Gelex

Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013

In forceVersion 2021-12-20from 2021-12-23
Grade B

mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.

Ask Gelex about this law

Address https://gelex.eu/eli/EU/regulation/2021/2283@2021-12-20/en

Contents
  1. Preamble
    1. Article 1
    2. Article 2
    3. Article 3
    4. Article 4
    5. Article 5
  3. ANNEX
  4. ANNEX

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) The production of certain agricultural and industrial products in the Union is insufficient to meet the specific requirements of the user industries in the Union. Consequently, Union supplies of those products depend on imports from third countries. The most urgent Union requirements for the products concerned should be met immediately on the most favorable terms. Autonomous tariff quotas of the Union (quotas) at preferential quota duty rates should therefore be opened within the limits of appropriate quota volumes, taking account of the need not to disturb the markets for such products or impede the establishment or development of production in the Union.

(2) It is necessary to ensure equal and uninterrupted access to the quotas for all importers in the Union and to ensure the uninterrupted application of the quota duty rates laid down for those quotas to all imports of the products concerned into all Member States until the quotas have been exhausted.

(3) Commission Implementing Regulation (EU) 2015/2447 provides for a system of quota management which ensures equal and uninterrupted access to the quotas and uninterrupted application of the quota duty rates, and which follows the chronological order of the dates of acceptance of declarations of release for free circulation. The quotas opened by this Regulation should therefore be managed by the Commission and the Member States in accordance with that system.

(4) The quota volumes are mostly expressed in supplementary units of weight. For certain products for which a quota is opened, the quota volume is set out in another supplementary unit. Where no supplementary unit is specified for those products in the Combined Nomenclature laid down in Annex I to Council Regulation (EEC) No 2658/87 (the Combined Nomenclature), there can be uncertainty in respect of the supplementary unit used. For the sake of clarity and in the interests of better quota management, it is therefore necessary to provide that, in order to benefit from those quotas, the exact quantity of the products imported be entered in the declaration for release for free circulation using the supplementary unit of the quota volume set out for those products in this Regulation.

(5) It is necessary to clarify that any mixtures, preparations or products made up of different components containing products subject to quotas should be excluded from the scope of this Regulation, as only the products as described in this Regulation should be subject to the quotas.

(6) Council Regulation (EU) No 1388/2013 has been amended many times. In addition, as the coding of the Combined Nomenclature has been updated by Commission Implementing Regulation (EU) 2021/1832, a large number of changes to Regulation (EU) No 1388/2013 would be required. Therefore, in the interests of clarity and transparency, that Regulation should be replaced in its entirety.

(7) In accordance with the principle of proportionality, it is necessary and appropriate for the achievement of the basic objective of promoting trade between Member States and third countries to lay down rules in order to balance the different commercial interests of economic operators in the Union without changing the Union’s World Trade Organization schedule. This Regulation does not go beyond what is necessary in order to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union.

(8) In order to avoid any interruption of the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the quotas for the products listed in this Regulation should apply from 1 January 2022. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

1. For the agricultural and industrial products listed in the Annex, autonomous tariff quotas of the Union (quotas) shall be opened.

2. Within the quotas referred to in paragraph 1 of this Article, the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council are suspended for the quota periods, at the quota duty rates and up to the quota volumes indicated in the Annex to this Regulation.

3. Paragraphs 1 and 2 do not apply to any mixtures, preparations or products made up of different components containing products listed in the Annex.

Article 2

The quotas referred to in Article 1 of this Regulation shall be managed by the Commission in accordance with Articles 49 to 54 of Implementing Regulation (EU) 2015/2447.

Article 3

Where a customs declaration for release for free circulation is lodged for products for which supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in that declaration using the supplementary unit set out in the Annex.

Article 4

Regulation (EU) No 1388/2013 is repealed.

Article 5

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2022.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 20 December 2021. For the Council The President A. Vizjak

ANNEX

ANNEX

Order number CN code TARIC Description Quota period Quota volume Quota duty rate 09.2637 ex07104000 ex20058000 20 30 Corn cobs (Zea mays var. saccharata) whether or not cut, with a diameter of 10 mm or more, but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking 1.1.-31.12. 550 tonnes 0 % 09.2849 ex07108069 10 Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals 1.1.-31.12. 700 tonnes 0 % 09.2664 ex20086039 30 Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products 1.1.-31.12. 1000 tonnes 10 % 09.2740 ex23099031 87 Soya bean protein concentrate containing by weight: for use in the manufacture of animal feed products 1.1.-31.12. 30000 tonnes 0 % 09.2913 ex24011035 ex24011070 ex24011095 ex24011095 ex24011095 ex24012035 ex24012070 ex24012095 ex24012095 ex24012095 91 10 11 21 91 91 10 11 21 91 Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 24021000 1.1.-31.12. 6000 tonnes 0 % 09.2586 ex27101981 ex27101999 20 40 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: and with: 1.1.-30.6. 75000 tonnes 0 % 09.2828 27122090 Paraffin wax containing by weight less than 0,75 % of oil 1.1.-31.12. 100000 tonnes 0 % 09.2600 ex27129039 10 Slack wax (CAS RN 64742-61-6) 1.1.-31.12. 100000 tonnes 0 % 09.2578 ex28111980 50 Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8) 1.1.-31.12. 27000 tonnes 0 % 09.2928 ex28112200 40 Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide 1.1.-31.12. 1700 tonnes 0 % 09.2806 ex28259040 30 Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8) 1.1.-31.12. 12000 tonnes 0 % 09.2872 ex28332980 40 Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate 1.1.-31.12. 400 tonnes 0 % 09.2567 ex29032200 10 Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more 1.1.-31.12. 11885000 kilograms 0 % 09.2837 ex29037930 20 Bromochloromethane (CAS RN 74-97-5) 1.1.-31.12. 600 tonnes 0 % 09.2933 ex29039980 30 1,3-Dichlorobenzene (CAS RN 541-73-1) 1.1.-31.12. 2600 tonnes 0 % 09.2700 ex29051200 10 Propan-1-ol (propyl alcohol) (CAS RN 71-23-8) 1.1.-31.12. 15000 tonnes 0 % 09.2830 ex29061900 40 Cyclopropylmethanol (CAS RN 2516-33-8) 1.1.-31.12. 20 tonnes 0 % 09.2851 ex29071200 10 O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight 1.1.-31.12. 20000 tonnes 0 % 09.2704 ex29094980 20 2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9) 1.1.-31.12. 500 tonnes 0 % 09.2565 ex29141990 70 Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more 1.1.-31.12. 400 tonnes 0 % 09.2852 ex29142900 60 Cyclopropyl methyl ketone (CAS RN 765-43-5) 1.1.-31.12. 300 tonnes 0 % 09.2638 ex29152100 10 Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more 1.1.-31.12. 1000000 tonnes 0 % 09.2679 29153200 Vinyl acetate (CAS RN 108-05-4) 1.1.-31.12. 400000 tonnes 0 % 09.2728 ex29159070 85 Ethyl trifluoroacetate (CAS RN 383-63-1) 1.1.-31.12. 400 tonnes 0 % 09.2665 ex29161995 30 Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5) 1.1.-31.12. 8250 tonnes 0 % 09.2684 ex29163990 28 2,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5) 1.1.-31.12. 700 tonnes 0 % 09.2599 ex29171100 40 Diethyl oxalate (CAS RN 95-92-1) 1.1.-31.12. 500 tonnes 0 % 09.2769 ex29171390 10 Dimethyl sebacate (CAS RN 106-79-6) 1.1.-31.12. 1000 tonnes 0 % 09.2634 ex29171980 40 Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 % 1.1.-31.12. 8000 tonnes 0 % 09.2808 ex29182200 10 O-acetylsalicylic acid (CAS RN 50-78-2) 1.1.-31.12. 120 tonnes 0 % 09.2646 ex29182900 75 Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12. 380 tonnes 0 % 09.2647 ex29182900 80 Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) wita h: for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates) 1.1.-31.12. 140 tonnes 0 % 09.2975 ex29183000 10 Benzophenone-3,3',4,4'-tetracarboxylic dianhydride (CAS RN 2421-28-5) 1.1.-31.12. 1000 tonnes 0 % 09.2688 ex29202900 70 Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4) 1.1.-31.12. 6000 tonnes 0 % 09.2598 ex29211999 75 Octadecylamine (CAS RN 124-30-1) 1.1.-31.12. 400 tonnes 0 % 09.2649 ex29212900 60 Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5) 1.1.-31.12. 1700 tonnes 0 % 09.2682 ex29214100 10 Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more 1.1.-31.12. 150000 tonnes 0 % 09.2617 ex29214200 89 4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3) 1.1.-31.12. 500 tonnes 0 % 09.2602 ex29215119 10 o-phenylenediamine (CAS RN 95-54-5) 1.1.-31.12. 1800 tonnes 0 % 09.2563 ex29224100 20 L-Lysine hydrochloride (CAS RN 657-27-2) or an aqueous solution of L-lysine (CAS RN 56-87-1), containing by weight 50 % or more of L-lysine 1.1.-30.6. 122500 tonnes 0 % 09.2592 ex29225000 25 L-Threonine (CAS RN 72-19-5) 1.1.-31.12. 166000 tonnes 0 % 09.2575 ex29239000 87 3-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride 1.1.-31.12. 19000 tonnes 0 % 09.2854 ex29241900 85 3-iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6) 1.1.-31.12. 400 tonnes 0 % 09.2874 ex29242970 87 Paracetamol (INN) (CAS RN 103-90-2) 1.1.-31.12. 20000 tonnes 0 % 09.2742 ex29261000 10 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815 1.1.-31.12. 60000 tonnes 0 % 09.2583 ex29261000 20 Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921, 2924, 3906 and 4002 1.1.-31.12. 40000 tonnes 0 % 09.2856 ex29269070 84 2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9) 1.1.-31.12. 900 tonnes 0 % 09.2708 ex29280090 15 Monomethylhydrazine (CAS RN 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 (± 5) % 1.1.-31.12. 900 tonnes 0 % 09.2581 ex29291000 25 1,5-Naphthylene diisocyanate (CAS RN 3173-72-6) with a purity by weight of 90 % or more 1.1.-31.12. 300 tonnes 0 % 09.2685 ex29299000 30 Nitroguanidine (CAS RN 556-88-7) 1.1.-31.12. 6500 tonnes 0 % 09.2597 ex29309098 94 Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6) 1.1.-31.12. 6000 tonnes 0 % 09.2596 ex29309098 96 2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8) 1.1.-31.12. 300 tonnes 0 % 09.2580 ex29319000 75 Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene 1.1.-31.12. 165 tonnes 0 % 09.2842 29321200 2-Furaldehyde (furfuraldehyde) 1.1.-31.12. 10000 tonnes 0 % 09.2696 ex29322090 25 Decan-5-olide (CAS RN 705-86-2) 1.1.-31.12. 6000 kilograms 0 % 09.2697 ex29322090 30 Dodecan-5-olide (CAS RN 713-95-1) 1.1.-31.12. 6000 kilograms 0 % 09.2812 ex29322090 77 Hexan-6-olide (CAS RN 502-44-3) 1.1.-31.12. 4000 tonnes 0 % 09.2858 29329300 Piperonal (CAS RN 120-57-0) 1.1.-31.12. 220 tonnes 0 % 09.2673 ex29333999 43 2,2,6,6-Tetramethylpiperidin-4-ol (CAS RN 2403-88-5) 1.1.-31.12. 1000 tonnes 0 % 09.2880 ex29335995 39 Ibrutinib (INN) (CAS RN 936563-96-1) 1.1.-31.12. 5 tonnes 0 % 09.2860 ex29336980 30 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) 1.1.-31.12. 600 tonnes 0 % 09.2566 ex29339980 05 1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more 1.1.-31.12. 60 tonnes 0 % 09.2658 ex29339980 73 5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5) 1.1.-31.12. 400 tonnes 0 % 09.2593 ex29349990 67 5-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6) 1.1.-31.12. 45000 kilograms 0 % 09.2675 ex29359090 79 4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8) 1.1.-31.12. 1000 tonnes 0 % 09.2710 ex29359090 91 2,4,4-trimethylpentan-2-aminium (3R,5S,6E)-7-{2-[(ethylsulfonyl)amino]- 4-(4-fluorophenyl)-6-(propan-2-yl)pyrimidin-5-yl}-3,5-dihydroxyhept-6- enoate (CAS RN 917805-85-7) 1.1.-31.12. 5000 kilograms 0 % 09.2945 ex29400000 20 D-Xylose (CAS RN 58-86-6) 1.1.-31.12. 400 tonnes 0 % 09.2686 ex32041100 75 Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight 1.1.-31.12. 250 tonnes 0 % 09.2676 ex32041700 14 Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight 1.1.-31.12. 50 tonnes 0 % 09.2698 ex32041700 30 Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight 1.1.-31.12. 150 tonnes 0 % 09.2659 ex38029000 19 Soda flux calcinated diatomaceous earth 1.1.-31.12. 35000 tonnes 0 % 09.2908 ex38040000 10 Sodium lignosulphonate (CAS RN 8061-51-6) 1.1.-31.12. 40000 tonnes 0 % 09.2889 38051090 Sulphate turpentine 1.1.-31.12. 25000 tonnes 0 % 09.2935 ex38061000 10 Rosin and resin acids obtained from fresh oleoresins 1.1.-31.12. 280000 tonnes 0 % 09.2832 ex38089290 40 Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion 1.1.-31.12. 500 tonnes 0 % 09.2876 ex38112900 55 Additives consisting of reaction products of diphenylamine and branched nonenes containing by weight: used for the manufacture of lubricating oils 1.1.-31.12. 900 tonnes 0 % 09.2814 ex38159090 76 Catalyst consisting of titanium dioxide and tungsten trioxide 1.1.-31.12. 3000 tonnes 0 % 09.2644 ex38249992 77 Preparation containing by weight: 1.1.-31.12. 10000 tonnes 0 % 09.2681 ex38249992 85 Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6) 1.1.-31.12. 9000 tonnes 0 % 09.2650 ex38249992 87 Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 % 1.1.-31.12. 2000 tonnes 0 % 09.2888 ex38249992 89 Mixture of tertiary alkyldimethyl amines containing by weight: 1.1.-30.6. 10000 tonnes 0 % 09.2829 ex38249993 43 Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics: 1.1.-31.12. 1600 tonnes 0 % 09.2907 ex38249993 67 Mixture of phytosterols, in the form of powder, containing by weight: for use in the manufacture of stanols/sterols or stanol/sterol esters 1.1.-31.12. 2500 tonnes 0 % 09.2568 ex38249996 91 Mixture, in pellet form, containing by weight: of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method) 1.1.-31.12. 1500 tonnes 0 % 09.2820 ex38279000 10 Mixtures containing by weight: 1.1.-31.12. 6000 tonnes 0 % 09.2671 ex39059990 81 Poly(vinyl butyral)(CAS RN 63148-65-2): 1.1.-31.12. 12500 tonnes 0 % 09.2846 ex39074000 25 Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2) 1.1.-31.12. 2000 tonnes 0 % 09.2585 ex39079980 70 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol 1.1.-31.12. 60000 tonnes 2 % 09.2723 ex39119019 10 Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4'-biphenylene) 1.1.-31.12. 5000 tonnes 0 % 09.2816 ex39121100 20 Cellulose acetate flakes 1.1.-31.12. 75000 tonnes 0 % 09.2573 ex39131000 20 Sodium alginate extracted from brown seaweed, with 1.1.-31.12. 2000 tonnes 0 % 09.2641 ex39139000 87 Sodium hyaluronate, non sterile, with: 1.1.-31.12. 300 kilograms 0 % 09.2661 ex39205100 50 Sheets of polymethylmethacrylate conforming to standards: 1.1.-31.12. 100 tonnes 0 % 09.2645 ex39211400 20 Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm) 1.1.-31.12. 1700 tonnes 0 % 09.2572 ex52052600 ex52052700 10 10 Raw white single cotton yarn 1.1.-31.12. 50000 tonnes 0 % 09.2576 ex52081216 20 Unbleached woven fabric in plain weave, with: where from the inside out, the 15 mm (± 2mm) wide tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave 1.1.-31.12. 1500000 square meters 0 % 09.2577 ex52081296 20 Unbleached woven fabric in plain weave, with: where from the inside out, the 15mm (± 2mm wide) tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave 1.1.-31.12. 2300000 square meters 0 % 09.2848 ex55051010 10 Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66) 1.1.-31.12. 10000 tonnes 0 % 09.2721 ex59069990 20 Woven and laminated rubberised textile fabric with the following characteristics: used for the manufacture of the retractable roof of motor vehicles 1.1.-31.12. 375000 square meters 0 % 09.2866 ex70191200 ex70191200 06 26 S glass stratifils (rovings): for use in the manufacture of aeronautics 1.1.-31.12. 1000 tonnes 0 % 09.2628 ex70196600 10 Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames 1.1.-31.12. 3000000 square meters 0 % 09.2799 ex72024990 10 Ferro-chromium containing 1,5 % or more but not more than 4 % by weight of carbon and not more than 70 % of chromium 1.1.-31.12. 50000 tonnes 0 % 09.2652 ex74091100 ex74101100 30 40 Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more 1.1.-31.12. 1020 tonnes 0 % 09.2734 ex74091900 20 Plates or sheets consisting of: 1.1.-31.12. 7000000 pieces 0 % 09.2662 ex74102100 55 Plates: 1.1.-31.12. 80000 square meters 0 % 09.2835 ex76042910 30 Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm 1.1.-31.12. 1000 tonnes 0 % 09.2736 ex76071190 ex76071190 ex76071190 ex76071190 75 77 78 79 Aluminium and magnesium alloy strip or foil: for use in the manufacture of slats for blinds 1.1.-31.12. 600 tonnes 0 % 09.2722 81041100 Unwrought magnesium, containing at least 99,8 % by weight of magnesium 1.1.-31.12. 120000 tonnes 0 % 09.2840 ex81043000 20 Magnesium powder: 1.1.-31.12. 2000 tonnes 0 % 09.2629 ex83024900 91 Aluminium telescopic handle for use in the manufacture of luggage 1.1.-31.12. 1500000 pieces 0 % 09.2720 ex84139100 50 Pump head for two cylinder high pressure pump made of forged steel, with: of a kind used in diesel injection systems 1.1.-31.12. 65000 pieces 0 % 09.2569 ex84149000 80 Turbocharger wheel housing of cast aluminium alloy or cast iron: for use in the automotive industry 1.1.-31.12. 4000000 pieces 0 % 09.2570 ex84829190 10 Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, for use in wind turbine industry 1.1.-31.12. 600000 pieces 0 % 09.2738 ex84829900 30 Brass cages with the following characteristics: of a kind used for the manufacture of ball bearings 1.1.-31.12. 50000 pieces 0 % 09.2763 ex85014020 ex85014080 40 30 Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30000 rpm but not more than 50000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners 1.1.-31.12. 2000000 pieces 0 % 09.2672 ex85299092 ex94054231 75 70 Printed circuit board with LED diodes: for the manufacture of backlight units for goods of heading 8528 1.1.-31.12. 115000000 pieces 0 % 09.2574 ex85371091 73 Multifunctional device (instrument cluster) with: for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 870380 1.1.-31.12. 66900 pieces 0 % 09.2003 ex85437090 63 Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm x 30 mm 1.1.-31.12. 1400000 pieces 0 % 09.2910 ex87089997 75 Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87 1.1.-31.12. 200000 pieces 0 % 09.2694 ex87141090 30 Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes 1.1.-31.12. 1000000 pieces 0 % 09.2668 ex87149110 ex87149110 ex87149110 21 31 75 Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles) 1.1.-31.12. 600000 pieces 0 % 09.2564 ex87149110 ex87149110 ex87149110 25 35 77 Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles) 1.1.-31.12. 9600000 pieces 0 % 09.2579 ex90292031 ex90299000 40 40 Clustered instrument panel with: for use in the manufacture of goods of Chapter 87 1.1.-31.12. 160000 pieces 0 %

60 % (± 10 %) of crude protein,

5 % (± 3 %) of crude fibre,

5 % (± 3 %) of crude ash, and

3 % or more but not more than 6,9 % of starch,

90 % or more by weight of saturates, and

not more than 0,03 % by weight of sulphur,

a viscosity index of 80 or more, but less than 120, and

a kinematic viscosity of 5,0 cSt at 100 °C or more, but not more than 13,0 cSt at 100 °C

a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and

a melting point of 49 °C or more, but not more than 54 °C,

a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and

a melting point of 110 °C or more, but not more than 125 °C,

28 % or more, but not more than 55 % of 4-monononyldiphenylamine,

45 % or more but not more than 65 % of 4,4'-dinonyldiphenylamine, and

not more than 5 % of 2, 4-dinonyldiphenylamine and 2, 4'-dinonyldiphenylamine,

55 % or more but not more than 78 % of dimethyl gluterate (CAS RN 1119-40-0),

10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and

not more than 35 % of dimethyl succinate (CAS RN 106-65-0)

60 % or more but not more than 80 % of dodecyldimethylamine (CAS RN 112-18-5), and

20 % or more but not more than 30 % of dimethyl(tetradecyl)amine (CAS RN 112-75-4)

a resin acid content not exceeding 30 % by weight,

an acid number not exceeding 110, and

a melting point of 100 °C or more

75 % or more of sterols,

not more than 25 % of stanols,

49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and

50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4),

60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),

8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),

5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),

not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and

not more than 1 % of ethyl chloride (CAS RN 75-00-3)

containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and

with a median particle size (D50) of more than 0,6 mm

a loss on drying of not more than 15 % by weight (4h at 105 °C),

a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight

a weight average molecular weight (Mw) of not more than 900000,

an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,

an ethanol content of not more than 1 % by weight,

an isopropanol content of not more than 0,5 % by weight

EN 4364 (MIL-P-5425E) and DTD5592A, or

EN 4365 (MIL-P-8184) and DTD5592A

of combed fibres,

with an average fibre length of 36,5 mm or more,

produced through the compact ring spinning process with pneumatic compression,

with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5000 mm/min)

a width of not more than 145 cm,

a weight of 120 g/m2 or more, but not more than 130 g/m2,

30 or more, but not more than 45 wefts per cm,

a tuck-in selvedge on both sides,

a width of not more than 145 cm,

a weight of more than 130 g/m2, but not more than 145 g/m2

30 or more, but not more than 45 wefts per cm,

a tuck-in selvedge on both sides,

with three layers,

one outer layer consists of acrylic fabric,

the other outer layer consists of polyester fabric,

the middle layer consists of chlorobutyl rubber,

the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2,

the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, and

the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm,

composed of continuous glass filaments of 9 μm (± 0,5 μm),

measuring 200 tex or more but not more than 680 tex,

not containing any calcium oxide, and

with a breaking strength of more than 3550 MPa determined by ASTM D2343-09,

a layer of a silicon nitride ceramic with a thickness of 0,32 mm (± 0,1 mm) or more but not more than 1,0 mm (± 0,1 mm),

covered on both sides with a foil of refined copper with a thickness of 0,8 mm (± 0,1 mm), and

on one side partially covered with a coating of silver

consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,

with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

with a comparative tracking index (CTI) of 600 or more

of an alloy conforming to standards 5182-H19 or 5052-H19,

in rolls with an outside diameter of minimum 1250 mm but not more than 1350 mm,

of a thickness (tolerance – 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,

of a width (tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,

having a camber tolerance of not more than 0,4 mm/750 mm,

of a flatness measurement: I-unit ± 4,

having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and

of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,

of purity by weight of 98 % or more, but not more than 99,5 %, and

with a particle size of 0,2 mm or more but not more than 0,8 mm

milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and

drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm,

with a heat resistance up to 400 °C,

with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,

made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290),

with a deviation of 0,5 mm or less as determined with the FBH method

continuously or centrifugally cast,

turned,

containing by weight 35 % or more, but not more than 38 % of zinc,

containing by weight 0,75 % or more, but not more than 1,25 % of lead,

containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and

with a tensile strength of 415 Pa or more,

whether or not equipped with prisms/lens, and

whether or not fitted with connector(s)

curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces,

microprocessors and memory chips,

acoustic module and loudspeaker,

connections for CAN, 3 x LIN bus, LVDS and Ethernet,

for operating various functions (e.g. chassis, lighting) and

for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery),

stepping motors,

analog pointers and dials,

or without microprocessor control board,

or without LED indicators or LCD display,

showing at least:

speed,

engine revolutions,

engine temperature,

the fuel level,

communicating via CAN-BUS and/or K-LINE protocols,

Versions

  1. 2021-12-20

Cited by