Gelex

Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011

In forceVersion 2013-12-17from 2013-12-28
Grade B

mapped from publisher markup. A grade says how a document's structure was obtained, not how reliable the law is.

Ask Gelex about this law

Address https://gelex.eu/eli/EU/regulation/2013/1387@2013-12-17/en

Contents
  1. Preamble
    1. Article 1
    2. Article 2
    3. Article 3
    4. Article 4
    5. Article 5
  3. ANNEX
  4. ANNEX I
  5. ANNEX II

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1) The Union production of the agricultural and industrial products set out in Annex I is currently inadequate or non-existent, and thus the needs of user industries in the Union cannot be met.

(2) It is therefore in the interests of the Union to suspend partially or totally the autonomous Common Customs Tariff duties for those products.

(3) Council Regulation (EU) No 1344/2011 has been amended many times. In addition, following its amendment by Council Regulation (EU) No 1220/2012, fishery products were removed from the scope of Regulation (EU) No 1344/2011. In the interest of transparency, Regulation (EU) No 1344/2011 should therefore be replaced in its entirety.

(4) Regulations suspending the autonomous Common Customs Tariff duties on certain industrial and agricultural products have renewed previous measures to a great extent. Therefore, in the interests of rationalising the implementation of the measures concerned, it is appropriate not to limit the period of validity of this Regulation, as its scope can be adapted and products can be added to or removed from Annex I to this Regulation by means of a Council Regulation.

(5) In view of their temporary nature, the suspensions listed in Annex I to this Regulation should be reviewed systematically, and at the latest five years after their date of application or renewal. Moreover, it might be necessary at any time to close certain suspensions, following a proposal of the Commission on the basis of a review carried out on its own initiative or at the request of one or more Member States if it is no longer in the Union's interest to maintain the suspensions or due to technical product developments, changed circumstances or economic trends on the market.

(6) Statistics for certain products listed in Annex I to this Regulation are frequently expressed in pieces, square meters or measurement units other than weight. However, there are no such supplementary units in the Combined Nomenclature laid down in Annex I to Council Regulation (EEC) No 2658/87. It is therefore necessary to provide that not only the weight in kilograms or tonnes, but also the relevant supplementary units for the imports of the products concerned, are entered in the declaration for release for free circulation.

(7) Since the suspensions laid down in this Regulation must take effect on 1 January 2014, this Regulation should enter into force immediately upon its publication in the Official Journal of the European Union and should apply from 1 January 2014.

(8) In accordance with the principle of proportionality, it is necessary and appropriate for the achievement of the basic objectives of improving the competitive capacity of the Union industry, thereby enabling that industry to maintain or create employment and modernise its structures, to lay down rules on the suspension of the Common Customs Tariff duties for the products set out in Annex I. In accordance with Article 5(4) of the Treaty on European Union, this Regulation does not go beyond what is necessary to achieve the objectives pursued,

HAS ADOPTED THIS REGULATION:

Article 1

The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in Annex I are hereby suspended.

Article 2

1. The Commission may at any time review the suspensions for the products listed in Annex I in the following cases:

(a) at its own initiative;

(b) at the request of Member States.

2. The Commission shall review the suspensions in the year set out in Annex I.

Article 3

Where a declaration for release for free circulation is presented in respect of the products falling under the CN codes or TARIC codes listed in Annex II, the supplementary unit provided in that Annex shall be entered in the relevant field of that declaration.

Article 4

Regulation (EU) No 1344/2011 is hereby repealed.

Article 5

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union. It shall apply from 1 January 2014.

This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 17 December 2013. For the Council The President L. Linkevičius

ANNEX

ANNEX I

CN code TARIC Description Rate of autonomous duty Date foreseen for mandatory review ex07102100 10 Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals 0 % 31.12.2018 ex07108095 50 Bamboo shoots, frozen, not put up for retail sale 0 % 31.12.2018 ex07115900 11 Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry 0 % 31.12.2016 ex07123200 ex07123300 ex07123900 10 10 31 Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale 0 % 31.12.2018 ex08041000 30 Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries 0 % 31.12.2018 ex08104050 10 Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture (excluding packing) of products of drink or food industries 0 % 31.12.2018 08119050 08119070 ex08119095 70 Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter 0 % 31.12.2018 ex08119095 20 Boysenberries, frozen, not containing added sugar, not put up for retail sale 0 % 31.12.2018 ex08119095 30 Pineapple (Ananas comosus), in pieces, frozen 0 % 31.12.2018 ex08119095 40 Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter 0 % 31.12.2018 ex15119019 ex15119091 ex15131110 ex15131930 ex15132110 ex15132930 10 10 10 10 10 10 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: 0 % 31.12.2018 ex15159099 92 Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid 0 % 31.12.2018 ex15162096 20 Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process 0 % 31.12.2014 ex15179099 10 Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 50 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO) 0 % 31.12.2016 ex19023010 ex19030000 10 20 Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale 0 % 31.12.2018 ex20059100 10 Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg 0 % 31.12.2018 ex20079950 ex20079950 81 91 Acerola puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 9 % 31.12.2017 ex20079950 ex20079950 82 92 Acidified banana puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 11,5 % 31.12.2017 ex20079950 ex20079950 ex20079993 83 93 10 Mango puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 6 % 31.12.2017 ex20079950 ex20079950 84 94 Papaya puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 7,8 % 31.12.2017 ex20079950 ex20079950 85 95 Guava puree concentrate, obtained by cooking: for use in the manufacture of products of food and drink industry 6 % 31.12.2017 ex20089391 20 Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries 0 % 31.12.2017 ex20089948 94 Mango puree: used in the manufacture of products of drink industry 6 % 31.12.2015 ex20089949 ex20089999 30 40 Seedless boysenberry puree not containing added spirit, whether or not containing added sugar 0 % 31.12.2014 ex20089949 ex20089999 70 11 Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: for use in the manufacture of stuffed vine leaves with rice 0 % 31.12.2017 ex20094192 ex20094199 20 70 Pineapple juice: used in the manufacture of products of drink industry 8 % 31.12.2015 ex20094930 91 Pineapple juice, other than in powder form: used in the manufacture of products of food or drink industry 0 % 31.12.2014 ex20098131 10 Cranberry juice concentrate: 0 % 31.12.2014 ex20098979 20 Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more 0 % 31.12.2016 ex20098979 30 Frozen acerola juice concentrate: 0 % 31.12.2018 ex20098979 85 Acai berry juice concentrate: in immediate packings of a content of 10 kg or more 0 % 31.12.2016 ex20098999 93 Untreated frozen coconut water, in immediate packing of a content of 50 litres or more 0 % 31.12.2016 ex21061020 10 Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate 0 % 31.12.2018 ex21069092 45 Preparation containing by weight: standardized by weight to 3 % or more but not more than 4 % glabridin 0 % 31.12.2016 ex25199010 10 Fused magnesia with a purity by weight of 97 % or more 0 % 31.12.2016 ex28045090 10 Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % by weight (CAS RN 13494-80-9) 0 % 31.12.2018 28047000 Phosphorus 0 % 31.12.2018 ex28051990 10 Lithium metal of a purity by weight of 99,7 % or more (CAS RN 7439-93-2) 0 % 31.12.2017 ex28053010 10 Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium 0 % 31.12.2018 ex28053090 ex28053090 ex28053090 45 55 65 Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more 0 % 31.12.2015 ex28111980 10 Sulphamidic acid (CAS RN 5329-14-6) 0 % 31.12.2018 ex28111980 20 Hydrogen iodide (CAS RN 10034-85-2) 0 % 31.12.2016 ex28111980 30 Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry 0 % 31.12.2017 ex28112200 10 Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges 0 % 31.12.2018 ex28112200 30 Balls of porous white silica of a particle size of more than 1 μm for use in the manufacture of cosmetic products 0 % 31.12.2016 ex28129000 10 Nitrogen trifluoride (CAS RN 7783-54-2) 0 % 31.12.2018 ex28164000 10 Barium hydroxide (CAS RN 17194-00-2) 0 % 31.12.2017 ex28181091 10 Sintered corundum with micro crystalline structure, containing by weight: and with less than 50 % of the total weight having a particle size of more than 10 mm 0 % 31.12.2015 ex28182000 10 Activated alumina with a specific surface area of at least 350 m2/g 0 % 31.12.2014 ex28183000 10 Aluminium hydroxide oxide in the form of pseudo-boehmite 4 % 31.12.2018 28191000 Chromium trioxide (CAS RN 1333-82-0) 0 % 31.12.2016 ex28199090 10 Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9) 0 % 31.12.2016 ex28230000 10 Titanium dioxide (CAS RN 13463-67-7): 0 % 31.12.2017 ex28230000 20 Titanium dioxide (CAS RN 13463-67-7) with a purity by weight of 99,7 % or more and containing by weight: for use in the metallurgy 0 % 31.12.2017 ex28251000 10 Hydroxylammonium chloride (CAS RN 5470-11-1) 0 % 31.12.2017 ex28255000 20 Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride 0 % 31.12.2018 ex28256000 10 Zirconium dioxide (CAS RN 1314-23-4) 0 % 31.12.2017 ex28261990 10 Tungsten hexafluoride with a purity of 99,9 % by weight or more (CAS RN 7783-82-6) 0 % 31.12.2015 ex28269080 15 Lithium hexafluorophosphate (CAS RN 21324-40-3) 0 % 31.12.2016 ex28273985 10 Copper monochloride of a purity by weight of 96 % or more but not more than 99 % (CAS RN 7758-89-6) 0 % 31.12.2018 ex28273985 20 Antimony pentachloride of a purity by weight of 99 % or more (CAS RN 7647-18-9) 0 % 31.12.2016 ex28273985 30 Manganese dichloride (CAS RN 7773-01-5) 0 % 31.12.2014 ex28274990 10 Hydrated zirconium dichloride oxide 0 % 31.12.2018 ex28301000 10 Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight 0 % 31.12.2018 ex28332980 20 Manganese sulphate monohydrate (CAS RN 10034-96-5) 0 % 31.12.2018 ex28332980 30 Zirconium sulphate (CAS RN 14644-61-2) 0 % 31.12.2015 ex28351000 10 Sodium hypophosphite monohydrate (CAS RN 10039-56-2) 0 % 31.12.2017 ex28369100 20 Lithium carbonate, containing one or more of the following impurities at the concentrations indicated: determined according to the methods specified in the European Pharmacopœia 0 % 31.12.2018 ex28369917 20 Zirconium (IV) basic carbonate (CAS RN 15667-84-2) 0 % 31.12.2018 ex28371900 20 Copper cyanide (CAS RN 544-92-3) 0 % 31.12.2018 ex28372000 10 Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9) 0 % 31.12.2016 ex28372000 20 Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5) 0 % 31.12.2017 ex28391900 10 Disodium disilicate (CAS RN 13870-28-5) 0 % 31.12.2017 ex28399000 20 Calcium silicate (CAS RN 1344-95-2) 0 % 31.12.2018 28413000 Sodium dichromate (CAS RN 10588-01-9) 0 % 31.12.2018 ex28418000 10 Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5) 0 % 31.12.2017 ex28419085 10 Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3) 0 % 31.12.2017 ex28419085 20 Potassium titanium oxide in powder form with a purity of 99 % or more (CAS RN 12056-51-8) 0 % 31.12.2018 ex28421000 10 Synthetic Beta Zeolite powder 0 % 31.12.2018 ex28421000 20 Synthetic Chabasite Zeolite Powder 0 % 31.12.2014 ex28429010 10 Sodium selenate (CAS RN 13410-01-0) 0 % 31.12.2014 ex28432900 10 Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by weight of the metal content, for the manufacture of silver oxide batteries 0 % 31.12.2016 28451000 Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0) 0 % 31.12.2018 28459010 Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom) 0 % 31.12.2018 ex28459090 10 Helium-3 (CAS RN 14762-55-1) 0 % 31.12.2016 ex28459090 20 Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2) 0 % 31.12.2018 ex28459090 30 (13C)Carbon monoxide (CAS RN 1641-69-6) 0 % 31.12.2016 ex28459090 40 Iron boride enriched at a level of more than 95 % by weight with boron-10 (CAS RN 200513-39-9) 0 % 31.12.2018 ex28461000 ex38249097 10 48 Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight 0 % 31.12.2018 ex28461000 20 Dicerium tricarbonate, whether or not hydrated (CAS RN 537-01-9) 0 % 31.12.2018 ex28461000 30 Cerium lanthanum carbonate, whether or not hydrated 0 % 31.12.2018 ex28461000 40 Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated 0 % 31.12.2014 28469000 Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 28461000 0 % 31.12.2018 ex28480000 10 Phosphine (CAS RN 7803-51-2) 0 % 31.12.2018 ex28500020 10 Silane (CAS RN 7803-62-5) 0 % 31.12.2018 ex28500020 20 Arsine (CAS RN 7784-42-1) 0 % 31.12.2018 ex28500020 30 Titanium nitride with a particle size of not more than 250 nm (CAS RN 25583-20-4) 0 % 31.12.2017 ex28500020 40 Germanium tetrahydride (CAS RN 7782-65-2) 0 % 31.12.2016 ex28500020 50 Sodium tetrahydroborate (CAS 16940-66-2) with: for use as an additive in the manufacture of oxygen barrier polymer articles 0 % 31.12.2017 ex28500060 10 Sodium azide (CAS RN 26628-22-8) 0 % 31.12.2018 ex28530090 10 Chlorosulphonyl isocyanate (CAS RN 1189-71-5) 0 % 31.12.2016 ex29033990 10 Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0) 0 % 31.12.2018 ex29033990 15 Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0) 0 % 31.12.2016 ex29033990 25 2,3,3,3-Tetrafluoroprop-1-ene (CAS RN 754-12-1) 0 % 31.12.2017 ex29033990 30 Perfluoroethane (CAS RN 76-16-4) 0 % 31.12.2018 ex29033990 40 1,1-Difluoroethane (CAS RN 75-37-6) 0 % 31.12.2018 ex29033990 50 1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1) 0 % 31.12.2018 ex29033990 70 1,1,1,2-Tetrafluoroethane, certified odourless containing a maximum: for use in the manufacture of pharmaceutical grade propellant for medical metred dose inhalers (CAS RN 811-97-2) 0 % 31.12.2016 ex29033990 75 Trans-1,3,3,3-tetrafluoroprop-1-ene (CAS RN 1645-83-6) 0 % 31.12.2018 ex29033990 80 Hexafluoropropene (CAS RN 116-15-4) 0 % 31.12.2016 ex29037730 10 1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5) 0 % 31.12.2018 ex29037790 10 Chlorotrifluoroethylene (CAS RN 79-38-9) 0 % 31.12.2016 ex29038990 10 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) 0 % 31.12.2018 ex29038990 30 Octafluorocyclopentene (CAS RN 559-40-0) 0 % 31.12.2016 ex29038990 40 Hexabromocyclododecane 0 % 31.12.2016 ex29038990 50 Chlorocyclopentane (CAS RN 930-28-9) 0 % 31.12.2017 ex29039990 20 1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9) 0 % 31.12.2018 ex29039990 40 2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing: 0 % 31.12.2018 ex29039990 50 Fluorobenzene (CAS RN 462-06-6) 0 % 31.12.2018 ex29039990 70 α,α,α′,α′-Tetrachloro-o-xylen (CAS RN 25641-99-0) 0 % 31.12.2015 ex29039990 80 1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9) 0 % 31.12.2018 ex29039990 85 2-Bromo-9H-fluorene (CAS RN 1133-80-8) 0 % 31.12.2018 ex29041000 30 Sodium p-styrenesulphonate (CAS RN 2695-37-6) 0 % 31.12.2014 ex29041000 50 Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8) 0 % 31.12.2014 ex29042000 10 Nitromethane (CAS RN 75-52-5) 0 % 31.12.2015 ex29042000 20 Nitroethane (CAS RN 79-24-3) 0 % 31.12.2015 ex29042000 30 1-Nitropropane (CAS RN 108-03-2) 0 % 31.12.2015 ex29042000 40 2-Nitropropane (CAS RN 79-46-9) 0 % 31.12.2014 ex29049040 10 Trichloronitromethane, for the manufacture of goods of subheading 380892 (CAS RN 76-06-2) 0 % 31.12.2014 ex29049095 20 1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7) 0 % 31.12.2014 ex29049095 30 Tosyl chloride (CAS RN 98-59-9) 0 % 31.12.2014 ex29049095 40 4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2) 0 % 31.12.2017 ex29049095 50 Ethanesulphonyl chloride (CAS RN 594-44-5) 0 % 31.12.2018 ex29051900 11 Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN 0 % 31.12.2018 ex29051900 30 2,6-Dimethylheptan-4-ol (CAS RN 108-82-7) 0 % 31.12.2018 ex29051900 40 2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7) 0 % 31.12.2014 ex29051900 70 Titanium tetrabutanolate (CAS RN 5593-70-4) 0 % 31.12.2017 ex29051900 80 Titanium tetraisopropoxide (CAS RN 546-68-9) 0 % 31.12.2017 ex29051900 85 Titanium tetraethanolate (CAS RN 3087-36-3) 0 % 31.12.2018 ex29052990 10 3,5-Dimethylhex-1-yn-3-ol (CAS RN 107-54-0) 0 % 31.12.2014 ex29052990 20 Dec-9-en-1-ol (CAS RN 13019-22-2) 0 % 31.12.2014 ex29052990 30 Dodeca-8,10-dien-1-ol (CAS RN 33956-49-9) 0 % 31.12.2015 ex29053995 10 Propane-1,3-diol (CAS RN 504-63-2) 0 % 31.12.2015 ex29053995 20 Butane-1,2-diol (CAS RN 584-03-2) 0 % 31.12.2016 ex29053995 30 2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7) 0 % 31.12.2016 ex29053995 40 Decane-1,10-diol (CAS RN 112-47-0) 0 % 31.12.2017 ex29053995 50 2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2) 0 % 31.12.2018 ex29054900 10 Ethylidynetrimethanol (CAS RN 77-85-0) 0 % 31.12.2014 ex29055998 20 2,2,2-Trifluoroethanol (CAS RN 75-89-8) 0 % 31.12.2014 29061100 Menthol (CAS RN 1490-04-6) 0 % 31.12.2018 ex29061900 10 Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8) 0 % 31.12.2018 ex29061900 20 4,4′-Isopropylidenedicyclohexanol (CAS RN 80-04-6) 0 % 31.12.2018 ex29062900 10 2,2′-(m-Phenylene)dipropan-2-ol (CAS RN 1999-85-5) 0 % 31.12.2014 ex29062900 20 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7) 0 % 31.12.2018 ex29062900 30 2-Phenylethanol (CAS RN 60-12-8) 0 % 31.12.2017 ex29071590 10 2-Naphthol (CAS RN 135-19-3) 0 % 31.12.2016 ex29071990 10 2,3,5-Trimethylphenol (CAS RN 697-82-5) 0 % 31.12.2014 ex29071990 20 Biphenyl-4-ol (CAS RN 92-69-3) 0 % 31.12.2018 ex29072100 10 Resorcinol (CAS RN 108-46-3) 0 % 31.12.2018 ex29072300 10 4,4′-Isopropylidenediphenol (CAS RN 80-05-7) 0 % 31.12.2017 ex29072900 15 6,6′-Di-tert-butyl-4,4′-butylidenedi-m-cresol (CAS RN 85-60-9) 0 % 31.12.2018 ex29072900 20 4,4′-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4) 0 % 31.12.2018 ex29072900 30 4,4′,4″-Ethylidynetriphenol (CAS RN 27955-94-8) 0 % 31.12.2018 ex29072900 35 4-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol (CAS RN 1745-89-7) 0 % 31.12.2016 ex29072900 40 2,3,5-Trimethylhydroquinone (CAS RN 700-13-0) 0 % 31.12.2016 ex29072900 45 2-Methylhydroquinone (CAS RN 95-71-6) 0 % 31.12.2016 ex29072900 50 6,6′,6″-Tricyclohexyl-4,4′,4″-butane-1,1,3-triyltri (m-cresol) (CAS RN 111850-25-0) 0 % 31.12.2018 ex29072900 55 Biphenyl-2,2′-diol (CAS RN 1806-29-7) 0 % 31.12.2017 ex29072900 70 2,2′,2″,6,6′,6″-Hexa-tert-butyl-α,α′,α″-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2) 0 % 31.12.2018 ex29072900 85 Phloroglucinol whether or not hydrated 0 % 31.12.2018 ex29081900 10 Pentafluorophenol (CAS RN 771-61-9) 0 % 31.12.2018 ex29081900 20 4,4′-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) 0 % 31.12.2018 ex29089900 30 4-Nitrophenol (CAS RN 100-02-7) 0 % 31.12.2018 ex29089900 40 4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4) 0 % 31.12.2017 ex29091990 20 Bis(2-chloroethyl) ether (CAS RN 111-44-4) 0 % 31.12.2018 ex29091990 30 Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more 0 % 31.12.2018 ex29091990 50 3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9) 0 % 31.12.2016 ex29091990 60 1-Methoxyheptafluoropropane (CAS RN 375-03-1) 0 % 31.12.2018 ex29092000 10 8-Methoxycedrane (CAS RN 19870-74-7) 0 % 31.12.2016 ex29093038 10 Bis(pentabromophenyl) ether (CAS RN 1163-19-5) 0 % 31.12.2018 ex29093038 20 1,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2) 0 % 31.12.2016 ex29093090 10 2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7) 0 % 31.12.2014 ex29093090 20 1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1) 0 % 31.12.2014 ex29093090 30 3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) 0 % 31.12.2015 ex29095000 10 4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9) 0 % 31.12.2018 ex29095000 20 Ubiquinol (CAS RN 992-78-9) 0 % 31.12.2015 ex29096000 10 Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3) 0 % 31.12.2018 ex29096000 20 1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3) 0 % 31.12.2016 ex29109000 15 1,2-Epoxycyclohexane (CAS RN 286-20-4) 0 % 31.12.2018 ex29109000 30 2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5) 0 % 31.12.2018 ex29109000 80 Allyl glycidyl ether (CAS RN 106-92-3) 0 % 31.12.2016 ex29122900 40 (2E,4E,6E,8E,10E,12E)-2,7,11-Trimethyl-13-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8,10,12-tridecahexaenal (CAS RN 1638-05-7) 0 % 31.12.2016 ex29122900 50 4-Isobutylbenzaldehyde (CAS RN 40150-98-9) 0 % 31.12.2017 ex29122900 60 3,4-Dimethylbenzaldehyde (CAS RN 5973-71-7) 0 % 31.12.2018 ex29124900 10 3-Phenoxybenzaldehyde (CAS RN 39515-51-0) 0 % 31.12.2018 ex29124900 20 4-Hydroxybenzaldehyde (CAS RN 123-08-0) 0 % 31.12.2017 ex29124900 30 Salicylaldehyde (CAS RN 90-02-8) 0 % 31.12.2015 ex29141990 20 Heptan-2-one (CAS RN 110-43-0) 0 % 31.12.2017 ex29141990 30 3-Methylbutanone (CAS RN 563-80-4) 0 % 31.12.2017 ex29141990 40 Pentan-2-one (CAS RN 107-87-9) 0 % 31.12.2017 ex29142900 20 Cyclohexadec-8-enone (CAS RN 3100-36–5) 0 % 31.12.2018 ex29142900 30 (R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) 0 % 31.12.2015 ex29142900 40 Camphor 0 % 31.12.2018 ex29142900 50 trans-β-Damascone (CAS RN 23726-91-2) 0 % 31.12.2016 ex29143900 30 Benzophenone (CAS RN 119-61-9) 0 % 31.12.2017 ex29143900 50 4-Phenylbenzophenone (CAS RN 2128-93-0) 0 % 31.12.2018 ex29143900 60 4-Methylbenzophenone (CAS RN 134-84-9) 0 % 31.12.2018 ex29143900 70 Benzil (CAS RN 134-81-6) 0 % 31.12.2017 ex29143900 80 4′-Methylacetophenone (CAS RN 122-00-9) 0 % 31.12.2017 ex29145000 20 3′-Hydroxyacetophenone (CAS RN 121-71-1) 0 % 31.12.2015 ex29145000 25 4′-Methoxyacetophenone (CAS RN 100-06-1) 0 % 31.12.2018 ex29145000 30 2′-Hydroxyacetophenone (CAS RN 118-93-4) 0 % 31.12.2018 ex29145000 36 2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5) 0 % 31.12.2018 ex29145000 40 4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2) 0 % 31.12.2016 ex29145000 45 3,4-Dihydroxybenzophenone (CAS RN 10425-11-3) 0 % 31.12.2017 ex29145000 60 2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8) 0 % 31.12.2017 ex29145000 70 16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2) 0 % 31.12.2017 ex29145000 80 2′,6′-Dihydroxyacetophenone (CAS RN 699-83-2) 0 % 31.12.2018 ex29146990 10 2-Ethylanthraquinone (CAS RN 84-51-5) 0 % 31.12.2018 ex29146990 20 2-Pentylanthraquinone (CAS RN 13936-21-5) 0 % 31.12.2014 ex29146990 30 1,4-Dihydroxyanthraquinone (CAS RN 81-64-1) 0 % 31.12.2018 ex29146990 40 p-Benzoquinone (CAS RN 106-51-4) 0 % 31.12.2016 ex29147000 20 2,4′-Difluorobenzophenone (CAS RN 342-25-6) 0 % 31.12.2017 ex29147000 40 Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8) 0 % 31.12.2018 ex29147000 50 3′-Chloropropiophenone (CAS RN 34841-35-5) 0 % 31.12.2018 ex29147000 60 4′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone (CAS RN 81-14-1) 0 % 31.12.2015 ex29147000 70 4-Chloro-4′-hydroxybenzophenone (CAS RN 42019-78-3) 0 % 31.12.2016 ex29152900 10 Antimony triacetate (CAS RN 6923-52-0) 0 % 31.12.2018 ex29153900 20 Isopentyl acetate (CAS RN 123-92-2) 0 % 31.12.2017 ex29153900 40 tert-Butyl acetate (CAS RN 540-88-5) 0 % 31.12.2018 ex29153900 50 3-Acetylphenyl acetate (CAS RN 2454-35-5) 0 % 31.12.2014 ex29153900 60 Dodec-8-enyl acetate (CAS RN 28079-04-1) 0 % 31.12.2015 ex29153900 65 Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) 0 % 31.12.2015 ex29153900 70 Dodec-9-enyl acetate (CAS RN 16974-11-1) 0 % 31.12.2015 ex29153900 75 Isobornyl acetate (CAS RN 125-12-2) 0 % 31.12.2016 ex29153900 80 1-Phenylethyl acetate (CAS RN 93-92-5) 0 % 31.12.2016 ex29153900 85 2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5) 0 % 31.12.2018 ex29156019 10 Ethyl butyrate (CAS RN 105-54-4) 0 % 31.12.2017 ex29159070 30 3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) 0 % 31.12.2017 ex29159070 40 Nonanoic acid (pelargonic acid) (CAS RN 112-05-0) 0 % 31.12.2018 ex29159070 50 Allyl heptanoate (CAS RN 142-19-8) 0 % 31.12.2014 ex29159070 55 Triethyl orthoformate (CAS RN 122-51-0) 0 % 31.12.2018 ex29159070 60 Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) 0 % 31.12.2015 ex29159070 70 Cobalt borate neodecanoate complexes, with a purity by weight of 92 % or more (CAS RN 68457-13-6) 0 % 31.12.2016 ex29159070 75 2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9) 0 % 31.12.2017 ex29159070 80 Ethyl difluoroacetate (CAS RN 454-31-9) 0 % 31.12.2016 ex29161200 10 2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6) 0 % 31.12.2018 ex29161200 40 2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2) 0 % 31.12.2018 ex29161200 70 2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3) 0 % 31.12.2017 ex29161300 10 Hydroxyzinc methacrylate powder (CAS RN 63451-47-8) 0 % 31.12.2014 ex29161300 20 Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9) 0 % 31.12.2018 ex29161400 10 2,3-Epoxypropyl methacrylate (CAS RN 106-91-2) 0 % 31.12.2018 ex29161995 20 Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1) 0 % 31.12.2018 ex29161995 40 Sorbic acid for use in the manufacture of animal feeds (CAS RN 110-44-1) 0 % 31.12.2018 ex29162000 50 Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6) 0 % 31.12.2018 ex29162000 60 3-Cyclohexylpropionic acid (CAS RN 701-97-3) 0 % 31.12.2015 ex29163100 10 Benzyl benzoate (CAS RN 120-51-4) 0 % 31.12.2016 ex29163990 10 2,3,4,5-Tetrafluorobenzoic acid (CAS RN 1201-31-6) 0 % 31.12.2016 ex29163990 15 2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3) 0 % 31.12.2016 ex29163990 20 3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6) 3,6 % 31.12.2018 ex29163990 25 2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8) 0 % 31.12.2015 ex29163990 30 2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) 0 % 31.12.2015 ex29163990 35 Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9) 0 % 31.12.2018 ex29163990 38 6-Bromonaphthalene-2-carboxylic acid (CAS RN 5773-80-8) 0 % 31.12.2018 ex29163990 45 2-Chlorobenzoic acid (CAS RN 118-91-2) 0 % 31.12.2016 ex29163990 50 3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1) 0 % 31.12.2018 ex29163990 55 4-tert-Butylbenzoic acid (CAS RN 98-73-7) 0 % 31.12.2017 ex29163990 60 4-Ethylbenzoyl chloride (CAS RN 16331-45-6) 0 % 31.12.2018 ex29163990 70 Ibuprofen (INN) (CAS RN 15687-27-1) 0 % 31.12.2018 ex29163990 75 m-Toluic acid (CAS RN 99-04-7) 0 % 31.12.2017 ex29163990 85 (2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0) 0 % 31.12.2017 ex29171100 20 Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1) 0 % 31.12.2018 ex29171100 30 Cobalt oxalate (CAS RN 814-89-1) 0 % 31.12.2014 ex29171910 10 Dimethyl malonate (CAS RN 108-59-8) 0 % 31.12.2014 ex29171910 20 Diethyl malonate (CAS RN 105-53-3) 0 % 31.12.2017 ex29171990 20 Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate (CAS RN 23386-52-9) 0 % 31.12.2018 ex29171990 30 Ethylene brassylate (CAS RN 105-95-3) 0 % 31.12.2014 ex29171990 50 Tetradecanedioic acid (CAS RN 821-38-5) 0 % 31.12.2015 ex29171990 70 Itaconic acid (CAS RN 97-65-4) 0 % 31.12.2018 ex29172000 30 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5) 0 % 31.12.2018 ex29172000 40 3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6) 0 % 31.12.2018 ex29173400 10 Diallyl phthalate (CAS RN 131-17-9) 0 % 31.12.2018 ex29173995 20 Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) 0 % 31.12.2015 ex29173995 30 Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) 0 % 31.12.2015 ex29181600 20 Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5) 0 % 31.12.2018 ex29181998 20 L-Malic acid (CAS RN 97-67-6) 0 % 31.12.2018 ex29182900 10 Monohydroxynaphthoic acids 0 % 31.12.2018 ex29182900 35 Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9) 0 % 31.12.2017 ex29182900 50 Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) 0 % 31.12.2018 ex29182900 60 Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3) 0 % 31.12.2016 ex29183000 30 Methyl-2-benzoylbenzoate (CAS RN 606-28-0) 0 % 31.12.2018 ex29183000 50 Ethyl acetoacetate (CAS RN 141-97-9) 0 % 31.12.2017 ex29189990 10 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0) 0 % 31.12.2018 ex29189990 15 Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8) 0 % 31.12.2017 ex29189990 20 Methyl 3-methoxyacrylate (CAS RN 5788-17-0) 0 % 31.12.2014 ex29189990 30 Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2) 0 % 31.12.2018 ex29189990 40 trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6) 0 % 31.12.2018 ex29189990 50 Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0) 0 % 31.12.2018 ex29189990 60 3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2) 0 % 31.12.2018 ex29189990 70 Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8) 0 % 31.12.2014 ex29189990 80 Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9) 0 % 31.12.2016 ex29199000 10 2,2′-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) 0 % 31.12.2018 ex29199000 30 Aluminium hydroxybis[2,2′-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5) 0 % 31.12.2018 ex29199000 40 Tri-n-hexylphosphate (CAS RN 2528-39-4) 0 % 31.12.2018 ex29199000 50 Triethyl phosphate (CAS RN 78-40-0) 0 % 31.12.2016 ex29201900 10 Fenitrothion (ISO) (CAS RN 122-14-5) 0 % 31.12.2018 ex29201900 20 Tolclofos-methyl (ISO) (CAS RN 57018-04-9) 0 % 31.12.2018 ex29209010 10 Diethyl sulphate (CAS RN 64-67-5) 0 % 31.12.2018 ex29209010 20 Diallyl 2,2′-oxydiethyl dicarbonate (CAS RN 142-22-3) 0 % 31.12.2018 ex29209010 40 Dimethyl carbonate (CAS RN 616-38-6) 0 % 31.12.2018 ex29209010 50 Di-tert-butyl dicarbonate (CAS RN 24424-99-5) 0 % 31.12.2018 ex29209010 60 2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) 0 % 31.12.2017 29209030 Trimethyl phosphite (CAS RN 121-45-9) 0 % 31.12.2018 29209040 Triethyl phosphite (CAS RN 122-52-1) 0 % 31.12.2016 ex29209085 10 O,O′-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6) 0 % 31.12.2018 ex29209085 20 Tris(methylphenyl)phosphite (CAS RN 25586-42-9) 0 % 31.12.2015 ex29209085 30 2,2′-[[3,3′,5,5′-Tetrakis(1,1-dimethylethyl)[1,1′-biphenyl]-2,2′-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2) 0 % 31.12.2015 ex29209085 40 Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) 0 % 31.12.2015 ex29209085 50 Fosetyl-aluminium (CAS RN 39148-24-8) 0 % 31.12.2018 ex29209085 60 Bis(neopentylglycolato)diboron (CAS RN 201733-56-4) 0 % 31.12.2018 ex29211950 ex29299000 10 20 Diethylamino-triethoxysilane (CAS RN 35077-00-0) 0 % 31.12.2014 ex29211960 10 2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9) 0 % 31.12.2017 ex29211999 20 Ethyl(2-methylallyl)amine (CAS RN 18328-90-0) 0 % 31.12.2018 ex29211999 30 Allylamine (CAS RN 107-11-9) 0 % 31.12.2018 ex29211999 60 Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN 175923-04-3) 0 % 31.12.2018 ex29211999 70 N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8) 0 % 31.12.2017 ex29212900 20 Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0) 0 % 31.12.2018 ex29212900 30 Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1) 0 % 31.12.2018 ex29212900 40 Decamethylenediamine (CAS RN 646-25-3) 0 % 31.12.2015 ex29212900 50 N′-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4) 0 % 31.12.2016 ex29213099 30 1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6) 0 % 31.12.2015 ex29213099 40 Cyclopropylamin (CAS RN 765-30-0) 0 % 31.12.2017 ex29214200 15 4-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2) 0 % 31.12.2018 ex29214200 20 3-Chloroaniline (CAS RN 108-42-9) 0 % 31.12.2018 ex29214200 25 Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5) 0 % 31.12.2018 ex29214200 35 2-Nitroaniline (CAS RN 88-74-4) 0 % 31.12.2018 ex29214200 45 2,4,5-Trichloroaniline (CAS RN 636-30-6) 0 % 31.12.2018 ex29214200 50 3-Aminobenzenesulfonic acid (CAS RN 121-47-1) 0 % 31.12.2018 ex29214200 70 2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2) 0 % 31.12.2014 ex29214200 80 4-Chloro-2-nitroaniline (CAS RN 89-63-4) 0 % 31.12.2018 ex29214200 82 2-Chloro-4-nitroaniline (CAS RN 121-87-9) 0 % 31.12.2015 ex29214200 85 3,5-Dichloroaniline (CAS RN 626-43-7) 0 % 31.12.2018 ex29214200 86 2,5-Dichloroaniline of a purity by weight of 99,5 % or more (CAS RN 95-82-9) 0 % 31.12.2017 ex29214200 87 N-Methylaniline (CAS RN 100-61-8) 0 % 31.12.2017 ex29214200 88 3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0) 0 % 31.12.2017 ex29214300 20 4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7) 0 % 31.12.2018 ex29214300 30 3-Nitro-p-toluidine (CAS RN 119-32-4) 0 % 31.12.2018 ex29214300 40 4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8) 0 % 31.12.2018 ex29214300 50 4-Aminobenzotrifluoride (CAS RN 455-14-1) 0 % 31.12.2015 ex29214300 60 3-Aminobenzotrifluoride (CAS RN 98-16-8) 0 % 31.12.2015 ex29214300 70 N-Ethyl-m-toluidine (CAS RN 102-27-2) 0 % 31.12.2016 ex29214300 80 6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) 0 % 31.12.2017 ex29214400 20 Diphenylamine (CAS RN 122-39-4) 0 % 31.12.2018 ex29214500 10 Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) 0 % 31.12.2014 ex29214500 20 2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6) 0 % 31.12.2018 ex29214500 40 1-Naphthylamine (CAS RN 134-32-7) 0 % 31.12.2014 ex29214500 50 7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6) 0 % 31.12.2018 ex29214900 20 Pendimethalin (ISO) (CAS RN 40487-42-1) 3,5 % 31.12.2018 ex29214900 40 N-1-Naphthylaniline (CAS RN 90-30-2) 0 % 31.12.2018 ex29214900 60 N-Benzyl-N-ethylaniline (CAS RN 92-59-1) 0 % 31.12.2014 ex29214900 70 2-Chlorobenzylamine (CAS RN 89-97-4) 0 % 31.12.2015 ex29214900 80 4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5) 0 % 31.12.2015 ex29214900 85 4-Isopropylaniline (CAS RN 99-88-7) 0 % 31.12.2017 ex29215119 20 Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight 0 % 31.12.2018 ex29215119 30 2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9) 0 % 31.12.2018 ex29215119 40 p-Phenylenediamine (CAS RN 106-50-3) 0 % 31.12.2016 ex29215119 50 Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene 0 % 31.12.2014 ex29215119 60 2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1) 0 % 31.12.2018 ex29215990 10 Mixture of isomers of 3,5-diethyltoluenediamine 0 % 31.12.2018 ex29215990 30 3,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) 0 % 31.12.2017 ex29215990 40 4,4′-Diaminostilbene-2,2′-disulphonic acid (CAS RN 81-11-8) 0 % 31.12.2018 ex29215990 50 N-Ethyl-N′,N′-dimethyl-N-phenyl-ethylene-1,2-diamine (CAS RN 27692-91-7) 0 % 31.12.2014 ex29215990 60 (2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8) 0 % 31.12.2017 ex29221985 20 2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9) 0 % 31.12.2017 ex29221985 25 Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2) 0 % 31.12.2017 ex29221985 30 N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) (CAS RN 3033-62-3) 0 % 31.12.2018 ex29221985 40 2-(Dimethylamino)ethyl benzoate (CAS RN 2208-05-1) 0 % 31.12.2014 ex29221985 45 2-[2-Hydroxyethyl(octadecyl)amino]ethanol (CAS RN 10213-78-2) 0 % 31.12.2016 ex29221985 50 2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0) 0 % 31.12.2018 ex29221985 60 N,N,N′-trimethyl-N′-(2-hydroxy-ethyl) 2,2′-oxybis(ethylamine), (CAS RN 83016-70-0) 0 % 31.12.2018 ex29221985 65 trans-4-Aminocyclohexanol (CAS RN 27489-62-9) 0 % 31.12.2018 ex29221985 70 D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol (CAS RN 716-61-0) 0 % 31.12.2016 ex29221985 75 2-Ethoxyethylamine (CAS RN 110-76-9) 0 % 31.12.2018 ex29221985 80 N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine, (CAS RN 189253-72-3) 0 % 31.12.2014 ex29221985 85 (1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0) 0 % 31.12.2018 ex29222100 10 2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2) 0 % 31.12.2018 ex29222100 30 6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7) 0 % 31.12.2014 ex29222100 40 7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5) 0 % 31.12.2018 ex29222100 50 Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate, (CAS RN 5460-09-3) 0 % 31.12.2014 ex29222100 60 4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0) 0 % 31.12.2018 ex29222900 20 3-Aminophenol (CAS RN 591-27-5) 0 % 31.12.2018 ex29222900 25 5-Amino-o-cresol (CAS RN 2835-95-2) 0 % 31.12.2018 ex29222900 45 Anisidines 0 % 31.12.2018 ex29222900 55 3-Amino-4-hydroxybenzenesulphonic acid (CAS RN 98-37-3) 0 % 31.12.2014 ex29222900 65 4-Trifluoromethoxyaniline (CAS RN 461-82-5) 0 % 31.12.2014 ex29222900 70 4-Nitro-o-anisidine (CAS RN 97-52-9) 0 % 31.12.2018 ex29222900 75 4-(2-Aminoethyl)phenol (CAS RN 51-67-2) 0 % 31.12.2015 ex29222900 80 3-Diethylaminophenol (CAS RN 91-68-9) 0 % 31.12.2018 ex29222900 85 4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6) 0 % 31.12.2018 ex29223900 10 1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts 0 % 31.12.2018 ex29223900 20 2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) 0 % 31.12.2015 ex29223900 70 p-[(2-Chloroethyl)ethylamino]benzaldehyde (CAS RN 2643-07-4) 0 % 31.12.2016 ex29224300 10 Anthranilic acid (CAS RN 118-92-3) 0 % 31.12.2018 ex29224985 10 Ornithine aspartate (INNM) (CAS RN 3230-94-2) 0 % 31.12.2018 ex29224985 15 DL-Aspartic acid used for the manufacture of food-integrators, (CAS RN 617-45-8) 0 % 31.12.2014 ex29224985 20 3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0) 0 % 31.12.2017 ex29224985 40 Norvaline 0 % 31.12.2018 ex29224985 45 Glycine (CAS RN 56-40-6) 0 % 31.12.2015 ex29224985 50 D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9) 0 % 31.12.2014 ex29224985 60 Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3) 0 % 31.12.2017 ex29224985 70 2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3) 0 % 31.12.2018 ex29225000 20 1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride, (CAS RN 130198-05-9) 0 % 31.12.2014 ex29225000 70 2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate 0 % 31.12.2018 ex29239000 10 Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide 0 % 31.12.2018 ex29239000 25 Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3) 0 % 31.12.2018 ex29239000 45 Tetrabutylammonium hydroxide in the form of an aqueous solution containing 55 % (± 1 %) by weight of tetrabutylammonium hydroxide, (CAS RN 2052-49-5) 0 % 31.12.2014 ex29239000 70 Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: 0 % 31.12.2018 ex29239000 75 Tetraethylammonium hydroxide, in the form of an aqueous solution containing: 0 % 31.12.2015 ex29239000 80 Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride, (CAS RN 7398-69-8) 0 % 31.12.2018 ex29241900 10 2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9) 0 % 31.12.2018 ex29241900 30 Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0) 0 % 31.12.2018 ex29241900 40 N-(1,1-Dimethyl-3-oxobutyl)acrylamide (CAS RN 2873-97-4) 0 % 31.12.2018 ex29241900 50 Acrylamide (CAS RN 79-06-1) 0 % 31.12.2018 ex29241900 60 N,N-Dimethylacrylamide (CAS RN 2680-03-7) 0 % 31.12.2016 ex29241900 70 Methylcarbamate (CAS RN 598-55-0) 0 % 31.12.2018 ex29241900 80 Tetrabutylurea (CAS RN 4559-86-8) 0 % 31.12.2017 ex29242100 10 4,4′-Dihydroxy-7,7′-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts 0 % 31.12.2018 ex29242100 20 (3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9) 0 % 31.12.2018 ex29242998 10 Alachlor (ISO), (CAS RN 15972-60-8) 0 % 31.12.2018 ex29242998 12 4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2) 0 % 31.12.2018 ex29242998 15 Acetochlor (ISO), (CAS RN 34256-82-1) 0 % 31.12.2018 ex29242998 20 2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide, (CAS RN 86763-47-5) 0 % 31.12.2014 ex29242998 27 2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9) 0 % 31.12.2016 ex29242998 40 N,N′-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) 0 % 31.12.2015 ex29242998 45 Propoxur (ISO) (CAS RN 114-26-1) 0 % 31.12.2015 ex29242998 50 N,N′-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 42487-09-2) 0 % 31.12.2015 ex29242998 51 Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4) 0 % 31.12.2017 ex29242998 53 4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) 0 % 31.12.2017 ex29242998 55 N,N′-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 24304-50-5) 0 % 31.12.2015 ex29242998 60 N,N′-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1) 0 % 31.12.2015 ex29242998 63 N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0) 0 % 31.12.2016 ex29242998 65 2-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0) 0 % 31.12.2018 ex29242998 75 3-Amino-p-anisanilide (CAS RN 120-35-4) 0 % 31.12.2018 ex29242998 80 5′-Chloro-3-hydroxy-2′,4′-dimethoxy-2-naphthanilide (CAS RN 92-72-8) 0 % 31.12.2018 ex29242998 85 p-Aminobenzamide (CAS RN 2835-68-9) 0 % 31.12.2018 ex29242998 86 Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6) 0 % 31.12.2017 ex29242998 87 Paracetamol (INN) (CAS RN 103-90-2) 0 % 31.12.2018 ex29242998 88 5′-Chloro-3-hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-63-7) 0 % 31.12.2018 ex29242998 89 Flutolanil (ISO) (CAS RN 66332-96-5) 0 % 31.12.2018 ex29242998 91 3-Hydroxy-2′-methoxy-2-naphthanilide (CAS RN 135-62-6) 0 % 31.12.2018 ex29242998 92 3-Hydroxy-2-naphthanilide (CAS RN 92-77-3) 0 % 31.12.2014 ex29242998 93 3-Hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-61-5) 0 % 31.12.2018 ex29242998 94 2′-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0) 0 % 31.12.2018 ex29242998 97 1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3) 0 % 31.12.2018 ex29251100 20 Saccharin and its sodium salt 0 % 31.12.2018 ex29251995 10 N-Phenylmaleimide (CAS RN 941-69-5) 0 % 31.12.2018 ex29251995 20 4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9) 0 % 31.12.2017 ex29251995 30 N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7) 0 % 31.12.2017 ex29252900 10 Dicyclohexylcarbodiimide (CAS RN 538-75-0) 0 % 31.12.2018 ex29252900 20 N-[3-(Dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8) 0 % 01.01.2018 ex29269095 13 alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9) 0 % 31.12.2018 ex29269095 20 2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0) 0 % 31.12.2014 ex29269095 25 2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2) 0 % 31.12.2016 ex29269095 30 2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanenitrile hydrochloride, (CAS RN 2544-13-0) 0 % 31.12.2015 ex29269095 50 Alkyl or alkoxyalkyl esters of cyanoacetic acid 0 % 31.12.2018 ex29269095 55 Methyl-2-cyano-2-phenylbutyrate (CAS RN 24131-07-5) 0 % 31.12.2016 ex29269095 60 Cyanoacetic acid in crystalline form (CAS RN 372-09-8) 0 % 31.12.2014 ex29269095 61 m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3) 0 % 31.12.2016 ex29269095 63 1-(Cyanoacetyl)-3-ethylurea (CAS RN 41078-06-2) 0 % 31.12.2014 ex29269095 64 Esfenvalerate of a purity by weight of 83 % or more in a mixture of its own isomers (CAS RN 66230-04-4) 0 % 31.12.2014 ex29269095 65 Malononitrile (CAS RN 109-77-3) 0 % 31.12.2018 ex29269095 70 Methacrylonitrile (CAS RN 126-98-7) 0 % 31.12.2014 ex29269095 74 Chlorothalonil (ISO) (CAS RN 1897-45-6) 0 % 31.12.2014 ex29269095 75 Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0) 0 % 31.12.2014 ex29269095 80 Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8) 0 % 31.12.2018 ex29269095 86 Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6) 0 % 31.12.2018 ex29269095 89 Butyronitrile (CAS RN 109-74-0) 0 % 31.12.2018 ex29270000 10 2,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride 0 % 31.12.2018 ex29270000 20 4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2) 0 % 31.12.2018 ex29270000 30 4′-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4) 0 % 31.12.2018 ex29270000 70 Tetrasodium 3,3′-[azoxybis[(2-methoxy-4,1-phenylene)azo]]bis[4,5-dihydroxynaphthalene-2,7-disulphonate], (CAS RN 83968-64-3) 0 % 31.12.2014 ex29270000 80 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7) 0 % 31.12.2017 ex29280090 10 3,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide (CAS RN 32687-78-8) 0 % 31.12.2018 ex29280090 25 Acetaldehyde oxime in an aqueous solution (CAS RN 107-29-9) 0 % 31.12.2015 ex29280090 30 N-Isopropylhydroxylamine (CAS RN 5080-22-8) 0 % 31.12.2016 ex29280090 35 2-Chloro-N-methoxy-N-methylacetamide (CAS RN 67442-07-3) 0 % 31.12.2018 ex29280090 40 O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2) 0 % 31.12.2018 ex29280090 45 Tebufenozide (ISO) (CAS RN 112410-23-8) 0 % 31.12.2018 ex29280090 55 Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1) 0 % 31.12.2018 ex29280090 60 Adipohydrazide (CAS RN 1071-93-8) 0 % 31.12.2018 ex29280090 70 Butanone oxime (CAS RN 96-29-7) 0 % 31.12.2018 ex29280090 75 Metaflumizone (ISO) (CAS RN 139968-49-3) 0 % 31.12.2016 ex29280090 80 Cyflufenamid (ISO) (CAS RN 180409-60-3) 0 % 31.12.2018 ex29280090 85 Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5) 0 % 31.12.2016 ex29291000 10 Methylenedicyclohexyl diisocyanates (CAS RN 28605-81-4) 0 % 31.12.2018 ex29291000 15 3,3′-Dimethylbiphenyl-4,4′-diyl diisocyanate (CAS RN 91-97-4) 0 % 31.12.2014 ex29291000 20 Butyl isocyanate (CAS RN 111-36-4) 0 % 31.12.2017 ex29291000 40 m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7) 0 % 31.12.2018 ex29291000 50 m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9) 0 % 31.12.2018 ex29291000 55 2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) 0 % 31.12.2015 ex29291000 60 Trimethylhexamethylene diisocyanate, mixed isomers 0 % 31.12.2018 ex29291000 80 1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) 0 % 31.12.2016 ex29302000 10 Prosulfocarb (ISO) (CAS RN 52888-80-9) 0 % 31.12.2017 ex29302000 20 2-Isopropylethylthiocarbamate (CAS RN 141-98-0) 0 % 31.12.2016 ex29309099 10 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) 0 % 31.12.2015 ex29309099 13 Mercaptamine hydrochloride (CAS RN 156-57-0) 0 % 31.12.2016 ex29309099 14 4-(Methylthio)benzaldehyde (CAS RN 3446-89-7) 0 % 31.12.2018 ex29309099 15 Ethoprophos (ISO) (CAS RN 13194-48-4) 0 % 31.12.2018 ex29309099 17 2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4) 0 % 31.12.2018 ex29309099 18 1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret (CAS RN 106310-17-2) 0 % 31.12.2016 ex29309099 20 2-Methoxy-N-[2-nitro-5-(phenylthio)phenyl]acetamide (CAS RN 63470-85-9) 0 % 31.12.2015 ex29309099 23 Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8) 0 % 31.12.2018 ex29309099 25 Thiophanate-methyl (ISO), (CAS RN 23564-05-8) 0 % 31.12.2018 ex29309099 30 4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6) 0 % 31.12.2018 ex29309099 35 Glutathione (CAS RN 70-18-8) 0 % 31.12.2016 ex29309099 40 3,3′-Thiodi(propionic acid) (CAS RN 111-17-1) 0 % 31.12.2018 ex29309099 45 2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5) 0 % 31.12.2018 ex29309099 50 [S-(R*,R*)]-2-Amino-1-[4-(methylthio)-phenyl]-1,3-propanediol, (CAS RN 23150-35-8) 0 % 31.12.2015 ex29309099 55 Thiourea (CAS RN 62-56-6) 0 % 31.12.2015 ex29309099 60 Methyl phenyl sulphide (CAS RN 100-68-5) 0 % 31.12.2018 ex29309099 62 Zinc bis(benzenesulfinate) (CAS RN 24308-84-7) 0 % 31.12.2014 ex29309099 64 3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2) 0 % 31.12.2014 ex29309099 65 Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7) 0 % 31.12.2015 ex29309099 66 Diphenyl sulphide (CAS RN 139-66-2) 0 % 31.12.2017 ex29309099 67 3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2) 0 % 31.12.2018 ex29309099 68 Clethodim (ISO) (CAS RN 99129-21-2) 0 % 31.12.2017 ex29309099 77 4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7) 0 % 31.12.2018 ex29309099 78 4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6) 0 % 31.12.2016 ex29309099 80 Captan (ISO) (CAS RN 133-06-2) 0 % 31.12.2018 ex29309099 81 Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3) 3 % 31.12.2014 ex29309099 83 Methyl-p-tolyl sulphone (CAS RN 3185-99-7) 0 % 31.12.2017 ex29309099 84 2-Chloro-4-(methylsulphonyl)benzoic acid (CAS RN 53250-83-2) 0 % 31.12.2014 ex29309099 87 3-Sulphinobenzoic acid (CAS RN 15451-00-0) 0 % 31.12.2018 ex29309099 89 Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates 0 % 31.12.2016 ex29319090 05 Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane 0 % 31.12.2018 ex29319090 10 Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN 0 % 31.12.2015 ex29319090 14 Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution 0 % 31.12.2017 ex29319090 15 Triethylborane (CAS RN 97-94-9) 0 % 31.12.2015 ex29319090 18 Trioctylphosphine oxide (CAS RN 78-50-2) 0 % 31.12.2016 ex29319090 20 Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl, (CAS RN 12108-13-3) 0 % 31.12.2014 ex29319090 24 Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5) 0 % 31.12.2014 ex29319090 30 Diethylborane isopropoxide (CAS RN 74953-03-0) 0 % 31.12.2015 ex29319090 35 (Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) 0 % 31.12.2017 ex29319090 40 N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) 0 % 31.12.2014 ex29319090 50 Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6) 0 % 31.12.2018 ex29319090 55 Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7) 0 % 31.12.2014 ex29319090 70 N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3) 0 % 31.12.2014 ex29319090 72 Phenylphosphonic dichloride (CAS RN 824-72-6) 0 % 31.12.2016 ex29319090 75 Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1) 0 % 31.12.2016 ex29319090 86 Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane 0 % 31.12.2018 ex29319090 87 Tris(4-methylpentan-2-oximino)methylsilane (CAS RN 37859-57-7) 0 % 31.12.2018 ex29319090 89 Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4) 0 % 31.12.2014 ex29319090 91 Trimethylsilane (CAS RN 993-07-7) 0 % 31.12.2016 ex29319090 92 Trimethylborane (CAS RN 593-90-8) 0 % 31.12.2014 ex29319090 96 3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8) 0 % 31.12.2018 ex29321300 10 Tetrahydrofurfuryl alcohol (CAS RN 97-99-4) 0 % 31.12.2018 ex29321900 40 Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more 0 % 31.12.2014 ex29321900 41 2,2 di(tetrahydrofuryl)propane (CAS RN 89686-69-1) 0 % 31.12.2014 ex29321900 45 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside, (CAS RN 56038-13-2) 0 % 31.12.2014 ex29321900 50 2-Methylfuran (CAS RN 534-22-5) 0 % 31.12.2015 ex29321900 70 Furfurylamine (CAS RN 617-89-0) 0 % 31.12.2014 ex29321900 75 Tetrahydro-2-methylfuran (CAS RN 96-47-9) 0 % 31.12.2018 ex29321900 80 5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7) 0 % 31.12.2016 ex29322090 10 2′-Anilino-6′-[ethyl(isopentyl)amino]-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 70516-41-5) 0 % 31.12.2018 ex29322090 15 Coumarin (CAS RN 91-64-5) 0 % 31.12.2016 ex29322090 20 Ethyl 6′-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9′-xanthene]-2′-carboxylate (CAS RN 154306-60-2) 0 % 31.12.2017 ex29322090 35 6′-Diethylamino-3′-methyl-2′-(2,4-xylidino)spiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 36431-22-8) 0 % 31.12.2018 ex29322090 40 (S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9) 0 % 31.12.2017 ex29322090 55 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7) 0 % 31.12.2018 ex29322090 60 6′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 29512-49-0) 0 % 31.12.2016 ex29322090 70 3′,6′-Bis(ethylamino)-2′,7′-dimethylspiro[isobenzofuran-1(3H),9′-[9H]-xanthen]-3-one, (CAS RN 41382-37-0) 0 % 31.12.2018 ex29322090 71 6′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 89331-94-2) 0 % 31.12.2016 ex29322090 72 2′-[Bis(phenylmethyl)amino]-6′-(diethylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 34372-72-0) 0 % 31.12.2016 ex29322090 80 Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5) 0 % 31.12.2018 ex29322090 84 Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5) 0 % 31.12.2018 ex29329900 10 Bendiocarb (ISO) (CAS RN 22781-23-3) 0 % 31.12.2018 ex29329900 15 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5) 0 % 31.12.2016 ex29329900 20 Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1) 0 % 31.12.2016 ex29329900 25 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) 0 % 31.12.2017 ex29329900 35 1,2,3-Trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol, (CAS RN 882073-43-0) 0 % 31.12.2018 ex29329900 40 1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2) 0 % 31.12.2018 ex29329900 45 2-Butylbenzofuran (CAS RN 4265-27-4) 0 % 31.12.2018 ex29329900 50 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) 0 % 31.12.2015 ex29329900 55 6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7) 0 % 31.12.2018 ex29329900 70 1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9) 0 % 31.12.2016 ex29329900 75 3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0) 0 % 31.12.2016 ex29329900 80 1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 32647-67-9) 0 % 31.12.2016 ex29331990 30 3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0) 0 % 31.12.2018 ex29331990 40 Edaravone (INN) (CAS RN 89-25-8) 0 % 31.12.2018 ex29331990 50 Fenpyroximate (ISO) (CAS RN 134098-61-6) 0 % 31.12.2014 ex29331990 60 Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9) 0 % 31.12.2014 ex29331990 70 4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2) 0 % 31.12.2018 ex29331990 80 3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5) 0 % 31.12.2017 ex29331990 85 Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioate (CAS RN 473799-16-5) 0 % 31.12.2017 ex29332100 50 1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) 0 % 31.12.2016 ex29332100 60 DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9) 0 % 31.12.2016 ex29332100 70 α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide, (CAS RN 70950-45-7) 0 % 31.12.2016 ex29332100 80 5,5-Dimethylhydantoin (CAS RN 77-71-4) 0 % 31.12.2015 ex29332990 15 Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0) 0 % 31.12.2018 ex29332990 25 Prochloraz (ISO) (CAS RN 67747-09-5) 0 % 31.12.2018 ex29332990 35 1-Trityl-4-formylimidazole (CAS RN 33016-47-6) 0 % 31.12.2018 ex29332990 40 Triflumizole (ISO) (CAS RN 68694-11-1) 0 % 31.12.2014 ex29332990 45 Prochloraz copper chloride (ISO) (CAS RN 156065-03-1) 0 % 31.12.2018 ex29332990 50 1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9) 0 % 31.12.2018 ex29332990 60 1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2) 0 % 31.12.2016 ex29332990 70 Cyazofamid (ISO) (CAS RN 120116-88-3) 0 % 31.12.2016 ex29332990 80 Imazalil (ISO) (CAS RN 35554-44-0) 0 % 31.12.2017 ex29333999 12 2,3-Dichloropyridine (CAS RN 2402-77-9) 0 % 31.12.2017 ex29333999 15 Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9) 0 % 31.12.2018 ex29333999 18 6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0) 0 % 31.12.2017 ex29333999 20 Copper pyrithione powder (CAS RN 14915-37-8) 0 % 31.12.2014 ex29333999 24 2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3) 0 % 31.12.2014 ex29333999 25 Imazethapyr (ISO) (CAS RN 81335-77-5) 0 % 31.12.2018 ex29333999 30 Fluazinam (ISO) (CAS RN 79622-59-6) 0 % 31.12.2014 ex29333999 32 2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2) 0 % 31.12.2016 ex29333999 35 Aminopyralid (ISO) (CAS RN 150114-71-9) 0 % 31.12.2018 ex29333999 37 Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2) 0 % 31.12.2016 ex29333999 40 2-Chloropyridine (CAS RN 109-09-1) 0 % 31.12.2018 ex29333999 42 2,2,6,6-Tetramethylpiperidine (CAS RN 768-66-1) 0 % 31.12.2016 ex29333999 45 5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole, (CAS RN 102625-64-9) 0 % 31.12.2014 ex29333999 47 (-)-trans-4-(4′-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5) 0 % 31.12.2014 ex29333999 48 Flonicamid (ISO) (CAS RN 158062-67-0) 0 % 31.12.2014 ex29333999 49 2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzimidazole, (CAS RN 103577-40-8) 0 % 31.12.2015 ex29333999 50 N-Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8) 0 % 31.12.2016 ex29333999 53 3-Bromopyridine (CAS RN 626-55-1) 0 % 31.12.2018 ex29333999 55 Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1) 0 % 31.12.2014 ex29333999 57 Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) 0 % 31.12.2017 ex29333999 60 2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0) 0 % 31.12.2018 ex29333999 63 2-Aminomethyl-3-chloro-5-trifluoromethylpyridine hydrochloride (CAS RN 326476-49-7) 0 % 31.12.2018 ex29333999 65 Acetamiprid (ISO) (CAS RN 135410-20-7) 0 % 31.12.2018 ex29333999 67 (1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2) 0 % 31.12.2018 ex29333999 70 2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7) 0 % 31.12.2016 ex29333999 72 5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4) 0 % 31.12.2016 ex29333999 77 Imazamox (ISO) (CAS RN 114311-32-9) 0 % 31.12.2018 ex29333999 85 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) 0 % 31.12.2015 ex29334910 10 Quinmerac (ISO) (CAS RN 90717-03-6) 0 % 31.12.2018 ex29334910 20 3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7) 0 % 31.12.2018 ex29334910 30 Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6) 0 % 31.12.2017 ex29334990 30 Quinoline (CAS RN 91-22-5) 0 % 31.12.2015 ex29334990 40 Isoquinoline (CAS RN 119-65-3) 0 % 31.12.2015 ex29334990 60 5,6,7,8-Tetrahydroquinoline (CAS RN 10500-57-9) 0 % 31.12.2014 ex29334990 70 Quinolin-8-ol (CAS RN 148-24-3) 0 % 31.12.2018 ex29335200 10 Malonylurea (barbituric acid) (CAS RN 67-52-7) 0 % 31.12.2016 ex29335995 15 Sitagliptin phosphate monohydrate (CAS RN 654671-77-9) 0 % 01.07.2014 ex29335995 17 N,N′-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6) 0 % 31.12.2018 ex29335995 20 2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2) 0 % 31.12.2018 ex29335995 23 6-Chloro-3-methyluracil (CAS RN 4318-56-3) 0 % 31.12.2018 ex29335995 27 2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8) 0 % 31.12.2018 ex29335995 30 Mepanipyrim (ISO) (CAS RN 110235-47-7) 0 % 31.12.2018 ex29335995 45 1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1) 0 % 31.12.2014 ex29335995 50 2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1) 0 % 31.12.2014 ex29335995 55 Thiopental (INNM) (CAS RN 76-75-5) 0 % 31.12.2014 ex29335995 60 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8) 0 % 31.12.2018 ex29335995 65 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate), (CAS RN 140681-55-6) 0 % 31.12.2014 ex29335995 70 N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9) 0 % 31.12.2018 ex29335995 72 Triacetylganciclovir (CAS RN 86357-14-4) 0 % 31.12.2016 ex29335995 75 (2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8) 0 % 31.12.2014 ex29335995 77 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6) 0 % 31.12.2017 ex29336980 25 1,3,5-Triazine-2,4,6-triamine monophosphate (CAS RN 20208-95-1) 0 % 31.12.2016 ex29336980 40 Troclosene sodium (INNM) (CAS RN 2893-78-9) 0 % 31.12.2016 ex29336980 50 1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9) 0 % 31.12.2018 ex29336980 55 Terbutryn (ISO) (CAS RN 886-50-0) 0 % 31.12.2015 ex29336980 60 Cyanuric acid (CAS RN 108-80-5) 0 % 31.12.2015 ex29336980 80 Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7) 0 % 31.12.2018 ex29337900 30 5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0) 0 % 31.12.2017 ex29337900 50 6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6) 0 % 31.12.2018 ex29337900 60 3,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9) 0 % 31.12.2014 ex29337900 70 (S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2) 0 % 31.12.2015 ex29339980 10 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7) 0 % 31.12.2018 ex29339980 13 5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7) 0 % 31.12.2016 ex29339980 15 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1) 0 % 31.12.2018 ex29339980 18 4,4′-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4) 0 % 31.12.2017 ex29339980 20 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7) 0 % 31.12.2018 ex29339980 22 (2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) 0 % 31.12.2017 ex29339980 24 1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3) 0 % 31.12.2017 ex29339980 28 N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8) 0 % 31.12.2017 ex29339980 30 Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3) 0 % 31.12.2018 ex29339980 32 5-[4′-(Bromomethyl)biphenyl-2-yl]-2-trityl-2H-tetrazole (CAS RN 133051-88-4) 0 % 31.12.2014 ex29339980 35 1,3,3-Trimethyl-2-methyleneindoline (CAS RN 118-12-7) 0 % 31.12.2014 ex29339980 37 8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1) 0 % 31.12.2014 ex29339980 40 trans-4-Hydroxy-L-proline (CAS RN 51-35-4) 0 % 31.12.2018 ex29339980 43 2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7) 0 % 31.12.2017 ex29339980 45 Maleic hydrazide (ISO) (CAS RN 123-33-1) 0 % 31.12.2018 ex29339980 47 Paclobutrazol (ISO) (CAS RN 76738-62-0) 0 % 31.12.2017 ex29339980 50 Metconazole (ISO) (CAS RN 125116-23-6) 3,2 % 31.12.2018 ex29339980 53 Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) 0 % 31.12.2018 ex29339980 55 Pyridaben (ISO) (CAS RN 96489-71-3) 0 % 31.12.2014 ex29339980 57 2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1) 0 % 31.12.2018 ex29339980 62 1H-Indole-6-carboxylic acid (CAS RN 1670-82-2) 0 % 31.12.2018 ex29339980 64 ((3R)-1-{(1R,2R)-2-[2-(3,4-Dimethoxyphenyl) ethoxy]cyclohexyl}pyrrolidin-3-ol.hydrochloride, (CAS RN 748810-28-8) 0 % 31.12.2015 ex29339980 67 Candesartan ethyl ester (INNM) (CAS RN 139481-58-6) 0 % 31.12.2016 ex29339980 71 10-Methoxyiminostilbene (CAS RN 4698-11-7) 0 % 31.12.2018 ex29339980 72 1,4,7-Trimethyl-1,4,7-Triazacyclononane 0 % 31.12.2018 ex29339980 74 Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2) 0 % 31.12.2018 ex29339980 76 Manganese(2+), bis(octahydro-1,4,7-trimethyl-1H-1,4,7-triazonine-N1,N4,N7)tri-μ-oxodi-, acetate (1:2) (CAS RN 916075-10-0) 0 % 31.12.2014 ex29339980 78 3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7) 0 % 31.12.2018 ex29339980 81 1,2,3-Benzotriazole (CAS RN 95-14-7) 0 % 31.12.2016 ex29339980 82 Tolytriazole (CAS RN 29385-43-1) 0 % 31.12.2018 ex29339980 88 2,6-Dichloroquinoxaline (CAS RN 18671-97-1) 0 % 31.12.2014 ex29339980 89 Carbendazim (ISO) (CAS RN 10605-21-7) 0 % 31.12.2018 ex29341000 10 Hexythiazox (ISO) (CAS RN 78587-05-0) 0 % 31.12.2018 ex29341000 15 4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3) 0 % 31.12.2017 ex29341000 20 2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8) 0 % 31.12.2018 ex29341000 25 (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3) 0 % 31.12.2017 ex29341000 35 (2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8) 0 % 31.12.2017 ex29341000 40 (Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7) 0 % 31.12.2018 ex29341000 60 Fosthiazate (ISO) (CAS RN 98886-44-3) 0 % 31.12.2014 ex29341000 70 2-(Formylamino)-4-thiazoleacetyl chloride, hydrochloride (CAS RN 372092-18-7) 0 % 31.12.2016 ex29341000 80 3,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0) 0 % 31.12.2016 ex29342080 20 S-1,3-Benzothiazol-2-yl (2Z)-(5-amino-1,2,4-thiadiazol-3-yl)(methoxyimino)ethanethioate (CAS RN 89604-91-1) 0 % 31.12.2016 ex29342080 30 2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1) 0 % 31.12.2016 ex29342080 40 1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5) 0 % 31.12.2017 ex29342080 50 S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9) 0 % 31.12.2018 ex29342080 60 Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3) 0 % 31.12.2015 ex29342080 70 N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) 0 % 31.12.2015 ex29343090 10 2-Methylthiophenothiazine (CAS RN 7643-08-5) 0 % 31.12.2017 ex29349990 11 Methyl 3-{1,4-dioxaspiro[4.5]dec-8-yl[(trans-4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene-2-carboxylate (CAS RN 1026785-65-8) 0 % 31.12.2018 ex29349990 12 Dimethomorph (ISO) (CAS RN 110488-70-5) 0 % 31.12.2018 ex29349990 13 Buprofezin (ISO) of a purity by weight of 98,5 % or more (CAS RN 953030-84-7) 0 % 31.12.2018 ex29349990 14 Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2) 0 % 31.12.2017 ex29349990 15 Carboxin (ISO) (CAS RN 5234-68-4) 0 % 31.12.2018 ex29349990 17 Methyl(1,8-diethyl-1,3,4,9-tetrahydropyrano[3,4-b]indol-1-yl)acetate (CAS RN 122188-02-7) 0 % 31.12.2016 ex29349990 18 3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) 0 % 31.12.2017 ex29349990 20 Thiophene (CAS RN 110-02-1) 0 % 31.12.2014 ex29349990 22 7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1) 0 % 31.12.2017 ex29349990 23 Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2) 0 % 31.12.2016 ex29349990 25 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) 0 % 31.12.2015 ex29349990 28 11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4) 0 % 31.12.2016 ex29349990 30 Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7) 0 % 31.12.2014 ex29349990 33 [2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) 0 % 31.12.2016 ex29349990 35 Dimethenamide (ISO) (CAS RN 87674-68-8) 0 % 31.12.2018 ex29349990 37 4-Propan-2-ylmorpholine (CAS RN 1004-14-4) 0 % 31.12.2017 ex29349990 40 2-Thiophene ethylamine (CAS RN 30433-91-1) 0 % 31.12.2015 ex29349990 43 Clopidogrel acid hydrochloride (CAS RN 144750-42-5) 0 % 31.12.2016 ex29349990 45 Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione (CAS RN 2451-62-9) 0 % 31.12.2018 ex29349990 48 Propan-2-ol – 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9) 0 % 31.12.2016 ex29349990 50 10-[1,1′-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1) 0 % 31.12.2015 ex29349990 55 Olmesartan medoxomil (INN) (CAS RN 144689-63-4) 0 % 31.12.2018 ex29349990 60 DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3) 0 % 31.12.2018 ex29349990 66 Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0) 0 % 31.12.2018 ex29349990 72 1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4) 0 % 31.12.2018 ex29349990 74 2-Isopropylthioxanthone (CAS RN 5495-84-1) 0 % 31.12.2017 ex29349990 75 (4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1) 0 % 31.12.2016 ex29349990 ex32042000 76 10 2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5) 0 % 31.12.2016 ex29349990 77 Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate (CAS RN 888504-28-7) 0 % 31.12.2016 ex29349990 79 Thiophen-2-ethanol (CAS RN 5402-55-1) 0 % 31.12.2018 ex29349990 83 Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7) 0 % 31.12.2014 ex29349990 84 Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1) 0 % 31.12.2014 ex29349990 85 N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride (CAS RN 126586-91-2) 0 % 31.12.2015 ex29349990 86 Dithianon (ISO) (CAS RN 3347-22-6) 0 % 31.12.2015 ex29349990 87 2,2′-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) 0 % 31.12.2015 ex29350090 15 Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5) 0 % 31.12.2018 ex29350090 17 6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1) 0 % 31.12.2018 ex29350090 20 Toluenesulphonamides 0 % 31.12.2018 ex29350090 23 N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4) 0 % 31.12.2016 ex29350090 25 Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7) 0 % 31.12.2018 ex29350090 27 Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9) 0 % 31.12.2016 ex29350090 28 N-Fluorobenzenesulphonimide (CAS RN 133745-75-2) 0 % 31.12.2018 ex29350090 30 Mixture of isomers consisting of N-ethyltoluene-2-sulphonamide and N-ethyltoluene-4-sulphonamide 0 % 31.12.2014 ex29350090 35 Chlorsulfuron (ISO) (CAS RN 64902-72-3) 0 % 31.12.2018 ex29350090 40 Imazosulfuron (ISO), of a purity by weight of 98 % or more (CAS RN 122548-33-8) 0 % 31.12.2015 ex29350090 42 Penoxsulam (ISO) (CAS RN 219714-96-2) 0 % 31.12.2015 ex29350090 45 Rimsulfuron (ISO) (CAS RN 122931-48-0) 0 % 31.12.2018 ex29350090 48 (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid – 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4) 0 % 31.12.2016 ex29350090 50 4,4′-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3) 0 % 31.12.2018 ex29350090 53 2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4) 0 % 31.12.2014 ex29350090 55 Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3) 0 % 31.12.2018 ex29350090 63 Nicosulphuron (ISO), of a purity by weight of 91 % or more (CAS RN 111991-09-4) 0 % 31.12.2014 ex29350090 65 Tribenuron-methyl (ISO) (CAS RN 101200-48-0) 0 % 31.12.2018 ex29350090 75 Metsulfuron-methyl (ISO) (CAS RN 74223-64-6) 0 % 31.12.2018 ex29350090 77 [[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7) 0 % 31.12.2014 ex29350090 82 N-(5,7-Dimethoxy[1,2,4]triazolo[1,5-a]pyrimidin-2-yl)-2-methoxy-4-(trifluoromethyl)pyridine-3-sulphonamide, (CAS RN 422556-08-9) 0 % 31.12.2014 ex29350090 85 N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride 0 % 31.12.2018 ex29350090 88 N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate, (CAS RN 25646-71-3) 0 % 31.12.2018 ex29350090 89 3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0) 0 % 31.12.2016 ex29389030 10 Ammonium glycyrrhizate (CAS RN 53956-04-0) 0 % 31.12.2015 ex29389090 10 Hesperidin (CAS RN 520-26-3) 0 % 31.12.2018 ex29389090 20 Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0) 0 % 31.12.2018 ex29412030 10 Dihydrostreptomycin sulphate (CAS RN 5490-27-7) 0 % 31.12.2016 ex31025000 10 Natural sodium nitrate 0 % 31.12.2017 32012000 Wattle extract 0 % 31.12.2018 ex32019090 20 Tanning extracts derived from gambier and myrobalan fruits 0 % 31.12.2018 ex32041100 20 Dye C.I. Disperse Yellow 241 (CAS RN 83249-52-9), with a purity of 97 % or more as determined by high pressure liquid chromatography 0 % 31.12.2015 ex32041100 30 Preparation of dispersion dyes, containing: 0 % 31.12.2015 ex32041100 40 Dye C.I. Disperse Red 60 (CAS RN 17418-58-5) 0 % 31.12.2016 ex32041100 50 Dye C.I. Disperse Blue 72 (CAS RN 81-48-1) 0 % 31.12.2016 ex32041100 60 Dye C.I. Disperse Blue 359 (CAS RN 213328-78-0) 0 % 31.12.2016 ex32041100 70 Dye C.I. Disperse Red 343 (CAS RN 99035-78-6) 0 % 31.12.2017 ex32041100 80 Dye preparation, non-ionogenic, containing: 0 % 31.12.2017 ex32041200 10 Dye C.I. Acid Blue 9 (CAS RN 3844-45-9) 0 % 31.12.2016 ex32041200 20 Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0) 0 % 31.12.2017 ex32041200 30 Acid dye preparation, anionic, containing: 0 % 31.12.2017 ex32041200 40 Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0) 0 % 31.12.2018 ex32041300 10 Dye C.I. Basic Red 1 (CAS RN 989-38-8) 0 % 31.12.2016 ex32041300 20 (2,2′-(3,3′-Dioxidobiphenyl-4,4′-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1) 0 % 31.12.2017 ex32041300 30 Dye C.I. Basic Blue 7 (CAS RN 2390-60-5) 0 % 31.12.2017 ex32041300 40 Dye C.I. Basic Violet 1 (CAS RN 603-47-4)/(CAS RN 8004-87-3) 0 % 31.12.2017 ex32041500 10 Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43) (CAS RN 4424-06-0) 0 % 31.12.2017 ex32041500 60 Dyestuff C.I. Vat Blue 4 (CAS RN 81-77-6) 0 % 31.12.2018 ex32041700 10 Dye C.I. Pigment Yellow 81 (CAS RN 22094-93-5) 0 % 31.12.2018 ex32041700 15 Dye C.I. Pigment Green 7 (CAS RN 1328-53-6) 0 % 31.12.2016 ex32041700 20 Dye C.I. Pigment Blue 15:3 (CAS RN 147-14-8) 0 % 31.12.2016 ex32041700 25 Dye C.I. Pigment Yellow 14 (CAS RN 5468-75-7) 0 % 31.12.2016 ex32041700 30 Dye C.I. Pigment Yellow 97 (CAS RN 12225-18-2) 0 % 31.12.2017 ex32041700 35 Dye C.I. Pigment Red 202 (CAS RN 3089-17-6) 0 % 31.12.2016 ex32041700 40 Dye C.I. Pigment Yellow 120 (CAS RN 29920-31-8) 0 % 31.12.2014 ex32041700 50 Dye C.I. Pigment Yellow 180 (CAS RN 77804-81-0) 0 % 31.12.2014 ex32041700 60 Dye C.I. Pigment Red 53:1 (CAS RN 5160-02-1) 0 % 31.12.2016 ex32041700 65 Dye C.I. Pigment Red 53 (CAS RN 2092-56-0) 0 % 31.12.2016 ex32041700 70 Dye C.I. Pigment Yellow 13 (CAS RN 5102-83-0) 0 % 31.12.2016 ex32041700 75 Dye C.I. Pigment Orange 5 (CAS RN 3468-63-1) 0 % 31.12.2017 ex32041700 80 Dye C.I. Pigment Red 207 (CAS RN 71819-77-7) 0 % 31.12.2017 ex32041700 85 Dye C.I. Pigment Blue 61 (CAS RN 1324-76-1) 0 % 31.12.2017 ex32041700 88 Dye C.I. Pigment Violet 3 (CAS RN 1325-82-2) 0 % 31.12.2017 ex32041900 11 Photochromic dye, 3-(4-butoxyphenyl-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile 0 % 31.12.2014 ex32041900 21 Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6) 0 % 31.12.2014 ex32041900 31 Photochromic dye, N-hexyl -6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carboxamide 0 % 31.12.2014 ex32041900 41 Photochromic dye, 4,4′-(13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-3,3-diyl)diphenol 0 % 31.12.2014 ex32041900 43 Photochromic dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2) 0 % 31.12.2018 ex32041900 47 Photochromic dye, 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl)morpholine (CUS 0133726-4) 0 % 31.12.2018 ex32041900 51 Photochromic dye, 4-(4-(6,11-difluoro-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f ]chromen-3-yl)phenyl)morpholine (CAS RN 1360882-72-6) 0 % 31.12.2014 ex32041900 53 Photochromic dye, 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3) 0 % 31.12.2018 ex32041900 55 Photochromic dye, 4, 4′-(7-methoxy-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2, 1-f]chromene-3, 3-diyl)diphenol (CUS 0133728-6) 0 % 31.12.2018 ex32041900 57 Photochromic dye, bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate (CUS 0133729-7) 0 % 31.12.2018 ex32041900 61 Photochromic dye, 3-(4-butoxyphenyl)-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f ]chromene (CAS RN 1021540-61-3) 0 % 31.12.2014 ex32041900 63 Photochromic dye, 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine (CUS 0133727-5) 0 % 31.12.2018 ex32041900 70 Dye C.I. Solvent Red 49 (CAS RN 509-34-2) 0 % 31.12.2018 ex32041900 71 Dye C.I. Solvent Brown 53 (CAS RN 64696-98-6) 0 % 31.12.2015 ex32041900 73 Dye C.I. Solvent Blue 104 (CAS RN 116-75-6) with a purity of 97 % or more determined by high pressure liquid chromatography 0 % 31.12.2015 ex32041900 77 Dye C.I. Solvent Yellow 98 (CAS RN 27870-92-4) 0 % 31.12.2016 ex32041900 84 Dye C.I. Solvent Blue 67 (CAS RN 12226-78-7) 0 % 31.12.2017 ex32041900 85 Dye C.I. Solvent Red HPR 0 % 31.12.2017 ex32042000 20 Dye C.I. Fluorescent Brightener 71 (CAS RN 16090-02-1) 0 % 31.12.2016 ex32042000 30 Dye C.I. Fluorescent Brightener 351 (CAS RN 38775-22-3) 0 % 31.12.2016 ex32042000 40 Disodium 5-[[4-anilino-6-[2-hydroxyethyl(methyl)amino]-1,3,5-triazin-2-yl]amino]-2-[(E)-2-[4-[[4-anilino-6-[2-hydroxyethyl(methyl)amino]-1,3,5-triazin-2-yl]amino]-2-sulfonatophenyl]ethenyl]benzenesulphonate (CAS RN 13863-31-5) 0 % 31.12.2018 ex32050000 10 Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry 0 % 31.12.2018 ex32050000 20 Dye C.I. Carbon Black 7 Lake 0 % 31.12.2016 ex32061100 10 Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate 0 % 31.12.2018 ex32061900 10 Preparation containing by weight: 0 % 31.12.2016 ex32064200 10 Lithopone (CAS RN 1345-05-7) 0 % 31.12.2018 32065000 Inorganic products of a kind used as luminophores 0 % 31.12.2018 ex32073000 10 Preparation containing: used for screen printing in the manufacture of multilayer ceramic capacitors 0 % 31.12.2018 ex32074085 20 Glass flakes coated with silver, of an average diameter of 40 (± 10) μm 0 % 31.12.2018 ex32074085 40 Glass flakes (CAS RN 65997-17-3): 0 % 31.12.2017 ex32081090 ex37079090 10 60 Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer 0 % 31.12.2018 ex32082010 10 Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer 0 % 31.12.2018 ex32082010 20 Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether 0 % 31.12.2018 ex32089019 10 Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol 0 % 31.12.2018 ex32089019 ex39029090 15 94 Modified, chlorinated polyolefins, whether or not in a solution or dispersion 0 % 31.12.2018 ex32089019 ex32089091 25 20 Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight 0 % 31.12.2017 ex32089019 35 Silicones containing 50 % by weight or more of xylene of a kind used for the manufacture of long term surgical implants 0 % 31.12.2018 ex32089019 40 Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane 0 % 31.12.2018 ex32089019 50 Solution containing by weight: 0 % 31.12.2018 ex32089019 60 Copolymer of hydroxystyrene with one or more of the following: dissolved in ethyl lactate 0 % 31.12.2016 ex32089019 75 Acenaphthalene copolymer in ethyl lactate solution 0 % 31.12.2017 ex32089099 10 Solution based on chemically modified natural polymers, containing two or more of the following dyes: 0 % 31.12.2018 ex32151100 ex32151900 10 10 Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments 0 % 31.12.2018 ex32151900 20 Ink: used to imprint electrodes 0 % 31.12.2017 ex32159000 10 Ink formulation, for use in the manufacture of ink-jet cartridges 0 % 31.12.2018 ex32159000 20 Heat sensitive ink fixed on a plastic film 0 % 31.12.2018 ex32159000 30 Disposable cartridge ink, containing by weight: for use in the marking of integrated circuits 0 % 31.12.2018 ex32159000 40 Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with: for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices 0 % 31.12.2015 33011210 Essential oil of orange, not deterpenated 0 % 31.12.2018 ex34021190 10 Sodium lauroyl methyl isethionate 0 % 31.12.2015 ex34021300 10 Vinyl copolymer surface active agent based on polypropylene glycol 0 % 31.12.2018 ex34021300 20 Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated 0 % 31.12.2017 ex34021300 30 Polyoxyethylated-12-hydroxystearic acid (CAS RN 70142–34–6) 0 % 31.12.2018 ex34029010 20 Mixture of docusate sodium (INN) and sodium benzoate 0 % 31.12.2018 ex34029010 30 Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1) 0 % 31.12.2015 ex34029010 50 Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol) 0 % 31.12.2015 ex34029010 60 Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane 0 % 31.12.2014 ex34029010 70 Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1) 0 % 31.12.2014 ex34039900 10 Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides 0 % 31.12.2018 ex35040090 10 Avidin (CAS RN 1405-69-2) 0 % 31.12.2014 ex35051050 20 O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch (CAS RN 9005-27-0) 0 % 31.12.2018 ex35069100 10 Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) 0 % 31.12.2018 ex35069100 30 Two component microencapsulated epoxy adhesive dispersed in a solvent 0 % 31.12.2018 ex35069100 40 Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330) 0 % 31.12.2014 ex36010000 10 Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators 0 % 31.12.2016 ex37013000 10 Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm 0 % 31.12.2018 ex37013000 20 Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm 0 % 31.12.2014 ex37019900 10 Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, ofa kind used forgoods of heading 8541 or 8542 0 % 01.07.2014 ex37059090 10 Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers 0 % 31.12.2014 ex37071000 10 Photosensitive emulsion for the sensitization of silicon discs 0 % 31.12.2018 ex37071000 15 Sensitising emulsion consisting of: in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone 0 % 31.12.2018 ex37071000 25 Sensitising emulsion containing: in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate 0 % 31.12.2018 ex37071000 30 Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate 0 % 31.12.2018 ex37071000 ex37079090 35 70 Sensitising emulsion or preparation containing one or more of: containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate 0 % 31.12.2016 ex37071000 40 Sensitising emulsion, containing: dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate 0 % 31.12.2016 ex37071000 45 Photosensitive emulsion consisting of cyclized polyisoprene containing: 0 % 31.12.2014 ex37071000 50 Photosensitive emulsion containing by weight: 0 % 31.12.2014 ex37071000 55 Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidon with a polymer content by weight 10 % or more 0 % 31.12.2018 ex37079020 10 Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % 31.12.2018 ex37079020 20 Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % 31.12.2018 ex37079020 40 Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % 31.12.2018 ex37079020 50 Dry ink powder or toner blend, consisting of: for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers 0 % 31.12.2017 ex37079090 10 Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in a solution in two or three of the following substances: 0 % 31.12.2018 ex37079090 40 Anti-reflection coating, in the form of an aqueous solution, containing by weight not more than: 0 % 31.12.2014 ex37079090 80 Anti-reflection coating, consisting of either a siloxane polymer or an organic polymer having a phenolic hydroxy group modified with a chromophore group, in the form of a solution of an organic solvent containing either 1-ethoxy-2-propanol or 2-methoxy-1-methylethyl acetate containing by weight not more than 10 % of polymer 0 % 31.12.2015 ex37079090 85 Rolls, containing: 0 % 31.12.2014 ex38019000 10 Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6) 0 % 31.12.2016 ex38029000 11 Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products 0 % 31.12.2017 38059010 Pine oil 1,7 % 31.12.2018 ex38061000 ex39094000 20 50 Rosin modified phenolic resin, of a kind used in offset printing 0 % 31.12.2016 ex38089190 10 Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide 0 % 31.12.2018 ex38089190 30 Preparation containing endospores or spores and protein crystals derived from either: 0 % 31.12.2014 ex38089190 40 Spinosad (ISO) 0 % 31.12.2018 ex38089190 60 Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L) 0 % 31.12.2017 ex38089290 10 Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale 0 % 31.12.2018 ex38089290 30 Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight: 0 % 31.12.2018 ex38089290 50 Preparations based on copper pyrithione (CAS RN 14915-37-8) 0 % 31.12.2014 ex38089315 10 Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension 0 % 31.12.2017 ex38089323 10 Herbicide containing flazasulfuron (ISO) as an active ingredient 0 % 31.12.2014 ex38089327 40 Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight: 0 % 31.12.2016 ex38089390 10 Preparation, in the form of granules, containing by weight: 0 % 31.12.2014 ex38089390 20 Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight: of a kind used in plant growth regulators 0 % 31.12.2015 ex38089390 30 Aqueous solution containing by weight: for use in the manufacture of a plant growth regulator 0 % 31.12.2015 ex38089390 40 Mixed white powder containing by weight: for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator 0 % 31.12.2015 ex38089390 50 Preparation in the form of powder, containing by weight: of a kind used in plant growth regulators 0 % 31.12.2015 ex38089990 10 Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water 0 % 31.12.2015 ex38089990 20 Abamectin (ISO) (CAS RN 71751-41-2) 0 % 31.12.2018 ex38099100 10 Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ5-dioxaphosphoran-5-ylmethyl) methylphosphonate 0 % 31.12.2018 ex38099200 20 Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol 0 % 31.12.2014 ex38101000 10 Soldering or welding paste, consisting of a mixture of metals and resin containing by weight: for use in the electro technical industry 0 % 31.12.2018 ex38111900 10 Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: 0 % 31.12.2014 ex38112100 10 Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils 0 % 31.12.2018 ex38112100 20 Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil 0 % 31.12.2018 ex38112100 30 Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38112100 40 Additives for lubricating oils, containing mineral oils, based on a mixture of dodecylphenol sulphide calcium salts (CAS RN 68784-26-9), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38112100 50 Additives for lubricating oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38112100 60 Additives for lubricating oils, containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38112100 70 Additives for lubricating oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38112900 20 Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38112900 30 Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38112900 40 Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,05 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38112900 50 Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % 31.12.2017 ex38119000 10 Dinonylnaphthylsulphonic acid salt, in a mineral oil solution 0 % 31.12.2018 ex38119000 40 Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % 2-ethylhexanol 0 % 31.12.2017 ex38121000 10 Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7) 0 % 31.12.2016 ex38122090 10 Plasticizer, containing: 0 % 31.12.2018 ex38123080 20 Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate 0 % 31.12.2018 ex38123080 25 UV photo stabiliser containing: 0 % 31.12.2018 ex38123080 30 Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol 0 % 31.12.2014 ex38123080 35 Mixture containing by weight: 0 % 31.12.2018 ex38123080 40 Mixture of: 0 % 31.12.2018 ex38123080 55 UV-stabilizer, containing: 0 % 31.12.2016 ex38123080 60 Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9) 0 % 31.12.2016 ex38123080 65 Stabiliser for plastic material containing: 0 % 31.12.2016 ex38123080 70 Light stabiliser containing: 0 % 31.12.2016 ex38123080 75 N,N′-Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) 0 % 31.12.2017 ex38123080 80 UV-stabilizer, consisting of: 0 % 31.12.2017 ex38140090 20 Mixture containing by weight: 0 % 31.12.2018 ex38140090 40 Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether 0 % 31.12.2018 ex38151200 10 Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver 0 % 31.12.2018 ex38151990 10 Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method) 0 % 31.12.2016 ex38151990 15 Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile 0 % 31.12.2018 ex38151990 25 Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde 0 % 31.12.2018 ex38151990 30 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene 0 % 31.12.2018 ex38151990 40 Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid 0 % 31.12.2018 ex38151990 60 Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide 0 % 31.12.2014 ex38151990 65 Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide 0 % 31.12.2018 ex38151990 70 Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide 0 % 31.12.2018 ex38151990 75 Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide 0 % 31.12.2018 ex38151990 80 Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil 0 % 31.12.2018 ex38151990 85 Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder 0 % 31.12.2018 ex38151990 86 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins 0 % 31.12.2018 ex38151990 ex85069000 87 10 Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) 0 % 31.12.2016 ex38159090 16 Initiator based on dimethylaminopropyl urea 0 % 31.12.2017 ex38159090 18 Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO′)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3) 0 % 31.12.2017 ex38159090 20 Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight: 0 % 31.12.2018 ex38159090 27 Catalyst, in the form of hollow cylinders with a length of 5 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, bismuth, iron and nickel, containing also a charge of silicon dioxide, for use in the manufacture of acrylic acid 0 % 31.12.2018 ex38159090 30 Catalyst, consisting of a suspension in mineral oil of: 0 % 31.12.2015 ex38159090 33 Catalyst, consisting of a mixture of different alkylnaphthalene sulphonic acids, with aliphatic hydrocarbon chains, containing 12 – 56 carbon atoms 0 % 31.12.2018 ex38159090 50 Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium 0 % 31.12.2018 ex38159090 70 Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols 0 % 31.12.2014 ex38159090 71 Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol 0 % 31.12.2016 ex38159090 80 Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol 0 % 31.12.2014 ex38159090 81 Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate 0 % 31.12.2018 ex38159090 85 Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins 0 % 31.12.2017 ex38159090 86 Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide 0 % 31.12.2018 ex38159090 88 Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: 0 % 31.12.2018 ex38159090 89 Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile 0 % 31.12.2016 ex38170050 10 Mixture of alkylbenzenes (C14-26) containing by weight: 0 % 31.12.2018 ex38170080 10 Mixture of alkylnaphthalenes, containing by weight: 0 % 31.12.2018 ex38170080 20 Mixture of branched alkyl benzenes mainly containing dodecyl benzenes 0 % 31.12.2018 ex38170080 30 Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms 0 % 31.12.2016 ex38190000 20 Fire resistant hydraulic fluid based on phosphate ester 0 % 31.12.2018 ex38231930 20 Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of: 0 % 31.12.2018 ex38231990 20 Palm acid oils from refining for use in the manufacture of: 0 % 31.12.2018 ex38249015 10 Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets 0 % 31.12.2018 ex38249097 05 Mixture of methylmethacrylate monomer and butylacrylate monomer in a solution of xylene and butylacetate, containing by weight more than 54 % but not more than 56 % of solvents 0 % 31.12.2014 ex38249097 06 Paraffin with a level of chlorination of 70 % or more 0 % 31.12.2014 ex38249097 07 Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material 0 % 31.12.2014 ex38249097 08 Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0) 0 % 31.12.2014 ex38249097 09 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: 0 % 31.12.2018 ex38249097 10 Calcined bauxite (refractory grade) 0 % 31.12.2018 ex38249097 11 Mixture of phytosterols, not in powder form, containing by weight: 0 % 31.12.2014 ex38249097 12 Oligomer of tetrafluoroethylene, having one iodoethyl end-group 0 % 31.12.2018 ex38249097 13 Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate 0 % 31.12.2016 ex38249097 14 Calcium phosphonate phenate, dissolved in mineral oil 0 % 31.12.2016 ex38249097 15 Structured silica alumina phosphate 0 % 31.12.2014 ex38249097 16 Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea 0 % 31.12.2018 ex38249097 17 Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 % 0 % 31.12.2018 ex38249097 18 Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 515136-48-8) 0 % 31.12.2014 ex38249097 20 Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: 0 % 31.12.2018 ex38249097 21 Mixture of 2-propenoic acid, (1-methylethylidene)bis(4,1-phenyleneoxy-2,1-ethanediyloxy-2,1-ethanediyl)ester with 2-propenoic acid, (2,4,6-trioxo-1,3,5-triazine-1,3,5(2H,4H,6H)-triyl)tri-2,1-ethanediyl ester and 1-hydroxy-cyclohexyl-phenyl ketone in the solution of methyl ethyl ketone and toluene 0 % 31.12.2014 ex38249097 22 Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol 0 % 31.12.2016 ex38249097 23 Mixture of urethane acrylates, tripropylene glycoldiacrylate, ethoxylated bisphenol A acrylate and poly(ethyleneglycol) 400 diacrylate 0 % 31.12.2014 ex38249097 24 Solution of (chloromethyl)bis(4-fluorophenyl)methylsilane of a nominal concentration of 65 % in toluene 0 % 31.12.2015 ex38249097 26 Aqueous dispersion, containing by weight: 0 % 31.12.2016 ex38249097 27 Preparation, consisting of a mixture of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and propan-2-ol 0 % 31.12.2015 ex38249097 28 Preparation containing by weight: 0 % 31.12.2015 ex38249097 29 Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors 0 % 31.12.2018 ex38249097 30 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated 0 % 31.12.2014 ex38249097 31 Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran 0 % 31.12.2015 ex38249097 32 Mixture of: 0 % 31.12.2016 ex38249097 33 Preparation, containing: 0 % 31.12.2016 ex38249097 35 Mixture of: 0 % 31.12.2017 ex38249097 36 Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0) 0 % 31.12.2017 ex38249097 37 Liquid crystal mixture for use in the manufacture of displays 0 % 31.12.2017 ex38249097 38 Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses 0 % 31.12.2017 ex38249097 39 Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid 0 % 31.12.2018 ex38249097 40 Azelaic acid of a purity by weight of 75 % or more but not more than 85 % 0 % 31.12.2014 ex38249097 41 Preparation, consisting of: 0 % 31.12.2017 ex38249097 42 Mixed metals oxides, in the form of powder, containing by weight: for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors 0 % 31.12.2018 ex38249097 43 Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators 0 % 31.12.2017 ex38249097 44 Mixture of phytosterols, not in the form of powder, containing by weight: for use in the manufacture of stanols/sterols or stanol/sterol esters 0 % 31.12.2017 ex38249097 45 Preparations consisting predominantly of ethylene glycol and: for the manufacture of electrolytic capacitors 0 % 31.12.2018 ex38249097 47 Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: 0 % 31.12.2017 ex38249097 49 Preparation containing: in which the gas formation from C,C′-azodi(formamide) occurs at 135 °C 0 % 31.12.2017 ex38249097 50 Powder mixture containing by weight: 0 % 31.12.2018 ex38249097 51 Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6) 0 % 31.12.2017 ex38249097 52 Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units 0 % 31.12.2014 ex38249097 53 Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units 0 % 31.12.2014 ex38249097 54 2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile 0 % 31.12.2018 ex38249097 55 Preparation consisting of: with a boiling point of 160 °C or more but not more than 180 °C 0 % 31.12.2018 ex38249097 56 Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran 0 % 31.12.2018 ex38249097 58 N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 % 0 % 31.12.2015 ex38249097 59 3′,4′,5′-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3′,4′,5′-trifluorobiphenyl-2-amine 0 % 31.12.2015 ex38249097 60 α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] 0 % 31.12.2018 ex38249097 62 Fused magnesia containing by weight 15 % or more of dichromium trioxide 0 % 31.12.2016 ex38249097 64 Aluminium sodium silicate, in the form of spheres of a diameter of: 0 % 31.12.2018 ex38249097 65 Preparation containing by weight: 0 % 31.12.2016 ex38249097 66 Mixture of primary tert-alkylamines 0 % 31.12.2014 ex38249097 78 Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 μm, containing by weight: 0 % 31.12.2017 ex38249097 79 Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine 0 % 31.12.2014 ex38249097 82 α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] 0 % 31.12.2018 ex38249097 84 Reaction product, containing by weight: 0 % 31.12.2014 ex38249097 87 Paste containing by weight: 0 % 31.12.2017 ex38249097 88 Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1′-oxybis(2-chloroethane) 0 % 31.12.2014 ex38249097 89 Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups 0 % 31.12.2018 ex38249097 90 Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics: for use in the manufacture of particle filters in motor vehicles 0 % 31.12.2018 ex38249097 92 Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide 0 % 31.12.2014 ex38249097 94 Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges 0 % 31.12.2018 ex38249097 95 Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols 0 % 31.12.2014 ex38249097 97 Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents 0 % 31.12.2018 ex38260010 ex38260010 20 29 Mixture of fatty acid methyl esters containing by weight at least: for use in the manufacture of detergents and home and personal care products 0 % 31.12.2018 ex38260010 ex38260010 30 39 Mixture of fatty acid methyl esters containing by weight at least: for use in the manufacture of agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components 0 % 31.12.2018 ex38260010 ex38260010 40 49 Mixture of fatty acid methyl esters containing by weight at least: for use in the manufacture of detergents and home and personal cleaning products, agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components 0 % 31.12.2018 ex39011090 20 Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a haze value not more than 6 % and an elongation at break (MD/TD) of 210/340 0 % 31.12.2018 ex39011090 30 Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper 0 % 31.12.2016 ex39012090 10 Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon 0 % 31.12.2018 ex39012090 20 Polyethylene, containing by weight 35 % or more but not more than 45 % of mica 0 % 31.12.2018 ex39013000 80 Ethylene-vinyl acetate copolymer, 0 % 31.12.2015 ex39013000 82 Ethylene-vinyl acetate copolymer, 0 % 31.12.2015 ex39019090 80 Block copolymer of ethylene with octene in the form of pellets: for use in the manufacture of napkin liners for babies 0 % 31.12.2015 ex39019090 82 Copolymer of ethylene and methacrylic acid 0 % 31.12.2015 ex39019090 91 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid 4 % 31.12.2018 ex39019090 92 Chlorosulphonated polyethylene 0 % 31.12.2018 ex39019090 93 Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets 0 % 31.12.2018 ex39019090 94 Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene 0 % 31.12.2018 ex39019090 97 Chlorinated polyethylene, in the form of powder 0 % 31.12.2018 ex39021000 10 Polypropylene containing no plasticizer and not more than: 0 % 31.12.2018 ex39021000 20 Polypropylene, containing no plasticiser, 0 % 31.12.2018 ex39021000 30 Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses 0 % 31.12.2018 ex39021000 40 Polypropylene, containing no plasticizer: 0 % 31.12.2014 ex39021000 50 High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties: 0 % 31.12.2015 ex39022000 10 Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800 0 % 31.12.2018 ex39022000 20 Hydrogenated polyisobutene, in liquid form 0 % 31.12.2018 ex39023000 91 A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 0 % 31.12.2018 ex39023000 95 A-B-A block copolymer, consisting of: 0 % 31.12.2016 ex39023000 97 Liquid ethylene-propylene-copolymer with: 0 % 31.12.2016 ex39029090 52 Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin 0 % 31.12.2018 ex39029090 55 Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene 0 % 31.12.2018 ex39029090 60 Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: 0 % 31.12.2014 ex39029090 84 Blend of hydrogenated styrenic block copolymer, polyethylene wax, and tackifier resin, in the form of pellets, containing by weight: with the following physical properties: for use in the manufacture of napkins and napkin liners for babies 0 % 31.12.2015 ex39029090 92 Polymers of 4-methylpent-1-ene 0 % 31.12.2018 ex39029090 93 Synthetic poly-alpha-olefin having a viscosity of at least 38 × 10–6m2s–1 (38 centistokes) at 100 °C measured using the ASTM D 445 method 0 % 31.12.2016 ex39029090 98 Synthetic poly-alpha-olefin with a viscosity at 100 ° Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene 0 % 31.12.2016 ex39031100 10 White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK at a density of 14,0 kg/m3 (± 1,5 kg/m3), containing 50 % recycled material 0 % 31.12.2018 ex39031900 30 Crystalline polystyrene with a melting point of 268 °C or more but not more than 272 °C and a setting point of 232 °C or more but not more than 242 °C, whether or not containing additives and filling material 0 % 31.12.2016 ex39039090 10 Butadiene-styrene copolymer pellets or granules, with: 0 % 31.12.2016 ex39039090 15 Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, n-butyl methacrylate, methacrylic acid and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % 31.12.2016 ex39039090 20 Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, n-butyl methacrylate and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % 31.12.2016 ex39039090 25 Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, methacrylic acid and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers 0 % 31.12.2016 ex39039090 30 Butadiene-styrene copolymer pellets or granules with a melting point of 85 °C (± 5 °C), containing by weight: 0 % 31.12.2016 ex39039090 ex39119099 35 43 Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C 0 % 31.12.2018 ex39039090 ex39119099 40 50 Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6000 0 % 31.12.2018 ex39039090 50 Crystalline copolymer of styrene and p-methylstyrene: 0 % 31.12.2015 ex39039090 ex39119099 60 60 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form 0 % 31.12.2016 ex39039090 75 Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulphate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 33052000 or of hair dyes of subheading 330590 0 % 31.12.2014 ex39039090 80 Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight: for use in the manufacture of ion exchange resins 0 % 31.12.2018 ex39039090 86 Mixture containing by weight: and with one or more of the following special colour effects: 0 % 31.12.2018 ex39041000 20 Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with: for use in the manufacture of battery separators 0 % 31.12.2014 ex39043000 20 Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight: for use in the heat-sealing of plastics onto steel substrate for industrial uses 0 % 31.12.2014 ex39043000 ex39044000 30 91 Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink 0 % 31.12.2018 ex39044000 93 Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 % (± 1 %) of vinyl chloride and 20 % (± 1 %) of methyl acrylate, in the form of a aqueous emulsion 0 % 31.12.2018 ex39045090 92 Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments 0 % 31.12.2014 ex39046100 20 Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions 0 % 31.12.2018 ex39046100 30 Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not more than 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm 0 % 31.12.2018 ex39046980 81 Poly(vinylidene fluoride) (CAS RN 24937-79-9) 0 % 31.12.2015 ex39046980 85 Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers 0 % 31.12.2017 ex39046980 93 Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39 0 % 31.12.2018 ex39046980 94 Copolymer of ethylene and tetrafluoroethylene 0 % 31.12.2018 ex39046980 96 Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 0 % 31.12.2018 ex39046980 97 Copolymer of chlorotrifluoroethylene and vinylidene difluoride 0 % 31.12.2018 ex39053000 10 Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors 0 % 31.12.2017 ex39059100 20 Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 13 % of the monomer unit ethylene 0 % 31.12.2017 ex39059990 92 Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water 0 % 31.12.2018 ex39059990 95 Hexadecylated or eicosylated polyvinylpyrrolidone 0 % 31.12.2018 ex39059990 96 Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25000 or more but not more than 150000 and containing by weight: 0 % 31.12.2018 ex39059990 97 Povidone (INN)-iodine (CAS RN 25655-41-8) 0 % 31.12.2018 ex39059990 98 Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups 0 % 31.12.2018 39069060 Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide 0 % 31.12.2018 ex39069090 10 Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004 0 % 31.12.2018 ex39069090 15 Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer 0 % 31.12.2018 ex39069090 27 Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate 0 % 31.12.2017 ex39069090 30 Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 6000 0 % 31.12.2018 ex39069090 35 White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water 0 % 31.12.2018 ex39069090 40 Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with: 0 % 31.12.2015 ex39069090 41 Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30 0 % 31.12.2014 ex39069090 45 Acrylonitrile-butadiene-styrene-methylmethacrylate copolymer pellets with: containing by weight: 0 % 31.12.2016 ex39069090 50 Polymers of esters of acrylic acid with one or more of the following monomers in the chain: containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39 0 % 31.12.2018 ex39069090 65 Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC) 0 % 31.12.2018 ex39069090 80 Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates) 0 % 31.12.2018 ex39069090 85 Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends 0 % 31.12.2014 ex39072011 10 Poly(ethylene oxide) of a number average molecular weight (Mn) of 100000 or more 0 % 31.12.2018 ex39072011 20 Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40000 0 % 31.12.2018 ex39072011 40 Polyethylene glycol with an ethylene oxide chain length of not more than 30, having butyl-2-cyano 3-(4-hydroxyphenyl) acrylate end groups, for use as a UV barrier in liquid masterbatches 0 % 31.12.2015 ex39072011 50 [3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2) 0 % 31.12.2016 ex39072011 60 Preparation containing: 0 % 31.12.2016 ex39072020 20 Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2700 or more but not more than 3100 (CAS RN 25190-06-1) 0 % 31.12.2017 ex39072020 30 Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone 0 % 31.12.2018 ex39072020 40 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3500 (± 100) 0 % 31.12.2018 ex39072099 15 Poly(oxypropylene) having alkoxysilyl end-groups 0 % 31.12.2018 ex39072099 30 Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) 0 % 31.12.2018 ex39072099 35 Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate 0 % 31.12.2018 ex39072099 45 Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups 0 % 31.12.2018 ex39072099 50 Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient 0 % 31.12.2018 ex39072099 55 Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5000 0 % 31.12.2018 ex39072099 60 Polytetramethylene oxide di-p-aminobenzoate 0 % 31.12.2016 ex39072099 65 L-Lysine N-hydroxysuccinimidyl ester.alpha.,.epsilon.-bis(polyethylene glycol monomethylether carbamate) (CAS RN 266318-38-1) of a number average molecular weight (Mn) of 38000 or more but not more than 40000 0 % 31.12.2018 ex39073000 ex39269097 40 70 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 8548 0 % 31.12.2018 ex39073000 50 Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with: 0 % 31.12.2018 ex39073000 60 Polyglycerol polyglycidyl ether resin (CAS RN 105521-63-9) 0 % 31.12.2017 ex39074000 10 Polycarbonate pellets or granules: 0 % 31.12.2016 ex39074000 20 Polycarbonate pellets or granules with a specific gravity of 1,32 (± 0,03), containing 20 % (± 5 %) of glass fibre 0 % 31.12.2016 ex39074000 30 Polycarbonate pellets or granules with a specific gravity of 1,18 or more but not more than 1,25, containing by weight: whether or not containing 1 % or more but not more than 5 % of flame retardant 0 % 31.12.2016 ex39074000 40 Polycarbonate granules with: 0 % 31.12.2016 ex39074000 50 Polycarbonate resin, pellets or granules, with: 0 % 31.12.2016 ex39074000 60 Polycarbonate acrylonitrile-butadiene-styrene pellets or granules with specific gravity of 1,20 (± 0,05), containing by weight: 0 % 31.12.2016 ex39076080 10 Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol 0 % 31.12.2018 ex39076080 30 Oxygen binding concentrate consisting of a blend of: where the first co-polymer predominates 0 % 31.12.2014 ex39076080 40 Poly(ethylene terephthalate) pellets or granules: 0 % 31.12.2016 ex39076080 50 Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of: with a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa 0 % 31.12.2017 39077000 Poly(lactic acid) 0 % 31.12.2018 ex39079190 10 Diallyl phthalate prepolymer, in powder form 0 % 31.12.2014 ex39079990 10 Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder 0 % 31.12.2018 ex39079990 20 Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers 0 % 31.12.2018 ex39079990 25 Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol 0 % 31.12.2017 ex39079990 ex39139000 30 20 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) 0 % 31.12.2015 ex39079990 60 Copolymer of terephthalic acid and isophthalic acid with bisphenol A 0 % 31.12.2017 ex39079990 70 Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol 0 % 31.12.2014 ex39079990 80 Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles 0 % 31.12.2015 ex39089000 10 Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39 0 % 31.12.2018 ex39089000 30 Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine 0 % 31.12.2018 ex39089000 50 Oxygen binding concentrate consisting of a blend of: where the second co-polymer predominates 0 % 31.12.2014 ex39089000 60 Copolymer consisting of: 0 % 31.12.2017 ex39094000 10 Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm 0 % 31.12.2018 ex39094000 20 Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices 0 % 31.12.2015 ex39094000 30 Mixture of: 0 % 31.12.2017 ex39094000 40 Polymer in powder form with a content of: 0 % 31.12.2018 ex39095090 10 UV curable water soluble liquid photopolymer consisting of a mixture by weight of 0 % 31.12.2014 ex39100000 20 Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] 0 % 31.12.2018 ex39100000 40 Biocompatible silicones for the manufacture of long term surgical implants 0 % 31.12.2016 ex39100000 50 Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum 0 % 31.12.2017 ex39100000 60 Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups 0 % 31.12.2014 ex39100000 70 Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices 0 % 31.12.2018 ex39111000 81 Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with: 0 % 31.12.2018 ex39119019 10 Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4′-biphenylene) 0 % 31.12.2018 ex39119019 30 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide 0 % 31.12.2017 ex39119019 40 m- Xylene formaldehyde resin 0 % 31.12.2016 ex39119099 25 Copolymer of vinyltoluene and α-methylstyrene 0 % 31.12.2018 ex39119099 30 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated 0 % 31.12.2015 ex39119099 31 Copolymers of butadiene and maleic acid, whether or not containing its ammonium salts 0 % 31.12.2014 ex39119099 35 Alternated copolymer of ethylene and maleic anhydride (EMA) 0 % 31.12.2015 ex39119099 40 Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight 0 % 31.12.2018 ex39119099 45 Copolymer of maleic acid and methyl vinyl ether 0 % 31.12.2018 ex39119099 53 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4) 0 % 31.12.2017 ex39119099 57 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0) 0 % 31.12.2017 ex39119099 65 Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether 0 % 31.12.2018 ex39119099 86 Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9) 0 % 31.12.2016 ex39121100 30 Cellulose triacetate (CAS RN 9012-09-3) 0 % 31.12.2016 ex39121100 40 Cellulose diacetate powder 0 % 31.12.2015 ex39122011 10 Nitrocellulose (CAS RN 9004-70-0) 0 % 31.12.2016 ex39123985 10 Ethylcellulose, not plasticized 0 % 31.12.2018 ex39123985 20 Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose 0 % 31.12.2018 ex39123985 30 Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms 0 % 31.12.2018 ex39123985 40 Hypromellose (INN) (CAS RN 9004-65-3) 0 % 31.12.2016 ex39129010 10 Cellulose acetate propionate, non-plasticised, in the form of powder: for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings 0 % 31.12.2018 ex39129010 20 Hydroxypropyl methylcellulose phthalate 0 % 31.12.2018 ex39139000 85 Sterile sodium hyaluronate (CAS RN 9067-32-7) 0 % 31.12.2018 ex39139000 92 Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100000 to 300000 0 % 31.12.2018 ex39139000 94 Granules containing by weight: 0 % 31.12.2016 ex39139000 95 Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9) 0 % 31.12.2018 ex39139000 96 Powder consisting of 90 % (± 5 %) by weight of a high amylose extruded biopolymer produced from corn starch, 10 % (± 5 %) by weight of a synthetic polymer and 0,5 % (± 0,25 %) of stearic acid 0 % 31.12.2016 ex39162000 91 Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives: 0 % 31.12.2014 ex39169010 10 Rods with cellular structure, containing by weight: 0 % 31.12.2018 ex39173200 91 Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not more than 110 μm 0 % 31.12.2018 ex39174000 91 Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses 0 % 31.12.2014 ex39191019 ex39191080 ex39199000 10 25 31 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film 0 % 31.12.2018 ex39191019 20 Rolls of two-sided adhesive tape: 0 % 31.12.2018 ex39191080 ex39199000 ex39206100 21 21 20 Reflecting sheet, consisting of: 0 % 31.12.2018 ex39191080 23 Reflecting film, consisting of several layers including: 0 % 31.12.2014 ex39191080 ex39199000 27 20 Polyester film: 0 % 31.12.2014 ex39191080 30 Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale 0 % 31.12.2016 ex39191080 32 Polytetrafluoroethylene film: 0 % 31.12.2014 ex39191080 35 Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film 0 % 31.12.2018 ex39191080 37 Polytetrafluoroethylene film: 0 % 31.12.2014 ex39191080 ex39199000 40 43 Black poly(vinyl chloride) film: 0 % 31.12.2016 ex39191080 ex39199000 43 26 Ethylene vinyl acetate film: 0 % 31.12.2014 ex39191080 ex39199000 45 45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm 0 % 31.12.2017 ex39191080 ex39199000 47 32 Polyester, polyurethane or polycarbonate foil: of a kind used for the protection of the surface of products of headings 8521 and 8528 0 % 31.12.2017 ex39191080 ex39199000 ex39201089 50 41 25 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs 0 % 31.12.2018 ex39191080 ex39199000 ex39201028 ex39201089 53 34 93 50 Polyethylene foil: of a kind used for the protection of the surface of products of headings 8521 and 8528 0 % 31.12.2017 ex39191080 ex39199000 55 53 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 ° of more than 25 N/cm (as determined by the ASTM D 3330 method) 0 % 31.12.2017 ex39191080 60 Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet 0 % 31.12.2018 ex39191080 ex39199000 65 57 Self-adhesive reflecting sheet whether or not in segmented pieces: 0 % 31.12.2018 ex39191080 ex39199000 70 75 Rolls of polyethylene foil: of a kind used for the protection of the surface of products of headings 8521 or 8528 0 % 31.12.2016 ex39191080 ex39199000 75 80 Self-adhesive reflecting film, consisting of several layers including: 0 % 31.12.2016 ex39191080 ex39199000 80 83 Acrylic tape put up in rolls: for use in the manufacture of products of headings 8521 and 8528 0 % 31.12.2016 ex39191080 ex39199000 85 28 Poly(vinyl chloride) or polyethylene or any other polyolefine film: 0 % 31.12.2014 ex39199000 19 Transparent poly(ethylene terephthalate) self-adhesive film: 0 % 31.12.2018 ex39199000 22 Black polypropylene film: 0 % 31.12.2014 ex39199000 23 Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner 0 % 31.12.2018 ex39199000 24 Reflecting laminated sheet: 0 % 31.12.2014 ex39199000 25 Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner 0 % 31.12.2017 ex39199000 27 Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V 0 % 31.12.2018 ex39199000 29 Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7 cm or more but not more than 132 cm (supplied with a release liner) 0 % 31.12.2014 ex39199000 33 Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1245 mm but not more than 1255 mm 0 % 31.12.2018 ex39199000 35 Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: 0 % 31.12.2018 ex39199000 ex39204910 36 95 Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) 0 % 31.12.2017 ex39199000 37 UV-absorbing film of poly (vinyl chloride): 0 % 31.12.2014 ex39199000 38 Self-adhesive film composed of: 0 % 31.12.2017 ex39199000 39 Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100 μm 0 % 31.12.2018 ex39199000 40 Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film: 0 % 31.12.2017 ex39199000 42 Self-adhesive film composed of: 0 % 31.12.2017 ex39199000 ex39219060 44 95 Printed laminated sheet 0 % 31.12.2017 ex39199000 ex90012000 47 40 Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side 0 % 31.12.2017 ex39199000 49 Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet 0 % 31.12.2018 ex39199000 51 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet 0 % 31.12.2018 ex39199000 60 Reflecting film containing: 0 % 31.12.2015 ex39199000 63 Co-extruded trilayer film, 0 % 31.12.2015 ex39199000 65 Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner 0 % 31.12.2015 ex39199000 70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad 0 % 31.12.2015 ex39199000 81 Film of a minimum thickness of 0,36 mm, consisting of the following: and covered on one side with a release liner 0 % 31.12.2018 ex39199000 85 Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper: 0 % 31.12.2016 ex39199000 87 Self-adhesive transparent film, having a transmittance of more than 90 % and a haze of less than 3 % (as determined by ASTM D1003), consisting of several layers including: 0 % 31.12.2016 ex39201025 ex39201089 10 20 Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber 0 % 31.12.2018 ex39201025 20 Film of polyethylene, of a kind used for typewriter ribbon 0 % 31.12.2018 ex39201028 91 Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: 0 % 31.12.2018 ex39201040 30 Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of: and having an overall total thickness of not more than 110 μm 0 % 31.12.2017 ex39201089 30 Ethylene vinyl acetate (EVA) film with: 0 % 31.12.2016 ex39201089 40 Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm 0 % 31.12.2016 ex39202021 30 Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm 0 % 31.12.2018 ex39202021 40 Sheets of biaxially - oriented polypropylene film: 0 % 31.12.2016 ex39202029 ex85079030 50 95 Sheet of polypropylene in the form of a roll: for use in the manufacture of separators for lithium-ion electric vehicle batteries 0 % 31.12.2016 ex39202029 ex39202080 55 93 Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: and having an overall total thickness of not more than 110 μm 0 % 31.12.2017 ex39202029 92 Mono-axial oriented film, of a total thickness of not more than 75 μm, consisting of two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: as determined by test method ASTM D882/ISO 527-3 0 % 31.12.2018 ex39202029 93 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having: 0 % 31.12.2014 ex39202029 94 Co-extruded trilayer film, 0 % 31.12.2016 ex39202080 92 Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not more than 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester 0 % 31.12.2018 ex39202080 95 Polypropylene sheet, put up in rolls, with: for use in the manufacture of insulators used in the electronics and electrical industries 0 % 31.12.2017 ex39204310 92 Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride) 0 % 31.12.2018 ex39204310 ex39204910 94 93 Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1000 mm or more but not more than 1450 mm, for use in the manufacture of goods of heading 9403 0 % 31.12.2018 ex39204310 95 Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet 0 % 31.12.2018 ex39204910 30 Film of a (polyvinyl)chloride-copolymer 0 % 31.12.2018 ex39205100 20 Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm 0 % 31.12.2018 ex39205100 30 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm 0 % 31.12.2018 ex39205100 40 Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690) 0 % 31.12.2018 ex39205990 10 Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls 0 % 31.12.2016 ex39205990 20 Reflecting laminated sheet, consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material 0 % 31.12.2014 ex39205990 30 Non-self-adhesive reflecting film, consisting of several layers including: 0 % 31.12.2016 ex39206219 02 Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black 0 % 31.12.2018 ex39206219 08 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either: 0 % 31.12.2018 ex39206219 12 Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material 0 % 31.12.2018 ex39206219 18 Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material 0 % 31.12.2018 ex39206219 20 Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers 0 % 31.12.2018 ex39206219 25 Film of poly(ethylene terephthalate) of a thickness of 186 μm or more but not more than 191 μm coated on one side with an acrylic layer in a matrix pattern 0 % 31.12.2014 ex39206219 38 Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm 0 % 31.12.2018 ex39206219 48 Sheets or rolls of poly(ethylene terephthalate): 0 % 31.12.2015 ex39206219 52 Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10000 ohms (per square) (as determined by the ASTM D 257-99 method) 0 % 31.12.2018 ex39206219 ex39206900 73 40 Iridescent film of polyester and poly(methyl methacrylate) 0 % 31.12.2018 ex39206219 76 Transparent poly(ethylene terephthalate) film: 0 % 31.12.2018 ex39206219 81 Poly(ethylene terephthalate) film: 0 % 31.12.2017 ex39206900 20 Film of poly(ethylene naphthalene-2,6-dicarboxylate) 0 % 31.12.2018 ex39209100 51 Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticizer 0 % 31.12.2014 ex39209100 52 Poly(vinyl butyral) film: 0 % 31.12.2014 ex39209100 91 Poly(vinyl butyral) film having a graduated coloured band 3 % 31.12.2018 ex39209100 92 Plasticised film of polyvinyl butyral, containing by weight: 0 % 31.12.2014 ex39209100 93 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: for use in the manufacture of heat-reflecting or decorative laminated glass 0 % 31.12.2014 ex39209100 95 Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2′-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser 0 % 31.12.2018 ex39209200 30 Polyamide film: 0 % 31.12.2018 ex39209928 35 Polyether imide sheets, in rolls, with 0 % 31.12.2018 ex39209928 40 Polymer film containing the following monomers: 0 % 31.12.2018 ex39209928 45 Transparent polyurethane film metallised on one side: 0 % 31.12.2018 ex39209928 50 Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film 0 % 31.12.2016 ex39209928 55 Thermoplastic polyurethane film extruded, with: of a kind used in the production of laminated safety glass 0 % 31.12.2017 ex39209928 60 Silicone tape, plate or strip: for use in the manufacture of products of headings 8521 or 8528 0 % 31.12.2016 ex39209928 70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: 0 % 31.12.2016 ex39209959 25 Poly(1-chlorotrifluoroethylene) film 0 % 31.12.2018 ex39209959 50 Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not more than 0,14 mm, impermeable to water vapour 0 % 31.12.2018 ex39209959 55 Ion-exchange membranes of fluorinated plastic material 0 % 31.12.2018 ex39209959 60 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 45 MPa and an elongation at break of 250 % or more but not more than 900 % 0 % 31.12.2018 ex39209990 20 Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays 0 % 31.12.2018 ex39211310 10 Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092 0 % 31.12.2018 ex39211310 20 Rolls of open-cell polyurethane foam: 0 % 31.12.2017 ex39211900 30 Blocks with cellular structure, containing by weight: 0 % 31.12.2018 ex39211900 91 Microporous polypropylene film of a thickness of not more than 100 μm 0 % 31.12.2018 ex39211900 93 Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment 0 % 31.12.2018 ex39211900 95 Film of polyethersulfone, of a thickness of not more than 200 μm 0 % 31.12.2018 ex39211900 96 Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not more than 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not more than 40 μm 0 % 31.12.2018 ex39219010 10 Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres 0 % 31.12.2018 ex39219010 20 Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin 0 % 31.12.2018 ex39219055 20 Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring: for use in the manufacture of printed circuit boards 0 % 31.12.2018 ex39219055 ex70194000 25 20 Prepreg sheets or rolls containing polyimide resin 0 % 31.12.2014 ex39219055 30 Prepreg sheets or rolls containing brominated epoxy resin reinforced with glass fabric, having for use in the manufacture of printed circuit boards 0 % 31.12.2014 ex39219060 ex54077100 ex59039099 91 20 10 Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form 0 % 31.12.2018 ex39219060 93 Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances 0 % 31.12.2018 ex39219090 ex85079080 10 50 Roll of polymer-metal laminate comprising: for use in the manufacture of lithium-ion electric vehicle batteries 0 % 31.12.2016 ex39231000 10 Photomask or wafer compacts: of a kind used in the photolithography or other semiconductor production to house photomasks or wafers 0 % 31.12.2016 ex39233090 10 Polyethylene container, for compressed hydrogen: 0 % 31.12.2018 ex39269092 20 Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material 0 % 31.12.2018 ex39269097 10 Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm 0 % 31.12.2018 ex39269097 15 Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems 0 % 31.12.2018 ex39269097 25 Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm 0 % 31.12.2018 ex39269097 55 Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not more than 1200 μm and of a weight of 21 g/m2 or more but not more than 42 g/m2 0 % 31.12.2018 ex39269097 65 Die-cast decoration element made of polycarbonate resin, coated with of a kind used in the manufacture of car radio front panels 0 % 31.12.2018 ex39269097 80 Parts of car radio front panels 0 % 31.12.2016 ex40070000 10 Siliconated vulcanised rubber thread and cord 0 % 31.12.2018 ex40169997 20 Soft rubber sealing stoppers for the manufacture of electrolytic capacitors 0 % 31.12.2018 ex40169997 30 Tyre moulding bladder 0 % 31.12.2016 ex41044119 10 Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry 0 % 31.12.2017 41051000 41053090 Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 0 % 31.12.2018 41062100 41062290 Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 0 % 31.12.2018 41063100 41063200 41064090 41069200 Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114 0 % 31.12.2018 ex50040010 10 Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk 0 % 31.12.2016 ex50050010 ex50050090 10 10 Yarn spun entirely from silk waste (noil), not put up for retail sale 0 % 31.12.2018 ex52053100 10 Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons 0 % 31.12.2018 52081110 Fabrics for the manufacture of bandages, dressings and medical gauzes 5,2 % 31.12.2018 ex54024500 20 Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid 0 % 31.12.2018 ex54024700 10 Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1650 decitex or more but not more than 1800 decitex, consisting of 110 filaments or more but not more than 120 filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not more than 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings 0 % 31.12.2016 ex54024700 20 Bicomponent monofilament yarn of not more than 30 dtex, consisting of: for use in the manufacture of filtration fabrics 0 % 31.12.2015 ex54024900 30 Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures 0 % 31.12.2018 ex54024900 50 Non-textured filament yarn of poly(vinyl alcohol) 0 % 31.12.2018 ex54024900 70 Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1000 continuous filaments or more but not more than 25000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn 0 % 31.12.2018 ex54041900 20 Monofilament of poly(1,4-dioxanone) 0 % 31.12.2018 ex54041900 30 Unsterilised monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures 0 % 31.12.2014 ex54041900 50 Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers 0 % 31.12.2018 ex54049090 20 Strip of polyimide 0 % 31.12.2018 ex54071000 10 Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine) 0 % 31.12.2017 ex55031100 ex56013000 10 40 Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine), of a length of not more than 7 mm 0 % 31.12.2018 ex55034000 10 Hollow polypropylene staple fibres: for use in the manufacture of napkins and napkin liners for babies and other sanitary products 0 % 31.12.2016 ex55039000 ex55069000 ex56013000 20 10 10 Poly(vinyl alcohol) fibres, whether or not acetalized 0 % 31.12.2018 ex56031110 ex56031190 ex56031210 ex56031290 ex56039110 ex56039190 ex56039210 ex56039290 10 10 10 10 10 10 10 10 Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: 0 % 31.12.2018 ex56031110 ex56031190 20 20 Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins 0 % 31.12.2017 ex56031290 ex56031390 ex56031490 ex56039290 ex56039390 ex56039490 30 30 10 60 40 30 Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles 0 % 31.12.2018 ex56031290 50 Non-woven: for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles 0 % 31.12.2017 ex56031290 ex56031390 60 60 Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 s or more but not more than 36 s (as determined by the ISO 5636/5 method) 0 % 31.12.2018 ex56031290 ex56031390 ex56039290 ex56039390 70 70 40 10 Non-wovens of polypropylene, 0 % 31.12.2018 ex56031310 ex56031410 10 10 Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical nonconductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material 0 % 31.12.2018 ex56031310 20 Non-woven of spunbonded polyethylene, with a coating, 0 % 31.12.2015 ex56031490 40 Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media: of a kind used for the manufacture of industrial filters 0 % 31.12.2018 ex56039290 ex56039390 20 20 Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene 0 % 31.12.2018 ex56039290 ex56039490 70 40 Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene 0 % 31.12.2018 ex56039290 ex56039390 80 50 Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments: for use in the manufacture of infant/child care products 0 % 31.12.2016 ex56039490 20 Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips 0 % 31.12.2018 ex56075090 10 Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures 0 % 31.12.2014 ex58030010 91 Gauze of cotton, of a width of less than 1500 mm 0 % 31.12.2018 ex59031090 ex59032090 ex59039099 10 10 20 Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres 0 % 31.12.2018 ex59069990 10 Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine) 0 % 31.12.2018 ex59070000 10 Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm 0 % 31.12.2016 ex59111000 10 Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products 0 % 31.12.2018 ex59119090 ex84219900 30 92 Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more 0 % 31.12.2018 ex59119090 40 Multi-layered non-woven polyester polishing pads, impregnated with polyurethane 0 % 31.12.2014 ex68138900 10 Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches 0 % 31.12.2018 ex68141000 10 Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres, for use in the manufacture of insulation products for high voltage applications 0 % 31.12.2018 ex69039090 20 Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials 0 % 31.12.2018 ex69091900 15 Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm (+ 0,00 mm/-0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight: 0 % 31.12.2017 ex69091900 20 Silicon nitride (Si3N4) rollers or balls 0 % 31.12.2015 ex69091900 30 Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end 0 % 31.12.2018 ex69091900 ex69149000 50 20 Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: 0 % 31.12.2018 ex69091900 60 Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end 0 % 31.12.2018 ex69091900 70 Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section 0 % 31.12.2018 ex69091900 80 Ceramic heat sinks, containing by weight: for maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521 or 8528 0 % 31.12.2016 ex69149000 30 Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm 0 % 31.12.2018 ex70051030 10 Float glass: 0 % 31.12.2017 ex70060090 70 Float glass: 0 % 31.12.2016 ex70071920 10 Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 8528 0 % 31.12.2018 ex70072900 10 Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides 0 % 31.12.2018 ex70091000 10 Electro-cromic auto-dimming glass for motor vehicle mirrors: 0 % 31.12.2017 ex70099100 10 Unframed glass mirrors with: 0 % 31.12.2015 70112000 Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes 0 % 31.12.2018 ex70140000 10 Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware 0 % 31.12.2018 ex70191200 ex70191200 01 21 Rovings, measuring 2600 tex or more but not more than 3300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method) 0 % 31.12.2018 ex70191200 ex70191200 02 22 Rovings, measuring 650 tex or more but not more than 2500 tex, coated with a layer of polyurethane whether or not mixed with other materials 0 % 31.12.2018 ex70191200 ex70191200 03 23 Rovings, measuring 392 tex or more but not more than 2884 tex, coated with a layer of an acrylic copolymer 0 % 31.12.2018 ex70191200 ex70191200 05 25 Rovings ranging from 1980 to 2033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm) 0 % 31.12.2017 ex70191910 10 Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers 0 % 31.12.2018 ex70191910 15 S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm / + 1,5 μm) 0 % 31.12.2017 ex70191910 20 Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % 31.12.2015 ex70191910 25 Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % 31.12.2015 ex70191910 30 Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate 0 % 31.12.2014 ex70191910 50 Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 percent by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated 0 % 31.12.2016 ex70191910 55 Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of: coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene 0 % 31.12.2014 ex70191910 ex70199000 60 30 High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR) 0 % 31.12.2018 ex70191910 ex70199000 70 20 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) 0 % 31.12.2018 ex70191910 ex70199000 80 40 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene 0 % 31.12.2018 ex70193900 50 Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts 0 % 31.12.2016 ex70194000 10 Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of: 0 % 31.12.2018 ex70199000 10 Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate 0 % 31.12.2018 ex70200010 ex76169990 10 77 Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body 0 % 31.12.2016 ex72011011 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm 0 % 31.12.2016 ex72011030 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon 0 % 31.12.2016 72025000 Ferro-silico-chromium 0 % 31.12.2018 ex72029980 10 Ferro-dysprosium, containing by weight: 0 % 31.12.2015 ex73181499 ex73181499 20 29 Rock bolt: of a kind used for support of mines 0 % 31.12.2016 ex73209010 91 Flat spiral spring of tempered steel, with: for use in the manufacture of tensioners for power transmission belts, for internal combustion engines 0 % 31.12.2018 ex73259910 20 Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors 0 % 31.12.2014 ex73262000 20 Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,017 mm or more but not more than 0,070 mm, compacted by sintering and rolling 0 % 31.12.2016 ex74101100 ex85079080 ex85459090 10 60 30 Roll of laminate foil of graphite and copper, with: for use in the manufacture of lithium-ion electric vehicle batteries 0 % 31.12.2016 ex74102100 10 Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil 0 % 31.12.2018 ex74102100 30 Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil 0 % 31.12.2018 ex74102100 40 Sheet or plates: coated on one or both sides with a copper film with a maximum thickness of 0,15 mm 0 % 31.12.2018 ex74102100 50 Plates: 0 % 31.12.2018 ex74102100 60 Plates, rolls and sheets of synthetic or artificial resin: for use in the manufacture of circuit boards 0 % 31.12.2018 ex74102100 70 Plates, rolls or sheets: for use in the manufacture of circuit boards 0 % 31.12.2018 ex74199990 ex76169990 91 60 Disc (target) with deposition material, consisting of molybdenum silicide: 0 % 31.12.2018 76012020 Slabs and billets of unwrought aluminium alloys 4 % 31.12.2018 ex76012020 10 Slabs and billets of aluminium alloy containing lithium 0 % 31.12.2017 ex76042100 ex76042990 10 30 Profiles made of aluminium alloy conforming to EN standard AW-6063 T5 for use in the manufacture of goods of heading 8302 0 % 31.12.2018 ex76042910 ex76061299 10 20 Sheets and bars of aluminium-lithium alloys 0 % 31.12.2015 ex76051900 10 Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm 0 % 31.12.2018 ex76061292 ex76071190 20 20 Aluminium and magnesium alloy strip: containing by weight: 0 % 31.12.2017 ex76071190 10 Plain aluminium foil with the following parameters: of a kind used for high voltage etching 0 % 31.12.2016 ex76071190 40 Aluminium foil in rolls: 0 % 31.12.2016 ex76071990 ex85079080 10 80 Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: for use in the manufacture of cathodes for lithium-ion electric vehicle batteries 0 % 31.12.2016 ex76072090 10 Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries 0 % 31.12.2017 ex76072090 20 Lubricating entry sheet of a total thickness of not more than 350 μm, comprising of: 0 % 31.12.2015 ex76130000 20 Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg 0 % 31.12.2018 ex76169990 15 Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts 0 % 31.12.2018 ex76169990 ex84828000 ex88033000 70 10 40 Connecting components for use in the production of helicopter tail rotor shafts 0 % 31.12.2016 ex76169990 75 Parts in the shape of a rectangular frame: of a kind used in the manufacture of TV sets 0 % 31.12.2017 ex81021000 10 Molybdenum powder with: 0 % 31.12.2017 81041100 Unwrought magnesium, containing at least 99,8 % by weight of magnesium 0 % 31.12.2018 ex81043000 30 Magnesium powder: 0 % 31.12.2015 ex81049000 10 Ground and polished magnesium sheets, of dimensions not more than 1500 mm × 2000 mm, coated on one side with an epoxy resin insensitive to light 0 % 31.12.2018 ex81059000 10 Bars or wires made of cobalt alloy containing, by weight: conforming to the material specifications AMS 5842, of a kind used in the aerospace industry 0 % 31.12.2017 ex81082000 10 Titanium sponge 0 % 31.12.2018 ex81082000 30 Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm 0 % 31.12.2018 ex81083000 10 Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium 0 % 31.12.2018 ex81089030 10 Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040 0 % 31.12.2014 ex81089030 20 Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 870892 or 87141000 0 % 31.12.2017 ex81089030 30 Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928 and 4967 0 % 31.12.2015 ex81089030 40 Wire of an titanium alloy containing by weight: 0 % 31.12.2016 ex81089050 10 Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1000 mm or more but not more than 1254 mm, for the manufacture of goods of subheading 87141000 0 % 31.12.2018 ex81089050 30 Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of: 0 % 31.12.2017 ex81089050 50 Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium 0 % 31.12.2017 ex81089050 60 Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight: 0 % 31.12.2018 ex81089050 70 Strip of an alloy of titanium, containing by weight: 0 % 31.12.2016 ex81089050 75 Plates, sheets, strips and foil of titanium alloy, containing by weight: 0 % 31.12.2016 ex81089050 85 Plates, sheets, strip and foil of non-alloyed titanium 0 % 31.12.2017 ex81089090 ex90039000 20 10 Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium 0 % 31.12.2016 ex81092000 10 Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry 0 % 31.12.2018 ex81101000 10 Antimony in the form of ingots 0 % 31.12.2018 ex81129930 10 Alloy of niobium (columbium) and titanium, in the form of bars and rods 0 % 31.12.2018 ex81130020 10 Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide 0 % 31.12.2016 ex81130090 10 Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits 0 % 31.12.2017 ex82073010 10 Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles 0 % 31.12.2017 ex83016000 ex84139100 ex84199085 ex84389000 ex84689000 ex84769000 ex84799080 ex84819000 ex85030099 ex85159000 ex85319085 ex85369085 ex85439000 ex87089199 ex87089997 ex90319085 10 20 20 10 10 10 87 20 45 20 20 96 50 10 30 30 Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements 0 % 31.12.2015 ex83099090 10 Aluminium can ends with so-called "ring pull" full aperture with a diameter of 136,5 mm (± 1 mm) 0 % 31.12.2018 ex84013000 20 Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors 0 % 31.12.2018 ex84059000 ex87082110 ex87082190 10 10 10 Metal casing for automobile safety belt pre-tension gas generators 0 % 31.12.2014 ex84073320 ex84073380 ex84079080 ex84079090 10 10 10 10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: 0 % 31.12.2017 ex84079010 10 Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of lawnmowers of subheading 843311, mowers with motor of subheading 84332010, rotovators of subheading 84322950, garden shredders of subheading 84368090 or scarifiers of subheading 84322910 0 % 31.12.2016 ex84079090 20 Compact Liquid Petroleum Gas (LPG) Engine System, with: for use in the manufacture of vehicles of heading 8427 0 % 31.12.2015 ex84089041 20 Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems 0 % 31.12.2018 ex84089043 20 Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems 0 % 31.12.2018 ex84089043 ex84089045 ex84089047 30 20 30 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: for use in the manufacture of vehicles of heading 8427 0 % 31.12.2017 ex84089047 40 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: for use in the manufacture of vehicles of heading 8427 0 % 31.12.2018 ex84099100 ex84099900 10 20 Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means 0 % 31.12.2016 ex84099900 ex84799080 10 85 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber 0 % 31.12.2016 ex84119900 30 Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: 0 % 31.12.2017 ex84119900 40 Spiral-shaped gas turbine turbocharger component: 0 % 31.12.2018 ex84119900 50 Actuator for a single-stage turbocharger: 0 % 31.12.2018 ex84137035 20 Single phase centrifugal pump: 0 % 31.12.2015 ex84143081 50 Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment 0 % 31.12.2014 ex84143089 20 Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW 0 % 31.12.2018 ex84145920 30 Axial fan: for use in the manufacture of computers 0 % 31.12.2018 ex84145920 40 Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 8528 0 % 31.12.2015 ex84145980 ex84149000 40 60 Cross-flow fan with: for use in the manufacture of indoor units of split-type air conditioning machines 0 % 31.12.2016 ex84149000 20 Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles 0 % 31.12.2014 ex84149000 30 Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles 0 % 31.12.2018 ex84149000 40 Drive part, for compressors of air conditioning machines of motor vehicles 0 % 31.12.2018 ex84159000 20 Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles 0 % 31.12.2016 ex84189910 50 Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment 0 % 31.12.2014 ex84189910 60 Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment 0 % 31.12.2014 ex84219900 91 Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder 0 % 31.12.2018 ex84219900 93 Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not more than 3700 mm and a diameter of not more than 500 mm 0 % 31.12.2018 ex84223000 ex84798997 10 30 Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges 0 % 31.12.2018 ex84249000 30 Containers of poly(ethylene terephthalate), with a content of 50 ml or more but not more than 600 ml, equipped with a nozzle, of a kind used as a part of mechanical appliances for spraying liquids 0 % 31.12.2018 ex84312000 30 Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427 0 % 31.12.2017 ex84399900 10 Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3000 mm or more and an external diameter of 550 mm or more 0 % 31.12.2018 ex84679900 ex85365011 10 35 Mechanical switches for connecting electrical circuits, with: for use in the manufacture of machines falling within heading 8467 0 % 31.12.2014 ex84778099 10 Machines for casting or for surface modification of plastic membranes of heading 3921 0 % 31.12.2018 ex84798997 40 Isobaric pressure exchanger with a flow rate of not more than 50 m3/h, whether or not with a booster pump 0 % 31.12.2014 ex84798997 ex84799080 50 80 Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line 0 % 31.12.2015 ex84813091 91 Steel check (non-return) valves with: 0 % 31.12.2014 ex84818059 10 Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines 0 % 31.12.2018 ex84818069 60 Four-way reversing valve for refrigerants, consisting of: with a working pressure up to 4,5 MPa 0 % 31.12.2017 ex84818079 20 Solenoid valve device that can withstand a pressure of 875 bar 0 % 31.12.2018 ex84818099 50 Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with: for use in the manufacture of outdoor air conditioning units 0 % 31.12.2016 ex84818099 60 our way valve, consisting of: for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units 0 % 31.12.2016 ex84833038 30 Cylindrical bearing housing: 0 % 31.12.2017 ex84834029 50 Gear set of cycloid gear type with: of a kind used in robot arms 0 % 31.12.2016 ex84834029 60 Epicyclic gearing, of a kind used in driving hand-held power tools with: 0 % 31.12.2018 ex84834051 20 Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 0 % 31.12.2018 ex84834059 20 Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 84331151 0 % 31.12.2018 ex84834090 80 Transmission gearbox, with: for use in the manufacture of goods of heading 8427 0 % 31.12.2015 ex85011099 54 DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated speed of 2260 (± 15 %) rpm or 5420 (± 15 %) rpm, a supply voltage of 1,5 V or 3 V 0 % 31.12.2018 ex85011099 60 DC motor: for use in the manufacture of electric fryers 0 % 31.12.2017 ex85011099 79 DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least – 20 °C to + 70 °C 0 % 31.12.2018 ex85011099 80 DC stepping motor, with: 0 % 31.12.2018 ex85011099 81 DC stepping motor, with an angle of step of 18 ° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 mm × 68 mm, a two phase winding and an output of not more than 5 W 0 % 31.12.2018 ex85011099 82 DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1500 (± 15 %) rpm or 6800 (± 15 %) rpm, a supply voltage of 2 V or 8 V 0 % 31.12.2014 ex85013100 30 DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) 0 % 31.12.2016 ex85013100 40 Permanently excited DC motor with 0 % 31.12.2014 ex85013100 45 DC motors, brushless, with: 0 % 31.12.2018 ex85013100 55 DC motor with commutator, with for driving hand-held power tools 0 % 31.12.2018 ex85013100 60 Brushless DC motor that can revolve counter clockwise (CCW), with: for use in the manufacture of indoor or outdoor units of split-type air conditioning machines 0 % 31.12.2016 ex85013100 65 Fuel cell module containing at least polymer electrolyte membrane fuel cells in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems 0 % 31.12.2018 ex85013100 70 DC motors, brushless, with: of the kind used in power steering systems for cars 0 % 31.12.2017 ex85013300 ex85014080 ex85015350 30 50 10 Electric drive for motor vehicles, with an output of not more than 315 kW, with: 0 % 31.12.2016 ex85015100 ex85015220 30 50 AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6000 rpm, with: 0 % 31.12.2016 ex85016200 30 Fuel cell system 0 % 31.12.2017 ex85030091 ex85030099 31 32 Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring 0 % 31.12.2018 ex85030099 31 Stamped collector of an electric motor, having an external diameter of not more than 16 mm 0 % 31.12.2018 ex85030099 33 Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm 0 % 31.12.2016 ex85030099 34 Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm 0 % 31.12.2016 ex85030099 35 Transmitter resolver for brushless motors of electrical power steering 0 % 31.12.2014 ex85030099 40 Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501 0 % 31.12.2017 ex85043180 20 Transformer for use in the manufacture of inverters in LCD modules 0 % 31.12.2017 ex85043180 30 Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters 0 % 31.12.2018 ex85043180 40 Electrical transformers: for internal use in the manufacture of set top boxes and TVs 0 % 31.12.2017 ex85044082 40 Printed circuit board equipped with a bridge rectifier circuit and other active and passive components: 0 % 31.12.2017 ex85044082 50 Rectifier in a housing with 0 % 31.12.2017 ex85044090 20 Direct current to direct current converter 0 % 31.12.2018 ex85044090 30 Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 85165000 0 % 31.12.2018 ex85044090 40 Semiconductor power modules comprising: 0 % 31.12.2018 ex85044090 50 Drive unit for industrial robot with: 0 % 31.12.2018 ex85044090 60 Transfer moulded semiconductor power module comprising: 0 % 31.12.2018 ex85045095 20 Inductor with an inductance of not more than 62 mH 0 % 31.12.2018 ex85045095 40 Coil choke with: for use in the manufacture of LCD and LED module power boards 0 % 31.12.2015 ex85045095 50 Solenoid coil with 0 % 31.12.2017 ex85049011 10 Ferrite cores, other than for deflection yokes 0 % 31.12.2018 ex85051100 31 Permanent magnet having a remanence of 455 mT (± 15 mT) 0 % 31.12.2018 ex85051100 33 Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15 mm × 10 mm × 2 mm, or in the shape of a disc with a diameter of not more than 90mm, whether or not containing a hole in the centre 0 % 31.12.2018 ex85051100 35 Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications 0 % 31.12.2017 ex85051100 50 Bars specifically shaped, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions: of a kind to be used in the manufacture of electric servomotors for industrial automation 0 % 31.12.2017 ex85051100 60 Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with of a kind used in the manufacture of permanent magnets after magnetisation 0 % 31.12.2017 ex85051100 70 Disc: of a kind used in car loudspeakers 0 % 31.12.2018 ex85051100 80 Articles in the form of a triangle, square or rectangle, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions: 0 % 31.12.2018 ex85051990 30 Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetization with a remanence between 350 mT and 470 mT 0 % 31.12.2018 ex85052000 30 Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles 0 % 31.12.2018 ex85059020 91 Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 8517 0 % 31.12.2018 ex85065090 10 Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V 0 % 31.12.2018 ex85065090 20 Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit 0 % 31.12.2018 ex85065090 30 Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah 0 % 31.12.2018 ex85071020 80 Lead acid starter battery, with: for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls 0 % 31.12.2015 ex85073020 30 Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1 mm), having a nominal capacity of 1000 mAh or more, for use in the manufacture of rechargeable batteries 0 % 31.12.2018 ex85075000 ex85076000 20 20 Rectangular accumulator, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries 0 % 31.12.2018 ex85075000 30 Cylindrical nickel-hydride accumulator, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries 0 % 31.12.2018 ex85076000 25 Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: 0 % 31.12.2017 ex85076000 30 Cylindrical lithium-ion accumulator, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1200 mAh or more, for use in the manufacture of rechargeable batteries 0 % 31.12.2014 ex85076000 35 Lithium-ion rechargeable batteries, with: 0 % 31.12.2017 ex85076000 40 Batteries of ion-lithium electric accumulators rechargeable with: 0 % 31.12.2017 ex85076000 50 Modules for the assembly of batteries of ion lithium electric accumulators with: 0 % 31.12.2017 ex85076000 55 Lithium-ion accumulator in cylindrical form, with: for the manufacture of rechargeable batteries 0 % 31.12.2017 ex85076000 57 Lithium-ion accumulator, cuboid in shape, with: for the manufacture of rechargeable batteries 0 % 31.12.2017 ex85076000 60 Lithium-ion rechargeable batteries, with: put up in packs of 48 modules 0 % 31.12.2015 ex85076000 65 Cylindrical Lithium Ion Cell with 0 % 31.12.2016 ex85076000 70 Rectangular modules for incorporation in lithium-ion rechargeable batteries: 0 % 31.12.2015 ex85076000 75 Rectangular lithium-ion-accumulator, with 0 % 31.12.2016 ex85076000 80 Rectangular lithium-ion-accumulator, with for use in the manufacture of rechargeable batteries for motor vehicles 0 % 31.12.2015 ex85079080 70 Cut plate of nickel-plated copper foil, with: for use in the manufacture of lithium-ion electric vehicle batteries 0 % 31.12.2016 ex85087000 ex85371099 10 96 Electronic circuit card without separate housing for actuating and controlling vacuum cleaner brushes powered by not more than 300 W 0 % 31.12.2015 ex85087000 ex85371099 20 98 Electronic circuit cards that: 0 % 31.12.2015 ex85124000 ex85168020 10 20 Car door mirror heating foil: 0 % 31.12.2018 ex85169000 60 Ventilation sub-assembly of an electric deep-fat fryer: 0 % 31.12.2014 ex85169000 70 Inner pot: for use in the manufacture of an electric fryer 0 % 31.12.2017 ex85182995 30 Loudspeakers of: of a kind used for TV sets and video monitors manufacture 0 % 31.12.2017 ex85183095 20 Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm 0 % 31.12.2018 ex85184080 91 Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality 0 % 31.12.2014 ex85184080 92 Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits 0 % 31.12.2015 ex85189000 91 Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers 0 % 31.12.2018 ex85219000 20 Digital video recorder: for use in the manufacture of Closed-circuit television (CCTV) surveillance systems 0 % 31.12.2014 ex85229049 50 Electronic assembly for a laser read-head of a compact disc player, comprising: the whole mounted on a support 0 % 31.12.2018 ex85229049 ex85279900 ex85299065 60 10 25 Printed circuit board assembly comprising: for use in the manufacture of home entertainment systems 0 % 31.12.2014 ex85229049 ex85279900 ex85299065 65 20 40 Printed circuit board subassembly, comprising: for use in the manufacture of home entertainment systems 0 % 31.12.2014 ex85229049 70 Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit 0 % 31.12.2018 ex85229080 15 Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521 0 % 31.12.2017 ex85229080 ex85299092 30 30 Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players 0 % 31.12.2016 ex85229080 65 Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording 0 % 31.12.2018 ex85229080 70 Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 8521 0 % 31.12.2018 ex85229080 75 Optical reading head for CD player, consisting of one laser diode, one photo detector integrated circuit and one beam splitter 0 % 31.12.2018 ex85229080 80 Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8521, 8526, 8527, 8528 or 8543 0 % 31.12.2018 ex85229080 81 Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least for use in the manufacture of products falling within heading 8521 0 % 31.12.2016 ex85229080 83 Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: for the manufacture of products falling within heading 8521 0 % 31.12.2018 ex85229080 84 Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: 0 % 31.12.2018 ex85229080 85 Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 8521 0 % 31.12.2018 ex85229080 96 Hard disk drive, for incorporation in products of heading 8521 0 % 31.12.2017 ex85229080 ex85299065 97 50 Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under headings 8521 and 8528 0 % 31.12.2016 ex85258019 20 Assembly for television cameras of dimensions of not more than 10 mm × 15 mm × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution of not more than 1024 × 1280 pixels, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 85171200 0 % 31.12.2018 ex85258019 25 Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with: 0 % 31.12.2014 ex85258019 ex85258091 31 10 Closed circuit television (CCTV) camera: for use in CCTV surveillance systems 0 % 01.07.2014 ex85258019 35 Image scanning cameras, using: 0 % 31.12.2014 ex85258019 40 Assembly for cameras used in computer notebooks of dimensions of not more than 15 mm × 25 mm × 25 mm, comprising an image sensor, an objective and a colour processor, having an image resolution of not more than 1600 × 1200 pixels, whether or not fitted with cable and/or housing, whether or not mounted on a base and containing a LED chip 0 % 31.12.2016 ex85258019 45 Camera module with a resolution of 1280 * 720 P HD, with two microphones, for use in the manufacture of products of heading 8528 0 % 31.12.2017 ex85269120 ex85272900 80 10 Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with or without and including for the use in the manufacture of vehicles in Chapter 87 0 % 31.12.2015 ex85279199 ex85299065 10 35 Assembly consisting of at least: 0 % 31.12.2014 ex85284910 10 Video monitor comprising: the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus 0 % 31.12.2018 ex85285970 10 Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less, used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94 0 % 30.06.2014 ex85291080 20 Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing 0 % 31.12.2018 ex85291080 50 Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing 0 % 31.12.2018 ex85291080 60 Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing 0 % 31.12.2018 ex85299065 ex85489090 30 44 Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing 0 % 31.12.2018 ex85299065 45 Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 8527 0 % 31.12.2014 ex85299065 55 Ambient light LED board to be incorporated in goods of heading 8528 0 % 31.12.2015 ex85299065 60 Tuner transforming high frequency signals to mid frequency signals for use in the manufacture of satellite or terrestrial TV receivers for set-top boxes 0 % 31.12.2016 ex85299065 65 Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module 0 % 31.12.2015 ex85299065 70 Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules 0 % 31.12.2016 ex85299065 75 Modules comprising at least semiconductor chips for: 0 % 31.12.2017 ex85299092 25 LCD modules, not combined with touch screen facilities, solely consisting of: for use in the manufacture of radios for motor vehicles 0 % 31.12.2015 ex85299092 32 Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 8528 0 % 31.12.2018 ex85299092 40 Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors 0 % 31.12.2018 ex85299092 41 Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors 0 % 31.12.2018 ex85299092 42 Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets 0 % 31.12.2018 ex85299092 43 Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply 0 % 31.12.2018 ex85299092 44 LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only 0 % 31.12.2018 ex85299092 45 Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats 0 % 31.12.2018 ex85299092 47 Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel 0 % 31.12.2014 ex85299092 48 Aluminium die cast heat sink, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 0 % 31.12.2014 ex85299092 ex85366990 49 83 AC socket with a noise filter, composed of: whether or not equipped with a metal support, which joins the AC socket to the PDP TV set 0 % 31.12.2014 ex85299092 50 Colour LCD display panel for LCD monitors of heading 8528: for use in the manufacture of vehicles of chapter 87 0 % 31.12.2015 ex85299092 70 Rectangular fastening and covering frame: of a kind used for the production of TV sets 0 % 31.12.2017 ex85318095 40 Electro-accoustic transducer 0 % 31.12.2018 ex85359000 20 Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back light units for LCD modules 0 % 31.12.2018 ex85359000 ex85365080 30 83 Semiconductor module switch in a casing: 0 % 31.12.2015 ex85363030 11 Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing 0 % 31.12.2018 ex85364900 91 Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length excluding wires, with a maximum leakage rate of 10–6 cm3 He/sec at one bar in the temperature range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment 0 % 31.12.2018 ex85365011 31 Switch of the printed circuit mount type, operating at a force of 4,9 N (± 0,9 N), contained in a housing 0 % 31.12.2018 ex85365011 32 Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60V and at a current strength of not more than 50mA, for use in the manufacture of products of headings 8521 or 8528 0 % 31.12.2018 ex85365019 91 Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections 0 % 31.12.2018 ex85365019 ex85365080 93 97 Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing 0 % 31.12.2018 ex85365080 81 Mechanical speed governer switches for connecting electrical circuits, with: for use in the manufacture of machines falling within heading 8467 0 % 31.12.2014 ex85365080 82 Mechanical switches for connecting electrical circuits, with: for use in the manufacture of machines falling within heading 8467 0 % 31.12.2014 ex85365080 93 Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V 0 % 31.12.2018 ex85365080 98 Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not more than 250 V and at a current strength of not more than 5 A, for use in the manufacture of products of headings 8521 or 8528 0 % 31.12.2018 ex85366990 51 SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528 0 % 31.12.2017 ex85366990 81 Pitch connector for use in the manufacture of LCD television reception apparatus 0 % 31.12.2017 ex85366990 82 Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least: for use in the manufacture of products falling within headings 8521 or 8528 0 % 31.12.2014 ex85366990 84 Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 0 % 31.12.2015 ex85366990 85 Socket or plug, built into a plastic or metal housing, with no more than 8 pins, for use in the manufacture of products falling within headings 8521 or 8528 0 % 31.12.2016 ex85366990 86 High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528 0 % 31.12.2016 ex85366990 87 D-Subminiature (D-sub) type socket or plug, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8521 or 8528 0 % 31.12.2016 ex85366990 88 Secure Digital (SD), CompactFlash, "Smart Card" and 64- pin PC-card female connectors, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1000 V 0 % 31.12.2017 ex85367000 10 Optical socket or plug, for use in the manufacture of goods falling within headings 8521 or 8528 0 % 31.12.2016 ex85367000 20 Metal plugs, sockets and connectors in plastic or metal housing for optically and mechanically aligning optical fibre cables: for use in the manufacture of products of headings 8521 and 8528 0 % 31.12.2016 ex85369085 92 Metallic stamped frame with connections 0 % 31.12.2018 ex85369085 ex85444993 94 10 Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements 0 % 31.12.2018 ex85369085 97 Secure Digital (SD) type memory card slot, push-push or push-pull type, for use in the manufacture of goods falling within headings 8521 or 8528 0 % 31.12.2016 ex85371091 30 Data processing and evaluation vehicle dashboard control module, operating through the CAN - bus protocol, containing at least: with a voltage of 13,5 V 0 % 31.12.2017 ex85371099 92 Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors 0 % 31.12.2018 ex85371099 93 Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems 0 % 31.12.2018 ex85371099 ex85437090 94 20 Unit consisting of two junction field effect transistors contained in a dual lead frame housing 0 % 31.12.2018 ex85371099 97 Electronic controller card for actuating and controlling of a single-phase electric AC commutator motor, with an output of 750 W or more and an input power of more than 1600 W but not more than 2700 W 0 % 31.12.2015 ex85389099 92 Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 mm × 48 mm 0 % 31.12.2018 ex85389099 95 Copper base plate, of a kind used as a heatsink in the manufacture of IGBT modules of heading 8535 or 8536 with a voltage of 650 V or more but not more than 1200 V 0 % 31.12.2018 ex85393900 20 Cold cathode (CCFL) or external electrode (EEFL) fluorescent lamps, of a diameter of not more than 5 mm and with a length of more than 120 mm but not more than 1570 mm 0 % 31.12.2016 ex85401100 93 Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more 0 % 31.12.2016 ex85402080 91 Photomultiplier 0 % 31.12.2016 ex85407100 20 Continuous wave magnetron with a fixed frequency of 2460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 85165000 0 % 31.12.2018 ex85408900 91 Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons 0 % 31.12.2018 ex85408900 92 Vacuum fluorescent display tube 0 % 31.12.2018 ex85437090 ex94054039 ex94054099 23 50 03 Semiconductor device for the conversion of electrical energy into visible, infra-red or ultra-violet rays: 0 % 31.12.2018 ex85437090 30 Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % 31.12.2018 ex85437090 35 Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % 31.12.2018 ex85437090 40 High-frequency amplifier comprising one or more integrated circuits and discrete capacitor chips on a metal flange in a housing 0 % 31.12.2015 ex85437090 45 Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing 0 % 31.12.2018 ex85437090 55 Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing 0 % 31.12.2018 ex85437090 60 Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing 0 % 31.12.2018 ex85437090 65 Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing 0 % 31.12.2018 ex85437090 80 Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing 0 % 31.12.2018 ex85437090 85 Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % 31.12.2018 ex85437090 95 Mobile telephone view and control module comprising of: for use in the manufacture of vehicles of Chapter 87 0 % 31.12.2015 ex85439000 20 Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips 0 % 31.12.2014 ex85439000 30 Assembly of products falling within heading 8541 or 8542 mounted on a printed circuit, contained in a housing 0 % 31.12.2018 ex85439000 40 Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back 0 % 31.12.2017 ex85442000 ex85444290 ex85444993 ex85444995 10 20 20 10 PET/PVC insulated flexible cable with: 0 % 31.12.2018 ex85444290 10 Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with: used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits 0 % 31.12.2018 ex85444290 30 PET insulated electric conductor with: for use in the manufacture of products falling within headings 8521 and 8528 0 % 31.12.2017 ex85451900 20 Carbon electrodes, for use in the manufacture of zinc-carbon batteries 0 % 31.12.2018 ex85459090 20 Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes 0 % 31.12.2015 ex85471000 10 Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters 0 % 31.12.2018 ex85481029 10 Spent lithium-ion or nickel metal hydride electric accumulators 0 % 31.12.2016 ex85489090 41 Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing 0 % 31.12.2018 ex85489090 43 Contact image sensor 0 % 31.12.2018 ex85489090 47 Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 440 nm or more but not more than 660 nm, contained in a lead frame housing whose exterior dimensions - without fittings – do not exceed 12 mm × 12 mm 0 % 31.12.2018 ex85489090 48 Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm 0 % 31.12.2018 ex85489090 49 LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only 0 % 31.12.2018 ex85489090 50 Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528 0 % 31.12.2017 ex87042391 20 Motor chassis with a self-ignition capacity of at least 8000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm 0 % 31.12.2017 ex87083091 10 Drum type parking brake: for use in the manufacture of motor vehicles 0 % 31.12.2015 ex87089997 20 Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles 0 % 31.12.2016 ex88033000 50 Pre-formed helicopter rotor shafts: 0 % 31.12.2016 ex90011090 10 Image reverser made up from an assembly of optical fibres 0 % 31.12.2018 ex90011090 30 Polymer optical fibre with: of a kind used in the manufacture of polymer fibre cables 0 % 31.12.2016 ex90012000 10 Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film 0 % 31.12.2017 ex90012000 ex90019000 20 55 Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut 0 % 31.12.2018 ex90019000 21 Multi-Optical-Path (MOP) film, in rolls, based on poly(ethylene terephthalate) (PET) material: 0 % 31.12.2014 ex90019000 25 Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % 31.12.2017 ex90019000 35 Rear projection screen, comprising a lenticular plastic plate 0 % 31.12.2018 ex90019000 45 Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends 0 % 31.12.2018 ex90019000 60 Reflector or diffuser sheets in rolls 0 % 31.12.2018 ex90019000 65 Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens 0 % 31.12.2014 ex90019000 70 Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90 ° and a prism pitch of 50 μm 0 % 31.12.2016 ex90019000 75 Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules 0 % 31.12.2017 ex90019000 85 Light guide panel made of poly(methyl methacrylate): for use in the manufacture of backlight units for flat screen TVs 0 % 31.12.2015 ex90021100 10 Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not more than 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors 0 % 31.12.2018 ex90021100 20 Lenses of a kind used for the production of visualizers or live image cameras 0 % 31.12.2017 ex90021100 30 Lenses of a kind used for the production of visualizers or live image cameras 0 % 31.12.2017 ex90021100 40 Lenses of a kind used for the production of visualizers or live image cameras 0 % 31.12.2017 ex90021100 50 Lens unit, having a focal length of 25 mm or more but not more than 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm 0 % 31.12.2018 ex90021100 70 Lenses of a kind used for the production of visualizers or live image cameras 0 % 31.12.2017 ex90022000 10 Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 0 % 31.12.2018 ex90029000 20 Lens, mounted, having a fixed focal length of 3,8 mm (± 0,19 mm) or 8 mm (± 0,4 mm), with a relative aperture of F2.0 and a diameter of not more than 33 mm, for use in the manufacture of charged-coupled (CCD) cameras 0 % 31.12.2018 ex90029000 30 Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates 0 % 31.12.2018 ex90029000 40 Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % 31.12.2017 ex90129090 10 Energy filters, to be installed on the column of electron microscopes 0 % 31.12.2016 ex90132000 10 Carbon dioxide laser, stimulated by high frequency, having an output power of 12 W or more, but not more than 200 W 0 % 31.12.2018 ex90132000 20 Laser head assemblies for use in the manufacture of measuring or checking machines for semiconductor wafers or devices 0 % 31.12.2018 ex90132000 30 Laser for use in the manufacture of measuring or checking machines for semiconductor wafers or devices 0 % 31.12.2018 ex90229000 10 Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, with an active surface of 409,6 mm2 × 409,6 mm2 and a pixel size of 200 μm2 × 200 μm2 0 % 31.12.2018 ex90258040 30 Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of 0 % 31.12.2018 ex90271090 10 Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing 0 % 31.12.2018 ex90291000 20 Device for measuring wheel speed in vehicles (semi-conductor wheel speed sensor), consisting of: for detecting the movement of a pulse generator 0 % 31.12.2018 ex90318034 30 Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing 0 % 31.12.2018 ex90318038 10 Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing 0 % 31.12.2018 ex90318038 20 Electronic semiconductor accelerometer in a housing, mainly consisting of to be fitted in products under chapter 84 - 90 and 94 0 % 31.12.2018 ex90319085 20 Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing 0 % 31.12.2018 ex90328900 20 Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm 0 % 31.12.2018 ex90328900 30 Electronic controller of electric power steering (EPS controller) 0 % 31.12.2018 ex90328900 40 Digital valve controller for controlling liquids and gases 0 % 31.12.2017 ex94019080 10 Ratchet disk of a kind used in the manufacture of reclining car seats 0 % 31.12.2015 ex94019080 20 Sidemember with a thickness of 0,8 or more but not more than 3,0 mm, used in the manufacture of reclining car seats 0 % 31.12.2018 ex94019080 30 Steel bracket for mounting safety features seats with thickness of 1 mm or more but not more than 2,5 mm used in the manufacture of reclining car seats 0 % 31.12.2018 ex94019080 40 Steel handles for controlling the seat adjustment mechanism used in the manufacture of reclining car seats 0 % 31.12.2018 ex94054035 10 Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more but not more than 600 mm (± 1 mm), for the manufacture of goods of heading 8528 0 % 31.12.2018 ex94054039 10 Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a light engine of a series of 3 or more but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set 0 % 31.12.2018 ex94054039 20 LED array of white silicone, containing: 0 % 31.12.2018 ex94054039 60 LED components (equipped with light emitting diodes) fitted with 0 % 31.12.2018 ex94054099 06 LED components (equipped with light emitting diodes) fitted with 0 % 31.12.2018 ex95030075 ex95030095 10 10 Plastic cable car scale models, whether or not with a motor, for printing 0 % 31.12.2015 ex96089100 10 Non-fibrous plastic pen-tips with an internal canal 0 % 31.12.2018 ex96089100 20 Felt tips and other porous-tips for markers, without internal canal 0 % 31.12.2018 ex96121010 10 Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation) 0 % 31.12.2018

industrial monocarboxylic fatty acids of subheading 38231910,

methyl esters of fatty acids of heading 2915 or 2916,

fatty alcohols of subheadings 290517, 290519 and 382370 used for the manufacture of cosmetics, washing products or pharmaceutical products,

fatty alcohols of subheading 290516, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,

stearic acid of subheading 38231100 or

goods of heading 3401

of the Genus Malpighia spp.,

with a sugar content by weight of more than 13 % but not more than 30 %

of the Genus Musa cavendish,

with a sugar content by weight of more than 13 % but not more than 30 %

of the Genus Mangifera spp.,

with a sugar content by weight of not more than 30 %

of the Genus Carica spp.,

with a sugar content by weight of more than 13 % but not more than 30 %

of the Genus Psidium spp.,

with a sugar content by weight of more than 13 % but not more than 30 %

not from concentrate,

of the genus Mangifera,

of a Brix value of 14 or more, but not more than 20

more than 6 % of salt concentration,

0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and

whether or not but not more than 2000 mg/kg of sodium benzoate according CODEX STAN 192-1995

not from concentrate,

of the genus Ananas,

of a Brix value of 11 or more but not more than 16,

with a Brix value of more than 20 but not more than 67,

a value of more than EUR 30 per 100 kg net weight,

containing added sugars

of a Brix value of 40 or more but not more than 66,

in immediate packings of a content of 50 litres or more

with a Brix value of more than 48 but not more than 67,

in immediate packings of a content of 50 litres or more

of the species Euterpe oleracea,

frozen,

not sweetened,

not in powder form,

of a Brix value of 23 or more but not more than 32,

more than 30 % but not more than 35 % licorice extract,

more than 65 % but not more than 70 % tricaprylin,

94 % or more, but not more than 98,5 % of α-Al2O3 (CAS RN 1344-28-1),

2 % (± 1,5 %) of magnesium spinel (CAS RN 1309-48-4),

1 % (± 0,6 %) of yttrium oxide (CAS RN 1314-36-9),

either 2 % (± 1,2 %) of lanthanum oxide (CAS RN 1312-81-8)

or 2 % (± 1,2 %) of lanthanum oxide (CAS RN 1312-81-8) and neodymium oxide (CAS RN 1313-97-9)

of a purity by weight of 99,9 % or more,

with an average grain-size of 1,2 μm or more but not more than 1,8 μm

with a specific surface of 5,0 m2/g or more, but not more than 7,5 m2/g

not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium),

not more than 0,01 % of phosphorus (expressed as elemental phosphorus),

2 mg/kg or more of arsenic,

200 mg/kg or more of calcium,

200 mg/kg or more of chlorides,

20 mg/kg or more of iron,

150 mg/kg or more of magnesium,

20 mg/kg or more of heavy metals,

300 mg/kg or more of potassium,

300 mg/kg or more of sodium,

200 mg/kg or more of sulphates,

a purity by weight of 98 % or more and

not more than 10ppm iron

600 ppm by weight of 1,1,2,2-tetrafluoroethane,

2 ppm by weight of pentafluoroethane,

2 ppm by weight of chlorodifluoromethane,

2 ppm by weight of chloropentafluoroethane,

2 ppm by weight of dichlorodifluoromethane

0,001 mg/kg or less of tetrachlorodibenzodioxines,

0,001 mg/kg or less of tetrachlorodibenzofurans,

0,2 mg/kg or less of tetrachlorobiphenyls

40 % (± 2 %) by weight of tetrapropylammonium hydroxide,

0,3 % by weight or less of carbonate,

0,1 % by weight or less of tripropylamine,

500 mg/kg or less of bromide and

25 mg/kg or less of potassium and sodium taken together

35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,

not more than 1000 mg/kg of chloride,

not more than 2 mg/kg of iron and

not more than 10 mg/kg of potassium

C.I. Disperse Orange 61,

C.I. Disperse Blue 291:1,

C.I. Disperse Violet 93:1,

C.I. Disperse Red 54

N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0)

N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) and

N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)

lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1),

C.I. Acid Green 25 (CAS RN 4403-90-1) and

C.I. Acid Blue 80 (CAS RN 4474-24-2)

72 % (± 2 %) of mica (CAS RN 12001-26-2) and

28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)

not more than 85 % by weight of silver,

not less than 2 % by weight of palladium,

barium titanate,

terpineol, and

ethyl cellulose,

of a thickness of 0,3 μm or more but not more than 10 μm, and

coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)

(65 ± 10) % of γ-butyrolactone,

(30 ± 10) % of polyamide resin,

(3,5 ± 1,5) % of naphthoquinone ester derivative and

(1,5 ± 0,5) % of arylsilicic acid

styrene

alkoxystyrene

alkylacrylates

methyl 8′-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3′-naphtho[2,1-b][1,4]oxazine]-9′-carboxylate,

methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol,

ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol

consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),

with a total solid content by weight of 55 % or more, but not more than 57 %, and

with a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,

5 % or more, but not more than 10 % of amorphous silicon dioxide or

3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

wax;

a vinyl-based polymer and

a colouring agent

by weight not more than 12 % of diazooxonapthtalenesulphonic acid ester

phenolic resins

phenolic or acrylic resins

a maximum 2 % by weight of light sensitive acid precursor,

acrylate polymers,

methacrylate polymers,

derivatives of styrene polymers,

not more than 10 % by weight of naphthoquinonediazide esters,

2 % or more but not more than 20 % by weight of copolymers of hydroxystyrene

not more than 7 % by weight of epoxy-containing derivatives

55 % or more but not more than 75 % by weight of xylene and

12 % or more but not more than 18 % by weight of ethylbenzene

20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,

25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,

5 % or more but not more than 30 % of acrylates,

not more than 12 % of a photoinitiator

styrene acrylate/butadiene copolymer

either carbon black or an organic pigment

whether or not containing polyolefin or amorphous silica

2-methoxy-1-methylethyl acetate (CAS RN 108-65-6)

1-methoxypropan-2-ol (CAS RN 107-98-2)

ethyl lactate (CAS RN 97-64-3)

2 % of halogen-free alkyl sulphonic acid, and

5 % of a fluorinated polymer

a dry layer of a photosensitive acrylic resin,

on one side a poly(ethylene terephthalate) protecting foil and

on the other side a polyethylene protecting foil

containing 60 % or more but not more than 75 % by weight of rosin,

with an acid value of not more than 25,

Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,

Bacillus thuringiensis subsp. kurstaki or,

Bacillus thuringiensis subsp. israelensis or,

Bacillus thuringiensis subsp. aizawai or,

Bacillus thuringiensis subsp. tenebrionis

24 % or more but not more than 26 % of pyrithione zinc (INN), or

39 % or more but not more than 41 % of pyrithione zinc (INN)

30 % or more of tepraloxydim (ISO) and

not more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons

38,8 % or more but not more than 41,2 % of Gibberellin A3, or

9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7

1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine

1,8 % of sodium para-nitrophenolate,

1,2 % of sodium ortho-nitrophenolate,

0,6 % of sodium 5-nitroguaiacolate

3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 % and

containing less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene

55 % or more of Gibberellin A4,

1 % or more but not more than 35 % of Gibberellin A7,

90 % or more of Gibberellin A4 and Gibberellin A7 combined

not more than 10 % of a combination of water and other naturally occurring Gibberellins

70 % or more, but not more than 90 % of tin

not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium

4,9 % of 1,2,4-trimethyl-benzene,

4,9 % of naphthalene, and

0,5 % of 1,3,5-trimethyl-benzene

based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

containing mineral oils,

based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,

with a total base number (TBN) of 280 or more but not more than 320,

containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

containing mineral oils,

with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,

with a total base number (TBN) of more than 20,

bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)

more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2);

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);

polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3)

bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and

methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)

25 % or more but not more than 50 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)

not more than 20 % of other organic compounds

on a carrier of polypropylene (CAS RN 9003-07-0)

80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and

20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate

2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and

either N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or

N,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)

2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),

2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and

2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)

branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and

1-methoxy-2-propyl acetate (CAS RN 108-65-6)

a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and

either an o-hydroxyphenyl triazine UV light absorber or

a chemically modified phenolic compound

69 % or more but not more than 71 % of 1-methoxypropan-2-ol,

29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate

20 % or more but not more than 30 % of titanium and

55 % or more but not more than 72 % of chlorine

tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride; and

silicon dioxide

containing 6,6 % (± 0,6 %) by weight of magnesium, and

containing 2,3 % (± 0,2 %) by weight of titanium

4 % or more but not more than 10 % of titanium and

10 % or more but not more than 20 % magnesium

35 % or more but not more than 60 % of eicosylbenzene,

25 % or more but not more than 50 % of docosylbenzene,

5 % or more but not more than 25 % of tetracosylbenzene

88 % or more but not more than 98 % of hexadecylnaphthalene

2 % or more but not more than 12 % of dihexadecylnaphthalene

industrial monocarboxylic fatty acids of subheading 3823,

stearic acid of subheading 3823,

stearic acid of subheading 2915,

palmitic acid of subheading 2915, or

animal feed preparations of subheading 2309

industrial monocarboxylic fatty acids of subheading 3823

stearic acid of subheading 3823

stearic acid of subheading 2915

palmitic acid of subheading 2915

animal feed preparations of subheading 2309

on a support of mineral wax, whether or not modified chemically, or

in the form of a solution in an organic solvent

40 % or more but not more than 58 % of beta-sitosterols

20 % or more but not more than 28 % of campesterols

14 % or more but not more than 23 % of stigmasterols

0 % or more but not more than 15 % of other sterols

either an aluminium-alkyl compound,

or an organic complex of tungsten

or an organic complex of molybdenum

76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2)

4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1) and

2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9)

85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and

5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate

basic zirconium carbonate (CAS RN 57219-64-4) and

cerium carbonate (CAS RN 537-01-9)

trioctylphosphine oxide (CAS RN 78-50-2),

dioctylhexylphosphine oxide (CAS RN 31160-66-4),

octyldihexylphosphine oxide (CAS RN 31160-64-2) and

trihexylphosphine oxide (CAS RN 9084-48-8)

3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) and

ethyl-6′-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9′-[9H]xanthene]-2′-carboxylate (CAS RN 154306-60-2)

dipropylene glycol

tripropylene glycol

tetrapropylene glycol and

pentapropylene glycol

either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,

or 30 % or more of lead and 5 % or more of niobium,

75 % or more of sterols,

not more than 25 % of stanols,

either diethylene glycol, dodecandioic acid and ammonia water,

or N,N-dimethylformamide,

or γ-butyrolactone,

or silicon oxide,

or ammonium hydrogen azelate,

or ammonium hydrogen azelate and silicon oxide,

or dodecandioic acid, ammonia water and silicon oxide,

0,1 % or more but not more than 1 % of platinum, and

0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)

C,C′-azodi(formamide) (CAS RN 123-77-3),

magnesium oxide (CAS RN 1309-48-4) and

zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)

85 % or more of zinc diacrylate (CAS RN 14643-87-9)

and not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7)

50 % (± 2 %) by weight of bis-alkoxylated ethyl acetoacetate aluminium chelates,

in an ink oil (white mineral) solvent

either 1,6mm or more but not more than 3,4mm,

or 4mm or more but not more than 6mm

89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol

0,1 % or more but not more than 1 % of colorants

1 % or more but not more than 10 % of fluoropolymers

60 % or more, but not more than 80 % of sitosterols,

not more than 15 % of campesterols,

not more than 5 % of stigmasterols,

not more than 15 % of betasitostanols

1 % or more but not more than 40 % of molybdenum oxide,

10 % or more but not more than 50 % of nickel oxide,

30 % or more but not more than 70 % of tungsten oxide

75 % or more, but not more than 85 % of copper,

inorganic oxides,

ethyl cellulose, and

a solvent

a melting point of between 1600 °C and 1800 °C,

a density of 0,6 - 0,8 g/cm3,

65 % or more but not more than 75 % of C12 FAME,

21 % or more but not more than 28 % of C14 FAME,

4 % or more but not more than 8 % of C16 FAME,

50 % or more but not more than 58 % of C8-FAME

35 % or more but not more than 50 % of C10-FAME

15 % or more but not more than 32 % of C16 FAME

65 % or more but not more than 85 % of C18 FAME

containing 27,8 % or more but not more than 29,3 % by weight of vinyl acetate

with a melt flow index of 22 g/10 min or more but no more than 28 g/10 min

containing not more than 15 mg/kg vinyl acetate monomer

containing 9,8 % or more but not more than 10,8 % by weight of vinyl acetate

with a melt flow index of 2,5 g/10 min or more but no more than 3,5 g/10 min

containing not more than 15 mg/kg vinyl acetate monomer

with a specific gravity of 0,862 or more, but not more than 0,865,

able to stretch to at least 200 % its original length,

with a hysteresis of 50 % (± 10 %),

with permanent deformation of not more than 20 %,

7 mg/kg of aluminium,

2 mg/kg of iron,

1 mg/kg of magnesium,

8 mg/kg of chloride

of a melting point of more than 150 °C (as determined by the ASTM D 3 417 method),

of a heat of fusion of 15 J/g or more but not more than 70 J/g,

of an elongation at break of 1000 % or more (as determined by the ASTM D 638 method),

of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)

of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method);

of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method);

of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method);

with 40 % or more but not more than 80 % by weight of polypropylene,

with 10 % or more but not more than 30 % by weight of glass fibre,

with 10 % or more but not more than 30 % by weight of mica

a density of 0,880 g/cm3 or more but not more than 0,913 g/cm3(as determined by test method ASTM D1505),

a tensile strength at yield of 350 kg/cm2 or more but not more than 390 kg/cm2 (as determined by test method ASTM D638)

a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648)

a copolymer of propylene and ethylene and

21 % (± 3 %) by weight of polystyrene

a flashpoint of 250 °C or more,

a viscosity index of 150 or more,

of a number average molecular weight (Mn) of 650 or more

liquid at room temperature

obtained by cationic polymerisation of C-5 alkenes monomers

with a number average molecular weight (Mn) of 370 (± 50)

with a weight average molecular weight (Mw) of 500 (± 100)

70 (± 5) % of styrenic block copolymer,

15 (± 5) % of polyethylene wax, and

15 (± 5) % of tackifier resin

able to stretch to at least 200 % of its original length

with a hysteresis of 50 (± 10) %

with a permanent deformation of no more than 20 %

a specific gravity of 1,05 (± 0,02),

a melt flow index at 200 °C/5 kg of 13 g/10 min (± 1 g/10 min)

2 % or more but not more than 4 % of tris(tribromophenyl) triazine,

5 % or more but not more than 10 % of ethane-1,2-bis(pentabromophenyl),

3 % or more but not more than 5 % of antimony trioxide

with a melting point of 240 °C or more but not more than 260 °C,

containing 5 % or more but not more than 15 % by weight of p-methylstyrene

minimum 65 % styrene,

maximum 25 % divinylbenzene

45 % or more but not more than 65 % of polymers of styrene

35 % or more but not more than 45 % of poly(phenylene ether)

not more than 10 % of other additives

metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment

fluorescent, as characterized by emitting light during absorption of ultraviolet radiation

bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale

a degree of polymerisation of 1000 (± 300) monomer units,

a coefficient of heat transmission (K-value) of 60 or more, but not more than 70,

a volatile material content of less than 2,00 % by weight,

a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight,

80,5 % or more but not more than 81,5 % of vinyl chloride,

16,5 % or more but not more than 17,5 % of vinyl acetate and

1,5 % or more but not more than 2,5 % of maleic acid,

87 % or more but not more than 92 % of vinyl chloride,

2 % or more but not more than 9 % of vinyl acetate and

1 % or more but not more than 8 % of vinyl alcohol,

9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and

5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol

a viscosity of not more than 50000 Pa·s at 120 °C as determined by the test method ASTM D 3835

a weight average molecular weight (Mw) of more than 500000 but not more than 1200000 according to the Gel Permeation Chromatography (GPC) test,

a residual monomer content of less than 1 %

a melting point of 96 °C (± 3 °C),

a specific gravity of 1,03 or more but not more than 1,07, and

25 % or more but not more than 50 % of acrylonitrile-butadiene-styrene, and

50 % or more but not more than 75 % of methylmethacrylate

chloromethyl vinyl ether,

chloroethyl vinyl ether,

chloromethylstyrene,

vinyl chloroacetate,

methacrylic acid,

butenedioic acid monobutyl ester,

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)

a zinc borate hydrate content of not more than 40 % by weight,

a diantimony trioxide content of not more than 5 % by weight

containing 7 % or more but not more than 15 % by weight of non halogen flame retardant, and

with a specific gravity of 1,20 (± 0,01)

77 % or more but not more than 90 % of polycarbonate,

8 % or more but not more than 20 % of phosphoric acid ester,

0,1 % or more but not more than 1 % of antioxidant, and

a melt flow rate of 18 g/10 min/300 °C/1,2 kg (according to ASTM D 1238)

a tensile strength of 69 MPa according to ASTM D 638 and

a flexural strength of 112 MPa according to ASTM D 790

a specific gravity of 1,20 (± 0,05),

a heat deflection temperature of 146 °C (± 3 °C) at 4,6 kgf/cm2, and

a melt flow index of 20 (± 10) g/10 min at 300 °C/1,2 kg

65 % or more but not more than 90 % of polycarbonate,

5 % or more but not more than 15 % of acrylonitrile-butadiene-styrene,

5 % or more but not more than 20 % of phosphoric acid ester and,

0,1 % or more but not more than 5 % of antioxidant

a copolymer obtained from poly(ethylene terephthalate), pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene

a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and

organic dyes and/or organic and inorganic pigments

with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, and

containing not more than 10 % by weight of other modifiers or additives

not more than 75 μm of polyethylene,

not more than 50 μm of polyamide,

not more than 15 μm of polyethylene terephthalate and

not more than 9 μm of aluminium

a copolymer obtained from poly(ethyleneterephthalate), pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene

a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and

organic dyes and/or organic and inorganic pigments

hexanedioic acid

12-aminododecanoic acid

hexahydro-2H-azepin-2-one, and

1,6-hexanediamine

alkylphenol - formaldehyde resin, whether or not brominated, and

zinc oxide

phenolic resin polymer (CAS RN 9003-35-4) with 80 % by weight or more but not more than 90 %

phenol (CAS RN 108-95-2) with not more than 5 % and

hexamethylenetetramine (CAS RN 100-97-0) with 5 % by weight or more but not more than 15 %

60 % or more of two-functional acrylated polyurethane oligomers and

30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and

10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates

an iodine value of more than 120 and

a Gardner Colour of more than 10 for the pure product or

a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)

containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and

of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method),

35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch,

5 % or more but less than 16 % polyvinyl alcohol,

10 % or more but less than 46 % of polyol plasticisers,

0,25 % or more but less than 3 % of stearic acid,

whether or not containing 30 % (± 10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer

titanium dioxide

poly(methyl methacrylate)

calcium carbonate

binding agents

polyamide-6 or poly(epoxy anhydride)

7 % or more but not more than 9 % of polytetrafluorethylene if present

10 % or more but not more than 25 % of inorganic fillers

coated with non-vulcanised natural or synthetic rubber

with a width of 20 mm or more but not more than 40 mm

containing silicone, aluminium hydroxide, acryl and urethane

a polycarbonate or acrylic polymer film totally embossed on one side in a regular shaped pattern,

covered on both sides with one or more layers of plastic material,

whether or not covered on one side with a self-adhesive layer and a release sheet

poly(vinyl chloride);

polyurethane with, on one side, imprints against counterfeiting, alteration or substitution of data or duplication, and on the other side, a layer of glass microspheres;

a layer incorporating a security and/or official mark which changes appearance with angle of view;

metallized aluminium;

and adhesive, covered on one side with a release liner

coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and

on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner

with a thickness of 110 μm or more,

with a surface resistance of between 102-1014 ohms as determined by test method ASTM D 257,

coated on one side with an acrylic pressure sensitive adhesive

with a thickness of 100 μm or more,

an elongation at break of not more than 100 %,

coated on one side with a pressure sensitive silicon adhesive

with a gloss of more than 30 degrees according to ASTM D2457,

whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner

of a thickness of 100 μm or more,

coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester liner

with pressure sensitive silicone polymer adhesive,

of a total thickness of not more than 0,7 mm,

of a total width of 1 cm or more, but not more than 1 m,

whether or not in rolls

with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces,

of a total thickness of 0,025 mm or more, but not more than 0,7 mm, and

of a total width of 6 cm or more, but not more than 1 m,

whether or not in rolls,

showing a regular pattern,

with or without an application tape layer,

consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) containing microprisms,

whether or not containing an additional layer of polyester and

an adhesive with a final release sheet

self-adhesive on one side,

of a total thickness of 0,025 mm or more, but not more than 0,09 mm,

of a total width of 60 mm or more, but not more than 1110 mm,

a copolymer of acrylic resin,

polyurethane,

a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,

glass microspheres, and

an adhesive layer, with a release liner on one or both sides

self-adhesive on both sides,

of a total thickness of 0,04 mm or more, but not more than 1,25 mm,

of a total width of 5 mm or more but not more than 1205 mm

of a thickness of 65 μm or more,

coated on one side with an acrylic UV-sensitive adhesive and a polyester liner

free from impurities or faults,

coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,

whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,

with a total thickness without the liner of 54 μm or more but not more than 64 μm, and

a width of more than 1295 mm but not more than 1305 mm

with a gloss of more than 20 degrees as determined by test method ASTM D2457,

whether or not covered on one side with a protective poly(ethylene terephthalate) film and on the other side with a pressure sensitive adhesive with channels and a release liner

consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,

covered on both sides with one or more layers of plastic material and

covered on one side with an adhesive layer and a release sheet

a layer of polyurethane containing glass micro beads,

a layer of poly(ethylene vinyl acetate),

an adhesive layer, and

a release sheet

whether or not with a pressure or heat sensitive adhesive layer

whether or not with a release film

with a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together

with a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83)

with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 gm2) with pressure sensitive layer

with a thickness of 78 μm or more,

covered on one side with an adhesive layer and with a release sheet,

with an adhesive strength of 1764 mN / 25 mm or more

a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide,

whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions,

not more than 6 % by weight of other additives,

a pressure sensitive adhesive; and

covered on one side with a release liner,

whether or not with a separate self-adhesive over laminate protective film,

of a total thickness of not more than 400 μm

containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or more

having on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2

coated on the other side with a pressure sensitive adhesive and a release liner

a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent,

a second layer containing a maleic anhydride copolymer,

a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,

a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,

a pressure sensitive adhesive; and

covered on one side with a release liner

whether or not with a separate self-adhesive over laminate protective film

of a total thickness of not more than 400 μm

with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride),

on one side covered with a layer of poly(vinyl fluoride),

whether or not with a pressure sensitive adhesive layer and a release film on the other side,

with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together,

with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), and

with a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer

a poly(vinyl chloride) layer,

a polyurethane layer,

a glass microspheres layer,

a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view,

a metallised aluminium layer, and

an adhesive, covered on one side with a release liner

each layer containing a mixture of polypropylene and polyethylene,

containing not more than 3 % by weight of other polymers,

whether or not containing titanium dioxide in the core layer,

coated with an acrylic pressure sensitive adhesive and

with a release liner

of an overall thickness of not more than 110 μm

an embossed polyester layer,

a caprolactone-cyclohexylene isocyanate copolymer layer,

a pressure sensitive adhesive

having a minimum reflectance of 93,5 % as determined by ASTM G173-03,

covered on one side with a removable layer of polyethylene,

covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner

an acrylic adhesive layer with a thickness of 20 μm or more but not more than 70 μm,

a polyurethane based layer with a thickness of 100 μm or more but not more than 300 μm

is repetitive and equally spaced along the length of the film

is equally and visibly aligned when viewed from the back or front of the film

a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

covered on either side with two or more layers of polymeric material,

a raised relief surface with embossed undulations, and

a thickness of more than 0,125 mm

with the thickness of not more than 0,1 mm,

printed on both sides with specialised coatings to allow banknote security printing

with a thickness of not more than 30 μm,

of a width of not more than 210 mm,

conforming to ASTM D882,

a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

covered on either side with two or more layers of polymeric material,

a tensile strength in the machine direction of 140 MPa or more but not more than 270 MPa and

a tensile strength in the transverse direction of 20 MPa or more but not more than 40 MPa

a thickness of 55 μm or more but not more than 97 μm,

a tensile modulus in the machine direction of 0,75 GPa or more but not more than 1,45 GPa, and

a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,55 GPa

each layer containing a mixture of polypropylene and polyethylene,

containing not more than 3 % by weight of other polymers,

whether or not containing titanium dioxide in the core layer,

of an overall thickness of not more than 70 μm

flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94)

dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149)

tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882)

tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882)

density range of 0,988 g/cm3 or more but not more than 1,035 g/cm3 (as determined by ASTM D792)

moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570)

containing by weight 45 % or more of fillers

on a support

a copolymer of acrylic resin

polyurethane

a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use

glass microspheres, and

a permanent liner of poly(ethyleneterephthalate)

only dyed in the mass, or

dyed in the mass and metallised on one side

coated on both sides with a layer of epoxy acrylic resin,

of a total thickness of 37 μm (± 3 μm)

coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,

with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,

with a light transmission of more than 93 %,

with a haze value of not more than 1,3 %,

with a total thickness of 10 μm or more but not more than 350 μm,

with a width of 800 mm or more but not more than 1600 mm

of a thickness of not more than 20 μm,

coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticizer,

with a thickness of 0,73 mm or more but not more than 1,50 mm

either 14,5 % or more but not more than 17,5 % of dihexyl adipate,

or 14,5 % or more but not more than 28,5 % of dibutyl sebacate

a visible light transmission of 50 % or more,

coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

of a thickness of not more than 20 μm,

coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

a thickness of 5 μm or more, but not more than 14 μm,

a width of 478 mm or more, but not more than 532 mm,

a tensile strength at break of 78 MPa or more (as determined by JIS C-2318 for a film thickness of 50 μm),

an elongation at break of 50 % or more (as determined by JIS C-2318 for a film thickness of 50 μm),

a glass transition point (Tg) of 226 °C,

a continuous service temperature of 180 °C (as determined by UL-746 B for a film thickness of 50 μm),

a flammability of VTM-0 (as determined by UL 94 for a film thickness of 25 μm)

poly (tetramethylene ether glycol),

bis (4-isocyanotocyclohexyl) methane,

1,4-butanediol or 1,3-butanediol,

with a thickness of 0,25 mm or more but not more than 5,0 mm,

embossed with a regular pattern on one surface,

and covered with a release sheet

with a gloss of more than 90 degrees according to ASTM D2457

covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer

covered on the other side with a protective poly(ethylene terephthalate) film

with a total thickness of more than 204 μm but not more than 244 μm

not self-adhesive,

an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),

a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),

a total thickness of 0,38 mm or more, but not more than 7,6 mm,

a width of 99 cm or more, but not more than 305 cm,

of a total thickness of 2 mm or more, but not more than 9 mm,

of a total width of 12 mm or more, but not more than 65 mm,

microspheres with a coating of metal, whether or not alloyed with gold,

an adhesive layer,

with a protective layer of silicone or poly(ethylene terephthalate) on one side,

with a protective layer of poly(ethylene terephthalate) on the other side, and

with a width of 5 cm or more but not more than 100 cm

with a length of not more than 2000 m

with a thickness of 2,29 mm (± 0,25 mm),

surface-treated with a foraminous adhesion promoter, and

laminated to a polyester film and a layer of textile material

polyamide-6 or poly(epoxy anhydride)

7 % or more but not more than 9 % of polytetrafluorethylene if present

10 % or more but not more than 25 % of inorganic fillers

469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or

469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or

546,1 mm (± 2 mm) × 622,3 mm (± 2 mm

a flow of not more than 3,6 mm (as determined by IPC-TM 650.2.3.17.2), and

a glass transition temperature (Tg) of more than 170 °C (as determined by IPC-TM 650.2.4.25)

a layer of poly(ethylene terephthalate),

a layer of aluminium,

a layer of polypropylene,

with a width of not more than 275 mm,

a total thickness of not more than 165 μm, and

conforming to ASTM D1701-91 and ASTM D882-95A

consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

having non porous, abrasion resistant or impact resistant surface properties,

fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

with or without a gasket seal,

with aluminium bosses at both ends,

wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin,

of a diameter of 213 mm or more, but not more than 368 mm,

a length of 860 mm or more, but not more than 1260 mm and

a capacity of 18 litres or more, but not more than 50 litres

a silver-colour acrylic paint, and

a transparent scratch-resistant paint

of acrylonitrile-butadiene-styrene with or without polycarbonate,

coated with a copper, a nickel and a chrome layers,

with a total thickness of coating of 5,54 μm or more but not more than 22,3 μm

a poly(ethylene terephthalate) core, and

an outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),

measuring 6 decitex or more but not more than 10 decitex,

of a strength of 3,5 cN/dtex or more

of a diameter of 30 μm or more

of a thickness of 200 μm or more but not more than 280 μm and

of a weight of 20g/m2 or more but not more than 50g/m2

weighing 30 g/m2 or more, but not more than 60 g/m2,

containing fibres of polypropylene or of polypropylene and polyethylene,

whether or not printed, with:

on one side, 65 % of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,

and on other side a smooth untextured surface,

with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,

with a weight of not more than 150 g/m2,

in the piece or simply cut into squares or rectangles, and

not impregnated

of a weight of more than 80 g/m2 but not more than 105 g/m2 and

an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)

of weight of 160 g/m2 or more but not more than 300 g/m2,

whether or not laminated on one side with a membrane or a membrane and aluminium

a weight of 25 g/m2 or more but not more than 150 g/m2,

in the piece or simply cut into squares or rectangles,

not impregnated,

with cross-directional or machine-directional stretch properties

90 % (± 1,5 %) of aluminium oxide

7 % (± 1 %) of titanium oxide

2 % or more of diboron trioxide,

28 % or less of silicon dioxide and

60 % or more of dialuminium trioxide

66 % or more of silicon carbide,

15 % or more of aluminium oxide

of a thickness of 4,0 mm or more but not more than 4,2 mm,

with a light transmission of 91 % or more measured using a D-type light source,

coated on one surface with a fluorine doped tin dioxide reflective layer

with a thickness of 1,7 mm or more but not more than 1,9 mm,

with light transmission of 91 % or more, measured with a D-type light source,

coated on one side with fluorine-doped tin dioxide as a reflecting layer,

with worked edges

whether or not equipped with plastic backing plate,

whether or not equipped with a heating element,

whether or not equipped with Blind Spot Module (BSM) display

a length of 1516 mm (± 1 mm);

a width of 553 mm (± 1 mm);

a thickness of 3 mm (± 0,1 mm);

the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm;

a lead content of not more than 90 mg/kg and

a corrosion resistance of 72 hours or more according to ISO 9227 salt spray test

9 % or more but not more than 16 % of magnesium oxide,

19 % or more but not more than 25 % of aluminium oxide,

0 % or more but not more than 2 % of boron oxide,

without calcium oxide,

10ppm per °C or more but not more than 12ppm per °C in the length and width, and

20ppm per °C or more but not more than 30ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)

78 % or more of dysprosium, and

18 % or more but not more than 22 % of iron

being a self-tapping screw,

with a length of more than 300 mm,

a thickness of 2,67 mm or more, but not more than 4,11 mm,

a width of 12,57 mm or more, but not more than 16,01 mm,

a torque of 18,05 Nm or more, but not more than 73,5 Nm

an angle between the free position and the nominal position in exercise of 76 ° or more, but not more than 218 °

a width of 610 mm or more but not more than 620 mm, and

a diameter of 690 mm or more but not more than 710 mm,

consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or

consisting of multiple layers of paper, impregnated with phenolic resin,

consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

covered on one or both sides with copper foilwith a thickness of not more than 0,15mm and

with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10GHz, as measured according to IPC-TM-650

with a maximum thickness of not more than 25 μm,

coated on both sides with a copper film with a maximum thickness of 0,15mm,

with a minimum capacitance of 1,09pF/mm2,

with at least one layer of woven glass fibre, impregnated with a fire-retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 170 °C (according to IPC-TM-650, method 2.4.25),

coated on one or both sides with a copper film with a thickness of not more than 0,15 mm,

containing 1 mg/kg or less of sodium and

mounted on a copper or aluminium support

anodized

whether or not lacquered

with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %)

in rolls,

of a thickness of 0,14 mm or more but not more than 0,40 mm,

a width of 12,5 mm or more but not more than 359 mm,

a tensile strength of 285 N/mm2 or more, and

an elongation at break of 1 % or more, and

93,3 % or more of aluminium,

2,2 % or more but not more than 5 % of magnesium, and

not more than 1,8 % of other elements

an aluminium content of 99,98 % or more

a thickness of 0,070 mm or more but not more than 0,125 mm

with a cubic texture

having a purity of 99,99 % by weight,

of a thickness of 0,021 mm or more but not more than 0,2 mm,

with a width of 500 mm,

with a surface oxide layer by 3 to 4 nm thick,

and with a cubic texture of more than 95 %

a width of 595 mm or more but not more than 605 mm, and

a diameter of 690 mm or more but not more than 710 mm,

a layer of aluminium foil of a thickness of 70 μm or more but not more than 150 μm,

a water soluble lubricant of a thickness of 20 μm or more but not more than 200 μm and solid at room temperature

of painted aluminium,

with a length of 1011 mm or more but not more than 1500 mm,

with a width of 622 mm or more but not more than 900 mm,

with a thickness of 0,6 mm (± 0,1 mm),

a purity by weight of 99 % or more and

a particle size of 1,0 μm or more, but not more than 5,0 μm

of purity by weight of 99,5 % or more,

with a particle size of 0,2 mm or more but not more than 0,8 mm

35 % (± 2 %) cobalt,

25 % (± 1 %) nickel,

19 % (± 1 %) chromium and

7 % (± 2 %) iron

22 % (± 3 %) of vanadium and

4 % (± 0,5 %) of aluminium

exhaust systems for internal combustion engines or

tubes and pipes of subheading 81089060

0,4 % or more but not more than 0,6 % of aluminium,

0,35 % or more but not more than 0,55 % of silicon and

0,1 % or more but not more than 0,3 % of niobium

15 % (± 1 %) of vanadium

3 % (± 0,5 %) of chromium

3 % (± 0,5 %) of tin and

3 % (± 0,5 %) of aluminium

0,3 % or more but not more than 0,7 % of aluminium and

0,25 % or more but not more than 0,6 % of silicon

self-propelled lawn mowers with a seat of subheading 84331151, and hand-operated lawn mowers of heading 84331190,

tractors of subheading 87019011, whose main function is that of a lawn mower,

four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 84332010 or

snowploughs and snow blowers of subheading 843020

6 cylinders,

an output of 75 kW or more, but not more than 80 kW,

inlet and exhaust valves modified to operate continuously in heavy duty applications,

a capacity of not more than 3850 cm3, and

a rated output of 15 kW or more but not more than 55 kW,

a capacity of not more than 3850 cm3,

a rated output of 55 kW or more but not more than 85 kW,

of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,

with a heat-resistance of not more than 1100 °C;

with a diameter of 30 mm or more, but not more than 80 mm;

with a height of 30 mm or more, but not more than 50 mm

of a stainless alloy,

with a heat-resistance of not more than 1050 °C,

with a diameter of 100 mm or more, but not more than 200 mm,

with a height of 100 mm or more, but not more than 150 mm,

whether or not with an engine exhaust manifold

with a built-in conducting horn and connecting sleeve,

of a stainless steel alloy,

with conducting horns having an operating distance of 20 mm,

with a length of not more than 350 mm,

with a diameter of not more than 75 mm,

with a height of not more than 50 mm

discharging at least 400 cm3 fluid per minute,

with a noise level limited to 6 dBA,

with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, and

working at ambient temperatures down to -10 °C

with an electric motor,

of an output of not more than 125 W

a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm (± 1,0 mm),

a diameter of 95mm (± 0,6 mm) or 102 mm (± 0,6 mm),

an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70 °C (± 5 °C),

a voltage of 14,4 V or more but not more than 42 V,

an amperage of 10 A or more but not more than 42 A,

an opening pressure of not more than 800 kPa

an external diameter not more than 37 mm

a solenoid pilot valve

a brass valve body including valve slider and copper connections

a minimum enclosing pressure of 30 kgf/cm2,

a minimum withstanding pressure of 45 kgf/cm2,

a core plunger,

a sealing plunger,

a 220 V-240 V AC 50/60 Hz solenoid coil,

a working pressure up to 4,3 MPa,

a housing

of precision-cast grey cast iron complying with standard DIN EN 1561,

with oil chambers,

without bearings,

with a diameter of 60 mm or more, but not more than 180 mm,

with a height of 60 mm or more, but not more than 120 mm,

whether or not with water chambers and connectors

a rated torque of 50 Nm or more but not more than 7000 Nm,

standard ratios of 1:50 or more but not more than 1:270,

lost motion of not more than one arc minute,

an efficiency of more than 80 %,

a rated torque of 25 Nm or more, but not more than 70 Nm,

standard gear ratios of 1:12.7 or more, but not more than 1:64.3

not more than 3 gears,

an automatic deceleration system and

a power reversal system,

with a rotor speed of 3500 rpm or more but not more than 5000 rpm loaded and not more than 6500 rpm when not loaded

with a power supply voltage of 100 V or more but not more than 240 V

an angle of step of 7,5 ° (± 0,5 °),

a pull-out torque at 25 °C of 25 mNm or more,

a pull-out pulse rate of 1960 pps or more,

a two-phase winding, and

a rated voltage of 10,5 V or more, but not more than 16,0 V

a multiple-phase winding,

an external diameter of 30 mm or more but not more than 80 mm,

a rated speed of not more than 15000 rpm,

an output of 45 W or more but not more than 300 W and

a supply voltage of 9 V or more but not more than 25 V

an external diameter of 90 mm or more, but not more than 110 mm,

a rated speed of not more than 3680 rpm,

an output of 600 W or more but not more than 740 W at 2300 rpm and at 80 °C,

a supply voltage of 12 V,

a torque of not more than 5,67 Nm,

a rotor position sensor,

an electronic star-point relay, and

for use with an electric power steering control module

an external diameter of 27,5 mm or more, but not more than 45 mm,

a rated speed of 11000 rpm or more, but not more than 23200 rpm,

a rated supply voltage of 3.6 V or more, but not more than 230 V,

an output power of not more than 529 W,

a free load current of not more than 3.1 A,

a maximum efficiency of 54 % or more,

an input voltage of 264 V or more, but not more than 391 V,

an external diameter of 81 mm (± 2,5 mm) or more, but not more than 150 mm (± 0,8 mm),

an output power of not more than 125 W,

E or B class winding insulation,

an external diameter of 80 mm or more, but not more than 100 mm,

a supply voltage of 12 V,

an output at 20 °C of 300 W or more, but not more than 550 W,

a torque 20 °C of 2,90 Nm or more, but not more than 5,30 Nm,

a rated speed at 20 °C of 600 rpm or more, but not more than 1200 rpm,

equipped with the rotor angle position sensor of resolver type or Hall effect type,

an AC or DC motor whether or not with transmission,

power electronics

an output of 340 W or more but not more than 7,4 kW,

a flange of dimensions of not more than 180 mm × 180 mm, and

a length from flange to extreme end of resolver of not more than 271 mm

consisting of at least phosphoric acid fuel cells,

in a housing with integrated water management and gas treatment,

for permanent, stationary energy supply

with a capacity of 1 kVA or less

without plugs or cables,

with two output connectors

with two input connectors which are available and useable in parallel

able to switch between bright and dimmed operation mode

with an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 % – 15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or

with an input voltage of 230 V (+ 20 % – 15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or

with an input voltage of 120 V (15 % – 35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode

with an input current reaching 80 % of its nominal value within 20 ms

with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions

with an maximum inrush current overshoot of not more than 250 % of the input current

with a period of the inrush current overshoot of not more than 100 ms

with an input current undershoot of not less than 50 % of the input current

with a period of the inrush current undershoot of not more than 20 ms

with a presettable output current

with an output current reaching 90 % of its nominal pre-set value within 50 ms

with an output current reaching zero within 30 ms after removal of the input voltage

with an defined failure status in case of no-load or too-high load (end-of-life function)

a rated power of not more than 250 W

an input voltage of 90 V or more, but not more than 305 V

a certified input frequency of 47 Hz or more, but not more than 440 Hz

a constant current output of 350 mA or more, but not more than 15 A

an inrush current of not more than 10 A

an operating temperature range of – 40 °C or more, but not more than + 85 °C,

suitable for driving of LED-illuminants

power transistors,

integrated circuits,

whether or not containing diodes and with or without thermistors,

an operating voltage of not more than 600 V,

not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and

a rms (root mean square) current rating of not more than 15,7 A

one or six 3-phase motor outputs with maximum 3 × 32 A,

a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DC

a logic power input of 24 V DC,

an EtherCat communication interface,

and a dimension of 150 × 140 × 120 mm or more, but not more than 335 × 430 × 179 mm

power transistors,

integrated circuits,

whether or not containing diodes and with or without thermistors,

a circuit configuration,

either containing a direct drive stage with an operating voltage of more than 600 V,

or containing a direct drive stage with an operating voltage of not more than 600 V and a rms current of more than 15,7 A,

or including one or more power factor correction modules

an inductance of 4,7 μH (± 20 %),

a DC resistance of not more than 0,1 Ohms,

an insulation resistance of 100 MOhms or more at 500 V (DC)

a power consumption of not more than 6 W,

an insulation resistance of more than 100 M ohms, and

an insert hole of 11,4 mm or more, but not more than 11,8 mm

a length of 15 mm or more but not more than 52 mm,

a width of 5 mm or more but not more than 42 mm,

a diameter of not more than 45 mm,

a height of not more than 45 mm,

with a diameter of not more than 90 mm,

whether or not containing a hole in the centre,

consisting of an alloy of neodymium, iron and boron, covered with nickel, that after magnetisation is intended to become permanent magnet,

a length of 15 mm or more but not more than 105 mm,

a width of 5 mm or more but not more than 105 mm,

a height of 3 mm or more but not more than 55 mm

a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge,

a liquid electrolyte,

a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1mm)

a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)

a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1mm)

a weight of 45,9 kg or 46,3 kg

a rating of 75 Ah and

a nominal voltage of 60 V

a length of 1475 mm or more, but not more than 2200 mm

a width of 935 mm or more, but not more than 1400 mm

a height of 260 mm or more, but not more than 310 mm

a weight of 320 kg or more, but not more than 390 kg

a nominal capacity of 18,4 Ah or more, but not more than 130 Ah,

put up in packs of 12 or 16 modules

a length of 1203 mm or more, but not more than 1297 mm,

a width of 282 mm or more, but not more than 772 mm,

a height of 792 mm or more, but not more than 839 mm,

a weight of 260 kg or more, but not more than 293 kg,

power of 22 kWh or 26 kWh, and

constituted of 24 or 48 modules

a length of 298 mm or more, but not more than 408 mm,

a width of 33,5 mm or more, but not more than 209 mm,

a height of 138 mm or more, but not more than 228 mm,

a weight of 3,6 kg or more, but not more than 17 kg, and

a power of 458 kWh or more, but not more than 2158 kWh

a base similar to an ellipse squeezed in the middle,

a length of 49 mm or more (not including terminals),

a width of 33,5 mm or more,

a thickness of 9,9 mm or more,

a rated capacity of 1,75 Ah or more, and

a rated voltage of 3,7 V,

some of the corners rounded off,

a length of 76 mm or more (not including terminals),

a width of 54,5 mm or more,

a thickness of 5,2 mm or more,

a rated capacity of 3100 mAh or more, and

a rated voltage of 3,7 V,

a length of 1213 mm or more, but not more than 1575 mm,

a width of 245 mm or more but not more than 1200 mm,

a height of 265 mm or more, but not more than 755 mm,

a weight of 265 kg or more but not more than 294 kg,

a nominal capacity of 66,6 Ah,

3,5 VDC to 3,8 VDC,

300 mAh to 900 mAh and

a diameter of 10,0 mm to 14,5 mm

of a length of 350 mm or 312 mm,

of a width of 79,8 mm or 225 mm,

of a height of 168 mm or 35 mm,

of a weight of 6,2 kg or 3,95 kg,

with a rating of 129 Ah or 66,6 Ah

a metal casing,

a length of 173 mm (± 0,15 mm),

a width of 21 mm (± 0,1 mm),

a height of 91 mm (± 0,15 mm),

a nominal voltage of 3,3 V and,

a nominal capacity of 21 Ah or more

a metal casing,

a length of 171 mm (± 3 mm),

a width of 45,5 mm (± 1 mm),

a height of 115 mm (± 1 mm),

a nominal voltage of 3,75 V and

a nominal capacity of 50 Ah

a width of 70 mm (± 5 mm),

a thickness of 0,4 mm (± 0,2 mm),

a length of not more than 55 mm,

are connected by wire or radio frequency to each other and the motor controller card, and

regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,

whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)

with two electrical contacts,

with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),

with a protective paper film on both sides

fitted with a motor having a power rating of 8 W at 4600 rpm,

governed by an electronic circuit,

operating at ambient temperatures above 110 °C,

fitted with a thermoregulator

containing side and central openings,

of annealed aluminium,

with a ceramic coating, heat resistant to more than 200 °C

an impedance of 4 Ohm or more, but not more than 16 Ohm,

a nominal power of 2 W or more, but not more than 20 W,

with or without plastic bracket, and

with or without electric cable fitted with connectors,

without a hard disk drive,

with or without a DVD-RW drive,

with either motion detection or capability of motion detection through IP connectivity via LAN connector

with or without a USB serial port,

a printed circuit,

a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,

not more than 3 connectors,

not more than 1 transistor,

not more than 3 variable and 4 fixed resistors,

not more than 5 capacitors,

a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,

a microprocessor capable of receiving remote control messages and controlling the tuner chipset,

a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,

a radio frequency (RF) remote control receiver,

an infrared remote control signal transmitter,

a SCART signal generator

a TV state sensor

a laser diode,

a laser driver integrated circuit,

a photo detector integrated circuit,

a front monitor integrated circuit and an actuator,

laser diodes operating at three different wavelengths,

a photo detector integrated circuit and

an actuator,

an optical pick up unit with laser diodes operating at three different wavelengths,

a spindle motor,

a stepping motor

a sensitivity in the wavelength area of 8 μm or more, but not more than 14 μm,

a resolution of 324 × 256 pixels,

a weight of not more than 400 g,

measurements of not more than 70 mm × 67 mm × 75 mm,

a waterproof housing and an automotive- qualified plug and

a deviation of the output signal over the entire work temperature range of not more than 20 %

of a weight of not more than 5,9 kg,

without a housing,

of dimensions of not more than 405 mm × 315 mm,

with a single Charge-Couple-Device (CCD) or Complementary Metal–Oxide–Semiconductor (CMOS) sensor,

with effective pixels of not more than 5 megapixels,

a Dynamic overlay lines system,

an output NTSC video signal,

a voltage of 6,5 V,

an illuminance of 0,5 lux or more

a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner,

a hard disk drive supporting multiple maps,

a HD radio,

a voice recognition system,

a CD and DVD drive,

Bluetooth, MP3 and USB input connectivity,

a voltage of 10 V or more but not more than 16 V,

an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,

a transformer and

a radio broadcast receiver

a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110 mm and equipped with a deflector yoke, and

a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,

without a housing, with back cover and mounting frame,

or with a housing,

the generation of driving signals for pixel addressing, or

driving addressing pixels

one or more TFT glass or plastic cells,

a die cast heat sink,

a backlight unit,

one printed circuit board with micro controller, and

LVDS (Low Voltage Differential Signalling) interface,

AC socket (for power cord connection) of 230 V,

integrated noise filter composed of capacitors and inductors,

cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

with backlight, micro-controller,

with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,

in a housing with or without a heat sink at the back of the housing,

without a signal-processing module,

of an aluminium alloy containing silicon and magnesium,

with a length of 900 mm or more but not more than 1500 mm,

with a width of 600 mm or more but not more than 950 mm,

consisting of an IGBT transistor chip and a diode chip on one or more lead frames,

for a voltage of 600 V or 1200 V

a voltage of 240 V or more but not more than 250 V,

an amperage of 4 A or more but not more than 6 A,

a voltage of 240 V or more but not more than 300 V,

an amperage of 3 A or more but not more than 15 A,

a pulse transformer, including a wide-band ferrite core,

a common mode coil,

a resistor,

a capacitor,

having an operating temperature of -20 °C or more, but not more than 70 °C,

having a signal transmission speed of not more than 25 Mbps,

having a supply voltage of -0,5 V or more, but not more than 7 V,

having an input voltage of -0,5 V or more, but not more than 7,5 V,

without an integrated circuit,

microprocessor relays,

a stepper motor,

Electrically Erasable Programmable Read-Only (EEPROM) memory, and

other passive components (such as connectors, diodes, voltage stabilizer, resistors, capacitors, transistors),

whether or not with a housing

with electrical leads,

including one or more light-emitting semiconductor chips which may be electrically connected among each other and which may be furnished for their protection with one or multiple protective diodes,

formed/shaped as an indivisible entity

for use in the manufacture of lighting gear employed for solid state lighting / for general lighting purposes

a mains power/ CAN (Controller area network) output socket,

a universal serial bus (USB) and audio IN/OUT ports and

incorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),

a voltage of not more than 60 V,

a current of not more than 1 A,

a heat resistance of not more than 105 °C,

individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),

a distance between conductors of not more than 0,5 mm and

a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm

a voltage of 1,25 V (± 0,25 V)

connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,

outer screening shielding,

10 or 80 individual wires,

a length of 50 mm or more, but not more than 800 mm,

connector(s) and/or plug(s) fitted at one or both ends,

operating within the service brake disk,

with a diameter of 170 mm or more but not more than 175 mm,

of circular cross-section,

with a length of 1249,68 mm or more, but not more than 1496,06 mm,

of an external diameter of 81,356 mm or more, but not more than 82,2198 mm,

swaged on both ends to an external diameter of 63,8683 mm or more, but not more than 66,802 mm,

heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772

a poly(methyl methacrylate) core,

a cladding of fluorinated polymer,

a diameter of not more than 3,0 mm, and

a length of more than 150 m,

having a total thickness of 100 μm or more, but not more than 240 μm,

having a total transmittance of more than 55 % but not more than 65 %, determined by standard method JIS K7105 related to ASTM D1003 and

haze more than 70 % but not more than 80 %, determined by standard method JIS K7105 related to ASTM D1003

whether or not cut,

whether or not printed,

measuring not more than 80 mm × 55 mm × 50 mm,

with a resolution of 160 lines/mm or better, and

with a zoom ratio of 18 times,

measuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,

with a resolution of 130 lines/mm or better, and

with a zoom ratio of 18 times

measuring not more than 125 mm × 65 mm × 65 mm,

with a resolution of 125 lines/mm or better, and

with a zoom ratio of 16 times

measuring not more than 180 mm×100 mm×100 mm at a maximum focal length of more than 200 mm,

with an etendue of 7 steradian mm2 or better, and

with a zoom ratio of 16 times

a combination of one or more monolithic application-specific integrated circuits (ASIC) and

at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

a monolithic integrated circuit in a housing, and

one or more discrete SMD capacitors connected in parallel to the integrated circuit

whether or not with integrated permanent magnets

a combination of one or more monolithic application-specific integrated circuits (ASIC) and

one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, and

a flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor

a plastic casing,

one or more light emitting diode chips either chips manufactured using thin-film technology or so-called sapphire emitter chips and

one or more optional semiconductor chips with electric protection function.

for use in the manufacture of lighting gear employed for general lighting purposes

a casing made of ceramic or circuit board material,

one or more light emitting diode chips either chips manufactured using thin-film technology or so-called sapphire emitter chips

one or more optional semiconductor chips with electric protection function

for use in the manufacture of lighting gear employed for general lighting purposes

ANNEX II

CN code TARIC Supplementary unit ex69091900 15 Number of Items (p/st) ex70200010 10 p/st ex76169990 77 p/st ex69091900 80 p/st ex70060090 70 p/st ex70099100 10 p/st 70112000 p/st ex73209010 91 p/st ex73259910 20 p/st ex76042100 10 p/st ex76042990 30 p/st ex76130000 20 p/st ex76169990 15 p/st ex76169990 70 p/st ex84828000 10 p/st ex88033000 40 p/st ex76169990 75 p/st ex81089090 20 p/st ex90039000 10 p/st ex82073010 10 p/st ex83016000 10 p/st ex84139100 20 p/st ex84199085 20 p/st ex84389000 10 p/st ex84689000 10 p/st ex84769000 10 p/st ex84799080 87 p/st ex84819000 20 p/st ex85030099 45 p/st ex85159000 20 p/st ex85319085 20 p/st ex85369085 96 p/st ex85439000 50 p/st ex87089199 10 p/st ex87089997 30 p/st ex90319085 30 p/st ex83099090 10 p/st ex84059000 10 p/st ex84099100 10 p/st ex84099900 20 p/st ex84099900 10 p/st ex84799080 85 p/st ex84119900 30 p/st ex84149000 20 p/st ex84149000 30 p/st ex84149000 40 p/st ex84159000 20 p/st ex84189910 50 p/st ex84189910 60 p/st ex84219900 91 p/st ex84219900 93 p/st ex84223000 10 p/st ex84798997 30 p/st ex84312000 30 p/st ex84399900 10 p/st ex84679900 10 p/st ex85365011 35 p/st ex84778099 10 p/st ex84798997 40 p/st ex84798997 50 p/st ex84799080 80 p/st ex84813091 91 p/st ex84818059 10 p/st ex84818069 60 p/st ex84818079 20 p/st ex84818099 50 p/st ex84818099 60 p/st ex84833038 30 p/st ex84834029 50 p/st ex84834051 20 p/st ex84834059 20 p/st ex84834090 80 p/st ex85030091 31 p/st ex85030099 32 p/st ex85030099 31 p/st ex85030099 33 p/st ex85030099 34 p/st ex85030099 35 p/st ex85030099 40 p/st ex85044082 40 p/st ex85044082 50 p/st ex85044090 20 p/st ex85044090 30 p/st ex85044090 40 p/st ex85045095 20 p/st ex85045095 40 p/st ex85045095 50 p/st ex85049011 10 p/st ex85051100 31 p/st ex85051100 33 p/st ex85051100 35 p/st ex85051100 50 p/st ex85052000 30 p/st ex85059020 91 p/st ex85079080 70 p/st ex85087000 10 p/st ex85371099 96 p/st ex85169000 60 p/st ex85169000 70 p/st ex85183095 20 p/st ex85189000 91 p/st ex85229049 50 p/st ex85229049 60 p/st ex85299065 25 p/st ex85229049 65 p/st ex85299065 40 p/st ex85229049 70 p/st ex85229080 15 p/st ex85229080 30 p/st ex85299092 30 p/st ex85229080 65 p/st ex85229080 70 p/st ex85229080 75 p/st ex85229080 80 p/st ex85229080 81 p/st ex85229080 83 p/st ex85229080 84 p/st ex85229080 85 p/st ex85229080 96 p/st ex85229080 97 p/st ex85299065 50 p/st ex85291080 20 p/st ex85291080 50 p/st ex85291080 60 p/st ex85299065 30 p/st ex85489090 44 p/st ex85299065 45 p/st ex85299065 55 p/st ex85299065 60 p/st ex85299065 65 p/st ex85299065 70 p/st ex85299065 75 p/st ex85299092 25 p/st ex85299092 32 p/st ex85299092 40 p/st ex85299092 41 p/st ex85299092 42 p/st ex85299092 43 p/st ex85299092 44 p/st ex85299092 45 p/st ex85299092 47 p/st ex85299092 48 p/st ex85299092 49 p/st ex85366990 83 p/st ex85299092 50 p/st ex85299092 70 p/st ex85318095 40 p/st ex85359000 20 p/st ex85359000 30 p/st ex85365080 83 p/st ex85363030 11 p/st ex85364900 91 p/st ex85365011 31 p/st ex85365011 32 p/st ex85365019 91 p/st ex85365019 93 p/st ex85365080 97 p/st ex85365080 81 p/st ex85365080 82 p/st ex85365080 93 p/st ex85365080 98 p/st ex85366990 51 p/st ex85366990 81 p/st ex85366990 82 p/st ex85366990 84 p/st ex85366990 85 p/st ex85366990 86 p/st ex85366990 87 p/st ex85366990 88 p/st ex85367000 10 p/st ex85367000 20 p/st ex85369085 92 p/st ex85369085 94 p/st ex85444993 10 p/st ex85369085 97 p/st ex85371091 30 p/st ex85371099 92 p/st ex85371099 93 p/st ex85371099 94 p/st ex85437090 20 p/st ex85371099 97 p/st ex85389099 92 p/st ex85437090 30 p/st ex85437090 35 p/st ex85437090 40 p/st ex85437090 45 p/st ex85437090 55 p/st ex85437090 60 p/st ex85437090 65 p/st ex85437090 80 p/st ex85437090 85 p/st ex85437090 95 p/st ex85439000 20 p/st ex85439000 30 p/st ex85439000 40 p/st ex85444290 10 p/st ex85451900 20 p/st ex85471000 10 p/st ex85489090 41 p/st ex85489090 43 p/st ex85489090 47 p/st ex85489090 48 p/st ex85489090 49 p/st ex85489090 50 p/st ex87083091 10 p/st ex87089997 20 p/st ex88033000 50 p/st ex90019000 75 p/st ex90029000 20 p/st ex90029000 30 p/st ex90029000 40 p/st ex90129090 10 p/st ex90132000 10 p/st ex90132000 20 p/st ex90132000 30 p/st ex90229000 10 p/st ex90318034 30 p/st ex90318038 10 p/st ex90319085 20 p/st ex90328900 20 p/st ex90328900 30 p/st ex90328900 40 p/st ex94019080 10 p/st ex94054035 10 p/st ex94054039 10 p/st ex94054039 20 p/st ex95030075 10 p/st ex95030095 10 p/st ex39199000 36 Square meter (m2) ex39199000 44 m2 ex39204910 95 m2 ex39219060 95 m2 ex56031110 10 m2 ex56031110 20 m2 ex56031190 10 m2 ex56031190 20 m2 ex56031210 10 m2 ex56031290 10 m2 ex56031290 50 m2 ex56031290 60 m2 ex56031290 70 m2 ex56031310 10 m2 ex56031310 20 m2 ex56031390 60 m2 ex56031390 70 m2 ex56031410 10 m2 ex56039110 10 m2 ex56039190 10 m2 ex56039210 10 m2 ex56039290 10 m2 ex56039290 40 m2 ex56039290 80 m2 ex56039390 10 m2 ex56039390 50 m2 ex38249097 90 Cubic Metre (m3) ex39011090 20 m3 ex39012090 10 m3 ex39021000 50 m3 ex39031100 10 m3 ex39039090 10 m3 ex39074000 50 m3 ex39074000 60 m3 ex39076080 40 m3 ex39202080 95 m3 ex54024900 70 Metre (m) ex32151900 20 Litre (l)

Versions

  1. 2013-12-17

Cited by