Gelex

Commission Implementing Regulation (EU) 2018/245 of 15 February 2018 concerning the authorisation of menthol, d-carvone, menthyl acetate, d,l-isomenthone, 3-methyl-2-(pent-2(cis)-enyl)cyclopent-2-en-1-one, 3,5,5-trimethylcyclohex-2-en-1-one, d-fenchone, fenchyl alcohol, carvyl acetate, dihydrocarvyl acetate and fenchyl acetate as feed additives for all animal species (Text with EEA relevance)

In forceVersion 2018-02-15from 2018-03-15
Grade B

mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.

Ask Gelex about this law

Address https://gelex.eu/eli/EU/regulation/2018/245@2018-02-15/en

Contents
  1. Preamble
    1. Article 1 Authorisation
    2. Article 2 Transitional measures
    3. Article 3 Entry into force
  3. ANNEX
  4. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.
  5. ANNEX Additive composition
  6. ANNEX 1.2.3.4.5.6. Additive composition
  7. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6. Additive composition
  8. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition
  9. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition
  10. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition
  11. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition
  12. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition
  13. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition
  14. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition
  15. ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition, and in particular Article 9(2) thereof,

Whereas:

(1) Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EEC.

(2) The substances menthol, d-carvone, menthyl acetate, d,l-isomenthone, 3-methyl-2-(pent-2(cis)-enyl)cyclopent-2-en-1-one, 3,5,5-trimethylcyclohex-2-en-1-one, d-fenchone, fenchyl alcohol, carvyl acetate, dihydrocarvyl acetate and fenchyl acetate (substances concerned) were authorised without a time limit by Directive 70/524/EEC as feed additives for all animal species. Those substances were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.

(3) In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of the substances concerned as feed additives for all animal species. The applicant requested those additives be classified in the additive category sensory additives. That application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.

(4) The European Food Safety Authority (the Authority) concluded in its opinion of 20 April 2016 that, under the proposed conditions of use the substances concerned do not have adverse effects on animal health, human health or the environment. The Authority has concluded that, since the substances concerned are efficacious when used in food as flavourings and their function in feed is essentially the same as in food, no further demonstration of efficacy is necessary. Therefore, that conclusion can be extrapolated to feed. The applicant withdrew the application for the use of the substances concerned in water for drinking.

(5) The Authority further noted that hazards for the skin, eye contact and respiratory exposure are recognised. Most substances are classified as irritating to the respiratory system. Consequently, appropriate protective measures should be taken. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.

(6) The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of those substances should be authorised as specified in the Annex to this Regulation.

(7) The applicant proposed use levels for the substances concerned to the Authority. Having regard to that proposal, the Authority considered that certain use levels are safe (levels considered by the Authority). For the purpose of official controls along the food chain, certain labelling requirements should be provided for. In particular, where the use levels exceed the levels considered by the Authority, it is appropriate to require that the label of premixtures and the labelling of feed materials and compound feed containing the substances concerned include certain information including reference to the levels considered by the Authority.

(8) The fact that the use of the substances concerned in water for drinking is not authorised does not preclude their use in compound feed which is administered via water.

(9) Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for the substances concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.

(10) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,

HAS ADOPTED THIS REGULATION:

Article 1 Authorisation

The substances specified in the Annex, belonging to the additive category sensory additives and to the functional group flavouring compounds, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

Article 2 Transitional measures

1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 15 September 2018 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted.

2. Feed materials and compound feed containing the substances as specified in the Annex which are produced and labelled before 15 March 2019 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.

3. Feed materials and compound feed containing the substances as specified in the Annex which are produced and labelled before 15 March 2020 in accordance with the rules applicable before 15 March 2018 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

Article 3 Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 15 February 2018. For the Commission The President Jean-Claude Juncker

ANNEX

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation mg of active substance/kg of complete feedingstuff with a moisture content of 12 % Category: Sensory additives. Functional group: Flavouring compounds 2b02015 — Menthol All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 25 mg/kg For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b07146 — d-Carvone All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09016 — Menthyl acetate All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 5 mg/kg For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b07078 — d,l-Isomenthone All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the levels referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b07094 — 3-Methyl-2-(pent-2(cis)-enyl)cyclopent-2-en-1-one All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the levels referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b07126 — 3,5,5-Trimethylcyclohex-2-en-1-one All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the levels referred to in point 3. The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and glove. 15.3.2028 2b07159 — d-Fenchone All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the levels referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves 15.3.2028 2b02038 — Fenchyl alcohol All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09215 — Carvyl acetate All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09216 — Dihydrocarvyl acetate All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028 2b09269 — Fenchyl acetate All animal species — — — The additive shall be incorporated into the feed in the form of a premixture. In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level suggested on the label of the premixture would result in exceeding the level referred to in point 3 The functional group, the identification number, the name and the added amount of the active substance shall be indicated in the labelling of feed materials and compound feedingstuffs where the content of the active substance in the complete feedingstuff with a moisture content of 12 % exceeds: 1 mg/kg For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 15.3.2028

ANNEX Additive composition

Menthol

Characterisation of the active substance

Menthol Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C10H20O CAS number: 89-78-1 FLAVIS No: 02.015

Method of analysis

For the determination of menthol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

ANNEX 1.2.3.4.5.6. Additive composition

d-Carvone

Characterisation of the active substance

d-Carvone Produced by chemical synthesis Purity: min. 95 % assay Chemical formula: C10H14O CAS number: 2244-16-8 FLAVIS No: 07.146

Method of analysis

For the determination of d-carvone in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

Menthyl acetate

Characterisation of the active substance

Menthyl acetate Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C12H22O2 CAS number: 29066-34-0 FLAVIS No: 09.016

Method of analysis

For the determination of menthyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

d,l-Isomenthone

Characterisation of the active substance

d,l-Isomenthone Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C10H18O CAS number: 491-07-6 FLAVIS No: 07.078

Method of analysis

For the determination of d,l-isomenthone in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

0,3 mg/kg for pigs and poultry;

0,5 mg/kg for other species and categories.

0,3 mg/kg for pigs and poultry;

0,5 mg/kg for other species and categories

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

3-Methyl-2-(pent-2(cis)-enyl)cyclopent-2-en-1-one

Characterisation of the active substance

3-Methyl-2-(pent-2(cis)-enyl)cyclopent-2-en-1-one Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C11H16O CAS number: 488-10-8 FLAVIS No: 07.094

Method of analysis

For the determination of 3-methyl-2-(pent-2(cis)-enyl)cyclopent-2-en-1-one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

0,3 mg/kg for pigs and poultry;

0,5 mg/kg for other species and categories.

0,3 mg/kg for pigs and poultry;

0,5 mg/kg for other species and categories.

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

3,5,5-Trimethylcyclohex-2-en-1-one

Characterisation of the active substance

3,5,5-Trimethylcyclohex-2-en-1-one Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C9H14O CAS number: 78-59-1 FLAVIS No: 07.126

Method of analysis

For the determination of 3,5,5-trimethylcyclohex-2-en-1-one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

0,3 mg/kg for pigs and poultry;

0,5 mg/kg for other species and categories.

0,3 mg/kg for pigs and poultry;

0,5 mg/kg for other species and categories

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

d-Fenchone

Characterisation of the active substance

d-Fenchone Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C10H16O CAS number: 4695-62-9 FLAVIS No: 07.159

Method of analysis

For the determination of d-fenchone in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

0,3 mg/kg for pigs and poultry;

0,5 mg/kg for other species and categories.

0,3 mg/kg for pigs and poultry;

0,5 mg/kg for other species and categories

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

Fenchyl alcohol

Characterisation of the active substance

Fenchyl alcohol Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C10H18O CAS number: 1632-73-1 FLAVIS No: 02.038

Method of analysis

For the determination of fenchyl alcohol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

Carvyl acetate

Characterisation of the active substance

Carvyl acetate Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C12H18O2 CAS number: 97-42-7 FLAVIS No: 09.215

Method of analysis

For the determination of carvyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

Dihydrocarvyl acetate

Characterisation of the active substance

Dihydrocarvyl acetate Produced by chemical synthesis Purity: min. 97 % assay Chemical formula: C12H20O2 CAS number: 20777-49-5 FLAVIS No: 09.216

Method of analysis

For the determination of dihydrocarvyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL

ANNEX 1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6.1.2.3.4.5.6. Additive composition

Fenchyl acetate

Characterisation of the active substance

Fenchyl acetate Produced by chemical synthesis Purity: min. 98 % assay Chemical formula: C12H20O2 CAS number: 13851-11-1 FLAVIS No: 09.269

Method of analysis

For the determination of fenchyl acetate in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL

Versions

  1. 2018-02-15

Cited by