1 mm), ended with 22 teeth spline

a metal holder with three mounting screws, and

a rubber bump

an insulating area flatness of not more than 0,1 mm,

a permissible particle quantity of 0,3 mg per tank,

a distance between pores of 2 mm or more,

pore sizes of not more than 0,4 mm, and

not more than 3 pores larger than 0,2 mm

designed to be bolted onto a splined shaft of outer diameter 23 mm,

with an overall diameter of not more than 266 mm (± 1 mm),

comprised of 2 sheaves with tapered faces,

sheaves having taper of 13 degrees each,

having a main compression spring used to resist displacement between sheaves, and

comprised of a cam or spring to maintain proper belt tension

elements that activate the clutch at given rotation and generate (in this way) centrifugal force,

shaft ended with five degree taper,

three weights, and

one compression spring

sewn

folded into three-dimensional packing form, fixed by thermal forming

sewn,

folded,

with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing

suitable for cool inflator technology

a metal housing with at least six mounting brackets,

an embedded safety cushion,

a cartridge filled with compressed gas

a fuel inlet,

a pump flange assembly (PFA),

a ventilation with rollover valve mounted on the top of the tank, and

threated holes for PFA assembly,

of SAE1541 carbon steel

with a hard chromium layer of 20 μm (+ 15 μm/– 5 μm)

having a wall thickness of 1,45 mm or more, but not more than 1,5 mm

having an elongation at break of 15 %

perforated

of 7050-t73 aluminium alloy,

anodised on the inner surface,

with a mean roughness (Ra) of the inner surface of not more than 0,4 and

a maximum roughness height (Rt) of the inner surface of not more than 4,0

a poly(methyl methacrylate) core,

a cladding of fluorinated polymer,

a diameter of not more than 3,0 mm, and

a length of more than 150 m,

uncoated and unpainted,

of a length of 30 mm or more, but not more than 234,5 mm,

of a width of 7 mm or more, but not more than 28 mm, and

of a height of 0,5 mm or more, but not more than 3 mm

of a diameter of 4,9 cm or more but not more than 8,2 cm,

of a height of 0,5 cm or more but not more than 1,8 cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface centre

whether or not cut,

whether or not printed,

using wavelengths of 3 μm or more but not more than 5 μm,

providing a clear picture from 50 m to infinity,

with fields of vision sizes of 3° × 2,25° and 9° × 6,75°,

with a weight of not more than 230 g,

with a length of not more than 88 mm,

with a diameter of not more than 46 mm,

athermalised,

measuring not more than 80 mm × 55 mm × 50 mm,

with a resolution of 160 lines/mm or better, and

with a zoom ratio of 18 times,

a monocrystalline silicon lens with a diameter of 84 mm (± 0,1 mm) and

a monocrystalline germanium lens with a diameter of 62 mm (± 0,05 mm)

measuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,

with a resolution of 130 lines/mm or better, and

with a zoom ratio of 18 times

a silicon lens with a diameter of 29 mm (± 0,05 mm) and

a monocrystalline calcium fluoride lens with a diameter of 26 mm (± 0,05 mm),

measuring not more than 125 mm × 65 mm × 65 mm,

with a resolution of 125 lines/mm or better, and

with a zoom ratio of 16 times

with a silicon lens of a diameter of 62 mm (± 0,05 mm),

mounted on a machined aluminum alloy support

having a focal length of 25 mm or more but not more than 150 mm,

consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm

a germanium lens with a diameter of 11 mm (± 0,05 mm),

a monocrystalline calcium fluoride lens with a diameter of 14 mm (± 0,05 mm), and

a silicon lens with a diameter of 17 mm (± 0,05 mm),

with a silicon lens with a diameter of 26 mm (± 0,1 mm),

mounted on a machined aluminum alloy support,

measuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,

with an etendue of 7 steradian mm2 or better, and

with a zoom ratio of 16 times

a germanium lens with a diameter of 19 mm (± 0,05 mm),

a monocrystalline calcium fluoride lens with a diameter of 18 mm (± 0,05 mm),

a germanium lens with a diameter of 20,6 mm (± 0,05 mm),

a field of view range of 58,5 deg or more, but not more than 194 deg,

a focal length of 1,16 mm or more, but not more than 3,88 mm,

a relative aperture of F/2.0 or more but not more than 2.6,

a diameter of 17 mm or more but not more than 18,5 mm,

one or more monolithic application-specific integrated circuits (ASIC),

one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

a combination of one or more application-specific integrated circuits (ASIC) and

one or more micro-electromechanical sensors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,

a combination of one or more monolithic application-specific integrated circuits (ASIC) and

at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,

in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:

one or more monolithic application-specific integrated circuits (ASIC),

one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,

speed,

engine revolutions,

engine temperature,

the fuel level

an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals

four pressure transducers,

two or more pressure valves,

electric interfaces and

several connectors for gas lines

suitable for in-situ plasma bonding processes or for multi frequency bond activating processes

an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, and

a flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor

Versions

2016-12-19