Address https://gelex.eu/eli/EU/regulation/2020/875@2020-06-15/en

Contents

1. Preamble
2. 1. Article 1
   2. Article 2
3. ANNEX
4. ANNEX

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union, and thereby avoid any disturbances in the market for those products, autonomous tariff quotas were opened by Council Regulation (EU) No 1388/2013. Within those tariff quotas, products can be imported into the Union at reduced or zero duty rates.

(2) As it is in the Union’s interest to ensure an adequate supply of certain industrial products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new tariff quotas for order numbers 09.2580, 09.2581 and 09.2583 at zero duty rates for appropriate quantities of those products.

(3) As is it in the Union’s interest to ensure an adequate supply of certain industrial products, the amounts for the tariff quotas for order numbers 09.2634 and 09.2668 should be increased.

(4) As the scope of the tariff quota for order number 09.2652 has become inadequate to fulfil the needs of economic operators in the Union, the description of the product covered by that tariff quota should be amended.

(5) For the tariff quota for order number 09.2588, the quota period should be extended until 31 December 2020, because that tariff quota was opened for a period of six months only but it is still in the Union’s interest to maintain it.

(6) The substances Dimethyl Sulphate (CAS RN 77-78-1) with a purity of at least 99 %, 2-Methylaniline (CAS RN 95-53-4) with a purity by weight of at least 99 % and 4,4'-Methanediyldianiline (CAS RN 101-77-9) with a purity by weight of at least 97 % are included on the candidate list referred to in Article 59 of Regulation (EC) No 1907/2006 of the European Parliament and of the Council and the substance with CAS RN 101-77-9 is included in Annex XIV to that Regulation. For that reason, existing tariff quotas for those substances should be progressively closed and any newly opened tariff quotas should apply for a limited period. Therefore, the tariff quotas with order numbers 09.2648 and 09.2730 should apply until 31 December 2020 with a conventional rate of duty at 2 %. In addition, the tariff quota with order number 09.2590 should be closed and a new tariff quota with order number 09.2582 should be opened until 31 December 2020 with a conventional rate of duty at 2 %.

(7) Taking into account the amendments to be made, and for the sake of clarity, the Annex to Regulation (EU) No 1388/2013 should be replaced.

(8) In order to avoid any interruption of the application of the tariff quota scheme, and to comply with the guidelines in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff quotas for the products concerned should apply from 1 July 2020. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1388/2013 is replaced by the text appearing in the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 July 2020.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 15 June 2020. For the Council The President A. Metelko-Zgombić

ANNEX

ANNEX

(1) 60 % (± 10 %) of crude protein, (2) 5 % (± 3 %) of crude fibre, (3) 5 % (± 3 %) of crude ash, and (4) at least 3 % but not more than 6,9 % of starch, (5) at least 90 % by weight of saturates, and (6) not more than 0,03 % by weight of sulphur, (7) a viscosity index of at least 80 but less than 120, and (8) a kinematic viscosity of at least 5,0 cSt at 100 °C but not more than 13,0 cSt at 100 °C (9) a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and (10) a melting point of at least 49 °C but not more than 54 °C, (11) a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and (12) a melting point of at least 110 °C but not more than 125 °C, (13) at least 28 % but not more than 55 % of 4-monononyldiphenylamine, (14) at least 45 % but not more than 65 % of 4,4'-dinonyldiphenylamine, and (15) not more than 5 % of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine, (16) at least 60 % but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), (17) at least 8 % but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), (18) at least 5 % but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), (19) not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and (20) not more than 1 % of ethyl chloride (CAS RN 75-00-3) (21) at least 55 % but not more than 78 % of dimethyl glutarate (CAS RN 1119-40-0), (22) at least 10 % but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and (23) not more than 35 % of dimethyl succinate (CAS RN 106-65-0) (24) at least 60 % but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and (25) at least 20 % but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4) (26) a resin acid content not exceeding 30 % by weight, (27) an acid number not exceeding 110, and (28) a melting point of at least 100 °C (29) at least 75 % of sterols, (30) not more than 25 % of stanols, (31) containing by weight at least 17,5 % but not more than 20 %, of hydroxyl groups, and (32) with a median particle size (D50) of more than 0,6 mm (33) a weight average molecular weight (Mw) of not more than 900000, (34) an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, (35) an ethanol content of not more than 1 % by weight, (36) an isopropanol content of not more than 0,5 % by weight (37) EN 4364 (MIL-P-5425E) and DTD5592A, or (38) EN 4365 (MIL-P-8184) and DTD5592A (39) three layers, (40) one outer layer consists of acrylic fabric, (41) the other outer layer consists of polyester fabric, (42) the middle layer consists of chlorobutyl rubber, (43) the middle layer has a weight of at least 452 g/m2 but not more than 569 g/m2, (44) the textile fabric has a total weight of at least 952 g/m2 but not more than 1159 g/m2, and (45) the textile fabric has a total thickness of at least 0,8 mm but not more than 4 mm, (46) extruded fired ceramic bound multicellular cylindrical structure, (47) at least 10 % by weight but not more than 30 % by weight of activated carbon, (48) at least 70 % by weight but not more than 90 % by weight of ceramic binder, (49) a diameter of at least 29 mm but not more than 41mm, (50) a length of not more than 150 mm, (51) fired at a temperature of at least 800 °C, and (52) for vapours adsorption (53) composed of continuous glass filaments of 9 μm (±0,5 μm), (54) measuring at least 200 tex but not more than 680 tex, (55) not containing any calcium oxide, and (56) with a breaking strength of more than 3550 MPa determined by ASTM D2343-09, (57) a layer of a silicon nitride ceramic with a thickness of at least 0,32 mm (±0,1 mm) but not more than 1,0 mm (±0,1 mm), (58) covered on both sides with a foil of refined copper with a thickness of 0,8 mm (±0,1 mm), and (59) on one side partially covered with a coating of silver (60) consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, (61) covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, (62) with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, (63) with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, (64) with a comparative tracking index (CTI) of at least 600 (65) of an alloy conforming to standards 5182-H19 or 5052-H19, (66) in rolls with an outside diameter of at least 1250 mm but not more than 1350 mm, (67) of a thickness (tolerance –0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, (68) of a width (tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, (69) with a camber tolerance of not more than 0,4 mm/750 mm, (70) of a flatness measurement: I-unit ± 4, (71) with a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and (72) of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %, (73) of a purity by weight of at least 98 % but not more than 99,5 %, and (74) with a particle size of at least 0,2 mm but not more than 0,8 mm (75) milled threaded fittings with a diameter of at least 10 mm but not more than 36,8 mm, and (76) drilled fuel channels with a diameter of at least 3,5 mm but not more than 10 mm, (77) continuously or centrifugally cast, (78) turned, (79) containing by weight at least 35 % but not more than 38 % of zinc, (80) containing by weight at least 0,75 % but not more than 1,25 % of lead, (81) containing by weight at least 1,0 % but not more than 1,4 % of aluminium, and (82) with a tensile strength of at least 415 Pa, (83) a touch panel, (84) at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings, (85) a diagonal screen measurement of at least 15 cm but not more than 21 cm, (86) a backlight, (87) a LVDS (Low Voltage Differential Signalling) and a power supply connector, (88) a viewing angle of at least 70 degrees, and (89) a luminance of at least 715 cd/m2, (90) whether or not equipped with prisms/lenses, and (91) whether or not fitted with connector(s) Anx. annex. Order number CN code TARIC Description Quota period Quota volume Quota duty (%) 09.2637 ex07104000 ex20058000 20 30 Corn cobs (Zea mays var. saccharata) whether or not cut, with a diameter of at least 10 mm but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking 1.1.-31.12. 550 tonnes 0 % 09.2849 ex07108069 10 Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals 1.1.-31.12. 700 tonnes 0 % 09.2664 ex20086039 30 Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products 1.1.-31.12. 1000 tonnes 10 % 09.2740 ex23099031 87 Soya bean protein concentrate containing by weight: for use in the manufacture of animal feed products 1.1.-31.12. 30000 tonnes 0 % 09.2913 ex24011035 ex24011070 ex24011095 ex24011095 ex24011095 ex24012035 ex24012070 ex24012095 ex24012095 ex24012095 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, with a custom value of at least EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 24021000 1.1.-31.12. 6000 tonnes 0 % 09.2587 ex27101981 ex27101999 20 40 Catalytically hydroisomerised and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: and with 1.7.-31.12. 200000 tonnes 0 % 09.2828 27122090 Paraffin wax containing by weight less than 0,75 % of oil 1.4.-31.10. 60000 tonnes 0 % 09.2600 ex27129039 10 Slack wax (CAS RN 64742-61-6) 1.1.-31.12. 100000 tonnes 0 % 09.2928 ex28112200 40 Silica filler in the form of granules, with a purity by weight of at least 97 % of silicon dioxide 1.1.-31.12. 1700 tonnes 0 % 09.2806 ex28259040 30 Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8) 1.1.-31.12. 12000 tonnes 0 % 09.2872 ex28332980 40 Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight at least 48 % but not more than 52 % of caesium sulphate 1.1.-31.12. 200 tonnes 0 % 09.2837 ex29037930 20 Bromochloromethane (CAS RN 74-97-5) 1.1.-31.12. 600 tonnes 0 % 09.2933 ex29039980 30 1,3-Dichlorobenzene (CAS RN 541-73-1) 1.1.-31.12. 2600 tonnes 0 % 09.2700 ex29051200 10 Propan-1-ol (propyl alcohol) (CAS RN 71-23-8) 1.1.-31.12. 15000 tonnes 0 % 09.2830 ex29061900 40 Cyclopropylmethanol (CAS RN 2516-33-8) 1.1.-31.12. 20 tonnes 0 % 09.2851 ex29071200 10 o-Cresol (CAS RN 95-48-7) with a purity by weight of at least 98,5 % 1.1.-31.12. 20000 tonnes 0 % 09.2704 ex29094980 20 2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9) 1.1.-31.12. 500 tonnes 0 % 09.2624 29124200 Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) (CAS RN 121-32-4) 1.1.-31.12. 1950 tonnes 0 % 09.2683 ex29141990 50 Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet form 1.1.-31.12. 200 tonnes 0 % 09.2852 ex29142900 60 Cyclopropyl methyl ketone (CAS RN 765-43-5) 1.1.-31.12. 300 tonnes 0 % 09.2638 ex29152100 10 Acetic acid (CAS RN 64-19-7) of a purity by weight of at least 99 % 1.1.-31.12. 1000000 tonnes 0 % 09.2972 29152400 Acetic anhydride (CAS RN 108-24-7) 1.1.-31.12. 50000 tonnes 0 % 09.2679 29153200 Vinyl acetate (CAS RN 108-05-4) 1.1.-31.12. 400000 tonnes 0 % 09.2728 ex29159070 85 Ethyl trifluoroacetate (CAS RN 383-63-1) 1.1.-31.12. 400 tonnes 0 % 09.2665 ex29161995 30 Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5) 1.1.-31.12. 8250 tonnes 0 % 09.2684 ex29163990 28 2,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5) 1.1.-31.12. 400 tonnes 0 % 09.2599 ex29171100 40 Diethyl oxalate (CAS RN 95-92-1) 1.1.-31.12. 500 tonnes 0 % 09.2769 ex29171390 10 Dimethyl sebacate (CAS RN 106-79-6) 1.1.-31.12. 1000 tonnes 0 % 09.2634 ex29171980 40 Dodecanedioic acid (CAS RN 693-23-2) with a purity by weight of more than 98,5 % 1.7.-31.12. 4000 tonnes 0 % 09.2808 ex29182200 10 O-Acetylsalicylic acid (CAS RN 50-78-2) 1.1.-31.12. 120 tonnes 0 % 09.2646 ex29182900 75 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12. 380 tonnes 0 % 09.2647 ex29182900 80 Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with: for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12. 140 tonnes 0 % 09.2975 ex29183000 10 Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421-28-5) 1.1.-31.12. 1000 tonnes 0 % 09.2688 ex29202900 70 Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4) 1.1.-31.12. 6000 tonnes 0 % 09.2648 ex29209010 75 Dimethyl Sulphate (CAS RN 77-78-1) with a purity of at least 99 % 1.7.-31.12. 9000 tonnes 2 % 09.2598 ex29211999 75 Octadecylamine (CAS RN 124-30-1) 1.1.-31.12. 400 tonnes 0 % 09.2649 ex29212900 60 Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5) 1.1.-31.12. 1700 tonnes 0 % 09.2682 ex29214100 10 Aniline (CAS RN 62-53-3) with a purity by weight of at least 99 % 1.1.-31.12. 150000 tonnes 0 % 09.2617 ex29214200 89 4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3) 1.1.-31.12. 500 tonnes 0 % 09.2582 ex29214300 80 2-Methylaniline (CAS RN 95-53-4) with a purity by weight of at least 99 % 1.7.-31.12. 1999 tonnes 2 % 09.2602 ex29215119 10 O-Phenylenediamine (CAS RN 95-54-5) 1.1.-31.12. 1800 tonnes 0 % 09.2730 ex29215990 85 4,4'-Methanediyldianiline (CAS RN 101-77-9) with a purity by weight of at least 97 %, in the form of granules, for use in the manufacture of prepolymers 1.7.-31.12. 100 tonnes 2 % 09.2591 ex29224100 10 L-Lysine hydrochloride (CAS RN 657-27-2) 1.1.-31.12. 445000 tonnes 0 % 09.2592 ex29225000 25 L-Threonine (CAS RN 72-19-5) 1.1.-31.12. 166000 tonnes 0 % 09.2854 ex29241900 85 3-iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6) 1.1.-31.12. 250 tonnes 0 % 09.2874 ex29242970 87 Paracetamol (INN) (CAS RN 103-90-2) 1.1.-31.12. 20000 tonnes 0 % 09.2742 ex29261000 10 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of Chapter 55 and Heading 6815 1.1.-31.12. 60000 tonnes 0 % 09.2583 ex29261000 20 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of Headings 2921, 2924, 3906 and 4002 1.7.-31.12. 20000 tonnes 0 % 09.2856 ex29269070 84 2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9) 1.1.-31.12. 900 tonnes 0 % 09.2708 ex29280090 15 Monomethylhydrazine (CAS RN 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 % (± 5 %) 1.1.-31.12. 900 tonnes 0 % 09.2581 ex29291000 25 1,5-Naphthylene diisocyanate (CAS RN 3173-72-6) with a purity by weight of at least 90 % 1.7.-31.12. 205 tonnes 0 % 09.2685 ex29299000 30 Nitroguanidine (CAS RN 556-88-7) 1.1.-31.12. 6500 tonnes 0 % 09.2597 ex29309098 94 Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6) 1.1.-31.12. 6000 tonnes 0 % 09.2596 ex29309098 96 2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8) 1.1.-31.12. 300 tonnes 0 % 09.2580 ex29319000 75 Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene 1.7.-31.12. 83 tonnes 0 % 09.2842 29321200 2-Furaldehyde (furfuraldehyde) 1.1.-31.12. 10000 tonnes 0 % 09.2955 ex29321900 60 Flurtamone (ISO) (CAS RN 96525-23-4) 1.1.-31.12. 300 tonnes 0 % 09.2696 ex29322090 25 Decan-5-olide (CAS RN 705-86-2) 1.1.-31.12. 6000 kilograms 0 % 09.2697 ex29322090 30 Dodecan-5-olide (CAS RN 713-95-1) 1.1.-31.12. 6000 kilograms 0 % 09.2812 ex29322090 77 Hexan-6-olide (CAS RN 502-44-3) 1.1.-31.12. 4000 tonnes 0 % 09.2858 29329300 Piperonal (CAS RN 120-57-0) 1.1.-31.12. 220 tonnes 0 % 09.2673 ex29333999 43 2,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5) 1.1.-31.12. 1000 tonnes 0 % 09.2674 ex29333999 44 Chlorpyrifos (ISO) (CAS RN 2921-88-2) 1.1.-31.12. 9000 tonnes 0 % 09.2880 ex29335995 39 Ibrutinib (INN) (CAS RN 936563-96-1) 1.1.-31.12. 5 tonnes 0 % 09.2860 ex29336980 30 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) 1.1.-31.12. 600 tonnes 0 % 09.2595 ex29339980 49 1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) 1.1.-31.12. 40 tonnes 0 % 09.2658 ex29339980 73 5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5) 1.1.-31.12. 400 tonnes 0 % 09.2593 ex29349990 67 5-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6) 1.1.-31.12. 45000 kilograms 0 % 09.2675 ex29359090 79 4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8) 1.1.-31.12. 45000 tonnes 0 % 09.2710 ex29359090 91 2,4,4-Trimethylpentan-2-aminium (3R,5S,6E)-7-{2-[(ethylsulfonyl)amino]-4-(4-fluorophenyl)-6-(propan-2-yl)pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 917805-85-7) 1.1.-31.12. 5000 kilograms 0 % 09.2945 ex29400000 20 D-Xylose (CAS RN 58-86-6) 1.1.-31.12. 400 tonnes 0 % 09.2686 ex32041100 75 Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of at least 99 % by weight 1.1.-31.12. 250 tonnes 0 % 09.2676 ex32041700 14 Preparations based on colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of at least 60 % but less than 85 % by weight 1.1.-31.12. 50 tonnes 0 % 09.2698 ex32041700 30 Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of at least 60 % by weight 1.1.-31.12. 150 tonnes 0 % 09.2659 ex38029000 19 Soda flux calcinated diatomaceous earth 1.1.-31.12. 35000 tonnes 0 % 09.2908 ex38040000 10 Sodium lignosulphonate (CAS RN 8061-51-6) 1.1.-31.12. 40000 tonnes 0 % 09.2889 38051090 Sulphate turpentine 1.1.-31.12. 25000 tonnes 0 % 09.2935 ex38061000 10 Rosin and resin acids obtained from fresh oleoresins 1.1.-31.12. 280000 tonnes 0 % 09.2832 ex38089290 40 Preparation containing at least 38 % but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion 1.1.-31.12. 500 tonnes 0 % 09.2876 ex38112900 55 Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight: used for the manufacture of lubricating oils 1.1.-31.12. 900 tonnes 0 % 09.2814 ex38159090 76 Catalyst consisting of titanium dioxide and tungsten trioxide 1.1.-31.12. 3000 tonnes 0 % 09.2820 ex38247900 10 Mixtures containing by weight: 1.1.-31.12. 6000 tonnes 0 % 09.2644 ex38249992 77 Preparation containing by weight: 1.1.-31.12. 10000 tonnes 0 % 09.2681 ex38249992 85 Mixture of bis[3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6) 1.1.-31.12. 9000 tonnes 0 % 09.2650 ex38249992 87 Acetophenone (CAS RN 98-86-2) with a purity by weight of at least 60 % but not more than 90 % 1.1.-31.12. 2000 tonnes 0 % 09.2888 ex38249992 89 Mixture of tertiary alkyldimethyl amines containing by weight: 1.1.-31.12. 25000 tonnes 0 % 09.2829 ex38249993 43 Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, with the following characteristics: 1.1.-31.12. 1600 tonnes 0 % 09.2907 ex38249993 67 Mixture of phytosterols, in the form of powder, containing by weight: for use in the manufacture of stanols/sterols or stanol/sterol esters 1.1.-31.12. 2500 tonnes 0 % 09.2639 39053000 Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups 1.1.-31.12. 15000 tonnes 0 % 09.2671 ex39059990 81 Poly(vinyl butyral)(CAS RN 63148-65-2): 1.1.-31.12. 12500 tonnes 0 % 09.2846 ex39074000 25 Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of at least 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of at least 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2) 1.1.-31.12. 2000 tonnes 0 % 09.2723 ex39119019 10 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4'-biphenylene) 1.1.-31.12. 5000 tonnes 0 % 09.2816 ex39121100 20 Cellulose acetate flakes 1.1.-31.12. 75000 tonnes 0 % 09.2864 ex39131000 10 Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3) 1.1.-31.12. 10000 tonnes 0 % 09.2641 ex39139000 87 Sodium hyaluronate, non-sterile, with: 1.1.-31.12. 200 kilograms 0 % 09.2661 ex39205100 50 Sheets of polymethylmethacrylate conforming to standards: 1.1.-31.12. 100 tonnes 0 % 09.2645 ex39211400 20 Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm) 1.1.-31.12. 1700 tonnes 0 % 09.2848 ex55051010 10 Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66) 1.1.-31.12. 10000 tonnes 0 % 09.2721 ex59069990 20 Woven and laminated rubberised textile fabric with the following characteristics: used for the manufacture of the retractable roof of motor vehicles 1.1.-31.12. 375000 square metres 0 % 09.2594 ex69091900 55 Ceramic-carbon absorption cartridge with the following characteristics: of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles 1.1.-31.12. 1000000 pieces 0 % 09.2866 ex70191200 ex70191200 06 26 S glass stratifils (rovings): for use in the manufacture of aeronautics 1.1.-31.12. 1000 tonnes 0 % 09.2628 ex70195200 10 Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2 (± 10 g/m2), of a type used in rolling insect screens with fixed frames 1.1.-31.12. 3000000 square metres 0 % 09.2799 ex72024990 10 Ferro-chromium containing at least 1,5 % but not more than 4 % by weight of carbon and not more than 70 % of chromium 1.1.-31.12. 50000 tonnes 0 % 09.2652 ex74091100 ex74101100 30 40 Refined copper foil and strips, electrolytically manufactured, with a thickness of at least 0,015 mm 1.1.-31.12. 1020 tonnes 0 % 09.2734 ex74091900 20 Plates or sheets consisting of: 1.1.-31.12. 7000000 pieces 0 % 09.2662 ex74102100 55 Plates: 1.1.-31.12. 80000 square metres 0 % 09.2834 ex76042910 20 Aluminium alloy rods with a diameter of at least 200 mm but not more than 300 mm 1.1.-31.12. 2000 tonnes 0 % 09.2835 ex76042910 30 Aluminium alloy rods with a diameter of at least 300,1 mm but not more than 533,4 mm 1.1.-31.12. 1000 tonnes 0 % 09.2736 ex76071190 83 Aluminium and magnesium alloy strip or foil: for use in the manufacture of slats for blinds 1.1.-31.12. 600 tonnes 0 % 09.2722 81041100 Unwrought magnesium, containing at least 99,8 % by weight of magnesium 1.1.-31.12. 120000 tonnes 0 % 09.2840 ex81043000 20 Magnesium powder: 1.1.-31.12. 2000 tonnes 0 % 09.2629 ex83024900 91 Aluminium telescopic handle for use in the manufacture of luggage 1.1.-31.12. 1500000 pieces 0 % 09.2720 ex84139100 50 Pump head for two cylinder high pressure pump made of forged steel, with: of a kind used in diesel injection systems 1.1.-31.12. 65000 pieces 0 % 09.2738 ex84829900 30 Brass cages with the following characteristics: of a kind used for the manufacture of ball bearings 1.1.-31.12. 50000 pieces 0 % 09.2763 ex85014020 ex85014080 40 30 Electric AC commutator motor, single-phase, with an output of at least 250 W, an input power of at least 700 W but not more than 2700 W, an external diameter of more than 120 mm (±0,2 mm) but not more than 135 mm (±0,2 mm), a rated speed of more than 30000 rpm but not more than 50000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners 1.1.-31.12 2000000 pieces 0 % 09.2588 ex85299092 56 LCD display with: for use in the manufacture of motor vehicles of Chapter 87 1.7.-31.12. 450000 pieces 0 % 09.2672 ex85299092 ex94054039 75 70 Printed circuit board with LED diodes: for the manufacture of backlight units for goods of Heading 8528 1.1.-31.12. 115000000 pieces 0 % 09.2003 ex85437090 63 Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm × 30 mm 1.1.-31.12. 1400000 pieces 0 % 09.2910 ex87089997 75 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 1.1.-31.12. 200000 pieces 0 % 09.2694 ex87141090 30 Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes 1.1.-31.12. 1000000 pieces 0 % 09.2668 ex87149110 ex87149110 ex87149110 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles) 1.7.-31.12. 250000 pieces 0 % 09.2589 ex87149110 ex87149110 ex87149110 23 33 70 Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (including electric bicycles) 1.1.-31.12. 8000000 pieces 0 % 09.2631 ex90019000 80 Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 901310 and 9015 1.1.-31.12. 5000000 pieces 0 %

ANNEX

Order number CN code TARIC Description Quota period Quota volume Quota duty (%) 09.2637 ex07104000 ex20058000 20 30 Corn cobs (Zea mays var. saccharata) whether or not cut, with a diameter of at least 10 mm but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking 1.1.-31.12. 550 tonnes 0 % 09.2849 ex07108069 10 Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals 1.1.-31.12. 700 tonnes 0 % 09.2664 ex20086039 30 Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products 1.1.-31.12. 1000 tonnes 10 % 09.2740 ex23099031 87 Soya bean protein concentrate containing by weight: for use in the manufacture of animal feed products 1.1.-31.12. 30000 tonnes 0 % 09.2913 ex24011035 ex24011070 ex24011095 ex24011095 ex24011095 ex24012035 ex24012070 ex24012095 ex24012095 ex24012095 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, with a custom value of at least EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 24021000 1.1.-31.12. 6000 tonnes 0 % 09.2587 ex27101981 ex27101999 20 40 Catalytically hydroisomerised and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: and with 1.7.-31.12. 200000 tonnes 0 % 09.2828 27122090 Paraffin wax containing by weight less than 0,75 % of oil 1.4.-31.10. 60000 tonnes 0 % 09.2600 ex27129039 10 Slack wax (CAS RN 64742-61-6) 1.1.-31.12. 100000 tonnes 0 % 09.2928 ex28112200 40 Silica filler in the form of granules, with a purity by weight of at least 97 % of silicon dioxide 1.1.-31.12. 1700 tonnes 0 % 09.2806 ex28259040 30 Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8) 1.1.-31.12. 12000 tonnes 0 % 09.2872 ex28332980 40 Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight at least 48 % but not more than 52 % of caesium sulphate 1.1.-31.12. 200 tonnes 0 % 09.2837 ex29037930 20 Bromochloromethane (CAS RN 74-97-5) 1.1.-31.12. 600 tonnes 0 % 09.2933 ex29039980 30 1,3-Dichlorobenzene (CAS RN 541-73-1) 1.1.-31.12. 2600 tonnes 0 % 09.2700 ex29051200 10 Propan-1-ol (propyl alcohol) (CAS RN 71-23-8) 1.1.-31.12. 15000 tonnes 0 % 09.2830 ex29061900 40 Cyclopropylmethanol (CAS RN 2516-33-8) 1.1.-31.12. 20 tonnes 0 % 09.2851 ex29071200 10 o-Cresol (CAS RN 95-48-7) with a purity by weight of at least 98,5 % 1.1.-31.12. 20000 tonnes 0 % 09.2704 ex29094980 20 2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9) 1.1.-31.12. 500 tonnes 0 % 09.2624 29124200 Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) (CAS RN 121-32-4) 1.1.-31.12. 1950 tonnes 0 % 09.2683 ex29141990 50 Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet form 1.1.-31.12. 200 tonnes 0 % 09.2852 ex29142900 60 Cyclopropyl methyl ketone (CAS RN 765-43-5) 1.1.-31.12. 300 tonnes 0 % 09.2638 ex29152100 10 Acetic acid (CAS RN 64-19-7) of a purity by weight of at least 99 % 1.1.-31.12. 1000000 tonnes 0 % 09.2972 29152400 Acetic anhydride (CAS RN 108-24-7) 1.1.-31.12. 50000 tonnes 0 % 09.2679 29153200 Vinyl acetate (CAS RN 108-05-4) 1.1.-31.12. 400000 tonnes 0 % 09.2728 ex29159070 85 Ethyl trifluoroacetate (CAS RN 383-63-1) 1.1.-31.12. 400 tonnes 0 % 09.2665 ex29161995 30 Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5) 1.1.-31.12. 8250 tonnes 0 % 09.2684 ex29163990 28 2,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5) 1.1.-31.12. 400 tonnes 0 % 09.2599 ex29171100 40 Diethyl oxalate (CAS RN 95-92-1) 1.1.-31.12. 500 tonnes 0 % 09.2769 ex29171390 10 Dimethyl sebacate (CAS RN 106-79-6) 1.1.-31.12. 1000 tonnes 0 % 09.2634 ex29171980 40 Dodecanedioic acid (CAS RN 693-23-2) with a purity by weight of more than 98,5 % 1.7.-31.12. 4000 tonnes 0 % 09.2808 ex29182200 10 O-Acetylsalicylic acid (CAS RN 50-78-2) 1.1.-31.12. 120 tonnes 0 % 09.2646 ex29182900 75 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12. 380 tonnes 0 % 09.2647 ex29182900 80 Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with: for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12. 140 tonnes 0 % 09.2975 ex29183000 10 Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421-28-5) 1.1.-31.12. 1000 tonnes 0 % 09.2688 ex29202900 70 Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4) 1.1.-31.12. 6000 tonnes 0 % 09.2648 ex29209010 75 Dimethyl Sulphate (CAS RN 77-78-1) with a purity of at least 99 % 1.7.-31.12. 9000 tonnes 2 % 09.2598 ex29211999 75 Octadecylamine (CAS RN 124-30-1) 1.1.-31.12. 400 tonnes 0 % 09.2649 ex29212900 60 Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5) 1.1.-31.12. 1700 tonnes 0 % 09.2682 ex29214100 10 Aniline (CAS RN 62-53-3) with a purity by weight of at least 99 % 1.1.-31.12. 150000 tonnes 0 % 09.2617 ex29214200 89 4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3) 1.1.-31.12. 500 tonnes 0 % 09.2582 ex29214300 80 2-Methylaniline (CAS RN 95-53-4) with a purity by weight of at least 99 % 1.7.-31.12. 1999 tonnes 2 % 09.2602 ex29215119 10 O-Phenylenediamine (CAS RN 95-54-5) 1.1.-31.12. 1800 tonnes 0 % 09.2730 ex29215990 85 4,4'-Methanediyldianiline (CAS RN 101-77-9) with a purity by weight of at least 97 %, in the form of granules, for use in the manufacture of prepolymers 1.7.-31.12. 100 tonnes 2 % 09.2591 ex29224100 10 L-Lysine hydrochloride (CAS RN 657-27-2) 1.1.-31.12. 445000 tonnes 0 % 09.2592 ex29225000 25 L-Threonine (CAS RN 72-19-5) 1.1.-31.12. 166000 tonnes 0 % 09.2854 ex29241900 85 3-iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6) 1.1.-31.12. 250 tonnes 0 % 09.2874 ex29242970 87 Paracetamol (INN) (CAS RN 103-90-2) 1.1.-31.12. 20000 tonnes 0 % 09.2742 ex29261000 10 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of Chapter 55 and Heading 6815 1.1.-31.12. 60000 tonnes 0 % 09.2583 ex29261000 20 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of Headings 2921, 2924, 3906 and 4002 1.7.-31.12. 20000 tonnes 0 % 09.2856 ex29269070 84 2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9) 1.1.-31.12. 900 tonnes 0 % 09.2708 ex29280090 15 Monomethylhydrazine (CAS RN 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 % (± 5 %) 1.1.-31.12. 900 tonnes 0 % 09.2581 ex29291000 25 1,5-Naphthylene diisocyanate (CAS RN 3173-72-6) with a purity by weight of at least 90 % 1.7.-31.12. 205 tonnes 0 % 09.2685 ex29299000 30 Nitroguanidine (CAS RN 556-88-7) 1.1.-31.12. 6500 tonnes 0 % 09.2597 ex29309098 94 Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6) 1.1.-31.12. 6000 tonnes 0 % 09.2596 ex29309098 96 2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8) 1.1.-31.12. 300 tonnes 0 % 09.2580 ex29319000 75 Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene 1.7.-31.12. 83 tonnes 0 % 09.2842 29321200 2-Furaldehyde (furfuraldehyde) 1.1.-31.12. 10000 tonnes 0 % 09.2955 ex29321900 60 Flurtamone (ISO) (CAS RN 96525-23-4) 1.1.-31.12. 300 tonnes 0 % 09.2696 ex29322090 25 Decan-5-olide (CAS RN 705-86-2) 1.1.-31.12. 6000 kilograms 0 % 09.2697 ex29322090 30 Dodecan-5-olide (CAS RN 713-95-1) 1.1.-31.12. 6000 kilograms 0 % 09.2812 ex29322090 77 Hexan-6-olide (CAS RN 502-44-3) 1.1.-31.12. 4000 tonnes 0 % 09.2858 29329300 Piperonal (CAS RN 120-57-0) 1.1.-31.12. 220 tonnes 0 % 09.2673 ex29333999 43 2,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5) 1.1.-31.12. 1000 tonnes 0 % 09.2674 ex29333999 44 Chlorpyrifos (ISO) (CAS RN 2921-88-2) 1.1.-31.12. 9000 tonnes 0 % 09.2880 ex29335995 39 Ibrutinib (INN) (CAS RN 936563-96-1) 1.1.-31.12. 5 tonnes 0 % 09.2860 ex29336980 30 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) 1.1.-31.12. 600 tonnes 0 % 09.2595 ex29339980 49 1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) 1.1.-31.12. 40 tonnes 0 % 09.2658 ex29339980 73 5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5) 1.1.-31.12. 400 tonnes 0 % 09.2593 ex29349990 67 5-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6) 1.1.-31.12. 45000 kilograms 0 % 09.2675 ex29359090 79 4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8) 1.1.-31.12. 45000 tonnes 0 % 09.2710 ex29359090 91 2,4,4-Trimethylpentan-2-aminium (3R,5S,6E)-7-{2-[(ethylsulfonyl)amino]-4-(4-fluorophenyl)-6-(propan-2-yl)pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 917805-85-7) 1.1.-31.12. 5000 kilograms 0 % 09.2945 ex29400000 20 D-Xylose (CAS RN 58-86-6) 1.1.-31.12. 400 tonnes 0 % 09.2686 ex32041100 75 Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of at least 99 % by weight 1.1.-31.12. 250 tonnes 0 % 09.2676 ex32041700 14 Preparations based on colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of at least 60 % but less than 85 % by weight 1.1.-31.12. 50 tonnes 0 % 09.2698 ex32041700 30 Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of at least 60 % by weight 1.1.-31.12. 150 tonnes 0 % 09.2659 ex38029000 19 Soda flux calcinated diatomaceous earth 1.1.-31.12. 35000 tonnes 0 % 09.2908 ex38040000 10 Sodium lignosulphonate (CAS RN 8061-51-6) 1.1.-31.12. 40000 tonnes 0 % 09.2889 38051090 Sulphate turpentine 1.1.-31.12. 25000 tonnes 0 % 09.2935 ex38061000 10 Rosin and resin acids obtained from fresh oleoresins 1.1.-31.12. 280000 tonnes 0 % 09.2832 ex38089290 40 Preparation containing at least 38 % but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion 1.1.-31.12. 500 tonnes 0 % 09.2876 ex38112900 55 Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight: used for the manufacture of lubricating oils 1.1.-31.12. 900 tonnes 0 % 09.2814 ex38159090 76 Catalyst consisting of titanium dioxide and tungsten trioxide 1.1.-31.12. 3000 tonnes 0 % 09.2820 ex38247900 10 Mixtures containing by weight: 1.1.-31.12. 6000 tonnes 0 % 09.2644 ex38249992 77 Preparation containing by weight: 1.1.-31.12. 10000 tonnes 0 % 09.2681 ex38249992 85 Mixture of bis[3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6) 1.1.-31.12. 9000 tonnes 0 % 09.2650 ex38249992 87 Acetophenone (CAS RN 98-86-2) with a purity by weight of at least 60 % but not more than 90 % 1.1.-31.12. 2000 tonnes 0 % 09.2888 ex38249992 89 Mixture of tertiary alkyldimethyl amines containing by weight: 1.1.-31.12. 25000 tonnes 0 % 09.2829 ex38249993 43 Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, with the following characteristics: 1.1.-31.12. 1600 tonnes 0 % 09.2907 ex38249993 67 Mixture of phytosterols, in the form of powder, containing by weight: for use in the manufacture of stanols/sterols or stanol/sterol esters 1.1.-31.12. 2500 tonnes 0 % 09.2639 39053000 Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups 1.1.-31.12. 15000 tonnes 0 % 09.2671 ex39059990 81 Poly(vinyl butyral)(CAS RN 63148-65-2): 1.1.-31.12. 12500 tonnes 0 % 09.2846 ex39074000 25 Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of at least 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of at least 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2) 1.1.-31.12. 2000 tonnes 0 % 09.2723 ex39119019 10 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4'-biphenylene) 1.1.-31.12. 5000 tonnes 0 % 09.2816 ex39121100 20 Cellulose acetate flakes 1.1.-31.12. 75000 tonnes 0 % 09.2864 ex39131000 10 Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3) 1.1.-31.12. 10000 tonnes 0 % 09.2641 ex39139000 87 Sodium hyaluronate, non-sterile, with: 1.1.-31.12. 200 kilograms 0 % 09.2661 ex39205100 50 Sheets of polymethylmethacrylate conforming to standards: 1.1.-31.12. 100 tonnes 0 % 09.2645 ex39211400 20 Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm) 1.1.-31.12. 1700 tonnes 0 % 09.2848 ex55051010 10 Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66) 1.1.-31.12. 10000 tonnes 0 % 09.2721 ex59069990 20 Woven and laminated rubberised textile fabric with the following characteristics: used for the manufacture of the retractable roof of motor vehicles 1.1.-31.12. 375000 square metres 0 % 09.2594 ex69091900 55 Ceramic-carbon absorption cartridge with the following characteristics: of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles 1.1.-31.12. 1000000 pieces 0 % 09.2866 ex70191200 ex70191200 06 26 S glass stratifils (rovings): for use in the manufacture of aeronautics 1.1.-31.12. 1000 tonnes 0 % 09.2628 ex70195200 10 Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2 (± 10 g/m2), of a type used in rolling insect screens with fixed frames 1.1.-31.12. 3000000 square metres 0 % 09.2799 ex72024990 10 Ferro-chromium containing at least 1,5 % but not more than 4 % by weight of carbon and not more than 70 % of chromium 1.1.-31.12. 50000 tonnes 0 % 09.2652 ex74091100 ex74101100 30 40 Refined copper foil and strips, electrolytically manufactured, with a thickness of at least 0,015 mm 1.1.-31.12. 1020 tonnes 0 % 09.2734 ex74091900 20 Plates or sheets consisting of: 1.1.-31.12. 7000000 pieces 0 % 09.2662 ex74102100 55 Plates: 1.1.-31.12. 80000 square metres 0 % 09.2834 ex76042910 20 Aluminium alloy rods with a diameter of at least 200 mm but not more than 300 mm 1.1.-31.12. 2000 tonnes 0 % 09.2835 ex76042910 30 Aluminium alloy rods with a diameter of at least 300,1 mm but not more than 533,4 mm 1.1.-31.12. 1000 tonnes 0 % 09.2736 ex76071190 83 Aluminium and magnesium alloy strip or foil: for use in the manufacture of slats for blinds 1.1.-31.12. 600 tonnes 0 % 09.2722 81041100 Unwrought magnesium, containing at least 99,8 % by weight of magnesium 1.1.-31.12. 120000 tonnes 0 % 09.2840 ex81043000 20 Magnesium powder: 1.1.-31.12. 2000 tonnes 0 % 09.2629 ex83024900 91 Aluminium telescopic handle for use in the manufacture of luggage 1.1.-31.12. 1500000 pieces 0 % 09.2720 ex84139100 50 Pump head for two cylinder high pressure pump made of forged steel, with: of a kind used in diesel injection systems 1.1.-31.12. 65000 pieces 0 % 09.2738 ex84829900 30 Brass cages with the following characteristics: of a kind used for the manufacture of ball bearings 1.1.-31.12. 50000 pieces 0 % 09.2763 ex85014020 ex85014080 40 30 Electric AC commutator motor, single-phase, with an output of at least 250 W, an input power of at least 700 W but not more than 2700 W, an external diameter of more than 120 mm (±0,2 mm) but not more than 135 mm (±0,2 mm), a rated speed of more than 30000 rpm but not more than 50000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners 1.1.-31.12 2000000 pieces 0 % 09.2588 ex85299092 56 LCD display with: for use in the manufacture of motor vehicles of Chapter 87 1.7.-31.12. 450000 pieces 0 % 09.2672 ex85299092 ex94054039 75 70 Printed circuit board with LED diodes: for the manufacture of backlight units for goods of Heading 8528 1.1.-31.12. 115000000 pieces 0 % 09.2003 ex85437090 63 Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm × 30 mm 1.1.-31.12. 1400000 pieces 0 % 09.2910 ex87089997 75 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 1.1.-31.12. 200000 pieces 0 % 09.2694 ex87141090 30 Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes 1.1.-31.12. 1000000 pieces 0 % 09.2668 ex87149110 ex87149110 ex87149110 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles) 1.7.-31.12. 250000 pieces 0 % 09.2589 ex87149110 ex87149110 ex87149110 23 33 70 Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles (including electric bicycles) 1.1.-31.12. 8000000 pieces 0 % 09.2631 ex90019000 80 Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 901310 and 9015 1.1.-31.12. 5000000 pieces 0 % (1) 60 % (± 10 %) of crude protein, (2) 5 % (± 3 %) of crude fibre, (3) 5 % (± 3 %) of crude ash, and (4) at least 3 % but not more than 6,9 % of starch, (5) at least 90 % by weight of saturates, and (6) not more than 0,03 % by weight of sulphur, (7) a viscosity index of at least 80 but less than 120, and (8) a kinematic viscosity of at least 5,0 cSt at 100 °C but not more than 13,0 cSt at 100 °C (9) a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and (10) a melting point of at least 49 °C but not more than 54 °C, (11) a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and (12) a melting point of at least 110 °C but not more than 125 °C, (13) at least 28 % but not more than 55 % of 4-monononyldiphenylamine, (14) at least 45 % but not more than 65 % of 4,4'-dinonyldiphenylamine, and (15) not more than 5 % of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine, (16) at least 60 % but not more than 90 % of 2-chloropropene (CAS RN 557-98-2), (17) at least 8 % but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), (18) at least 5 % but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), (19) not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and (20) not more than 1 % of ethyl chloride (CAS RN 75-00-3) (21) at least 55 % but not more than 78 % of dimethyl glutarate (CAS RN 1119-40-0), (22) at least 10 % but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and (23) not more than 35 % of dimethyl succinate (CAS RN 106-65-0) (24) at least 60 % but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and (25) at least 20 % but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4) (26) a resin acid content not exceeding 30 % by weight, (27) an acid number not exceeding 110, and (28) a melting point of at least 100 °C (29) at least 75 % of sterols, (30) not more than 25 % of stanols, (31) containing by weight at least 17,5 % but not more than 20 %, of hydroxyl groups, and (32) with a median particle size (D50) of more than 0,6 mm (33) a weight average molecular weight (Mw) of not more than 900000, (34) an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, (35) an ethanol content of not more than 1 % by weight, (36) an isopropanol content of not more than 0,5 % by weight (37) EN 4364 (MIL-P-5425E) and DTD5592A, or (38) EN 4365 (MIL-P-8184) and DTD5592A (39) three layers, (40) one outer layer consists of acrylic fabric, (41) the other outer layer consists of polyester fabric, (42) the middle layer consists of chlorobutyl rubber, (43) the middle layer has a weight of at least 452 g/m2 but not more than 569 g/m2, (44) the textile fabric has a total weight of at least 952 g/m2 but not more than 1159 g/m2, and (45) the textile fabric has a total thickness of at least 0,8 mm but not more than 4 mm, (46) extruded fired ceramic bound multicellular cylindrical structure, (47) at least 10 % by weight but not more than 30 % by weight of activated carbon, (48) at least 70 % by weight but not more than 90 % by weight of ceramic binder, (49) a diameter of at least 29 mm but not more than 41mm, (50) a length of not more than 150 mm, (51) fired at a temperature of at least 800 °C, and (52) for vapours adsorption (53) composed of continuous glass filaments of 9 μm (±0,5 μm), (54) measuring at least 200 tex but not more than 680 tex, (55) not containing any calcium oxide, and (56) with a breaking strength of more than 3550 MPa determined by ASTM D2343-09, (57) a layer of a silicon nitride ceramic with a thickness of at least 0,32 mm (±0,1 mm) but not more than 1,0 mm (±0,1 mm), (58) covered on both sides with a foil of refined copper with a thickness of 0,8 mm (±0,1 mm), and (59) on one side partially covered with a coating of silver (60) consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, (61) covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, (62) with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, (63) with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, (64) with a comparative tracking index (CTI) of at least 600 (65) of an alloy conforming to standards 5182-H19 or 5052-H19, (66) in rolls with an outside diameter of at least 1250 mm but not more than 1350 mm, (67) of a thickness (tolerance –0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, (68) of a width (tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, (69) with a camber tolerance of not more than 0,4 mm/750 mm, (70) of a flatness measurement: I-unit ± 4, (71) with a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and (72) of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %, (73) of a purity by weight of at least 98 % but not more than 99,5 %, and (74) with a particle size of at least 0,2 mm but not more than 0,8 mm (75) milled threaded fittings with a diameter of at least 10 mm but not more than 36,8 mm, and (76) drilled fuel channels with a diameter of at least 3,5 mm but not more than 10 mm, (77) continuously or centrifugally cast, (78) turned, (79) containing by weight at least 35 % but not more than 38 % of zinc, (80) containing by weight at least 0,75 % but not more than 1,25 % of lead, (81) containing by weight at least 1,0 % but not more than 1,4 % of aluminium, and (82) with a tensile strength of at least 415 Pa, (83) a touch panel, (84) at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings, (85) a diagonal screen measurement of at least 15 cm but not more than 21 cm, (86) a backlight, (87) a LVDS (Low Voltage Differential Signalling) and a power supply connector, (88) a viewing angle of at least 70 degrees, and (89) a luminance of at least 715 cd/m2, (90) whether or not equipped with prisms/lenses, and (91) whether or not fitted with connector(s)

60 % (± 10 %) of crude protein,

5 % (± 3 %) of crude fibre,

5 % (± 3 %) of crude ash, and

at least 3 % but not more than 6,9 % of starch,

at least 90 % by weight of saturates, and

not more than 0,03 % by weight of sulphur,

a viscosity index of at least 80 but less than 120, and

a kinematic viscosity of at least 5,0 cSt at 100 °C but not more than 13,0 cSt at 100 °C

a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and

a melting point of at least 49 °C but not more than 54 °C,

a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and

a melting point of at least 110 °C but not more than 125 °C,

at least 28 % but not more than 55 % of 4-monononyldiphenylamine,

at least 45 % but not more than 65 % of 4,4'-dinonyldiphenylamine, and

not more than 5 % of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine,

at least 60 % but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),

at least 8 % but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),

at least 5 % but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),

not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and

not more than 1 % of ethyl chloride (CAS RN 75-00-3)

at least 55 % but not more than 78 % of dimethyl glutarate (CAS RN 1119-40-0),

at least 10 % but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and

not more than 35 % of dimethyl succinate (CAS RN 106-65-0)

at least 60 % but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and

at least 20 % but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4)

a resin acid content not exceeding 30 % by weight,

an acid number not exceeding 110, and

a melting point of at least 100 °C

at least 75 % of sterols,

not more than 25 % of stanols,

containing by weight at least 17,5 % but not more than 20 %, of hydroxyl groups, and

with a median particle size (D50) of more than 0,6 mm

a weight average molecular weight (Mw) of not more than 900000,

an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,

an ethanol content of not more than 1 % by weight,

an isopropanol content of not more than 0,5 % by weight

EN 4364 (MIL-P-5425E) and DTD5592A, or

EN 4365 (MIL-P-8184) and DTD5592A

three layers,

one outer layer consists of acrylic fabric,

the other outer layer consists of polyester fabric,

the middle layer consists of chlorobutyl rubber,

the middle layer has a weight of at least 452 g/m2 but not more than 569 g/m2,

the textile fabric has a total weight of at least 952 g/m2 but not more than 1159 g/m2, and

the textile fabric has a total thickness of at least 0,8 mm but not more than 4 mm,

extruded fired ceramic bound multicellular cylindrical structure,

at least 10 % by weight but not more than 30 % by weight of activated carbon,

at least 70 % by weight but not more than 90 % by weight of ceramic binder,

a diameter of at least 29 mm but not more than 41mm,

a length of not more than 150 mm,

fired at a temperature of at least 800 °C, and

for vapours adsorption

composed of continuous glass filaments of 9 μm (±0,5 μm),

measuring at least 200 tex but not more than 680 tex,

not containing any calcium oxide, and

with a breaking strength of more than 3550 MPa determined by ASTM D2343-09,

a layer of a silicon nitride ceramic with a thickness of at least 0,32 mm (±0,1 mm) but not more than 1,0 mm (±0,1 mm),

covered on both sides with a foil of refined copper with a thickness of 0,8 mm (±0,1 mm), and

on one side partially covered with a coating of silver

consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,

with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

with a comparative tracking index (CTI) of at least 600

of an alloy conforming to standards 5182-H19 or 5052-H19,

in rolls with an outside diameter of at least 1250 mm but not more than 1350 mm,

of a thickness (tolerance –0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,

of a width (tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,

with a camber tolerance of not more than 0,4 mm/750 mm,

of a flatness measurement: I-unit ± 4,

with a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and

of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,

of a purity by weight of at least 98 % but not more than 99,5 %, and

with a particle size of at least 0,2 mm but not more than 0,8 mm

milled threaded fittings with a diameter of at least 10 mm but not more than 36,8 mm, and

drilled fuel channels with a diameter of at least 3,5 mm but not more than 10 mm,

continuously or centrifugally cast,

turned,

containing by weight at least 35 % but not more than 38 % of zinc,

containing by weight at least 0,75 % but not more than 1,25 % of lead,

containing by weight at least 1,0 % but not more than 1,4 % of aluminium, and

with a tensile strength of at least 415 Pa,

a touch panel,

at least one printed circuit board for simple slave device pixel addressing (Timing Controller function) and touch control, with EEPROM (Electrically Erasable Programmable Read-Only Memory) for display settings,

a diagonal screen measurement of at least 15 cm but not more than 21 cm,

a backlight,

a LVDS (Low Voltage Differential Signalling) and a power supply connector,

a viewing angle of at least 70 degrees, and

a luminance of at least 715 cd/m2,

whether or not equipped with prisms/lenses, and

whether or not fitted with connector(s)

Versions

1. 2020-06-15