Commission Implementing Regulation (EU) 2017/62 of 14 December 2016 concerning the authorisation of 3-(methylthio) propionaldehyde, methyl 3-(methylthio) propionate, allylthiol, dimethyl sulfide, dibutyl sulfide, diallyl disulfide, diallyl trisulfide, dimethyl trisulfide, dipropyl disulfide, allyl isothiocyanate, dimethyl disulfide, 2-methylbenzene-1-thiol, S-methyl butanethioate, allyl methyl disulfide, 3-(methylthio) propan-1-ol, 3-(methylthio) hexan-1-ol, 1-propane-1-thiol, diallyl sulfide, 2,4-dithiapentane, 2-methyl-2-(methyldithio) propanal, 2-methylpropane-1-thiol, methylsulfinyl methane, propane-2-thiol, 3,5-dimethyl-1,2,4-trithiolane and 2-methyl-4-propyl-1,3-oxathiane as feed additives for all animal species (Text with EEA relevance)
Grade B
mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.
Address https://gelex.eu/eli/EU/regulation/2017/62@2016-12-14/en
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition, and in particular Article 9(2) thereof,
Whereas:
(1) Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EEC.
(2) 3-(Methylthio) propionaldehyde, methyl 3-(methylthio) propionate, allylthiol, dimethyl sulfide, dibutyl sulfide, diallyl disulfide, diallyl trisulfide, dimethyl trisulfide, dipropyl disulfide, allyl isothiocyanate, dimethyl disulfide, 2-methylbenzene-1-thiol, S-methyl butanethioate, allyl methyl disulfide, 3-(methylthio) propan-1-ol, 3-(methylthio) hexan-1-ol, 1-propane-1-thiol, diallyl sulfide, 2,4-dithiapentane, 2-methyl-2-(methyldithio) propanal, 2-methylpropane-1-thiol, methylsulfinyl methane, propane-2-thiol, 3,5-dimethyl-1,2,4-trithiolane and 2-methyl-4-propyl-1,3-oxathiane (the substances concerned) were authorised without a time limit in accordance with Directive 70/524/EEC as feed additives for all animal species. Those products were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.
(3) In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of the substances concerned as feed additives for all animal species. The applicant requested those additives to be classified in the additive category sensory additives. That application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.
(4) The European Food Safety Authority (the Authority) concluded in its opinion of 17 April 2013 that, under the proposed conditions of use in feed the substances concerned do not have adverse effects on animal health, human health or the environment. For allyl isothiocyanate, the Authority stated that, although additional exposure to that substance through its low use level in animal feeds would not substantially increase consumer exposure, the estimated exposure of consumers is already higher than the acceptable daily intake. For allyl isothiocyanate and 2-methylpropane-1-thiol maximum contents should be set up to ensure consumer safety and environmental protection, respectively. The Authority further concluded that the function of the substances concerned in feed is similar to that on food. The Authority has already concluded that for food the substances concerned are efficacious, as it increases the food smell or palatability. Therefore, that conclusion can be extrapolated for feed. The Authority could not conclude on the safety of the substances concerned used in water for drinking. However, those substances can be used within compound feeds which are subsequently administered via water.
(5) Restrictions and conditions should be provided for to allow better control. For all the substances except allyl isothiocyanate and 2-methylpropane-1-thiol, since safety reasons do not require the setting of a maximum content and, taking into account the re-evaluation performed by the Authority, recommended contents should be indicated on the label of the additive. Where such contents are exceeded, certain information should be indicated on the label of premixtures, compound feeds and feed materials.
(6) The Authority concluded that the substances concerned are to be considered as being irritant to skin, eyes and respiratory tract and as a skin sensitiser. Consequently, appropriate protective measures should be taken. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.
(7) The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of those substances should be authorised as specified in the Annex to this Regulation.
(8) Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for the substances concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.
(9) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,
HAS ADOPTED THIS REGULATION:
Article 1 Authorisation
The substances specified in the Annex, belonging to the additive category sensory additives and to the functional group flavouring compounds, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.
Article 2 Transitional measures
1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.
2. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
3. Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3 Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 14 December 2016. For the Commission The President Jean-Claude Juncker
ANNEX
ANNEX
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg of active substance/kg of complete feedingstuff with a moisture content of 12 % (1) (2) (3) (4) (5) (6) (7) (8) (9) Category: Sensory additives. Functional group: Flavouring compounds 2b12001 — 3-(Methylthio)propionaldehyde All animal species — — — 6 February 2027 2b12002 — Methyl 3-(methylthio)propionate All animal species — — — 6 February 2027 2b12004 — Allylthiol All animal species — — — 6 February 2027 2b12006 — Dimethyl sulfide All animal species — — — 6 February 2027 2b12007 — Dibutyl sulfide All animal species — — — 6 February 2027 2b12008 — Diallyl disulfide All animal species — — — 6 February 2027 2b12009 — Diallyl trisulfide All animal species — — — 6 February 2027 2b12013 — Dimethyl trisulfide All animal species — — — 6 February 2027 2b12014 — Dipropyl disulfide All animal species — — — 6 February 2027 2b12025 — Allyl isothiocyanate All animal species — — 0,05 6 February 2027 2b12026 — Dimethyl disulfide All animal species — — — 6 February 2027 2b12027 — 2-Methylbenzene-1-thiol All animal species — — — 6 February 2027 2b12032 — S-Methyl butanethioate All animal species — — — 6 February 2027 2b12037 — Allyl methyl disulfide All animal species — — — 6 February 2027 2b12062 — 3-(Methylthio)propan-1-ol All animal species — — — 6 February 2027 2b12063 — 3-(Methylthio)hexan-1-ol All animal species — — — 6 February 2027 2b12071 — 1-Propane-1-thiol All animal species — — — 6 February 2027 2b12088 — Diallyl sulfide All animal species — — — 6 February 2027 2b12118 — 2,4-Dithiapentane All animal species — — — 6 February 2027 2b12168 — 2-Methyl-2-(methyldithio) propanal All animal species — — — 6 February 2027 2b12173 — 2-Methylpropane-1-thiol All animal species — — 0,04 6 February 2027 2b12175 — Methylsulfinyl methane All animal species — — — 6 February 2027 2b12197 — Propane-2-thiol All animal species — — — 6 February 2027 2b15025 — 3,5-Dimethyl-1,2,4-trithiolane All animal species — — — 6 February 2027 2b16030 — 2-Methyl-4-propyl-1,3-oxathiane All animal species — — — 6 February 2027
Additive composition
3-(Methylthio) propionaldehyde
Characterisation of the active substance
3-(Methylthio) propionaldehyde Produced by chemical synthesis Purity: min. 98 % Chemical formula: C4H8OS CAS number 3268-49-3 FLAVIS No 12.001
Method of analysis
For the determination of 3-(methylthio) propionaldehyde in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Methyl 3-(methylthio)propionate
Characterisation of the active substance
Methyl 3-(methylthio)propionate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C5H10O2S CAS number 13532-18-8 FLAVIS No 12.002
Method of analysis
For the determination of methyl 3-(methylthio)propionate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Allylthiol
Characterisation of the active substance
Allylthiol Produced by chemical synthesis Purity: min. 75 % (min. 98 % allylthiol + allyl sulphide + allyl mercaptan) Chemical formula: C3H6S CAS number 870-23-5 FLAVIS No 12.004
Method of analysis
For the determination of allylthiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Dimethyl sulfide
Characterisation of the active substance
Dimethyl sulfide Produced by chemical synthesis Purity: min. 95 % Chemical formula: C2H6S CAS number 75-18-3 FLAVIS No 12.006
Method of analysis
For the determination of dimethyl sulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Dibutyl sulfide
Characterisation of the active substance
Dibutyl sulfide Produced by chemical synthesis Purity: min. 95 % Chemical formula: C8H18S CAS number 544-40-1 FLAVIS No 12.007
Method of analysis
For the determination of dibutyl sulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Diallyl disulfide
Characterisation of the active substance
Diallyl disulfide Produced by chemical synthesis Purity: min. 80 % (min. 98 % diallyl disulphide +allyl sulphide + allyl mercaptan) Chemical formula: C6H10S2 CAS number 2179-57-9 FLAVIS No 12.008
Method of analysis
For the determination of diallyl disulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Diallyl trisulfide
Characterisation of the active substance
Diallyl trisulfide Produced by chemical synthesis Purity: min. 65 % (min.95 % allyl di-, tri- and tetra sulfides) Chemical formula: C6H10S3 CAS number 2050-87-5 FLAVIS No 12.009
Method of analysis
For the determination of diallyl trisulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Dimethyl trisulfide
Characterisation of the active substance
Dimethyl trisulfide Produced by chemical synthesis Purity: min. 97 % Chemical formula: C2H6S3 CAS number 3658-80-8 FLAVIS No 12.013
Method of analysis
For the determination of dimethyl trisulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Dipropyl disulfide
Characterisation of the active substance
Dipropyl disulfide Produced by chemical synthesis Purity: min. 98 % Chemical formula: C6H14S2 CAS number 629-19-6 FLAVIS No 12.014
Method of analysis
For the determination of dipropyl disulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Allyl isothiocyanate
Characterisation of the active substance
Allyl isothiocyanate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C4H5NS CAS number 57-06-7 FLAVIS No 12.025
Method of analysis
For the identification of allyl isothiocyanate in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Dimethyl disulfide
Characterisation of the active substance
Dimethyl disulfide Produced by chemical synthesis Purity: min. 97 % Chemical formula: C2H6S2 CAS number 624-92-0 FLAVIS No 12.026
Method of analysis
For the determination of dimethyl disulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
2-Methylbenzene-1-thiol
Characterisation of the active substance
2-Methylbenzene-1-thiol Produced by chemical synthesis Purity: min. 95 % Chemical formula: C7H8S CAS number 137-06-4 FLAVIS No 12.027
Method of analysis
For the determination of 2-methylbenzene-1-thiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
S-Methyl butanethioate
Characterisation of the active substance
S-Methyl butanethioate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C5H10OS CAS number 2432-51-1 FLAVIS No 12.032
Method of analysis
For the determination of S-methyl butanethioate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Allyl methyl disulfide
Characterisation of the active substance
Allyl methyl disulfide Produced by chemical synthesis Purity: min. 90 % Chemical formula: C4H8S2 CAS number 2179-58-0 FLAVIS No 12.037
Method of analysis
For the determination of allyl methyl disulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
3-(Methylthio)propan-1-ol
Characterisation of the active substance
3-(Methylthio)propan-1-ol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C4H10OS CAS number 505-10-2 FLAVIS No 12.062
Method of analysis
For the determination of 3-(methylthio)propan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
3-(Methylthio)hexan-1-ol
Characterisation of the active substance
3-(Methylthio)hexan-1-ol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C7H16OS CAS number 51755-66-9 FLAVIS No 12.063
Method of analysis
For the determination of 3-(methylthio)hexan-1-ol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
1-Propane-1-thiol
Characterisation of the active substance
1-Propane-1-thiol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C3H8S CAS number 107-03-9 FLAVIS No 12.071
Method of analysis
For the determination of 1-propane-1-thiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Diallyl sulfide
Characterisation of the active substance
Diallyl sulfide Produced by chemical synthesis Purity: min. 97 % Chemical formula: C6H10S CAS number 592-88-1 FLAVIS No 12.088
Method of analysis
For the determination of diallyl sulfide in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
2,4-Dithiapentane
Characterisation of the active substance
2,4-Dithiapentane Produced by chemical synthesis Purity: min. 99 % Chemical formula: C3H8S2 CAS number 1618-26-4 FLAVIS No 12.118
Method of analysis
For the determination of 2,4-dithiapentane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
2-Methyl-2-(methyldithio)propanal
Characterisation of the active substance
2-Methyl-2-(methyldithio)propanal Produced by chemical synthesis Purity: min. 95 % Chemical formula: C5H10OS2 CAS number 67952-60-7 FLAVIS No 12.168
Method of analysis
For the determination of 2-methyl-2-(methyldithio) propanal in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
2-Methylpropane-1-thiol
Characterisation of the active substance
2-Methylpropane-1-thiol Produced by chemical synthesis Purity: min. 97 % Chemical formula: C4H10S CAS number 513-44-0 FLAVIS No 12.173
Method of analysis
For the identification of 2-methylpropane-1-thiol in the feed additive and flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Methylsulfinylmethane
Characterisation of the active substance
Methylsulfinylmethane Produced by chemical synthesis Purity: min. 99 % Chemical formula: C2H6OS CAS number 67-68-5 FLAVIS No 12.175
Method of analysis
For the determination of methylsulfinylmethane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
Propane-2-thiol
Characterisation of the active substance
Propane-2-thiol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C3H8S CAS number 75-33-2 FLAVIS No 12.197
Method of analysis
For the determination of propane-2-thiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
3,5-Dimethyl-1,2,4-trithiolane
Characterisation of the active substance
3,5-Dimethyl-1,2,4-trithiolane Produced by chemical synthesis Purity: min. 90 % Secondary components: diethyl trisulphide, dimethylbenzylcarbinol, N,N-dimethyl-ethanethioamide, 4,6-dimethyl1,2,3,5-tetracyclohexane, 3-methyl-1,2,4-trithiolane, 2-methyl-4-propyl 1,3-oxathiane Chemical formula: C4H8S3 CAS number 23654-92-4 FLAVIS No 15.025
Method of analysis
For the determination of 3,5-dimethyl-1,2,4-trithiolane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.
Additive composition
2-Methyl-4-propyl-1,3-oxathiane
Characterisation of the active substance
2-Methyl-4-propyl-1,3-oxathiane Produced by chemical synthesis Purity: min. 98 % Chemical formula: C8H16OS CAS number 67715-80-4 FLAVIS No 16.030
Method of analysis
For the determination of 2-methyl-4-propyl-1,3-oxathiane in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.
1. The additive shall be incorporated into the feed in the form of a premixture.
2. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.
3. The recommended maximum content of the active substance shall be: 0,05 mg/kg of complete feedingstuff with a moisture content of 12 %.
4. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg.
5. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg.
6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including safety glasses and gloves.