Address https://gelex.eu/eli/EU/regulation/2020/2231@2020-12-18/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
3. ANNEX
4. ANNEX

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances in the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2)(c) of Regulation (EU) No 952/2013 of the European Parliament and of the Council (CCT duties) on those products have been suspended by Council Regulation (EU) No 1387/2013. Those products can be imported into the Union at reduced or zero duty rates.

(2) The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to grant a complete suspension of the CCT duties on those products.

(3) With a view to promoting integrated battery production in the Union in accordance with the communication from the Commission of 17 May 2018 entitled Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean, a partial suspension of the CCT duties should be granted in respect of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. In addition, only a partial suspension of the CCT duties should be granted in respect of certain products that are currently subject to complete suspensions. The date for the mandatory review of those suspensions should be 31 December 2021, in order for that review to take into account the evolution of the battery sector in the Union.

(4) It is necessary to amend the product description, classification and end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market.

(5) A review has been undertaken of certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013. New dates should therefore be set for their next mandatory review.

(6) It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be deleted. Moreover, according to the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, for practical reasons requests for tariff suspensions or quotas where the amount of uncollected customs duty is estimated to be less than EUR 15000 per year cannot be taken into consideration. The suspensions for products which do not reach that threshold, as indicated by the mandatory review, should therefore be deleted from the Annex to Regulation (EU) No 1387/2013.

(7) Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(8) In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 January 2021. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2021.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 18 December 2020. For the Council The President M. Roth

ANNEX

ANNEX

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1) the entries with the following serial numbers are deleted: 0.3338, 0.3662, 0.4675, 0.4795, 0.4856, 0.4891, 0.4902, 0.4903, 0.4905, 0.4908, 0.4911, 0.4920, 0.4926, 0.4935, 0.4939, 0.4943, 0.4973, 0.4995, 0.5012, 0.5022, 0.5039, 0.5043, 0.5052, 0.5053, 0.5067, 0.5092, 0.5103, 0.5123, 0.5125, 0.5126, 0.5311, 0.5498, 0.5953, 0.6036, 0.6068, 0.6087, 0.6450, 0.6527, 0.6591, 0.6592, 0.6595, 0.6596, 0.6597, 0.6606, 0.6607, 0.6608, 0.6610, 0.6615, 0.6616, 0.6619, 0.6626, 0.6636, 0.6639, 0.6651, 0.6653, 0.6665, 0.6676, 0.6694, 0.6697, 0.6704, 0.6705, 0.6715, 0.6724, 0.6727, 0.6731, 0.6733, 0.6735, 0.6743, 0.6744, 0.6755, 0.6756, 0.6758, 0.6760, 0.6768, 0.6775, 0.6776, 0.6778, 0.6780, 0.6785, 0.6786, 0.6787, 0.6788, 0.6795, 0.6798, 0.6803, 0.6807, 0.6811, 0.6832, 0.6833, 0.6834, 0.6838, 0.6841, 0.6883, 0.6890, 0.6895, 0.6900, 0.6902, 0.6909, 0.6914, 0.6916, 0.6918, 0.6928, 0.6941, 0.6942, 0.6943, 0.6944, 0.6953, 0.6954, 0.7040, 0.7222, 0.7293, 0.7558, 0.7560, 0.7697, 0.7715 and 0.7855;

(2) the following entries replace those entries that have the same serial numbers: Serial Number CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review 0.6748 ex07095910 10 Fresh or chilled chanterelles for treatment other than simple repacking for retail sale 0 % - 31.12.2025 0.2864 ex15119019 ex15119091 ex15131110 ex15131930 ex15132110 ex15132930 20 20 20 20 20 20 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: 0 % - 31.12.2021 0.6789 ex15121910 10 Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of 0 % - 31.12.2022 0.5004 ex20089948 94 Mango puree: used in the manufacture of products of drink industry 6 % - 31.12.2022 0.4709 ex20089949 ex20089999 30 40 Seedless boysenberry puree not containing added spirit, whether or not containing added sugar 0 % - 31.12.2025 0.6723 ex20089991 20 Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking 0 % - 31.12.2025 0.4992 ex20094192 ex20094199 20 70 Pineapple juice: used in the manufacture of products of drink industry 8 % - 31.12.2025 0.7393 ex27129099 10 Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms 0 % - 31.12.2022 0.6658 ex28051200 10 Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2) 0 % - 31.12.2025 0.4979 28053020 28053030 28053040 Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more 0 % - 31.12.2025 0.6836 ex28112200 15 Amorphous silicon dioxide (CAS RN 60676-86-0) 0 % - 31.12.2022 0.5110 ex28181091 20 Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of: and with less than 50 % of the total weight having a particle size of more than 10 mm 0 % - 31.12.2025 0.6837 ex28183000 20 Aluminium hydroxide (CAS RN 21645-51-2) 0 % - 31.12.2025 0.7897 ex28252000 10 Lithium hydroxide monohydrate (CAS RN 1310-66-3) 2.6 % - 31.12.2021 0.6819 ex28255000 30 Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm 0 % - 31.12.2025 0.5055 ex28261990 10 Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more 0 % - 31.12.2025 0.5090 ex28332980 30 Zirconium sulphate (CAS RN 14644-61-2) 0 % - 31.12.2021 0.6632 ex28402090 10 Zinc borate (CAS RN 12767-90-7) 0 % - 31.12.2025 0.7288 ex28415000 11 Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more 2 % - 31.12.2021 0.4222 ex28419085 10 Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 % 2.7 % - 31.12.2021 0.3419 ex28500020 80 Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more 0 % - 31.12.2024 0.6633 29033921 Difluoromethane (CAS RN 75-10-5) 0 % - 31.12.2025 0.2583 ex29038980 45 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more 2 % - 31.12.2021 0.6611 ex29039980 15 4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4) 0 % - 31.12.2025 0.3409 ex29042000 10 Nitromethane (CAS RN 75-52-5) 0 % - 31.12.2025 0.3391 ex29042000 20 Nitroethane (CAS RN 79-24-3) 0 % - 31.12.2022 0.3408 ex29042000 30 1-Nitropropane (CAS RN 108-03-2) 0 % - 31.12.2025 0.6612 ex29049900 25 Difluoromethanesulphonyl chloride (CAS RN 1512-30-7) 0 % - 31.12.2025 0.6613 ex29049900 35 1-Fluoro-4-nitrobenzene (CAS RN 350-46-9) 0 % - 31.12.2025 0.4934 ex29053995 10 Propane-1,3-diol (CAS RN 504-63-2) 0 % - 31.12.2025 0.6757 ex29062900 40 2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0) 0 % - 31.12.2022 0.6782 ex29081900 40 3,4,5-Trifluorophenol (CAS RN 99627-05-1) 0 % - 31.12.2025 0.6915 ex29081900 50 4-Fluorophenol (CAS RN 371-41-5) 0 % - 31.12.2025 0.6649 ex29093038 30 1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7) 0 % - 31.12.2025 0.5117 ex29093090 30 3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) 0 % - 31.12.2025 0.6614 ex29093090 40 1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7) 0 % - 31.12.2025 0.6783 ex29093090 50 1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6) 0 % - 31.12.2025 0.6784 ex29093090 60 1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2) 0 % - 31.12.2025 0.6927 ex29094980 10 1-Propoxypropan-2-ol (CAS RN 1569-01-3) 0 % - 31.12.2021 0.6660 ex29109000 50 2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1) 0 % - 31.12.2025 0.5135 ex29124900 30 Salicylaldehyde (CAS RN 90-02-8) 0 % - 31.12.2025 0.6678 ex29124900 40 3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0) 0 % - 31.12.2025 0.4933 ex29142900 30 (R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) 0 % - 31.12.2025 0.4932 ex29145000 20 3'-Hydroxyacetophenone (CAS RN 121-71-1) 0 % - 31.12.2025 0.6762 ex29145000 75 7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7) 0 % - 31.12.2022 0.4948 ex29147900 60 4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1) 0 % - 31.12.2021 0.5119 ex29153900 60 Dodec-8-enyl acetate (CAS RN 28079-04-1) 0 % - 31.12.2025 0.5121 ex29153900 65 Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) 0 % - 31.12.2025 0.5120 ex29153900 70 Dodec-9-enyl acetate (CAS RN 16974-11-1) 0 % - 31.12.2025 0.7541 ex29159030 10 Methyl laurate (CAS RN 111-82-0) 0 % - 31.12.2025 0.4954 ex29159070 60 Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) 0 % - 31.12.2025 0.3466 ex29161300 30 Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities 0 % - 31.12.2025 0.4931 ex29162000 60 3-Cyclohexylpropionic acid (CAS RN 701-97-3) 0 % - 31.12.2025 0.4930 ex29163990 30 2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) 0 % - 31.12.2025 0.6794 ex29163990 41 4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8) 0 % - 31.12.2025 0.6661 ex29163990 53 5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0) 0 % - 31.12.2025 0.4918 ex29171980 50 Tetradecanedioic acid (CAS RN 821-38-5) 0 % - 31.12.2025 0.4945 ex29173995 20 Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) 0 % - 31.12.2025 0.6796 ex29173995 25 Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5) 0 % - 31.12.2025 0.3640 ex29173995 30 Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) 0 % - 31.12.2025 0.6800 ex29173995 35 1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8) 0 % - 31.12.2025 0.6814 ex29189990 13 3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0) 0 % - 31.12.2025 0.6901 ex29189990 18 Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9) 0 % - 31.12.2025 0.6747 ex29189990 85 Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more 0 % - 31.12.2025 0.5038 ex29202900 20 Tris(methylphenyl)phosphite (CAS RN 25586-42-9) 0 % - 31.12.2025 0.5045 ex29202900 40 Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) 0 % - 31.12.2025 0.7559 ex29209010 15 Ethyl methyl carbonate (CAS RN 623-53-0) 3.2 % - 31.12.2021 0.6598 ex29209070 80 Bis(pinacolato)diboron (CAS RN 73183-34-3) 0 % - 31.12.2025 0.4917 ex29212900 40 Decamethylenediamine (CAS RN 646-25-3) 0 % - 31.12.2025 0.4862 ex29213099 30 1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6) 0 % - 31.12.2021 0.5124 ex29214300 60 3-Aminobenzotrifluoride (CAS RN 98-16-8) 0 % - 31.12.2025 0.6825 ex29214900 60 2,6-Diisopropylaniline (CAS RN 24544-04-5) 0 % - 31.12.2025 0.6947 ex29221900 35 2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7) 0 % - 31.12.2025 0.6624 ex29222900 30 1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4) 0 % - 31.12.2025 0.6634 ex29222900 63 Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.4956 ex29222900 75 4-(2-Aminoethyl)phenol (CAS RN 51-67-2) 0 % - 31.12.2025 0.4914 ex29223900 20 2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) 0 % - 31.12.2025 0.6761 ex29223900 35 5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5) 0 % - 31.12.2025 0.7853 ex29224985 13 Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more 0 % - 31.12.2024 0.5037 ex29224985 17 Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8) 0 % - 31.12.2025 0.6948 ex29224985 30 Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8) 0 % - 31.12.2021 0.6650 ex29224985 65 Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6) 0 % - 31.12.2025 0.5063 ex29239000 75 Tetraethylammonium hydroxide, in the form of an aqueous solution containing: 0 % - 31.12.2025 0.3689 ex29241900 23 Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more 2 % - 31.12.2021 0.5066 ex29242970 40 N,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) 0 % - 31.12.2025 0.5127 ex29242970 45 Propoxur (ISO) (CAS RN 114-26-1) 0 % - 31.12.2025 0.5069 ex29242970 55 N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5) 0 % - 31.12.2025 0.6767 ex29242970 62 2-Chlorobenzamide (CAS RN 609-66-5) 0 % - 31.12.2025 0.6766 ex29242970 64 N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8) 0 % - 31.12.2025 0.6934 ex29269070 17 Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more 0 % - 31.12.2025 0.6259 ex29269070 26 Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products 0 % - 31.12.2024 0.6871 ex29280090 23 Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.4929 ex29280090 25 Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution 0 % - 31.12.2025 0.6635 ex29280090 50 Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 % 0 % - 31.12.2025 0.5035 ex29309098 10 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) 0 % - 31.12.2022 0.6769 ex29309098 22 Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more 0 % - 31.12.2025 0.6873 ex29309098 26 Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more 0 % - 31.12.2025 0.6617 ex29309098 53 Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9) 0 % - 31.12.2025 0.5114 ex29309098 55 Thiourea (CAS RN 62-56-6) 0 % - 31.12.2025 0.6917 ex29319000 63 Chloroethenyldimethylsilane (CAS RN 1719-58-0) 0 % - 31.12.2021 0.6946 ex29319000 65 Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6) 0 % - 31.12.2021 0.6620 ex29322090 65 Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0) 0 % - 31.12.2025 0.7639 ex29329900 27 (2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more 0 % - 31.12.2023 0.4907 ex29329900 50 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) 0 % - 31.12.2021 0.6771 ex29329900 65 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5) 0 % - 31.12.2025 0.7811 ex29331990 33 Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine 0 % - 31.12.2024 0.6835 ex29332100 55 1-Aminohydantoin hydrochloride (CAS RN 2827-56-7) 0 % - 31.12.2025 0.5115 ex29332100 80 5,5-Dimethylhydantoin (CAS RN 77-71-4) 0 % - 31.12.2025 0.6812 ex29333999 14 N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5) 0 % - 31.12.2022 0.4842 ex29333999 20 Copper pyrithione powder (CAS RN 14915-37-8) 0 % - 31.12.2021 0.6813 ex29333999 26 2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6) 0 % - 31.12.2022 0.5129 ex29333999 85 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) 0 % - 31.12.2025 0.6773 ex29334910 50 1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0) 0 % - 31.12.2025 0.4927 ex29334990 30 Quinoline (CAS RN 91-22-5) 0 % - 31.12.2025 0.6763 ex29335995 21 N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2) 0 % - 31.12.2025 0.6677 ex29335995 47 6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more 0 % - 31.12.2025 0.6774 ex29336980 13 Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more 0 % - 31.12.2025 0.6621 ex29336980 15 2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6) 0 % - 31.12.2025 0.6951 ex29336980 17 Benzoguanamine (CAS RN 91-76-9) 0 % - 31.12.2021 0.5131 ex29336980 55 Terbutryn (ISO) (CAS RN 886-50-0) 0 % - 31.12.2025 0.4957 ex29336980 60 Cyanuric acid (CAS RN 108-80-5) 0 % - 31.12.2025 0.4985 ex29337900 70 (S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2) 0 % - 31.12.2025 0.6872 ex29339980 16 Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more 0 % - 31.12.2025 0.6829 ex29339980 21 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1) 0 % - 31.12.2025 0.6599 ex29339980 54 3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6) 0 % - 31.12.2025 0.6933 ex29339980 87 Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more 0 % - 31.12.2025 0.4955 ex29342080 60 Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3) 0 % - 31.12.2022 0.4910 ex29342080 70 N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) 0 % - 31.12.2025 0.4942 ex29349990 25 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) 0 % - 31.12.2025 0.6824 ex29349990 39 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) 0 % - 31.12.2025 0.6823 ex29349990 41 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8) 0 % - 31.12.2025 0.6893 ex29349990 44 Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more 0 % - 31.12.2025 0.5133 ex29349990 86 Dithianon (ISO) (CAS RN 3347-22-6) 0 % - 31.12.2025 0.5136 ex29349990 87 2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) 0 % - 31.12.2025 0.5036 ex29359090 42 Penoxsulam (ISO) (CAS RN 219714-96-2) 0 % - 31.12.2025 0.6777 ex29359090 54 Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.6802 ex29359090 56 N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) 0 % - 31.12.2025 0.6903 ex29359090 57 N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4) 0 % - 31.12.2025 0.6664 ex29359090 59 Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more 0 % - 31.12.2025 0.4944 ex29389030 10 Ammonium glycyrrhizate (CAS RN 53956-04-0) 0 % - 31.12.2025 0.6600 ex32019090 ex32029000 40 10 Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3) 0 % - 31.12.2021 0.5091 ex32041100 20 Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight 0 % - 31.12.2021 0.5134 ex32041100 45 Preparation of dispersion dyes, containing: whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0) 0 % - 31.12.2025 0.6652 ex32041200 70 Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight 0 % - 31.12.2025 0.6603 ex32041700 33 Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight 0 % - 31.12.2025 0.5100 ex32041900 73 Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight 0 % - 31.12.2021 0.6726 ex32089019 55 Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent 0 % - 31.12.2021 0.5031 ex32159070 40 Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with: for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices 0 % - 31.12.2025 0.4863 ex34021190 10 Sodium lauroyl methyl isethionate 0 % - 31.12.2021 0.6725 ex35069190 50 Preparation containing by weight: dissolved in: 0 % - 31.12.2021 0.6759 ex38021000 10 Mixture of activated carbon and polyethylene, in form of powder 0 % - 31.12.2025 0.6874 ex38089230 10 Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more 0 % - 31.12.2025 0.5048 ex38089390 20 Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight: of a kind used in plant growth regulators 0 % - 31.12.2025 0.5030 ex38089390 30 Aqueous solution containing by weight: for use in the manufacture of a plant growth regulator 0 % - 31.12.2022 0.5088 ex38089390 50 Preparation in the form of powder, containing by weight: of a kind used in plant growth regulators 0 % - 31.12.2021 0.6532 ex38089420 30 Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing: 0 % - 31.12.2024 0.6904 ex38112100 12 Dispersing agent containing : used in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2025 0.6906 ex38112100 14 Dispersing agent : used in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2025 0.6907 ex38112100 16 Detergent containing : used in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2025 0.6905 ex38112100 18 Detergent containing : used in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2025 0.6671 ex38112100 75 Additives containing: with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2022 0.6669 ex38112100 77 Antifoam additives consisting of: for use in the manufacture of additive blends for lubricating oils 0 % - 31.12.2022 0.6666 ex38112100 80 Additives containing : with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils 0 % - 31.12.2022 0.6668 ex38112900 65 Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils 0 % - 31.12.2022 0.5062 ex38159090 30 Catalyst, consisting of a suspension in mineral oil of: 0 % - 31.12.2025 0.2783 ex38159090 80 Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol 0 % - 31.12.2025 0.6810 ex38249992 23 Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol 0 % - 31.12.2025 0.4909 ex38249992 29 Preparation containing by weight: 0 % - 31.12.2025 0.6779 ex38249992 40 Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent 0 % - 31.12.2025 0.7742 ex38249992 52 Electrolyte containing: for use in the manufacture of motor vehicle batteries 3.2 % - 31.12.2021 0.5050 ex38249992 61 3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine 0 % - 31.12.2025 0.6720 ex38249992 68 Preparation containing by weight: Dissolved in: 0 % - 31.12.2025 0.6719 ex38249992 69 Preparation containing by weight: 0 % - 31.12.2021 0.3069 ex38249992 88 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1) 0 % - 31.12.2025 0.4719 ex38249993 35 Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8) 0 % - 31.12.2024 0.7313 ex38249996 45 Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with: 3.2 % - 31.12.2021 0.6628 ex38249996 46 Manganese zinc ferrite granulate, containing by weight: 0 % - 31.12.2025 0.6749 ex38249996 48 Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 % 0 % - 31.12.2025 0.6897 ex39014000 30 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with: for use in the co-extrusion processing of films for flexible food packaging 0 % m3 31.12.2025 0.6920 ex39019080 53 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with: 0 % m3 31.12.2025 0.6734 ex39019080 55 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: 0 % - 31.12.2025 0.5049 ex39019080 67 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more 0 % - 31.12.2025 0.6736 ex39039090 65 Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8) 0 % - 31.12.2025 0.6804 ex39039090 70 Copolymer in the form of granules containing by weight: 0 % m3 31.12.2025 0.4981 ex39046980 81 Poly(vinylidene fluoride) (CAS RN 24937-79-9) 0 % - 31.12.2025 0.6672 ex39069090 33 Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm 0 % - 31.12.2025 0.6663 ex39069090 37 Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm 0 % - 31.12.2025 0.6891 ex39071000 20 Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine 0 % - 31.12.2022 0.6839 ex39073000 15 Epoxide resin, halogen-free, for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits 0 % - 31.12.2025 0.6840 ex39073000 25 Epoxide resin 0 % - 31.12.2025 0.4940 ex39079980 ex39139000 30 20 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) 0 % - 31.12.2025 0.5057 ex39079980 80 Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles 0 % - 31.12.2025 0.5032 ex39094000 20 Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices 0 % - 31.12.2025 0.6921 ex39100000 15 Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated 0 % - 31.12.2021 0.7217 ex39100000 45 Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8) 0 % - 31.12.2021 0.5109 ex39119099 35 Alternated copolymer of ethylene and maleic anhydride (EMA) 0 % - 31.12.2025 0.4953 ex39121100 40 Cellulose diacetate powder 0 % - 31.12.2025 0.6718 ex39123985 50 Polyquaternium 10 (CAS RN 68610-92-4) 0 % - 31.12.2025 0.4757 ex39191080 37 Polytetrafluoroethylene film: 0 % - 31.12.2025 0.4761 ex39191080 ex39199080 43 26 Ethylene vinyl acetate film: 0 % - 31.12.2022 0.6886 ex39191080 63 Reflecting film consisting of 0 % - 31.12.2025 0.4947 ex39199080 65 Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner 0 % - 31.12.2025 0.4925 ex39199080 70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad 0 % - 31.12.2025 0.4964 ex39199080 82 Reflecting film consisting of: 0 % - 31.12.2025 0.6640 ex39201040 40 Tubular layered film predominately of polyethylene: 0 % - 31.12.2025 0.3357 ex39206219 48 Sheets or rolls of poly(ethylene terephthalate): 0 % - 31.12.2025 0.2589 ex39206219 52 Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D257 method) 0 % - 31.12.2023 0.6911 ex39211900 40 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: of a kind used for the manufacture of alkaline battery separators 3.2 % - 31.12.2021 0.7263 ex39211900 45 Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: 3.2 % - 31.12.2021 0.6742 ex39219055 40 Three layered fabric sheet, in rolls, 0 % m2 31.12.2025 0.7335 ex39263000 ex39269097 50 48 Coated interior or exterior decorative parts consisting of: for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705 0 % p/st 31.12.2022 0.6717 ex39269097 23 Plastic cover with clips for the exterior rear-view mirror of motor vehicles 0 % p/st 31.12.2025 0.3850 ex39269097 43 Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm 0 % - 31.12.2023 0.6708 ex40094200 20 Rubber brake hose with: for use in the manufacture of goods of Chapter 87 0 % - 31.12.2025 0.6844 ex40169300 30 Rectangular ethylene-propylene-diene rubber gasket, with: 0 % - 31.12.2025 0.6884 ex54033900 10 Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry 0 % - 31.12.2022 0.5059 ex56031310 20 Non-woven of spunbonded polyethylene, with a coating, 0 % m2 31.12.2025 0.5987 ex56031490 60 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: 0 % m2 31.12.2023 0.4978 ex69091900 20 Silicon nitride (Si3N4) rollers or balls 0 % - 31.12.2025 0.7619 ex70060090 40 Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having: 0 % - 31.12.2023 0.6870 ex70091000 40 Electrochromic self-dimming inside rear-view mirror, consisting of: for use in the manufacture of motor vehicles of Chapter 87 0 % - 31.12.2025 0.5021 ex70191910 20 Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % - 31.12.2025 0.5020 ex70191910 25 Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % - 31.12.2025 0.4853 ex72029980 10 Ferro-dysprosium, containing by weight: 0 % - 31.12.2025 0.7502 ex73182400 40 Tube or pipe restraint joint elements: 0 % - 31.12.2023 0.6680 ex73269098 40 Iron and steel weights of a kind used for the production of remote controls 0 % - 31.12.2025 0.5029 ex76042910 ex76061299 ex76061299 10 21 25 Sheets and bars of aluminium-lithium alloys 0 % - 31.12.2022 0.5487 ex76071190 ex76071190 ex76071190 ex76071190 ex76071190 ex76071190 48 49 51 52 53 56 Aluminium foil in rolls: 0 % - 31.12.2021 0.4050 ex76071190 60 Plain aluminium foil with the following parameters: of a kind used for high voltage etching 3.7 % - 31.12.2021 0.7698 ex76072090 10 Aluminium foil, in rolls: for use in the manufacture of lithium-ion battery cell covers 3.7 % - 31.12.2021 0.6730 ex81019600 10 Tungsten wire containing by weight 99 % or more of tungsten with: 0 % - 31.12.2025 0.5097 ex81043000 35 Magnesium powder 0 % - 31.12.2025 0.4904 ex81089030 45 Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967 0 % - 31.12.2025 0.6805 ex81130090 20 Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules 0 % - 31.12.2025 0.5024 ex83016000 ex84199085 ex84799070 ex84819000 ex85030099 ex85159080 ex85371098 ex85389099 ex87089910 ex87089997 30 40 30 50 43 40 55 70 55 22 Silicone or plastic keyboards, comprising: 0 % p/st 31.12.2025 0.4996 ex84079090 20 Compact Liquid Petroleum Gas (LPG) Engine System, with: for use in the manufacture of vehicles of heading 8427 0 % - 31.12.2025 0.6160 ex84143081 ex84148073 60 30 Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: for use in the manufacture of heat pumps for household appliances, including clothes dryers 0 % - 31.12.2023 0.7317 ex84148022 20 Air membrane compressor with: of a kind used in the production of motor vehicle seats 0 % - 31.12.2022 0.6842 ex84159000 60 Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with: 0 % p/st 31.12.2025 0.6860 ex84159000 65 Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with: for use in the manufacture of car air-conditioning systems 0 % p/st 31.12.2022 0.6821 ex84369900 10 Part containing: and whether or not containing: for use in the manufacture of garden shredders 0 % p/st 31.12.2025 0.7380 ex84818059 30 Two-way flow control valve with housing, with: 0 % - 31.12.2022 0.7518 ex84819000 40 Valve armature: 0 % - 31.12.2023 0.4997 ex84834090 80 Transmission gearbox, with: for use in the manufacture of goods of heading 8427 0 % p/st 31.12.2025 0.6854 ex85011010 20 Synchronous motor for a dishwasher with a water flow control mechanism with 0 % - 31.12.2022 0.6858 ex85011099 64 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: 0 % - 30.06.2021 0.6880 ex85011099 65 Electric turbocharger actuator, with: 0 % - 31.12.2025 0.6627 ex85011099 75 Permanently excited DC motor with 0 % - 31.12.2025 0.4731 ex85013100 37 Permanently excited DC motor with 0 % - 31.12.2024 0.5577 ex85013100 50 DC motors, brushless, with: 0 % - 31.12.2022 0.6809 ex85013100 ex85013200 53 45 Automotive-ready, brushless and permanently excited direct current motor with: 0 % - 31.12.2025 0.6161 ex85030099 55 Stator for brushless motor, with: of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums 0 % p/st 31.12.2025 0.7764 ex85043180 55 Electrical transformer with: 0 % - 31.12.2024 0.7788 ex85051100 68 Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with: 0 % - 31.12.2024 0.6857 ex85051100 ex85051990 73 35 Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with: 0 % p/st 31.12.2022 0.7641 ex85076000 13 Prismatic lithium-ion electric accumulators with: for use in the manufacture of rechargeable electric vehicle batteries 1.3 % - 31.12.2021 0.6685 ex85076000 15 Cylindrical lithium-ion-accumulators or modules with: for use in the manufacture of electric bicycles 1.3 % - 31.12.2021 0.6625 ex85076000 17 Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with: 1.3 % - 31.12.2021 0.7663 ex85076000 18 Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with: for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703 1.3 % - 31.12.2021 0.7717 ex85076000 22 Integrated battery system in a metal case with holders, consisting of: for use in the manufacture of hybrid motor vehicles 1.3 % - 31.12.2021 0.2907 ex85076000 30 Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries 1.3 % - 31.12.2021 0.6703 ex85076000 33 Lithium-ion accumulator, with: 1.3 % - 31.12.2021 0.6702 ex85076000 37 Lithium-ion accumulator, with: 1.3 % - 31.12.2021 0.5548 ex85076000 50 Modules for the assembly of batteries of ion lithium electric accumulators with: 1.3 % - 31.12.2021 0.5342 ex85076000 65 Cylindrical lithium ion cell with 1.3 % - 31.12.2021 0.7888 ex85076000 68 Lithium-ion accumulator in a metal housing, with 1.3 % - 31.12.2021 0.5356 ex85076000 75 Rectangular lithium-ion-accumulator, with 1.3 % - 31.12.2021 0.6753 ex85076000 77 Lithium-ion rechargeable batteries, with: 1.3 % - 31.12.2021 0.5014 ex85087000 ex85371098 20 98 Electronic circuit cards that: 0 % p/st 31.12.2025 0.6856 ex85122000 30 Lighting module, containing at least: in an aluminium housing with a radiator, mounted at a bracket with an actuator 0 % p/st 31.12.2025 0.6863 ex85123090 20 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2022 0.6689 ex85299065 28 Electronic assembly comprising at least: 0 % p/st 31.12.2025 0.4893 ex85299065 ex85299092 65 53 Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module 0 % p/st 31.12.2025 0.4890 ex85299092 25 LCD modules, not combined with touch screen facilities, solely consisting of: for use in the manufacture of radios for motor vehicles 0 % p/st 31.12.2025 0.6654 ex85299092 37 Fastening and covering ledges of aluminium alloy containing: specifically shaped for use in the manufacture of TV sets 0 % - 31.12.2025 0.6629 ex85299092 63 LCD module suitable for installation in motor vehicles of Chapter 87 0 % p/st 31.12.2025 0.5018 ex85299092 67 Colour LCD display panel for LCD monitors of heading 8528: for use in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2025 0.6781 ex85299092 85 Colour LCD module in a housing: for permanent installation in vehicles of Chapter 87 0 % p/st 31.12.2025 0.6849 ex85366990 60 Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors 0 % p/st 31.12.2022 0.5028 ex85366990 84 Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 0 % p/st 31.12.2025 0.6864 ex85371091 50 Fuse control module in a plastic housing with mounting brackets comprising: of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025 0.6889 ex85371098 35 Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing: 0 % p/st 31.12.2025 0.6866 ex85389091 ex85389099 20 50 Interior antenna for a car door locking system, comprising: whether or not PCB including integrated circuits, diodes and transistors, for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025 0.6710 ex85443000 ex85444290 60 50 Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87 0 % - 31.12.2025 0.6867 ex85443000 85 Extension two-core cable with two connectors, containing at least: of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2025 0.6853 ex85444290 70 Electric conductors: for use in the manufacture of hearing aids, accessory kits and speech processors 0 % p/st 31.12.2025 0.6861 ex85444993 30 Electric conductors: for use in the manufacture of hearing aids, implants and speech processors 0 % m 31.12.2025 0.5002 ex85459090 40 Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with: 0 % m2 31.12.2021 0.6707 ex87083010 ex87083091 70 40 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025 0.6869 ex87084020 ex87084050 20 10 Automatic hydrodynamic gearbox for use in the manufacture of motor vehicles of Chapter 87 0 % p/st 31.12.2025 0.6648 ex87085020 ex87085099 20 10 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle 0 % p/st 31.12.2025 0.6711 ex87088020 ex87088035 10 10 Upper strut insulator containing: for use in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025 0.6859 ex87089120 ex87089199 30 30 Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with: of a kind used in heat exchangers for car cooling systems 0 % p/st 31.12.2025 0.7716 ex87089135 20 Turbocharger cooling duct containing: for use in the manufacture of compression ignition engines of motor vehicles 0 % - 31.12.2024 0.6687 ex87089510 ex87089599 10 20 Inflatable safety cushion of high strength polyamide fibre: 0 % p/st 31.12.2025 0.6688 ex87089510 ex87089599 20 30 Inflatable safety cushion of high strength polyamide fibre: 0 % p/st 31.12.2025 0.7581 ex87085020 ex87085099 60 15 Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising: 0 % - 31.12.2024 0.6686 ex87141090 10 0 % p/st 31.12.2025 0.6848 ex87141090 70 Motor bikes radiators in consignment of 100 pieces or more 0 % p/st 31.12.2022 0.6879 ex87149610 10 Pedals, for use in the manufacture of bicycles (including electric bicycles) 0 % - 31.12.2025 0.6878 ex87149990 30 Seat posts, for use in the manufacture of bicycles (including electric bicycles) 0 % p/st 31.12.2025 0.4883 ex90019000 85 Light guide panel made of poly(methyl methacrylate): for use in the manufacture of backlight units for flat screen TVs 0 % - 31.12.2025 0.7590 ex90021100 18 Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with: 0 % - 31.12.2023 0.5692 ex90021100 20 Lenses: 0 % - 31.12.2022 0.5025 ex94019080 10 Ratchet disk for use in the manufacture of reclining car seats 0 % p/st 31.12.2025 0.4846 ex95030075 ex95030095 10 10 Plastic cable car scale models, whether or not with a motor, for printing 0 % p/st 31.12.2025 0.6950 ex96072010 10 Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers 0 % - 31.12.2022 0.6949 ex96072090 10 Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers 0 % - 31.12.2025

industrial monocarboxylic fatty acids of subheading 38231910,

methyl esters of fatty acids of heading 2915 or 2916,

fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,

fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,

stearic acid of subheading 38231100,

goods of heading 3401, or

fatty acids with high purity of heading 2915

conjugated linoleic acid of heading 3823 or

ethyl- or methyl esters of linoleic acid of heading 2916

not from concentrate,

of the genus Mangifera,

of a Brix value of 14 or more, but not more than 20,

not from concentrate,

of the genus Ananas,

of a Brix value of 11 or more but not more than 16,

in the form of powder

of a purity by weight of 99,0 % or more

with a median grain size of 0,7 μm or more, but not more than 2,1 μm

where 70 % of the particles have a diameter of not more than 3 μm

94 % or more, but less than 98,5 % of aluminium oxide,

2 % (± 1,5 %) of magnesium oxide,

1 % (± 0,6 %) of yttrium oxide,

either 2 % (± 1,2 %) of lanthanum oxide, or

2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,

in the form of powder,

with a purity by weight of 99,5 % or more,

with a decomposition point of 263°C or more,

with a particle size of 4 μm (± 1 μm),

with a Total-Na2O-content by weight of not more than 0,06 %

35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,

not more than 1000 mg/kg of chloride,

not more than 2 mg/kg of iron, and

not more than 10 mg/kg of potassium

C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),

C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),

C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),

wax

a vinyl-based polymer and

a colouring agent

15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and

10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,

Methyl ethyl ketone (CAS RN 78-93-3),

Heptane (CAS RN 142-82-5), and

Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)

1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine

1,8 % of sodium para-nitrophenolate,

1,2 % of sodium ortho-nitrophenolate,

0,6 % of sodium 5-nitroguaiacolate,

55 % or more of Gibberellin A4,

1 % or more but not more than 35 % of Gibberellin A7,

90 % or more of Gibberellin A4 and Gibberellin A7 combined,

not more than 10 % of a combination of water and other naturally occurring Gibberellins,

1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),

1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),

1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or

1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)

esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),

35 % or more but not more than 55 % by weight of mineral oils, and

with a chlorine content of not more than 0,05 % by weight,

containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),

containing 35 % or more but not more than 55 % by weight of mineral oils,

with a chlorine content by weight of not more than 0,05 %,

having a total base number of less than 15,

Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)

40 % or more but not more than 60 % by weight of mineral oils and

having a total base number more than 120

long chain alkyltoluene calcium sulphonates,

more than 30 % but not more than 50 % by weight of mineral oils, and

having a total base number of more than 310 but not more than 340,

Calcium (C10-C14) dialkylbenzenesulfonates,

more than 40 %, but not more than 60 % by weight of mineral oils,

a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and

more than 50 % but not more than 80 % by weight of mineral oils,

polyisobutylene aromatic polyamine succinimide,

more than 40 % but not more than 60 % by weight of mineral oils,

tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and

silicon dioxide,

containing 6,6 % (± 0,6 %) by weight of magnesium, and

containing 2,3 % (± 0,2 %) by weight of titanium

85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and

1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate

5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),

60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),

0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),

20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)

10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)

64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and

6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)

80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and

not more than 1 % triphenyl phosphate (CAS RN 115-86-6)

a particle size of less than 10 μm,

a purity by weight of more than 98 %

52 % or more but not more than 76 % of iron(III)oxide,

13 % or more but not more than 42 % of manganese oxide, and

2 % or more but not more than 22 % of zinc oxide

more than 10 % but not more than 20 % by weight of copolymer,

a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and

a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,

an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and

a melt flow rate of 10g/10 min or more (125 °C/2,16 kg, ASTM D1238)

an acrylic acid content of 6 % or more but not more than 50 % by weight, and

a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)

75 % (± 7 %) styrene and

25 % (± 7 %) methylmethacrylate

containing by weight more than 2 % phosphorous calculated on the solid content, chemically bound in the epoxide resin,

not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and

containing solvents,

containing by weight 21 % or more of brome,

not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and

containing solvents

with a thickness of 100 μm or more,

an elongation at break of not more than 100 %,

coated on one side with a pressure sensitive silicon adhesive

of a thickness of 100 μm or more,

coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner

a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,

a layer of an acrylic resin having embedded glass beads,

a layer of an acrylic resin hardened by a melamine cross-linking agent,

a metal layer,

an acrylic adhesive, and

a release film

a polyurethane layer,

a glass microspheres layer,

a metallised aluminium layer, and

an adhesive, covered on one or both sides with a release liner,

whether or not a poly(vinyl chloride) layer,

a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use

consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,

having a total thickness of 55 μm or more,

having a diameter of 500 mm or more but not more than 600 mm

coated on both sides with a layer of epoxy acrylic resin,

of a total thickness of 37 μm (± 3 μm)

a width of 98 mm or more but not more than170 mm,

a thickness of 15 μm or more but not more than 36 μm,

zero transversal production direction (TD) shrinkage,

a total thickness of 8 μm or more, but not more than 50 μm,

a width of 15 mm or more, but not more than 900 mm,

a length of more than 200 m, but not more than 8000 m,

an average pore size between 0,02 μm and 0,1 μm,

laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,

coated or not with surfactant,

coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,

coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm

comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,

coated on both sides with polyamide,

of a total thickness not more than 135 μm,

of a total weight not more than 80 g/m2

a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and

a PVC foil,

not containing layers of copper, nickel or chromium,

textile strings,

a wall thickness of 3,2 mm,

a metal hollow terminal pressed on both ends, and

one or more mounting brackets,

a length of 72 mm or more but not more than 825 mm,

a width of 18 mm or more but not more than 155 mm,

a peak temperature of 150°C or more but not more than 240 °C,

a permissible material outflow at the place of the mold split of not more than 0,3 mm

of a weight of more than 80 g/m2 but not more than 105 g/m2 and

an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)

of weight of 160 g/m2 or more but not more than 300 g/m2,

not laminated,

with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M,

pleatable

a length of 300 mm or more but not more than 1500 mm,

a width of 300 mm or more but not more than 1500 mm,

a thickness of 0,5 mm or more but not more than 1,1 mm,

an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,

with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,

with or without a multi layer anti-reflection-coating on the other side, and

machined (chamfered) edges

a mirror support

a plastic casing and

an integrated circuit

78 % or more of dysprosium, and

18 % or more but not more than 22 % of iron

of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,

produced by metal injection moulding,

with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/ – 1),

measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm

whether or not with parts of other material

whether or not with parts of other metals

whether or not surface treated

whether or not printed

having a purity of 99,99 % by weight,

of a thickness of 0,021 mm or more but not more than 0,2 mm,

with a width of 500 mm,

with a surface oxide layer by 3 to 4 nm thick,

and with a cubic texture of more than 95 %

an aluminium content of 99,98 % or more,

a thickness of 0,070 mm or more but not more than 0,125 mm,

with a cubic texture,

coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,

with a width of 200 mm or more, but not more than 400 mm,

with a thickness of 0,138 mm or more, but not more than 0,168 mm,

a maximum cross-sectional dimension of not more than 50 μm

a resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre

of purity by weight of more than 99,5 %

with a particle size of 0,2 mm or more but not more than 0,8 mm

parts of common metal, and

whether or not comprising parts of plastic,

epoxy resin reinforced with fiberglass or wood,

whether or not printed or surface-treated,

with or without electrical conductors,

with or without a membrane bonded to the keyboard,

with or without mono or multilayer protective film

6 cylinders,

an output of 75 kW or more, but not more than 80 kW,

inlet and exhaust valves modified to operate continuously in heavy duty applications,

driven by on-off single phase alternate current (AC) or brushless direct current (BLDC) variable speed motors,

with a nominal power rating of not more than 1,5 kW,

a rated voltage of 100 V or more but not more than 240 V,

with a height of not more than 300 mm,

an external diameter of not more than 150 mm,

with a unit weight of not more than 15 kg,

a flow of 4,5 l/min or more, but not more than 7 l/min,

power input of not more than 8,1 W, and

a gauge pressure capacity not exceeding 400 hPa (0,4 bar),

extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,

a weight of 0,02 kg or more but not more than 0,25 kg

a length of 143 mm or more but not more than 292 mm,

a diameter of 31 mm or more but not more than 99 mm,

with a weight of not less than 0,12 kg and not more than 0,9 kg,

a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and

a solid particle diameter of not more than 0,06 mm,

a single-phase AC motor,

an epicyclic gearing,

a cutter blade,

a capacitor,

a part fitted with a threaded bolt,

at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,

at least 330 cm3/minute, but not more than 5000 cm3/minute flow rate,

at least 19, but not more than 300 MPa operating pressure

for the opening and closing of the flow of fuel,

consisting of a shaft and a blade,

with at least 3 but not more than 8 holes on the blade,

made of metal and/or metal alloy(s)

not more than 3 gears,

an automatic deceleration system, and

a power reversal system,

a length without axle of 24 mm (± 0,3),

a diameter of 49,3 mm (± 0,3),

a rated voltage of 220 V AC or more but not more than 240 V AC,

a rated frequency of 50 Hz or more but not more than 60 Hz,

an input power of not more than 4 W,

a rotation speed of 4rpm or more but not more than 4,8rpm,

an output torque of not less than 10kgf/cm

with Ingress Protection (IP) standard of IP69,

with a rotor speed of not more than 6500 rpm when not loaded,

with a rated voltage of 12,0 V (± 0,1),

of a specified temperature range of – 40 °C or more, but not more than + 165 °C,

with or without a connecting pinion,

with or without an engine connector,

with or without a flange,

with a diameter of not more than 40 mm (not including the flange),

with an overall height of not more than 90 mm (from the base to the pinion)

a DC motor,

an integrated gear mechanism,

a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,

a (pulling) force of 250 N or more in each position of its stroke,

an effective stroke of 15 mm or more but not more than 25 mm,

with or without an on-board diagnostics interface

a multiple-phase winding,

an external diameter of 28 mm or more but not more than 35 mm,

a rated speed of not more than 12000 rpm,

a power supply voltage of 8 V or more but not more than 27 V

a multiple-phase winding,

an external diameter of 30 mm or more but not more than 90 mm, including mounting flange,

a rated speed of not more than 15000 rpm,

an output of 45 W or more but not more than 400 W, and

a supply voltage of 9 V or more but not more than 50 V,

whether or not with a drive disc,

whether or not with a crankcase,

whether or not with a fan,

whether or not with a cap assembly,

whether or not with a sun gear,

whether or not with a speed and rotational direction encoder,

whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,

whether or not with a mounting flange

an external diameter of 80 mm or more, but not more than 200 mm,

a supply voltage of 9 V or more, but not more than 16 V,

an output at 20 °C of 300 W or more, but not more than 750 W,

a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

a rated speed at 20 °C of 600 rpm or more, but not more than 3100 rpm,

with or without a pulley,

with or without an electronic power steering sensor/controller

a specified speed of not more than 4100 rpm,

a minimum output of 400 W, but not more than 1,3 kW (at 12 V),

a flange diameter of 85 mm or more, but not more than 200 mm,

a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,

a housing length of not more than 265 mm, measured from the flange to the outer ending,

a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),

a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and

surface magnets,

whether or not with electronic power steering controller

an internal diameter of 206,6 mm (± 0,5),

an external diameter of 265,0 mm (± 0,2), and

a width of 37,2 mm or more but not more than 47,8 mm,

a capacity of 0,22 kVA or more, but not more than 0,24 kVA,

an operating temperature range of + 10°C or more, but not more than + 125°C,

four or five inductively coupled copper wire windings,

11 or 12 connection pins at the bottom, and

dimensions of not more than 32 mm x 37,8 mm x 25,8 mm

a length of 13,8 mm or more but not more than 45,2 mm,

a width of 7,8 mm or more but not more than 25,2 mm,

a height of 1,3 mm or more but not more than 4,7 mm

a length of 5 mm or more, but not more than 60 mm,

a width of 5 mm or more, but not more than 40 mm,

a thickness of 3 mm or more, but not more than 15 mm

a width of 173,0 mm (± 0,3 mm),

a thickness of 45,0 mm (± 0,3 mm),

a height 125,0 mm (± 0,3 mm),

a nominal voltage of 3,67 V (± 0,01 V), and

a nominal capacity of 94 Ah and/or 120 Ah,

a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,

a nominal voltage of 36 V or more, but not more than 48 V,

a power of 300 Wh or more, but not more than 648 Wh,

a rated voltage of 12 V,

a length of 350 mm or more but not more than 355 mm,

a width of 170 mm or more but not more than 180 mm,

a height of 180 mm or more but not more than 195 mm,

weighing 10 kg or more but not more than 15 kg,

a nominal charge of 60 Ah or more, but not more than 80 Ah

a length of not more than 1600 mm,

a width of not more than 448 mm,

a height of not more than 395 mm,

a nominal voltage of 280 V or more but not more than 400 V,

a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,

a charging voltage of 110 V or more but not more than 230 V, and

containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,

a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh),

Battery Management System,

a relay,

a low voltage converter (DC/DC),

at least one connector,

a length of 150 mm or more, but not more than 1000 mm,

a width of 100 mm or more, but not more than 1000 mm,

a height of 200 mm or more, but not more than 1500 mm,

a weight of 75 kg or more, but not more than 200 kg,

a nominal capacity not less than 150Ah and not more than 500 Ah,

a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %)

a length of 1200 mm or more, but not more than 2000 mm,

a width of 800 mm or more, but not more than 1300 mm,

a height of 2000 mm or more, but not more than 2800 mm,

a weight of 1800 kg or more, but not more than 3000 kg,

a nominal capacity of 2800 Ah or more but not more than 7200 Ah

a length of 298 mm or more, but not more than 500 mm,

a width of 33,5 mm or more, but not more than 209 mm,

a height of 75 mm or more, but not more than 228 mm,

a weight of 3,6 kg or more, but not more than 17 kg, and

a nominal energy of 458 Wh or more, but not more than 2158 Wh

3,5 VDC to 3,8 VDC,

300 mAh to 900 mAh, and

a diameter of 10,0 mm to 14,5 mm

a length of 65 mm or more, but not more than 225 mm,

a width of 10 mm or more, but not more than 75 mm,

a height of 60 mm or more, but not more than 285 mm,

a nominal voltage of 2,1 V or more, but not more than 3,8 V, and

a nominal capacity of 2,5 Ah or more, but not more than 325 Ah

a metal casing,

a length of 173 mm (± 0,15 mm),

a width of 21 mm (± 0,1 mm),

a height of 91 mm (± 0,15 mm),

a nominal voltage of 3,3 V, and

a nominal capacity of 21 Ah or more

a length of 700 mm or more, but not more than 2820 mm,

a width of 935 mm or more, but not more than 1660 mm,

a height of 85 mm or more, but not more than 700 mm,

a weight of 250 kg or more, but not more than 700 kg,

a power of not more than 175 kWh,

a nominal voltage of 400 V

are connected by wire or radio frequency to each other and the motor controller card, and

regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,

whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)

two LEDs,

glass or plastic lenses, focusing/scattering the light emitted by the LEDs,

reflectors redirecting the light emitted by the LEDs,

a printed circuit board,

a connector,

whether or not a metal holder,

a printed circuit board with,

one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,

flash memory,

operating memory,

with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,

sockets and plugs for connecting a LCD-display, a LED lighting and a control panel

one or more TFT glass or plastic cells,

a die cast heat sink,

a backlight unit,

one printed circuit board with micro controller, and

LVDS (Low Voltage Differential Signalling) interface,

silicon and magnesium,

with a length of 300 mm or more but not more than 2200 mm,

with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,

with or without a touch screen,

with an LED backlight,

with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

with a plug for power supply and CAN and LVDS interfaces,

with or without electronic components for dynamic adjustments of colour,

in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

with or without a touch screen,

with backlight, micro-controller,

with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,

in a housing with or without a heat sink at the back of the housing,

without a signal-processing module,

whether or not with haptic and acoustical feedback,

with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm,

without touch screen,

with a backlight and micro-controller,

with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,

without a signal processing module,

with control electronics for pixel addressing only,

with a motorised mechanism for moving the display screen,

sockets with or without fuses,

connecting ports,

a printed circuit board with embedded microprocessor, micro switch and relay,

2 rotary knobs

27 or more pushbuttons

LED lights

2 integrated circuits for receiving and sending of control signals via the LIN-bus

an antenna module in a plastic housing,

a connection cable with a plug,

at least two mounting brackets,

a rubber grommet,

a metal attachment bracket,

of a voltage of not more than 80 V,

with a length of not more than 120 cm,

fitted with connectors,

of a voltage of not more than 80 V,

of a platinum-iridium-alloy,

coated with poly(tetrafluoroethylene),

without connectors,

controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,

a thickness of less than 600 μm,

a weight of less than 500 g/m2

with a hydraulic torque converter,

without transfer box and cardan shaft,

whether or not with front differential,

of a length of 1 m or more but not more than 2 m,

of a weight of 6 kg or more but not more than 9 kg

a metal holder with three mounting screws, and

a rubber bump,

an insulating area flatness of not more than 0,1 mm,

a permissible particle quantity of 0,3 mg per tank,

a distance between pores of 2 mm or more,

pore sizes of not more than 0,4 mm, and

not more than 3 pores larger than 0,2 mm,

an aluminium alloy duct with at least one metal holder and at least two mounting holes,

a rubber pipe with clips,

a stainless steel flange highly resistant to corrosion [SUS430JIL],

sewn,

folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming

sewn,

folded,

with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,

suitable for cool inflator technology

at least an actuator,

whether or not an interior distribution by chain

Motorcycle fork rod inner tubes:

of SAE1541 carbon steel,

with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),

having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,

having an elongation at break of 15 %,

perforated

whether or not cut,

whether or not printed,

a horizontal field of view range to a maximum of 120 deg,

a diagonal field of view range to a maximum of 92 deg,

a focal length to a maximum of 7,50 mm,

a relative aperture of a maximum of F/2,90,

a maximum diameter of 22 mm

measuring not more than 95 mm × 55 mm × 50 mm,

with a resolution of 160 lines/mm or better, and

with a zoom ratio of 3 or more times

(3) the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns: Serial Number CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review 0.8021 28047010 Red phosphorus 0 % - 31.12.2022 0.8022 28047090 Phosphorus, other than red phosphorus 0 % - 31.12.2023 0.7974 ex29033919 40 3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.8017 ex29039980 25 2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8018 ex29039980 35 2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.7957 ex29049900 55 2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more 0 % - 31.12.2025 0.7963 ex29062900 70 1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8015 ex29142900 35 4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.7955 ex29152400 10 Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.7980 ex29161995 60 Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2) 0 % - 31.12.2025 0.7940 ex29161995 70 Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more 0 % - 31.12.2025 0.7931 ex29162000 25 Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.7933 ex29162000 35 2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.7929 ex29163990 16 3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.8008 ex29182900 40 3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 % 0 % - 31.12.2025 0.7934 ex29189990 43 Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more 0 % - 31.12.2025 0.7947 ex29212900 70 N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.8019 ex29214900 45 2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8020 ex29214900 55 2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.7946 ex29221900 29 N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.7935 ex29221900 70 2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8000 ex29241900 18 2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.8013 ex29251995 40 N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more 0 % - 31.12.2025 0.7985 ex29309098 88 1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more 0 % - 31.12.2025 0.7951 ex29319000 25 N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.7958 ex29322090 18 4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.7984 ex29322090 23 1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more 0 % - 31.12.2025 0.7978 ex29329900 68 3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.7930 ex29329900 73 5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.7936 ex29329900 78 Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.7954 ex29329900 83 6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.7938 ex29331990 43 tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.7937 ex29332990 23 1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.7976 ex29333999 83 2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.7925 ex29333999 84 Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.7981 ex29333999 86 3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.7939 ex29333999 87 6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.7986 ex29333999 88 Benzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more 0 % - 31.12.2025 0.7952 ex29336980 33 2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.7927 ex29339980 60 2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.7971 ex29339980 70 5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8014 ex29339980 80 Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.7926 ex29349990 65 Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.7944 ex29349990 70 1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.7928 ex29359090 44 4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more 0 % - 31.12.2025 0.7943 ex32019020 10 Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less 0 % - 31.12.2025 0.7975 ex38011000 10 Artificial graphite in powder form, (CAS RN 7782-42-5) with: 1.8 % - 31.12.2021 0.7994 ex38011000 20 Artificial graphite (CAS RN 7782-42-5) powder form, with: 1.8 % - 31.12.2021 0.7998 ex38159090 38 Photoinitiator, containing by weight: 0 % - 31.12.2025 0.7999 ex38159090 48 Photoinitiator containing by weight: 0 % - 31.12.2025 0.7950 ex39029090 65 Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39 0 % - 31.12.2025 0.7953 ex39100000 65 Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4) 0 % - 31.12.2025 0.8009 ex39119099 38 Mixture containing by weight: 0 % - 31.12.2025 0.8010 ex39119099 48 Mixture containing by weight: 0 % - 31.12.2025 0.7949 ex39206100 40 Extruded thermoplastic foils or films of polycarbonate with: for use in the production of retroreflective products 0 % - 31.12.2025 0.8011 ex39206219 ex39206290 68 20 Poly(ethylene terephthalate) film in rolls: 0 % - 31.12.2025 0.8005 ex39209928 48 Thermoplastic polyurethane foil in rolls, with: 0 % - 31.12.2025 0.8024 ex56031410 20 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: 0 % m2 31.12.2023 0.8028 ex69091900 40 Ceramic-carbon absorption cartridges with the following characteristics: of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles 0 % p/st 31.12.2025 0.7913 ex75062000 20 Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: 0 % - 31.12.2025 0.7997 ex76169990 35 Aluminium plate with: equipped with a polypropylene tape with: for use in the manufacture of lithium-ion battery cells for motor vehicle batteries 3 % - 31.12.2021 0.7966 ex81041900 10 Unwrought magnesium containing 93 % or more but not more than 99,7 % by weight of magnesium 0 % - 31.12.2025 0.7942 ex81089030 35 Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm 0 % - 31.12.2025 0.8012 ex84068200 10 Industrial steam turbine with: 0 % - 31.12.2025 0.7961 ex84099100 ex84819000 55 60 Nozzle body for the regulation of angle and distribution of fuel injection: 0 % - 31.12.2025 0.7965 ex84099100 75 Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: 0 % - 31.12.2025 0.7967 ex84099100 ex84819000 80 70 Nozzle needle for opening and closing the flow of fuel in the engine, with: 0 % - 31.12.2025 0.7969 ex84133020 40 High-pressure plunger pump for direct diesel injection, with: 0 % - 31.12.2025 0.7970 ex84133020 50 High-pressure plunger pump for direct diesel injection: 0 % - 31.12.2025 0.7996 ex84189990 20 Aluminium connecting block for connecting to a condenser manifold in welding process: 0 % - 31.12.2025 0.8004 ex84189990 30 Receiver dryer profile for connecting to a condenser manifold in welding process with: 0 % - 31.12.2025 0.7979 ex84798997 55 Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode 0.8 % - 31.12.2021 0.7982 ex84798997 65 Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line 0.8 % - 31.12.2021 0.7964 ex84799070 40 Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: 0 % - 31.12.2025 0.7968 ex84813091 ex84813099 30 50 Mechanical check (non-return) valve for opening and closing of the flow of fuel: 0 % - 31.12.2025 0.7960 ex84818059 ex84819000 70 80 Flow-control valve 0 % - 31.12.2025 0.7972 ex85272900 ex85299065 10 38 Satellite radio receiver module: for use in the manufacture of products falling under heading 8527 0 % - 31.12.2025 0.7987 ex87085020 ex87085055 15 50 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened 0 % - 31.12.2025 0.7988 ex87085020 ex87085099 25 45 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: 0 % - 31.12.2025 0.7989 ex87085020 ex87085099 35 50 Inboard constant velocity joint tripod housing, with: 0 % - 31.12.2025 0.7990 ex87085020 ex87085099 45 55 Outboard constant velocity joint inner race, part of the vehicle’s drive system, with: 0 % - 31.12.2025 0.7991 ex87085020 ex87085099 55 60 Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with: 0 % - 31.12.2025 0.7973 ex90021100 23 Lenses with: 0 % - 31.12.2025

a secondary particle structure which is aggregated from smaller primary particles,

without coating on the surface,

particle size represented by d50 value of 13,5 μm (± 0,5),

specific surface area (measured by BET) less than 2,0 m2/g,

tap density: 1,10 ~ 1,70 g/cm3,

specific Discharge Capacity of 351,0 mAh/g (± 3,0),

initial efficiency of 94,0 % (± 1,0)

specific surface area (measured by BET) of 0,8 m2/g (± 0,25),

tap density: 0,85 g/cm3 (± 0,10),

particle size represented by d50 value of 21,0 μm (± 2,0),

specific discharge capacity of 351,0 mAh/g (± 3,0),

initial efficiency of 94,0 % (± 2,0)

80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),

not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate

88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),

not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)

90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and

10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)

90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and

10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)

matt surface texture on both sides,

a thickness of more than 50 μm but not more than 200 μm,

a width of 800 mm or more, but not more than 1500 mm, and

a length of 915 m or more, but not more 2500 m,

with a thickness of 50 μm or more but not more than 350 μm, and

covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm

a width of 900 mm or more but not more than 1016 mm,

a matt finish,

a thickness of 0,4 mm (± 8 %),

an elongation at break of 480 % or more (ASTM D412 (Die C)),

a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),

a Shore A hardness of 90 (± 3) (ASTM D2240),

a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),

a melting point of 165°C (± 10 °C)

of weight of 160 g/m2 or more but not more than 300 g/m2

laminated on one side with a membrane or a membrane and aluminium

with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M

pleatable

extruded fired ceramic bound multicellular cylindrical structure,

10 % or more by weight but not more than 35 % by weight of activated carbon,

65 % or more by weight but not more than 90 % by weight of ceramic binder,

with a diameter of 29 mm or more but not more than 41 mm,

a length of not more than 150 mm,

fired at temperature of 800 °C or more, and

for vapours adsorption,

a thickness of 0,5 mm or more but not more than 3 mm,

a width of 250 mm or more but not more than 1219 mm

a length of 36 mm or more but not more than 49 mm,

a width of 29,8 mm or more but not more than 45,2 mm,

a thickness of 0,18 mm or more but not more than 0,66 mm,

a length of 6,5 mm or more but not more than 16,5 mm,

a width of 39 mm or more but not more than 56 mm,

characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,

resistance to influence of electrolyte,

an output of 5 MW or more but not more than 40 MW,

designed for a pressure of not more than 140 bar and a temperature of not more than 540 °C,

equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar

of a cylindrical shape,

made of stainless steel,

with 4 or more, but not more than 16 holes,

with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute

an inlet diameter of 2 mm or more, but not more than 10 mm,

an outlet diameter of 2 mm or more, but not more than 10 mm,

an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,

a plastic covering moulded around a stainless steel tube

2 holes,

4 grooves,

a diameter of 3 mm or more, but not more than 6 mm,

a length of 25 mm or more, but not more than 35 mm,

made of stainless steel with hard-chrome plating

an operating pressure of not more than 275 MPa,

a camshaft,

a fluid discharging of 15 cm3 per minute or more, but not more than 1800 cm3 per minute,

an electric pressure regulating valve

with an operating pressure of not more than 275 MPa,

designed to contact the crankshaft,

with an electromagnetic valve

hardened to T6 or T5 temper,

with a weight of not more than 150 g,

with a length of 20 mm or more but not more than 150 mm,

with a fixing rail in one piece

a braze flatness of not more than 0,2 mm,

a weight of 100 g or more but not more than 600 g,

a fixing rail in one piece

of a circular shape,

made of steel alloy with sintering process,

with not more than 8 oil chambers,

with a Rockwell hardness of 55 or more,

with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3

with an operating pressure of not more than 250 MPa,

with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,

with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,

made of steel

made of steel,

with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,

with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm

with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm,

comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,

being able to process radio frequency signals,

with a medium frequency unit,

6 ball tracks or more but not more than 8, with

a thread,

an external involute spline with 21 or more but not more than 38 teeth,

for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,

forged, turned, milled and hardened

an outer diameter of 67,0 mm or more but not more than 99,0 mm,

3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,

an external spline with 21 teeth or more but not more than 41,

forged, turned, rolled and hardened

6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,

forged, turned, milled, broached and hardened

3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,

forged, turned, broached and hardened

motorized focus, zoom, aperture,

electronically switchable infrared cut filter,

an adjustable focal length not less than 2,7 mm and not more than 55 mm,

a weight of not more than 100 g,

a length of less than 70 mm,

a diameter of not more than 60 mm

Versions

1. 2020-12-18