Address https://gelex.eu/eli/EU/regulation/2018/914@2018-06-25/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
3. ANNEX
4. ANNEX I
5. ANNEX II

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) The Union production of 85 products that are not listed in the Annex to Council Regulation (EU) No 1387/2013 is not sufficient to cover the needs of Union industry. It is therefore in the interest of the Union to suspend the autonomous Common Customs Tariff (CCT) duties on those products.

(2) It is necessary to modify the conditions for the suspension of autonomous CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical developments in relation to products and economic trends on the market. In particular, for one suspension it is necessary to adapt the end-use requirements, for one other suspension the applicable duty rate should be amended, for 19 suspensions the description should be clarified or aligned, for 14 suspensions it is necessary to change the classification and for 18 suspensions the supplementary unit should be adapted.

(3) It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for five products listed in the Annex to Regulation (EU) No 1387/2013. Suspensions for those products should therefore be deleted from that Annex.

(4) Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(5) In order to avoid any interruption of the application of the autonomous suspension scheme and to comply with the guidelines set out in the Communication from the Commission concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the suspensions for the products concerned have to apply from 1 July 2018. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1) all asterisks in the table and the endnote (*), containing the text A newly introduced measure or a measure with amended conditions., are deleted;

(2) in the table, the rows for the products for which the CN and TARIC codes are set out in Annex I to this Regulation are deleted;

(3) the rows for the products listed in Annex II to this Regulation are inserted into the table according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 July 2018.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 25 June 2018. For the Council The President N. Dimov

ANNEX

ANNEX I

In the table set out in the Annex to Regulation (EU) No 1387/2013, the rows relating to suspensions for the products identified by the following CN and TARIC codes are deleted: CN code TARIC ex21069092 50 ex28372000 20 ex28419030 10 ex29122900 35 ex29161400 30 ex29215990 10 ex29322090 50 ex29342080 15 ex29349990 54 ex32089019 25 ex32089091 20 ex37050090 10 ex38019000 20 ex38249992 73 ex38249996 45 ex39019080 91 ex39069090 63 ex39072099 80 ex39094000 40 ex39129010 10 ex39199080 29 ex39209990 20 ex39263000 10 ex39269097 50 ex39269097 77 ex70200010 20 ex81082000 55 ex81082000 70 ex81089030 15 ex81089030 80 ex81089050 45 ex81089060 30 ex84159000 20 ex84833032 20 ex84833038 50 ex84834090 20 ex85013100 25 ex85030091 31 ex85030099 32 ex85030099 50 ex85051100 60 ex85051990 50 ex85076000 25 ex85299092 55 ex85299092 59 ex87082910 10 ex87082990 10 ex87089510 40 ex87089599 10 ex87089910 30 ex87089997 15 ex90138090 20.

ANNEX II

In the table set out in the Annex to Regulation (EU) No 1387/2013, the following rows are inserted according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively: CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review ex21069092 50 Casein protein hydrolysate consisting of: 0 % — 31.12.2022 ex21069098 47 Preparation, having a moisture content of 1 % or more, but not more than 4 %, and containing by weight: for use in the manufacture of products of the food and drink industry 0 % — 31.12.2022 ex27129099 10 Blend of 1-alkenes (alpha-olefins) (CAS RN 131459-42-2) containing by weight 80 % or more of 1-alkenes of a chain length of 24 carbon atoms or more, but not exceeding 64 carbon atoms containing by weight more than 72 % 1-alkenes with more than 28 carbon atoms 0 % — 31.12.2022 ex28419030 10 Potassium metavanadate (CAS RN 13769-43-2) 0 % — 31.12.2022 ex28421000 50 Fluorphlogopite (CAS RN 12003-38-2) 0 % — 31.12.2022 ex28429080 30 Aluminum trititanium dodecachloride (CAS RN 12003-13-3) 0 % — 31.12.2022 ex29039980 60 1,1′-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1) 0 % — 31.12.2022 ex29052990 10 Cis-hex-3-en-1-ol (CAS RN 928-96-1) 0 % — 31.12.2022 ex29062900 50 2,2′-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5) 0 % — 31.12.2022 ex29072900 75 Biphenyl-4,4′-diol (CAS RN 92-88-6) 0 % — 31.12.2018 ex29122900 35 Cinnamaldehyde (CAS RN 104-55-2) 0 % — 31.12.2022 ex29122900 45 p-Phenylbenzaldehyde (CAS RN 3218-36-8) 0 % — 31.12.2022 ex29124900 50 2,6-dihydroxybenzaldehyde (CAS RN 387-46-2) 0 % — 31.12.2022 ex29142900 70 2-sec-butylcyclohexanone (CAS RN 14765-30-1) 0 % — 31.12.2022 ex29142900 80 1-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) 0 % — 31.12.2022 ex29153900 10 Cis-3-hexenyl acetate (CAS RN 3681-71-8) 0 % — 31.12.2022 ex29153900 30 4-tert-butylcyclohexyl acetate (CAS RN 32210-23-4) 0 % — 31.12.2022 ex29159070 20 Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5) 0 % — 31.12.2022 ex29162000 20 Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RNs 80657-64-3 and 80623-07-0) 0 % — 31.12.2022 ex29183000 15 2-fluoro-5-formylbenzoic Acid (CAS RN 550363-85-4) 0 % — 31.12.2022 ex29189990 38 Diclofop-methyl (ISO) (CAS RN 51338-27-3) 0 % — 31.12.2022 ex29215990 10 Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8) 0 % — 31.12.2018 ex29223900 15 2-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9) 0 % — 31.12.2022 ex29269070 15 2-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0) 0 % — 31.12.2022 ex29269070 18 Flumethrin (ISO) CAS RN 69770-45-2) 0 % — 31.12.2022 ex29269070 33 Deltamethrin (ISO) (CAS RN 52918-63-5) 0 % — 31.12.2022 ex29270000 25 2,2′-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8) 0 % — 31.12.2022 ex29319000 10 (3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589-57-0) 0 % — 31.12.2022 ex29321300 20 Furfuryl Alcohol (CAS RN 98-00-0) 0 % — 31.12.2022 ex29322090 50 L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5) 0 % — 31.12.2022 ex29329900 23 2-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8) 0 % — 31.12.2022 ex29333999 38 (2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6) 0 % — 31.12.2022 ex29333999 39 2,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4) 0 % — 31.12.2022 ex29333999 51 2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8) 0 % — 31.12.2022 ex29335995 22 6-chloro-1,3-dimethyluracil (CAS RN 6972-27-6) 0 % — 31.12.2022 ex29335995 24 1-(Cyclopropylcarbonyl)piperazine Hydrochloride (CAS RN 1021298-67-8) 0 % — 31.12.2022 ex29335995 26 5-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524-64-7) 0 % — 31.12.2022 ex29337900 25 Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8) 0 % — 31.12.2022 ex29339980 48 5-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2) 0 % — 31.12.2022 ex29342080 15 Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7) 0 % — 31.12.2022 ex29349990 54 2-benzyl-2-dimethylamino-4′-morpholinobutyrophenone (CAS RN 119313-12-1) 0 % — 31.12.2022 ex29349990 59 Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9) 0 % — 31.12.2022 ex29359090 40 Venetoclax (INN) (CAS 1257044-40-8) 0 % — 31.12.2022 ex32041300 15 Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight 0 % — 31.12.2022 ex32041300 25 Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight 0 % — 31.12.2022 ex32041300 35 Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 75 % or more by weight 0 % — 31.12.2022 ex32041300 45 Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 60 % or more by weight 0 % — 31.12.2022 ex32041600 40 Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0): 0 % — 31.12.2022 ex32041700 29 Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight 0 % — 31.12.2022 ex32064970 40 Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight 0 % — 31.12.2022 ex32089019 25 Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight 0 % — 31.12.2022 ex39046980 89 ex37071000 60 Sensitising emulsion, containing by weight: dissolved in heptan-2-one and/or ethyllactate 0 % — 31.12.2022 ex38019000 20 Pitch coated graphite based powder with: 0 % — 31.12.2022 ex38021000 20 Chemically activated carbon in granular form with a Butane Working Capacity of 11 g butane/100 ml or more (as determined by the ASTM D 5228 method) used for vapour absorption and desorption in emission control canisters of motor vehicles 0 % — 31.12.2022 ex38021000 30 Chemically activated carbon in pellet (cylindrical) form, with: used for vapour absorption and desorption in emission control canisters of motor vehicles 0 % — 31.12.2021 ex38089390 60 Preparation in the form of tablets containing by weight: for coating 0 % — 31.12.2022 ex38249993 38 Mixture of 4,4′-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4′-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9) 0 % — 31.12.2022 ex38249996 30 Rare-earth concentrate containing by weight: 0 % — 31.12.2022 ex38249996 45 Lithium nickel cobalt aluminum oxide powder (CAS RN 177997-13-6) with: 0 % — 31.12.2022 ex39019080 91 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid 0 % — 31.12.2018 ex39039090 38 Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1) 0 % — 31.12.2022 ex39046980 88 ex39069090 23 Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm 0 % — 31.12.2022 ex39069090 43 Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5) 0 % — 31.12.2021 ex39072099 80 Isoamyl alcohol polyoxyethylene ether (CAS RN 62601-60-9) 0 % — 31.12.2022 ex39073000 70 Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight: 0 % — 31.12.2022 ex39074000 45 α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3) 0 % — 31.12.2018 ex39092000 10 Polymer mixture, containing by weight: 0 % — 31.12.2022 ex39129010 10 Cellulose acetate propionate, non-plasticised, in the form of powder: 0 % — 31.12.2018 ex39199080 21 Polytetrafluoroethylene film: 0 % — 31.12.2022 ex39199080 22 Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more, but not more than 160 cm 0 % — 31.12.2019 ex39206219 05 Poly(ethylene terephthalate) film in rolls: 0 % — 31.12.2022 ex39206290 10 ex39209990 20 Anisotropic conductive film, in rolls, of a width of 1,2 mm or more, but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays 0 % — 31.12.2018 ex39211900 35 Multilayer film consisting of: for use in the manufacture of lithium-ion batteries 0 % — 31.12.2022 ex39263000 10 Plastic cover with clips for the exterior rear-view mirror of motor vehicles 0 % p/st 31.12.2020 ex39269097 23 ex87082910 10 ex87082990 10 ex39269097 50 Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces 0 % p/st 31.12.2018 ex39269097 77 Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems 0 % p/st 31.12.2021 ex40169957 30 Pin boot of a brake calliper made of vulcanised rubber with: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2022 ex53110090 10 Plain-woven fabric of paper yarns glued on a tissue paper layer: 0 % — 31.12.2022 ex56031490 50 Non-woven fabric of microfibres, composed of polyester fibres with a uniform cross section with: 0 % m2 31.12.2022 ex59119099 50 Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers 0 % — 31.12.2022 ex70200010 20 Raw material for optical elements of fused silicon dioxide with: 0 % p/st 31.12.2022 ex73269092 40 Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with: of a kind used for the fabrication of a nuclear reactor vessel 0 % p/st 31.12.2022 ex73269098 50 Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles: with a threaded end or a mandrel for resistance welding 0 % — 31.12.2022 ex74091900 10 Plates or sheets: and containing at least one of the following: for use in the manufacture of circuit boards 0 % — 31.12.2022 ex74102100 70 ex74130000 20 Loudspeaker centering ring, consisting of one or more vibration dampers and minimum 2 non-insulated copper cables, therein woven or pressed of the kind used in car loudspeakers 0 % — 31.12.2022 ex85189000 45 ex76061220 20 Sign-plates composed of a polyethylene cellular core and outer layers of aluminium, with a total thickness of 1,8 mm or more, but not more than 4,2 mm 0 % — 31.12.2022 ex81082000 55 Titanium alloy ingot: containing alloy elements by weight of: 0 % p/st 31.12.2020 ex81082000 70 Titanium alloy slab, with: containing alloy elements by weight of: 0 % p/st 31.12.2022 ex81089030 15 Rods and wire of an alloy of titanium with: 0 % — 31.12.2022 ex81089030 25 Titanium-aluminium-vanadium alloy (TiAl6V4) bars, rods and wire, complying with AMS standards 4928, 4965 or 4967 0 % — 31.12.2020 ex81089050 45 Cold or hot rolled plates, sheets and strips of non-alloyed titanium with: 0 % — 31.12.2022 ex81089060 30 Seamless tubes and pipes of titanium or an alloy of titanium with: 0 % — 31.12.2022 ex84189910 70 Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles 0 % p/st 31.12.2021 ex84811099 20 Electromagnetic pressure reducing valve with: 0 % — 31.12.2022 ex84811099 30 Pressure reducing valves in a brass case with: of a kind used for incorporation in fuel delivery modules of motor vehicles 0 % — 31.12.2022 ex84818059 30 Two-way flow control valve with housing, with: 0 % — 31.12.2022 ex84818059 40 Flow-control valve: 0 % — 31.12.2022 ex84818059 50 Electromagnetic valve for quantity control with: 0 % — 31.12.2022 ex84818059 60 Electromagnetic valve for quantity control: 0 % — 31.12.2022 ex84833032 30 Bearing housing of a kind used in turbochargers: 0 % p/st 31.12.2022 ex84833038 60 ex84834090 20 Hydrostatic transmission with: for use in the manufacture of hand-operated lawn mowers of subheading 84331190 0 % p/st 31.12.2022 ex85013100 50 DC motors, brushless, with: of the kind used in power steering systems for cars 0 % — 31.12.2022 ex85030091 31 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring 0 % p/st 31.12.2018 ex85030099 32 ex85030099 55 Stator for brushless motor, with: of a kind used in the manufacture of washing machines, washer-dryers or dryers equipped with direct drive drums 0 % p/st 31.12.2018 ex85045095 80 Self-induction coil: 0 % — 31.12.2022 ex85051100 63 Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with: of a kind used in the manufacture of permanent magnets after magnetisation 0 % p/st 31.12.2022 ex85051990 50 Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation: 0 % p/st 31.12.2022 ex85065030 10 Lithium manganese dioxide cell, with: for use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS) 0 % — 31.12.2022 ex85075000 40 Nickel-metal Hydride (NiMH) battery assembly, with: for use in the manufacture of motor vehicles of Chapter 87 0 % — 31.12.2022 ex85076000 25 Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: 0 % p/st 31.12.2022 ex85122000 50 Cabin overhead lamp in a plastic housing whether or not with a storage box, with an operating voltage of 8 V or more, but not more than 16 V, containing: for use in the manufacture of motor vehicles 0 % — 31.12.2022 ex85123090 30 Sound alarm device for protection against burglary into the vehicle: for use in the manufacture of motor vehicles 0 % — 31.12.2022 ex85261000 30 Radar sensor equipment with a control unit of blind spot detection system: for use in the manufacture of motor vehicles 0 % — 31.12.2022 ex85299092 33 LCD modules combined with touch screen facilities: used solely for installation in motor vehicles of Chapter 87 0 % — 31.12.2022 ex85299092 39 LCD modules with: for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 0 % p/st 31.12.2020 ex85299092 55 OLED modules, consisting of: for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2019 ex85371091 55 Electronic control unit of automatic parking system with the ability to evaluate the surroundings of the car and control automatic parking: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2022 ex85371091 65 Electronic control unit for optimal engine performance: for use in the manufacture of motor vehicles 0 % — 31.12.2022 ex85371098 85 Electronic airbag control unit: for use in the manufacture of motor vehicles 0 % — 31.12.2022 ex85409100 20 Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having: 0 % — 31.12.2022 ex87084020 50 Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position, consisting of: with the dimensions of: for use in the manufacture of motor vehicles of Chapter 87 0 % — 31.12.2022 ex87084050 40 ex87085020 50 Double flange bearing of 3rd generation, for motor vehicles: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2022 ex87085055 20 ex87085091 10 ex87085099 40 ex87089910 35 Holder of front radiator or intercooler whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2021 ex87089997 35 ex87149910 20 Bicycle handlebars: for use in the manufacture of bicycles 0 % — 31.12.2022 ex87149910 89 ex90138090 30 Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of: of a kind used for incorporation into products of Chapters 84-90 and 95 0 % p/st 31.12.2019

by weight 20 % or more, but not more than 70 % free amino acids, and

peptones of which by weight more than 90 % having a molecular weight of not more than 2000 Da

15 % or more, but not more than 35 % of buttermilk,

20 % (± 10 %) of lactose,

20 % (± 10 %) of whey protein concentrate,

15 % (± 10 %) of cheddar cheese,

3 % (± 2 %) of salt,

0,1 % or more, but not more than 10 % of lactic acid E270,

0,1 % or more, but not more than 10 % of gum arabic E414,

with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, and

containing a preservative

not more than 5 % of photoacid generator,

2 % or more, but not more than 50 % of phenolic resins, and

not more than 7 % of epoxy-containing derivatives,

an average particle size of 10,8 μm or more, but not more than 13,0 μm,

an iron content of less than 40 ppm,

a copper content of less than 5 ppm,

a nickel content of less than 5 ppm,

an average surface area (N2 atmosphere) of 3,0 m2/g or more, but not more than 4,36 m2/g, and

a magnetic metal impurity of less than 0,3 ppm

a diameter of 2 mm or more, but not more than 3 mm, and

a Butane Working Capacity of 5 g butane/100 ml or more (as determined by the ASTM D 5228 method),

0,55 % or more, but not more than 2,50 % of 1-methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, and

less than 0,05 % of each of the two impurities, 1-chloro-2-methylpropene (CAS RN 513-37-1) and 3-chloro-2-methylpropene (CAS RN 563-47-3),

cerium oxide (CAS RN 1306-38-3) of 20 % or more, but not more than 30 %,

lanthanum oxide (CAS RN 1312-81-8) of 2 % or more, but not more than 10 %,

yttrium oxide (CAS RN 1314-36-9) of 10 % or more, but not more than 15 %, and

zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide of not more than 65 %

a particle size of less than 10 μm,

a purity by weight of more than 98 %

65 % or more, but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and

none or not more than 0,5 % of carbon black (CAS RN 1333-86-4)

60 % or more, but not more than 75 % of melamine resin (CAS RN 9003-08-1),

15 % or more, but not more than 25 % of silica (CAS RN 14808-60-7 or 60676-86-0),

5 % or more, but not more than 15 % of cellulose (CAS RN 9004-34-6), and

1 % or more, but not more than 15 % of phenolic resin (CAS RN 25917-04-8)

containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method), and

of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method)

with a thickness of 50 μm or more, but not more than 155 μm,

with a width of 6,30 mm or more, but not more than 585 mm,

an elongation at break of not more than 200 %, and

coated on one side with a pressure sensitive silicon adhesive with a thickness of not more than 40 μm

with a thickness of 0,335 mm or more, but not more than 0,365 mm, and

coated with a gold layer with a thickness of 0,03 μm or more, but not more than 0,06 μm

30 % or more, but not more than 60 % of a microporous polypropylene layer (CAS RN 9003 07-0),

20 % or more, but not more than 40 % of a microporous polyethylene layer (CAS RN 9002-88-4), and

20 % or more, but not more than 40 % of a boehmite layer/coating (CAS RN 1318-23-6),

an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm,

a height of 15 mm or more, but not more than 40 mm, and

a ribbed design,

with a weight of 230 g/m2 or more, but not more than 280 g/m2, and

cut into rectangles with a side length of 40 cm or more, but not more than 140 cm

a weight of more than 150 g/m2,

a denier of 0,06 or more, but not more than 0,50 den,

containing by weight 74 % or more of polyethylene terephthalate

a thickness of 10 cm or more, but not more than 40 cm, and

a weight of 100 kg or more

a diameter of 5752 mm or more, but not more than 5758 mm,

a height of 3452 mm or more, but not more than 3454 mm,

a total weight 167875 kg or more, but not more than 168125 kg,

with a chrome coating,

of a diameter of 11 mm or more, but not more than 28 mm,

of a length of 80 mm or more, but not more than 600 mm,

with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25,

coated on one or both sides with a copper film with a thickness of not more than 3,2 mm,

poly(tetrafluoroethylene) (CAS RN 9002-84-0),

poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4),

epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height,

with a height of 17,8 cm or more, a length of 180 cm or more, a width of 48,3 cm or more,

a weight of 680 kg or more,

3 % or more, but not more than 7 % of aluminium,

1 % or more, but not more than 5 % of tin,

3 % or more, but not more than 5 % of zirconium,

4 % or more, but not more than 8 % of molybdenum

a height of 20,3 cm or more, but not more than 23,3 cm,

a length of 246,1 cm or more, but not more than 289,6 cm,

a width of 40,6 cm or more, but not more than 46,7 cm,

a weight of 820 kg or more, but not more than 965 kg,

5,2 % or more, but not more than 6,2 % of aluminium,

2,5 % or more, but not more than 4,8 % of vanadium

a uniform solid cross-section in the form of a cylinder,

with a diameter of 0,8 mm or more, but not more than 5 mm,

an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,

a silicon content by weight of 0,3 % or more, but not more than 0,6 %,

a niobium content by weight of 0,1 or more, but not more than 0,3 %, and

an iron content by weight of not more than 0,2 %

a thickness of 0,4 mm or more, but not more than 100 mm,

a length of not more than 14 m, and

a width of not more than 4 m

a diameter of 19 mm or more, but not more than 159 mm,

a wall thickness of 0,4 mm or more, but not more than 8 mm, and

a maximum length of 18 m

a plunger,

at least 275 mPa internal tightness,

a plastic connector with 2 silver or tin pins

a length of not more than 18 mm (± 1 mm),

a width of not more than 30 mm (± 1 mm),

at least 5, but not more than 9 outlet holes with at least 0,110 mm, but not more than 0,134 mm diameter,

at least 640 cm3/minute, but not more than 805 cm3/minute flow rate,

at least 19, but not more than 300 MPa operating pressure

made of steel,

with an outlet hole with a diameter of at least 0,175 mm, but not more than 0,185 mm,

with an inlet hole with a diameter of at least 0,255 mm, but not more than 0,265 mm,

with chromium nitride coating,

with a surface roughness of Rp 0,4

a plunger,

DLC (Diamond-like carbon) coating,

a solenoid with a of coil resistance of at least 2,6 Ohm, but not more than 3 Ohm,

a supply voltage of 12 V

with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,52 Omh, and with an inductance of at least 0,083 mH, but not more than 0,172 mH,

with a supply voltage of 24 V,

operating at a DC of at least 15,5 A, but not more than 16,5 A

of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,

with oil chambers,

without bearings,

with a diameter of 50 mm or more, but not more than 250 mm,

with a height of 40 mm or more, but not more than 150 mm,

whether or not with water chambers and connectors

measurements (without shafts) of not more than 154 mm × 115 mm × 108 mm,

a weight of not more than 3,3 kg,

a maximum rotation speed of the input shaft of 2700 rpm or more, but not more than 3200 rpm,

a torque of the output shaft of not more than 10,4 Nm,

a rotation speed of the output shaft of not more than 930 rpm at 2800 rpm input speed, and

an operating temperature range of – 5 °C or more, but not more than + 40 °C,

an external diameter of 80 mm or more, but not more than 200 mm,

a supply voltage of 9 V or more, but not more than 16 V,

an output at 20 °C of 300 W or more, but not more than 750 W,

a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,

with or without the rotor angle position sensor of resolver type or Hall effect type,

an internal diameter of 206,6 mm (± 0,5),

an external diameter of 265,0 mm (± 0,2), and

a width of 37,2 mm or more, but not more than 47,8 mm,

with one or more windings, with an inductivity per winding of no more than 62 mH, attached to one or more carrier materials,

with ferrites,

with one or more Negative Temperature Coefficient resistors as a temperature sensor,

whether or not with insulation covers, spacers and connection cables

an external diameter of not more than 45 mm,

a height of not more than 45 mm,

whether or not with bevelled edges,

of a length of 27 mm or more, but not more than 32 mm (± 0,15 mm),

of a width of 8,5 mm or more, but not more than 9,5 mm (+ 0,05 mm/– 0,09 mm),

of a thickness of 5,5 mm or more, but not more than 5,8 mm (+ 0/– 0,2 mm), and

of a weight of 6,1 g or more, but not more than 8,3 g

a diameter of 20 mm or more, but not more than 25 mm,

a length of 3 mm or more, but not more than 6 mm,

a voltage of 3 V or more, but not more than 3,4 V,

a capacity of 200 mAh or more, but not more than 600 mAh,

an automotive test temperature range from – 40 °C to + 125 °C,

a voltage of 190 V or more, but not more than 210 V,

a length of 220 mm or more, but not more than 280 mm,

a width of 500 mm or more, but not more than 600 mm,

a height of 100 mm or more, but not more than 150 mm,

a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1 mm),

a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm),

a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1 mm),

a weight of 45,9 kg or 46,3 kg,

a rating of 75 Ah, and

a nominal voltage of 60 V

at least two light sources,

light switch,

whether or not emergency call button (E-Call),

whether or not panoramic roof slide switch,

whether or not microphone,

whether or not ultrasonic sensor (UIP sensor),

with an operating temperature of – 45 °C or more, but not more than + 95 °C,

with a voltage of 9 V or more, but not more than 16 V,

in a plastic housing,

whether or not with a metal holder,

with a voltage of 8 V or more, but not more than 16 V,

in a plastic housing,

with cable and connector,

solely consisting of one or more TFT cells,

with a diagonal measurement of the screen of 10,7 cm or more, but not more than 36 cm,

with or without LED backlight,

with control electronics for pixel addressing only,

without an EPROM memory (Erasable Programmable Read-only Memory),

with digital RGB Interface (Red, Green, Blue Interface), Touch-Screen Interface,

a diagonal measurement of the screen of 14,5 cm or more, but not more than 25,5 cm,

an LED backlight,

a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network) bus or APIX2 (Automotive Pixel Link) driver module and other active and passive components,

a 6 to 8 pin connector for power supply and a 2 to 4-pin connector for LVDS (Low-voltage differential signalling)/LIN signals or an APIX2 interface or an LVDS/LIN interface for signals and power supply,

whether or not in a housing,

one or more TFT glass or plastic cells, containing organic material,

with or without combined touch screen facilities, and

one or more printed circuit boards with control electronics for pixel addressing,

of a voltage of 5 V or more, but not more than 16 V,

with programmable memory,

with at least one connector,

in a plastic housing,

whether or not with a metal holder,

with a programmable memory,

with a voltage of 8 V or more, but not more than 16 V,

with at least one composite connector,

in a metal housing,

whether or not with metal holders,

with an operating temperature of – 45 °C or more, but not more than 90 °C,

with a voltage of 8 V or more, but not more than 16 V,

with two connectors,

in a metal housing,

a graphite carbon shield mounted in a mini-Vogel type system,

separate pyrolytic carbon blocks used as heating elements, and

a cathode temperature of less than 1800 K at a filament current of 1,26 A

cast aluminium body,

differential gear,

2 electrical motors and gears,

a width of 300 mm or more, but not more than 350 mm,

a height of 420 mm or more, but not more than 500 mm,

a length of 500 mm or more, but not more than 600 mm,

with double-row ball bearing,

whether or not with impulse (encoder) ring,

whether or not with antilock brake system (ABS) sensor,

whether or not with mounted screws,

with or without integrated stem,

made out of carbon fibres and synthetic resin,

one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with a drive arranged in three-dimensional structures on the semiconductor material,

whether or not in a combination with one or more monolithic application-specific integrated circuits (ASIC),

Versions

1. 2018-06-25