Council Regulation (EU) 2021/1052 of 18 June 2021 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products
Grade B
mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.
Address https://gelex.eu/eli/EU/regulation/2021/1052@2021-06-18/en
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,
Having regard to the proposal from the European Commission,
Whereas:
(1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances in the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council (CCT duties) on those products have been suspended by Council Regulation (EU) No 1387/2013. Those products can be imported into the Union at reduced or zero duty rates.
(2) The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to grant a complete suspension of the CCT duties on those products.
(3) With a view to promoting integrated battery production in the Union in accordance with the communication from the Commission of 17 May 2018 entitled Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean, a partial suspension of the CCT duties should be granted in respect of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. The date for the mandatory review of those suspensions should be 31 December 2021, in order for that review to take into account the evolution of the battery sector in the Union.
(4) It is necessary to amend the product description and classification for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market.
(5) It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be deleted. Furthermore, the suspension of CCT duties for certain products listed in that Annex should be deleted as a result of the implementation of the agreement in the form of the Declaration on the Expansion of Trade in Information Technology Products, which reduced the duty rate for the products concerned to zero.
(6) Regulation (EU) No 1387/2013 should therefore be amended accordingly.
(7) In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2021. This Regulation should therefore enter into force as a matter of urgency,
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 July 2021.
This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 18 June 2021. For the Council The President J. Leão
ANNEX
ANNEX
The Annex to Regulation (EU) No 1387/2013 is amended as follows:
(1) the entries with the following serial numbers are deleted: 0.2938, 0.3108, 0.3139, 0.3141, 0.4179, 0.4197, 0.4734, 0.4735, 0.4883, 0.5312 and 0.5470;
(2) the following entries replace those entries that have the same serial numbers: Serial number CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review 0.3341 ex15159099 92 Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid 0 % - 31.12.2023 0.7674 ex29053200 20 (2S)-propane-1,2-diol (CAS RN 4254-15-3) with a purity by weight of 98 % or more 0 % - 31.12.2023 0.6003 ex29159070 27 Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more 0 % - 31.12.2023 0.3468 ex29161300 40 Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser 0 % - 31.12.2023 0.2941 ex29201900 40 Tolclofos-methyl (ISO) (CAS RN 57018-04-9) with a purity by weight of 96 % or more 0 % - 31.12.2023 0.4298 ex29302000 40 Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more 0 % - 31.12.2022 0.5920 ex29332990 28 Prochloraz (ISO) (CAS RN 67747-09-5) with purity by weight of 97 % or more 0 % - 31.12.2023 0.6987 ex29335995 52 6-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more 0 % - 31.12.2021 0.7815 ex29349990 82 Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more 0 % - 31.12.2024 0.7975 ex38011000 30 Artificial graphite in powder form, (CAS RN 7782-42-5) with: 1.8 % - 31.12.2021 0.4459 ex39199080 83 Reflector or diffuser sheets, in rolls, 0 % - 31.12.2022 0.5139 ex39201089 55 Ethylene vinyl acetate (EVA) film: 0 % - 31.12.2021 0.5167 ex39202029 94 Mono-axial oriented, co-extruded film: 0 % - 31.12.2022 0.2546 ex69039090 40 Silicon carbide reactor tubes and holders having a maximum service temperature of 1370 °C or more 0 % - 31.12.2023 0.8028 ex69091900 40 Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics: 0 % p/st 31.12.2025 0.6680 ex73269098 ex79070000 40 10 Iron, steel and/or zinc alloy weights: 0 % - 31.12.2025 0.4050 ex76071190 ex76071190 65 67 Plain aluminium foil with the following parameters: 3.7 % - 31.12.2021 0.7966 ex81041900 10 Unwrought magnesium containing 90 % or more but not more than 99,7 % by weight of magnesium 0 % - 31.12.2025 0.5097 ex81043000 35 Magnesium powder: 0 % - 31.12.2025 0.4133 ex84189910 ex84189910 71 79 Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles 0 % p/st 31.12.2021 0.6858 ex85011099 64 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: 0 % - 31.12.2021 0.6809 ex85013100 ex85013200 43 55 Automotive-ready, brushless and permanently excited direct current motor with: 0 % - 31.12.2025 0.7641 ex85076000 58 Prismatic lithium-ion electric accumulator with: 1.3 % - 31.12.2021 0.5356 ex85076000 75 Rectangular lithium-ion-accumulator with: 1.3 % - 31.12.2021 0.7856 ex87084020 ex87084050 70 60 Manual gearbox in cast aluminium housing for transverse installation with: 0 % - 31.12.2024 0.6583 ex87089910 ex87089997 60 50 Aluminium engine bracket, with dimensions of: equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: 0 % p/st 31.12.2024 0.7101 ex90011090 40 Fibre optic plates: 0 % - 31.12.2021 0.7590 ex90021100 18 Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with: 0 % - 31.12.2023
with or without coating on the surface,
particle size represented by d50 value of 15 μm (± 4),
specific surface area (measured by BET) less than 3,5 m2/g,
tap density: 1,3 g/m3 (± 0,5),
specific Discharge Capacity of 348 mAh/g (± 13),
initial efficiency above 93,0 %
for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or
for equal transmission and distribution of light, intended for LCD modules
with a raised relief surface with embossed undulations,
not laminated,
not cross-linked, and
with a thickness of more than 0,3 mm
consisting of 3 to 5 layers,
each layer mainly consisting of polypropylene and/or polyethylene,
each layer containing not more than 10 % by weight of other polymers,
whether or not containing titanium dioxide in the core layer,
of an overall thickness of not more than 75 μm
extruded fired ceramic bound multicellular cylindrical structure,
5 % or more by weight but not more than 70 % by weight of activated carbon,
30 % or more by weight but no more than 90 % by weight of ceramic binder,
with a diameter of 29 mm or more but no more than 41 mm,
a length of not more than 150 mm,
fired at temperature of 800 °C or more
with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,
whether or not with parts of other material,
whether or not with parts of other metals,
whether or not surface treated,
whether or not printed, of a kind used for the production of remote controls
an aluminium content of 99,98 % or more,
a thickness of 0,070 mm or more but not more than 0,125 mm,
with a cubic texture, of a kind used for high voltage etching
of purity by weight of more than 99,5 %, and
with a particle size of not more than 0,8 mm
with Ingress Protection (IP) standard of IP69,
with a rotor speed of not more than 6500 rpm when not loaded,
with a rated voltage of 12,0 V (± 0,1),
of a specified temperature range of – 40 °C or more but not more than + 165 °C,
with or without a connecting pinion,
with or without an engine connector,
with or without a flange,
with a diameter of not more than 40 mm (not including the flange),
with an overall height of not more than 90 mm (from the base to the pinion)
a specified speed of not more than 4100 rpm,
a minimum output of 400 W, but not more than 1,3 kW (at 12V),
a flange diameter of 85 mm or more but not more than 200 mm,
a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,
a housing length of not more than 265 mm, measured from the flange to the outer ending,
a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),
a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and
surface magnets,
whether or not with electronic power steering controller,
whether or not with pulley,
whether or not with rotor position sensor
a width of 120,0 mm or more but not more than 305,0 mm,
a thickness of 12,0 mm or more but not more than 67,0 mm,
a height of 72,0 mm or more but not more than 126,0 mm,
a nominal voltage of 3,6 V or more but not more than 3,75 V, and
a nominal capacity of 6,9 Ah or more not more than 265 Ah, for use in the manufacture of rechargeable electric vehicle batteries
a metal casing,
a length of 147,85 mm or more but not more than 173,15 mm,
a width of 17,4 mm or more but not more than 21,1 mm,
a height of 90,85 mm or more but not more than 95,15 mm,
a nominal voltage of 3,3 V or more but not more than 3,65 V, and
a nominal capacity of 17,5 Ah or more
a width of not more than 480 mm,
a height of not more than 400 mm,
a length of not more than 550 mm,
five or six gears,
a differential gear,
an engine torque of 400 Nm or less, for use in the manufacture of motor vehicles of Heading 8703
height of more than 10 mm but not more than 200 mm,
width of more than 10 mm but not more than 250 mm,
length of more than 10 mm but not more than 200 mm,
internal porosity not more than 1 mm,
outer porosity not more than 2 mm,
rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles
uncoated and unpainted,
of a length of 30 mm or more, but not more than 234,5 mm,
of a width of 7 mm or more, but not more than 28 mm, and
of a height of 0,5 mm or more, but not more than 3 mm, of a kind used in dental x-ray systems
a horizontal field of view range to a maximum of 120 deg,
a diagonal field of view range to a maximum of 105 deg,
a focal length to a maximum of 7,50 mm,
a relative aperture of a maximum of F/2,90,
a maximum diameter of 22 mm
(3) the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns: Serial number CN code TARIC Description Rate of autonomous duty Supplementary Unit Date foreseen for mandatory review 0.8144 ex27101225 20 Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with: 0 % - 31.12.2025 0.8076 ex29039980 45 1-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8101 ex29039980 55 1-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8042 ex29109000 40 [(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.8073 ex29121900 20 Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8147 29124200 Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) 0 % - 31.12.2025 0.8058 ex29142900 45 4-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8146 ex29159070 23 Tin bis(2-ethylhexanoate) (CAS RN 301-10-0) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.8057 ex29162000 45 Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8039 ex29163990 78 (2,5-dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of 98,0 % or more 0 % - 31.12.2025 0.8044 ex29181998 60 (R)-tert-butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8075 ex29183000 45 Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more 0 % - 31.12.2025 0.8066 ex29189990 48 2-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8045 ex29212900 15 (2S)-propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8067 ex29212900 25 N,N'-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more 0 % - 31.12.2025 0.8059 ex29214900 65 Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8027 ex29241900 28 (2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8030 ex29241900 33 (2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more 0 % - 31.12.2025 0.8041 ex29241900 38 Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8049 ex29241900 43 N6-(tert-butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8043 ex29242970 58 2-chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8060 ex29242970 78 5-amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8033 ex29252900 60 Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.8040 ex29252900 70 Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.8061 ex29280090 38 Aqueous solution of methoxyammonium chloride (CAS-RN 593-56-6), containing by weight: 0 % - 31.12.2025 0.8093 ex29280090 43 2-(3-methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.8036 ex29309098 11 Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8047 ex29309098 14 (E)-N'-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8050 ex29309098 19 4-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8069 ex29309098 28 Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste, with 0 % - 31.12.2025 0.8051 ex29319000 23 Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8063 ex29319000 28 Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more 0 % - 31.12.2025 0.8035 ex29329900 38 1-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8046 ex29331990 48 1-(3-iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8068 ex29333999 30 4-amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more 0 % - 31.12.2025 0.8072 ex29333999 75 Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more 0 % - 31.12.2025 0.8074 ex29333999 80 Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8096 ex29333999 89 1-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8037 ex29334990 55 2-(tert-butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8056 ex29335995 42 2-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8038 ex29337900 45 1-phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.8089 ex29339980 25 6-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8032 ex29339980 65 1,2,4-Triazole (CAS RN 288-88-0) with a purity by weight of 99 % or more 0 % - 31.12.2025 0.8053 ex29339980 69 5-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more 0 % - 31.12.2025 0.8054 ex29339980 76 2-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8064 ex29339980 77 9-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8094 ex29349990 40 2,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more 0 % - 31.12.2025 0.8031 ex29349990 55 Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8048 ex29349990 81 1-(4-aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more 0 % - 31.12.2025 0.8055 ex29359090 80 4-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more 0 % - 31.12.2025 0.8137 ex32089019 ex39119099 13 63 Mixture, containing by weight: 0 % - 31.12.2025 0.8083 ex38249992 92 Solution consisting of: 0 % - 31.12.2025 0.8121 ex38249992 93 Solution of not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), contains organic carbonate derivatives as additives 3.2 % - 31.12.2021 0.8062 ex38249993 51 Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more 0 % - 31.12.2025 0.8122 ex38249996 68 Lithium nickel dioxide (CAS RN 12325-84-7) containing by weight: 3.2 % - 31.12.2021 0.8125 ex39023000 20 Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene 0 % - 31.12.2025 0.8126 ex39059100 50 Aqueous solution consisting by weight of: 0 % - 31.12.2025 0.8145 ex39059100 60 Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight: 0 % - 31.12.2025 0.8138 ex39059100 70 Aqueous solution, containing by weight: 0 % - 31.12.2025 0.8139 ex39059100 80 Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0) 0 % - 31.12.2025 0.8097 ex39100000 75 Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder 0 % - 31.12.2025 0.8116 ex39173100 ex39173200 ex39173900 30 20 20 Tubings: 0 % - 31.12.2021 0.8117 ex39174000 20 Plastic fittings (kit of nuts and ferrules or nuts) and connectors: for tubings with: 0 % - 31.12.2021 0.8109 ex39191080 48 Plastic strips of polypropylene, 3.2 % - 31.12.2021 0.8149 ex39201089 45 Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels 0 % - 31.12.2022 0.8118 ex39269097 58 Plastic ferrules and/or plugs: for tubings with: 0 % - 31.12.2021 0.8108 ex54033100 10 Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments 0 % - 31.12.2025 0.8105 ex81089030 55 Wires of an alloy of titanium: 0 % - 31.12.2025 0.8148 ex84129080 20 Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with: 0 % p/st 31.12.2025 0.8079 ex84129080 30 Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with: 0 % p/st 31.12.2025 0.8111 ex84143020 20 Hermetic reciprocating refrigeration compressor, for isobutane: 0 % - 31.12.2025 0.8112 ex84143020 30 Hermetic reciprocating refrigeration compressor for isobutane as refrigerant: 0 % - 31.12.2025 0.8134 ex84143020 40 Hermetic reciprocating compressor, for isobutane as refrigerant with: 0 % - 31.12.2025 0.8135 ex84143020 50 Hermetic reciprocating compressor, for isobutane as refrigerant with: 0 % - 31.12.2025 0.8133 ex84148073 40 Hermetic heat pump compressor, for R134A or R450A as refrigerant: 0 % - 31.12.2025 0.8123 ex84798997 28 Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: 0 % - 31.12.2025 0.7962 ex84799070 50 Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft: 0 % - 31.12.2025 0.8098 ex84825000 20 Axial roller bearing made of steel: 0 % p/st 31.12.2025 0.8088 ex84829900 40 Inner and outer rings made of steel, not grinded, with an internal raceway, with diameters of: 0 % - 31.12.2025 0.8100 ex84835080 20 Pulley blocks of non-cast steel: 0 % p/st 31.12.2025 0.8130 ex85016200 40 AC, 3-phase generator, with: 0 % - 31.12.2025 0.8095 ex85059090 20 Electromagnetic clutch coil in a cylindrical metal housing: 0 % p/st 31.12.2025 0.8115 ex85076000 48 Integrated battery system in a metal case with holders, consisting of: 1.3 % - 31.12.2021 0.8140 ex85299092 73 CMOS-Image sensor 0 % - 31.12.2025 0.8085 ex85371091 45 Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with: 0 % - 31.12.2025 0.8132 ex85371098 80 Propulsion Control System with at least: 0 % p/st 31.12.2025 0.8124 ex85371098 88 Control panel for car radio and/or navigation control with: 0 % - 31.12.2025 0.8127 ex87089997 28 A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames: 0 % - 31.12.2025 0.8128 ex87089997 38 A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames: 0 % - 31.12.2025’
a specific gravity of 0,666 or more but not more than 0,686,
a total of carbonyl compounds of less than 1 ppm,
a total of acetylenic compounds of less than 2 ppm
30 % or more but not more than 40 % of methoxyammonium chloride
not more than 4 % of hydrochloric acid
a purity of 74 % or more but not more than 87 % by weight, and
a maximum water content of 23 % by weight
30 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),
10 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),
40 % or more, but not more than 55 % of ethanol (CAS RN 64-17-5),
1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)
50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and
50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8)
less than 5 % of lithium hydroxide (CAS RN 1310-65-2),
less than 5 % of lithium carbonate (CAS RN 554-13-2), and
less than 15 % of nickel oxide (CAS RN 11099-02-8)
10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3),
not more than 1 % preservatives
27 % or more but not more than 33 % of copolymer,
not more than 1,5 % of ethanol (CAS RN 64-17-5),
not more than 1 % of preservatives
25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2),
10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)
with an outer diameter of 0,33 mm or more but not more than 3,3 mm,
with an inner diameter of 0,01 mm or more but not more than 2,1 mm,
suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa,
suitable for all solutions used in chromatography,
whether or not with fused silica,
whether or not covered with PEEK, for use in chromatographic system
threaded,
supported with or without a stainless steel ring,
suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,
outer diameter of 0,33 mm or more but not more than 3,3 mm,
suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,
suitable for all solutions used in chromatography, for use in the production of chromatographic systems
self-adhesive,
unilaterally adhesive-coated with an Acrylic Polymer,
in rolls with a width of 20 cm or less,
with a thickness including adhesion layer of 0,03 mm or less, for use in the manufacturing of lithium-ion electric rechargeable batteries
supported with or without a stainless steel ring,
suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,
outer diameter of 0,33 mm or more but not more than 3,3 mm,
suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,
suitable for all solutions used in chromatography, for use in the production of chromatographic systems
with a niobium content by weight of 42 % or more but not more than 47 %,
with a diameter of not more than 6 mm,
complying with standard AMS 4982, for use in the production of aerospace fasteners
a length of 3,5 m or more but not more than 4,3 m,
a width of 2 m or more but not more than 3,5 m,
a height of 1 m or more but not more than 1,3 m,
a weight of 11 tons or more but not more than 20 tons,
mounting bores for yaw drive,
mounting flange for gearbox support,
drivetrain mount,
different screw sockets
a diameter of 2 m or more, but not more than 5 m,
a weight of 2 tons or more but not more than 7 tons
with a 3-phase permanent magnet brushless motor,
having left side suction connection and Power Factor Correction (PFC) inverter,
with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions
with a 3-phase permanent magnet brushless motor,
having left side suction connection and Power Factor Correction (PFC) inverter feasible to work from 1300 rpm up to 4500 rpm,
with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions
a Resistance Start Capacitor Run (RSCR) single phase motor,
a general coefficient of performance factor not lower than 1,93 at ASHRAE conditions,
a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions
a Resistance Start Capacitor Run (RSCR) single phase motor,
a general coefficient of performance factor not higher than 1,5 at ASHRAE conditions,
a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions
with the Single Phase Induction Motor PSC (Permanent Split Capacitor),
having bottom side suction connection and top side discharge connection,
8,1 cm3 or 8,2 cm3 displacement,
running at 3000 rpm,
with a cooling capacity of 920 W or higher, but not higher than 970 W in ASHRAE conditions
electronic brake assistants,
hydraulic unit driven by brushless electric motor,
brake fluid reservoir, for use in the manufacture of plug-in hybrid passenger cars
with 4 blades that end in grooves,
made of steel alloy with sintering process
the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,
the rollers are made of anti-friction steel according to ASTM 295-94,
with an external diameter of 63 mm or more but not more than 66 mm,
with an internal diameter of 44 mm or more but not more than 46 mm,
with a weight of 23 g or more but not more than 27 g,
with 36 rollers or more but not more than 38 rollers
14,66 mm or more but not more than 76,2 mm for the inner ring, and
26 mm or more but not more than 100 mm for the outer ring
made of structural carbon steel complying with standard JIS G4051,
with an external diameter of 114 mm or more but not more than 118 mm,
with an internal diameter of 33 mm or more but not more than 37 mm,
with a width of 29 mm or more but not more than 33 mm,
with a weight of 0,6 kg or more but not more than 0,9 kg,
with 6 trapezoidal grooves
a continuous power of 147 kVA or more but not more than 222 kVA,
a continuous torque of 650 Nm or more but not more than 900 Nm,
a maximum working speed of 2700 revolutions per minute (rpm),
a liquid cooled system,
a length of 100 mm or more but not more than 200 mm,
a width of 550 mm or more but not more than 650 mm,
a height of 550 mm or more but not more than 650 mm,
weighing of not more than 150 kg
the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,
the coil is made of copper wire,
with a weight of 0,4 kg or more but not more than 0,7 kg,
with a width of 22 mm or more but not more than 25 mm,
with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm,
with an external diameter of 88 mm or more but not more than 96 mm,
without plunger,
with one connector
a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh,
Battery Management System,
a power relay,
a cooling system,
four connectors, for use in the manufacture of Mild-hybrid (mHEV) motor vehicles
with a micro lens on every pixel (micro lens coverage at least 99 % of all pixel),
to capture infra-red light reflected from objects, in order to capture depth images in the cameras built for distance measurements (Time-of-Flight)
a programmable memory,
a microprocessor,
at least one composite connector,
a voltage of 24 V,
with a length of 350 mm or more but not more than 400 mm,
with a width of 200 mm or more but not more than 250 mm,
with a height of 80 mm or more but not more than 120 mm,
in a metal housing
a DC/AC inverter,
a power of 190 kW or more but not more than 220 kW,
a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system,
an integral control of all drive motor and generator traction system functions,
a CAN communications interface with System Control Unit,
a liquid cooled system,
a length of 300 mm or more but not more than 950 mm,
a width of 350 mm or more but not more than 600 mm,
a height of 200 mm or more but not more than 350 mm,
a weight of 40 kg or more but not more than 90 kg
electronic passive components,
at least two switches,
LEDs,
at least one connector,
whether or not warning triangle switch,
for a voltage not exceeding 16 V, for use in the manufacture of goods of Chapter 87
cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,
with an operating pressure of not less than 35 MPa,
with a durability declared by the manufacturer of not less than 20 years,
with a cylinder capacity of 180 liters or more but not more than 375 liters,
equipped with a set of solenoid, manual and safety PRD valves,
with a total width of 1800 mm or more but not more than 2300 mm,
with a total height of 400 mm or more but not more than 500 mm,
with a total length of 1200 mm or more but not more than 3600 mm
made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,
with an operating pressure of not less than 20 MPa,
with a shelf life declared by the manufacturer of not less than 20 years,
with a cylinder capacity of 315 liters or more but not more than 375 liters,
equipped with a set of solenoid, manual and safety PRD valves,
with a total width of 2200 mm or more but not more than 2300 mm,
with a total height of 450 mm or more but not more than 460 mm,
with a total length of 3500 mm or more but not more than 3600 mm