Address https://gelex.eu/eli/EU/regulation/2019/998@2019-06-13/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
3. ANNEX
4. ANNEX

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) In order to ensure the sufficient and uninterrupted supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas were opened by Council Regulation (EU) No 1388/2013. Within those tariff quotas, products can be imported into the Union at reduced or zero duty rates.

(2) As it is in the Union's interest to ensure an adequate supply of certain industrial products and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new tariff quotas with order numbers 09.2594, 09.2595, 09.2596, 09.2597, 09.2598 and 09.2599 at zero duty rates for appropriate quantities of those products.

(3) In the case of the tariff quotas with order numbers 09.2679, 09.2683 and 09.2888, the quota volumes should be increased, as an increase is in the interest of the Union. In the case of the tariff quota bearing order number 09.2723, the quota volume should be increased retroactively for the period from 1 January to 31 December 2018.

(4) For the tariff quota with order number 09.2740, the products covered by that tariff quota are covered not only by CN code 23099096 but also by CN code 23099031. The indication of the CN code for that tariff quota should therefore be adapted.

(5) As it is no longer in the Union's interest to maintain the tariff quota with order number 09.2870, it should be closed with effect from 1 July 2019.

(6) The tariff quotas with order numbers 09.2633, 09.2643, 09.2620 and 09.2932 should be closed as a result of the implementation of the agreement in the form of the Declaration on the Expansion of Trade in Information Technology Products, which reduced the duty rate for the products concerned to zero.

(7) Taking into account the amendments to be made and for the sake of clarity, the Annex to Regulation (EU) No 1388/2013 should be replaced.

(8) In order to avoid any interruption of the application of the tariff quota scheme and to comply with the guidelines set out in the communication from the Commission concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff quotas for the products concerned should apply from 1 July 2019 and, for the tariff quota with order number 09.2723, from 1 January 2018. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1388/2013 is amended as follows:

(1) the row for tariff quota with order number 09.2723 is replaced by the following: 09.2723 ex39119019 10 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4′-biphenylene) 1.1.-31.12. 5000 tonnes 0 %

(2) it is replaced by the text set out in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 July 2019. However, point (1) of Article 1 shall apply from 1 January 2018.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 13 June 2019. For the Council The President M.C. Budăi

ANNEX

ANNEX

Order number CN code TARIC Description Quota period Quota volume Quota duty 09.2637 ex07104000 ex20058000 20 30 Corn cobs (Zea mays var. saccharata) whether or not cut, with a diameter of 10 mm or more, but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking 1.1.-31.12. 550 tonnes 0 % 09.2849 ex07108069 10 Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals 1.1.-31.12. 700 tonnes 0 % 09.2664 ex20086039 30 Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products 1.1.-31.12. 1000 tonnes 10 % 09.2740 ex23099031 ex23099096 87 97 Soya bean protein concentrate containing by weight: for use in the manufacture of animal feed products 1.1.-31.12. 30000 tonnes 0 % 09.2913 ex24011035 ex24011070 ex24011095 ex24011095 ex24011095 ex24012035 ex24012070 ex24012095 ex24012095 ex24012095 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than Euro 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 24021000 1.1.-31.12. 6000 tonnes 0 % 09.2828 27122090 Paraffin wax containing by weight less than 0,75 % of oil 1.1.-31.12. 120000 tonnes 0 % 09.2600 ex27129039 10 Slack wax (CAS RN 64742-61-6) 1.1.-31.12. 100000 tonnes 0 % 09.2928 ex28112200 40 Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide 1.1.-31.12. 1700 tonnes 0 % 09.2806 ex28259040 30 Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8) 1.1.-31.12. 12000 tonnes 0 % 09.2872 ex28332980 40 Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate 1.1.-31.12. 160 tonnes 0 % 09.2929 29032200 Trichloroethylene (CAS RN 79-01-6) 1.1.-31.12. 15000 tonnes 0 % 09.2837 ex29037930 20 Bromochloromethane (CAS RN 74-97-5) 1.1.-31.12. 600 tonnes 0 % 09.2933 ex29039980 30 1,3-Dichlorobenzene (CAS RN 541-73-1) 1.1.-31.12. 2600 tonnes 0 % 09.2700 ex29051200 10 Propan-1-ol (propyl alcohol) (CAS RN 71-23-8) 1.1.-31.12. 15000 tonnes 0 % 09.2830 ex29061900 40 Cyclopropylmethanol (CAS RN 2516-33-8) 1.1.-31.12. 20 tonnes 0 % 09.2851 ex29071200 10 O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight 1.1.-31.12. 20000 tonnes 0 % 09.2704 ex29094980 20 2,2,2′,2′-Tetrakis(hydroxymethyl)-3,3′-oxydipropan-1-ol (CAS RN 126-58-9) 1.1.-31.12. 500 tonnes 0 % 09.2624 29124200 Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) (CAS RN 121-32-4) 1.1.-31.12. 1950 tonnes 0 % 09.2683 ex29141990 50 Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet form 1.1.-31.12. 200 tonnes 0 % 09.2852 ex29142900 60 Cyclopropyl methyl ketone (CAS RN 765-43-5) 1.1.-31.12. 300 tonnes 0 % 09.2638 ex29152100 10 Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more 1.1.-31.12. 1000000 tonnes 0 % 09.2972 29152400 Acetic anhydride (CAS RN 108-24-7) 1.1.-31.12. 50000 tonnes 0 % 09.2679 29153200 Vinyl acetate (CAS RN 108-05-4) 1.1.-31.12. 400000 tonnes 0 % 09.2728 ex29159070 85 Ethyl trifluoroacetate (CAS RN 383-63-1) 1.1.-31.12. 400 tonnes 0 % 09.2665 ex29161995 30 Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5) 1.1.-31.12. 8250 tonnes 0 % 09.2684 ex29163990 28 2,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5) 1.1.-31.12. 400 tonnes 0 % 09.2599 ex29171100 40 Diethyl oxalate (CAS RN 95-92-1) 1.7.-31.12. 250 tonnes 0 % 09.2769 ex29171390 10 Dimethyl sebacate (CAS RN 106-79-6) 1.1.-31.12. 1000 tonnes 0 % 09.2634 ex29171980 40 Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 % 1.1.-31.12. 4600 tonnes 0 % 09.2808 ex29182200 10 O-acetylsalicylic acid (CAS RN 50-78-2) 1.1.-31.12. 120 tonnes 0 % 09.2646 ex29182900 75 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12. 380 tonnes 0 % 09.2647 ex29182900 80 Pentaerythritol tetrakis (3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12. 140 tonnes 0 % 09.2975 ex29183000 10 Benzophenone-3,3′,4,4′-tetracarboxylic dianhydride (CAS RN 2421-28-5) 1.1.-31.12. 1000 tonnes 0 % 09.2688 ex29202900 70 Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4) 1.1.-31.12. 6000 tonnes 0 % 09.2648 ex29209010 70 Dimethyl Sulphate (CAS RN 77-78-1) 1.1.-31.12. 18000 tonnes 0 % 09.2598 ex29211999 75 Octadecylamine (CAS RN 124-30-1) 1.7.-31.12. 200 tonnes 0 % 09.2649 ex29212900 60 Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5) 1.1.-31.12. 1700 tonnes 0 % 09.2682 ex29214100 10 Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more 1.1.-31.12. 150000 tonnes 0 % 09.2617 ex29214200 89 4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3) 1.1.-31.12. 500 tonnes 0 % 09.2602 ex29215119 10 O-phenylenediamine (CAS RN 95-54-5) 1.1.-31.12. 1800 tonnes 0 % 09.2730 ex29215990 80 4,4′-Methanediyldianiline (CAS RN 101-77-9) in form of granules, for use in the manufacture of prepolymers 1.1.-31.12. 200 tonnes 0 % 09.2854 ex29241900 85 3-Iodoprop-2-ynyl N-butylcarbamate (CAS RN 55406-53-6) 1.1.-31.12. 250 tonnes 0 % 09.2874 ex29242970 87 Paracetamol (INN) (CAS RN 103-90-2) 1.1.-31.12. 20000 tonnes 0 % 09.2742 ex29261000 10 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815 1.1.-31.12. 50000 tonnes 0 % 09.2856 ex29269070 84 2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9) 1.1.-31.12. 900 tonnes 0 % 09.2708 ex29280090 15 Monomethylhydrazine (CAS 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 (± 5) % 1.1.-31.12. 900 tonnes 0 % 09.2685 ex29299000 30 Nitroguanidine (CAS RN 556-88-7) 1.1.-31.12. 6500 tonnes 0 % 09.2597 ex29309098 94 Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6) 1.7.-31.12. 3000 tonnes 0 % 09.2596 ex29309098 96 2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8) 1.7.-31.12. 150 tonnes 0 % 09.2842 29321200 2-Furaldehyde (furfuraldehyde) 1.1.-31.12. 10000 tonnes 0 % 09.2955 ex29321900 60 Flurtamone (ISO) (CAS RN 96525-23-4) 1.1.-31.12. 300 tonnes 0 % 09.2696 ex29322090 25 Decan-5-olide (CAS RN 705-86-2) 1.1.-31.12. 6000 kilograms 0 % 09.2697 ex29322090 30 Dodecan-5-olide (CAS RN 713-95-1) 1.1.-31.12. 6000 kilograms 0 % 09.2812 ex29322090 77 Hexan-6-olide (CAS RN 502-44-3) 1.1.-31.12. 4000 tonnes 0 % 09.2858 29329300 Piperonal (CAS RN 120-57-0) 1.1.-31.12. 220 tonnes 0 % 09.2878 ex29332990 85 Enzalutamide INN (CAS RN 915087-33-1) 1.1.-31.12. 1000 kilograms 0 % 09.2673 ex29333999 43 2,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5) 1.1.-31.12. 1000 tonnes 0 % 09.2674 ex29333999 44 Chlorpyrifos (ISO) (CAS RN 2921-88-2) 1.1.-31.12. 9000 tonnes 0 % 09.2880 ex29335995 39 Ibrutinib (INN) (CAS RN 936563-96-1) 1.1.-31.12. 5 tonnes 0 % 09.2860 ex29336980 30 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) 1.1.-31.12. 600 tonnes 0 % 09.2595 ex29339980 49 1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) 1.7.-31.12. 20 tonnes 0 % 09.2658 ex29339980 73 5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5) 1.1.-31.12. 400 tonnes 0 % 09.2675 ex29359090 79 4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8) 1.1.-31.12. 1000 tonnes 0 % 09.2710 ex29359090 91 2,4,4-Trimethylpentan-2-aminium (3R,5S,E)-7-(4-(4-fluorophenyl)-6-isopropyl-2-(N-methylmethylsulfonamido)pyrimidin-5-yl)-3,5-dihydroxyhept-6-enoate (CAS RN 917805-85-7) 1.1.-31.12. 5000 kilograms 0 % 09.2945 ex29400000 20 D-Xylose (CAS RN 58-86-6) 1.1.-31.12. 400 tonnes 0 % 09.2686 ex32041100 75 Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight 1.1.-31.12. 250 tonnes 0 % 09.2676 ex32041700 14 Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight 1.1.-31.12. 50 tonnes 0 % 09.2698 ex32041700 30 Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight 1.1.-31.12. 150 tonnes 0 % 09.2659 ex38029000 19 Soda flux calcinated diatomaceous earth 1.1.-31.12. 35000 tonnes 0 % 09.2908 ex38040000 10 Sodium lignosulphonate (CAS RN 8061-51-6) 1.1.-31.12. 40000 tonnes 0 % 09.2889 38051090 Sulphate turpentine 1.1.-31.12. 25000 tonnes 0 % 09.2935 ex38061000 10 Rosin and resin acids obtained from fresh oleoresins 1.1.-31.12. 280000 tonnes 0 % 09.2832 ex38089290 40 Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion 1.1.-31.12. 500 tonnes 0 % 09.2876 ex38112900 55 Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight: used for the manufacture of lubricating oils 1.1.-31.12. 900 tonnes 0 % 09.2814 ex38159090 76 Catalyst consisting of titanium dioxide and tungsten trioxide 1.1.-31.12. 3000 tonnes 0 % 09.2820 ex38247900 10 Mixtures containing by weight: 1.1.-31.12. 6000 tonnes 0 % 09.2644 ex38249992 77 Preparation containing by weight: 1.1.-31.12. 10000 tonnes 0 % 09.2681 ex38249992 85 Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6) 1.1.-31.12. 9000 tonnes 0 % 09.2650 ex38249992 87 Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 % 1.1.-31.12. 2000 tonnes 0 % 09.2888 ex38249992 89 Mixture of tertiary alkyldimethyl amines containing by weight: 1.1.-31.12. 25000 tonnes 0 % 09.2829 ex38249993 43 Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics: 1.1.-31.12. 1600 tonnes 0 % 09.2907 ex38249993 67 Mixture of phytosterols, in the form of powder, containing by weight: for use in the manufacture of stanols/sterols or stanol/sterol esters 1.1.-31.12. 2500 tonnes 0 % 09.2639 39053000 Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups 1.1.-31.12. 15000 tonnes 0 % 09.2671 ex39059990 81 Poly(vinyl butyral)(CAS RN 63148-65-2): 1.1.-31.12. 12500 tonnes 0 % 09.2846 ex39074000 25 Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2) 1.1.-31.12. 2000 tonnes 0 % 09.2723 ex39119019 10 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4′-biphenylene) 1.1.-31.12. with effect from 1.1.2018 5000 tonnes 0 % 09.2816 ex39121100 20 Cellulose acetate flakes 1.1.-31.12. 75000 tonnes 0 % 09.2864 ex39131000 10 Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3) 1.1.-31.12. 10000 tonnes 0 % 09.2641 ex39139000 87 Sodium hyaluronate, non-sterile, with: 1.1.-31.12. 200 kilograms 0 % 09.2661 ex39205100 50 Sheets of polymethylmethacrylate conforming to standards: 1.1.-31.12. 100 tonnes 0 % 09.2645 ex39211400 20 Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm) 1.1.-31.12. 1700 tonnes 0 % 09.2848 ex55051010 10 Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66) 1.1.-31.12. 10000 tonnes 0 % 09.2721 ex59069990 20 Woven and laminated rubberised textile fabric with the following characteristics: used for the manufacture of the retractable roof of motor vehicles 1.1.-31.12. 375000 square metres 0 % 09.2594 ex69091900 55 Ceramic-carbon absorption cartridge: of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles 1.7.-31.12. 500000 pieces 0 % 09.2866 ex70191200 ex70191200 06 26 S glass stratifils (rovings): for use in the manufacture of aeronautics 1.1.-31.12. 1000 tonnes 0 % 09.2628 ex70195200 10 Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames 1.1.-31.12. 3000000 square metres 0 % 09.2799 ex72024990 10 Ferro-chromium containing 1,5 % or more but not more than 4 % by weight of carbon and not more than 70 % of chromium 1.1.-31.12. 50000 tonnes 0 % 09.2652 ex74091100 ex74101100 20 30 Refined copper foil and strips, electrolytically coated 1.1.-31.12. 1020 tonnes 0 % 09.2734 ex74091900 20 Plates or sheets consisting of 1.1.-31.12. 7000000 pieces 0 % 09.2662 ex74102100 55 Plates: 1.1.-31.12. 80000 square metres 0 % 09.2834 ex76042910 20 Aluminium alloy rods with a diameter of 200 mm or more, but not exceeding 300 mm 1.1.-31.12. 2000 tonnes 0 % 09.2835 ex76042910 30 Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm 1.1.-31.12. 1000 tonnes 0 % 09.2736 ex76071190 83 Aluminium and magnesium alloy strip or foil: for use in the manufacture of slats for blinds 1.1.-31.12. 600 tonnes 0 % 09.2906 ex76090000 20 Aluminium tube or pipe fittings for affixing to radiators of motor bikes 1.1.-31.12. 3000000 pieces 0 % 09.2722 81041100 Unwrought magnesium, containing at least 99,8 % by weight of magnesium 1.1.-31.12. 80000 tonnes 0 % 09.2840 ex81043000 20 Magnesium powder: 1.1.-31.12. 2000 tonnes 0 % 09.2629 ex83024900 91 Aluminium telescopic handle for use in the manufacture of luggage 1.1.-31.12. 1500000 pieces 0 % 09.2720 ex84139100 50 Pump head for two cylinder high pressure pump made of forged steel, with: of a kind used in diesel injection systems 1.1.-31.12. 65000 pieces 0 % 09.2850 ex84149000 70 Aluminium alloy compressor wheel with: for use in the assembly of turbochargers without further machining 1.1.-31.12. 5900000 pieces 0 % 09.2909 ex84818085 40 Exhaust valve for use in the manufacture of motorcycle exhaust gas systems 1.1.-31.12. 1000000 pieces 0 % 09.2738 ex84829900 20 Brass cages of a kind used for the manufacture of ball bearings 1.1.-31.12. 35000 pieces 0 % 09.2690 ex84833080 20 Wave slide bearing for axial applications, of FeP01 steel (according to EN 10130-1991) with a sliding layer of porous sinter bronze and poly(tetrafluoroethylene), suitable for installation into motor bike suspension units 1.1.-31.12. 1500000 pieces 0 % 09.2763 ex85014020 ex85014080 40 30 Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30000 rpm but not more than 50000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners 1.1.-31.12. 2000000 pieces 0 % 09.2672 ex85299092 ex94054039 75 70 Printed circuit board with LED diodes: for the manufacture of backlight units for goods of heading 8528 1.1.-31.12. 115000000 pieces 0 % 09.2003 ex85437090 63 Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm × 30 mm 1.1.-31.12. 1400000 pieces 0 % 09.2910 ex87089997 75 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 1.1.-31.12. 200000 pieces 0 % 09.2694 ex87141090 30 Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes 1.1.-31.12. 1000000 pieces 0 % 09.2868 ex87141090 60 Pistons for suspension systems, having a diameter of not more than 55 mm, of sintered steel 1.1.-31.12. 2000000 pieces 0 % 09.2668 ex87149110 ex87149110 ex87149110 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes) 1.1.-31.12. 350000 pieces 0 % 09.2631 ex90019000 80 Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 901310 and 9015 1.1.-31.12. 5000000 pieces 0 %

60 % (± 10 %) of crude protein,

5 % (± 3 %) of crude fibre,

5 % (± 3 %) of crude ash, and

3 % or more but not more than 6,9 % of starch,

a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and

a melting point of 49 °C or more, but not more than 54 °C,

with a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and

a melting point of 110 °C or more, but not more than 125 °C,

28 % or more, but not more than 55 % of 4-monononyldiphenylamine,

45 % or more but not more than 65 % of 4,4′-dinonyldiphenylamine, and

not more than 5 % of 2,4-dinonyldiphenylamine and 2,4′-dinonyldiphenylamine,

60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),

8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),

5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),

not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and

not more than 1 % of ethyl chloride (CAS RN 75-00-3)

55 % or more but not more than 78 % of dimethyl glutarate,

10 % or more but not more than 30 % of dimethyl adipate, and

not more than 35 % of dimethyl succinate

60 % or more but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and

20 % or more but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4)

a resin acid content not exceeding 30 % by weight,

an acid number not exceeding 110, and

a melting point of 100 °C or more

75 % or more of sterols,

not more than 25 % of stanols,

containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and

with a median particle size (D50) of more than 0,6 mm

a weight average molecular weight (Mw) of not more than 900000,

an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,

an ethanol content of not more than 1 % by weight,

an isopropanol content of not more than 0,5 % by weight

EN 4364 (MIL-P-5425E) and DTD5592A, or

EN 4365 (MIL-P-8184) and DTD5592A

with three layers,

one outer layer consists of acrylic fabric,

the other outer layer consists of polyester fabric,

the middle layer consists of chlorobutyl rubber,

the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2,

the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2,

the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm,

extruded fired ceramic bound multicellular cylindrical structure,

10 or more % by weight but not more than 30 % by weight of activated carbon,

70 or more % by weight but not more than 90 % by weight of ceramic binder,

with a diameter of 29 mm or more but not more than 41mm,

a length of not more than 150 mm,

fired at temperature of 800 °C or more,

for vapours adsorption,

composed of continuous glass filaments of 9 μm (± 0,5 μm),

measuring 200 tex or more but not more than 680 tex,

not containing any calcium oxide, and

with a breaking strength of more than 3550 MPa determined by ASTM D2343-09,

a layer of a silicon nitride ceramic with a thickness of 0,32 mm (± 0,1 mm) or more but not more than 1,0 mm (± 0,1 mm),

covered on both sides with a foil of refined copper with a thickness of 0,8 mm (± 0,1 mm), and

on one side partially covered with a coating of silver

consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,

with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

with a comparative tracking index (CTI) of 600 or more

of an alloy conforming to standards 5182-H19 or 5052-H19,

in rolls with an outside diameter of minimum 1250 mm but not more than 1350 mm,

of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,

of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,

having a camber tolerance of not more than 0,4 mm/750 mm,

of a flatness measurement: I-unit ± 4,

having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,

of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,

of purity by weight of 98 % or more, but not more than 99,5 %,

with a particle size of 0,2 mm or more but not more than 0,8 mm

milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and

drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm,

a diameter of 20 mm or more, but not more than 130 mm, and

a weight of 5 g or more, but not more than 800 g,

continuously or centrifugally cast,

turned,

containing by weight 35 % or more, but not more than 38 % of tin,

containing by weight 0,75 % or more, but not more than 1,25 % of lead,

containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and

with a tensile strength of 415 Pa or more,

whether or not equipped with prisms/lens, and

whether or not fitted with connector(s),

Versions

1. 2019-06-13