Council Regulation (EU) 2019/999 of 13 June 2019 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Grade B
mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.
Address https://gelex.eu/eli/EU/regulation/2019/999@2019-06-13/en
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are unavailable in the Union and thereby avoid any disturbances on the market for those products, autonomous Common Customs Tariff (CCT) duties on those products have been suspended by Council Regulation (EU) No 1387/2013. Those products can be imported into the Union at reduced or zero duty rates.
(2) The Union production of 97 products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to suspend totally the autonomous CCT duties on those products.
(3) It is necessary to modify the conditions for the suspension of autonomous CCT duties for 47 products listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends on the market.
(4) It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for 26 of the products that are listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be deleted. Moreover, with a view to promoting integrated battery production in the Union and in accordance with the communication from the Commission entitled Europe on the Move — Sustainable Mobility for Europe: safe, connected, and clean, the suspensions for 20 additional products listed in that Annex should be withdrawn. Furthermore, another 50 suspensions should be deleted from that Annex as a result of the implementation of the agreement in the form of the Declaration on the Expansion of Trade in Information Technology Products, which reduced the duty rate for the products concerned to zero.
(5) Regulation (EU) No 1387/2013 should therefore be amended accordingly.
(6) In order to avoid any interruption of the application of the autonomous suspension scheme and to comply with the guidelines set out in the communication from the Commission concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2019. This Regulation should therefore enter into force as a matter of urgency,
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Regulation (EU) No 1387/2013 is amended as follows:
(1) all asterisks in the table and the endnote (*), containing the text New or amended position or position with prolonged validity., are deleted;
(2) in the table, the rows for the products for which the CN and TARIC codes are set out in Annex I to this Regulation are deleted;
(3) the rows for the products listed in Annex II to this Regulation are inserted into the table according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively.
Article 2
This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union. It shall apply from 1 July 2019.
This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 13 June 2019. For the Council The President M.C. Budăi
ANNEX
ANNEX I
In the table set out in the Annex to Regulation (EU) No 1387/2013, the rows relating to suspensions for the products identified by the following CN and TARIC codes are deleted: CN code TARIC ex28269080 10 ex28269080 20 ex29209010 15 ex29209010 25 ex29209010 35 ex29211999 25 ex29269070 12 ex32089019 20 ex35069110 10 ex35069110 40 ex35069110 50 ex35069190 10 ex35069190 40 ex35069190 50 ex35069190 60 ex37013000 20 ex37013000 30 ex37019900 10 ex37079029 10 ex37079029 40 ex37079029 50 ex38011000 10 ex38019000 30 ex38069000 10 ex38123990 35 ex38151990 87 ex38159090 22 ex38249992 37 ex39041000 20 ex39072020 40 ex39094000 60 ex39211900 35 ex39211900 40 ex56031290 50 ex56031290 70 ex56031390 70 ex56039290 40 ex56039390 10 ex74101100 10 ex81082000 40 ex81082000 60 ex84679900 10 ex84798997 50 ex84798997 80 ex84799020 80 ex84799070 80 ex84818059 30 ex84818059 40 ex84818059 50 ex84818059 60 ex84821010 40 ex84821090 30 ex85013100 55 ex85013200 60 ex85013300 15 ex85044082 40 ex85044082 50 ex85044088 30 ex85044090 15 ex85044090 25 ex85044090 30 ex85044090 40 ex85044090 50 ex85044090 70 ex85044090 80 ex85045095 20 ex85045095 40 ex85045095 50 ex85045095 60 ex85045095 70 ex85045095 80 ex85049011 10 ex85049011 20 ex85049099 20 ex85069000 10 ex85071020 80 ex85075000 20 ex85075000 40 ex85076000 15 ex85076000 20 ex85076000 23 ex85076000 25 ex85076000 30 ex85076000 33 ex85076000 43 ex85076000 45 ex85076000 47 ex85076000 50 ex85076000 53 ex85076000 60 ex85076000 71 ex85076000 80 ex85076000 85 ex85078000 20 ex85079080 60 ex85182995 30 ex85182995 40 ex85183095 20 ex85184080 91 ex85184080 92 ex85184080 93 ex85189000 30 ex85189000 35 ex85189000 40 ex85189000 50 ex85189000 60 ex85189000 80 ex85229049 60 ex85229049 65 ex85229080 30 ex85229080 65 ex85229080 80 ex85229080 84 ex85229080 97 ex85261000 20 ex85279900 10 ex85279900 20 ex85291080 60 ex85291080 70 ex85299065 15 ex85299065 25 ex85299065 40 ex85299092 57 ex85359000 30 ex85364900 30 ex85365011 35 ex85365011 40 ex85365019 93 ex85365080 81 ex85365080 82 ex85365080 83 ex85365080 97 ex85459090 30 ex90012000 10 ex90012000 20 ex90019000 55 ex90021100 15 ex90021100 25 ex90021100 35 ex90021100 45 ex90021100 55 ex90021100 65 ex90021100 75 ex90021900 10 ex90021900 20 ex90021900 30 ex90021900 40 ex90021900 50 ex90021900 60 ex90021900 70 ex90271090 10 ex90292031 10 ex90299000 20 ex90303100 20
ANNEX II
In the table set out in the Annex to Regulation (EU) No 1387/2013, the following rows are inserted according to the order of the CN and TARIC codes indicated in the first and second columns of that table, respectively: CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review 15162010 Hydrogenated castor oil, so called opal-wax 0 % — 31.12.2023 ex28181011 10 Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,0 0 % — 31.12.2023 ex28269080 10 Lithium hexafluorophosphate (1-) (CAS RN 21324-40-3) 0 % — 31.12.2019 ex28281000 10 Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more 0 % — 31.12.2023 ex29053200 10 (2S)-propane-1,2-diol (CAS RN 4254-15-3) 0 % — 31.12.2023 ex29093090 35 1-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene (CAS RN 1103738-29-9) 0 % — 31.12.2023 ex29109000 25 Phenyloxirane (CAS RN 96-09-3) 0 % — 31.12.2023 ex29122900 55 Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5) 0 % — 31.12.2023 ex29159070 15 2,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9) 0 % — 31.12.2023 ex29163990 57 2-Phenylprop-2-enoic acid (CAS RN 492-38-6) 0 % — 31.12.2023 ex29183000 25 (E)-1-ethoxy-3-oxobut-1-en-1-olate; 2-methylpropan-1-olate; titanium(4+) (CAS RN 83877-91-2) 0 % — 31.12.2023 ex29189990 33 Vanillic Acid (CAS RN 121-34-6) containing 0 % — 31.12.2023 ex29209010 15 Ethyl methyl carbonate (CAS RN 623-53-0) 0 % — 31.12.2019 ex29209010 25 Diethyl carbonate (CAS RN 105-58-8) 0 % — 31.12.2019 ex29209010 35 Vinylene carbonate (CAS RN 872-36-6) 0 % — 31.12.2019 ex29209070 20 Diethyl phosphorochloridate (CAS RN 814-49-3) 0 % — 31.12.2023 ex29214300 70 5-Bromo-4-fluoro-2-methylaniline (CAS RN 627871-16-3) 0 % — 31.12.2023 ex29214500 30 (5 or 8)-Aminonaphthalene-2-sulphonic acid (CAS RN 51548-48-2) 0 % — 31.12.2023 ex29214500 80 2-Aminonaphthalene-1-sulphonic acid (CAS RN 81-16-3) 0 % — 31.12.2023 ex29214900 35 2-Ethylaniline (CAS RN 578-54-1) 0 % — 31.12.2023 ex29221900 55 3-Aminoadamantan-1-ol (CAS RN 702-82-9) 0 % — 31.12.2023 ex29222900 33 o-Phenetidine (CAS RN 94-70-2) 0 % — 31.12.2023 ex29239000 65 N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 % 0 % — 31.12.2023 ex29241900 75 (S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic acid (CAS RN 207305-60-0) 0 % — 31.12.2023 ex29242970 67 N,N′-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487-09-2) 0 % — 31.12.2023 ex29242970 70 N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3-hydroxypropan-2-yl]-L-alaninamide 0 % — 31.12.2023 ex29269070 60 Cyfluthrin (ISO) (CAS RN 68359-37-5) or beta-cyfluthrin (ISO) (CAS RN 1820573-27-0) with a purity by weight of 95 % or more 0 % — 31.12.2019 ex29309098 38 Allyl isothiocyanate (CAS RN 57-06-7) 0 % — 31.12.2023 ex29309098 50 3-Mercaptopropionic acid (CAS RN 107-96-0) 0 % — 31.12.2023 ex29321900 65 Tefuryltrione (ISO) (CAS RN 473278-76-1) 0 % — 31.12.2023 ex29322090 75 3-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520-45-6) 0 % — 31.12.2023 ex29329900 27 (2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) 0 % — 31.12.2023 ex29331990 65 4-Bromo-1-(1-ethoxyethyl)-1H-pyrazole (CAS RN 1024120-52-2) 0 % — 31.12.2023 ex29333999 56 2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8) 0 % — 31.12.2023 ex29333999 59 Chlorpyrifos-Methyl (ISO) (CAS RN 5598-13-0) 0 % — 31.12.2023 ex29333999 61 6-Bromopyridin-2-amine (CAS RN 19798-81-3) 0 % — 31.12.2023 ex29333999 62 Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4) 0 % — 31.12.2023 ex29333999 64 Methyl 1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate (CAS RN 960316-73-8) 0 % — 31.12.2023 ex29333999 68 1-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319-02-8) with a purity by weight of 85 % or more 0 % — 31.12.2023 ex29334990 80 Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1) 0 % — 31.12.2020 ex29335400 10 5,5′-(1,2-diazenediyl)bis [2,4,6 (1H, 3H, 5H)-pyrimidinetrione] (CAS RN 25157-64-6) 0 % — 31.12.2023 ex29335995 63 1-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0) 0 % — 31.12.2023 ex29336980 27 Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0) 0 % — 31.12.2023 ex29339980 58 Ipconazole (ISO) (CAS RN 125225-28-7) with a purity by weight of 90 % or more 0 % — 31.12.2023 ex29339980 59 Hydrates of Hydroxybenzotriazole (CAS RN 80029-43-2 and CAS RN 123333-53-9) 0 % — 31.12.2023 ex29339980 61 (1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1) 0 % — 31.12.2023 ex29339980 63 L-Prolinamide (CAS RN 7531-52-4) 0 % — 31.12.2023 ex29339980 68 5-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2′,1′-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9) 0 % — 31.12.2023 ex29349990 78 [(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] (morpholino)methanone (CAS RN 1103738-19-7) 0 % — 31.12.2023 ex29349990 80 2-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one (CAS RN 119344-86-4) 0 % — 31.12.2023 ex29359090 33 4-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3) 0 % — 31.12.2023 ex29359090 37 1,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2) 0 % — 31.12.2023 ex29359090 60 4-[(3-Methylphenyl)amino]pyridine-3-sulphonamide (CAS RN72811-73-5) 0 % — 31.12.2023 ex32041700 31 Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight 0 % — 31.12.2023 ex32050000 20 Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight: 0 % — 31.12.2023 ex32050000 30 Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight: 0 % — 31.12.2023 ex32089019 55 Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent 0 % — 31.12.2020 ex35069190 10 Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) 0 % — 31.12.2023 ex35069190 40 Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330) 0 % — 31.12.2019 ex35069190 50 Preparation containing by weight: dissolved in: 0 % — 31.12.2020 ex35069190 60 Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 25 % or more but not more than 35 % 0 % l 31.12.2022 ex38123990 35 Mixture containing by weight: 0 % — 31.12.2023 ex38151200 20 Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with 0 % — 31.12.2023 ex38151200 30 Catalyst for use in the production of motor vehicles 0 % — 31.12.2023 ex38159090 43 Catalyst in powder form consisting by weight of 0 % — 31.12.2022 ex38249992 31 Liquid crystal mixtures for use in the manufacture of LCD (liquid crystal display) modules 0 % — 31.12.2023 ex38249992 37 Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085-02-4) 0 % — 31.12.2023 ex38249996 33 Buffer cartridge not exceeding 8000 ml containing: 0 % — 31.12.2023 ex39046980 20 Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2) 0 % — 31.12.2023 ex39046980 30 Copolymer of tetrafluoroethylene, hexafluoropropene and ethene 0 % — 31.12.2023 ex39072020 40 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3600 0 % — 31.12.2023 ex39209959 30 Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite 0 % — 31.12.2023 ex39211900 40 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: of a kind used for the manufacture of alkaline battery separators 0 % — 31.12.2019 ex39263000 40 Plastic internal door handle used in the manufacture of motor vehicles 0 % — 31.12.2023 ex54024400 10 Synthetic elastomeric filament yarn: for use in the manufacture of disposable hygiene products of heading 9619 0 % — 31.12.2023 ex70060090 40 Plates of sodalime glass of STN (Super Twisted Nematic) quality having: of a kind used in the manufacture of LCD (liquid crystal display) modules 0 % — 31.12.2023 ex70194000 ex70195200 70 30 E-fibre glass fabrics: for the exclusive use in the manufacture of prepregs and copper clad laminates 0 % — 31.12.2021 ex70195200 40 Epoxy resin coated glass woven fabric containing by weight: 0 % — 31.12.2023 ex74101100 ex85079080 ex85459090 10 60 30 Roll of laminate foil of graphite and copper, with: for use in the manufacture of lithium-ion electric rechargeable batteries 0 % — 31.12.2019 ex76072090 10 Aluminium foil, in rolls: for use in the manufacture of lithium-ion battery cell pouches 0 % — 31.12.2019 81041100 Unwrought magnesium, containing at least 99,8 % by weight of magnesium 0 % — 31.12.2023 ex81082000 40 Titanium alloy ingot, containing alloy elements by weight of: 0 % p/st 31.12.2020 ex81082000 60 Titanium alloy ingot, containing alloy elements by weight of: 0 % p/st 31.12.2020 ex83012000 10 Mechanical or electromechanical steering column lock: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2023 ex83023000 10 Support bracket for an exhaust system: for use in the manufacture of exhaust systems for automobiles 0 % — 31.12.2023 ex84099100 60 The air intake module for engine cylinders consisting of: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2023 ex84099100 70 Inlet manifold, exclusively for use in the manufacture of the motor vehicles with: 0 % — 31.12.2023 ex84099900 65 The exhaust gas recirculation assembly consisting of: for use in the manufacture of diesel engines of motor vehicles 0 % — 31.12.2023 ex84141025 30 Tandem pump consisting of: for use in the manufacture of engines of motor vehicles 0 % — 31.12.2023 ex84141089 30 Electric vacuum pump with: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2023 ex84143089 30 Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 87 0 % — 31.12.2023 ex84145935 20 Radial fan, with: 0 % — 31.12.2023 with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems ex84679900 10 Mechanical switches for connecting electrical circuits, with: for use in the manufacture of machines falling within heading 8467 0 % p/st 31.12.2019 ex84818059 30 Two-way flow control valve with housing, with: 0 % — 31.12.2022 ex84818059 40 Flow-control valve 0 % — 31.12.2022 ex84818059 50 Electromagnetic valve for quantity control with 0 % — 31.12.2022 ex84818059 60 Electromagnetic valve for quantity control 0 % — 31.12.2022 ex84818079 ex84818099 30 30 Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: for use in the manufacture of air conditioners 0 % — 31.12.2023 ex84842000 20 Mechanical face sealing device made of two movable rings (one ceramic mating, having a thermal conductivity lower than 80W/Mk and the other carbon sliding), one spring and a nitrile sealant on the external side, of a kind used in manufacturing circulation pumps of cooling systems in motor vehicles 0 % — 31.12.2023 ex85011010 30 Motors for air pumps, with: for use in the manufacture of pneumatic support and ventilation systems for car seats 0 % — 31.12.2023 ex85013100 ex85013200 55 40 DC motor with or without commutator, with for driving hand-held power tools or lawn mowers 0 % — 31.12.2023 ex85013300 25 AC traction motor of an output of 75 kW or more but not more than 375 kW, with: for use in the manufacture of electric vehicles 0 % — 31.12.2019 ex85030099 55 Stator for brushless motor, with: of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums 0 % p/st 31.12.2020 ex85069000 10 Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) 0 % — 31.12.2023 ex85076000 13 Prismatic lithium-ion electric accumulators with: for use in the manufacture of rechargeable electric vehicle batteries 0 % — 31.12.2019 ex85076000 15 Cylindrical lithium-ion-accumulators or modules with: for use in the manufacture of electric bicycles 0 % — 31.12.2019 ex85076000 18 Rectangular lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with: for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703 0 % — 31.12.2019 ex85076000 30 Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries 0 % — 31.12.2019 ex85076000 33 Lithium-ion accumulator, with: 0 % — 31.12.2019 ex85076000 50 Modules for the assembly of batteries of ion lithium electric accumulators with: 0 % — 31.12.2019 ex85076000 71 Lithium-ion rechargeable batteries, with: 0 % — 31.12.2019 ex85076000 85 Lithium-ion Rectangular modules for incorporation in lithium-ion rechargeable batteries: 0 % — 31.12.2019 ex85079030 20 Safety Reinforced Separator designed to separate cathode and anode in lithium-ion electric accumulators for use in the manufacture of lithium-ion electric accumulators for motor vehicle batteries 0 % — 31.12.2019 ex85299065 25 Printed circuit board assembly comprising: for use in the manufacture of home entertainment systems 0 % p/st 31.12.2019 ex85299065 28 Electronic assembly comprising at least a printed circuit board with: 0 % p/st 31.12.2020 ex85299065 40 Printed circuit board subassembly, comprising: for use in the manufacture of home entertainment systems 0 % p/st 31.12.2019 ex85299092 52 LCD module, glass or plastic covered and optically bonded, with 0 % — 31.12.2023 of a kind used as a driver information display in motor vehicles of Chapter 87 ex85299092 54 LCD display with: for use in the manufacture of motor vehicles of Chapter 87 0 % — 31.12.2023 ex85299092 57 Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players 0 % p/st 31.12.2021 ex85359000 30 Semiconductor module switch in a casing: 0 % p/st 31.12.2020 ex85371091 57 Programmable memory control board with: for use in the manufacture of 3D printers 0 % — 31.12.2023 ex85371091 59 Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including: 0 % — 31.12.2023 ex85371091 63 Electronic control units able to control automatic continuous variable transmission for passenger vehicles including: 0 % — 31.12.2023 ex85371091 67 Electronic Engine Control Unit (ECU) with: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2023 ex87084020 ex87084050 60 50 Automatic transmission assembly with rotary gear shifter with: with dimensions of: for use in the manufacture of the vehicles in heading 87 0 % — 31.12.2023 ex87085020 ex87085099 ex87089910 ex87089997 60 15 45 65 Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising at least: 0 % — 31.12.2019 ex87085020 ex87085099 65 20 Intermediate steel shaft connecting the gearbox with semi-axle with: for use in the manufacture of goods of Chapter 87 0 % — 31.12.2023 ex87085020 ex87085099 70 25 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: 0 % — 31.12.2023 ex87085020 ex87085099 75 35 Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: capable of working at constant speed at variable articulation angle not higher than 50 degrees 0 % — 31.12.2023 ex87088099 20 Aluminium suspension link arm, with dimensions of: equipped with at least two bushed holes made of aluminium alloy with the following characteristics: 0 % — 31.12.2023 ex87089299 10 Exhaust system inner liner: for use in the manufacture of exhaust systems for automobiles 0 % — 31.12.2023 ex87089299 20 Pipe for guiding exhaust gases from the combustion engine: for use in the manufacture of exhaust systems for automobiles 0 % — 31.12.2023 ex87089299 30 Exhaust system end cover: for use in the manufacture of exhaust systems for automobiles 0 % — 31.12.2023 ex90019000 55 Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut 0 % — 31.12.2023 ex90021100 15 Infrared lens with motorised focus adjustment, for use in the manufacture of thermal imaging cameras, infrared binoculars, weapons scopes 0 % — 31.12.2020 ex90021100 18 Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with: of a kind used for the production of CMOS (Complementary metal–oxide-semiconductor) automotive cameras 0 % — 31.12.2023 ex90021100 25 Infrared optical unit composed of assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 35 Infrared optical unit composed of assembled on a machined aluminium alloy support, of kind a used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 45 Infrared optical unit of a kind used for thermal cameras 0 % — 31.12.2021 ex90021100 55 Infrared optical unit composed of assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 65 Infrared optical unit of a kind used for thermal imaging cameras 0 % — 31.12.2021 ex90021100 75 Infrared optical unit composed of assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras 0 % — 31.12.2021 ex90292031 ex90299000 20 30 Clustered instrument panel with the microprocessor control board, with or without stepping motors, and LED indicators showing at least: communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2019
not more than 10 ppm of Palladium (CAS RN 7440-05-3),
not more than 10 ppm of bismuth (CAS RN 7440-69-9),
not more than 14 ppm of formaldehyde (CAS RN 50-00-0),
not more than 1,3 % by weight of 3,4-dihydroxybenzoic acid (CAS RN 99-50-3),
not more than 0,5 % by weight of vanillin (CAS RN 121-33-5)
16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2),
65 % or more but no more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)
16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1),
65 % or more but no more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)
15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and
10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,
Methyl ethyl ketone (CAS RN 78-93-3),
Heptane (CAS RN 142-82-5), and
Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)
25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9),
not more than 20 % of other organic compounds,
on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)
a diameter of 1,4 mm or more but not more than 2,0 mm, and
a platinum content by weight of 0,2 % or more but not more than 0,5 %
containing 0,3 gram per litre or more, but not more than 7 gram per litre of precious metals,
deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/zirconium oxide, the honeycomb structure having,
a nickel content of 1,26 % by weight or more, but not more than 1,29 % by weight,
62 cells per cm2 or more, but not more than 140 cells per cm2,
a diameter of 100 mm or more, but not more than 120 mm, and
a length of 60 mm or more, but not more than 150 mm,
92,50 % (± 2) % titanium dioxide (CAS RN 13463-67-7),
5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and
2,5 % (± 1,5) % sulphur trioxide (CAS RN 7446-11-9)
0,05 % or more but not more than 0,1 % by weight of 5-Chloro-2-methyl-2,3-dihydroisothiazol-3-one (CAS RN 55965-84-9), and
0,05 % or more but not more than 0,1 % by weight of 2-Methyl-2,3-dihydroisothiazol-3-one (CAS RN 2682-20-4) as a biostatic
a width of 98 mm or more but not more than 170 mm,
a thickness of 15 μm or more but not more than 36 μm,
untwisted or with a twist not exceeding 50 turns per metre, measuring 300 dtex or more but not more than 1000 dtex,
composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 3-methyltetrahydrofuran,
a length of 300 mm or more but not more than 600 mm,
a width of 300 mm or more but not more than 600 mm,
a thickness of 0,5 mm or more but not more than 1,1 mm,
an indium-tin-oxide coating with a resistance of 80 Ohms or more, but not more than 160 Ohms on one side,
a multi layer anti-reflection-coating on the other side, and
machined (chamfered) edges,
having a weight of 20 g/m2 or more, but not more than 214 g/m2,
impregnated with silane,
in rolls,
having a humidity content by weight of 0,13 % or less, and
having not more than 3 hollow fibres out of 100000 fibres,
91 % or more but not more than 93 % of glass fibres,
7 % or more but not more than 9 % of epoxy resin
a width of 610 mm or more but not more than 620 mm, and
a diameter of 690 mm or more but not more than 710 mm,
coated with polypropylene on one side and with polyamide on the other side with adhesive layers between,
with a width of 200 mm or more, but not more than 400 mm,
with a thickness of 0,138 mm or more, but not more than 0,168 mm,
with a height of 17,8 cm or more, a length of 180 cm or more and a width of 48,3cm or more,
a weight of 680 kg or more,
3 % or more but not more than 6 % of aluminium,
2,5 % or more but not more than 5 % of tin,
2,5 % or more but not more than 4,5 % of zirconium,
0,2 % or more but not more than 1 % of niobium,
0,1 % or more but not more than 1 % of molybdenum,
0,1 % or more but not more than 0,5 % of silicon
with a diameter of 63,5 cm or more and a length of 450 cm or more,
a weight of 6350 kg or more,
5,5 % or more but not more than 6,7 % of aluminium,
3,7 % of more but not more than 4,9 % of vanadium
with a height of 10,5 cm (± 3 cm),
with a width of 6,5 cm (± 3 cm),
in a metal housing,
whether or not with a holder,
with a thickness of 0,7 mm or more but not more than 1,3 mm,
of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,
whether or not with mounting holes,
a suction pipe,
a pressure sensor,
an electric throttle,
hoses,
brackets,
a width of 40 mm or more but not more than 70 mm,
valves length of 250 mm or more but not more than 350 mm,
air volume of 5,2 litres, and
an electrical flow control system that provides maximum performance at more than 3200 rpm
a control unit,
an air throttle,
an intake pipe,
an outlet hose,
an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1000 revolutions per minute,
vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of – 666 mbar in 6 seconds at 750 revolutions per minute,
Controller Area Network (CAN bus),
whether or not with a rubber hose,
a connecting cable with connector,
a mounting bracket,
a dimension of 25 mm (height) × 85 mm (width) × 85 mm (depth),
a weight of 120 g,
a rated voltage of 13,6 VDC (direct current voltage),
an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),
a rated current of 1,1 A (TYP),
a rated power of 15 W,
a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow),
an air flow of not more than 17,5 litre/s,
an air pressure of not more than16 mm H2O ≈ 157 Pa,
an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), and
a voltage of 14,4 V or more but not more than 42 V,
an amperage of 10 A or more but not more than 42 A,
at least 5, but not more than 10 outlet holes with at least 0,09 mm, but not more than 0,2 mm diameter,
at least 550 cm3/minute, but not more than 2000 cm3/minute flow rate,
at least 19, but not more than 300 MPa operating pressure
made of steel,
with an outlet hole with a diameter of at least 0,1 mm, but not more than 0,3 mm,
with an inlet hole with a diameter of at least 0,4 mm, but not more than 1,3 mm,
with chromium nitride coating,
with a surface roughness of Rp 0,4
a plunger,
a solenoid with a of coil resistance of at least 2,6 Ohm, but not more than 3 Ohm
with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH
a withstanding pressure of the valve body of 6,3 MPa,
a leakage ratio of less than 1,6 g/a,
an impurity ratio of less than 1,2 mg/PCS,
an airtight pressure of the valve body of 4,2 MPa,
operating voltage of 9 VDC or more but not more than 24 VDC,
operating temperature range of – 40 °C or more but not more than 80 °C,
an output not exceeding 18 W,
an external diameter of 24,2 mm or more, but not more than 140 mm,
a rated speed of 3300 rpm or more, but not more than 26200 rpm,
a rated supply voltage of 3,6 V or more, but not more than 230 V,
an output power of more than 37,5 W, but not more than 2400 W,
a free load current of not more than 20,1 A,
a maximum efficiency of 50 % or more,
a torque output of 200 Nm or more but not more than 400 Nm,
a power output of 50 kW or more but not more than 200 kW, and
a speed of not more than 15000 rpm,
an internal diameter of 206,6 mm (± 0,5),
an external diameter of 265,0 mm (± 0,2), and
a width of 37,2 mm or more but not more than 47,8 mm,
a width of 173,0 mm (± 0,4 mm),
a thickness of 45,0 mm (± 0,4 mm),
a height 125,0 mm (± 0,3 mm),
a nominal voltage of 3,67 V (± 0,01 V), and
a nominal capacity of 94 Ah and/or 120 Ah,
a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,
a nominal voltage of 36 V or more, but not more than 48 V,
a power of 300 Wh or more, but not more than 648 Wh,
a length of not more than 1600 mm,
a width of not more than 448 mm,
a height of not more than 395 mm,
a weight of 125 kg or more but not more than 135 kg,
a nominal voltage of 280 V or more but not more than 400 V,
a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,
a charging voltage of 110 V or more but not more than 230 V, and
containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,
a length of 150 mm or more, but not more than 1000 mm,
a width of 100 mm or more, but not more than 1000 mm,
a height of 200 mm or more, but not more than 1500 mm,
a weight of 75 kg or more, but not more than 200 kg,
a nominal capacity not less than 150 Ah and not more than 500 Ah
a length of 298 mm or more, but not more than 408 mm,
a width of 33,5 mm or more, but not more than 209 mm,
a height of 138 mm or more, but not more than 228 mm,
a weight of 3,6 kg or more, but not more than 17 kg, and
a power of 458 Wh or more, but not more than 2158 Wh
a length of 700 mm or more, but not more than 2820 mm,
a width of 935 mm or more, but not more than 1660 mm,
a height of 85 mm or more, but not more than 700 mm,
a weight of 250 kg or more, but not more than 700 kg,
a power of not more than 175 kWh
of a length of 300 mm or more, but not more than 350 mm,
of a width of 79,8 mm or more, but not more than 225 mm,
of a height of 35 mm or more, but not more than 168 mm,
of a weight of 3,95 kg or more, but not more than 8,85 kg,
with a rating of 66,6 Ah or more, but not more than 129 Ah
a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,
a microprocessor capable of receiving remote control messages and controlling the tuner chipset,
processors for multi-media applications and video signal processing,
FPGA (Field Programmable Gate Array),
Flash memory,
operating memory,
USB-interface,
with or without HDMI, VGA- and RJ-45 interfaces,
sockets and plugs for connecting a LCD-display, a LED lighting and a control panel
a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,
a radio frequency (RF) remote control receiver,
an infrared remote control signal transmitter,
a SCART signal generator,
a TV state sensor,
a diagonal measurement of the screen of 12 cm or more but not more than 31 cm,
LED backlighting,
a printed circuit board with EEPROM (Electrically Erasable Programmable Read-Only Memory), microcontroller, timing controller and other active and passive components,
a plug for power supply and CAN (Controller Area Network) and LVDS (Low Voltage Differential Signalling) interfaces,
whether or not with electronic components to generate additional control indicators for vehicle information on the display,
with or without a touch screen,
without a signal processing module,
in a housing with additional LED indicators for warning lights,
with or without a gear shift indicator and a photo sensor,
a touch panel,
at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings,
a diagonal screen measurement of 15 cm or more but not more than 21 cm,
a backlight,
a LVDS (Low Voltage Differential Signalling) and a power supply connector,
consisting of an IGBT transistor chip and a diode chip on one or more lead frames,
for a voltage of 600 V or 1200 V
4 or more stepper motor drivers,
4 or more outputs with MOSFET transistors,
a main processor,
3 or more inputs for temperature sensors,
for a voltage of 10 V or more but not more than 30 V,
a printed circuit board with programmable memory controller,
one single connector, and
working at 12 V
a printed circuit board with programmable memory controller,
a metallic housing,
one single connector,
working at 12 V
a printed circuit board (PCB),
12 Volts voltage,
reprogrammable,
a micro-processor that can control, evaluate and manage support service functions in cars (injection and ignition advance values of fuel, fuel and air flow rate),
aluminium casting housing,
differential gear,
9 Speed automatic,
electronic range select gear selection system,
a width of 330 mm or more but not more than 420 mm,
a height of 380 mm or more but not more than 450 mm,
a length of 580 mm or more but not more than 690 mm,
an actuator, and
an interior distribution by chain
a length of 300 mm or more but not more than 650 mm,
a spline end on both sides,
whether or not with a pressed bearing in the case,
whether or not with a holder,
an outer diameter of 67,0 mm or more but not more than 84,5 mm,
3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,
sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,
spline with 21 teeth or more but not more than 35,
bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,
an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,
a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and
with a grease compartment,
a height of 50 mm or more but not more than 150 mm,
a width of 10 mm or more but not more than 100 mm,
a length of 100 mm or more but not more than 600 mm,
a mass of 1000 g or more but not more than 3000 g,
a tensile strength of 200 mPa or more,
a strength of 19 kN or more,
a stiffness of 5 kN/mm or more but not more than 9 kN/mm,
a frequency of 400 Hz or more but not more than 600 Hz
with a wall thickness of 0,7 mm or more but not more than 1,3 mm,
made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088,
whether or not with mounting holes,
with a diameter of 40 mm or more but not more than 100 mm,
with a length of 90 mm or more but not more than 410 mm,
with a wall thickness of 0,7 mm or more but not more than 1,3 mm,
of stainless steel,
with a wall thickness of 0,7 mm or more but not more than 1,3 mm,
made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,
whether or not with inner liner,
whether or not with surface treatment,
using wavelengths of 3 μm or more but not more than 5 μm,
providing a clear picture from 50 m to infinity,
with fields of vision sizes of 3° × 2,25° and 9° × 6,75°,
with a weight of not more than 230 g,
with a length of not more than 88 mm,
with a diameter of not more than 46 mm,
athermalized,
a horizontal field of view range to a maximum of 120 deg,
a diagonal field of view range to a maximum of 92 deg,
a focal length to a maximum of 7,50 mm,
a relative aperture of a maximum of F/2,90,
a maximum diameter of 22 mm,
a monocrystalline silicon lens with a diameter of 84 mm (± 0,1 mm), and
a monocrystalline germanium lens with a diameter of 62 mm (± 0,05 mm),
a silicon lens with a diameter of 29 mm (± 0,05 mm), and
a monocrystalline calcium fluoride lens with a diameter of 26 mm (± 0,05 mm),
with a silicon lens of a diameter of 62 mm (± 0,05 mm),
mounted on a machined aluminium alloy support,
a germanium lens with a diameter of 11 mm (± 0,05 mm),
a monocrystalline calcium fluoride lens with a diameter of 14 mm (± 0,05 mm), and
a silicon lens with a diameter of 17 mm (± 0,05 mm),
with a silicon lens with a diameter of 26 mm (± 0,1 mm),
mounted on a machined aluminium alloy support,
a germanium lens with a diameter of 19 mm (± 0,05 mm),
a monocrystalline calcium fluoride lens with a diameter of 18 mm (± 0,05 mm),
a germanium lens with a diameter of 20,6 mm (± 0,05 mm),
speed,
engine revolutions,
engine temperature,
the fuel level,