Council Regulation (EU) 2017/2467 of 21 December 2017 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Grade B
mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.
Address https://gelex.eu/eli/EU/regulation/2017/2467@2017-12-21/en
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1) The Union production of 67 products that are not listed in the Annex to Council Regulation (EU) No 1387/2013 is not sufficient to cover the needs of the Union industry. It is therefore in the interest of the Union to suspend the autonomous Common Customs Tariff (CCT) duties on those products.
(2) It is necessary to modify the conditions for the suspension of autonomous CCT duties for 49 products listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends on the market. Certain product classifications have been amended in order to allow industry to fully benefit from the suspensions in force. Moreover, the Annex to Regulation (EU) No 1387/2013 should be updated in order to align or clarify texts in some cases. The modified conditions relate to changes in the product description, classification, duty rates or end-use requirements.
(3) The end dates for the mandatory review provided for in the Annex to Regulation (EU) No 1387/2013 should be revised for 188 suspensions.
(4) It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for 92 products listed in the Annex to Regulation (EU) No 1387/2013. Suspensions for those products should therefore be deleted from that Annex.
(5) In the interests of clarity, the entries for the suspensions that are modified or newly introduced by this Regulation should be marked with an asterisk, whereas the asterisk should be removed from the entries for the suspensions that are not modified by this Regulation.
(6) Regulation (EU) No 1387/2013 should therefore be amended accordingly.
(7) In order to avoid any interruption of the application of the autonomous suspension scheme and to comply with the guidelines set out in the Communication from the Commission concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the suspensions for the products concerned have to apply from 1 January 2018. This Regulation should therefore enter into force as a matter of urgency,
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Regulation (EU) No 1387/2013 is amended as follows:
(1) in the table, the rows for the products for which the CN and TARIC codes are set out in Annex I to this Regulation are deleted;
(2) all asterisks in the table and endnote (*), containing the text A newly introduced measure or a measure with amended conditions., are deleted;
(3) the rows for the products listed in Annex II to this Regulation are inserted into the table according to the order of the CN codes indicated in the first column of that table.
Article 2
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2018.
This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 21 December 2017. For the Council The President M. Maasikas
ANNEX
ANNEX I
In the table set out in the Annex to Regulation (EU) No 1387/2013, the rows relating to suspensions for the products identified by the following CN and TARIC codes are deleted: CN code TARIC ex15119019 20 ex15119091 20 ex15131110 20 ex15131930 20 ex15132110 20 ex15132930 20 ex20079950 81 ex20079950 82 ex20079950 83 ex20079950 84 ex20079950 85 ex20079950 91 ex20079950 92 ex20079950 93 ex20079950 94 ex20079950 95 ex20079993 10 ex20089391 20 ex20089949 70 ex20089999 11 ex28045090 10 ex28051990 20 ex28111980 30 ex28112200 70 ex28164000 10 ex28230000 10 ex28230000 20 ex28251000 10 ex28256000 10 ex28351000 10 ex28372000 20 ex28391900 10 ex28418000 10 ex28419085 10 ex28500020 30 ex28500020 50 29033931 ex29033935 10 ex29038980 50 ex29049900 40 ex29051900 70 ex29051900 80 ex29053995 20 ex29053995 40 ex29062900 30 ex29072900 55 ex29089900 40 ex29096000 40 ex29122900 50 ex29124900 20 ex29141990 20 ex29141990 30 ex29141990 40 ex29143900 30 ex29143900 70 ex29143900 80 ex29145000 45 ex29145000 60 ex29145000 70 ex29147900 20 ex29156019 10 ex29159070 30 ex29159070 75 ex29161200 70 ex29161300 10 ex29163990 55 ex29163990 75 ex29163990 85 ex29171910 20 ex29173995 70 ex29182900 35 ex29183000 50 ex29189990 15 ex29202900 50 ex29202900 60 ex29209010 60 ex29209070 40 ex29209070 50 29211300 ex29211999 70 ex29213099 40 ex29214200 86 ex29214200 87 ex29214200 88 ex29214300 80 ex29214900 85 ex29215990 30 ex29215990 60 ex29221900 20 ex29221900 25 ex29224985 20 ex29224985 60 ex29241900 80 ex29242970 51 ex29242970 53 ex29242970 86 ex29242970 87 ex29251995 20 ex29251995 30 ex29270000 80 ex29280090 60 ex29291000 20 ex29291000 55 ex29291000 80 ex29302000 10 ex29309098 65 ex29309098 66 ex29309098 68 ex29309098 83 ex29313990 08 ex29313990 25 ex29321400 10 ex29322090 20 ex29322090 40 ex29329900 25 ex29329900 80 ex29331990 80 ex29331990 85 ex29332990 80 ex29333999 12 ex29333999 18 ex29333999 50 ex29333999 57 ex29334910 30 ex29334990 25 ex29335995 77 ex29335995 88 ex29337900 30 ex29339980 18 ex29339980 24 ex29339980 28 ex29339980 43 ex29339980 47 ex29339980 51 ex29341000 15 ex29341000 25 ex29341000 35 ex29342080 40 ex29343090 10 ex29349990 14 ex29349990 18 ex29349990 22 ex29349990 35 ex29349990 37 ex29349990 38 ex29349990 74 ex29359090 73 ex29400000 40 ex32041100 30 ex32041100 70 ex32041100 80 ex32041200 20 ex32041200 30 ex32041300 20 ex32041300 30 ex32041300 40 ex32041700 12 ex32041700 60 ex32041700 75 ex32041700 80 ex32041700 85 ex32041700 88 ex32041900 52 ex32041900 84 ex32041900 85 ex32050000 20 ex32074085 40 ex32089019 25 ex32089019 35 ex32089019 75 ex32089091 20 ex32151190 10 ex32151990 10 ex32151990 20 ex34021300 20 ex37079029 50 ex38029000 11 ex38089190 60 ex38089315 10 ex38112100 30 ex38112100 50 ex38112100 60 ex38112100 70 ex38112100 85 ex38112900 20 ex38112900 30 ex38112900 40 ex38112900 50 ex38112900 55 ex38119000 40 ex38123990 80 ex38151990 87 ex38159090 16 ex38159090 18 ex38159090 71 ex38159090 85 ex38249992 22 ex38249992 35 ex38249992 39 ex38249992 44 ex38249992 47 ex38249992 48 ex38249992 49 ex38249992 50 ex38249992 80 ex38249992 83 ex38249992 86 ex38249993 57 ex38249993 63 ex38249993 77 ex38249993 83 ex38249993 88 ex38249996 50 ex38249996 79 ex38249996 85 ex38249996 87 ex39021000 10 ex39021000 50 ex39039090 15 ex39046980 85 ex39053000 10 ex39059100 30 ex39069090 27 ex39072020 20 ex39073000 60 ex39076900 50 ex39079980 25 ex39079980 60 ex39079980 70 ex39089000 60 ex39094000 30 ex39100000 50 ex39119019 30 ex39119099 53 ex39119099 57 ex39191080 40 ex39191080 45 ex39191080 47 ex39191080 53 ex39191080 55 ex39199080 25 ex39199080 32 ex39199080 34 ex39199080 36 ex39199080 38 ex39199080 40 ex39199080 42 ex39199080 43 ex39199080 44 ex39199080 45 ex39199080 47 ex39199080 53 ex39199080 60 ex39201028 93 ex39201040 30 ex39201089 50 ex39202029 55 ex39202029 94 ex39202080 93 ex39202080 95 ex39204910 95 ex39206219 60 ex39209928 55 ex39211310 20 ex39219060 95 ex39269092 40 ex39269097 20 ex39269097 77 ex41044119 10 ex54071000 10 ex56031110 20 ex56031190 20 ex56031290 50 ex69091900 15 ex70051030 10 ex70091000 50 ex70191200 05 ex70191200 25 ex70191910 15 ex70191910 50 ex74091900 10 ex74102100 70 ex76012020 10 ex76072090 10 ex76169990 75 ex81021000 10 ex81059000 10 ex81082000 50 ex81089030 20 ex81089050 10 ex81089050 15 ex81089050 30 ex81089050 35 ex81089050 50 ex81089050 60 ex81089050 75 ex81130090 10 ex82073010 10 ex84073320 10 ex84073380 10 ex84079080 10 ex84079090 10 ex84089043 40 ex84089045 30 ex84089047 50 ex84099100 20 ex84099100 30 ex84099900 50 ex84119900 60 ex84119900 65 ex84145925 30 ex84159000 50 ex84312000 30 ex84818069 60 ex84821010 30 ex84821090 20 ex84833038 40 ex85011099 60 ex85013100 25 ex85013100 33 ex85013100 35 ex85013200 70 ex85016200 30 ex85030099 40 ex85043180 20 ex85043180 40 ex85044082 40 ex85045095 50 ex85051100 35 ex85051100 50 ex85051100 60 ex85069000 10 ex85076000 25 ex85076000 50 ex85076000 53 ex85076000 55 ex85076000 57 ex85113000 50 ex85129090 10 ex85169000 70 ex85182995 30 ex85229080 15 ex85229080 96 ex85258019 45 ex85299065 75 ex85299092 70 ex85366990 51 ex85366990 81 ex85366990 88 ex85369095 30 ex85371091 30 ex85371098 92 ex85442000 20 ex85443000 35 ex85443000 80 ex85444290 30 ex85444290 60 ex85481029 10 ex85489090 50 ex87042391 20 ex87084020 10 ex87084050 20 ex87085020 30 ex87085099 20 ex87089310 20 ex87089390 20 ex87089910 20 ex87089997 70 ex90012000 10 ex90012000 40 ex90015041 30 ex90015049 30 ex90019000 25 ex90019000 60 ex90019000 75 ex90021100 20 ex90021100 30 ex90021100 40 ex90021100 70 ex90021100 80 ex90029000 40 ex90328900 40
ANNEX II *
In the table set out in the Annex to Regulation (EU) No 1387/2013, the following rows are inserted according to the order of the CN codes indicated in the first column of that table: A newly introduced measure or a measure with amended conditions. CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review *ex15119019 *ex15119091 *ex15131110 *ex15131930 *ex15132110 *ex15132930 20 20 20 20 20 20 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: 0 % — 31.12.2018 *ex20079950 *ex20079950 *ex20079993 83 93 10 Mango puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 6 % — 31.12.2022 *ex20079950 *ex20079950 84 94 Papaya puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 7,8 % — 31.12.2022 *ex20079950 *ex20079950 85 95 Guava puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 6 % — 31.12.2022 *ex20089391 20 Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries 0 % — 31.12.2022 *ex20089949 *ex20089999 70 11 Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: for use in the manufacture of stuffed vine leaves with rice 0 % — 31.12.2022 *ex21069092 50 Casein protein hydrolysate consisting of: 0 % kg 31.12.2022 *ex28045090 40 Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis 0 % — 31.12.2018 *ex28051990 20 Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more 0 % — 31.12.2022 *ex28112200 15 Amorphous silicon dioxide (CAS RN 60676-86-0), 0 % — 31.12.2020 *ex28112990 10 Tellurium dioxide (CAS RN 7446-07-3) 0 % — 31.12.2022 *ex28164000 10 Barium hydroxide (CAS RN 17194-00-2) 0 % — 31.12.2022 *ex28230000 10 Titanium dioxide (CAS RN 13463-67-7): 0 % — 31.12.2022 *ex28251000 10 Hydroxylammonium chloride (CAS RN 5470-11-1) 0 % — 31.12.2022 *ex28256000 10 Zirconium dioxide (CAS RN 1314-23-4) 0 % — 31.12.2022 *ex28351000 10 Sodium hypophosphite monohydrate (CAS RN 10039-56-2) 0 % — 31.12.2022 *ex28372000 20 Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5) 0 % — 31.12.2022 *ex28391900 10 Disodium disilicate (CAS RN 13870-28-5) 0 % — 31.12.2022 *ex28415000 10 Potassium dichromate (CAS RN 7778-50-9) 0 % — 31.12.2022 *ex28418000 10 Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5) 0 % — 31.12.2022 *ex28419030 10 Potassium metavanadate (CAS RN 13769-43-2) 0 % kg 31.12.2022 *ex28419085 10 Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 % 0 % — 31.12.2022 *ex28500020 30 Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm 0 % — 31.12.2022 *ex28500020 60 Disilane (CAS RN 1590-87-0) 0 % — 31.12.2022 *ex29033919 20 5-Bromopent-1-ene (CAS RN 1119-51-3) 0 % — 31.12.2022 *29033931 2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1) 0 % — 31.12.2022 *ex29033935 20 Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9) 0 % — 31.12.2018 *ex29033939 40 1,1,2,3,4,4-hexafluorobuta-1,3-diene (CAS RN 685-63-2) 0 % — 31.12.2022 *ex29038980 50 Chlorocyclopentane (CAS RN 930-28-9) 0 % — 31.12.2022 *ex29038980 60 Octafluorocyclobutane (CAS RN 115-25-3) 0 % — 31.12.2022 *ex29049900 40 4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2) 0 % — 31.12.2022 *ex29051900 70 Titanium tetrabutanolate (CAS RN 5593-70-4) 0 % — 31.12.2022 *ex29051900 80 Titanium tetraisopropoxide (CAS RN 546-68-9) 0 % — 31.12.2022 *ex29053995 20 Butane-1,2-diol (CAS RN 584-03-2) 0 % — 31.12.2022 *ex29053995 40 Decane-1,10-diol (CAS RN 112-47-0) 0 % — 31.12.2022 *ex29062900 30 2-Phenylethanol (CAS RN 60-12-8) 0 % — 31.12.2022 *ex29089900 40 4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4) 0 % — 31.12.2018 *ex29122900 35 Cinnamaldehyde (CAS RN 104-55-2) 0 % kg 31.12.2022 *ex29122900 50 4-Isobutylbenzaldehyde (CAS RN 40150-98-9) 0 % — 31.12.2018 *ex29124900 20 4-Hydroxybenzaldehyde (CAS RN 123-08-0) 0 % — 31.12.2022 *ex29141990 20 Heptan-2-one (CAS RN 110-43-0) 0 % — 31.12.2022 *ex29141990 30 3-Methylbutanone (CAS RN 563-80-4) 0 % — 31.12.2022 *ex29141990 40 Pentan-2-one (CAS RN 107-87-9) 0 % — 31.12.2022 *ex29143900 30 Benzophenone (CAS RN 119-61-9) 0 % — 31.12.2022 *ex29143900 70 Benzil (CAS RN 134-81-6) 0 % — 31.12.2022 *ex29143900 80 4′-Methylacetophenone (CAS RN 122-00-9) 0 % — 31.12.2022 *ex29145000 45 3,4-Dihydroxybenzophenone (CAS RN 10425-11-3) 0 % — 31.12.2022 *ex29145000 60 2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8) 0 % — 31.12.2022 *ex29147900 20 2,4′-Difluorobenzophenone (CAS RN 342-25-6) 0 % — 31.12.2022 *ex29156019 10 Ethyl butyrate (CAS RN 105-54-4) 0 % — 31.12.2022 *ex29159070 30 3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) 0 % — 31.12.2022 *ex29161200 70 2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3) 0 % — 31.12.2022 *ex29161300 30 Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities 0 % — 31.12.2020 *ex29163990 55 4-tert-Butylbenzoic acid (CAS RN 98-73-7) 0 % — 31.12.2022 *ex29163990 75 m-Toluic acid (CAS RN 99-04-7) 0 % — 31.12.2022 *ex29163990 85 (2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0) 0 % — 31.12.2022 *ex29171910 20 Diethyl malonate (CAS RN 105-53-3) 0 % — 31.12.2022 *ex29182900 35 Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9) 0 % — 31.12.2022 *ex29183000 50 Ethyl acetoacetate (CAS RN 141-97-9) 0 % — 31.12.2022 *ex29189990 15 Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8) 0 % — 31.12.2022 *ex29189990 27 Ethyl 3-ethoxypropionate (CAS RN 763-69-9) 0 % — 31.12.2022 *ex29202900 15 Phosphorous acid 3,3′,5,5′-tetrakis(1,1-dimethylethyl)-6,6′-dimethyl[1,1′-biphenyl]-2,2′-diyl tetra-1-naphthalenyl ester (CAS RN 198979-98-5) 0 % — 31.12.2022 *ex29202900 50 Fosetyl-aluminium (CAS RN 39148-24-8) 0 % — 31.12.2018 *ex29202900 60 Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides 0 % — 31.12.2021 *ex29209010 60 2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) 0 % — 31.12.2022 *29211300 2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9) 0 % — 31.12.2022 *ex29211999 70 N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8) 0 % — 31.12.2022 *ex29213099 40 Cyclopropylamine (CAS RN 765-30-0) 0 % — 31.12.2022 *ex29214200 86 2,5-Dichloroaniline (CAS RN 95-82-9) 0 % — 31.12.2022 *ex29214200 87 N-Methylaniline (CAS RN 100-61-8) 0 % — 31.12.2022 *ex29214200 88 3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0) 0 % — 31.12.2022 *ex29214300 80 6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) 0 % — 31.12.2018 *ex29214500 60 1-Naphthylamine (CAS RN 134-32-7) 0 % — 31.12.2022 *ex29214500 70 8-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8) 0 % — 31.12.2022 *ex29215990 30 3,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) 0 % — 31.12.2022 *ex29215990 60 (2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8) 0 % — 31.12.2022 *ex29221900 20 2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9) 0 % — 31.12.2022 *ex29224985 20 3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0) 0 % — 31.12.2022 *ex29224985 60 Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3) 0 % — 31.12.2022 *ex29224985 75 L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1) 0 % — 31.12.2022 *ex29225000 15 3,5-Diiodothyronine (CAS RN 1041-01-6) 0 % — 31.12.2022 *ex29241900 25 Isobutylidenediurea (CAS RN 6104-30-9) 0 % — 31.12.2022 *ex29241900 80 Tetrabutylurea (CAS RN 4559-86-8) 0 % — 31.12.2022 *ex29242970 53 4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) 0 % — 31.12.2022 *ex29242970 86 Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more 0 % — 31.12.2022 *ex29251995 20 4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9) 0 % — 31.12.2022 *ex29251995 30 N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7) 0 % — 31.12.2022 *ex29270000 80 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7) 0 % — 31.12.2022 *ex29291000 20 Butyl isocyanate (CAS RN 111-36-4) 0 % — 31.12.2022 *ex29291000 55 2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) 0 % — 31.12.2022 *ex29291000 80 1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) 0 % — 31.12.2022 *ex29302000 10 Prosulfocarb (ISO) (CAS RN 52888-80-9) 0 % — 31.12.2022 *ex29309098 65 Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7) 0 % — 31.12.2022 *ex29309098 68 Clethodim (ISO) (CAS RN 99129-21-2) 0 % — 31.12.2022 *ex29313990 08 Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution 0 % — 31.12.2022 *ex29313990 25 (Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) 0 % — 31.12.2022 *ex29319000 20 Ferrocene (CAS RN 102-54-5) 0 % — 31.12.2022 *ex29321400 10 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2) 0 % — 31.12.2019 *ex29322090 40 (S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9) 0 % — 31.12.2022 *ex29322090 50 L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5) 0 % t 31.12.2022 *ex29329900 25 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) 0 % — 31.12.2022 *ex29329900 80 1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0) 0 % — 31.12.2018 *ex29331990 80 3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5) 0 % — 31.12.2022 *ex29332990 80 Imazalil (ISO) (CAS RN 35554-44-0) 0 % — 31.12.2022 *ex29333999 12 2,3-Dichloropyridine (CAS RN 2402-77-9) 0 % — 31.12.2022 *ex29333999 36 1-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6) 0 % — 31.12.2022 *ex29333999 57 Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) 0 % — 31.12.2022 *ex29334910 30 Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6) 0 % — 31.12.2022 *ex29334990 25 Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2) 0 % — 31.12.2021 *ex29335995 77 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6) 0 % — 31.12.2022 *ex29337900 30 5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0) 0 % — 31.12.2022 *ex29339980 24 1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3) 0 % — 31.12.2022 *ex29339980 41 5-[4′-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2) 0 % — 31.12.2022 *ex29339980 46 (S)-indoline-2-carboxylic acid (CAS RN 79815-20-6) 0 % — 31.12.2022 *ex29339980 47 Paclobutrazol (ISO) (CAS RN 76738-62-0) 0 % — 31.12.2022 *ex29339980 51 Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides 0 % — 31.12.2021 *ex29341000 15 4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3) 0 % — 31.12.2022 *ex29341000 25 (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3) 0 % — 31.12.2022 *ex29341000 35 (2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8) 0 % — 31.12.2022 *ex29342080 15 Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7) 0 % kg 31.12.2022 *ex29342080 40 1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5) 0 % — 31.12.2022 *ex29343090 10 2-Methylthiophenothiazine (CAS RN 7643-08-5) 0 % — 31.12.2022 *ex29349990 37 4-Propan-2-ylmorpholine (CAS RN 1004-14-4) 0 % — 31.12.2022 *ex29349990 52 Epoxiconazole (ISO) (CAS RN 133855-98-8) 0 % — 31.12.2022 *ex29349990 54 2-benzyl-2-dimethylamino-4′-morpholinobutyrophenone (CAS RN 119313-12-1) 0 % kg 31.12.2022 *ex29349990 56 1-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1) 0 % — 31.12.2022 *ex29349990 57 (6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 120709-09-3) 0 % — 31.12.2022 *ex29349990 58 Dimethenamide-P (CAS RN 163515-14-8) 0 % — 31.12.2018 *ex29349990 74 2-Isopropylthioxanthone (CAS RN 5495-84-1) 0 % — 31.12.2022 *ex29359090 73 (2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) 0 % — 31.12.2022 *ex29389090 30 Rebaudioside A (CAS RN 58543-16-1) 0 % — 31.12.2022 *ex29389090 40 Purified steviol glycoside with a rebaudioside M (CAS RN 1220616-44-3) content of 80 % or more but not more than 90 % by weight for use in the manufacture of non-alcoholic beverages 0 % — 31.12.2022 *ex32041100 35 Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with a colourant C.I Disperse Yellow 232 content of 50 % or more 0 % — 31.12.2022 *ex32041100 45 Preparation of dispersion dyes, containing: 0 % — 31.12.2020 *ex32041300 30 Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight 0 % — 31.12.2018 *ex32041300 40 Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight 0 % — 31.12.2022 *ex32041500 80 Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight 0 % — 31.12.2022 *ex32041700 26 Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight 0 % — 31.12.2022 *ex32041700 75 Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight 0 % — 31.12.2022 *ex32041700 80 Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight 0 % — 31.12.2022 *ex32041700 85 Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight 0 % — 31.12.2022 *ex32041700 88 Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight 0 % — 31.12.2022 *ex32041900 16 Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon with a colourant C.I. Solvent Yellow 133 content of 97 % or more by weight 0 % — 31.12.2022 *ex32041900 84 Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight 0 % — 31.12.2022 *ex32049000 20 Preparations of colourant C.I. Solvent Red 175 (CAS RN 68411-78-6) in petroleum distillates, hydrotreated light naphthenic (CAS RN 64742-53-6), containing by weight 40 % or more but not more than 60 % C.I. Solvent Red 175 0 % — 31.12.2022 *ex32064970 30 Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a colourant C.I. Pigment Black 12 content of 50 % or more by weight 0 % — 31.12.2022 *ex32074085 40 Glass flakes (CAS RN 65997-17-3): 0 % — 31.12.2022 *ex32089019 *ex32089091 25 20 Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight 0 % — 31.12.2022 *ex32089019 65 Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants 0 % — 31.12.2018 *ex32089019 75 Acenaphthalene copolymer in ethyl lactate solution 0 % — 31.12.2022 *ex32151100 *ex32151900 10 10 Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments 0 % — 31.12.2018 *ex32151900 20 Ink: for use in the manufacture of electrodes 0 % l 31.12.2022 *ex34021300 20 Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated 0 % — 31.12.2022 *ex35069190 60 Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 65 % or more but not more than 75 % 0 % l 31.12.2022 *ex35069190 70 Temporary wafer-bonding release in form of a suspension of a solid polymer in cyclopentanone (CAS RN 120-92-3) with a polymeric content of not more than 10 % by weight 0 % l 31.12.2022 *ex36030060 10 Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 25,25 mm and a pin length of 6,68 mm (± 0,3 mm) or more but not more than 6,9 mm (± 0,3 mm) 0 % — 31.12.2022 *ex37079029 50 Dry ink powder or toner blend, consisting of: for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers 0 % — 31.12.2022 *ex38019000 20 Pitch coated graphite based powder with: 0 % kg 31.12.2022 *ex38089190 60 Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L) 0 % — 31.12.2022 *ex38112100 30 Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2022 *ex38112100 50 Additives for lubricating oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2022 *ex38112100 60 Additives for lubricating oils, containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2022 *ex38112100 70 Additives for lubricating oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2022 *ex38112100 85 Additives, of a kind used in the manufacture of blends of additives for lubricating oils 0 % — 31.12.2022 *ex38112900 20 Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils 0 % — 31.12.2022 *ex38112900 30 Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2022 *ex38112900 40 Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils 0 % — 31.12.2022 *ex38112900 50 Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % — 31.12.2022 *ex38119000 40 Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % of 2-ethylhexanol 0 % — 31.12.2022 *ex38123990 80 UV-stabilizer, consisting of: 0 % — 31.12.2022 *ex38151990 *ex85069000 87 10 Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) 0 % — 31.12.2018 *ex38159090 16 Initiator based on dimethylaminopropyl urea 0 % — 31.12.2022 *ex38159090 18 Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO′)-, di[chloride(1-)],(CAS RN 1217890-37-3) used to accelerate chemical oxidation or bleaching 0 % — 31.12.2022 *ex38159090 22 Catalyst in powder form consisting by weight of 95 % (± 1 %) titanium dioxide and 5 % (± 1 %) silicon dioxide 0 % — 31.12.2022 *ex38159090 85 Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins 0 % — 31.12.2022 *ex38249992 26 Preparation containing by weight: 0 % — 31.12.2022 *ex38249992 28 Aqueous solution containing by weight 0 % — 31.12.2020 *ex38249992 29 Preparation containing by weight: 0 % — 31.12.2020 *ex38249992 35 Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate 0 % — 31.12.2018 *ex38249992 39 Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol 0 % — 31.12.2018 *ex38249992 47 Preparation, containing: 0 % — 31.12.2022 *ex38249992 49 Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0) 0 % — 31.12.2022 *ex38249992 50 Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses 0 % — 31.12.2022 *ex38249992 80 Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6) 0 % — 31.12.2022 *ex38249993 30 Powder Mixture containing by weight: 0 % — 31.12.2018 *ex38249993 63 Mixture of phytosterols, not in the form of powder, containing by weight: for use in the manufacture of stanols/sterols or stanol/sterol esters 0 % — 31.12.2022 *ex38249993 *ex38249996 83 85 Preparation containing: in which the gas formation from C,C′-azodi(formamide) occurs at 135 °C 0 % — 31.12.2018 *ex38249993 88 Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder, containing by weight: 0 % — 31.12.2022 *ex38249996 45 Lithium nickel cobalt aluminum oxide powder (CAS RN 177997-13-6) with: 0 % kg 31.12.2022 *ex38249996 50 Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators 0 % — 31.12.2022 *ex38249996 87 Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: 0 % — 31.12.2022 *ex39039090 15 Copolymer in the form of granules containing by weight: 0 % — 31.12.2018 *ex39046980 85 Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers 0 % — 31.12.2022 *ex39053000 10 Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors 0 % — 31.12.2022 *ex39059100 40 Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene 0 % — 31.12.2022 *ex39069090 27 Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate 0 % — 31.12.2022 *ex39072020 20 Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1) 0 % — 31.12.2022 *ex39072020 60 Polypropylene glycol monobutyl ether (CAS RN 9003-13-8) of an alkalinity of not more than 1 ppm of sodium 0 % — 31.12.2022 *ex39072099 80 Isoamyl alcohol polyoxyethylene ether (CAS RN 62601-60-9) 0 % kg 31.12.2022 *ex39073000 60 Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5) 0 % — 31.12.2022 *ex39079980 25 Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol 0 % — 31.12.2022 *ex39079980 70 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol 3.5 % — 31.12.2019 *ex39100000 50 Silicone based pressure sensitive adhesive in solvent containing copoly (dimethylsiloxane/diphenylsiloxane) gum 0 % — 31.12.2022 *ex39119019 30 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide 0 % — 31.12.2022 *ex39119099 53 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4) 0 % — 31.12.2022 *ex39119099 57 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0) 0 % — 31.12.2022 *ex39191080 *ex39199080 40 43 Black poly(vinyl chloride) film: 0 % — 31.12.2022 *ex39191080 *ex39199080 45 45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm 0 % — 31.12.2022 *ex39191080 *ex39199080 55 53 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90° of more than 25 N/cm (as determined by the ASTM D 3330 method) 0 % — 31.12.2022 *ex39199080 82 Reflecting film consisting of: 0 % — 31.12.2020 *ex39199080 *ex90019000 83 33 Reflector or diffuser sheets, in rolls, 0 % — 31.12.2022 *ex39202029 94 Co-extruded trilayer film, 0 % — 31.12.2022 *ex39206219 60 Poly(ethylene terephthalate) film: 0 % — 31.12.2022 *ex39209928 55 Thermoplastic polyurethane film extruded, with: of a kind used in the production of laminated safety glass 0 % — 31.12.2018 *ex39211310 20 Rolls of open-cell polyurethane foam: 0 % — 31.12.2022 *ex39211900 60 Multi-porous multilayer separator foil with: 0 % m2 31.12.2022 *ex39211900 70 Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having: for use in the manufacture of a bi-component ePTFE membrane 0 % — 31.12.2022 *ex39211900 80 Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with 0 % — 31.12.2022 *ex39263000 *ex39269097 30 34 Electroplated interior or exterior decorative parts consisting of: for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 0 % p/st 31.12.2022 *ex39269097 33 Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene or polycarbonate, of a kind used for the manufacture of remote controls 0 % p/st 31.12.2019 *ex39269097 77 Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems 0 % p/st 31.12.2021 *ex41044119 10 Buffalo leather, split, chrome tanned synthetic retanned (crust), dry 0 % — 31.12.2022 *ex54071000 10 Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine) 0 % — 31.12.2022 *ex56031290 50 Non-woven: for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles 0 % m2 31.12.2022 *ex70091000 50 Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors: 0 % — 31.12.2022 *ex70191200 *ex70191200 05 25 Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm) 0 % — 31.12.2022 *ex70191910 15 S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm / + 1,5 μm) 0 % — 31.12.2022 *ex70191910 50 Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated 0 % — 31.12.2022 *ex70200010 20 Raw material for optical elements of fused silicon dioxide with: 0 % — 31.12.2022 *ex73151190 10 Roller type steel timing chain with a fatigue limit of 2 kN at 7000 rpm or more for use in the manufacture of engines of motor vehicles 0 % — 31.12.2022 *ex76012020 10 Slabs and billets of aluminium alloy containing lithium 0 % — 31.12.2022 *ex76082020 *ex87089199 30 40 Assembly for supplying compressed air, whether or not with a resonator, comprising at least: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2022 *ex81019600 20 Tungsten wire 0 % — 31.12.2022 *ex81021000 10 Molybdenum powder with: 0 % — 31.12.2022 *ex81059000 10 Bars or wires made of cobalt alloy containing, by weight: conforming to the material specifications AMS 5842, of a kind used in the aerospace industry 0 % — 31.12.2018 *ex81082000 55 Titanium alloy ingot, containing alloy elements by weight of: 0 % — 31.12.2020 *ex81082000 70 Titanium alloy slab, with containing alloy elements by weight of: 0 % — 31.12.2022 *ex81089030 15 Rods and wire of an alloy of titanium with: 0 % kg 31.12.2022 *ex81089050 45 Cold or hot rolled plates, sheets and strips of non-alloyed titanium with: 0 % kg 31.12.2022 *ex81089050 55 Plates, sheets, strip and foil of an alloy of titanium 0 % — 31.12.2021 *ex81089060 30 Seamless tubes and pipes of a titanium or an alloy of titanium with: 0 % kg 31.12.2022 *ex81130090 10 Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits 0 % — 31.12.2022 *ex82073010 10 Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles 0 % p/st 31.12.2022 *ex84073320 *ex84073380 *ex84079080 *ex84079090 10 10 10 10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: 0 % — 31.12.2022 *ex84089043 *ex84089045 *ex84089047 40 30 50 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: for use in the manufacture of vehicles of heading 8427 0 % — 31.12.2022 *ex84099100 40 Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles 0 % — 31.12.2021 *ex84099100 *ex84099900 50 55 exhaust manifold with turbine housing of turbochargers with: 0 % p/st 31.12.2018 *ex84099900 60 Intake manifold for air supply to the engine cylinders, comprising at least: for use in the manufacture of compression ignition engines of motor vehicles 0 % — 31.12.2022 *ex84099900 70 Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of compression ignition engines of motor vehicles 0 % — 31.12.2021 *ex84099900 80 High pressure oil jet for engine piston cooling and lubrication with: for use in the manufacture of compression ignition engines of motor vehicles 0 % — 31.12.2022 *ex84119900 20 Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: 0 % p/st 31.12.2022 *ex84119900 30 Turbine housing of turbochargers with: 0 % p/st 31.12.2021 *ex84148022 *ex84148080 20 20 Air membrane compressor with: of a kind used in the production of motor vehicle seats 0 % — 31.12.2022 *ex84159000 55 Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with: of a kind used in car air-conditioning systems 0 % p/st 31.12.2020 *ex84312000 30 Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427 0 % p/st 31.12.2022 *ex84818069 60 Four-way reversing valve for refrigerants, consisting of: with a working pressure up to 4,5 MPa 0 % p/st 31.12.2022 *ex84821010 *ex84821090 40 30 Ball bearings: for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears or assembly ball screw for steering gears 0 % p/st 31.12.2019 *ex84833032 *ex84833038 20 50 Bearing housing of a kind used in turbochargers: 0 % p/st 31.12.2022 *ex84834090 20 Hydrostatic transmission with: for use in the manufacture of hand-operated lawn mowers of heading 84331190 0 % — 31.12.2022 *ex84834090 30 Hydrostatic transmission with for use in the production of self-propelled lawn mowers with a seat of subheading 84331151, and tractors of subheading 87019190, whose main function is that of a lawn mower 0 % — 31.12.2022 *ex85011099 60 DC motor: for use in the manufacture of electric fryers 0 % — 31.12.2022 *ex85012000 30 Universal AC/DC motor with for use as electric drive of lawnmower blades 0 % — 31.12.2022 *ex85013100 25 DC motors, brushless, with: of the kind used in power steering systems for cars 0 % — 31.12.2022 *ex85013100 75 Brushless DC motor assembly comprised of a motor and transmission, with: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 *ex85013100 *ex85013200 78 75 Automotive-ready, brushless and permanently excited direct current motor with: 0 % — 31.12.2020 *ex85016200 30 Fuel cell system 0 % — 31.12.2022 *ex85030099 40 Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501 0 % p/st 31.12.2022 *ex85043180 40 Electrical transformers: for internal use in the manufacture of set top boxes and TVs 0 % — 31.12.2022 *ex85044082 40 Printed circuit board equipped with a bridge rectifier circuit and other active and passive components: 0 % p/st 31.12.2022 *ex85044082 50 Electric rectifier: for use in the manufacture of products using IPL (Intensive Pulse Light) 0 % p/st 31.12.2022 *ex85045095 50 Solenoid coil with 0 % p/st 31.12.2022 *ex85051100 50 Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions: of a kind to be used in the manufacture of electric servomotors for industrial automation 0 % p/st 31.12.2022 *ex85051100 60 Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with of a kind used in the manufacture of permanent magnets after magnetisation 0 % — 31.12.2022 *ex85051990 50 Article of agglomerated ferrite in the shape of a rectangular prism to become permanent magnet after magnetisation 0 % — 31.12.2022 *ex85076000 25 Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: 0 % — 31.12.2022 *ex85076000 50 Modules for the assembly of batteries of ion lithium electric accumulators with: 0 % — 31.12.2022 *ex85076000 53 Batteries of lithium-ion electric accumulators or rechargeable module: 0 % — 31.12.2022 *ex85113000 55 Ignition coil: for use in the manufacture of engines of motor vehicles 0 % — 31.12.2021 *ex85169000 70 Inner pot: for use in the manufacture of an electric fryer 0 % p/st 31.12.2022 *ex85182995 30 Loudspeakers of: of a kind used for TV sets and video monitors manufacture as well as home entertainment systems 0 % — 31.12.2022 *ex85269120 30 Control unit of the emergency call system containing GSM and GPS module, for use in the manufacture of goods of Chapter 87 0 % — 31.12.2019 *ex85299065 75 Modules comprising at least semiconductor chips for: 0 % p/st 31.12.2022 *ex85299092 70 Rectangular fastening and covering frame: of a kind used for the production of TV sets 0 % p/st 31.12.2022 *ex85366990 51 SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528 0 % p/st 31.12.2022 *ex85366990 88 Secure Digital (SD), CompactFlash, Smart Card and Common interface modules (cards) female connectors and interfaces, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1000 V 0 % p/st 31.12.2022 *ex85369095 40 Rivet contacts 0 % p/st 31.12.2020 *ex85371091 70 Programmable memory controller for a voltage not exceeding 1000 V, of a kind used for the operation of a combustion motor and/or various actuators working with a combustion motor, comprising at least 0 % — 31.12.2022 *ex85442000 30 Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing: of a kind used in the manufacture of goods of Chapter 87 0 % — 31.12.2021 *ex85443000 35 Wire harness: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 *ex85443000 *ex85444290 85 65 extension two-core cable with two connectors, containing at least: of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2020 *ex85481029 10 Spent lithium-ion or nickel metal hydride electric accumulators 0 % — 31.12.2018 *ex87084020 30 Automatic gearbox with a hydraulic torque converter with: for use in the manufacture of motor vehicles of heading 8703 0 % — 31.12.2022 *ex87084020 *ex87084050 40 30 Gear box assembly with one or two inputs and at least three outputs in cast aluminium housing with overall dimensions (excluding the shafts) of not more than 455 mm (width) × 462 mm (height), 680 mm length, equipped with at least: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 *ex87085020 *ex87085099 *ex87089910 *ex87089997 40 30 70 80 Single input, dual output gearcase (transmission) in cast aluminium housing, with overall dimensions not exceeding 148 mm (± 1 mm) × 213 mm (± 1 mm) × 273 mm (± 1 mm) comprising at least: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 *ex87089310 *ex87089390 30 30 Mechanically operated centrifugal clutch for use with an elastomeric belt in a dry environment in a continuously variable transmission (CVT), equipped with: for use in the manufacture of all-terrain or utility task vehicles 0 % — 31.12.2021 *ex87089997 85 Electroplated interior or exterior parts consisting of: for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 0 % p/st 31.12.2022 *ex90012000 10 Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film 0 % — 31.12.2022 *ex90015041 *ex90015049 40 40 Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses 0 % — 31.12.2022 *ex90019000 25 Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % — 31.12.2018 *ex90021100 20 Lenses of a kind used for the production of visualizers or live image cameras 0 % — 31.12.2022 *ex90021100 40 Lenses of a kind used for the production of visualizers or live image cameras 0 % — 31.12.2018 *ex90021100 85 Lens assembly with: for use in the manufacture of CMOS automotive cameras 0 % — 31.12.2019 *ex90029000 40 Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % p/st 31.12.2022 *ex90328900 40 Digital valve controller for controlling liquids and gases 0 % p/st 31.12.2022
industrial monocarboxylic fatty acids of subheading 38231910,
methyl esters of fatty acids of heading 2915 or 2916,
fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,
fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,
stearic acid of subheading 38231100,
goods of heading 3401, or
fatty acids with high purity of heading 2915
of the Genus Mangifera spp.,
with a sugar content by weight of not more than 30 %
of the Genus Carica spp.,
with a sugar content by weight of more than 13 % but not more than 30 %
of the Genus Psidium spp.,
with a sugar content by weight of more than 13 % but not more than 30 %
more than 6 % of salt concentration,
0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and
whether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995
by weight 20 % or more but not more than 70 % free amino acids, and
peptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da
in the form of powder
of a purity by weight of 99,0 % or more
with a median grain size of 0,7 μm or more, but not more than 2,1 μm
where 70 % of the particles have a diameter of not more than 3 μm
of a purity by weight of 99,9 % or more,
with an average grain-size of 0,7 μm or more but not more than 2,1 μm
C.I. Disperse Orange 61 or Disperse Orange 288,
C.I. Disperse Blue 291:1,
C.I. Disperse Violet 93:1,
whether or not containing C.I. Disperse Red 54
of a thickness of 0,3 μm or more but not more than 10 μm, and
coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)
consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),
with a total solid content by weight of 55 % or more, but not more than 57 %, and
with a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,
styrene acrylate/butadiene copolymer
either carbon black or an organic pigment
whether or not containing polyolefin or amorphous silica
an average particle size of 10,8 μm or more but not more than 13,0 μm,
an iron content of less than 40 ppm,
a copper content of less than 5 ppm,
a nickel content of less than 5 ppm,
an average surface area (N2 atmosphere) of 3,0 m2/g or more but not more than 4,36 m2/g, and
a magnetic metal impurity of less than 0,3 ppm
based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),
containing mineral oils,
based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,
with a total base number (TBN) of 280 or more but not more than 320,
containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),
containing mineral oils,
with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,
with a total base number (TBN) of more than 20,
containing more than 20 % or more but not more than 45 % by weight of mineral oils,
based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,
a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and
either an o-hydroxyphenyl triazine UV light absorber or
a chemically modified phenolic compound
60 % or more but not more than 75 % of Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5)
15 % or more but not more than 25 % of 4-(4-nitrophenylazo)-2,6-di-sec-butyl-phenol (CAS RN 111850-24-9), and
10 % or more but not more than 15 % of 2-sec-butylphenol (CAS RN 89-72-5)
10 % or more but not more than 42 % of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5),
10 % or more but not more than 25 % of sulphuric acid (CAS RN 7664-93-9) and
0,5 % or more but not more than 2,9 % of methanol (CAS RN 67-56-1)
85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and
1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate
trioctylphosphine oxide (CAS RN 78-50-2),
dioctylhexylphosphine oxide (CAS RN 31160-66-4),
octyldihexylphosphine oxide (CAS RN 31160-64-2) and
trihexylphosphine oxide (CAS RN 3084-48-8)
85 % or more of zinc diacrylate (CAS RN 14643-87-9),
not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), and
not more than 10 % of zinc stearate (CAS RN 557-05-1)
75 % or more of sterols,
not more than 25 % of stanols,
C,C′-azodi(formamide) (CAS RN 123-77-3),
magnesium oxide (CAS RN 1309-48-4) and
zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)
60 % or more, but not more than 80 % of sitosterols,
not more than 15 % of campesterols,
not more than 5 % of stigmasterols and
not more than 15 % of betasitostanols
a particle size of less than 10 μm,
a purity by weight of more than 98 %
0,1 % or more but not more than 1 % of platinum, and
0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)
78 (± 4 %) of styrene,
9 (± 2 %) of n-butyl acrylate,
11 (± 3 %) of n-butyl methacrylate,
1,5 (± 0,7 %) of methacrylic acid and
0,01 % or more but not more than 2,5 % of polyolefinic wax
with a gloss of more than 30 degrees according to ASTM D2457,
whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner
a polyurethane layer,
a glass microspheres layer,
a metallised aluminium layer, and
an adhesive, covered on one or both sides with a release liner,
whether or not a poly(vinyl chloride) layer,
a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use
for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or
for equal transmission and distribution of light, intended for LCD modules
each layer containing a mixture of polypropylene and polyethylene,
containing not more than 3 % by weight of other polymers,
whether or not containing titanium dioxide in the core layer,
of an overall thickness of not more than 70 μm
of a thickness of not more than 20 μm,
coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm
not self-adhesive,
an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),
a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),
a total thickness of 0,38 mm or more, but not more than 7,6 mm,
a width of 99 cm or more, but not more than 305 cm,
with a thickness of 2,29 mm (± 0,25 mm),
surface-treated with a foraminous adhesion promoter, and
laminated to a polyester film and a layer of textile material
one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides,
a width of 65 mm or more but not more than 170 mm,
a total thickness of 0,01 mm or more but not more than 0,03 mm,
a porosity of 0,25 or more but not more than 0,65
a width of 1600 mm or more but not more than 1730 mm, and
a membrane thickness of 15 μm or more, but not more than 50 μm
zero transversal production direction (TD) shrinkage,
a total thickness of 10 μm or more but not more than 50 μm,
a width of 15 mm or more but not more than 900 mm,
a length of more than 200 m but not more than 3000 m, and
an average pore size between 0,02 μm and 0,1 μm
a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,
layers of copper, nickel and chromium
weighing 30 g/m2 or more, but not more than 60 g/m2,
containing fibres of polypropylene or of polypropylene and polyethylene,
whether or not printed, with:
on one side, 65 % of the total surface area having circular bobbles of 4 mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,
and on other side a smooth untextured surface,
whether or not equipped with plastic backing plate,
whether or not equipped with a heating element,
whether or not equipped with Blind Spot Module (BSM) display
a thickness of 10 cm or more but not more than 40 cm and
a weight of 100 kg or more
one solid aluminium tube whether or not with mounting bracket,
one flexible rubber hose, and
one metal clip
containing by weight 99,95 % or more of tungsten, and
with a maximum cross-sectional dimension of not more than 1,02 mm
a purity by weight of 99 % or more and
a particle size of 1,0 μm or more, but not more than 5,0 μm
35 % (± 2 %) cobalt,
25 % (± 1 %) nickel,
19 % (± 1 %) chromium and
7 % (± 2 %) iron
with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more
a weight of 680 kg or more,
3 % or more but not more than 7 % of aluminium,
1 % or more but not more than 5 % of tin,
3 % or more but not more than 5 % of zirconium,
4 % or more but not more than 8 % of molybdenum
a height of 20,3 cm or more, but not more than 23,3 cm,
a length of 246,1 cm or more, but not more than 289,6 cm,
a width of 40,6 cm or more, but not more than 46,7 cm,
a weight of 820 kg or more but not more than 965 kg,
5,2 % or more but not more than 6,2 % of aluminium,
2,5 % or more but not more than 4,8 % of vanadium
a uniform solid cross-section in a form of a cylinder,
with a diameter of 0,8 mm or more, but not more than 5 mm,
an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,
a silicon content by weight of 0,3 % or more, but not more than 0,6 %,
a niobium content by weight of 0,1 or more, but not more than 0,3 %, and
an iron content by weight of not more than 0,2 %
a thickness of 0,4 mm or more, but not more than 100 mm,
a length of not more than 14 m, and
a width of not more than 4 m
a diameter of 19 mm or more but not more than 159 mm,
a wall thickness of 0,4 mm or more but not more than 8 mm, and
a maximum length of 18 m
self-propelled lawn mowers, with a seat of subheading 84331151, and hand-operated lawn mowers of heading 84331190,
tractors of subheading 87019190, whose main function is that of a lawn mower,
four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010 or
snowploughs and snow blowers of subheading 843020
a capacity of not more than 3850 cm3, and
a rated output of 15 kW or more but not more than 85 kW,
a heat-resistance of not more than 1050 °C, and
a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 130 mm
a throttle,
a boost pressure sensor
an opening pressure of 1 bar or more, but not more than 3 bar,
a closing pressure of more than 0,7 bar,
a one-way valve
of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,
with a heat-resistance of not more than 1100 °C,
with a diameter of 28 mm or more, but not more than 180 mm,
with a height of 20 mm or more, but not more than 150 mm
a heat-resistance of not more than 1050 °C, and
a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 130 mm
a flow of 4,5 l/min or more, but not more than 7 l/min,
power input of not more than 8,1 W, and
a gauge pressure capacity not exceeding 400 hPa (0,4 bar)
a length of 143 mm or more but not more than 292 mm,
a diameter of 31 mm or more but not more than 99 mm,
a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and
a solid particle diameter of not more than 0,06 mm
a solenoid pilot valve
a brass valve body including valve slider and copper connections
with an internal diameter of 3 mm or more,
with an external diameter of not more than 100 mm,
with a width of not more than 40 mm,
whether or not equipped with a duster,
of precision-cast grey cast iron complying with standard DIN EN 1561,
with oil chambers,
without bearings,
with a diameter of 50 mm or more, but not more than 250 mm,
with a height of 40 mm or more, but not more than 150 mm,
whether or not with water chambers and connectors
measurements (without shafts) of not more than 154 mm × 115 mm × 108 mm,
a weight of not more than 3,3 kg,
a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm,
a torque of the output shaft of not more than 10,4 Nm,
a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, and
an operating temperature range of – 5 °C or more, but not more than + 40 °C
a reduction of 20,63:1 or more, but not more than 22,68:1,
an input speed of 1800 rpm or more when loaded and of not more than 3000 rpm when unloaded,
a continuous output torque of 142 Nm or more, but not more than 156 Nm,
an intermittent output torque of 264 Nm or more, but not more than 291 Nm, and
an axle shaft diameter of 19,02 mm or more, but not more than 19,06 mm,
whether or not equipped with a fan impeller or with a pulley with integrated fan impeller
with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loaded
with a power supply voltage of 100 V or more but not more than 240 V
a rated output of 1,2 kW,
a supply voltage of 230 V, and
engine brake,
assembled to a reduction gear with output shaft, which is contained in a plastic housing
an external diameter of 80 mm or more, but not more than 100 mm,
a supply voltage of 12 V,
an output at 20 °C of 300 W or more, but not more than 750 W,
a torque 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,
a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,
with or without the rotor angle position sensor of resolver type or Hall effect type,
electronic control operating by Hall Effect position sensors,
voltage input 9V or more but not more than 16 V,
external diameter of the motor 70 mm or more but not more than 80 mm,
output motor power 350 W or more but not more than 550 W,
maximum output torque 50 Nm or more but not more than 52 Nm,
maximum output rotation speed 280 rpm or more but not more than 300 rpm,
coaxial male spline outputs of outer diameter 20 mm (± 1 mm), 17 teeth and minimum length of teeth 25 mm (± 1 mm), and
with distance between root of splines 119 mm (± 1 mm)
a specified speed of not more than 4100 rpm,
a minimum output of 400 W, but not more than 1,3 kW (at 12 V),
a flange diameter of 90 mm or more, but not more than 150 mm,
a maximum length of 200 mm, measured from the beginning of the shaft to the outer ending,
a housing length of not more than 160 mm, measured from the flange to the outer ending,
a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 6 bore holes) aluminium diecast housing whether or not with a sealing compound (groove with an O-ring and grease),
a stator with single T-tooth design and single coil windings in 12/8 topology, and
surface magnets
consisting of at least phosphoric acid fuel cells,
in a housing with integrated water management and gas treatment,
for permanent, stationary energy supply
with a capacity of 1 kVA or less
without plugs or cables,
with two output connectors
with two input connectors which are available and useable in parallel
able to switch between bright and dimmed operation mode
with an input voltage of 40 V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or
with an input voltage of 230 V (+ 20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or
with an input voltage of 120 V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode
with an input current reaching 80 % of its nominal value within 20 ms
with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions
with an maximum inrush current overshoot of not more than 250 % of the input current
with a period of the inrush current overshoot of not more than 100 ms
with an input current undershoot of not less than 50 % of the input current
with a period of the inrush current undershoot of not more than 20 ms
with a presettable output current
with an output current reaching 90 % of its nominal pre-set value within 50 ms
with an output current reaching zero within 30 ms after removal of the input voltage
with an defined failure status in case of no-load or too-high load (end-of-life function)
with an input AC voltage of 100-240 V at frequency of 50-60 Hz,
with two output DC voltages of 9 V or more but not more than 12 V and 396 V or more but not more than 420 V,
output cables without connectors, and
in a plastic enclosure with dimensions 110 mm (± 0,5 mm) × 60 mm (± 0,5 mm) × 38 mm (± 1 mm)
a power consumption of not more than 6 W,
an insulation resistance of more than 100 M ohms, and
an insert hole of 11,4 mm or more, but not more than 11,8 mm
a length of 15 mm or more but not more than 52 mm,
a width of 5 mm or more but not more than 42 mm,
a diameter of not more than 45 mm,
a height of not more than 45 mm,
whether or not with bevelled edges
of a length of 27 mm or more but not more than 32 mm (± 0,15 mm),
of a width of 8,5 mm or more but not more than 9,5 mm (+ 0,05 mm/– 0,09 mm),
of a thickness of 5,5 mm or more but not more than 5,8 mm (+ 0/– 0,2 mm), and
of a weight of 6,1 g or more but not more than 8,3 g
a width of 352,5 mm (± 1 mm) or 367,1 mm (±1mm)
a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)
a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1mm)
a weight of 45,9 kg or 46,3 kg
a rating of 75 Ah and
a nominal voltage of 60 V
a length of 298 mm or more, but not more than 408 mm,
a width of 33,5 mm or more, but not more than 209 mm,
a height of 138 mm or more, but not more than 228 mm,
a weight of 3,6 kg or more, but not more than 17 kg, and
a power of 458 Wh or more, but not more than 2158 Wh
a length of 1203 mm or more, but not more than 1297 mm,
a width of 282 mm or more, but not more than 772 mm,
a height of 792 mm or more, but not more than 839 mm,
a weight of 253 kg or more, but not more than 293 kg,
power of 22 kWh or 26 kWh, and
constituted of 24 or 48 modules
with a length of 50 mm or more, but not more than 200 mm,
with an operating temperature of – 40 °C or more, but not more than 140 °C, and
with a voltage of 9 V or more, but not more than 16 V,
with or without connection cable,
containing side and central openings,
of annealed aluminium,
with a ceramic coating, heat resistant to more than 200 °C
an impedance of 3 Ohm or more, but not more than 16 Ohm,
a nominal power of 2 W or more, but not more than 20 W,
with or without plastic bracket, and
with or without electric cable fitted with connectors,
the generation of driving signals for pixel addressing, or
driving addressing pixels
of an aluminium alloy containing silicon and magnesium,
with a length of 500 mm or more but not more than 2200 mm,
with a width of 300 mm or more but not more than 1500 mm,
of copper
plated with silver nickel alloy AgNi10 or with silver containing by weight 11,2 % (± 1,0 %) of tin oxide and of indium oxide taken together
with a thickness of the plating of 0,3 mm (– 0/+ 0,015 mm)
whether or not gilded
a printed circuit with active and passive components,
an aluminium housing, and
multiple connectors
a coaxial cable,
two or more connectors, and
3 or more plastic clips for attachment to the dashboard
with an operation voltage of 12 V,
wrapped in tape or covered in plastic convoluted tubing,
with 16 or more strands, with all terminals to be tin plated or equipped with connectors,
a rubber grommet,
a metal attachment bracket
at least eight gears,
an engine torque of 300 Nm or more, and
transverse or longitudinal installation
one exterior-splined output shaft,
a rotary switch to indicate gear position,
the potential for a differential
two electro-magnetic one direction clutches in one cage, working in both directions,
an input shaft with outer diameter of 24 mm (± 1 mm), ended with spline of 22,
a coaxial output bushing with inner diameter of 22 mm or more but not more than 30 mm, ended with spline of 22 teeth or more but not more than 28 teeth
elements that activate the clutch at given rotation and generate (in this way) centrifugal force,
shaft ended with 5 or more but not more than 6 degree taper,
3 weights, and
1 compression spring
a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate,
layers of copper, nickel and chromium
measuring not more than 80 mm × 55 mm × 50 mm,
with a resolution of 160 lines/mm or better, and
with a zoom ratio of 18 times,
measuring not more than 125 mm × 65 mm × 65 mm,
with a resolution of 125 lines/mm or better, and
with a zoom ratio of 16 times
a horizontal field of view range of 50 deg or more, but not more than 200 deg,
a focal length of 1,16 mm or more, but not more than 5,45 mm,
a relative aperture of F/2,0 or more but not more than F/2,6, and
a diameter of 5 mm or more but not more than 18,5 mm,