Gelex

Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

In forceVersion 2014-06-24from 2014-01-01
Grade B

mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.

Ask Gelex about this law

Address https://gelex.eu/eli/EU/regulation/2014/722@2014-06-24/en

Contents
  1. Preamble
    1. Article 1
    2. Article 2
    3. Article 3
  3. ANNEX
  4. ANNEX I TARIFF SUSPENSIONS REFERRED TO IN POINT (2) OF ARTICLE 1
  5. ANNEX II TARIFF SUSPENSIONS REFERRED TO IN POINT (3) OF ARTICLE 1
  6. ANNEX III SUPPLEMENTARY UNITS REFERRED TO IN POINT (1) OF ARTICLE 2
  7. ANNEX IV SUPPLEMENTARY UNITS REFERRED TO IN POINT (2) OF ARTICLE 2

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) It is in the interest of the Union to suspend totally the autonomous Common Customs Tariff duties on 100 products which are currently not listed in Annex I to Council Regulation (EU) No 1387/2013. Those products should, therefore, be inserted into that Annex.

(2) It is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties on seven of the products that are currently listed in Annex I to Regulation (EU) No 1387/2013. Those products should, therefore, be deleted from that Annex.

(3) It is necessary to modify the product descriptions of 76 suspensions included in Annex I to Regulation (EU) No 1387/2013 in order to take account of technical product developments, economic trends on the market or to carry out linguistic adaptations. Moreover, TARIC codes for four additional products should be amended. In addition, for three additional products, multiple classification is necessary. The suspensions in respect of which modifications are necessary should be deleted from the list of suspensions in Annex I to Regulation (EU) No 1387/2013, and the modified suspensions should be reinserted into that list.

(4) For four products it is necessary, in the interest of the Union, to amend the date for their mandatory review in order to allow duty free imports beyond that date. Those products have been reviewed and have been given revised dates for their next mandatory review. Therefore, they should be deleted from the list of suspensions in Annex I to Regulation (EU) No 1387/2013 and, after the necessary modifications, be reintroduced into that list.

(5) It is necessary to re-group four products falling under four different product descriptions. Those four products should now fall under two product descriptions. Furthermore, the current double classification of the four suspensions relating to those four products has become superfluous and should therefore be amended. Those suspensions should therefore be deleted from the list of suspensions in Annex I to Regulation (EU) No 1387/2013, and the modified suspensions should be reinserted into that list.

(6) With a view to adequately ensuring the benefit of the suspension with regard to the competitive capacity of the enterprises concerned by products with TARIC code 4408393010, the suspension relating to those products should apply from 1 January 2014.

(7) In the interest of clarity, the modified entries should be marked with an asterisk.

(8) Annex II to Regulation (EU) No 1387/2013 should be completed with supplementary units for some of the new products for which suspensions are granted, in order to allow an appropriate statistical monitoring. For reasons of consistency, the supplementary units assigned to the products deleted from Annex I to Regulation (EU) No 1387/2013 should also be deleted from Annex II to that Regulation.

(9) Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(10) Since the amendments pursuant to this Regulation must take effect from 1 July 2014, this Regulation should apply from that date and enter into force on the day of its publication in the Official Journal of the European Union,

HAS ADOPTED THIS REGULATION:

Article 1

The table in Annex I to Regulation (EU) No 1387/2013 is amended as follows:

(1)(*) between the title and the table, the following note is inserted: Suspension relating to a product in this Annex with regard to which the CN or TARIC code or the product description or the mandatory review date has been amended by Council Regulation (EU) No 722/2014 of 24 June 2014 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products (OJ L 192, 1.7.2014, p. 9);

(2) the rows for the products listed in Annex I to this Regulation are inserted following the order of the CN codes indicated in the first column of the table in Annex I to Regulation (EU) No 1387/2013;

(3) the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2

Annex II to Regulation (EU) No 1387/2013 is amended as follows:

(1) the rows for the supplementary units for which the CN and TARIC codes are set out in Annex III to this Regulation are added;

(2) the rows for the supplementary units for which the CN and TARIC codes are set out in Annex IV to this Regulation are deleted.

Article 3

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 July 2014. However, for products with TARIC code 4408393010, it shall apply from 1 January 2014.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 24 June 2014. For the Council The President E. Venizelos

ANNEX

ANNEX I TARIFF SUSPENSIONS REFERRED TO IN POINT (2) OF ARTICLE 1

CN code TARIC Description Rate of autonomous duty Date foreseen for mandatory review *ex15119019 *ex15119091 *ex15131110 *ex15131930 *ex15132110 *ex15132930 10 10 10 10 10 10 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: 0 % 31.12.2014 ex19019099 ex21069098 39 45 Preparation in powder form containing by weight: 0 % 31.12.2018 ex21061020 20 Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form 0 % 31.12.2018 ex22072000 ex22072000 ex38200000 20 80 20 Feedstock consisting of by weight: for use in the manufacture of screenwash concentrate and other de-icing preparations 0 % 31.12.2018 ex27079999 10 Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27 0 % 31.12.2018 ex27101999 10 Catalytically hydroisomerized and dewaxed base oil comprising hydrogenated, highly isoparaffinic hydrocarbons, containing: with a viscosity index of 120 or more. 0 % 31.12.2018 *ex28230000 10 Titanium dioxide (CAS RN 13463-67-7): 0 % 31.12.2017 ex28273985 40 Barium chloride dihydrate (CAS RN 10326-27-9) 0 % 31.12.2018 ex28351000 20 Sodium hypophosphite (CAS RN 7681-53-0) 0 % 31.12.2018 *ex28369917 20 Zirconium (IV) basic carbonate (CAS RN 57219-64-4) 0 % 31.12.2018 ex28417000 10 Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8) 0 % 31.12.2018 ex29033919 10 1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0 % and containing not more than: 0 % 31.12.2018 ex29033990 85 (Perfluorobutyl) ethylene (CAS RN 19430-93-4) 0 % 31.12.2018 ex29033990 87 1H-Perfluorohexane (CAS RN 355-37-3) 0 % 31.12.2018 ex29051100 10 Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more 0 % 31.12.2018 *ex29051900 11 Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN 0 % 31.12.2018 ex29051900 20 Butyltitanate monohydrate, homopolymer (CAS RN 162303-51-7) 0 % 31.12.2018 ex29051900 25 Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6) 0 % 31.12.2018 *ex29081900 10 Pentafluorophenol (CAS RN 771-61-9) 0 % 31.12.2018 ex29109000 20 2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4) 0 % 31.12.2018 ex29122900 70 4-tert-Butylbenzaldehyde (CAS RN 939-97-9) 0 % 31.12.2018 ex29122900 80 4-Isopropylbenzaldehyde (CAS RN 122-03-2) 0 % 31.12.2018 ex29145000 55 2,2',4,4'-Tetrahydroxybenzophenone (CAS RN 131-55-5) 0 % 31.12.2018 ex29147000 80 Tetrachloro-p-benzoquinone (CAS RN 118-75-2) 0 % 31.12.2018 ex29153900 25 2-Methylcyclohexyl acetate (CAS RN 5726-19-2) 0 % 31.12.2018 ex29161400 20 Ethyl methacrylate (CAS RN 97-63-2) 0 % 31.12.2018 ex29163990 48 3-Fluorobenzoyl chloride (CAS RN 1711-07-5) 0 % 31.12.2018 ex29171990 15 Dimethyl but-2-ynedioate (CAS RN 762-42-5) 0 % 31.12.2018 ex29171990 25 n-Dodecenyl succinic anhydride (CAS RN 19780-11-1) 0 % 31.12.2018 ex29173995 40 Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5) 0 % 31.12.2018 ex29189990 25 Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0) 0 % 31.12.2018 ex29199000 60 Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) 0 % 31.12.2018 ex29214200 30 4-Nitroaniline (CAS RN 100-01-6) 0 % 31.12.2018 *ex29214200 86 2,5-Dichloroaniline (CAS RN 95-82-9) 0 % 31.12.2017 ex29214900 50 3,4-Xylidine (CAS RN 95-64-7) 0 % 31.12.2018 ex29224985 80 12-Aminododecanoic acid (CAS RN 693-57-2) 0 % 31.12.2018 ex29242998 37 Beflubutamid (ISO) (CAS RN 113614-08-7) 0 % 31.12.2018 ex29242998 43 N,N'-(3,3'-Dimethylbiphenyl-4,4'-ylene)di(acetoacetamide) (CAS RN 91-96-3) 0 % 31.12.2018 *ex29252900 20 N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8) 0 % 31.12.2018 ex29269095 23 Acrinathrin (ISO) (CAS RN 101007-06-1) 0 % 31.12.2018 ex29269095 27 Cyhalofop-butyl (ISO) (CAS RN 122008-85-9) 0 % 31.12.2018 ex29270000 60 4,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0) 0 % 31.12.2018 ex29309099 37 Ethanethioamide (CAS RN 62-55-5) 0 % 31.12.2018 ex29309099 43 Trimethylsulfoxonium iodide (CAS RN 1774-47-6) 0 % 31.12.2018 ex29319090 33 Di-tert-butylphosphane (CAS RN 819-19-2) 0 % 31.12.2018 ex29322090 45 2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1) 0 % 31.12.2018 ex29329900 53 1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3) 0 % 31.12.2018 *ex29329900 80 1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0) 0 % 31.12.2016 *ex29332100 50 1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)/(CAS RN 32718-18-6) 0 % 31.12.2016 ex29333999 58 4-Chloro-1-methylpiperidine (CAS RN 5570-77-4) 0 % 31.12.2018 ex29334990 80 Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1) 0 % 31.12.2018 ex29335995 13 2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9) 0 % 31.12.2018 *ex29335995 15 Sitagliptin phosphate monohydrate (CAS RN 654671-77-9) 0 % 31.12.2018 ex29336980 65 1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6) 0 % 31.12.2018 ex29339980 14 2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6) 0 % 31.12.2018 *ex29350090 17 6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1) 0 % 31.12.2018 *ex29350090 88 N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3) 0 % 31.12.2018 ex32041100 15 Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight 0 % 31.12.2018 *ex32041100 20 Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight 0 % 31.12.2015 *ex32041100 40 Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight 0 % 31.12.2016 *ex32041100 50 Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight 0 % 31.12.2016 *ex32041100 60 Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight 0 % 31.12.2016 *ex32041100 70 Colourant C.I. Disperse Red 343 (CAS RN 99035-78-6) and preparations based thereon with a colourant C.I. Disperse Red 343 content of 95 % or more by weight 0 % 31.12.2017 *ex32041200 10 Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight 0 % 31.12.2016 ex32041200 50 Colourant C.I. Acid Blue 80 (CAS RN 4474-24-2) and preparations based thereon with a colourant C.I. Acid Blue 80 content of 99 % or more by weight 0 % 31.12.2018 *ex32041300 10 Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight 0 % 31.12.2016 *ex32041300 30 Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight 0 % 31.12.2017 *ex32041300 40 Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight 0 % 31.12.2017 *ex32041500 10 Colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) (CAS RN 4424-06-0) and preparations based thereon with a colourant C.I. Vat Orange 7 (C.I.Pigment Orange 43) content of 20 % or more by weight 0 % 31.12.2017 *ex32041500 60 Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight 0 % 31.12.2018 ex32041500 70 Colourant C.I. Vat Red 1 (CAS RN 2379-74-0) 0 % 31.12.2018 *ex32041700 10 Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight 0 % 31.12.2018 ex32041700 13 Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) 0 % 31.12.2018 *ex32041700 15 Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight 0 % 31.12.2016 *ex32041700 20 Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight 0 % 31.12.2016 *ex32041700 25 Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight 0 % 31.12.2016 *ex32041700 30 Colourant C.I. Pigment Yellow 97 (CAS RN 12225-18-2) and preparations based thereon with a colourant C.I. Pigment Yellow 97 content of 30 % or more by weight 0 % 31.12.2017 *ex32041700 35 Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight 0 % 31.12.2016 *ex32041700 40 Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight 0 % 31.12.2014 *ex32041700 50 Colourant C.I. Pigment Yellow 180 (CAS RN 77804-81-0) and preparations based thereon with a colourant C.I. Pigment Yellow 180 content of 90 % or more by weight 0 % 31.12.2014 *ex32041700 60 Colourant C.I. Pigment Red 53:1 (CAS RN 5160-02-1) and preparations based thereon with a colourant C.I. Pigment Red 53:1 content of 50 % or more by weight 0 % 31.12.2016 *ex32041700 65 Colourant C.I. Pigment Red 53 (CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53 content of 50 % or more by weight 0 % 31.12.2016 *ex32041700 70 Colourant C.I. Pigment Yellow 13 (CAS RN 5102-83-0 or CAS RN 15541-56-7) and preparations based thereon with a colourant C.I. Pigment Yellow 13 content of 60 % or more by weight 0 % 31.12.2016 *ex32041700 75 Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight 0 % 31.12.2017 *ex32041700 80 Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight 0 % 31.12.2017 *ex32041700 85 Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight 0 % 31.12.2017 *ex32041700 88 Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight 0 % 31.12.2017 *ex32041900 70 Colourant C.I. Solvent Red 49:2 (CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2 content of 90 % or more by weight 0 % 31.12.2018 *ex32041900 71 Colourant C.I. Solvent Brown 53 (CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53 content of 95 % or more by weight 0 % 31.12.2015 *ex32041900 73 Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight 0 % 31.12.2015 *ex32041900 77 Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight 0 % 31.12.2016 *ex32041900 84 Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight 0 % 31.12.2017 *ex32041900 85 Colourant C.I. Solvent Red HPR (CAS RN 75198-96-8) and preparations based thereon with a colourant C.I. Solvent Red HPR content of 95 % or more by weight 0 % 31.12.2017 *ex32042000 20 Colourant C.I. Fluorescent Brightener 71 (CAS RN 16090-02-1) and preparations based thereon with a colourant C.I. Fluorescent Brightener 71 content of 94 % or more by weight 0 % 31.12.2016 *ex32042000 30 Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight 0 % 31.12.2016 ex32064970 10 Non aqueous dispersion, containing by weight: 0 % 31.12.2018 *ex32089019 15 Chlorinated polyolefins, in a solution 0 % 31.12.2018 ex32089019 ex38249097 45 61 Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate 0 % 31.12.2018 *ex37019900 10 Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541 or 8542 0 % 31.12.2018 *ex37071000 40 Sensitising emulsion, containing: dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate 0 % 31.12.2016 *ex38089190 30 Preparation containing endospores or spores and protein crystals derived from either: 0 % 31.12.2014 ex38112100 13 Additives containing: having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112100 15 Additives, consisting of: for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112100 17 Additives containing: for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112100 25 Additives containing: for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112100 27 Additives containing: for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112100 33 Additives containing: having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils 0 % 31.12.2018 ex38112100 35 Additives containing: for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112100 37 Additives containing: for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112100 43 Additives containing: having a total base number (TBN) greater than 40, for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112100 45 Additives containing: whether or not containing a methacrylic pour point depressant polymer, for use in the manufacture of lubricating oils 0 % 31.12.2018 *ex38112900 20 Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils 0 % 31.12.2017 *ex38112900 40 Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils 0 % 31.12.2017 ex38112900 60 Additives containing: for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112900 70 Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112900 80 Additives containing: for use in the manufacture of lubricating oils 0 % 31.12.2018 ex38112900 85 Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils 0 % 31.12.2018 *ex38231930 *ex38231930 20 30 Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of: 0 % 31.12.2018 *ex38231990 *ex38231990 20 30 Palm acid oils from refining for use in the manufacture of: 0 % 31.12.2018 *ex38249097 18 Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8) 0 % 31.12.2014 ex38249097 25 Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene 0 % 31.12.2018 *ex38249097 33 Preparation, containing: 0 % 31.12.2016 *ex38249097 34 Zinc Dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder 0 % 31.12.2018 ex38249097 46 Additives for paints and coatings, containing: 0 % 31.12.2018 ex38249097 57 Carrier in powder form, consisting of: to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers 0 % 31.12.2018 ex38249097 63 Catalyst containing by weight of 0 % 31.12.2018 ex38249097 80 Preparation consisting of: 0 % 31.12.2018 ex38249097 81 N-(2-phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7) 0 % 31.12.2018 ex38249097 83 C6-24 and C16-18-unsaturated fatty acid esters with sucrose (sucrose polysoyate) (CAS RN 93571-82-5) 0 % 31.12.2018 ex38249097 ex39069090 85 87 Aqueous solution of polymers and ammonia consisting of: 0 % 31.12.2018 ex39011010 10 Linear low-density polyethylene/LLDPE (CAS RN 9002-88-4) in the form of powder, with 0 % 31.12.2018 ex39019090 30 Linear low-density polyethylene/LLDPE (CAS RN 9002-88-4) in the form of powder, with 0 % 31.12.2018 ex39019090 40 Copolymer of ethylene and 1-hexene only (CAS RN 25213-02-9): 0 % 31.12.2018 *ex39029090 94 Chlorinated polyolefins, whether or not in a solution or dispersion 0 % 31.12.2018 *ex39073000 60 Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5) 0 % 31.12.2017 *ex39074000 30 Polycarbonate pellets or granules with a specific gravity of 1,18 or more but not more than 1,25, containing by weight: whether or not containing 1 % or more but not more than 5 % of flame retardant 0 % 31.12.2016 ex39076080 60 Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups 0 % 31.12.2018 *ex39100000 40 Silicones of a kind used in the manufacture of long term surgical implants 0 % 31.12.2016 *ex39139000 85 Sterile sodium hyaluronate (CAS RN 9067-32-7) 0 % 31.12.2018 ex39199000 67 Self-adhesive plastic film consisting of: 0 % 31.12.2018 ex39219010 30 Multilayer film consisting of: 0 % 31.12.2018 *ex39219055 *ex70194000 *ex70194000 25 21 29 Prepreg sheets or rolls containing polyimide resin 0 % 31.12.2014 ex39269097 50 Knob of car radio front panel, made of Bisphenol A-based polycarbonate 0 % 31.12.2018 ex44083930 10 Okoumé veneer sheets of a thickness not exceeding 6 mm, unsanded, unplaned, of a kind used in plywood manufacture 0 % 31.12.2018 *ex56031290 *ex56031390 60 60 Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method) 0 % 31.12.2018 ex56039390 60 Nonwovens made of polyester fibres, suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters 0 % 31.12.2018 ex69091900 25 Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide 0 % 31.12.2018 *ex69091900 80 Ceramic heat sinks, containing by weight: for maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521 or 8528 0 % 31.12.2016 *ex70194000 *ex70194000 11 19 Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of: 0 % 31.12.2018 *ex70200010 *ex76169990 10 77 Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body 0 % 31.12.2016 ex76082089 30 Seamless aluminium alloyed extruded tubes with: 0 % 31.12.2018 *ex83099090 10 Aluminium can ends: 0 % 31.12.2018 ex84143081 ex84148073 60 30 Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants: of a kind used in the production of household heat pump laundry tumble dryers 0 % 31.12.2018 ex84312000 40 Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427 0 % 31.12.2018 ex84752900 ex85141080 10 10 Glass Filament Melter with heater basket/bushing assembly: 0 % 31.12.2018 ex85011099 70 DC stepping motor, with 0 % 31.12.2018 *ex85011099 80 DC stepping motor, with: 0 % 31.12.2018 ex85030099 50 Stator for brushless motor, with: of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums 0 % 31.12.2018 ex85044090 70 Module for converting alternating current into direct current and direct current into direct current with 0 % 31.12.2018 *ex85051100 70 Disc consisting of an alloy of neodymium, iron and boron, covered with nickel, that after magnetisation is intended to become permanent magnet of a kind used in car loudspeakers 0 % 31.12.2018 ex85071020 85 Lead-acid accumulators or -modules, of a kind used for starting piston engines with for use in the manufacture of articles of CN-code 8711 0 % 31.12.2018 *ex85073020 30 Cylindrical nickel-cadmium accumulator or module, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1mm), having a nominal capacity of 1000 mAh or more, for use in the manufacture of rechargeable batteries 0 % 31.12.2018 *ex85075000 *ex85076000 20 20 Rectangular accumulator or module, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries 0 % 31.12.2018 *ex85075000 30 Cylindrical nickel-hydride accumulator or module, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries 0 % 31.12.2018 *ex85076000 30 Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries 0 % 31.12.2014 *ex85076000 40 Batteries of ion-lithium electric accumulators or module rechargeable with: 0 % 31.12.2017 *ex85076000 50 Modules for the assembly of batteries of ion lithium electric accumulators with: 0 % 31.12.2018 *ex85076000 55 Lithium-ion accumulator or module in cylindrical form, with: for the manufacture of rechargeable batteries 0 % 31.12.2017 *ex85076000 57 Lithium-ion accumulator or module, cuboid in shape, with: for the manufacture of rechargeable batteries 0 % 31.12.2017 *ex85076000 80 Rectangular lithium-ion-accumulator or module, with for use in the manufacture of rechargeable batteries for motor vehicles 0 % 31.12.2015 *ex85182995 30 Loudspeakers of: of a kind used for TV sets and video monitors manufacture as well as home entertainment systems 0 % 31.12.2017 *ex85229080 97 Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8521 0 % 31.12.2016 *ex85258019 *ex85258091 31 10 Closed circuit television (CCTV) camera: for use in CCTV surveillance systems 0 % 31.12.2018 ex85258019 50 Remote camera head, whether or not contained in a housing of a kind used in the manufacture of miniaturised industrial camera systems 0 % 31.12.2018 ex85258019 55 Camera module with a resolution of 1920 × 1080 P HD with two microphones for use in the manufacture of products falling within heading 8528 0 % 31.12.2018 *ex85285970 10 Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less, used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94 0 % 31.12.2018 *ex85299065 50 Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528 0 % 31.12.2016 *ex85299092 42 Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528 0 % 31.12.2018 *ex85299092 *ex85489090 44 55 LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only 0 % 31.12.2018 ex85364190 30 A cubic-shape power relay with: 0 % 31.12.2018 *ex85367000 10 Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528 0 % 31.12.2016 ex85371091 40 Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with a main power input of 400 V AC, a logic power input of 24 V DC, equipped at least with: used for controlling and powering machines of a kind used for recycling or sorting of plastic, metal or glass packaging 0 % 31.12.2018 ex85371099 30 Motor bridge ICs without programmable memory consisting of: 0 % 31.12.2018 *ex85389099 95 Copper base plate, of a kind used as a heatsink [in the manufacture] of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650 V or more but not more than 1200 V 0 % 31.12.2018 ex85443000 30 Multi-measurement wire harness of a voltage of 5 V or more but not more than 90 V capable of measuring some or all of the following; for use in the manufacture of vehicles of heading 8427 0 % 31.12.2018 ex87149110 ex87149110 ex87149110 23 33 70 Frame, constructed from aluminium or aluminium and carbon, for the use in the manufacture of bicycles 0 % 31.12.2018 ex87149130 ex87149130 ex87149130 23 33 70 Front forks, suspended, constructed from aluminium, for use in the manufacture of bicycles 0 % 31.12.2018 *ex90021100 50 Lens unit: 0 % 31.12.2018 ex90141000 30 Electronic compass, as a geomagnetic sensor, in a housing (e.g. CSWLP, LGA, SOIC) suitable for fully automated printed circuit board (PCB) assembly, with the following main components: of a kind used in the manufacture of products falling in chapters 84-90 and 94 0 % 31.12.2018 *ex90229000 10 Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, or coated with a layer of amorphous selenium 0 % 31.12.2018 *ex94054039 *ex94054099 80 07 Ambient light LED board to be incorporated in goods of heading 8528 0 % 31.12.2015

industrial monocarboxylic fatty acids of subheading 38231910,

methyl esters of fatty acids of heading 2915 or 2916,

fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,

fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,

stearic acid of subheading 38231100

goods of heading 3401

fatty acids with high purity of heading 2915 for the manufacture of chemical products other than products of heading 3826 or

goods of heading 1516

15 % or more but not more than 35 % of wheat derived Maltodextrin,

15 % or more but not more than 35 % of whey (milk serum),

10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,

10 % or more but not more than 30 % of blended, aged spray dried cheese,

5 % or more but not more than 15 % of buttermilk and

0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid

88 % or more but not more than 92 % of Ethanol,

2,2 % or more but not more than 2,7 % of Monoethylene glycol,

1,0 % but not more than 1,3 % of Methylethylketone,

0,36 % or more but not more than 0,40 % of anionic surfactant (ca.30 % active),

0,0293 % or more but not more than 0,0396 % of methyl isopropylketone,

0,0195 % or more but not more than 0,0264 % of 5 methyl-3-heptanone,

10 ppm or more but not more than 12 ppm of Denatonium Benzoate (Bitrex),

Not more than 0,01 of Perfumes,

6,5 % or more but not more than 8,0 % of water

90 % or more by weight of saturates, and

not more than 0,03 % by weight of sulphur,

of a purity by weight of 99,9 % or more,

with an average grain-size of 0,7 μm or more but not more than 2,1 μm

0,25 % of Sec-butyl bromide

0,06 % of n-butyl bromide

0,06 % of n-propyl bromide

57 % or more but not more than 63 % of aluminium oxide (CAS RN 1344-28-1)

37 % or more but not more than 42 % of titanium dioxide (CAS RN13463-67-7), and

1 % or more but not more than 2 % of triethoxycaprylyl silane (CAS RN 2943-75)

not more than 10 % by weight of naphthoquinonediazide esters,

2 % or more but not more than 35 % by weight of copolymers of hydroxystyrene

not more than 7 % by weight of epoxy-containing derivatives

Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,

Bacillus thuringiensis subsp. kurstaki or,

Bacillus thuringiensis subsp. israelensis or,

Bacillus thuringiensis subsp. aizawai or,

Bacillus thuringiensis subsp. tenebrionis

borated magnesium (C16-C24) alkylbenzene sulphonates and

mineral oils,

zinc bis[bis(tetrapropylenephenyl)] bis(hydrogen dithiophosphate) (CAS RN 11059-65-7),

triphenyl thiophosphate (CAS RN 597-82-0),

triphenyl phosphite (CAS RN 101-02-0), and

mineral oils,

mainly sulphurized diisobutylene,

calcium sulphonate,

dialkylaminoalkyl polyisobutylene succinate, and

mineral oils,

a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10,000 but not more than 20,000, and

more than 15 %, but not more than 30 % by weight of mineral oils,

20 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, and

mineral oils,

calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and

mineral oils,

o-amino polyisobutylenephenol (CAS RN 78330-13-9),

polyisobutylene succinimide (CAS RN 84605-20-9),

alkenylimidazoline (CAS RN 68784-17-8),

nonylated diphenylamine derivatives (CAS RN 36878-20-3 and CAS RN 27177-41-9), and

more than 30 %, but not more than 45 % by weight of mineral oils,

a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and

more than 50 % but not more than 75 % by weight of mineral oils,

borated succinimide compounds (CAS RN 134758-95-5), and

mineral oils,

an (C8-18) alkyl methacrylate and N-[3-(dimethylamino)propyl]methacrylamide copolymer,

an ethylene-propylene copolymer,

an ethylene-propylene copolymer chemically modified with succinic anhydride, 4-(4-nitrophenyl) aniline and 3-nitroaniline, and

more than 15 % but not more than 30 % by weight of mineral oils,

mainly sulphurized diisobutylene,

calcium sulphonate, and

dialkylaminoalkyl polyisobutylene succinate

more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and

more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),

industrial monocarboxylic fatty acids of heading 3823,

stearic acid of heading 3823,

stearic acid of heading 2915,

palmitic acid of heading 2915, or

animal feed preparations of heading 2309

industrial monocarboxylic fatty acids of heading 3823,

stearic acid of heading 3823,

stearic acid of heading 2915,

palmitic acid of heading 2915, or

animal feed preparations of heading 2309

trioctylphosphine oxide (CAS RN 78-50-2),

dioctylhexylphosphine oxide (CAS RN 31160-66-4),

octyldihexylphosphine oxide (CAS RN 31160-64-2) and

trihexylphosphine oxide (CAS RN 3084-48-8)

a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and

30 % or more but not more than 35 % by weight of isobutyl alcohol

Ferrite (Iron oxide) (CAS RN 1309-37-1)

Manganese oxide (CAS RN 1344-43-0)

Magnesium oxide (CAS RN 1309-48-4)

Styrene acrylate copolymer

52 % (± 10 %) of Cuprous Oxide (CAS RN 1317-39-1),

38 % (± 10 %) of Cupric Oxide (CAS RN 1317-38-0) and

10 % (± 5 %) of Metallic Copper (CAS RN 7440-50-8)

80 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and

10 % or more but not more than 20 % by weight of toluene (CAS RN 108-88-3)

0,1 % or more but not more than 0,5 % by weight of ammonia (CAS RN 1336-21-6) and

0,3 % or more but not more than 10 % by weight of polycarboxylate (linear polymers of acrylic acid)

5 % or less by weight of comonomer,

a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and

a density of 0,924 g/cm3 or more, but not more than 0,928 g/cm3

more than 5 %, but not more than 8 % by weight of comonomer,

a melt flow rate of 15 g/10 min or more, but not more than 60 g/10 min and

a density of 0,924 g/cm3 or more, but not more than 0,928 g/cm3

containing more than 5 % but not more than 20 % by weight of 1-hexene,

of a specific gravity of not more than 0,93,

manufactured using a metallocene catalyst

77 % or more but not more than 90 % of polycarbonate,

8 % or more but not more than 20 % of phosphoric acid ester,

0,1 % or more but not more than 1 % of antioxidant, and

a poly(olefin) layer with a thickness of more than 95 but not more than 110 microns

an adhesive layer with a thickness of more than 5 but not more than 15 microns

a layer based on epoxy resin, with a thickness of more than 4 but not more than 100 microns

a liner consisting of poly(ethylene terephthalate) with a thickness of more than 35 but not more than 40 microns

a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,

a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,

an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,

and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm

with a weight of 85 g/m2,

with a constant thickness of 95 μm (± 5 μm),

neither coated nor covered,

in 1 m wide rolls of 2000m to 5000 m length,

66 % or more of silicon carbide,

10 % or more of aluminium oxide

10ppm per°C or more but not more than 12ppm per°C in the length and width, and

20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)

an outer diameter of 60 mm or more but not more than 420 mm, and

a wall thickness of 10 mm or more but not more than 80 mm

with a diameter of 99,00 mm or more but not more than 136,5 mm (± 1mm),

whether or not with a ring-pull aperture

driven by on-off' single phase alternate current (AC) or brushless direct current (BLDC) variable speed motors

with a nominal power rating of not more than 1,5 kW

electrically heated,

with opening

with a multiplicity of tips (holes) of platinum/rhodium alloy

used to melt glass batches and condition molten glass

for drawing into continuous fibres

an angle of step of 7,5° (± 0,5°)

a two-phase winding,

a rated voltage of 9 V or more, but not more than 16,0 V

of a specified temperature range covering at least – 40 °C to + 105 °C

with or without connecting pinion

with or without motor drive connector

an angle of step of 7,5° (± 0,5°),

a pull-out torque at 25 °C of 25 mNm or more,

a pull-out pulse rate of 1500 pps or more,

a two-phase winding, and

a rated voltage of 10,5 V or more, but not more than 16,0 V

an internal diameter of 206,6 mm (± 0,5)

an external diameter of 265,0 mm (± 0,2) and

a width of 41,00 mm (± 0,3)

a rated power of not more than 100 W

an input voltage of 80 V or more, but not more than 305 V

an certified input frequency of 47 Hz or more, but not more than 440 Hz

one or more constant voltage output(s)

an operating temperature range of – 40 °C or more, but not more than + 85 °C,

pins for mounting to a printed circuit

whether or not containing a hole in the centre,

with a diameter of not more than 90 mm,

a nominal capacity of 32 Ah,

a length of not more than 205 mm,

a width of not more than 130 mm and

a height of not more than 190 mm

a length of 1203 mm or more, but not more than 1297 mm,

a width of 282 mm or more, but not more than 772 mm,

a height of 792 mm or more, but not more than 839 mm,

a weight of 260 kg or more, but not more than 293 kg,

power of 22 kWh or 26 kWh, and

constituted of 24 or 48 modules

a length of 298 mm or more, but not more than 408 mm,

a width of 33,5 mm or more, but not more than 209 mm,

a height of 138 mm or more, but not more than 228 mm,

a weight of 3,6 kg or more, but not more than 17 kg, and

a power of 458 Wh or more, but not more than 2158 Wh

a base similar to an ellipse squeezed in the middle,

a length of 49 mm or more (not including terminals),

a width of 33,5 mm or more,

a thickness of 9,9 mm or more,

a rated capacity of 1,75 Ah or more, and

a rated voltage of 3,7 V,

some of the corners rounded off,

a length of 76 mm or more (not including terminals),

a width of 54,5 mm or more,

a thickness of 5,2 mm or more,

a rated capacity of 3100 mAh or more, and

a rated voltage of 3,7 V,

a metal casing,

a length of 171 mm (± 3 mm),

a width of 45,5 mm (± 1 mm),

a height of 115 mm (± 1 mm),

a nominal voltage of 3,75 V and

a nominal capacity of 50 Ah

an impedance of 3 Ohm or more, but not more than 16 Ohm,

a nominal power of 2 W or more, but not more than 20 W,

with or without plastic bracket, and

with or without electric cable fitted with connectors,

of a weight of not more than 5,9 kg,

without a housing,

of dimensions of not more than 405 mm × 315 mm,

with a single Charge-Couple-Device (CCD) or Complementary Metal–Oxide–Semiconductor (CMOS) sensor,

with effective pixels of not more than 5 megapixels,

with dimensions (without cable socket) of not more than 27 × 30 × 38,5 mm (widthxheightxlength),

with three MOS imaging sensors with two or more effective megapixels per sensor and a prism block for distribution of the RGB spectrum colours to the three sensors,

with a C-Mount lens mount,

with a weight of not more than 70 g,

with an LVDS digital video output,

with a permanent EEPROM memory for local storage of calibration data for colour rendering and defective pixel compensation

without a housing, with back cover and mounting frame,

or with a housing,

an electromechanical switching function,

an electrification current of 3 amperes or more but not more than 16 amperes,

a driver voltage 5 volts or more but not more than 24 volts,

a distance between switching pins not more than 12,5 mm

a PCBA board(s) with logic and programmable circuits and other electronic parts as connectors, capacitors, coils or resistors,

contactors,

an automatic circuit breaker,

a fuse,

internal connecting cables,

a main power switch,

electrical connectors or cables for connecting external devices,

a metal casing with dimension of 370 × 300 × 80 mm or more, but not more than 570 × 420 × 125 mm,

one or more integrated circuits, not interconnected, on separate lead frames,

also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars

mounted in a plastic housing

a travel speed of not more than 24 km/h

a motor speed of not more than 4500 rpm

hydraulic pressure of not more than 25 Mpa

mass of not more than 50 metric tonnes

having a focal length of 25 mm or more but not more than 150 mm,

consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm

a combination of one or more application-specific integrated circuits (ASIC) and

one or more micro-electromechanical sensors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,

ANNEX II TARIFF SUSPENSIONS REFERRED TO IN POINT (3) OF ARTICLE 1

CN code TARIC ex15119019 10 ex15119091 10 ex15131110 10 ex15131930 10 ex15132110 10 ex15132930 10 ex28230000 10 ex28369917 20 ex29033990 70 ex29051900 11 ex29072300 10 ex29081900 10 ex29153900 20 ex29214200 86 ex29214900 70 ex29252900 20 ex29329900 80 ex29332100 50 ex29335995 15 ex29349990 55 ex29350090 17 ex29350090 88 ex32041100 20 ex32041100 40 ex32041100 50 ex32041100 60 ex32041100 70 ex32041200 10 ex32041300 10 ex32041300 30 ex32041300 40 ex32041500 10 ex32041500 60 ex32041700 10 ex32041700 15 ex32041700 20 ex32041700 25 ex32041700 30 ex32041700 35 ex32041700 40 ex32041700 50 ex32041700 60 ex32041700 65 ex32041700 70 ex32041700 75 ex32041700 80 ex32041700 85 ex32041700 88 ex32041900 70 ex32041900 71 ex32041900 73 ex32041900 77 ex32041900 84 ex32041900 85 ex32042000 20 ex32042000 30 ex32089019 15 ex37019900 10 ex37071000 40 ex38089190 30 ex38112900 20 ex38112900 40 ex38123080 75 ex38231930 20 ex38231990 20 ex38249097 18 ex38249097 33 ex39029090 94 ex39073000 60 ex39074000 30 ex39100000 40 ex39139000 85 ex39219055 25 ex56031290 60 ex56031390 60 ex69091900 80 ex70194000 10 ex70194000 20 ex70200010 10 ex76169990 77 ex81089050 85 ex83099090 10 ex85011099 80 ex85051100 70 ex85073020 30 ex85075000 20 ex85075000 30 ex85076000 20 ex85076000 30 ex85076000 40 ex85076000 50 ex85076000 55 ex85076000 57 ex85076000 80 ex85182995 30 ex85229080 97 ex85258019 31 ex85258091 10 ex85285970 10 ex85299065 50 ex85299065 55 ex85299065 60 ex85299092 42 ex85299092 44 ex85299092 48 ex85367000 10 ex85367000 20 ex85389099 95 ex90021100 50 ex90229000 10

ANNEX III SUPPLEMENTARY UNITS REFERRED TO IN POINT (1) OF ARTICLE 2

CN code TARIC Supplementary units ex39011010 10 m3 ex39019090 30 m3 ex39199000 67 m2 ex39219010 30 m2 ex39233090 10 p/st ex39269097 50 p/st ex39269097 55 m2 ex39269097 65 p/st ex56031490 40 m2 ex56039390 60 m2 ex84119900 40 p/st ex84119900 50 p/st ex84249000 30 p/st ex84312000 40 p/st ex84752900 10 p/st ex84834029 60 p/st ex85030099 50 p/st ex85044090 50 p/st ex85044090 60 p/st ex85087000 20 p/st ex85364190 30 p/st ex85371091 40 p/st ex85371099 30 p/st ex85371099 98 p/st ex85389099 95 p/st ex85437090 23 p/st ex85443000 30 p/st ex90019000 35 p/st ex90019000 45 p/st ex90141000 30 p/st ex90258040 30 p/st ex90291000 20 p/st ex90318038 20 p/st ex94019080 20 p/st ex94019080 30 p/st ex94019080 40 p/st ex94054039 50 p/st ex94054099 3 p/st ex94054099 6 p/st

ANNEX IV SUPPLEMENTARY UNITS REFERRED TO IN POINT (2) OF ARTICLE 2

CN code TARIC Supplementary units ex85299092 48 p/st ex85367000 20 p/st

Versions

  1. 2014-06-24

Cited by